2 Geometry Questions thank you guys :):)

 The maximum error on volume = 270cm³

The relative error on the volume =0.08

The percentage error on volume = 8%.

How to calculate the volume of a given cube?

To calculate the volume of a given cube, the following steps should be taken as follows:

Formula for volume of a cube = a³

where;

a = 15 cm

Volume(V) = 15³ = 3375cm³

The maximum error on volume(dV);

= 3×side²×dx

= 3×15²×0.4cm

= 270cm³

The relative error on the volume;

= dV/V

= 270/3375

= 0.08

The percentage error on volume;

=Relative error × 100

= 0.08× 100

= 8%

Answer:

Step-by-step explanation:

The vertical asymptotes are found where a denominator factor is zero (and there is no corresponding numerator factor to cancel it). Here, that is at x = 7.

There is no horizontal asymptote because the numerator is of higher degree than the denominator.

When you divide the numerator by the denominator, you get ...

  y = (x +9) +60/(x -7)

Then when x gets large, the behavior is governed by the terms not having a denominator: y = x +9. This is the equation of the slant asymptote.

The function y = (x^2 + 2x - 3) / (x - 7) has a vertical asymptote at x = 7 and a slant asymptote at y = x. It does not have a horizontal asymptote.

The function given is y = (x^2 + 2x - 3) / (x - 7). When identifying the asymptotes, we need to consider three types: horizontal, vertical, and slant.

For vertical asymptotes, we look for values of x that make the denominator of the function zero. In this case, x = 7 is a vertical asymptote.

For horizontal or slant asymptotes, we compare the degree of the polynomial in the numerator with the degree of the polynomial in the denominator. Since the degree of the numerator (which is 2) is larger than the degree of the denominator (which is 1), there's no horizontal asymptote. However, we have a slant asymptote which is determined by long division of the polynomials or using synthetic division.  

The slant asymptote is therefore y = x.

https://brainly.com/question/32503997

#SPJ2

Answer:

[tex]48\ cubes[/tex]

Step-by-step explanation:

we know that

The volume of the rectangular prism is equal to

[tex]V=6\ unit^{3}[/tex]

step 1

Find the volume of one cube

The volume of the cube is equal to

[tex]V=b^{3}[/tex]

where

b is the side length of the cube

we have

[tex]b=\frac{1}{2}\ unit[/tex]

substitute

[tex]V=(\frac{1}{2})^{3}[/tex]

[tex]V=\frac{1}{8}\ unit^{3}[/tex]

step 2

To find out the number of cubes needed to fill the prism, divide the volume of the rectangular prism by the volume of one cube

so

[tex]6/(1/8)=48\ cubes[/tex]

Answer:

Step-by-step explanation:

Since we don't have the information we need to fit this into an exponential equation, we will do it the simple way, using recursion.  We will take the value of the car and subtract from it the depreciation, using the value at the end of one calculation as the initial value of the one following.  Here's where it gets tricky, though.  If the car's value at the end of a calculation is 80% of its initial value, then it depreciates 20%.  Here is what the equation looks like after one year:

2,700,000 - .2(2,700,000) = 2,160,000

We subtracted away 20% of the initial to get the new initial.  Now we use that value in the next recursion.

2,160,000 - .2(2,160,000) = 1,728,000

This is the value of the car after 2 years.

If we continue this process, we would find that after the 8th year, the car's value drops below 500,000 (namely, $452,984.83)

Answer:

22π

Step-by-step explanation:

The area formula for a sector is

[tex]A=\frac{\theta }{360}*\pi  r^2[/tex]

The angle theta is to be the angle that is a part of the sector for which we are trying to find the area.  If we are looking for the area of the larger sector, we are not using 140 as our angle theta, we are using 360 - 140 = 220 as our angle theta since that is the angle for the larger of the 2 sectors.  Filling in our formula using r = 6:

[tex]A=\frac{220}{360}*36\pi[/tex]

The easiest way to handle this math is to multiply the 220 by the 36, hit enter on your calculator, then divide that product by 360.  When you do that your answer, in terms of pi, is 22π

Answer:

  b.  (1, 3, ­-2)

Step-by-step explanation:

A graphing calculator or scientific calculator can solve this system of equations for you, or you can use any of the usual methods: elimination, substitution, matrix methods, Cramer's rule.

