A bacteria culture starts with 200 bacteria and grows at a rate proportional to its size. After 6 hours there will be 1200 bacteria (1) Express the population after I hours as a function of t. population: p(tepe (1.066-21) (unction of t) (b) What will be the population after 7 hours? 348125.2 (c) How long will it take for the population to reach 1750 ? Note: You can earn partial credit on this problem.

Answers

Answer 1

Answer:

We are given that the rate of change is proportional to its size S

So, [tex]\frac{dS}{dt} \propto S[/tex]

[tex]\frac{dS}{dt} = kS[/tex]

[tex]\frac{dS}{S} = kdt[/tex]

Integrating both sides

[tex]\log(S)= kt + log c[/tex]

[tex]\frac{S}{S_0}=e^{kt}[/tex]

[tex]S=S_0 e^{kt}[/tex]

S is the population after t hours

[tex]S_0[/tex] is the initial population

Now we are given that After 6 hours there will be 1200 bacteria

[tex]1200=200 e^{6k}[/tex]

[tex]6=e^{6k}[/tex]

[tex]6^{\frac{1}{6}=e^{k}[/tex]

So, [tex]S=200 \times 6^{\frac{t}{6}[/tex]

a)Now the population after t hours as a function of t; [tex]S=200 \times 6^{\frac{t}{6}[/tex]

b)  What will be the population after 7 hours?

Substitute t = 7 hours

A bacteria culture starts with 200 bacteria

[tex]S=200 \times 6^{\frac{7}{6}}[/tex]

[tex]S=1617.607[/tex]

c) How long will it take for the population to reach 1750 ?

[tex]1750=200 \times 6^{\frac{t}{6}[/tex]

[tex]\frac{1750}{200} =6^{\frac{t}{6}[/tex]

[tex]8.75 =6^{\frac{t}{6}[/tex]

[tex]t=7.26[/tex]

So,  it will take 7.2 hours for the population to reach 1750

Answer 2

Final answer:

To determine the population growth function in terms of time and find the population after a specific duration, use the exponential growth formula N(t) = N0 x 2^t. Calculate the growth rate using given data points like the initial and final population. Finally, substitute the desired time into the population function to find the population at that specific time.

Explanation:

The population of bacteria after t hours can be represented by the formula N(t) = N0 x 2t.

(a) To express the population after t hours as a function of t, you can use the given data points to find the growth rate. For the provided data, the growth rate is calculated as r = log2(1200/200) / 6 = 0.1333 per hour.

(b) To find the population after 7 hours, substitute t=7 into the function: N(7) = 200 x 27x0.1333 = 3481.49.

c) To find out how long it will take for the population to reach 1750, we get

p(t)=1750 and solving it

t ≈7.846


Related Questions

Your bag of rice says to mix 1 cup of rice with 2 cups of water. dela requ prov a. What is the ratio of rice to water? refer to your no ncy ratio is id population inimum b. How much water would be needed to mix with 3 cups of rice? by to Sear 64 c. How much water would be need to mix with 1/3 cup of rice? (Hint: How did you do part b for this question? Do the same method for part c!) ed in a different re to se You have 42 tuto se them to ask a st

Answers

Answer:

(a) 1:2

(b) 6 cups

(c) [tex]\dfrac{2}{3}[/tex]

Step-by-step explanation:

(a) Given,

amount of rice mixture contains= 1 cup

amount of water mixture contains= 2 cups

[tex]\textrm{So, the ratio of rice to water}\ =\ \dfrac{\textrm{amount of rice in mixturte}}{\textrm{amount of water in mixture}}[/tex]

                                                              [tex]=\ \dfrac{1}{2}[/tex]

So, the ratio of rice to water is 1:2.

(b) Amount of rice in mixture = 3 cups

[tex]\textrm{So, the ratio of rice to water}\ =\ \dfrac{\textrm{amount of rice in mixturte}}{\textrm{amount of water in mixture}}[/tex]

                      [tex]=>\ \dfrac{1}{2}\ =\ \dfrac{3}{\textrm{amount of water in mixture}}[/tex]

                       => amount of water in mixture = 3 x 2

                                                                          = 6 cups

(c) [tex]\textrm{amount of rice in mixture}\ =\dfrac{1}{3}[/tex]

 [tex]\textrm{So, the ratio of rice to water}\ =\ \dfrac{\textrm{amount of rice in mixturte}}{\textrm{amount of water in mixture}}[/tex]

   [tex]=>\ \dfrac{1}{2}\ =\ \dfrac{\dfrac{1}{3}}{\textrm{amount of water in mixture}}[/tex]

  [tex]=>\textrm{amount of water in mixture}\ =\ \dfrac{2}{3}[/tex]

So, the amount of water in the mixture will be [tex]\dfrac{2}{3}[/tex] cup.

3 points | Previous Answers LarCalcET6 8.8.012. Ask Your Teacher My Notes Question Part Points Submissions Used Explain why the integral is improper. 0 e7x dx −[infinity] At least one of the limits of integration is not finite. The integrand is not continuous on (-[infinity], 0]. Determine whether it diverges or converges. converges diverges Evaluate the integral if it converges. (If the quantity diverges, enter DIVERGES.)

Answers

Answer:

The improper integral converges and [tex]\int_0^{-\infty} e^{7x}dx = -\frac{1}{7}[/tex].

Step-by-step explanation:

First, I assume that the integral in question is

[tex]\int_0^{-\infty} e^{7x}dx[/tex].

Now, the integral is improper because, at least, one of the limits is [tex]\pm\infty[/tex]. We need to recall that an improper integral

[tex]\int_0^{-\infty} f(x)dx[/tex]

converges, by definition, if the following limit exist:

[tex]\lim_{A\rightarrow -\infty} \int_0^A f(x)dx = \int_0^{-\infty} f(x)dx[/tex].

In this particular case we need to study the limit

[tex]\lim_{A\rightarrow -\infty} \int_0^A e^{7x}dx[/tex].

In order to complete this task we calculate the integral [tex]\int_0^A e^{7x}dx[/tex]. Then,

[tex]\int_0^A e^{7x}dx = \frac{e^{7x}}{7}\Big|_0^A = \frac{e^{7A}}{7} - \frac{1}{7}[/tex].

Substituting the above expression into the limit we have

[tex]\lim_{A\rightarrow -\infty} \frac{e^{7A}}{7} - \frac{1}{7} = - \frac{1}{7}[/tex]

because

[tex]\lim_{A\rightarrow -\infty} \frac{e^{7A}}{7}=0[/tex].

