Answer:
636 balloons
Explanation:
If we assume that helium gas follows an ideal gas behaviour, we can use the ideal gas law to solve this problem as follows:
We consider two different states, the initial given by the conditions of the problem statement and the final, when the tank reaches atmospheric pressure and it's no longer able to fill balloons:[tex]P_{1}=160 atm\\V_{1}=12 L\\P_{2}=1 atm\\V_{2}= ?[/tex]To find out what would be this volume 2, we use the Boyle's Law: [tex]P_{1}V_{1}=P_{2}V_{2}\\V_{2}=\frac{P_{1}V_{1}}{P_{2}} \\V_{2}=\frac{160 atm \times 12L}{1 atm}\\V_{2}=1920 L[/tex]Now we find the available volume to fill the balloons by substracting both, volume 2 and volume 1: [tex]V_{b}=V_{2}-V_{1}=1920L-12L=1908 L[/tex]Finally, we determine the quantity of ballons by dividing that available volume between the volume of each ballon:[tex]B=\frac{1908L}{3L} =636 balloons[/tex]By applying Boyle's Law that states the pressure of a gas is inversely proportional to its volume, we find that the 12-L tank pressurized to 160 atm can fill a total of 640 3-L balloons to atmospheric pressure.
Explanation:This is a typical problem related to the ideal gas law and mainly involves the understanding of pressure-volume relationship in gases. Since the tank and the balloons are at different pressures, the volume the helium will occupy in the balloons at atmospheric pressure will be larger than the volume it occupies in the tank.
Based on this, if the helium tank is pressurized to 160 atm and the balloons are to be filled until the pressure in the tank is equivalent to atmospheric pressure (1 atm), the helium in the tank will expand 160 times its initial volume. Hence, the 12-L tank will fill 12 * 160 = 1920 L of balloon space. Given each balloon has a volume of 3 L, the number of balloons that can be filled is thus 1920 / 3 = 640 balloons.
Learn more about Boyle's Law here:https://brainly.com/question/21184611
#SPJ3
The Goodyear blimp we usually see hovering above our heads at a football game contains 5600 m3 of helium gas. If there are 1070 kg of gas at an absolute pressure of 1.10 105 Pa in the blimp, what is the temperature of the gas? The atomic mass of helium 4.00260 g/mol.
The questioned tackled determining the temperature of gas in a Goodyear blimp using the provided specifications and the ideal gas law: PV=nRT.
Explanation:
The question is about determining the temperature of the helium gas in a Goodyear blimp given certain parameters. Using the ideal gas law: PV=nRT we can calculate the temperature (T). In this scenario, the volume (V) is 5600 m3, the pressure (P) is 1.10x105 Pa and the number of moles (n) can be calculated by dividing the total mass of helium gas by its molar mass. By rearranging the gas law formula, the temperature could be calculated as T=(PV)/(nR), where R is the gas constant.
Following these steps, we can substitute the known values into the equation to solve for the temperature inside the Goodyear blimp. This problem involves concepts of physics, specifically gas laws, and would be covered typically in a college-level physics course.
Learn more about Gas Temperature Calculation here:https://brainly.com/question/29394951
#SPJ12
A buffer with a pH of contains M of sodium benzoate and M of benzoic acid. What is the concentration of in the solution after the addition of mol to a final volume of L? Assume that any contribution of to the volume is negligible.please Answer for H3O+. will rate
Answer:
benzoic acid(C7H6O2)--->
C7H5NaO2(sodium benzoate)+H30+
The answer is given per the balanced eqn
Hafnium, Hf, is also found in group 4B. Write the electron configuration for Hf. Express your answer in order of increasing orbital energy as a string without blank space between orbitals. For example, the electron configuration of Li could be entered as 1s^22s^1 or [He]2s^1.
The electron configuration for Hafnium (Hf) is [Xe]6s²4f¹⁴5d².
Explanation:The electron configuration for Hafnium (Hf) can be determined by looking at its position in the periodic table. Hafnium is in group 4B, which means it has 4 valence electrons. To write the electron configuration, we start with the noble gas that comes before Hafnium, which is Xenon (Xe).
The electron configuration for Hafnium, therefore, is [Xe]6s24f145d2.
Hafnium (Hf) has an electron configuration of 1s² 2s² 2p⁶ 3s² 3p⁶ 4s² 3d¹⁰ 4p⁶ 5s² 4d¹⁰ 5p⁶ 6s² 4f¹⁴ 5d², or [Xe] 4f¹⁴ 5d² 6s².
It's part of the transition metals in group 4B.
The element hafnium (Hf) is part of the group 4B elements in the periodic table, which includes transition metals like titanium (Ti) and zirconium (Zr). Hafnium has an atomic number of 72. To determine the electron configuration of hafnium in order of increasing orbital energy, we start by filling the orbitals based on the Aufbau principle:
1s² 2s² 2p⁶ 3s² 3p⁶ 4s² 3d¹⁰ 4p⁶ 5s² 4d¹⁰ 5p⁶ 6s² 4f¹⁴ 5d².
