a box is sliding across the floor from left to right. which diagram correctly shows the force of fiction acting on the box?

The lava flowed through low-lying valleys and over the smaller Cascade Mountain Range. As it reached the ocean shore, it sank down into the soft sediments, cooling and hardening into thick black basalt.

Hope I Helped

Focal distance of an ellipse is given by the formula

[tex]f = ae[/tex]

here a = length of semi major axis

e = eccentricity of the path

now here we know that

length of major axis for the path of planet is given as 32 units

so here we can say

[tex]2a = 32 units[/tex]

[tex]a = 16 units[/tex]

so length of semi major axis is 16 units

focal distance for the planet path is given as 8 units

now from the above formula we can write

[tex]f = a*e[/tex]

[tex]8 = 16*e[/tex]

[tex]e = \frac{8}{16}[/tex]

[tex]e = \frac{1}{2} = 0.5[/tex]

so eccentricity for the path of planet will be 0.5

kinetic energy is what causes objects to move, and the absence of kinetic energy causes energy to stay still. It is also important to remember that energy is neither created or destroyed, and is constantly being reused.

m = mass of the bullet = 10 g = 10 x 10⁻³ kg = 0.01 kg       (since 1 g = 10⁻³ kg)

M = mass of pendulum = 2 kg

h = height to which pendulum rises = 12 cm = 0.12 m

V = velocity of the pendulum-bullet combination after collision = ?

Using conservation of energy

kinetic energy of the combination just after collision = Potential energy gained due to raise in height of the center of mass

(0.5) (m + M) V² = (m + M) gh

V = sqrt(2gh)

inserting the values

V = sqrt(2 x 9.8 x 0.12)

V = 1.5 m/s

v = velocity of the bullet before the collision

using conservation of momentum

momentum of bullet before collision = momentum of bullet-pendulum combination after collision

m v = (m + M) V

(0.01) v = (0.01 + 2) (1.5)

v = 301.5 m/s

hence initial speed of the bullet is 301.5 m/s

The initial speed of the bullet is calculated using the conservation of momentum and conservation of mechanical energy by equating the kinetic energy after collision with the potential energy at the pendulum's highest point and then using the momentum conservation to get the bullet's initial velocity.

To calculate the bullet's initial speed when it strikes a ballistic pendulum, we can use the principles of conservation of momentum and conservation of mechanical energy. First, we find the velocity of the bullet-pendulum system just after the collision using energy considerations. Since the bullet becomes embedded in the pendulum, this is an inelastic collision, and mechanical energy is not conserved during the collision. However, the system's mechanical energy is conserved as it swings upwards to its highest point.

As the pendulum rises to a height of 12 cm, all the kinetic energy of the system is converted into potential energy. The potential energy (PE) gained by the pendulum can be calculated using PE = mgh, where m is the total mass of the system (bullet plus pendulum), g is the acceleration due to gravity (9.81 m/s2), and h is the height (12 cm or 0.12 m). The kinetic energy (KE) just after the collision can be equated to this PE.

The total mass m after the bullet is embedded in the pendulum is (10 g + 2000 g). To find the velocity of the system after the collision, we can use the equation KE = 1/2 m v2 and solve for v. Then, by using the conservation of momentum, the initial velocity of the bullet u can be determined, since momentum before collision (bullet's momentum) is equal to the momentum after collision (system's momentum). The bullet's initial speed is found through the equation mu = (m + M)v, where M is the mass of the pendulum.

https://brainly.com/question/35573030

#SPJ3

If Voq doubles, abN gets multiplied by 16 .

If Voq=3, abN=81 .

If the value of VOq doubles, the magnitude of the restoring force doubles.

The formula for the restoring force of an abductin pad is:

F = k * x

where:

F is the restoring force

k is the spring constant

x is the distance the spring is compressed or stretched

In this case, we are told that VOq doubles. VOq is the spring constant. So, if VOq doubles, k doubles. This means that the restoring force doubles.

The restoring force is the force that pushes the shell open when the muscles relax. If the restoring force doubles, the shell will be pushed open with twice the force. This means that the shell will open more quickly and easily.