Exercise 5.6.6: Selecting a committee of senators. About A country has two political parties, the Demonstrators and the Repudiators. Suppose that the national senate consists of 100 members, 44 of which are Demonstrators and 56 of which are Rupudiators. (a) How many ways are there to select a committee of 10 senate members with the same number of Demonstrators and Repudiators? Suppose that each party must select a speaker and a vice speaker. How many ways are there for the two speakers and two vice speakers to be selected? Feedback?

Answers

Answer:

There are 4,148,350,734,528 ways

Step-by-step explanation:

We have

44 senators which are Demonstrators.56 senators which are Repudiators.

(a) How many ways are there to select a committee of 10 senate members with the same number of Demonstrators and Repudiators?

We want to choose 5 Demonstrators and 5 Repudiators. The number of ways to do this is [tex]{44} \choose {5}[/tex] and [tex]56 \choose 5[/tex] respectively. Therefore, the number of ways to select the committee is given by:

[tex]{{44}\choose {5}} \times {{56}\choose{5}}=\frac{44!}{39!5!}\times\frac{56!}{51!5!}=\frac{44!56!}{51!39!5!5!}=\frac{44\times43\times42\times41\times40\times56\times55\times54\times53\times52}{5!5!}=\\\\=\frac{44\times43\times42\times41\times8\times56\times11\times54\times53\times52}{4!4!}= \frac{11\times43\times42\times41\times2\times56\times11\times54\times53\times52}{3!3!}=\\\\\frac{11\times43\times14\times41\times2\times56\times11\times18\times53\times52}{2!2!}=[/tex]

[tex]11\times43\times14\times41\times28\times11\times18\times53\times52=4,148,350,734,528[/tex]

(b) Suppose that each party must select a speaker and a vice speaker. How many ways are there for the two speakers and two vice speakers to be selected?

If the speaker and vice speaker are chosen between all senators: In this case, the answer will be

[tex]44\times43\times56\times55=5,827,360.[/tex]

This is because there are (in the case of Demonstrators) 44 possibilities to choose an speaker and after choosing one, there would be 43 possibilities to choose a vice speaker. The same situation happens in the case of Repudiators.

If the speaker and vice speaker are chosen between the committee: In this case, the answer will be

[tex]5\times4\times5\times4=400[/tex].

Final answer:

To select a committee with an equal number of members from both parties, we use the combination formula to calculate the number of ways to choose 5 out of 44 Demonstrators and 5 out of 56 Repudiators, and then multiply these numbers together. For selecting speakers and vice speakers, we multiply the number of possible choices for each position within each party. The committee selection results in 4,149,395,102,528 ways, and selecting speakers and vice speakers yields 5,825,760 ways.

Explanation:

For part (a), if the committee requires an equal number of members from both parties, and we have 44 Demonstrators and 56 Repudiators, we need to select 5 members from each party to have a committee of 10 with an equal number of senators from both parties.

The number of ways to select 5 Demonstrators from 44 is given by the combination formula C(44, 5), which represents the number of ways to choose 5 members out of 44 without regard to order. Similarly, the number of ways to select 5 Repudiators from 56 is C(56, 5).

To find the total number of ways to form the committee, we multiply the two results:

C(44, 5) = 44! / (5! * (44-5)!) = 1,086,008C(56, 5) = 56! / (5! * (56-5)!) = 3,819,416

The total number of ways is 1,086,008 * 3,819,416 = 4,149,395,102,528 ways.

For the selection of speakers and vice speakers, for each party, we can choose 1 speaker and 1 vice speaker. There are 44 Demonstrators, so there are 44 choices for the speaker and 43 choices for the vice speaker since the same person cannot hold both positions. Similarly, there are 56 Repudiators, so there are 56 choices for the speaker and 55 for the vice speaker.

The total number of ways to select the speakers and vice speakers for both parties is:

44 * 43 for the Demonstrators56 * 55 for the Repudiators

Final calculation: (44 * 43) * (56 * 55) = 1,892 * 3,080 = 5,825,760 ways.

Using a sample of 40 patients from a local hospital, researchers measured cholesterol level in an attempt to estimate the mean cholesterol level of U.S. citizens.
Is this study
A. REPRESENTATIVE?
B. NON-REPRESENTATIVE?

Answers

Answer:

Non representative

Step-by-step explanation:

A representative sample would be a subset of a population that accurately describes some characteristic from a larger group of people.

A sample of 40 patients from a local hospital is not a big enough sample to estimate the mean cholesterol level of U.S citizens (citizens from an entire country).

Therefore, this sample would be non representative.

Determine the equation of the line that passes through the points of intersection of the graphs of the quadratic functions f(x) = x^2 – 4 and g(x) = – 3x^2 + 2x + 8.

Answers

Answer:[tex]x-2y-2=0[/tex]

Step-by-step explanation:

Given :

[tex]f(x) = x^2 - 4 \\ g(x) = - 3x^2 + 2x + 8[/tex]

Point of intersection :

[tex]f(x)=g(x)\\x^2-4=-3x^2+2x+8\\4x^2-2x-12=0\\2x^2-x-6=0\\2x^2-4x+3x-6=0\\2x(x-2)+3(x-2)=0\\(x-2)(2x+3)=0\\x=2\,,\,\frac{-3}{2}[/tex]

[tex]x=2\,;f(2)=2^2-4=0\\x=\frac{-3}{2}\,; f\left ( \frac{3}{2} \right )=\left ( \frac{3}{2} \right )^2-4=\frac{-7}{4}=-1.75[/tex]

So, we have points [tex]\left ( 2,0 \right )\,,\,\left ( -1.5,-1.75\ \right )[/tex]

Equation of line passing through two points [tex]\left ( x_1,y_1 \right )\,,\,\left ( x_2,y_2 \right )[/tex] is given by [tex]y-y_1=\frac{y_2-y_1}{x_2-x_1}\left ( x-x_1 \right )[/tex]

Let [tex]\left ( x_1,y_1 \right )=\left ( 2,0 \right )\,,\,\left ( x_2,y_2 \right )=\left ( -1.5,-1.75\ \right )[/tex]

So, equation is as follows :

[tex]y-0=\frac{-1.75-0}{-1.5-2}\left ( x-2 \right )\\y=\frac{-1.75}{-3.5}\left ( x-2 \right )\\y=\frac{1}{2}(x-2)\\2y=x-2\\x-2y-2=0[/tex]

A certain firm has plants A, B, and C producing respectively 35%, 15%, and 50% of the total output. The probabilities of a non-defective product are, respectively, 0.75, 0.95, and 0.85. A customer receives a defective product. What is the probability that it came from plant C?

Answers

Answer:

There is a 44.12% probability that the defective product came from C.