Alternatively, in shorthand notation, this can be written as [Xe] 4f¹⁴ 5d² 6s². This configuration follows the orderly filling of orbitals, ensuring that lower energy orbitals are filled before higher energy orbitals.
Cesium chloride has a lattice energy -657.0 kJ/mol and a heat of hydration of -639.0 kJ/mol. Determine how much heat is evolved or absorbed when 30.0 g of cesium chloride completely dissolves in water.
Answer:
Q = 3.21 kJ
Explanation:
First, with the heat of hydration and the lattice energy, we can actually calculate the difference between those two to get the heat evolved per mole. In this case it would be:
657 - 639 = 18 kJ/mol
Now, the expression to get the heat is:
Q = m*ΔE
We already have the energy, now we need to get the moles of the cesium chloride.
The molar mass of cesium chloride is 168.36 g/mol, so the moles:
mole = 30/168.36 = 0.1781 moles
Finally the heat:
Q = 0.1781 * 18
Q = 3.21 kJ
Bromine has two isotopes 79Br and 81Br, whose masses (78.9183 and 80.9163 amu) and abundances (50.69% and 49.31%, respectively) were determined in earlier experiments. Calculate the average atomic mass of bromine based on these experiments.
Answer:
Average atomic mass = 79.9034 amu
Explanation:
The formula for the calculation of the average atomic mass is:
[tex]Average\ atomic\ mass=(\frac {\%\ of\ the\ first\ isotope}{100}\times {Mass\ of\ the\ first\ isotope})+(\frac {\%\ of\ the\ second\ isotope}{100}\times {Mass\ of\ the\ second\ isotope})[/tex]
Given that:
For first isotope:
% = 50.69 %
Mass = 78.9183 amu
For second isotope:
% = 49.31 %
Mass = 80.9163 amu
Thus,
[tex]Average\ atomic\ mass=\frac{50.69}{100}\times {78.9183}+\frac{49.31}{100}\times {80.9163}\ amu[/tex]
[tex]Average\ atomic\ mass=40.0036+39.8998\ amu[/tex]
Average atomic mass = 79.9034 amu
Final answer:
The average atomic mass of bromine is calculated by taking the sum of the products of each isotope's mass and its abundance in decimal form. The result is an average atomic mass of 79.898 amu for bromine.
Explanation:
To calculate the average atomic mass of bromine based on the given experimental results, we need to consider the masses and relative abundances of its isotopes. By multiplying the mass of each isotope by its abundance (converted to a decimal form) and adding these weighted masses together, we can determine the average atomic mass.
Calculation:
Adding the weighted masses of both isotopes gives us: 39.994 amu + 39.904 amu = 79.898 amu. Thus, the average atomic mass of bromine based on these experiments is 79.898 amu.
Checking for Accuracy:
It is important to make sure that this number makes sense and correlates with the given abundances, ensuring that no mathematical errors have been made.
What is the molarity of a potassium triiodide solution, KI3(aq), if 30.00 mL of the solution is required to completely react with 25.00 mL of a 0.300 M thiosulfate solution, K2S2O3(aq)? The chemical equation for the reaction is 2 S2O32-(aq) + I3-(aq) → S4O62-(aq) + 3 I-(aq).
Answer:
Molarity of triiodide solution is 0.125M
Explanation:
According to balanced equation, 2 moles of [tex]S_{2}O_{3}^{2-}[/tex] completely react with 1 mol of [tex]I_{3}^{-}[/tex].
Moles of [tex]S_{2}O_{3}^{2-}[/tex] in 25.00 mL of 0.300 M of [tex]K_{2}S_{2}O_{3}[/tex] solution = [tex](0.300\times 0.02500)moles=0.0075moles[/tex]
So, 0.0075 moles of [tex]S_{2}O_{3}^{2-}[/tex] completely reacts with [tex](\frac{1}{2}\times 0.0075)moles[/tex] of [tex]I_{3}^{-}[/tex] or 0.00375 moles of [tex]I_{3}^{-}[/tex]
If molarity of [tex]KI_{3}[/tex] solution is S (M) then-
[tex]S\times 0.0300=0.00375[/tex]
or, [tex]S=0.125[/tex]
So, molarity of triiodide solution is 0.125M
To determine the molarity of the KI3 solution, calculate the moles of S2O32- that reacted and use the stoichiometry of the reaction to find the moles of I3-. Then, divide the moles of I3- by the volume of KI3 solution in liters to find the molarity.
Explanation:The question asks for the molarity of a potassium triiodide (KI3) solution. To find the molarity of the KI3(aq) solution, we need to use the provided stoichiometry of the reaction between thiosulfate (S2O32-) and triiodide (I3-).