It can also work well to try the offered choices in the given equations. Sometimes, it can work best to choose an equation other than the first one for this. The last equation here seems a good one for eliminating bad answers:

  a: -1 -5(1) +2(-4) = -14 ≠ -18

  b: 1 -5(3) +2(-2) = -18 . . . . potential choice

  c: 3 -5(8) +2(1) = -35 ≠ -18

  d: 2 -5(-3) +2(0) = 17 ≠ -18

This shows choice B as the only viable option. Further checking can be done to make sure that solution works in the other equations:

  2(1) +(3) -3(-2) = 11 . . . . choice B works in equation 1

  -(1) +2(3) +4(-2) = -3 . . . choice B works in equation 2

After substituting the given values from each option into the system of equations, (1, 3, -2) is found to satisfy all three equations. Hence, the correct option is b.

The solution to the system of equations:

2x + y - 3z = 11

-x + 2y + 4z = -3

x - 5y + 2z = -18

can be found using methods such as substitution, elimination, or matrix inversion. In this case, we can find the solution by either of these methods. To check which option is the solution, we can substitute the given (x, y, z) values from each option into the system of equations and see which one satisfies all three equations.

For option a: (-1, 1, -4)

2(-1) + 1 - 3(-4) = -2 + 1 + 12 = 11

-(-1) + 2(1) + 4(-4) = 1 + 2 - 16 = -13

(-1) - 5(1) + 2(-4) = -1 - 5 - 8 = -14
This option does not satisfy the second and third equations.
For option b: (1, 3, -2)

2(1) + 3 - 3(-2) = 2 + 3 + 6 = 11

-(1) + 2(3) + 4(-2) = -1 + 6 - 8 = -3

(1) - 5(3) + 2(-2) = 1 - 15 - 4 = -18

This option satisfies all three equations, hence, it is the correct solution.

Answer:

The width the asymptote rectangle is 8 units

The height the asymptote rectangle is 4 units

Step-by-step explanation:

* Lets explain how to solve this problem

- The equation of the hyperbola is x² - 4y² - 2x + 16y - 31 = 0

- The standard form of the equation of hyperbola is

  (x - h)²/a² - (y - k)²/b² = 1 where a > b

- The length of the transverse axis is 2a (the width of the rectangle)

- The length of the conjugate axis is 2b (the height of the rectangle)

- So lets collect x in a bracket and make it a completing square and

  also collect y in a bracket and make it a completing square

∵ x² - 4y² - 2x - 15 = 0

∴ (x² - 2x) + (-4y²) - 15 = 0

- Take from the second bracket -4 as a common factor

∴ (x² - 2x) + -4(y²) - 15 = 0

∴ (x² - 2x) - 4(y²) - 15 = 0

- Lets make (x² - 2x) completing square

∵ √x² = x

∴ The 1st term in the bracket is x

∵ 2x ÷ 2 = x

∴ The product of the 1st term and the 2nd term is x

∵ The 1st term is x

∴ the second term = x ÷ x = 1

∴ The bracket is (x - 1)²

∵  (x - 1)² = (x² - 2x + 1)

∴ To complete the square add 1 to the bracket and subtract 1 out

   the bracket to keep the equation as it

∴ (x² - 2x + 1) - 1 = (x - 1)² - 1

- Lets put the equation after making the completing square

∴ (x - 1)² - 1 - 4(y²) - 15 = 0 ⇒ simplify

∴ (x - 1)² - 4(y)² - 16 = 0 ⇒ add the two side by 16

∴ (x - 1)² - 4(y)² = 16 ⇒ divide both sides by 16

∴ (x - 1)²/16 - y²/4 = 1

∴ (x - 1)²/16 - y²/4 = 1

∴ The standard form of the equation of the hyperbola is

  (x - 1)²/16 - y²/4 = 1

∵ The standard form of the equation of hyperbola is

  (x - h)²/a² - (y - k)²/b² = 1

∴ a² = 16 and b² = 4

∴ a = 4 , b = 2

∵ The width the asymptote rectangle is 2a

∴ The width the asymptote rectangle = 2 × 4 = 8 units

∵ The height the asymptote rectangle is 2b

∴ The height the asymptote rectangle = 2 × 2 = 4 units

Answer:

[tex]w=8\\h=4[/tex]

Step-by-step explanation:

The given equation is

[tex]x^{2} -4y^{2}-2x-15=0[/tex]

First, we complete squares for each variable to find the explicit form of the hyperbola.