Step-by-step explanation:

This can be formulated as the following problem:

What is the probability of B happening, knowing that A has happened.

It can be calculated by the following formula

[tex]P = \frac{P(B).P(A/B)}{P(A)}[/tex]

Where P(B) is the probability of B happening, P(A/B) is the probability of A happening knowing that B happened and P(A) is the probability of A happening.

-In your problem, we have:

P(A) is the probability of the customer receiving a defective product. For this probability, we have:

[tex]P(A) = P_{1} + P_{2} + P_{3}[/tex]

In which [tex]P_{1}[/tex] is the probability that the defective product was chosen from plant A(we have to consider the probability of plant A being chosen). So:

[tex]P_{1} = 0.35*0.25 = 0.0875[/tex]

[tex]P_{2}[/tex] is the probability that the defective product was chosen from plant B(we have to consider the probability of plant B being chosen). So:

[tex]P_{2} = 0.15*0.05 = 0.0075[/tex]

[tex]P_{3}[/tex] is the probability that the defective product was chosen from plant B(we have to consider the probability of plant B being chosen). So:

[tex]P_{3} = 0.50*0.15 = 0.075[/tex]

So

[tex]P(A) = 0.0875 + 0.0075 + 0.075 = 0.17[/tex]

P(B) is the probability the product chosen being C, that is 50% = 0.5.

P(A/B) is the probability of the product being defective, knowing that the plant chosen was C. So P(A/B) = 0.15.

So, the probability that the defective piece came from C is:

[tex]P = \frac{0.5*0.15}{0.17} = 0.4412[/tex]

There is a 44.12% probability that the defective product came from C.

Find all the values of:

a. (-i)^i

b. (-1)^i

please help we with this complex variable problem.

Answers

Answer with Step-by-step explanation:

Part 1)

we know that

[tex]e^{i\theta }=cos(\theta )+isin(\theta )[/tex]

thus [tex]-i=e^{\frac{-i\times (4n-1)\pi }{2}}[/tex]

thus [tex](-i)^i=(e^{\frac{-i\times (4n-1)\pi }{2}})^i\\\\(-i)^i=e^{\frac{-i^2\times (4n-1)\pi }{2}}=e^{\frac{(4n-1)\pi }{2}}\\\\\therefore (-i)^i=e^{\frac{(4n-1)\pi }{2}}[/tex] where 'n' is any integer

Part 2)

We have [tex]-1=e^{(2n+1)\pi }\\\\\therefore (-1)^{i}=(e^{i(2n+1)\pi })^{i}\\\\(-1)^i=(e^{i^2(2n+1)\pi })\\\\(-1)^i=e^{-(2n+1)\pi }[/tex] where 'n' is any integer

EXERCISES 1. For n = 15, 18, 22, 30, and 35, find all positive integers less than n and relatively prime to n.

Answers

Answer :

As per the question,

Note:

''A positive integer is any integer that is greater than zero (0)''.  Also, a positive integer is any integer that is a member of the set of natural numbers, i.e., counting numbers; therefore, the positive integers are: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 34, 25, 26, 27, 28, 29, 30, 31, 32, 33, ...

“Relatively Prime” (also called “co-prime”) numbers are numbers whose HCF is 1.  Any consecutive positive integers are co-prime (e.g.: 42 and 43)

Now,

First case: If n = 15

Positive integers (less than n = 15) are: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13 and 14.

Relatively prime are : (1 and 15), (2 and 15), (4 and 15), (7 and 15), (8 and 15),  (11 and 15), (13 and 15) and (14 and 15).

Second case: If n = 18

Positive integers (less than n = 18) are: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16 and 17.

Relatively prime are : (1 and 18), (5 and 18), (7 and 18), (11 and 18), (13 and 18) and (17 and 18).

Third case: If n = 22

Positive integers (less than n = 22) are: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20 and 21.

Relatively prime are : (1 and 22), (3 and 22), (5 and 22), (7 and 22), (9 and 22),  (13 and 22), (15 and 22),  (17 and 22),  (19 and 22) and (21 and 22).

Fourth case: If n = 30

Positive integers (less than n = 30) are: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28 and 29.

Relatively prime are : (1 and 30), (7 and 30), (11 and 30), (13 and 30),

(17 and 30), (19 and 30), (23 and 30) and (29 and 30).

Fifth case: If n = 35

Positive integers (less than n = 35) are: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 31, 32, 33 and 34.

Relatively prime are : (1 and 35), (2 and 35), (3 and 35), (4 and 35), (6 and 35), (8 and 35), (9 and 35), (11 and 35), (12 and 35), (13 and 35), (16 and 35), (17 and 35), (18 and 35), (19 and 35), (22 and 35), (23 and 35), (24 and 35), (26 and 35), (27 and 35), (29 and 35), (31 and 35), (32 and 35), (33 and 35) and (34 and 35).

what equation is graphed in this figure

Answers

Answer:

tatho you get the aswer

Step-by-step explanation:

all you have to do is add

Answer:

noice

Step-by-step explanation:

A frog is climbing out of a well that is 11 feet deep. The frog can climb 3 feet per hour but then it rests for an hour, during which it slips back 1 foot. How long will it take for the frog to get out of the well?

Answers

Answer:

It takes the frog 7 hours to get out of the well.

Step-by-step explanation:

We know that the well is 11 feet deep and the frog can climb 3 feet per hour.

Each time it climbs, it rests for an hour, and decreases its height by 1 foot.

So, if the frog reaches 3 feet in the first hour, then in the next hour it is 2 feet.

Lets calculate with the same pattern:

1st hour: 3 feet

2nd hour: [tex]3-1=2[/tex] feet

3rd hour: [tex]2+3=5[/tex] feet

4th hour: [tex]5-1=4[/tex] feet

5th hour: [tex]4 +3= 7[/tex] feet

6th hour: [tex]7-1=6[/tex] feet

5th hour: [tex]6+3=9[/tex] feet

6th hour: [tex]9-1=8[/tex] feet

7th hour:  [tex]8+3= 11[/tex] feet

Therefore, it takes the frog 7 hours to get out of the well.

Final answer:

To find out how long it takes for a frog to climb out of an 11-foot deep well, we calculate the net gain of height over time considering its climbing rate and slipping back. It will take the frog a total of 11 hours to escape the well.

Explanation:

The question involves a frog climbing out of a well and deals with a sequence of movements that include climbing and slipping back. Each hour, the frog climbs 3 feet but then slips back 1 foot during the rest hour.

To solve this, we perform a step-by-step calculation to determine the total time required for the frog to climb out of an 11-foot deep well. The frog makes a net gain of 2 feet for every 2 hours (3 feet up in the first hour and slips back 1 foot in the next hour).

