86.1 g of nitrogen reacts with lithium, how many grams of lithium will react?

Answer:

Explanation:

Liquids have the medium energy level of the three state. They have enough energy for the molecules to break free from their solid lattice but not enough to separate from being in groups of molecules, they move around slowly and randomly in groups, with a moderate level of kinetic energy to power them.

The liquid state, as explained by the kinetic-molecular theory, is where particles can move around each other due to sufficient kinetic energy but remain in close contact because of intermolecular forces, resulting in a definite volume but no fixed shape.

According to the kinetic-molecular theory, the liquid state is characterized by particles that have enough energy to partially overcome their intermolecular interactions. Despite these interactions, particles within a liquid can move around each other, allowing the liquid to take the shape of its container. However, because particles in a liquid are still in close contact, they do not compress easily, giving liquids a definite volume.

In liquids, the kinetic energy of the particles allows them to slide past one another smoothly, changing neighbors due to their mobility, while the intermolecular forces maintain the overall cohesion. This energetic state is more dynamic compared to a solid but less energetic than a gas, where the particles are much further apart. The properties of liquids, therefore, are a balance between the kinetic energy of the particles and the intermolecular forces present.

Answer:

A thermometer has a glass tube sealed at both ends and is partly filled with a liquid like mercury or alcohol. As the temperature around the thermometer's bulb heats up, the liquid rises in the glass tube. ... When it is hot, the liquid inside the thermometer will expand and rise in the tube

Explanation:

pls mark as brainliest

Answer:

13mL

Explanation:

Step 1:

The balanced equation for the reaction. This is given below:

HNO3 + KOH —> KNO3 + H2O

From the balanced equation above, we obtained the following data:

Mole ratio of the acid (nA) = 1

Mole ratio of the base (nB) = 1

Step 2:

Data obtained from the question.

This includes the following:

Molarity of the acid (Ma) = 6M

Volume of the acid (Va) =?

Volume of the base (Vb) = 39mL

Molarity of the base (Mb) = 2M

Step 3:

Determination of the volume of the acid.

Using the equation:

MaVa/MbVb = nA/nB, the volume of the acid can be obtained as follow:

MaVa/MbVb = nA/nB

6 x Va / 2 x 39 = 1/1

Cross multiply to express in linear form

6 x Va = 2 x 39

Divide both side by 6

Va = (2 x 39)/6

Va = 13mL

Therefore, the volume of the acid (HNO3) needed for the reaction is 13mL

Answer:

[tex]M=741\times (0.5)^{\frac{t}{5730}}[/tex]

Explanation:

by using well known formula for disintegration

[tex]M=M_0\times (0.5)^{\frac{t}{T}}[/tex]

Final answer:

To calculate the original mass of carbon-14 in an artifact aged 10,670 years, given it now contains 8.4 × 10⁽⁻⁹⁾ grams of carbon-14, we use the half-life of carbon-14 (5,730 years) and the formula for exponential decay. The original mass is found to be 33.6 × 10⁽⁻⁹⁾ grams.

Explanation:

The subject of the question involves using exponential decay to calculate the original mass of carbon-14 in an archaeological artifact, taking into account the half-life of carbon-14, which is 5,730 years. Given that a sample now contains 8.4 × 10-9 grams of carbon-14 and its age is 10,670 years, we can calculate the original amount of carbon-14 it contained. To find the original mass of carbon-14, we can use the formula for exponential decay, M = M0(1/2)t/T, where M is the final mass, M0 is the original mass, t is the time elapsed, and T is the half-life of the substance.

Since 10,670 years is exactly two half-lives of carbon-14 (2 × 5,730), we can calculate that the artifact originally contained 8.4 × 10-9 grams × 22 = 33.6 × 10-9 grams of carbon-14.

Answer: Temperature is a measure of the kinetic energy of particles in a substance. As temperature increases, the atoms or molecules in a substance gain energy. As temperature decreases, the particles lose energy. A change in the energy of particles causes a change in their arrangement. A change in the arrangement of particles can lead to a physical change.

Explanation:

Answer:

yes

Explanation:

Answer:

Explanation:

THIS IS THE COMPLETE QUESTION

A)Identify TWO cultural traits shown in one or both of the photographs that are indicative of ethnicity.

B)Describe the process of relocation diffusion.

C)Describe ONE way in which relocation diffusion resulted in cultural landscapes shown in both photographs.

D)explain how the cultural landscapes shown in the photographs represent more than one culture.

EXPLANATION:

A)the two cultural traits shown in the photographs that are indicative of ethnicity are;

1) the torri

2)the logograms

B)The process of relocation diffusion provide an idea as a result of people moving from one place to another especially the adopters, they move from their base to new place.

C)Relocation diffusion resulted in the cultural landscapes that is shown in both photographs just gave the intance of migration process.

for instance, those that migrated to CALI and UK from china came along with their cultural trait too. As well as their custom

D)The cultural landscapes that is shown in the photographs gives the representation of multiple culture through displaying of

architectural styles from different culture.

Cultural landscapes display a linguistic features of more than one languages.

Relocation diffusion contributes to cultural landscapes by introducing new cultural elements through migration. Such landscapes often represent multiple cultures, as both local and migrated cultures can leave their imprint on the environment.

Relocation diffusion refers to the spread of a cultural trait by individuals who migrate and carry this trait with them to new locales. For example, when individuals who practice a particular religion migrate to a new location, they might build places of worship resembling those in their homeland, thus altering the cultural landscape of their new locale.

Cultural landscapes can often represent more than one culture because both the local and migrated cultures influence the landscapes. For example, in a cultural landscape where a McDonald's (representing American fast food culture) is situated next to a Buddhist temple (representing Asian religious culture), it is evident that more than one culture is influencing the setting.

https://brainly.com/question/16058567

#SPJ11

Answer:

Ethanol

Explanation:

2 C atoms and a single OH group.

Formula: C2H5OH

OPTION A. A) Both gases have the same average kinetic energy.

In the given gas mixture of Neon (Ne) and Xenon (Xe) at Standard Temperature and Pressure (STP), both gases only share the same average kinetic energy. However, they do not contribute equally to the mixture's density, they do not share the same molecular speed, and the total volume of the mixture is not 22.4L.

The TRUE statement among the options given is A) Both gases have the same average kinetic energy. The average kinetic energy of gas molecules is determined by temperature, not the type of gas, according to kinetic molecular theory. Therefore, since both gases are at the same temperature (Standard Temperature and Pressure, STP), they will have the same average kinetic energy.

B) is incorrect since each gas contributes to the mixture's density based on its own molar mass, and Xenon's molar mass is much greater than Neon's.

Option C is not correct because molecular speed is influenced by molar mass. Neon, having a smaller molar mass, will have a higher average speed than Xenon.

Statement D) is incorrect because according to Avogadro's law, one mole of any gas at STP occupies a volume of 22.4L, and we have a total of 16 moles of gas (8.0 mol of Ne and 8.0 mol of Xe) which will occupy a volume of 16 times 22.4L.

https://brainly.com/question/15013597

#SPJ3

1. For [tex]\([OH^-] = 10^{-12} \, M\)[/tex], the concentration of [tex]\([H_3O^+]\)[/tex] is [tex]\(10^{-2} \, M\)[/tex].

2. For [tex]\([OH^-] = 10^{-2} \, M\)[/tex], the concentration of [tex]\([H_3O^+]\)[/tex] is [tex]\(10^{-12} \, M\)[/tex].

Relationship Between [tex]\([H_3O^+]\) and \([OH^-]\)[/tex]:

The ion-product constant for water [tex](\(K_w\))[/tex] at 25 °C is [tex]\(1 \times 10^{-14} \, M^2\)[/tex].

[tex]\[ [H_3O^+] \times [OH^-] = K_w = 1 \times 10^{-14} \, M^2 \][/tex]

Case 1: [tex]\([OH^-] = 10^{-12} \, M\)[/tex]

[tex]\[ [H_3O^+] = \dfrac{K_w}{[OH^-]} = \dfrac{1 \times 10^{-14} \, M^2}{10^{-12} \, M} = 10^{-2} \, M \][/tex]

Case 2: [tex]\([OH^-] = 10^{-2} \, M\)[/tex]

[tex]\[ [H_3O^+] = \dfrac{K_w}{[OH^-]} = \dfrac{1 \times 10^{-14} \, M^2}{10^{-2} \, M} = 10^{-12} \, M \][/tex]

Answer:

See explanation below

Explanation:

To solve this problem, we need to use the Henderson - Hasselbach equation which is the following:

pH = pKa + log ([A⁻] / [HA])   (1)

Where:

[A⁻] = concentration of the acetate

[HA] = concentration of the acetic acid.

With the above expression, we can calculate the ratio of [A⁻] / [HA]. This concentration ratio will be used to calculate the individual concentrations. We know that a buffer is made as a mix of the acid and it's ion, in other words:

[HA] + [A⁻] = [Buffer]   (2)

So, with the concentration ratio, we can replace it here in (2) and then, we can calculate each concentration required.

First, let's use (1) to get the concentration ratio:

5 = 4.76 + log ([A⁻] / [HA])

5 - 4.76 = log ([A⁻] / [HA])

0.24 = log ([A⁻] / [HA])

[A⁻] / [HA] = 10⁰°²⁴

[A⁻] / [HA] = 1.7378

From this ratio, we can express either HA or A in function of the result. In this case, we will solve for A:

[A⁻] = 1.7378[HA]

With this expression, we can replace it in (2) to solve for [HA]:

[HA] + 1.7378[HA] = 0.2

2.7378[HA] = 0.2

Now all we have to do is replace this value in [A] to get the concentration:

[A⁻] = 1.7378 * 0.0731

Answer:

C₆H₆ + 3HNO₃ →  C₆H₃N₃O₆  +  3H₂O

Explanation:

The reaction is:

Benzene + Nitric acid → Water + ?

Let's determine the ? compound

Molar mass 213 g/mol

33.8g of C in 100 g of compound |

1.42 g of H in 100g of compound  | _  Percent composition

19.7 g of N in 100g of compound  |

45.1 g of O in 100g of compound  |

We propose these rule of three:

In 100 g of compound we have 33.8 g C, 1.42 g H, 19.7g N and 45.1g O

Therefore in 213g of compound we must have:

(213 .  33.8) / 100 = 72 g of C

(213 .  1.42) / 100 = 3 g of H

(213 .  19.7) / 100 = 42 g of N

(213 .  45.1) / 100 = 96 g of O

Now, we convert the mass to moles:

72 g of C . 1 mol / 12g = 6 C

3 g of H . 1 mol / 1g = 3 H

42 g of N . 1 mol / 14 g = 3 N

96 g of O . 1 mol / 16 g = 6 O

Molecular formula is C₆H₃N₃O₆. So the balanced reaction will be:

C₆H₆  +  3HNO₃ →  C₆H₃N₃O₆  +  3H₂O

Answer: The Answer is B. X: Sodium, Y: Potassium

Explanation: No Explanation I just Guessed. Hope This Help's Someone

Answer:

The answer is

X:Sodium Y:Potassium

Explanation:

I took the course and got it right

Answer:

Here After by Kate Brian

Explanation:

It is a really good story

The Goosebumps or RL.Stine book series is pretty interesting

Answer:

A

Explanation:

That is the only one that makes sense. Parasitism harms the the host while the parasite gains.

Answer: 17.71L

Explanation:

The volume can be calculated by using the ideal gas equation which is given as:

PV =nRT

Where P = Pressure, V= Volume, n= number of moles, R= gas constant and T = Temperature

From the above question :

P =5.4 ATM, V= ? n = 3.5 , R =0.082057 L atm /mol/K, T= 333K

PV = nRT

Make V subject of the formula we then have:

V= nRT/P

= 3.5 x 0.082507 L x 333 / 5.4

= 95.64 / 5.4 = 17.7L

Final answer:

To find the volume of H2 gas generated, first calculate the partial pressure of H2 using the ideal gas law equation PV = nRT. Then, convert moles of H2 to grams using the molar mass of H2. Finally, convert grams of H2 to liters using the molar volume of gas at STP.

Explanation:

When collecting a gas over water, the total pressure is equal to the sum of the partial pressure of the gas and the vapor pressure of water. To find the volume of H2 gas generated, we need to calculate the partial pressure of H2 gas. We can use the ideal gas law equation PV = nRT to solve for the number of moles of H2, and then use the molar mass of H2 to convert moles to grams. Finally, we can convert grams to liters using the molar volume of gas at STP. First, we need to calculate the partial pressure of H2 gas. The total pressure is given as 752 mm Hg, and the vapor pressure of water at 21.0°C is 18.65 mm Hg. So, the partial pressure of H2 gas is 752 mm Hg minus 18.65 mm Hg, which equals 733.35 mm Hg.

Next, we can use the ideal gas law equation PV = nRT to solve for the number of moles of H2 gas:

n = PV / RT = (733.35 mm Hg / 760 mm Hg/atm) * (1 atm / 760 mm Hg) * (3.566 g Zn / 65.38 g/mol) = 0.072 mol H2

Finally, we can convert moles to liters using the molar volume of gas at STP:

V = n * (22.4 L/mol) = 0.072 mol * (22.4 L/mol) = 1.6136 L

Answer:

The mass of the precipitate will give the amount/concentration of Bromide ion present in the reaction setup, thereby indirectly giving the amount/concentration of NaBr (aq) that we started with.

Explanation:

[tex]AgNO3(aq) + NaBr(aq) \rightarrow AgBr(s) + NaNO3(aq)[/tex]

From the mass of AgBr precipitate formed, we can obtain the mass of Br originally in the NaBr sample we started with, using the percentage by mass of Br in the AgBr precipitate multiplied by the mass of precipitate obtained.

This answer can then be used in a similar method to obtain the mass of NaBr we started with.

Mass of Br in AgBr = (Mass of precipitate obtained) × [(molar mass of Br)/(molar mass of AgBr)]

Mass of NaBr we started with = (Mass of Br in precipitate) × [(Molar Mass of NaBr)/(Molar mass of Br)]

The mass of the precipitate will give the amount/concentration of Bromide ion present in the reaction setup, thereby indirectly giving the amount/concentration of NaBr (aq) that we started with.

Hope this Helps!!!

The mass of the silver bromide (AgBr) precipitate in a reaction with silver nitrate (AgNO₃) and sodium bromide (NaBr) gives an indication of the reaction’s efficiency and how much of the reactants have reacted due to the principle of conservation of mass.

In the given chemical reaction, the mass of the precipitate, which is silver bromide (AgBr), gives an indication of how much of the reactants have reacted. This is due to the principle of conservation of mass which states that mass cannot be created or destroyed in a chemical reaction. Therefore, the total mass of reactants before the reaction will equal the total mass of the products after the reaction.

If you knew the initial amounts of silver nitrate (AgNO₃) and sodium bromide (NaBr), you could calculate the theoretical yield of silver bromide (AgBr) using stoichiometry. Then, by comparing this theoretical yield with the actual mass of the precipitate formed, you could calculate the percentage yield of the reaction, which is a common measure of reaction efficiency.

https://brainly.com/question/34137415

#SPJ6

Answer:

7.

Explanation:

A neutral solution has a pH=7.

A basic solution has a pH>7.

An acidic solution has a pH<7.

Answer:

7,7,7

Explanation:

Answer:

testing

Explanation:

some scientist somewhere made acid and probably forgot the recipe/ingredients so they kept making it and used plastic to see if it would melt it

92.8 % is the percent yield when 2.87 g of aluminum are reacted with excess copper (II) sulfate and 9.2 g of copper are produced.

Explanation:

Mass of aluminum = 2.87 grams

mass of copper produced = 9.2 grams ( actual yield)

the balanced chemical reaction is given as:

2 Al + 3 CuSO4 ⇒ ( AL2(SO4)3 +3 Cu.

from the reaction it is found that

2 moles of aluminum reacted to give 3 moles of copper

so converting them in to mass.

number of moles of copper in 2.8 grams = [tex]\frac{2.8}{63.4}[/tex]

number of moles = 0.104 moles of copper

atomic mass of aluminum = 26.98 grams/mole

atomic mass of copper = 63.54 grams/mole

From the given data

2.87 grams Al gives 9.2 grams of Cu.

2 moles of aluminum reacted to give 3 moles of copper

0.104 moles of aluminum will give

[tex]\frac{3}{2}[/tex] =[tex]\frac{x}{0.104}[/tex]

2x = 0.132

x = 0.156 moles of Cu will be formed.

Hence theoretical yield should be  = 0.156 x 63.54

                                                           = 9.91 grams

Percent yield = [tex]\frac{actual yield}{theoretical yield}[/tex] x 100

                      = [tex]\frac{9.2}{9.91}[/tex] x 100

  percent yield = 92.8 % is the yield percent.

Answer:

volume of solution L =0.54 L

Explanation:

Given data:

Molarity of NaCl solution = 3.70 M

Mass of NaCl = 118 g

Solution:

First of all we will calculate the number of moles.