[tex]x^{2} -2x-4y^{2}=15\\x^{2} -2x+(\frac{2}{2} )^{2} -4y^{2} =15+1\\ (x-1)^{2}-4y^{2}=16\\\frac{(x-1)^{2} }{16} -\frac{4y^{2} }{16} =\frac{16}{16}\\\frac{(x-1)^{2} }{16} -\frac{y^{2} }{4}=1[/tex]

Now that we have the explicit form, you can observe that [tex]a^{2}=16 \implies a=4[/tex] and [tex]b^{2}=4 \implies b=2[/tex].

On the other hand, the width of the asymptote rectangle is [tex]2a[/tex] and the height is [tex]2b[/tex].

Therefore, the dimensions are 8 by 4.

[tex]2(4)=8\\2(2)=4[/tex]

Answer:

The coordinates of D' are (1,-1)

Step-by-step explanation:

The point D in the figure has co-ordinates (2,-2) as shown in the figure.

The figure is dilated by a factor of 1/2

So, multiply the coordinates of D (2,-2) by 1/2

D' = (1/2*2, 1/2*-2)

D' = (1,-1)

So, the coordinates of D' are (1,-1)

Answer:

-27a³b⁶+ 8a⁹b¹²

Step-by-step explanation:

In the expression above -27 is a perfect cube of -3, 8 is a perfect cube of 2.

The exponents of a and b in both terms in the expression are divisible by 3.

The cube root of x, that is ∛xⁿ=x∧(n/3) where n is an integer.

ANSWER

[tex]- 27 {a}^{3} {b}^{6} + 8 {a}^{9} {b}^{12} [/tex]

EXPLANATION

When we can write an expression in the form

[tex] {(x)}^{3} + {(y)}^{3} [/tex]

then it is a sum of cubes.

To write a given sum as sum of cubes, then the coefficients of the terms should cube be numbers and the exponents of any power should be a multiple of 3.

This tells us that the first option will be the best choice.

[tex] - 27 {a}^{3} {b}^{6} + 8 {a}^{9} {b}^{12} [/tex]

We can rewrite this as:

[tex] { (- 3)}^{3} {a}^{3} {b}^{2 \times 3} + {2}^{3} {a}^{3 \times 3} {b}^{4 \times 3} [/tex]

We apply this property of exponents:

[tex] ({a}^{m} )^{n} = {a}^{mn} [/tex]

This gives us

[tex] {( - 3a {b}^{2}) }^{3} + {(2{a}^{3} {b}^{4} })^{3} [/tex]

Therefore the correct option is A

Answer:

x = 70; the labeled angles are 110º and 70º.

Step-by-step explanation:

The full degrees will add up to 180º. There are 2x and +40.

Equation: [tex]2x+40=180[/tex]

Solve: [tex]2x+40=180\\\\180-40=140\\\\2x=140\\\\x=70[/tex]

Since x=70, 70+40 will equal to 110.

Therefore, "x = 70; the labeled angles are 110º and 70º." is correct.

Answer: C

Step-by-step explanation: The numerator is the angle measure, and the denominator is the side length. For angle B, the angle is 47 degrees. The opposite side is b, which is 85. We are finding the angle A, which is the numerator. The side 94 is opposite of angle A.

Answer:

84.4 gallons to the nearest tenth.

Step-by-step explanation:

Average usage = miles travelled  / gallons used  so:

6.3 = 532 / gallons used

Gallons used  =   532 / 6.3

= 84.44.

Final answer:

To find the gallons of gasoline used, divide the total miles (532) by the average miles per gallon (6.3). This calculation results in approximately 84.4444 gallons, which can be rounded to 84.4 gallons of gasoline used.