Hours 1-2: Net gain = 2 feetHours 3-4: Net gain = 4 feetHours 5-6: Net gain = 6 feetHours 7-8: Net gain = 8 feetHours 9-10: Net gain = 10 feet

However, on the final climb, the frog does not slip back since it will climb out of the well. Therefore, in the 11th hour, the frog climbs the remaining 1 foot and escapes the well.

So, the total time taken is 11 hours.


True or False? When computing descriptive statistics, we are interested only in describing our data, most often in terms of measures of central tendency and variability.

Answers

Answer:

True

Step-by-step explanation:

Yes, In Descriptive Statistics we are most often interested in the summary of data in words. It is done by describing the features of the data. Mostly we explain the five-number summary of the data, central tendency of data, dispersion, skewness, etc. Overall we summarize the quantitative data in words.

Calculate:

462 grams(g)=____milligrams (mg)

Answers

Answer:

462 000mg

Step-by-step explanation:

1gram = 1000milligrams

Hence...462 grams...,

; 462 × 1000 = 462 000mg

462 grams is equal to 462,000 milligrams .

To convert grams ( g ) to milligrams ( mg ), you need to use the following conversion factor:

1 gram ( g ) = 1000 milligrams ( mg )

milligram (mg) is equal to 1/1000 grams (g).

1 mg = (1/1000) g = 0.001 g

The mass m in grams (g) is equal to the mass m in milligrams (mg) divided by 1000:

m(g) = m(mg) / 1000

This means that there are 1000 milligrams in 1 gram. Now, let's use this conversion factor to calculate 462 grams in milligrams:

462 grams * ( 1000 mg / 1 g ) = 462,000 milligrams

So, 462 grams is equal to 462,000 milligrams.

To know more about milligrams click here :

https://brainly.com/question/29827935

#SPJ2

A quadratic function is a function of the form y=ax^2+bx+c where a, b, and c are constants. Given any 3 points in the plane, there is exactly one quadratic function whose graph contains these points. Find the quadratic function whose graph contains the points (0, -2), (-5, -17), and (3, -17). Enter the equation below. Function: y = 0

Answers

Final answer:

To find the quadratic function whose graph contains the points (0, -2), (-5, -17), and (3, -17), we can substitute the x and y values of each point into the standard quadratic function equation y = ax² + bx + c...Therefore, the quadratic function whose graph contains the points (0, -2), (-5, -17), and (3, -17) is y = -x² - 2x - 2.

Explanation:

To find the quadratic function whose graph contains the points (0, -2), (-5, -17), and (3, -17), we can substitute the x and y values of each point into the standard quadratic function equation y = ax^2 + bx + c. This will give us a system of three equations with three variables (a, b, c) that we can solve to find the values of a, b, and c.

Substituting the coordinates (0, -2), we get -2 = a(0)²+ b(0) + c, which simplifies to -2 = c.

Substituting the coordinates (-5, -17), we get -17 = a(-5)² + b(-5) + c, which simplifies to -17 = 25a - 5b + c.

Substituting the coordinates (3, -17), we get -17 = a(3)² + b(3) + c, which simplifies to -17 = 9a + 3b + c.

Since we know that c = -2, we can substitute this value into the other two equations to get -17 = 25a - 5b - 2 and -17 = 9a + 3b - 2.

Simplifying these equations, we get:

25a - 5b = -15 (equation 1)

9a + 3b = -15 (equation 2)

Now we can solve this system of equations using any method such as substitution or elimination to find the values of a and b.

Multiplying equation 1 by 3 and equation 2 by 5, we get:

75a - 15b = -45 (equation 3)

45a + 15b = -75 (equation 4)

Adding equation 3 and equation 4 together, we eliminate the variable b and get:

120a = -120

Dividing both sides by 120, we get a = -1.

Substituting this value of a back into equation 1, we get:

25(-1) - 5b = -15

-25 - 5b = -15

Adding 25 to both sides, we get -5b = 10.

Dividing both sides by -5, we get b = -2.

Therefore, the quadratic function whose graph contains the points (0, -2), (-5, -17), and (3, -17) is y = -x² - 2x - 2.

The federal government requires a car manufacturer to have a minimum miles per gallon (mpg) average over the models it makes. Suppose that the average mpg for the four models manufactured is 24 mpg and the government standard is 31 mpg. The manufacturer will add a model. What mileage must the new model get so that the manufacturer meets the government requirement?

Answers

Answer:

The mileage must the new model get so that the manufacturer meets the government requirement is 59 mpg.

Step-by-step explanation:

Consider the provided information.

Here it is given that the average mpg for the four models manufactured is 24 mpg.

The total mpg for the four models = 4 × 24 = 96

The manufacturer will add a model and the government standard is 31 mpg.

This can be written as:

[tex]\frac{96+x}{5}=31[/tex]

[tex]96+x=155[/tex]

[tex]x=155-96[/tex]

[tex]x=59[/tex]

Hence, the mileage must the new model get so that the manufacturer meets the government requirement is 59 mpg.

Final answer:

The new model car must achieve 59 mpg in order for the manufacturer to meet the government requirement of an average of 31 mpg when this model is added to the existing four models that average 24 mpg.

Explanation:

The student has asked what mileage a new model car must get so that the manufacturer meets the government requirement of an average of 31 miles per gallon (mpg). Currently, the average mpg for the manufacturer's four models is 24 mpg.

To calculate the required mpg for the fifth model, we use the formula for the average of a set of numbers, which is the sum of all numbers divided by the number of items. In this case, if x is the mpg the new model needs to achieve, the equation is:

(4 ×24 + x) / 5 = 31

Which simplifies to:

96 + x = 155

Therefore:

x = 155 - 96

x = 59 mpg

The new model will need to have an efficiency of 59 mpg for the manufacturer to meet the Corporate Average Fleet Efficiency (CAFE) standard of 31 mpg.

The total number of human genomic characters is 3.5 billion. Express this quantity numerically without using a decimal

Answers

Answer:

3,500,000,000

Step-by-step explanation:

The total number of human genomic characters is 3.5 billion.

Expressing this quantity numerically without using a decimal we can write it as ;

3,500,000,000

I need help with basic geometry.
Select all the statements that apply to this figure. Please HELp

Answers

Answer:

The correct answers are marked.

Step-by-step explanation:

Line k is indicated as perpendicular to RX by the little square at their point of intersection.

Congruence of different line segments will be indicated by marks on them, or by the nature of the geometry containing them (a parallelogram, for instance). There is nothing in this diagram indicating RZ is congruent to GR.

The named points, X, B, V, N, are all shown as being in plane F, so are coplanar.