To learn more about restoring force, here

https://brainly.com/question/30720664

#SPJ2

D. Gravitational force.

Answer:

Gravitational force

Explanation:

When ball is placed on the slope and slightly disturbed then ball will roll down the slope with increasing speed.

This increasing speed or acceleration of ball is due to the component of weight of ball which is along the inclined plane.

As shown in the FBD the component of weight perpendicular to inclined plane is used to counterbalance the normal force while other component of weight parallel to the inclined plane is accelerating the ball down the plane

So here we can write

[tex]mgsin\theta = ma[/tex]

so here

[tex]a = gsin\theta[/tex]

so ball is accelerating due to gravitational force

Average velocity differs from average speed in that it considers displacement over elapsed time and has direction, while average speed is total distance over time without direction.

Average velocity is different than average speed because calculating average velocity involves taking into consideration not just the total distance traveled but the displacement (the change in position) of an object, and it is a vector quantity which means it has both magnitude and direction. On the other hand, average speed is simply the total distance traveled divided by the elapsed time and is a scalar quantity, which means it does not have a direction associated with it.

For example, if you were to drive to a store, then turn around and drive back home, making the starting and ending points the same, your displacement would be zero, therefore your average velocity would be zero. However, your average speed would be the total distance for the trip divided by the time taken to travel that distance. This illustrates that average speed can be greater than the magnitude of average velocity due to changes in direction.

To calculate average speed, one would use the formula: total distance traveled ÷ elapsed time. Meanwhile, average velocity is calculated using the formula: displacement ÷ travel time. Therefore, if you are only interested in how fast you are going regardless of the direction, you would look at average speed. But if you need to know your speed in a particular direction, you would consider average velocity.

Answer:

Battery

Explanation:

A battery has the most potential energy, due to its chemical potential energy.

The question is unclear regarding the boat's velocity. Is it 20 m/s south relative to the water, or relative to the earth? (It is a river, after all...)

There's also the possibility that the boat's velocity relative to the river is 0. Take the south direction to be negative and north to be positive, and denote by [tex]v_{A/B}[/tex] the velocity of a body A relative to a body B. Under these conditions,

[tex]v_{B/E}=v_{B/W}+v_{W/E}\iff-20\,\dfrac{\mathrm m}{\mathrm s}=0+-20\,\dfrac{\mathrm m}{\mathrm s}[/tex]

(B for boat, E for earth, W for water) so that the passenger's velocity relative to the earth is

[tex]v_{P/E}=v_{P/B}+v_{B/W}+v_{W/E}[/tex]

(P for passenger)

[tex]v_{P/E}=10\,\dfrac{\mathrm m}{\mathrm s}+0-20\,\dfrac{\mathrm m}{\mathrm s}=-10\,\dfrac{\mathrm m}{\mathrm s}[/tex]

or 10 m/s south.

Answer: C) velocity is a vector and requires a direction.

Explanation:

In physics, there are two types of quantities:

- scalars: these are quantities that have only a magnitude

- vectors: there are quantities that have both magnitude and direction

As an example, speed is a scalar while velocity is a vector. Therefore, speed has only a magnitude, while velocity has both magnitude and direction: therefore, the difference between the two quantities is that velocity is a vector and requires a direction, as stated in option C.

Answer:

velocity is a vector and requires a direction.

Explanation:

Speed is defined as the total distance covered per unit time and the velocity is defined as the total displacement per unit time.

Speed is a scalar quantity and velocity is a vector quantity. The quantities that have both magnitude and direction are vector quantity and the quantity that have only magnitude are scalar quantity.The SI unit of both velocity and speed is m/s.

So, the correct option is (c) "  velocity is a vector and requires a direction ".

Mass x SH x °C (or K) ΔT

= 75g x 0.45J/g/K x 6.0 ΔT

= 202.5 Joules of heat absorbed.

(202.5J / 4.184J/cal = 48.4 calories).

I guess that is the answer

The amount of heat would be absorbed by 75.20 g of iron when from 22°C to 28°C is equal to 8834.5 J.

Specific heat capacity for any substance is the amount of heat energy required to raise the temperature by 1°C of a unit mass of that substance. The mathematically Specific heat capacity can be expressed as:

Q= m C ΔT

where Q is the amount of heat energy, ΔT is the change in temperature, and C is the specific heat capacity of the system.

Specific heat capacity is an intensive property as it is independent of the size or quantity of the matter.

Given, the Specific heat capacity of the iron, C = 0.44 J/gK

The mass of the iron, m = 75.20 g

The change in the temperature = ΔT = 28 - 22 = 6°C = 273-6 = 267 K

The heat absorbed by iron, Q = mCΔT = 75.20 × 0.44 × 267

Q = 8834.5 J

Therefore, the heat would be absorbed by 75.20 g of iron is 8834.5 Joules.

Learn more about Specific heat capacity, here:

https://brainly.com/question/28302909

#SPJ2

Resistance of our body is given as

[tex]R = 30,000 ohm[/tex]

voltage applied across the body is

[tex]V = 120 V[/tex]

now by ohm's law current pass through our body is given by

[tex]i = \frac{V}{R}[/tex]

[tex]i = \frac{120}{30,000}[\tex]

[tex]i = 4 * 10^{-3} A[/tex]

So current from our body will be 4 * 10^-3 A

Answer:

It take the bullet 0.64 seconds to hit the ground.

Explanation;

 We have equation of motion , [tex]s= ut+\frac{1}{2} at^2[/tex], s is the displacement, u is the initial velocity, a is the acceleration and t is the time.

Here we need to consider only vertical motion of bullet.

Initial velocity = 0 m/s, Displacement = 1.98 m, acceleration = acceleration due to gravity = [tex]9.8m/s^2[/tex], we need to find time taken

Substituting

   [tex]1.98= 0*t+\frac{1}{2} *9.8*t^2\\ \\ 4.9t^2=1.98\\ \\ t^2=0.404\\ \\ t=0.64 seconds[/tex]

   It take the bullet 0.64 seconds to hit the ground.

If his velocity is constant, then there is zero net force on him . . . any force acting on him is exactly canceled by an equal force in the opposite direction.

In the case of a sky-diver, the force of gravity on him (his weight, downward) is exactly canceled by the force of air resistance upward.

The net force on him is zero.  If the net force on him were not zero, then his velocity  wouldn't be constant. He would be accelerated in the direction of the net force.

here in this type of collision we can use momentum conservation

[tex]P_{1i} + P_{2i} = P_{1f} + P_{2f}[/tex]

here we know that

[tex]m_1 = 122 kg[/tex]

[tex]v_{1i} = 13 m/s[/tex]

[tex]v_{2i} = -17 m/s[/tex]

[tex]v_{1f} = v_{2f} = - 3.5 m/s[/tex]

now by above equation of momentum conservation

[tex]122* 13 + m_2*(-17) = 122*(-3.5) + m_2*(-3.5)[/tex]

[tex]1586  - 17*m_2 = - 427 - 3.5* m_2[/tex]

[tex]1586 + 427 = (17 - 3.5)*m_2[/tex]

[tex]2013 = 13.5*m_2[/tex]

[tex]m_2 = \frac{2013}{13.5}[/tex]

[tex]m_2 = 149 kg[/tex]

so mass of the player 2 will be approx 149 kg

Answer: The correct option is 3.5m/s.

Explanation: In the question, conservation of energy is taking place which means that the energy is getting transferred from one form to another form.

Here, elastic potential energy of the spring is getting converted to the kinetic energy of the block.

Mathematically,

[tex]\frac{1}{2}kx^2=\frac{1}{2}mv^2[/tex]

where, k = spring constant = 56N/m

x = compression of extension of spring = 0.75m

m = Mass of the block = 2.5kg

v = velocity of the block = ? m/s

Putting values in above equation, we get:

[tex]\frac{1}{2}\times 56\times (0.75)^2=\frac{1}{2}\times 2.5\times v^2\\\\v=3.54m/s[/tex]

Hence, the block will move at a speed of 3.5m/s

The velocity of the block after the spring is released is approximately 13 m/s.