Explanation:

To calculate the amount of gasoline used by the boater who traveled 532 miles averaging 6.3 miles per gallon, you need to divide the total miles traveled by the average miles per gallon. The formula to use is:

Gallons used = Total miles traveled ÷ Average miles per gallon
Plugging in the values given:

Gallons used = 532 miles ÷ 6.3 miles/gallon
This gives us:

Gallons used = 84.4444... gallons
To round to the nearest tenth of a gallon, we would round 84.4444... to 84.4 gallons. Thus, the boater used approximately 84.4 gallons of gasoline.

Answer:

  A: factor the equation to (x -3)(x +4) = 0

  B: solutions are x=-4, x=3

Step-by-step explanation:

A: Santos has the equation in standard form. Several options for solution are available: graphing (see attached), completing the square, factoring, using the quadratic formula. I find factoring to get to the solution most directly. The other methods work just as well.

To factor the equation, Santos needs to find two factors of -12 that have a sum of +1. Those would be +4 and -3. Putting these numbers into the binomial factors, Santos would have ...

  (x +4)(x -3) = 0

__

B: The values of x that make the factors zero are ...

  x = -4, x = 3

To solve the equation, Santos should first factor the quadratic equation, then use the Zero Product Property to find the solutions, which are x = 3 and x = -4.

For Part A, Santos should factor the quadratic equation x2 + x - 12 = 0. This can be done by finding two numbers that add to 1 (the coefficient of x) and multiply to -12 (the constant term). These numbers are 4 and -3. So the factored form of the equation is (x - 3)(x + 4) = 0.

For Part B, to find the solutions to the proportion, he should use the Zero Product Property which states that if the product of two factors is zero, then at least one of the factors must equal zero. This gives us the solutions x - 3 = 0 and x + 4 = 0. Solving for x in each case provides the solutions: x = 3 and x = -4.

https://brainly.com/question/32403169

#SPJ3

Answer:

Ballistic motion is usually modeled by a quadratic function.

Step-by-step explanation:

The usual assumption is that the only force acting on the object is that due to gravity, and that it is constant and directed downward. With this assumption, along with the assumption of a flat Earth, the resulting model is a downward-opening quadratic function.

Answer:

quadratic function.

Step-by-step explanation: "

ballistic motion is modeled with a quadratic function"

Answer:

C.(5 sqrt(2), 5 sqrt(2)

Step-by-step explanation:

The point which lie on the circle is :

          [tex](5\sqrt{2},5\sqrt{2})[/tex]        

It is given that the circle is centered at origin and has a radius of 10 units.

We know that if (h, k) represents the coordinate of the center of circle and r is the radius of the circle then the equation of circle is given by:

[tex](x-h)^2+(y-k)^2=r^2[/tex]

Here we have:

[tex]h=0\ ,\ k=0\ and\ r=10[/tex]

Hence, the equation of circle is given by:

[tex](x-0)^2+(y-0)^2=10^2\\\\i.e.\\\\x^2+y^2=100------------(1)[/tex]

If we substitute the given point into the equation of the circle and it makes the equation true then the point lie on the circle and if it doesn't make the equation true then the point do not lie on the circle.

a)

[tex](\sqrt{10},0)[/tex]

i.e.  

[tex]x=\sqrt{10}\ and\ y=0[/tex]

i.e. we put these points in the equation(1)

[tex](\sqrt{10})^2+(0)^2=100\\\\i.e.\\\\10=100[/tex]

which is a false statement .

Hence, this point do not lie on the circle.

b)

[tex](0,2\sqrt{5})[/tex]

i.e.

[tex]x=0\ and\ y=2\sqrt{5}[/tex]

i.e. we put these points in the equation(1)

[tex](0)^2+(2\sqrt{5})^2=100\\\\i.e.\\\\20=100[/tex]

which is a false statement .

Hence, this point do not lie on the circle.

c)

 [tex](5\sqrt{2},5\sqrt{2})[/tex]      

i.e.