A plane contains an infinite number of points. In the diagram, there are 5 named points in plane F.

The endpoint of ray RH is point R, which is on line K. However, that is the extent of their intersection. Ray RH heads off in a different direction than line k, so is not part of it.

Segment VN is in plane F; ray RH is not in the plane, but is skew to segment VN. They are not headed in the same direction.

Points R and G are both on line k, so line RG is the same as line k.

In the given figure, line K is perpendicular to RX, points X, B, V, and N are coplanar in plane F, and line RG is the same as line K.

1. Line K is perpendicular to RX:

  - This statement is true because there is a right-angle symbol (∟) at the intersection point of lines K and RX, indicating that line K is perpendicular to line RX.

2. RZ is congruent to GR:

  - There is no information or markings in the given description that suggest RZ is congruent to GR. Congruence typically requires specific markings or information about the lengths or angles of the line segments, which are not provided in this description.

3. Points X, B, V, and N are coplanar:

  - This statement is true. Coplanar points are points that lie in the same plane. In the description, it's mentioned that all these points are in plane F, so they are indeed coplanar.

4. Plane F contains six points:

  - This statement is not true. Plane F contains only five named points (R, X, B, V, N) as indicated in the description.

5. Ray RH is part of line K:

  - This statement is not true. While the endpoint of ray RH is point R, which is on line K, ray RH heads off in a different direction than line K and does not extend along line K, so it's not considered part of line K.

6. VN is headed the same direction as RH:

  - This statement is not true. Segment VN and ray RH are not headed in the same direction. VN is a line segment in plane F, while RH is a ray that extends from point R but does not align with VN.

7. Line RG is the same as line K:

  - This statement is true. Both line RG and line K coincide and are represented by the same line in the figure, indicating that they are the same line.

So, statements 1, 3, and 7 are the accurate descriptions of the figure based on the information provided.

To know more about coplanar, refer here:

https://brainly.com/question/17688966

#SPJ3

A square matrix A E Rn is said to be skew-symmetric if A =-A Prove that if A is skew-symmetric, then x'Ax = 0 for all x E R". (Hint The T T T quantity x'Ax is scalar so that (x'Ax) = x'Ax)

Answers

Answer:

You can use the given hint as follows:

Step-by-step explanation:

Let [tex]A[/tex] be a square matrix that is a skew-symmetric matrix. Since the matrix [tex]R={\bf x}^{T}A{\bf x}[/tex] is matrix of size [tex]1\times 1[/tex] then it can be identified with an scalar. It is clear that [tex]R=R^{T}[/tex]. Then applying the properties of transposition we have

[tex]({\bf x}^{T}A{\bf x})^{T}=({\bf x}^{T})A^{T}({\bf x}^{T})^{T}={\bf x}^{T}(-A){\bf x}=-{\bf x}^{T}A{\bf x}[/tex]

Then,

[tex]{\bf x}^{T}A{\bf x}+{\bf x}^{T}A{\bf x}=0[/tex]

[tex]2{\bf x}^{T}A{\bf x}=0[/tex]

Then,

[tex]{\bf x}^{T}A{\bf x}=0[/tex]

For all column vector [tex]{\bf x}[/tex] of size [tex]n\times 1[/tex] .

Find the general solution of the differential equation: y' + 3x^2 y = 0

Answers

Answer:

The general solution of the differential equation y' + 3x^2 y = 0 is:

[tex]y=e^{-x^3+C}[/tex]

Step-by-step explanation:

This equation its a Separable First Order Differential Equation, this means that you can express the equation in the following way:

[tex]\frac{dy}{dx} = f_1(x)*f_2(x)[/tex], notice that the notation for y' is changed to [tex]\frac{dy}{dx}[/tex]

Then you can separate the equation and put the x part of the equation on one side and the y part on the other, like this:

[tex]\frac{1}{f_2(x)}dy=f_1(x)dx[/tex]

The Next step is to integrate both sides of the equation separately and then simplify the equation.

For the differential equation in question y' + 3x^2 y = 0 the process is:

Step 1: Separate the x part and the y part

[tex]\frac{1}{y}dy=3x^2}dx[/tex]

Step 2: Integrate both sides

[tex]\int\frac{1}{y}dy=\int 3x^2}dx[/tex]

Step 3: Solve the integrals

[tex]Ln(y)+C=-x^3+C[/tex]

Simplify the equation:

[tex]Ln(y)=-x^3+C[/tex]

To solve the Logarithmic expression you have to use the exponential e

[tex]e^{Ln(y)}=e^{-x^3+C}[/tex]

Then the solution is:

[tex]y= e^{-x^3+C}[/tex]

Evaluate the function at the given value and simplify.

f(x)=−5x+1

, f(−2)

Question 4 options:

a)

-9

b)

11

c)

-11

d)

9

e)

none

Answers

Answer:

The correct option is b.

Step-by-step explanation:

The given function is

[tex]f(x)=-5x+1[/tex]

We need to find the value of f(-2). It means we have to find the value of given function at x=-2.

Substitute x=-2 in the given function to find the value of f(-2).

[tex]f(-2)=-5(-2)+1[/tex]

On simplification we get

[tex]f(-2)=10+1[/tex]

[tex]f(-2)=11[/tex]

The value of f(-2) is 11. Therefore the correct option is b.

HOW LONG WILL AN "H" CYLINDER LAST IF IT HAS 1350 PSIG IN IT AND IT RUNS AT 6 LPM?

Answers

Answer:

11.78 hours.

Step-by-step explanation:

We are asked to find the time that an "H" cylinder will last having 1350 PSI of gas in it at a flow of 6 LPM.

[tex]\text{Duration of tank (in minutes)}=\frac{\text{Tank pressure (in PSI)}\times\text{Conversion factor}}{\text{Flow (LPM)}}[/tex]

[tex]\text{Duration of H tank (in minutes)}=\frac{1350\times 3.14}{6}[/tex]

[tex]\text{Duration of H tank (in minutes)}=\frac{4239}{6}[/tex]

[tex]\text{Duration of H tank (in minutes)}=706.5[/tex]

To convert the time in hours, we will divide 706.5 by 60 as i hour equals 60 minutes.

[tex]\text{Duration of H tank (in hours)}=\frac{706.5}{60}[/tex]

[tex]\text{Duration of H tank (in hours)}=11.775[/tex]

Therefore, it will take 11.78 hours to last the given cylinder.

In a baseball league consisting of 12 teams, each team plays each of the other teams twice. How many games will be played? There will be games played. Enter your answer in the answer box and then click Check Answer Clear All All parts showing bmt12 0102.ppt bmt12 data-8 30 201.. xlsx data-8 30 201....xlsx Macbook

Answers

Answer:

132 games played.

