To accelerate a 12 kg bowling ball at 3 m/s², a force of 36 N is needed. The mass of a truck producing a force of 12,000 N while accelerating at 4 m/s² is 3,000 kg.
The question is asking us to calculate the force required to accelerate a 12 kg bowling ball and to find the mass of a truck given the force it produces and its acceleration. These problems involve using Newton's second law of motion, which states that the force on an object (F) is equal to the mass of the object (M) multiplied by its acceleration (A).
For the bowling ball:
Force (F) = Mass (M) times Acceleration (A)
F = 12 kg times 3 m/s²
F = 36 N (newtons)
For the truck:
Force (F) = Mass (M) times Acceleration (A)
12,000 N = M imes 4 m/s²
M = 12,000 N / 4 m/s²
M = 3,000 kg
How much force is needed to lift a 25-kg mass?
What happens if different lights are shined through a prism
Final answer:
Different lights are separated into their individual colors when shined through a prism due to the phenomenon of dispersion. The prism refracts the light, bending different colors by different amounts based on their wavelengths.
Explanation:
When different lights are shined through a prism, they are separated into their individual colors. This is because the prism refracts (bends) the light, but not all colors are bent by the same amount. The bending of the light depends on its wavelength, with different wavelengths being bent by different amounts. This phenomenon is called dispersion.
For example, when white light is shined through a prism, it is separated into a rainbow of colors, known as a continuous spectrum. The colors are lined up side by side, with violet light being bent the most and red light being bent the least.
Overall, the prism acts as a dispersing tool that separates the different colors of light based on their wavelengths, allowing us to see the individual colors that make up white light.
Which of the follow represent a chemical changes
Answer:
C) steel turning to rust in salt air
Explanation:
The missing options are:
A) ice melting to form liquid water
B) water boiling to form steam
C) steel turning to rust in salt air
D) sugar dissolving into hot coffee
In a chemical change the atoms of the reacting compounds are reordered forming new compounds. In a chemical change, new compounds appear, but in a physical change not.
Then, change of states like ice melting and water boiling are not chemical changes.
During steel rust, components of steel, like iron, are oxidized, that is, reacts with oxygen forming oxides.
The dissolution of sugar into hot coffee is a physical change in which sugar molecules get further apart in the coffee, but they don't change.
Beryllium has a nucleus composed of protons and neutrons. Given the data, how many neutrons are in a typical Beryllium nucleus?
A) 3
B) 4
C) 5
D) 9
In the early 19th century Christian Doppler, an Austrian physicist, proposed a theory regarding the properties of a moving source of sound. This is now known as Doppler’s law or the Doppler effect. What does this law state? A) The loudness of a moving source of sound is independent of the observer. B) The frequency of a moving source of sound is independent of the observer. C) The loudness of a moving source of sound is greater as it approaches an observer. D) The frequency of a moving source of sound is greater as it approaches an observer.
Answer: D) The frequency of a moving source of sound is greater as it approaches an observer.
Explanation:
Doppler effect occurs when there is relative motion between source of sound and observer. The apparent frequency observed by observed is different from the actual frequency of the sound emitted from the source.
When the source and observer move closer, the apparent frequency is greater and when moving away, it is less than the actual frequency. Thus, the correct option is D.
The loudness is dependent on the amplitude of the sound which remains same.
Answer:
D!
Explanation:
its on usatest prep!
The larger the push, the larger the change in velocity. This is an example of Newton's Second Law of Motion which states that the acceleration an object experiences is _____ .
Newton's Second Law of Motion which states that the acceleration an object experiences is directly proportional to the force applied to it
two important influences of dissolving a solute in a solution are temperature and ______.
what laws of motion are demonstrated by a hammer pounding a nail into a board?
The hammer pounding a nail demonstrates Newton's First Law, as the hammer's horizontal motion stops due to the opposing force of the nail and board, and Newton's Third Law, with the nail applying an equal and opposite force to the hammer.
The phenomenon of a hammer pounding a nail into a board can be analyzed using Newton's laws of motion. Specifically, two of these laws are demonstrated:
Newton's First Law (also known as the law of inertia). This law suggests that if an object is in motion, it will not change its velocity unless a force acts upon it. For example, a hammer in motion strikes a nail and is brought to rest because the nail and board apply a force opposing the hammer's motion.
Newton's Third Law states that for every action, there is an equal and opposite reaction. Therefore, as the hammer applies a force to drive the nail into the board, the nail applies an equal and opposite force to the hammer, causing it to stop.
When a hammer hits a nail, the horizontal momentum of the hammer is reduced to zero as the nail stops the hammer—illustrating Newton's First Law. Simultaneously, the force with which the hammer strikes the nail and the nail’s force on the hammer (which is responsible for stopping the hammer) is an example of Newton's Third Law in action.
A woman falls to the ground while wearing a parachute. The air resistance on the parachute is 500N. If the woman falls at a constant rate of 5 m/s, then the gravitational force on her is
Smoke alarms only emit alpha radiation. Why is it important that it does not emit other radiation?
Smoke alarms emit only alpha radiation, which has limited penetration power and is safe when contained, such as within the plastic casing of the detector. Inhaling alpha-emitting radioactive substances can be harmful, therefore strict containment like in smoke detectors is essential for safety.
It is important that smoke alarms only emit alpha radiation and not other types of radiation because alpha particles have limited penetration power, making them less harmful to humans when contained within a device. Alpha particles in smoke alarms are used to ionize the air and create a small electric current. In the event of a fire, smoke particles disrupt the flow of ions, which reduces the current and triggers the alarm. Many alpha-emitting substances are safe to handle because alpha particles can be blocked by simple barriers, like the plastic embedding in smoke detectors.
Inhaling or ingesting alpha-emitting radioactive dust, however, can be very dangerous as it exposes internal tissues to intense localized radiation, increasing the risk of cellular damage and cancer. For this reason, the containment of americium in smoke detectors ensuring that the radioactive material is not easily dispersed or inhaled is crucial to its safety in residential and commercial environments.
HELP ASAP PLEASEEEEEEEEEEEE
In a two planet system, does an increase in planet velocity result in a decreased period?
Answer:
d.
No, if velocity becomes too great, the planet can escape the Sun's gravitational pull.
Explanation:
It is correct on Edge 22
A very small red laser pointer is pointed on the wall across the room. When inspecting the reddish light on the wall, you notice that it is _______________ because it has been diffracted.
A) bent
B) brighter
C) spread out
D) bounced back
the answer is c) spread out
what properties of semiconductors make them useful in electronic devices
21 POINTS AND BRAINLIEST
I NEED HELP PLEASEEE
could you create a way to exert a continuous push on the ball? How would the ball respond to this continuous push?
IF there are 10.0 g of source and 8.0 g of oxygen, how many moles of sucrose are available for this reaction
How much power is required to lift a 25 kg box to the top of a 4 meter flight of stairs in 3.5 seconds?
Select ALL correct layers.
Identify the intrusions in the rock layers.
A) J
B) H
C) G
D) K
Newton's Three Laws - Complete the sentences.
Newton's FIRST Law of Motion
An object at ___ stays at ___ or an object that is ___ at a ___ in a straight ___ keeps moving at that ___ unless another ___ acts on it.
Newton's SECOND Law of Motion
The amount of ___ needed to make an object change its ___ depends on the ___ of the object and the ___ required.
Newton's THIRD Law of Motion
For every ____ (or force), there is a(n) ___ and ___ action (or force).
The FIRST law states that an object at rest stays at rest, or if it's moving it continues at a consistent speed and direction unless acted on by another force. The SECOND law implies that the force needed to change an object's motion depends on its mass and the required acceleration. The THIRD law states that every force (action) has an equal and opposite force (reaction).
Explanation:Newton's Laws of MotionNewton's FIRST Law of Motion
An object at rest stays at rest, or an object that is moving at a consistent speed in a straight line keeps moving at that speed unless another force acts on it.
Newton's SECOND Law of Motion
The amount of force needed to make an object change its motion depends on the mass of the object and the acceleration required.
Newton's THIRD Law of Motion
For every action (or force), there is a(n) equal and opposite reaction (or force).
Learn more about Newton's Laws of Motion here:https://brainly.com/question/38603068
#SPJ2
which of the following places would u expect to have the coldest climate?
a. a place that is very close to the poles
b. a place that is very close to the equator
c. a place that is near the equator
d. a place between the poles and equator
When are tides highest? a. during the moon’s first quarter phase b. when the sun, Earth, and the moon are nearly in a line c. during the moon’s third quarter phase d. when the moon is at a right angle to the sun
Answer:
b. when the sun, Earth, and the moon are nearly in a line
Explanation:
Due to gravitational pull of sun and moon, the level of water in seas and oceans rises above its normal level. This is known as tides. Highest tides occur when the sun, the moon and the Earth align in a straight line i.e. during New moon and Full moon. This is because in this alignment, there is maximum effect of gravity. Tide occurrence during this phase are also referred as spring tides.
Which of the following statements about asteroids is true? A. The asteroids in our solar system are spread out uniformly and are not grouped in any particular orbit. B. The majority of the asteroids in our solar system are found in the space between Mars and Jupiter. C. The majority of the asteroids in our solar system are found in the space between Earth and Mars. D. The majority of the asteroids in our solar system are found in the space between Jupiter and Saturn.
Answer:
Option (B)
Explanation:
Asteroids are the rocky materials that are present abundantly in an orbit between the planet Mars and Jupiter. This is known as the asteroid belt, which is comprised of millions of asteroids that move around the sun. They are of various sizes ranging from a few meters to about hundreds of kilometers, which can cause mass extinction if strikes on the surface of the earth. They move at a speed of about 80,000 km/hr and during this motion, frequent collision takes place and they are considered to be the remnant of the early solar system.
Thus, the correct answer is option (B).
What determines the atomic number of an element? Question 2 options: A.protons
B.neutrons
C.electrons
The speed of any sound wave as it travels through a medium is dependent mainly on the ?
HELP NEEDED FOR ASSIGNMENT PLZ HELP NOW Describe an environment in which the sound of a ringing cell phone could not be transmitted, and explain why the ringing wouldn't be heard. Justify your reasoning using complete sentences and key vocabulary.
Answer:
I did my best to research to help you
Explanation:
The answer would be in space because there is no matter and if there isn't matter the sound of a ringing cell phone could not be transmitted.
i need this as fast as possible
12) Which is MOST LIKELY a solid at room temperature?
A 140
B 78
C 186
D 124
Which statement is correct?
Material B is the least dense.
Material C is the most dense.
Material A is denser than Material D.
Material D is denser than Material A.
The correct statement is Material D is denser than Material A.
What is density of a material
Density of a material represents the amount of mass contained within a specific volume of that substance. It is calculated by dividing the material's mass by its volume.
This fundamental property, denoted as ρ, varies based on the composition and structure of the substance. For instance, metals generally possess higher densities compared to gases or liquids.
Hence we can say that Material D is denser than Material A.
question
The speed of light in four different materials is shown below:
Material Speed of light in thousand miles per second
A 140
B 78
C 186
D 124
Which statement is correct?
Material B is the least dense.
Material C is the most dense.
Material A is denser than Material D.
Material D is denser than Material A. ((my answer))
And this one as well
The small shock you feel when you rub your shoes on carpet and touch something is called by
A conduction
B insulator
C induction
D current
Please need help
I WILL GIVE BRANLIEST TO THE BEST ANSWER
1. What is weather?
2. What are 3 important things that our atmosphere does that allows for life on Earth?
3. The local news mentions that we will have a warm front coming through NH this week. What might we experience for weather before, during and after this front passes?
4. Is it possible that humans and dinosaurs have drank the same water? Formulate an argument to this question using your knowledge of the water cycle.