[tex]x=5\sqrt{2}\ and\ y=5\sqrt{2}[/tex]

i.e. we put these points in the equation(1)

[tex](5\sqrt{2})^2+(5\sqrt{2})^2=100\\\\i.e.\\\\50

+50=100\\\\i.e.\\\\100=100[/tex]

which is a true statement .

Hence, this point  lie on the circle.

Answer:

18 stamp increase

15 % increase

Step-by-step explanation:

To find the increase in number , we take the number of stamps in march and subtract the stamps in october

128-120 = 18

To find the percent increase, we take the number of stamps that we gained over the original amount of stamps * 100%

percent increase = 18/120 * 100%

                              .15 * 100%

                              15% increase

Myra's stamp collection increased by 18 stamps from October to the following March. This is calculated by subtracting the number of stamps she had in October (120 stamps) from the number she had in March (138 stamps).

To find out by how much Myra's stamp collection has increased between October and March, you simply need to subtract the number of stamps she had in October from the number she had in March. She had 120 stamps in October, and by March, she had 138 stamps.

To calculate the increase, we'll use the following steps:

Doing the math:

138 stamps (in March) - 120 stamps (in October) = 18 stamps

So, Myra's collection increased by 18 stamps between October and March.

Answer:

Step-by-step explanation:

The second equation tells you ...

  y = 8 -3x

Using this expression in the first equation gives you ...

  2x +3(8 -3x) = 3

  2x +24 -9x = 3 . . . . . eliminate parentheses

  21 = 7x . . . . . . . . . . .  add 7x -3

  3 = x . . . . . . . . . . . . . . divide by 7

  y = 8 -3×3 = -1 . . . . . . use the second equation to find y

The solution is (x, y) = (3, -1).

Answer:

the correct answers for edu are 2x+3(8-3x)=3 than 3 and last -1

Step-by-step explanation:

The midpoint can be defined using formula,

[tex]M(x_m=\dfrac{x_1+x_2}{2},y_m=\dfrac{y_1+y_2}{2})[/tex]

So by knowing [tex]x_m, x_1[/tex] and [tex]y_m, y_1[/tex] we can calculate [tex]x_2, y_2[/tex]

First we must derive two equations,

[tex]x_m=\dfrac{x_1+x_2}{2}\Longrightarrow x_2=2x_m-x_1[/tex]

and

[tex]y_m=\dfrac{y_1+y_2}{2}\Longrightarrow y_2=2y_m-y_1[/tex]

Then just put in the data,

[tex]x_2=2\cdot(-2)-3=-7[/tex]

[tex]y_2=2\cdot(-3)-0=-6[/tex]

So the other endpoint has coordinates [tex](x,y)\Longrightarrow(-7, -6)[/tex] therefore the answer is D.

Hope this helps.

r3t40

To work out the mid point of two points you, add the x coordinates and divide by 2, and you take the y coordinates and divide by two:

So:

[tex]midpoint = \frac{sum.of.x-coords}{2},  \frac{sum.of.y-coords}{2}[/tex]

------------------------------------

So the x-coords of the midpoint is:

[tex]\frac{sum.of.x-coords}{2}[/tex]

and

y -coords of midpoint is:

[tex]\frac{sum.of.y-coords}{2}[/tex]

------------------------------------

However, in this question we are trying to work out one of the endpoints.

First let's say that the coordinates of the missing endpoint is:

(x , y)

_____________________________________________

That means that the x-coords of the midpoint of (x, y) and the other endpoint (3, 0) is :

[tex]\frac{3 + x}{2}[/tex]

However, we already know the x-coord of the midpoint ( it's -2). So we can form an equation to workout x:

[tex]\frac{3 + x}{2} = -2[/tex]                (multiply both sides by 2)

[tex]3 + x = -4[/tex]                      (subtract 3 from both sides)

[tex]x = -7[/tex]

This is the x-coord of the other endpoint

_______________________________________________

Let's do the same for the y coordinates:

We know y coords for the midpoint of (x, y) and (3, 0) is:

[tex]\frac{0 + y}{2}[/tex]

But we also know the ycoord is -3. So we can form an equation and solve for y:

[tex]\frac{0+y}{2} = -3[/tex]

[tex]\frac{0 + y}{2} = -3[/tex]   (multiply both sides by 2)

[tex]0 + y = -6[/tex]                (simplify)

[tex]y = -6[/tex]

This is the y-coord of the other endpoint

___________________________________

Now we just put these coords together to get the coordinate of the other endpoint:

Endpoint is at:

(x, y)                           (substitute in values that we worked out)

=  (-7, -6)

_________________________________________________

D. (-7, -6)

________________________________________________

Note:

If there is anything you don't quite understand or was unclear

- please don't hesitate to ask below in the comments.