The reaction is given as: 2 S2O32-(aq) + I3-(aq) → S4O62-(aq) + 3 I-(aq). Since 25.00 mL of a 0.300 M thiosulfate solution is required to completely react with the KI3 solution, we first calculate the moles of S2O32- reacted.
Moles of S2O32- = 0.025 L * 0.300 mol/L = 0.0075 moles.
According to the balanced equation, 1 mole of I3- reacts with 2 moles of S2O32-. Therefore, we have:
Moles of I3- = 0.0075 moles S2O32- / 2 = 0.00375 moles.
Because 30.00 mL (or 0.03000 L) of KI3 solution contains 0.00375 moles I3-, the molarity of KI3 is calculated by:
Molarity of KI3 = 0.00375 moles / 0.03000 L = 0.125 M.
Consider two solutions separated by a semi permeable membrane. The membrane allows the passage of small molecules and ions, but not large molecules like polysaccharides are proteins. Solution A contains a 10% solution composed of glucose and the protein albumin dissolved in water. Solution B contains a 5% solution of NaCl in water. Indicate whether each substance in the system would flow into Solution A, Solution B, or neither.
a. Water:
b. NaCl:
c. Albumin:
d. Glucose:
i would saythat the answer would be D
A 1.0 M solution of hydrochloric acid is mixed with an equal volume of sodium hydroxide solution. The resulting solution turns pH paper blue, meaning the solution is basic. Which of the following concentrations would be consistent with the experimental results for sodium hydroxide?
A. 1.0 M
B. 2.0 M
C. 0.5 M
D. 0.25 M
Answer:B since it have to be in excess inorder to result into basic salt result to blue colour
Organic compounds are distinguished by molecules that contain ________ bonded to other elements.
Consider the reaction: H2(g) + I2(g)->2HI(g)
A reaction mixture in a 3.67-L flask at a certain temperature initially contains 0.763 g H2 and 96.9 g I2. At equilibrium, the flask contains 90.4 g HI. Calculate the equilibrium constant (Kc) for the reaction at this temperature.
To calculate the equilibrium constant (Kc) for the reaction H2(g) + I2(g) \ightarrow 2HI(g), the moles of each reactant and product at equilibrium were calculated and then converted to concentrations. Using the concentrations, the Kc was determined to be approximately 610.97.
The reaction in question is H2(g) + I2(g) \ightarrow 2HI(g). To calculate the equilibrium constant (Kc), we need to determine the moles of HI, H2, and I2 at equilibrium. The molecular weights of H2, I2, and HI are approximately 2 g/mol, 254 g/mol, and 128 g/mol, respectively.
Initial moles of H2 = 0.763 g / 2 g/mol = 0.3815 mol
Initial moles of I2 = 96.9 g / 254 g/mol = 0.3815 mol
At equilibrium, there are 90.4 g of HI:
Equilibrium moles of HI = 90.4 g / 128 g/mol = 0.70625 mol
Since the reaction produces 2 moles of HI for every 1 mole of H2 and I2 that react, 0.70625 mol of HI would require half that amount of H2 and I2 to react:
Moles of H2 and I2 reacted = 0.70625 mol HI / 2 = 0.353125 mol
Moles of H2 and I2 at equilibrium = initial moles - moles reacted
Equilibrium moles of H2 = 0.3815 mol - 0.353125 mol = 0.028375 mol
Equilibrium moles of I2 = 0.3815 mol - 0.353125 mol = 0.028375 mol
We then convert these moles to concentrations by dividing by the volume of the flask:
[H2] = 0.028375 mol / 3.67 L \hickapprox 0.007732 M
[I2] = 0.028375 mol / 3.67 L \hickapprox 0.007732 M
[HI] = 0.70625 mol / 3.67 L \ hickapprox 0.192398 M
Now, we can calculate the equilibrium constant Kc
Kc = [HI]² / ([H2][I2]) = (0.192398 M)² / (0.007732 M × 0.007732 M) \hickapprox 610.97
In the reaction between CO and Fe3O4, the theoretical yield in an experiment is calculated to be 47.2 gFe. When a careless chemistry student carries out the experiment, the actual yield is 42.9 Fe. Calculatethe percentage yield.
A) 88.5%
B) 70.2%
C) 89.9%
D) 74.3%
E) 90.9%
Answer:
The percentage yield is 90.9 % (option e)
Explanation:
A simple rule of three to explain this.
If the theoretical yield of the reaction is 47.2 g Fe, we assume it as 100%, then what percentage of yield means 42.9 g Fe
47.2 g Fe _____ 100 %
42.9 g Fe ______ ( 42.9 . 100)/ 47.2 = 90.88%
Substituting the given values, the percentage yield is approximately E) 90.9%.