Number of moles = mass/ molar mass

Number of moles = 118 g/ 58.5 g

Number of moles = 2 mol

Now we will calculate the volume from molarity formula:

Molarity = number of moles / volume of solution L

3.70 M = 2 mol / volume of solution L

volume of solution L = 2 mol / 3.70 M

volume of solution L =0.54 L

Answer:

The answer to your question is 58.7 g of Ca(OH)₂

Explanation:

Data

mass of Ca(OH)₂ = ?

mass of HNO₃ = 100 g

Process

1.- Write the balanced chemical reaction

              Ca(OH)₂ + 2HNO₃   ⇒   Ca(NO₃)₂  +  2H₂O

2.- Calculate the molar mass of the reactants

Ca(OH)₂  = 40 + 32 + 2 = 74 g

HNO₃ = 1 + 14 + 48 = 63 g

3.- Use proportions to calculate the mass of Ca(OH)₂

                  74 g of Ca(OH)₂ ----------------- 2(63) g of HNO₃

                    x                        ----------------- 100 g of HNO₃

                          x = (100 x 74) / 2(63)

                          x = 7400 / 126

                         x = 58.7 g

Explanation:

mass = Moles * molar mass

molar mass of BaSO4 = 112+32+64= 208

= 1.72*208 = 357.76

To determine the number of moles of O2 molecules in the given sample of dry air, we need to use the ideal gas law equation PV = nRT. We are given the pressure (P), volume (V), and temperature (T) of the sample, and we can calculate the number of moles (n) of oxygen molecules.

To determine the number of moles of O2 molecules in the given sample of dry air, we need to use the ideal gas law equation PV = nRT. We are given the pressure (P), volume (V), and temperature (T) of the sample, and we can calculate the number of moles (n) of oxygen molecules.

First, we need to calculate the partial pressure of oxygen in the air using the percent content in the mixture. Oxygen constitutes 20.94% of the molecules in dry air, so the partial pressure of oxygen (PO2) is calculated as PO2 = (Patm) X (percent content of oxygen). Given that the atmospheric pressure (Patm) is 0.0395 atm, the partial pressure of oxygen is PO2 = (0.0395 atm) X (0.2094).

Once we have the partial pressure of oxygen, we can use PV = nRT to calculate the number of moles of oxygen molecules (n). Rearranging the equation, n = PV / RT, where P is the partial pressure of oxygen, V is the volume of the sample, R is the ideal gas constant, and T is the temperature in Kelvin. Plugging in the values, we get n = (PO2)(V) / (RT).

https://brainly.com/question/30458409

#SPJ12

2 . The ratio of 1:2 in the mass of second element, oxygen in CO and CO2 verifies the law of proportion.

3. [tex]C_{15}[/tex][tex]H_{24}[/tex][tex]O_{5}[/tex]  is the molecular formula of the new malaria drug given.

Explanation:

Balanced chemical reaction:

C + O ⇒   C0

C + O2  ⇒  CO2

law of multiple formulation states that when two elements combine to form a compound the ratio of the mass of elements is a whole number.

Carbon reacts with oxygen to produce:

         Mass of carbon      mass of oxygen          ratio of O in CO2 to O in CO

CO =    12                                16                                      3:4

CO2 = 12                                 32                                     3:8

 CO    6 gm                              8                                     3:4

  CO2   6                                 16                                    3:8

The ratio of the mass of  the second element i.e oxygen is CO:CO2 is 1:2, hence it shows law of multiple proportions.      

3. given,

 (C5H8)nO5 = emperical formula

relative molecular mass = 284

molecular formula= ?  

The value of n will be calculated as:

(12x5)+ (1x8)n + (16x5) = 284

(60 +8)n  + 80 = 284

68n + 80 = 284

68n = 284 - 80

68n = 204

  n = 3

Multiplying the emperical formula by n

(C5H8)3O5

[tex]C_{15}[/tex][tex]H_{24}[/tex][tex]O_{5}[/tex] is the molecular formula of the drug.

The formation of different carbon oxide compounds with differing masses of oxygen that combine with a fixed mass of carbon demonstrates the law of multiple proportions with a small whole number ratio. To find the molecular formula of Alaxin, the relative molecular mass is divided by the mass of its empirical formula, yielding a molecular formula of C10H16O10.

The law of multiple proportions states that when two elements combine to form more than one compound, the masses of one element that combine with a fixed mass of the other are in the ratio of small whole numbers. To verify this with carbon and oxygen, we consider the two cases: carbon dioxide (CO2) and carbon monoxide (CO).

When 6.0g of carbon reacts with oxygen, we can get either 22.0g of carbon dioxide or 14.0g of carbon monoxide. The mass of oxygen that combines with the 6.0g of carbon can be calculated for each compound:

The ratio of the mass of oxygen in carbon dioxide to the mass of oxygen in carbon monoxide is 16.0g : 8.0g = 2:1, which is a small whole number ratio, thus verifying the law of multiple proportions.

To determine the molecular formula of Alaxin, given its relative molecular mass is 284:

Answer: its pressure

Explanation: just trust me