Answer:

The sample size must be greater than or equal to 756

Step-by-step explanation:

The formula to calculate the error of the proportion is the following

[tex]E=z_{\alpha/2}*\sqrt{\frac{p(1-p)}{n}}[/tex]

where p is the proportion, n the sample size, E is the error and z is the z-score for a confidence level of 95%

For a confidence level of 95% [tex]z_{\alpha/2}=1.96[/tex]

We know that for this case [tex]p=0.23[/tex]

We require that the error be 0.03 as maximum

Therefore we solve for the variable n

[tex]z_{\alpha/2}*\sqrt{\frac{p(1-p)}{n}}\leq0.03\\\\1.96*\sqrt{\frac{0.23(1-0.23)}{n}}\leq0.03\\\\\sqrt{\frac{0.23(1-0.23)}{n}}\leq \frac{0.03}{1.96}\\\\(\sqrt{\frac{0.23(1-0.23)}{n}})^2\leq (\frac{0.03}{1.96})^2\\\\\frac{0.23(1-0.23)}{n}\leq (\frac{0.03}{1.96})^2\\\\\frac{0.23(1-0.23)}{(\frac{0.03}{1.96})^2}\leq n\\\\n\geq\frac{0.23(1-0.23)}{(\frac{0.03}{1.96})^2}\\\\n\geq756[/tex]

Answer:

1305

Step-by-step explanation:

Answer:

So (5,1) is the orthocenter.

Step-by-step explanation:

So we have to find the slopes of all three lines in burgundy (the line segments of the triangle). We also need to find the equations for the altitudes with respect from all sides of the triangle (we are looking for perpendicular lines).

The vertical line there is just going to be x=a number so that line is x=3 because all the points on that line are of the form (3,y).  x=3 says we don't care what y is but x will always be 3.  So the line for AY is x=3.

So the altitude of the triangle with respect to that side (that line segment) would be a line that is perpendicular to is which would be a horizontal line y=1.  I got y=1 because it goes through vertex B(9,1) and y=1 is perpendicular to x=3.  

So we now need to find the equations of the other 2 lines.

One line has points A(3,5) and B(9,1).

To find the slope, you may use [tex]\frac{y_2-y_1}{x_2-x_1}[/tex].

Or you could just line up the points vertically and subtract then put 2nd difference over 1st difference.

Like this:

(9 , 1)

-(3  ,5)

----------

6     -4

So the slope is -4/6=-2/3.

So a line that is perpendicular will have opposite reciprocal slope.  That means we are looking for a line with 3/2 as the slope.  We want this line from segment AB going to opposite point Y so this line contains point (3,-2).

Point slope-form is

[tex]y-y_1=m(x-x_1)[/tex] where [tex](x_1,y_1)[/tex] is a point on the line and [tex]m[/tex] is the slope.

So the line is:

[tex]y-(-2)=\frac{3}{2}(x-3)[/tex]

[tex]y+2=\fac{3}{2}x-\frac{9}{2}[/tex]

Subtract 2 on both sides:

[tex]y=\frac{3}{2}x-\frac{9}{2}-2[/tex]

Simplify:

[tex]y=\frac{3}{2}x-\frac{13}{2}[/tex].

Let's find the the third line but two lines is plenty, really. The othorcenter is where that perpendicular lines will intersect.

Now time for the third line.

BY has points (9,1) and (3,-2).

The slope can be found by lining up the points vertically and subtracting, then put 2nd difference over 1st difference:

(9  ,1)

-(3,-2)

---------

6     3

So the slope is 3/6=1/2.

A perpendicular line will have opposite reciprocal slope. So the perpendicular line will have a slope of -2.