To find the percentage yield, we need to use the formula:
Percentage Yield = (Actual Yield / Theoretical Yield) × 100%
Given the actual yield as 42.9 g Fe and the theoretical yield as 47.2 g Fe, we can substitute these values into the formula:
Calculating -
[tex]\text{Percentage Yield} &= \left( \frac{\text{Actual Yield}}{\text{Theoretical Yield}} \right) \times 100\% \\\\\text{Percentage Yield} &= \left( \frac{42.9 \, \text{g}}{47.2 \, \text{g}} \right) \times 100\% \\\\\text{Percentage Yield} &= \left( \frac{42.9}{47.2} \right) \times 100\% \\\\\text{Percentage Yield} &\approx 0.9091 \times 100\% \\\\\text{Percentage Yield} &\approx 90.91\%[/tex]
Therefore, the percentage yield of the reaction is E) 90.9%.
A moving company is called into a building and asked to relocate 520 bricks to a location 15 meters above the ground. If each brick is 4 kilograms, what amount of work will be needed to accomplish the task?A. 305,760 JB. 229,320 JC. 203,840 JD. 588,000 J
Answer: A. 305,760 J
Explanation:
Work is defined as a force causing the movement or displacement of an object.
work=[tex]mass\times acceleration\times height[/tex]
Given: m= mass = 4 kg
g= acceleration due to gravity = [tex]9.80m/s^2[/tex]
h = height = 15m
Putting in the values we get,
work=[tex]4kg\times 9.80m/s^2\times 15m=588J[/tex]
[tex]1kgm^2s^{-2}=1Joule(J)[/tex]
Now 520 bricks are to be relocated, thus work done = [tex]520\times 588J=305760J[/tex]
Thus amount of work will be needed to accomplish the task is 305760 J.
Which elements can form diatomic molecules joined by a single covalent bond?
Answer:
Hydrogen and halogens.
Explanation:
There are seven types diatomic molecules are present in natural state: Hydrogen, chlorine, fluorine, nitrogen, bromine, iodine, and oxygen.
Hydrogen is the first element which have one electron and needs only one electron to fill its valence shell and form 2 hydrogen single bond to form H2.
The halogens, chlorine, fluorine, bromine, and iodine they all contain seven valence electrons. They all need one more electron so, they are sharing their one electron to fill its valence shell, and get Cl2, F2, Br2 and I2 (all single bonds)
Oxygen contains six valence electrons, each oxygen molecule needs 2 more electrons, and they contain 2 unpaired electrons. So, they share both electrons and form double bond.
Nitrogen contains five valence electrons. Each nitrogen atom required 3 more electrons and contains 3 unpaired electrons. The 2 atoms shares all 3 with each other molecule and this form a triple bond.
So, only Hydrogen and halogens form diatomic molecules with the help of single bond
Answer:
Halogen elements and H, O, N.
Explanation:
All halogen elements can form covalent bonds with each other to form a diatomic molecule. You can also add nonmetals, H, O and N.
All halogens have a configuration that differs from that of noble gases in an electron, so these elements tend to form negative species (anions) or form simple covalent bonds.
The Halogen are Cl, F, Br, I, As.
As atoms gain energy, they move faster and slide past one another more easily. Atoms at the surface of the substance overcome attractions to nearby atoms and break free of the surface. Which change of state is taking place?
- liquid to gas
- gas to liquid
- liquid to solid
- solid to liquid
Answer:
Liquid to gas
Explanation:
There are three states of matter, the solid, liquid and gaseous states. These states can be compared in a number of ways. These comparisms would tell us that the molecules of gases have the highest mobility.
The freedom possessed by these molecules are as a result of there inherent kinetic energy. While we have the highest confinement for solids, molecules of solids still have a level of freedom and hence although confined can move in some directions but are not entirely free from the total confinement of intermolecular forces like solids.
Hence,this total freedom is a character of gaseous molecules. As we were made to know in the question that they already had exhibited degree of movement to an extent,the total breakaway is to the gaseous state.
Thus,the phase transition is from liquid to gaseous state.
Vaporization (evaporation) is the transition from liquid to gas as atoms gain energy, break free of surface attractions, and move freely.
Vaporization (evaporation) is the change of state taking place when atoms at the surface of a substance absorb energy, overcome attractions to nearby atoms, and break free of the surface, transitioning from liquid to gas. This process involves the absorption of energy, which allows particles to move freely and transition into the gas phase.
Use the information in the table to identify the metal with a volume of 1.38 cm3.
Answer:
The metal with a volume of [tex]1.38 cm^3 [/tex] is zinc.
Explanation:
Density is defined as mass of the substance present in the unit volume of the substance.
