28.5g of iron shot is added to a graduated cylinder containing 45.50 mL of water. The water level rises to 49.10mL mark, From this info, calculate the density of iron.​

Answer:

They aren't physical properties of water because it's the chemical formula of water, H2o, or hydrogen and oxygen.

Explanation:

Examples of the physical property of water are Boiling Point, Freezing Point, Surface Tension, Heat of Vaporization, and Vapor Pressure, Viscosity, Cohesion, it's Solid, Liquid and Gas state.

Plz rate me as brainliest

Answer:

Atomic Mass of Element = 59.57 amu

Given Data:

Element X Isotope 1 atomic weight = 59.015 amu  

Element X Isotope 2 atomic weight = 62.011 amu

The abundance of lighter isotope = 81.7%

Atomic Mass of Element X = ?

Solution:

81.7% is the abundance of element that is lighter so it is the of the isotope having weight 59.015 amu

Then the remaining abundance = 100 -81.7 = 18.3 %

18.3 % abundance of the isotope weight = 62.011 amu

Formula:

Mass of the element =  % of abundance (atomic mass of Isotope 1) + % of abundance (atomic mass of Isotope 2)

Put the values

Atomic mass of Element X = 81.7/100 (59.015) + 18.3 /100 (62.011)

Atomic mass of Element = 0.817 (59.015) + 0.183 (62.011)

Atomic mass of Element = 48.22 + 11.35

Atomic Mass of Element = 59.57 amu

Answer:

Water

Explanation:

A compound can be defined as the bonding of two or more atoms, where at least two are different types of atoms. That is, they are atoms from more than one element. Water fits this definition as it is the bonding between two hydrogen atoms and one oxygen atom, with chemical formula H2O. Iodine and gold are elements and therefore are only single atoms. Sand is classified as a mixture and therefore is not the correct option.

Answer:

C

Explanation:

A physical change is when the form of the matter is just altered. While a chemical change results from a chemical reaction. No reaction is happening during the mixing of the two colors [nothing is boiling, freezing, evaporating, melting ext.] , but after you mix them the end result does look different. That only because we changed the physical properties of it.

(B is not a physical change because the baking powder inside of the cake must under go a reaction that causes the cake to rise. )

Answer:

C. A blue liquid and a yellow liquid mix and make a green liquid.

Explanation:

A physical change is a change in which chemically a substance remains the same but a change in state of matter may occur. It is a reversible change i.e. the substance can be converted into the original state even after the change has occurred. As per option c even if a blue liquid has been mixed with a yellow liquid to produce a green liquid we can still separate both the liquids using a physical method of separation to get the original liquids back.

Other options are wrong because they are examples of chemical change in which the change is irreversible and we can never get the original substance back by any means because a reaction has changed the substance entirely.

Answer:

45.4249 L

Explanation:

E85 is the mixture of gasoline and ethano. It consist of 15 percent gasoline and 85 percent ethanol.

Given data:

volume = 12 gal

density = 0.785 g/ ml

volume in L = ?

Solution:

1 gal = 3.78541 L

12× 3.78541 = 45.4249 L

Answer:

I think it is b) NOT SURE

Explanation:

Answer: False, True, True, True, True

Explanation:

Sound can travel through a vacuum.

False. Sound requires a medium (solid, liquid, or gas) to travel through. It cannot travel through a vacuum because there are no particles in a vacuum to transmit the sound waves.

Sound travels in longitudinal waves.

True. Sound waves are indeed longitudinal waves, which means the particles in the medium vibrate parallel to the direction of the wave.

Sound is caused by vibration.

True. Sound is produced by the vibration of particles in a medium, which creates compressions and rarefactions that propagate as sound waves.

Sound travels most slowly through a gas.

True. Sound generally travels more slowly through gases compared to liquids and solids because the particles in gases are more spread out, leading to a lower transmission speed.

Sound speeds up when the temperature is increased.

True. In general, the speed of sound increases with an increase in temperature. This is because an increase in temperature typically leads to an increase in the speed of the particles in the medium, allowing sound waves to propagate more quickly.

So, the correct statements are 2, 3, 4, and 5.

Answer:

D and ionExplanation:

An ion is not considered a fundamental particle of an atom; rather, it is an atom or molecule with a net electrical charge. Electrons, protons, and neutrons are the basic atomic particles.