We want this line segment to go through A(3,5).

We are going to use point-slope form:

[tex]y-5=-2(x-3)[/tex]

Add 5 on both sides:

[tex]y=-2(x-3)+5[/tex]

Distribute:

[tex]y=-2x+6+5[/tex]

Combine like terms:

[tex]y=-2x+11[/tex]

So the equation of the 3rd altitude line is y=-2x+11.

So the equations we want to find the intersection to is:

y=(3/2)x-(13/2)

y=1

y=-2x+11

I like the bottom two equations so I'm going to start there and then use my third line to check some of my work.

y=1

y=-2x+11

Replacing 2nd y with 1 since y=1:

1=-2x+11

Subtract 11 on both sides:

1-11=-2x

Simplify:

-10=-2x

Divide both sides by -2:

5=x

The point of intersection between y=1 and y=-2x+11 is (5,1).

Let's see if (5,1) is on that third line.

y=(3/2)x-(13/2)

1=(3/2)(5)-(13/2)

1=(15/2)-(13/2)

1=(2/2)

1=1

So (5,1) is the intersection of all three lines.

So (5,1) is the orthocenter.

Answer:

  -x + y > -4; x + y < 3 . . . . . last choice

Step-by-step explanation:

The boundary lines are both dashed, so there will be no "or equal to" as part of the inequality symbols (eliminates the second choice).

The downward sloping line has x- and y-intercepts that are both 3, so it will have the equation in intercept form ...

  x/3 + y/3 = 1

Multiplying by 3 gives x+y=3. The shading is below it, so the inequality with that line as the boundary is ...

  x + y < 3

This inequality is only part of the last choice.

__

The upward sloping line has x- and y- intercepts of 4 and -4, so its equation in intercept form is ...

  x/4 + y/-4 = 1

Multiplying by -4 gives -x+y=-4. The shading is above it, so the inequality with that boundary line is ...

  -x + y > -4

This inequality is included in the last choice.

The graph represents a system of inequalities that define a region satisfying all inequalities simultaneously. The relationship between variables on the axes gives the inequalities' data points, and quadratic equations' solutions provide boundaries if they're relevant and positive.

To identify the system of inequalities that the graph represents, you need to consider the relationships between the variables represented on the x-axis and the y-axis. This is an exercise in two-dimensional graphing. The values on the x-axis (independent variable) and the y-axis (dependent variable) provide the data points for the inequalities.

It's essential to note that in a system of inequalities, the solution is the region that satisfies all of the inequalities simultaneously. Depending on the inequality, the graphical representation could either be above or below a certain line, or within a particular region of the graph.

Quadratic equations sometimes provide a boundary for these inequalities, particularly when we are only interested in the real and positive root solutions. So, considering these aspects, it's possible to define a system of inequalities that match the graph provided.

https://brainly.com/question/2511777

#SPJ3

Answer: D. 0.322

Step-by-step explanation:

Given : Of 1232 people who came into a blood bank to give​ blood, 397 people had high blood pressure.

Then, the probability that the next person who comes in to give blood will have high blood pressure will be :_

[tex]\dfrac{\text{People had high blood pressure}}{\text{Total people}}\\\\=\dfrac{397}{1232}\\\\=0.32224025974\approx0.322[/tex]

Hence, the estimated probability that the next person who comes in to give blood will have high blood pressure = 0.322

The probability that the next person who comes in to give blood will also have high blood pressure is 0.322, calculated by dividing the number of people with high blood pressure (397) by the total number of people (1232).

The question is asking for the probability that the next person to come in and give blood will have high blood pressure based on previous data. We calculate probabilities by dividing the number of successful outcomes by the total number of outcomes. In this case, the successful outcome is a person having high blood pressure, and the total number of outcomes is the total number of people.

Simply divide the number of people with high blood pressure (397) by the total number of people (1232). Doing this gives: 397 / 1232 = approximately 0.322.

Therefore, the estimate of the probability that the next person who comes in to give blood will also have high blood pressure is 0.322.

https://brainly.com/question/22962752

#SPJ12

Answer:

The length of segment XY can be found by solving for a in

[tex]20^2-7.65^2=a^2[/tex]

The measure of the central angle [tex]\angle ZXW[/tex] is [tex]45\degree[/tex].