[tex]Density=\frac{mass}{Volume}[/tex]
For aluminum:
Mass of aluminium metal , M = 4.60 g
Volume of the aluminium metal = V
Density of the aluminium metal = d = [tex]2.70 g/cm^3[/tex]
[tex]V=\frac{M}{d}=\frac{4.60 g}{2.70 g/cm^3}=1.70 cm^3[/tex]
For Zinc :
Mass of zinc metal , M = 9.81 g
Volume of the zinc metal = V
Density of the zinc metal = d = [tex]7.13 g/cm^3[/tex]
[tex]V=\frac{M}{d}=\frac{9.81 g}{7.13 g/cm^3}=1.38 cm^3[/tex]
For chromium :
Mass of chromium metal , M= 6.24 g
Volume of the chromium metal = V
Density of the chromium metal = d = [tex]7.18 g/cm^3[/tex]
[tex]V=\frac{M}{d}=\frac{6.24 g}{7.18 g/cm^3}=0.87 cm^3[/tex]
For nickel :
Mass of nickel metal , M= 3.17 g
Volume of the nickel metal = V
Density of the nickel metal = d = [tex]8.90 g/cm^3[/tex]
[tex]V=\frac{M}{d}=\frac{3.17 g}{8.90 g/cm^3}=0.36 cm^3[/tex]
The metal with a volume of [tex]1.38 cm^3 [/tex] is zinc.
Answer:
B - zinc
Explanation:
Hope this helps! ✌
Which one of the following statements is not true?
a. Basalt magmas, in general, have higher temperatures than rhyolite magmas.
b. When magma reaches the surface, its dissolved gas content increases.
c. Melting temperatures of silicate rocks are lowered by small amounts of water.
d. Melting temperatures of silicate rocks increase with increased pressure.
Answer:
When magma reaches the surface, its dissolved gas content increases is true
Explanation:
The volcanic eruptions happen because of magma that is expelled on the earth’s surface. At the earth’s depth, all magma have gas dissolved in liquid. When the pressure has decreased the magma rises towards the earth’s surface creating a separate vapour phase.
As pressure reduces the volume of gas will expands and giving magma its 'explosive character'. Thus, as magma reaches the surface the dissolved gas content decreases and magma comes out of earth’s surface.
The untrue statement is b, as the dissolved gas content in magma decreases as it reaches the surface due to reduced pressure. Basalt magma has higher temperatures than rhyolite magma. Water reduces the melting temperature of silicate rocks, and increased pressure raises it.
Explanation:The subject here pertains to volcanic activity and magma characteristics. The statement that is not true is: b. When magma reaches the surface, its dissolved gas content increases. In fact, as magma rises to the surface, the pressure decreases which allows the dissolved gases to escape, thus its dissolved gas content actually decreases. Statements a, c and d are true - Basalt magmas do generally have higher temperatures than rhyolite magmas. Additionally, the presence of water does indeed lower the melting temperature of silicate rocks, and increased pressure results in a higher melting temperature for these rocks.
Learn more about magma here:https://brainly.com/question/16940653
#SPJ3
________ is an indication of how near the air is to saturation rather than the actual quantity of water vapor in the air.
Answer: Relative humidity
Explanation:
Relative humidity (RH) is the ratio of the partial pressure of water vapor to the equilibrium vapor pressure of water at a given temperature. Relative humidity depends on temperature and the pressure of the system of interest. The same amount of water vapor has higher relative humidity in cool air than in warm air. A related parameter to that regard is that of dew point.
The following ions contain the same number of electrons. Rank them in order of decreasing ionic radii.?A. Na+B. Mg 2+C. Al 3+D. O 2-E. N 3-F. F -
Answer:
N3- > O2- > F- > Na+ > Mg2+ > Al3+
Explanation:
The ionic radio can simply be defined as the distance from the center of the nucleus to the electron in the outermost shell.
It should be noticed that all these ions belong to elements in group 3 of the periodic table.
It must be noted that anions I.e negative ions are generally bigger than anions.
Hence, it is expected that the negative ions are bigger. The arrangement goes thus:
N3- > O2- > F- > Na+ > Mg2+ > Al3+
The ions are ranked according to the number of protons in their nucleus, from least to most, which corresponds to the decreasing ionic radii. Therefore, the order of decreasing ionic radii is: N 3-, O 2-, F -, Na+, Mg 2+, Al 3+.
Explanation:The ions Na+, Mg 2+, Al 3+, O 2-, N 3- and F - all contain the same number of electrons so they are considered isoelectronic. The size of isoelectronic species depends on their nuclear charges, that is, the number of protons in their nucleus. An ion with more protons will have a stronger nuclear charge which attracts the negatively charged electrons more, causing the ion to be smaller.
So, when you put the ions in order of decreasing ionic radii, the ion with the most protons will be the smallest. Therefore, the order of decreasing ionic radii will be: N 3- < O 2- < F - < Na+ < Mg 2+ < Al 3+. This indicates that N 3- has the largest ionic radius while Al 3+ has the smallest ionic radius among these ions.
Learn more about Ionic Radius here:https://brainly.com/question/33300977
#SPJ11
An electrochemical cell is constructed using two half-cells: Al(s) in Al(NO2)3(aq) and Cu(s) in Cu(NO3)2(aq). The two half cells are connected by a KNO3 salt bridge and two copper wires from the electrodes to a voltmeter. Based on their respective standard reduction potentials, which half-cell is the cathode?
Answer:
Cu(s) in Cu(NO₃)₂(aq)
Explanation:
The standard reduction potential (E°) is the energy necessary to reduce the atom in a redox reaction. When an atom reduces it gains electrons from other than oxides. As higher is E°, easily it will reduce. The substance that reduces is at the cathode of a cell, where the electrons go to, and the other that oxides are at the anode of the cell.
The standard reduction potentials from Al(s) and Cu(s) are, respectively, -1.66V and +0.15V, so the half-cell of Cu(s) in Cu(NO₃)₂(aq) is the cathode.
A gas mixture used for anesthesia contains 2.83 mol oxygen (O2), and 8.41 mol of nitrous oxide (N2O). The total pressure of the mixture is 192 kPa. What is the partial pressure of N2O? Report your answer with three significant figures.
Answer:
The partial pressure of N2O is 143.6 kPa
Explanation:
Step 1: Data given
Moles O2 = 2.83 mol
Moles N2O = 8.41 mol
Total pressure = 192 kPa
Step 2: Calculate total number of moles
Total numberof moles = moles O2 + molesN2O = 2.83 + 8.41 = 11.24 mol
Step 3: Calculate mole fraction of N2O
Mole fraction N2O = mole N2O / Total moles
Mole fraction N2O = 8.41 / 11.24 = 0.748
Step 4: Calculate partial pressure of N2O
pN2O = 0.748 * 192 kPa
pN2O = 143.6 kPa
The partial pressure of N2O is 143.6 kPa
Answer: 144 kPa
Explanation:
To determine the partial pressure of N2O, first determine the mole fraction of N2O in the mixture, then multiply the mole fraction of N2O by the total pressure.
XN2O = nN2O/ ntotal = 8.41 mol / 2.83 mol + 8.41 mol = 0.7482
PN2O=XN2O×Ptotal = 0.7482 × 192 kPa = 143.7 kPa
Rounding the answer to three significant figures, the partial pressure of N2O is 144kPa.
Isopropyl alcohol is mixed with water to produce a 40.0 % (v/v) alcohol solution. How many milliliters of each component are present in 675 mL of this solution? Assume that volumes are additive.
Answer : The volume of water and alcohol present in 675 mL of this solution are 405 mL and 270 mL respectively.
Explanation :
As we are given that 40.0 % (v/v) alcohol solution. That means, 40.0 mL of alcohol present 100 mL of solution.
Now we have to calculable the volume of alcohol in 675 mL solution.
As, 100 mL of solution contains 40.0 mL of alcohol
So, 675 mL of solution contains [tex]\frac{675}{100}\times 40.0=270mL[/tex] of alcohol
Thus, the volume of alcohol = 270 mL
Now we have to calculate the volume of water.
Volume of water = Volume of solution - Volume of alcohol
Volume of water = 675 mL - 270 mL
Volume of water = 405 mL
Thus, the volume of water = 405 mL
Hence, the volume of water and alcohol present in 675 mL of this solution are 405 mL and 270 mL respectively.
What representative units define molecular compounds and ionic compounds?
Answer:
The molecular formula of the compounds indicates the amount of atoms that the substance contains. For example, water whose formula is H2O contains 2 atoms of hydrogen and 1 of oxygen. The representative unit of a molecular compound is a molecule while ions are represented by a formula unit.
Mole can be a unit 6.02 × 10²³. The units may be electrons, atoms, ions, or molecules, depending on the nature of the substance
Explanation:
The molecular formula of the compounds indicates the amount of atoms that the substance contains. For example, water whose formula is [tex]H2O[/tex] contains 2 atoms of hydrogen and 1 of oxygen. The representative unit of a molecular compound is a molecule while ions are represented by a formula unit.
Mole can be a unit 6.02 × 10²³. The units may be electrons, atoms, ions, or molecules, depending on the nature of the substance.
Therefore, water whose formula is [tex]H2O[/tex] contains 2 atoms of hydrogen and 1 of oxygen. The representative unit of a molecular compound is a molecule while ions are represented by a formula unit.
Learn more about water on:
https://brainly.com/question/28465561
#SPJ6
The mass of solute per 100 mL of solution is abbreviated as (m/v). Mass is not technically the same thing as weight, but the abbreviation (w/v) is also common. How many grams of sucrose are needed to make 765 mL of a 31.0 % (w/v) sucrose solution?
Answer:
There are needed 237.15 g of sucrose.
Explanation:
The 31.0 % (w/v) of the sucrose solution means that in 100 ml of solution, you have 31 g of solute, in this case sucrose.
So you want to make a solution with 765 mL.