The particle within an atom that does not belong to the list is D an ion. Atoms are primarily composed of three basic particles: A a proton, B a neutron, and C an electron. An ion on the other hand, represents an atom or molecule with a net electrical charge due to the loss or gain of one or more electrons, which is not a fundamental particle of an atom.

https://brainly.com/question/2102349

#SPJ3

Answer:

Chemical

Explanation:

Chemical changes are when a substance combines with another in order to form a new substance. In this instance the baking powder is reacting which creates carbon dioxide bubbles.

The release of carbon dioxide that results in the rising of bread is an example of a chemical change.

There is always a specific chemical or physical shift that goes along with changes in energy. A natural environment undergoes a variety of changes, including water evaporation, condensation, rainfall, and more. All of these modifications imply a change in state. Some reactions result in the breakdown of existing bonds in the reactants and the formation of new bonds in the products.

Chemical changes occur when the molecular makeup is totally changed and a new product is created. New products are created via chemical modifications. Chemical alterations are both permanent and irreversible.

It demonstrates that modifying or tweaking the experimental modifications cannot undo a chemical change. During a chemical reaction, the substance's mass changes. The mass is either added or subtracted.

Therefore the release of carbon dioxide that results in the rising of bread is an example of a chemical change.

Read more about chemical change, here

https://brainly.com/question/23693316

#SPJ2

Answer:

There will be produced 66g of CO2 if 45g of glucose completely reacted with oxygen

Explanation:

Step 1 : Balance the formula

Oxidation of glucose can be shown in the following equation :

C6H12O6  + 6 O2  → 6 CO2 + 6H2O

This means that for 1 mole glucose that react there will react 6 moles of O2, to form 6 moles of CO2 and 6 moles of H2O

Step 2: Calculating moles

mole glucose = 45g / Molar mass glucose

   ⇒ Molar mass = 6*12 + 12*1 + 6*16 = 72 + 12 + 96 = 180g/mole

⇒ mole glucose = 45g / 180g/mole

⇒mole glucose = 0.25 mole

Since 1 mole of glucose is used to form 6 moles of CO2

0.25 mole of glucose is used to form 1.5 moles of CO2

Step 3 : Calculating mass of Carbon dioxide

Mass of CO2 = 1.5 moles of CO2 * 44 g/mole

mass of CO2 = 66g

There will be produced 66g of CO2 if 45g of glucose completely reacted with oxygen

If 45g of glucose reacts with oxygen, 66.015 grams of carbon dioxide would be produced. This calculation is based on converting the mass of glucose to moles, using the stoichiometry of the balanced chemical equation, and then calculating the mass of CO2 produced.

When glucose (which has the chemical formula C6H12O6) is consumed, it reacts with oxygen to produce carbon dioxide, water, and energy. The chemical equation for this reaction is C6H12O6 + 6 O2 → 6 CO2 + 6 H2O. Given that 45g of C6H12O6 completely reacts with oxygen, we need to calculate the mass of carbon dioxide produced from this reaction.

To do this, we first need to determine the molar mass of glucose, which is 180.16 g/mol. This means that 1 mole of glucose weighs 180.16 grams. We can then find out how many moles of glucose 45g represents by dividing 45g by 180.16 g/mol, which gives us 0.25 mol of glucose.

According to the chemical equation, 1 mole of glucose produces 6 moles of CO2. Therefore, 0.25 moles of glucose would produce 0.25 × 6 = 1.5 moles of CO2. The molar mass of CO2 is 44.01 g/mol, so the mass of CO2 produced by 0.25 moles of glucose is 1.5 moles × 44.01 g/mol, resulting in 66.015 grams of CO2. So, if 45g of C6H12O6 completely reacted with oxygen, 66.015 grams of CO2 would be produced.

Answer:

Explanation:

Kinetic energy is the energy due to changes in position of a body. It is always with regards to motion of a body.

Potential energy on the other hand is the energy at rest of a body.

To estimate kinetic energy, we use the formula:

      K.E =  [tex]\frac{1}{2}m v^{2}[/tex]

where m is the mass of the body and v is the velocity of the object.

mass is 5kg and velocity is 5ms⁻¹

      K.E =  [tex]\frac{1}{2}5 x  5^{2}[/tex]

      K.E = 62.5J

for the object at rest;

    potential energy is calculated:

    P.E = mgh

where m is the mass, g is the acceleration due to gravity and h is the height

m is 5kg, h is 2 and g is 9.8

    P.E = 5 x 9.8 x 2 = 98J

The moving object has kinetic energy with the object  at rest having potential energy.

The moving object has kinetic energy with the object  at rest having potential energy.

Answer:

option B= anion (-1)

Explanation:

The halogens are present in the P- block of periodic table. There are thirty five elements present in p-block. The halogens are present in group seventeen. Their are seven electrons are present in valance sheet. All halogens require one electron to complete the octet and form anion carry -1 charge.

Halogens include following elements:

Fluorine, chlorine, bromine, iodine and astatine.

The halogens mostly form single bond with the other elements by gaining one electron and -1 charge. These are most reactive non-metals.

Properties of some halogen elements:

Fluorine:

1. It is yellow in color.

2. It is flammable gas.

3. It is highly corrosive.

4. Fluorine has pungent smell.

5. It's reactions with all other elements are vigorous except neon, oxygen, krypton and helium.  

Chlorine:

1. It is greenish-yellow irritating gas.

2. Its melting point is 172.2 K.

3. Its boiling point is 238.6 K.

4. It is disinfectant and can kill the bacteria.

5. It is also used in manufacturing of paper, paints and textile industries.

Iodine:

1. It is present in solid form.

2. It is crystalline in nature.

3. It is very corrosive and has pungent odor.

4. It can not react with oxygen and nitrogen.

Answer:

¹⁴N isotope

Explanation:

7p⁺  are representing the number of protons in the nucleus

7n° are representing the number of neutrons in the nucleus

7e⁻ are representing the number of electrons

If we add the number of protons and the number of neutrons we get a mass number of 14 which is the atomic mass of the nitrogen-14 isotope.

Answer:

N¹⁴

Explanation:

Each element has its own properties, and those properties can be seen by their atomic number and proton number. However, there are types of atoms called isotopes, and these atoms have a different number of neutrons compared to its standard atom. For example, the standard atom of carbon is carbon-12, however, there are isotopes of carbon that have more neutrons, making them heavier. Examples of such isotopes are carbon-13 and carbon-14.

In this question, we are looking for an atom with has 7 protons and 7 electrons. Scanning the periodic table of elements, we can see that nitrogen is the only atom with 7 protons, hence in a neutral atom of nitrogen, there are 7 protons and 7 electrons. The atomic mass can be calculated by adding the number of protons and the number of neutrons together, so the atomic mass for this isotope is:

Protons + Neutrons = Atomic Mass

= 7 + 7

= 14

The isotope represented by 7p+ 7e-, 7n0 is nitrogen-14 (N¹⁴).

Answer:

Option C : Ag

Electronic configuration:

47Ag: 1s2 2s2 2p6 3s2 3p6 4s2 3d10 4p6 5s2 4d9

The d-block elements are present in the middle of periodic table between s and p-block elements. d-block elements are also called Transition elements. Their valance electrons are reside in the d orbitals. They have more electropositive character than p-block elements but less than s- block elements.

Final answer:

The d block element among the given choices is Ag (silver), which is part of the second transition series, making the correct answer C) Ag.

Explanation:

The element that is a d block element among the choices provided is Ag (silver). This is because d block elements comprise the groups 3 through 12 on the periodic table, which are also known as the transition metals.

According to the division of the d block elements, silver (Ag) falls into the second transition series. S (sulfur) and Ar (argon) are p block elements, while As (arsenic) is also a p block element. Therefore, the correct answer is C) Ag.

The total number of electrons that can occupy the d-sublevel is 10.

So, option third is correct one.

learn about subshell,

https://brainly.com/question/19221869

#SPJ2

Final answer:

The percentage of ethylene glycol in the solution is calculated to be 34.21% by mass, which is obtained by dividing the mass of ethylene glycol by the total mass of the solution and then multiplying by 100.

Explanation:

The percentage of ethylene glycol in the solution can be calculated using the mass percentage formula, which is the mass of ethylene glycol divided by the total mass of the solution, then multiplied by 100 to convert it into a percentage. In this case, we have 130 g of ethylene glycol and a total solution mass of 380 g. The calculation would be:

Percentage of ethylene glycol = (Ethylene glycol mass / Total solution mass) × 100

Percentage of ethylene glycol = (130 g / 380 g) × 100

Percentage of ethylene glycol = 0.3421 × 100

Percentage of ethylene glycol = 34.21%

Therefore, the solution contains 34.21% ethylene glycol by mass.

Answer:

K

Explanation:

The key aspect in this question is to look for Ionization Energy (EI), which describe the needed energy to take out an electron. Thefore, the potasiumm need lower energy . Another important thing is analyze how K will take nobel gas electron configuration when loss 1 electron, this It will be more stable

Answer:

Their similarity is that they have the same number of protons. Their difference is that they have different number of neutrons.

Explanation:

They are isotopes of the same element.

Answer:

A

Explanation:

You always want to make the number two digits, and then multiply by ten to however many zeroz

Answer:

5.6 x 10-5

Explanation:

Answer:

The sun will heat up and expand into a Red Giant star, then heat up to an extreme temperature, explode, and compact into an even hotter white dwarf star.

Explanation:

when our Sun runs out of hydrogen fuel, it will expand to become a red giant, puff off its outer layers, and then settle down as a compact white dwarf star, then slowly cooling down for trillions of years.

Answer:

White dwarf

Explanation:

Sun is a G-2 average mass star. It is 4.56 billion years old and would live for another 5 billion years. When the Sun would run out off fuel, its outer layers would expand and it will form a red giant star. The outer layers would eventually blow off into space and the remaining core would become a white dwarf. White dwarf is an electron degenerate star.

Answer:

14.14

If you round it I'm guessing it would be 14.

Good luck <3

Answer:

10√2

Explanation:

Answer:

B. mass, volume

Explanation:

Density refers to a physical property that is measured using a ratio of mass divided by volume so that two objects of the same size can still have very different density.

Answer: Option (B) is the correct answer.

Explanation:

Density of a substance is defined as mass divided by its volume.

Mathematically,         Density = [tex]\frac{mass}{volume}[/tex]

So, density is proportional to the mass of substance. Hence, an increase in mass will lead to increase in density of the substance also.

Whereas density is inversely proportional to volume of a substance. Hence, an increase in volume will lead to a decrease in density of the substance.

Therefore, we can conclude that density refers to a physical property that is measured using a ratio of mass divided by volume so that two objects of the same size can still have very different density.

Answer:

V = 1.2 × 10⁻⁶ m³

Explanation:

Volume is equal to length × width × height, since we are given these measurements in the question we can simply plug our numbers into the formula.

V = l × w × h

V = 1.64 x 10⁻² × 1.5 x 10⁻² × 4.8 x 10⁻³

V = 1.2 × 10⁻⁶ m³

To calculate the volume of a salt crystal, multiply its three dimensions: 1.64 × 10^-2 m, 1.5 × 10^-2 m, and 4.8 × 10^-3 m. The resulting volume is 1.18 × 10^-6 cubic meters. This method uses basic multiplication of the crystal's dimensions.

Volume Calculation of a Salt Crystal

To find the volume of a salt crystal, you need to multiply its three dimensions together. The dimensions provided are 1.64 × 10-2 m, 1.5 × 10-2 m, and 4.8 × 10-3 m.

Here's the volume calculation step by step:

Volume = 1.64 × 10-2 m × 1.5 × 10-2 m × 4.8 × 10-3 m = 1.18 × 10-6 m3

Therefore, the volume of the salt crystal is 1.18 × 10-6 cubic meters.

Answer:

At the same temperature of 0°C, the density (mass per volume) of ice is 0.9187 gram per cubic centimeter (g cm-3 or g/cm3) while that of liquid water is 0.9998 g cm-3 (Cohen et al. 2003). The lesser density means that ice contains lesser mass (quantity of matter) per unit of volume. It also means that the molecules of water are less compressed per unit volume of ice. Another way of saying it is that ice is less compact than liquid water having the same volume.

Answer:

Volume increase by 8.70% and volume of 500 mL of water when completely frozen is 543 mL

Explanation:

Answer:

Na

Explanation:

To find the limiting reactant we must first write the balanced chemical reaction. It must be correctly balanced so that we can find the proper mole ratios.

2 Na + H₂ → 2 NaH

After this we will convert our measurements to moles. For mass we do this by dividing by the molar mass.

6.75g ÷ 22.99 = 0.294mol Na

3.03g ÷ 2.02 = 1.50mol H₂

Now that we have the moles of each of the reactants, we can multiply them by their mole ratio with a reactant.

0.294mol Na × [tex]\frac{2 Na}{2 NaH}[/tex] = 0.294mol NaH

1.50mol H₂ × 2/1 = 3.00mol NaH

Na is our limiting reagent because it makes the smaller amount of moles.

Answer:

Atoms of different elements can combine with one another in simple whole number ratios

All the given statements are first proposed by John Dalton. But the one think that atoms are tiny indivisible particles had to be revised because of the discovery of subatomic particles electrons, protons and neutrons.

An atom is the basic unit of every substance in the universe. Atoms are made up of a nucleus and electrons. Nucleus is composed of positively charged protons and neutral particles neutrons.

There were many theories addressing the structure of atom in which the first significant one was Dalton's theory. According to this theory, Atoms are tiny indivisible particles.

The atoms of any one element are different from those of any other element. Compounds are made by combining atoms. Atoms of different elements can combine with one another in simple whole number ratios.

Later J.J thomson discovered electrons and Rutherford discovered protons and revolving nature of electrons around the nucleus. It was Niels Bohr who proposed the modern theory for atomic model and with the aid of this theory electronic properties of atoms were studied more.

Therefore, the indivisibility of atoms proposed by Dalton was wrong and thus option A is correct.

To find more about Dalton's theory, refer the link below:

https://brainly.com/question/11855975

#SPJ6

Answer: Decreased kinetic energy of the molecules

The first option that is given in the question is the correct option.

Explanation:

The molecules of a substance act differently at different temperatures but we know that its energy is dependent on the temperature at which it is present. The normal tendency of molecules is to vibrate on move around but, when it absorbs a certain amount of heat it gains more energy and tends to move around faster.

And just the other way round happens when heat is lost so we can say with a decrease in temperature the activity of molecules will also decrease and hence the kinetic energy will be decreased.

Answer:

Increase chemical energy of the molecules

Explanation:

Because once you change temperature it will have a chemistry reaction

Answer:

A thermometer is the appropiate tool to use.

Explanation:

! !

your answer is !

(A theromometer!)

Hope this helps

Answer:

In this case, ethanol's molecular mass is 46 g/mol. This means that in 1 mol of ethanol, there are 46 g, thus the term molecular mass and molar mass are often used interchangeably. The same is true of a mole. A mole of anything is 6.022 x 1023 of that item

Explanation:

Answer:

9 moles of particles are present in 1 mole of ethyl alcohol.

Explanation:

1. Ethanol is ethyl alcohol with the chemical formula [tex]C_2H_5OH[/tex]

2. Molecular formula is given by [tex]C_2 H_6 O[/tex]

3. [tex]1 C_2 H_6 O_1[/tex]  

4. 1 represents 1 mole of ethyl alcohol

5. Subscripts represents the number of moles of each element.

6. 2 moles of carbon atoms,  6 moles of Hydrogen atoms and 1 mole of oxygen atoms are present in 1 mole of ethyl alcohol.

7. So, totally 9 moles of particles are present in 1 mole of ethyl alcohol

8. 1 mole contains [tex]6.022\times10^{23}[/tex] particles or atoms or molecules or ions  

9. For example 1 mole of [tex]H_2 O[/tex] contains [tex]6.022 \times 10^{23} H_2O[/tex] molecules (contains 2 moles of H and 1 mole of O atoms )

10. 1 mole of Na contains [tex]6.022 \times 10^{23}[/tex] Na atoms  

11. 1 mole of [tex]CaCO_3[/tex] contains [tex]6.022\times 10^{23}CaCO_3[/tex]  molecules (1 mole of Ca, 1mole of C and 3 moles of O atoms )

12. 1 mole of [tex]Na^+[/tex] contains [tex]6.022 \times 10^{23} Na^+[/tex] ions

Answer:

75kg    

Explanation:

Given:

Force of gravity(F) = 1.85 x 10⁻⁹N

distance between Tim and John = 18m

Mass of Tim = ?

Unknown:

Mass of John = ?

Solution

Newton's law of universal gravitation states that every particle of matter in the universe attracts every other particle with a force that is directly proportional to the product of the masses of the particles and inversely proportional to the square of the distance between them.

i.e                            

                          F =G[tex]\frac{m_{1} m_{2}}{r^{2} }[/tex]

let

                     m₁ represent mass of Tim

                     m₂ mass of John

                    G is the universal gravitation constant = 6.67 x 10⁻¹¹Nm²kg⁻²

                    r is the distance seperating them

The unknown is m₂ and we should make it the subject of the expression:

               m₂  = F [tex]\frac{r^{2} }{m_{1} }[/tex] x [tex]\frac{1}{G}[/tex]

m₂ = [tex]\frac{1.85 x 10^{-9}  x  18^{2}  }{G x 120}[/tex]

m₂ = 75kg