Step-by-step explanation:

If the regular octagon has a perimeter of 122.4cm, then each side is [tex]\frac{122.4}{8}=15.3cm[/tex]

The measure of each central angle is [tex]\frac{360\degree}{8}=45\degree[/tex]

The angle between the apothem and the radius is [tex]\frac{45}{2}=22.5\degree[/tex]

The segment XY=a is the height of the right isosceles triangle.

We can use the Pythagoras Theorem with right triangle XYZ to get:

[tex]a^2+7.65^2=20^2[/tex]

[tex]a^2=20^2-7.65^2[/tex]

Therefore, the correct options are:

The length of segment XY can be found by solving for a in

[tex]20^2-7.65^2=a^2[/tex]

The measure of the central angle [tex]\angle ZXW[/tex] is [tex]45\degree[/tex].

Answer:3rd and 4th anwser

Answer:

BD = 4.99

Step-by-step explanation:

You can simply use the trigonometric identity tangent to solve for length BD.

Tan = opposite/adjacent

In this case we have,

Tan 31 = 3/BD

BD = 3/Tan 31

BD = 4.99

Answer:

a)  N = 1.06S +2000

b)  the old salary is scaled by a factor of 1.06 and translated upward by 2000.

Step-by-step explanation:

a) a 6% raise means the new salary is 100% + 6% = 106% of the old one. A raise of an additional dollar amount simply adds to the scaled salary.

__

b) The translations are "math speak" for the English description of "increased by 6% and then raised by 2000". "Increased by 6%" means that .06 of the amount is added to the amount, effectively multiplying it by 1.06. "Raised by 2000" means 2000 is added.

Answer: Hypothesis testing

Step-by-step explanation:

In statistics , Hypothesis testing is a general procedure to check the results of a experiment or a survey to confirm that they have actual and valid  results.

Given claim : A recent study claimed that half of all college students "drink to get drunk" at least once in a while. By believing that the true proportion is much lower, the College Alcohol Study interviews an SRS of 14,941 college students about their drinking habits and finds that 7,352 of them occasionally "drink to get drunk".

Here the College Alcohol Study is just testing the results of the survey .

Hence, this is is s a type of Hypothesis testing.

Answer:

See explanation.

Step-by-step explanation:

Part C)

[tex]5+(-10)[/tex]

When adding a positive to a negative, the result will be the sign of the larger absolute value. In this case, 10 is greater than 5, so the result will be negative.

Adding a negative is also the same thing as subtracting a positive.

[tex]5+(-10)\\5-10\\-5[/tex]

For your second problem, 5 is larger than 3, so the result will be positive.

[tex]5+(-3)\\5-3\\2[/tex]

-----

When adding a positive to another positive, the result will be positive.

[tex]5+3\\8[/tex]

When adding a number to zero, the answer will always be the number.

[tex]5+0\\5[/tex]

Part D)

When multiplying a positive times a negative, the result will always be negative.

[tex]5*(-10)\\-50[/tex]

[tex]5*(-3)\\-15[/tex]

-----

When multiplying a positive times a positive, the result will always be positive.

[tex]5*10\\50[/tex]

When multiplying a positive or a negative times zero, the result will always be zero.

[tex]5*0\\0[/tex]

Answer:

C

Step-by-step explanation:

An angle whose vertex lies on a circle and whose sides are 2 chords of the circle is one half the measure of the intercepted arc.

arc CED is the intercepted arc, hence

arc CED = 2 × 99° = 198°

Answer:

C) 198

Step-by-step explanation:I took the test

Answer:

40oz glycol and water

10% is glycol

4oz is glycol

36oz is water

if glycol is to be added to make glycol 25% of all then

note: water does not change

100-25=75

water does not change so

36oz=75%

12=25%

there should be 12 oz of glycol total

4 now

12-4=8

8 oz should be added

sorry, I just wrote what I was thinking

answer is 8oz

Read more on Brainly.com - https://brainly.com/question/2526272#readmore

Step-by-step explanation: