Answer:
C
Explanation:
The upper and lower control arms are both attached to the steering knuckle by the upper and lower ball joints.
4. The friction point is the point
(a) where the vehicle starts to move.
(b) where you feel the engine turn off.
(c) when you suddenly release the clutch.
(d) none of the above
The friction point is where the vehicle starts to move, marking a crucial moment in manual transmission operation where the engine's power begins transferring to the wheels, overcoming static friction.
Explanation:The question asking about the friction point in the context of vehicle movement pertains to a scenario in driving where precise control of the vehicle's clutch is necessary. The friction point is correctly defined as (a) where the vehicle starts to move. This is because the friction point refers to the moment in the process of engaging the clutch where the engine's power begins to transfer to the wheels, overcoming static friction, and causing the vehicle to start moving. This is a crucial concept in understanding vehicle dynamics and manual transmission operation.
Understanding the friction point is integral to smooth driving and preventing the engine from stalling. It requires a delicate balance between the clutch and the accelerator, which, when mastered, allows for fluid movement from a stationary position. This concept is an essential part of learning to drive, especially for manual transmission vehicles, where the driver manually controls the clutch engagement.
What invention would you argue most impacted mechanical engineering
The steam engine significantly impacted mechanical engineering by revolutionizing transportation and production processes.
Explanation:The steam engine is arguably the most impactful invention on mechanical engineering due to its role in revolutionizing transportation and production processes. This invention by James Watt transformed the way goods were manufactured and significantly contributed to the Industrial Revolution.
True or False: In a technical drawing dimensions are optional. The manufacturer can decide on their own how big or small to make a design.
Answer:
False
Explanation:
3. When starting an automatic transmission
vehicle, the selector lever should be in
(a) LOW-L1 or L2, (c) PARK-P or
or 1 or 2
NEUTRAL-N
(b) DRIVE-D
(d) REVERSE-R
2. The component that connects to single point Lower Control Arms to prevent fore and aft motion is called what?
A. Sway Bar
B. Drag Link
C. Stabilizer Bar
D. Strut Rod
Explanation:
Sway bar:
It is otherwise known as anti-sway bar
It is a component of vehicle suspension
Safeguard your vehicle from rolling over.
Drag Link:
A drag link is a suspension linkage component Used in automotive technologyStabilizer Bar:
Once again this is a part of car suspension systemAvoid sharp turnD. Strut Rod:
It is mainly used for vehicle which is used in drifting show.
It would be unnecessary to install Strut Rod in normal vehicle.
Do organic farms usually require more or less labor than nonorganic farms?
Answer: Certified organic food. Certified organic products are generally more expensive than their conventional counterparts (for which prices have been declining) for a number of reasons: Prices of organic foods include not only the cost of the food production itself, but also a range of other factors that are not captured in the price of conventional food
Select the correct answer from each drop down menu.
What does Hooke’s Law explain ?
If the external force is larger than the
(1.)size
(2.)volume
(3.)elastic limit
of material, it may result in permanent deformation in the shape and size of the object. This characteristic is known as the
(4.)material behavior
(5.)elastic behavior
(6.)plastic behavior
of an object.
Answer:
The first drop down menu is elastic limit and the second one is plastic behavior.
Explanation:
If you embed a multimedia file, you reduce the bandwidth your Web site must manage.
A. True
B. False
What standard feature is on all circular saws?
1. Blade guard
2. Blade-height adjustment
3. Angle-of-cut adjustment
4. All of the above
What standard feature is on all circular saws?
4. All of the above
Who is responsible for conducting a hazard assessment?
Select the best option.
Employee
Employer
Discuss the representation of cultural diversity in video games today. Then, analyze the use of symbols in video game designs featuring diverse cultures.
Explanation:
Video games surely penetrate with existing culture and sometimes make us to change certain cultural aspects.
Normally, in video game, the creator of the game usually uses his / her own culture, names and characters and if it is successful, it is being shared with other countries too. Some video game become successful with the use of same culture and some other gets successful only after changing few cultural aspects according to the country's perspective. The player always gets adapted to the hairstyles, expression made by the character in the game which in turn change the cultural aspect when adapted by mass.
Video game uses symbols to make the game gets remembered easily, identify the character easily, etc. It can also enhance the depth of the scenes in the game.
CONTACT TEACHER
1. For what is the small mirror in the corner of the Radar sensor? in cars
Answer:
Explanation:
The blind-spot detection system uses radar sensors in the rear of the vehicle. These sensors are normally behind the rear bumper on each side. However, there are some instances where the sensor is in a different location, such as in the tail light or in the quarter panel behind the bumper cover.
A blind spot mirror is a helpful gadget fitted on the side mirrors of a car to show the driver parts of the road that are hidden from their vision. It essentially lets you keep track of the car lurking behind you, and you could also change lanes without compromising your safety.
Label the what are the parts of a bandsaw parts of a bandsaw
Answer:
check the diagram below
Explanation:
We are used to connect the external devices and power supply to a computer. My anagram is torps
Answer: Ports
Explanation:
Ports are the devices tat is used for connection of input devices and output devices wit computer.Te links created by ports between peripheral and computing system connects devices such as monitors, keyboard,modems , printer speaker s etc.
External devices get plugged into ports which are embedded on motherboard of the computing system to establish peripheral connection.
True or False: Galvanized steel pipe can withstand moderate freezing.
Answer:
True
Explanation:
Older galvanized steel pipes, which have a tendency to freeze, are a bit more forgiving and will likely not burst. They can withstand extreme cold and warm temperatures.
4. The outer end of a control arm is attached to the steering knuckle through a
A bushing
B. spring
ec ball joint
D. tie rod end
1. Which of the following is not found on a
vehicle's instrument panel?
(a) speedometer
(c) tachometer
(b) horn
(d) fuel gauge
Answer:
tachometer
Explanation:
in all the cars ever produced non has never had tachometer in the car instrument panel
Two vehicles arrive at an uncontrolled intersection from different streets at the same time 1.The driver on the right must yield to the vehicle on the left 2. The driver on the left must yield to the vehicle on the right 3. Both vehicles must stop 4. Neither vehicle must stop
Annie has collected several items from around her house. She is using these objects to investigate which objects are attracted to magnets and which ones are not. Which item should Annie expect to be attracted to her magnet?
A) ice cube
B) metal screw
C) leather glove
D) notebook paper
Turning a screw with a screwdriver pushes the screw into the wood. The force is __________ over many turns
Answer:
repeated?
Explanation:
not really sure what type of answer choices you have
The line touching the circle at a point ....................... is known as ........................... .
1. What is engineering? Based on your current perception, in a few sentences define the term “engineering.”
THANKSTHANSKTHANKSTHANSK
THANKSTHANSK
THANKSTHANSK
THANKSTHANSK
2. When entering a vehicle from the street side,
you should
(a) be ready to unlock the door.
(b) walk around the front of the vehicle
toward the back.
(c) get in quickly, then close and lock the door.
(d) all of the above
Answer:
D
Explanation:
we all do all of the above