Step-by-step explanation:

Let x be the

We have been given that in a baseball league consisting of 12 teams, each team plays each of the other teams twice.

Since there are 12 teams, so each team will play with [tex](12-1)[/tex] teams except itself.

The total number of games played would be 12 times [tex](12-1)[/tex]:

[tex]\text{The total number of games played}=12(12-1)[/tex]

[tex]\text{The total number of games played}=12(11)[/tex]

[tex]\text{The total number of games played}=132[/tex]

Therefore, there will be 132 games played.

Final answer:

The total number of games that will be played in the baseball league with 12 teams is 66.

Explanation:

To find the number of games that will be played in the baseball league, we need to consider that each team plays each of the other teams twice. Since there are 12 teams, each team will play 11 other teams. However, this counts each game twice (once for each team).

So, to find the total number of games, we can use the formula: Total number of games = (Number of teams * Number of teams - Number of teams) / 2.

Substituting the values, we get: Total number of games = (12 * 12 - 12) / 2 = 66.

For the final days before the election, the campaign manager has a total of $41,500 to spend on TV and radio campaign advertisements. Each TV ad costs $3000 and is seen by 10,000 voters, while each radio ad costs $500 and is heard by 2000 voters. Ignoring repeated exposures to the same voter, how many TV and radio ads will contact 148,000 voters using the allocated funds?

Answers

Answer: There are 9 T.V. and 29 radio ads.

Step-by-step explanation:

Since we have given that

Total amount spend on TV and radio = $41,500

Total number of voters using the allocated funds = 148,000

Let the number of TV be 'x'.

Let the number of radio ads be 'y'.

Cost of each TV = $3000

Cost of each radio ads = $500

Number of voters see T.V. = 10,000

Number of voters use radio = 2000

So, According to question, it becomes,

[tex]3000x+500y=\$41500\implies\ 30x+5y=415\\\\10000x+2000y=148000\implies 10x+2y=148[/tex]

Using the graphing method, we get that

These two lines are intersect at (9,29).

Hence, there are 9 T.V. and 29 radio ads.

Answer:  9 TV ads and 29 radio ads will contact 148,000 voters using the allocated funds .

Step-by-step explanation:

Let x denotes the number of users of TV ads and y denotes the number of radio ads.

Then by considering the given information, we have the foolowing system of equation:-

[tex]\text{Number of voters}\ :10000x+2000y=148000----(1)\\\\\text{Total costs}\ :3000x+500y=41500------(2)[/tex]

Multiply 4 on both sides of equation (2) , we get

[tex]12000x+2000y=166000---------(3)[/tex]

Subtract (1) from (3) , we get

[tex]2000x=18000\\\\\Rightarrow\ x=\dfrac{18000}{2000}=9[/tex]

Put x= 9 , in (2), we get;

[tex]3000(9)+500y=41500\\\\\Rightarrow\ 27000+500y=41500\\\\\Rightarrow\ 500=14500\\\\\Rightarrow\ y=\dfrac{14500}{500}=29[/tex]

Hence, the number of TV ads will be 9 and the number of radio ads will will be 29.

Question 3. Let f:X --> Y be a function. (a) Recall that for C CY, the inverse image of C is the set f-1(C) = {x E X|f(x) E C}. Let A, B CY. Prove that f-1(ANB) Cf-1(A) n f-1(B). (b) Recall that for D C X, the image of D under f is the set f(D) = {f(x) E YX E X}. Let A, B C X. Prove that f(An B) c f(A)n F(B). Find an example of a function f and sets A and B such that f(ANB) = Ø but f(A) n f(B) + Ø.

Answers

Answer:

Step-by-step explanation:

a) We want to prove that [tex]f^{-1}(A\cap B)\subset f^{-1}(A)\cap f^{-1}(B)[/tex]. Then, we can do that proving that every element of  [tex]f^{-1}(A\cap B)[/tex] is an element of [tex]f^{-1}(A)\cap f^{-1}(B)[/tex] too.

Then, suppose that [tex]x\in f^{-1}(A\cap B)[/tex]. From the definition of inverse image we know that [tex]f(x)\in A\cap B[/tex], which is equivalent to [tex]f(x)\in A[/tex] and [tex]f(x)\in B[/tex]. But, as [tex] f(x) \in A [/tex] we can affirm that [tex]x\in f^{-1}(A)[/tex] and, because  [tex]f(x)\in B[/tex] we have [tex]x\in f^{-1}(B)[/tex].

Therefore, [tex]x\inf^{-1}(A)\cap f^{-1}(B)[/tex].

b) We want to prove that [tex]f(A\cap B) \subset f(A)\cap f(B)[/tex]. Here we will follow the same strategy of the above exercise.

Assume that [tex]y\in f(A\cap B)[/tex]. Then, there exists [tex]x\in A\cap B[/tex] such that [tex]y=f(x)[/tex]. But, as [tex]x\in A\cap B[/tex] we know that [tex]x\in A[/tex] and [tex]x\in B[/tex]. From this, we deduce [tex]f(x)=y\in f(A)[/tex] and [tex]f(x)=y\in f(B)[/tex]. Therefore, [tex]y\in f(A)\cap f(B)[/tex].

c) Consider the constant function [tex]f(x)=1[/tex] for every real number [tex]x[/tex]. Take the sets [tex]A=(0,1)[/tex] and [tex]B=(1,2)[/tex].

Notice that [tex]A\cap B = (0,1)\cap (1,2)[/tex]=Ø, so [tex]f(A\cap B)[/tex]=Ø. But [tex]f(A) = \{1\}[/tex] and [tex]f(B) = \{1\}[/tex], so [tex]f(A)\cap f(B) =\{1\}[/tex].

Where does the term Algorithm from?

Answers

Answer:

The term algorithm derives from the title of the Persian and Muslim mathematician of the 9th century Abu Abdullah Muhammad ibn Musa Al-Khwarizmi.

Step-by-step explanation:

The term algorithm derives from the title of the Persian and Muslim mathematician of the 9th century Abu Abdullah Muhammad ibn Musa Al-Khwarizmi. He was a mathematician, astronomer, and geographer during  Abbasid Caliphate and he was a researcher at the House of Wisdom in Baghdad.

His systematic method of analyzing linear and quadratic problems resulted in algebra. It is a title derived from all his  collection of 830 book title on the topic, "The Compendious Book on Completion and Balancing Calculation."

Provide a beautiful proof of the following claim: The square of a rational number is a rational number.

Answers

Answer:

Square of a rational number is a rational number.

Step-by-step explanation:

Let m be a rational number. Thus, m can be written in the form of  fraction [tex]\frac{x}{y}[/tex], where x and y are integers and [tex]y \neq 0[/tex].

The square of m = [tex]m\times m = m^2[/tex]

[tex]m^2 = \frac{x}{y} \times\frac{x}{y} = \frac{x^2}{y^2}[/tex]

It is clearly seen, that [tex]m^2[/tex], can be easily written in the form of fraction and the denominator is not equal to zero.

Hence, [tex]m^2[/tex] is a rational number.

This can also be understood with the help of the fact that rational numbers are closed under multiplication that is product of a rational number is also a rational number.

A shipment of beach balls with a mean diameter of 28 cm and a standard deviation of 1.3 cm is normally distributed. By how many standard deviations does a beach ball with a diameter of 26.7 cm differ from the mean?

a. 1

b. 1.3

c. 2

d. 3

Answers

Answer: a. 1

Step-by-step explanation:

Given : Population mean :[tex]\mu=28\ cm[/tex]

Standard deviation : [tex]\sigma=1.3\ cm[/tex]

Let n be the number of times  a beach ball with a diameter of 26.7 cm differ from the mean.

Then, we have

[tex]28-n(1.3)=26.7\\\\\Rightarrow\ 1.3n=28-26.7\\\\\Rightarrow\ 1.3 n=1.3\\\\\Rightarrow\ n=1[/tex]

Hence, a beach ball with a diameter of 26.7 cm is 1 standard deviation differ from the mean.

Va box contains 4 red marbles and 7 green remove 3 at once probability of 3 red

Answers

Answer:

0.024

Step-by-step explanation:

Given,

Red marbles = 4,

Green marbles = 7,

Total marbles = 4 +7 = 11,

Ways of choosing 3 marbles =[tex]^{11}C_3[/tex]

Ways of choosing 3 red marble = [tex]^4C_3[/tex]

Hence, the probability of 3 red marble = [tex]\frac{^4C_3}{^{11}C_3}[/tex]

[tex]=\frac{\frac{4!}{3!1!}}{\frac{11!}{3!8!}}[/tex]

[tex]=\frac{4}{165}[/tex]

0.024

Using a 10-mL graduate calibrated in 1-mL units, explain how you would measure 1.25 mL of a dye solution by the aliquot method. Use water as the diluent. Module 3: Units of Measurement 2 0

Answers

Answer:

Take 5 ml of dye and add 3 ml of water

Thus,

The total volume of solution becomes = 8 mL

now,

This solution of 8 mL contains [tex]\frac{\textup{5}}{\textup{8}}[/tex] part of dye and [tex]\frac{\textup{3}}{\textup{8}}[/tex] part of water.

Next step is to take out 2 mL of solution

thus,

Volume of dye in 2 mL solution = [tex]\frac{\textup{5}}{\textup{8}}\times2\ mL[/tex]

or

Volume of dye in 2 mL solution = 1.25 mL

hence,

the 1.25 mL dye is measured.

Step-by-step explanation:

Given:

10-mL graduate calibrated in 1-mL units

dye solution to be measured = 1.25 mL

Now,

take 5 ml of dye and add 3 ml of water

Thus,

The total volume of solution becomes = 8 mL

now,

This solution of 8 mL contains [tex]\frac{\textup{5}}{\textup{8}}[/tex] part of dye and [tex]\frac{\textup{3}}{\textup{8}}[/tex] part of water.

Next step is to take out 2 mL of solution

thus,

Volume of dye in 2 mL solution = [tex]\frac{\textup{5}}{\textup{8}}\times2\ mL[/tex]

or

Volume of dye in 2 mL solution = 1.25 mL

hence,

the 1.25 mL dye is measured.

Final answer:

To measure 1.25 mL of a dye solution using a 10-mL graduate, fill it with water up to the 1 mL mark. Add the dye solution drop by drop until the meniscus reaches the 2.25 mL mark.

Explanation:

To measure 1.25 mL of a dye solution using a 10-mL graduate calibrated in 1-mL units and water as the diluent, you can follow these steps:

Fill the graduate with water up to the 1 mL mark.Add the dye solution drop by drop until the meniscus reaches the 2.25 mL mark, which is 1.25 mL higher than the initial 1 mL mark.Make sure to read the bottom of the meniscus while measuring the volume. The bottom of the meniscus represents the accurate volume measurement.

Learn more about Measuring Volume here:

https://brainly.com/question/1814591

#SPJ3


Write down the negation of each statement

1. ∃y ∈Z such that ∀x ∈Z, R (x + y)

2. ∀x ∈Z, ∃y∈Z such that R(x + y)

Answers

Answer:

1. ∀ y ∈ Z such that ∃ x ∈ Z, ¬R (x + y)

2. ∃ x ∈ Z, ∀ y ∈ Z such that ¬R(x + y)

Step-by-step explanation:

If we negate a quantified statement, first we negate all the quantifiers in the statement from left to right, ( keeping the same order ) then we negative the statement,

Here, the given statement,

1. ∃y ∈Z such that ∀x ∈Z, R (x + y)

By the above definition,

Negation of this statement is ∀ y ∈ Z such that ∃ x ∈ Z, ¬R (x + y),

2. Similarly,

The negation of statement ∀x ∈Z, ∃y∈Z such that R(x + y),

∃ x ∈ Z, ∀ y ∈ Z such that ¬R(x + y)

Final answer:

The negation of a mathematical statement involving existential and universal quantifiers involves switching the quantifiers and negating the inner statement. An example of a statement and its negation is 'All swans are white' and its negation 'Not all swans are white.' The law of noncontradiction implies the law of the excluded middle by rejecting the possibility of a middle ground.

Explanation:

When negating mathematical statements involving existential and universal quantifiers, the negation of an existential quantifier ∃ (there exists) becomes a universal quantifier ∀ (for all), and vice versa. Additionally, the statement inside the quantifiers gets negated. Here is the negation of each statement:

1. The original statement is ∃y ∈Z such that ∀x ∈Z, R(x + y). The negation becomes ∀y ∈Z, ∃x ∈Z such that ¬R(x + y).

2. The original statement is ∀x ∈Z, ∃y∈Z such that R(x + y). The negation becomes ∃x ∈Z, ∀y∈Z such that ¬R(x + y).

For an example of a statement and its negation: "All swans are white" is a universal affirmative statement, which can be negated to "Not all swans are white," or equivalently "There exists at least one swan that is not white."

The law of noncontradiction states that a statement and its negation cannot both be true simultaneously. The law of the excluded middle asserts that for any proposition, either the proposition is true, or its negation is true. The law of noncontradiction logically implies the law of the excluded middle, as if a statement and its negation can't both be true, then one of them must be true, rejecting the possibility of a middle ground.