Let's think the rule of three:
100 mL solution__contain __31 g sucrose
765 mL solution _________ (765 . 31 ) /100 = 237.15 g
The heat of vaporization of water at 100°c is 40.66 kj/mol. Calculate the quantity of heat that is absorbed/released when 9.00 g of steam condenses to liquid water at 100°c.
When 9.00g of steam condenses to liquid water at 100°C, 20.3 kJ of heat is released. This is calculated by converting the mass of water to moles, then multiplying by the heat of vaporization.
Explanation:The heat absorbed or released during the condensation of steam to liquid water is calculated by using the heat of vaporization (40.66 kJ/mol) and the moles of water. The mass of water given is 9.00g, which is converted to moles by dividing by the molar mass of water (18.02g/mol), resulting in 0.499 mol of water. The heat absorbed/released (Q) is calculated by multiplying the number of moles and the heat of vaporization. So, Q = 0.499 mol * 40.66 kJ/mol = 20.3 kJ (3 sig figs). So when 9.00g of steam condenses to liquid water at 100°C, 20.3 kJ of heat is released.
Learn more about Heat of Vaporization here:
https://brainly.com/question/33393699
#SPJ12
An ideal diatomic gas starting at room temperature T1 = 300 K and atmospheric pressure p1 = 1.0 atm is compressed adiabatically to 1/10 of its original volume. What is the final temperature of the gas?
Answer:
The final temperature of the given ideal diatomic gas: T₂ = 753.6 K
Explanation:
Given: Atmospheric pressure: P = 1.0 atm
Initial Volume: V₁ , Final Volume: V₂ = V₁ (1/10)
⇒ V₁ / V₂ = 10
Initial Temperature: T₁ = 300 K, Final temperature: T₂ = ? K
For a diatomic ideal gas: γ = 7/5
For an adiabatic process:
[tex]V^{\gamma-1 }T = constant[/tex]
[tex]V_{1}^{\gamma-1 }T_{1} = V_{2}^{\gamma-1 }T_{2}[/tex]
[tex]\left [\frac{V_{1}}{V_{2}} \right ]^{\gamma-1 } = \frac{T_{2}}{T_{1}}[/tex]
[tex]\left [10 \right ]^{\frac{7}{5}-1 } = \frac{T_{2}}{300 K}[/tex]
[tex]\left [10 \right ]^{\frac{2}{5} } = \frac{T_{2}}{300 K}[/tex]
[tex]2.512 = \frac{T_{2}}{300 K}[/tex]
[tex]T_{2} = 753.6 K[/tex]
Therefore, the final temperature of the given ideal diatomic gas: T₂ = 753.6 K
In the laboratory, a student uses a coffee cup calorimeter to determine the specific heat of a metal. She heats 18.1 grams of lead to 99.50°C and then drops it into a cup containing 81.7 grams of water at 23.00°C. She measures the final temperature to be 23.67°C. Assuming that all of the heat is transferred to the water, she calculates the specific heat of lead to be _____ J/g°C.
Answer:
[tex]specificheat=0.177J/g^{0}C[/tex]
Explanation:
The heat evolved by lead will be absorbed by water.
The heat evolved by lead will be:
[tex]Q1=massXspecificheatXchangeintemperature[/tex]
[tex]Q1=18.1X(Specificheat)X(99.50-23.67)[/tex]
Heat absorbed by water will be:
[tex]Q2=massXspecificheatX(changeintemperature)[/tex]
[tex]Q2=81.7X4.184(23.67-23)=229.03J[/tex]
We know that
Q1=Q2
[tex]18.1X(Specificheat)X(99.50-23.67)=229.03[/tex]
[tex]1372.523Xspecificheat=229.03[/tex]
[tex]specificheat=0.177J/g^{0}C[/tex]
The electronegativities for the elements vary from 0.7 for cesium to 4.0 for fluorine. The electronegativity for iodine is 2.5. Based entirely on the general guidelines for electronegativities and bond character:
a) binary compounds with iodine should all be polar covalent with a δ- on I.
b) binary compounds with iodine should all polar covalent with a δ+ on I.
c) compounds with iodine may be ionic, polar covalent, or nonpolar covalent.
d) no binary compounds with iodine should be substantially ionic.
Answer:
a) binary compounds with iodine should all be polar covalent with a δ- on I.
Explanation:
Electronegativity can be defined as the ability of an atom to attract shared pair of electrons towards itself.
the correct answer is a) binary compounds with iodine should all polar covalent with a δ- on I.
The binary compounds as the name suggests are compounds made of two elements. Halogens being the most electronegative element in periodic table , tend to attract the shared pair towards themselves. Iodine has high electronegativity and large atomic size hence it polarizes the electron cloud towards itself. Due to this it acquires a negative charge on it. therefore, bonds are polar with δ- charge on iodine.
Final answer:
Compounds with iodine may be ionic, polar covalent, or nonpolar covalent depending on the other element it is bonded with.
Explanation:
Based on the general guidelines for electronegativities and bond character, compounds with iodine may be ionic, polar covalent, or nonpolar covalent. The electronegativity of iodine is 2.5, which falls within the range where both ionic and polar covalent bonds can form. Therefore, binary compounds with iodine can exhibit a range of bond character depending on the other element it is bonded with.
An ionic compound is formed when there is a reaction between the elements
Ionic compounds are formed when a metal and a nonmetal react, leading to a transfer of electrons and the formation of ions. These ions are held together by ionic bonds, which demonstrate strong electrostatic attraction. These compounds display unique properties, including high melting and boiling points, and they can conduct electricity when dissolved or melted.
Explanation:An ionic compound is formed when an element composed of atoms that readily lose electrons (a metal) reacts with an element composed of atoms that readily gain electrons (a nonmetal). This process usually leads to a transfer of electrons, resulting in the production of ions. For example, sodium atoms can lose an electron to form positively charged sodium ions (Na+), while chlorine atoms can gain an electron to form negatively charged chloride ions (Cl-). A compound such as NaCl consists of these sodium and chloride ions held together by ionic bonds — the electrostatic attractions between oppositely charged ions.
Ionic compounds have certain distinct properties. They exhibit a crystalline structure and are usually rigid and brittle. Their melting and boiling points tend to be high, implying the strength of the ionic bonds. These compounds are poor conductors of electricity in their solid state due to the immobility of ions, but once dissolved or melted, they become excellent conductors because the ions are free to move.
Learn more about Ionic Compounds here:https://brainly.com/question/3222171
#SPJ3
[tex]H_2(g) + I_2(g) \longrightarrow 2HI(g)[/tex]
The forward reaction above is exothermic. At equilibrium, what happens if the reaction mixture is cooled at constant volume?
Select all that apply.
1. The reaction absorbs energy.
2. The reaction releases energy.
3. [H₂] and [I₂] increase.
4. [H₂] and [I₂] decrease.
5. [H₂] and [I₂] remain constant.
6. [HI] increases.
7. [HI] decreases.
8. [HI] remains constant.
If C is added to the equilibrium system above, in which direction will the equilibrium shift?
Answer:
The appropriate options are:
2. The reaction releases energy.
4. [tex][H_{2}][/tex] and [tex][I_{2}][/tex] increase.
6. [tex][HI][/tex] increases.
The addition of a non-reacting component C will have no effect on the equilibrium system at constant volume.
Explanation:
[tex]H_{2}+I_{2}\longrightarrow2HI(exothermic)[/tex]
The question can be answered by using Le Chatelier's principle.
According to Le Chatelier's Principle, for a exothermic reaction, decreasing the temperature at equilibrium will cause the forward reaction to occur.
If the forward reaction occurs, subsequently the concentrations of the reactants will decrease and that of the product will increase.
This is the reason for the options 4 and 6 being correct.
Exothermic reactions are the ones that release energy and endothermic reactions are the ones that absorb energy.
Since the forward reaction is exothermic, cooling the reaction mixture at constant volume, will lead to a release of energy.
This is the reason for the option 2 to be correct.
If a component C is added at constant volume, there will be no effect on the equilibrium system, assuming that the component C is non-reacting.
The concentration of that component C will increase, at constant volume.
The pH scale for acidity is defined by pH=−log10[H⁺] where [H⁺]is the concentration of hydrogen ions measured in moles per liter (M). A solution has a pH of 12.25. Calculate the concentration of hydrogen ions in moles per liter (M). The concentration of hydrogen ions is ___________ moles per liter.
Answer:
5.62 * 10^-13 moles per liter
Explanation:
The pH of a solution is the negative logarithm to base 10 of the concentration of hydrogen ions. What we simply do here is to input the information in the question into the equation:
pH=−log10[H⁺]
Here we know the pH but we do not know the concentration of the hydrogen ions.
12.25 = -log [H+]
log[H+] = -12.25
[H+] = 10^-12.25
[H+] = 5.62 * 10^-13 moles per liter
The concentration of hydrogen ions in the solution with a pH of 12.25 is calculated using the formula [H⁺] = 10^(-pH) which gives a result of 10^(-12.25) moles per liter.
Explanation:The pH scale for acidity is defined by pH=-log10[H+] where [H+] is the concentration of hydrogen ions. A solution has a pH of 12.25. Given that the pH = -log10[H⁺], to get the hydrogen ion concentration when the pH value is known, you rearrange the pH formula to the following: [H⁺] = 10^-pH. Substituting 12.25 for pH, the concentration of hydrogen ions in the solution is 10^(-12.25) moles per liter. This calculation is based on the principles of logarithms and the properties of the pH scale.
Learn more about pH scale here:https://brainly.com/question/1433865
#SPJ11