Formulate the situation as a system of two linear equations in two variables. Be sure to state clearly the meaning of your x- and y-variables. Solve the system by the elimination method. Be sure to state your final answer in terms of the original question. The concession stand at an ice hockey rink had receipts of $6200 from selling a total of 2600 sodas and hot dogs. If each soda sold for $2 and each hot dog sold for $3, how many of each were sold? sodas y = hot dogs x =

Answers

Answer: 1000 hot dogs and and 1600 sodas were sold.

Step-by-step explanation:

Let x be the number of hot dogs and y be the number of sodas.

Given : The concession stand at an ice hockey rink had receipts of $6200 from selling a total of 2600 sodas and hot dogs.

Each soda sold for $2 and each hot dog sold for $3 .

Then, we have the following system of two linear equations:-

[tex]x+y=2600-----------(1)\\\\3x+2y=6200-----------(2)[/tex]

Multiplying 2 on both sides of (1), we get

[tex]2x+2y=5200------------(3)[/tex]

Now, Eliminate equation (3) from equation (2), we get

[tex]x=1000[/tex]

Put x=1000 in (1), we get

[tex]1000+y=2600\\\\\Rightarrow\ y=2600-1000=1600[/tex]

Hence, 1000 hot dogs and and 1600 sodas were sold.

Other Questions
A good-quality measuring tape can be off by 0.49 cm over a distance of 23 m. What is the percent uncertainty?33% Part (a) If 44 3 beats are counted (in exactly 30 s) what is the percent uncertainty in the measurement of their heartbeats per minute? Many of the color varieties of summer squash are determined by several interacting loci: AA or Aa gives white, aaBB or aaBb gives yellow, and aabb produces green. Crosses among heterozygotes give a 12:3:1 ratio. What type of gene interaction would account for these results? A set of bivariate data was used to create a least squares regression line. Which of the following is minimized by the line A) the sum of the residuals B) the sum of the squared residualsC) the sum of the absolute value of the residuals D) the influence of outliers E) the slope In pea plants, yellow seed color is completely dominant to green seed color.A pure yellow-seeded plant is crossed with a pure green-seeded plant. What alleles will be present in the body cells of the offspring? Please help me, need answer asap You have $200 on a savings account and$100 in a checking account each week you add $50 to your savings account and $30 to your checking account Write an expression in simplest form that represents the total amount of money in both accounts after w weeks Compare the integers -13 and 15 word choices : lbumaudienciaboletoscantanteconciertodiscos compactos divertirespectculogrupo musicaltaquillaGUILLERMO No puedo creer que vayamos al (1) _________ de Clandestinos. Es mi (2) ________ favorito.CARMEN A m me encanta Fernando Garca, el (3) _________. Tienes su ltimo (4) _________?GUILLERMO Qu pregunta! Tengo todos sus (5) ___________. Carmen, gracias por comprar los (6) __________ por Internet, comprarlos en la (7) __________ hubiera sido (would have been) imposible.CARMEN De nada. Nos vamos a (8) ______ mucho. Los conciertos de Clandestinos son un verdadero (real) (9) ___________.GUILLERMO S, ellos saben muy bien cmo entretener a su (10) ___________-. QUESTION 3HCl is the formula for _____.A)the hydronium ionB)hydrochloric acidC)hydrogen peroxideD)sodium hydroxide Light travels at a speed of close to 3 x 10^5 km/s in vacuum. Given that it takes light 8 min and 19 s to travel the distance from the center of the Earth to the center of the Sun, how far away is the Sun from the Earth? (Astronomers use this as a "distance unit" called 1 Astronomical Unit or 1 au) Marx viewed the relationship between the capitalists and the exploited workers insystemic terms; that is, he believed that a system of ________ relationships maintained the power and dominance of the owners over the workers.A. economicB. socialC. politicalD. economic, social, and political The physical arrangement of network equipment and cables is known as a network_________ The "Father of Mass Production" was:Eli WhitneyFrances C. LowellJames WattSamuel Slater What is the difference between qualitative and quantitative data? Choose the correct answer below. A. Qualitative data are measurements whose scale is inherently categorical. Quantitative data are measurements whose values are inherently numerical. B. Qualitative data are measurements that result from surveys. Quantitative data are measurements that result from experiments. C. Qualitative data are measurements whose values are inherently numerical. Quantitative data are measurements whose scale is inherently categorical. D. Qualitative data are measurements that result from experiments. Quantitative data are measurements that result from surveys. Using your knowledge of the Latin root nomen, you can guess that planetary nomenclature is a system of giving new planetsA. descriptions.B. names.C. importance.D. colors. Can someone please help me with these questions thank you2-51Plot triangle ABC with vertices A(0,0), B(3,4), and C(3,0) on graph paper. Using the origin as the point of dilation, enlarge it by 2 factors (Imagine using two rubber bands). Label this new triangle ABC. A) What are the side lengths of the original triangle, ABC?B) What are the side lengths of the enlarged, ABC?C) Calculate the area and the perimeter of ABC. The temperature of 1 m^3 of water is decreased by 10C. If this thermal energy is used to lift the water vertically against gravity, what is the change in height of the center of mass? What are the four factors that determine a population's growth rate?a. Birth rate, death rate, doubling time, and carrying capacityb. Birth rate, death rate, doubling time, and compoundingc. Birth rate, death rate, carrying capacity and emigration rated. Birth rate, death rate, immigration rate, and emigration ratee. Birth rate, death rate, compounding, and immigration rate You are asked to build a digital logic circuit for a security alarm system. The system has four Motion Sensors which indicate the presence of an intruder. Each individual motion sensor should be able to trigger an alarm. The system should be completely disabled via a Master Switch. In addition, the siren, the lights and the automated call to the security company should have separate enable switches. The inputs and outputs are specified as follows:Inputs:S1, S2, S3, S4 : Motion Sensors (0 = no intrusion detected, 1 = intrusion detected)M : Master Switch (0 = security system disabled, 1 = security system enabled)A : Siren Enable Switch (0 = siren disabled, 1 = siren enabled)L : Light Enable Switch (0 = flashing light disabled, 1 = flashing light enabled)P : Phone Call Enable Switch (0 = call disabled, 1 = call enabled)Outputs:B : Buzzing SirenF : Flashing LightC : Call BoxDraw the logic circuit diagram of the digital logic using multi-input AND/OR/NOT gates. Steroid hormones are stored and then released in large quantities into the blood. Sperm is stored and matures in the epididymis. a. Trueb. False