To find the velocity of the block after the spring is released, we can use the principle of conservation of mechanical energy. The potential energy stored in the spring will be converted into the kinetic energy of the block as it moves.

The potential energy (U) stored in a spring is given by the equation:

[tex]\[ U = \frac{1}{2} k x^2 \][/tex]

where k is the spring constant and x is the compression of the spring.

 For this problem:

[tex]\[ k = 56 \, \text{N/m} \][/tex]

[tex]\[ x = 0.75 \, \text{m} \][/tex]

So the potential energy stored in the spring is:

[tex]\[ U = \frac{1}{2} (56 \, \text{N/m}) (0.75 \, \text{m})^2 \][/tex]

[tex]\[ U = \frac{1}{2} (56 \, \text{N/m}) (0.5625 \, \text{m}^2) \][/tex]

[tex]\[ U = 15.4 \, \text{J} \][/tex]

This potential energy will be converted into the kinetic energy (K) of the block, which is given by:

[tex]\[ K = \frac{1}{2} m v^2 \][/tex]

where m  is the mass of the block and  v  is its velocity.

The mass of the block m is 2.5 kg, so we have:

[tex]\[ \frac{1}{2} m v^2 = U \][/tex]

[tex]\[ \frac{1}{2} (2.5 \, \text{kg}) v^2 = 15.4 \, \text{J} \][/tex]

[tex]\[ (1.25 \, \text{kg}) v^2 = 15.4 \, \text{J} \][/tex]

[tex]\[ v^2 = \frac{15.4 \, \text{J}}{1.25 \, \text{kg}} \][/tex]

[tex]\[ v^2 = 12.32 \, \text{m}^2/\text{s}^2 \][/tex]

[tex]\[ v = \sqrt{12.32 \, \text{m}^2/\text{s}^2} \][/tex]

[tex]\[ v \ = 13 \, \text{m/s} \][/tex]

That is true, i think.

Answer:

True

Explanation:

The atomic emission spectra of a sodium atom on earth and of a sodium atom in the sun would be the same.

When atoms of sodium get excited they move to a higher level and when they move back to the ground level, they emit photons.

Thus the emitted energy of photon depends only on the atom of the sodium (element) and is independent of the atmosphere where it is .Since we are comparing the emission spectra of the same element sodium it is the same on both earth and sun.

Answer:

There is an arrow up for the air resistance and an arrow down for gravity. The arrow up is shorter than the arrow down.

Explanation:

So in the free-body diagram you have to draw all the forces that are acting over some body.

In this case when the skydiver is falling down there are only 2 forces acting on him, the gravitational force and the air resistance, therefore in the free-body diagram should be 2 arrows, now we have to determinate the direction of this arrows, so like the gravitational force is pulling the skydiver down (towards to earth) the arrow for this one should be down, and for the air resistance as it's trying to stop skydiver's fall it's direction it's upwards. now for the length of the arrows we have to look in which direction is the skydiver speeding up, in the question it says that the skydiver is speeding up down so the bigger arrow should be downwards too.

length of the vector is proportional to the magnitude of the vector

so length of vector will be in the proportional to the magnitude of the vector here

initial length of the vector is 3 cm which represent the velocity vector as 100 m/s

now it means 3 cm length is proportional to speed which is 100 m/s

now if we draw another vector of length 6 cm then here we can see that if length of vector is doubled then initial length

so here the magnitude of velocity will also be doubled

so here final speed must be double of initial speed

[tex]v_f = 2* v_i[/tex]

[tex]v_f = 2*100 = 200 m/s[/tex]

If we assume the acceleration that the sled undergoes is constant throughout its motion, then we have the average velocity [tex]\bar v[/tex] of the sled to be

[tex]\bar v=\dfrac{v_i+v_f}2=\dfrac{\Delta x}{23\,\mathrm s}[/tex]

where [tex]\Delta x[/tex] is the total displacement of the sled, and [tex]v_i[/tex] and [tex]v_f[/tex] are the sled's initial and final velocities, respectively. The sled eventually stops, so we take [tex]v_f=0[/tex] and solve for [tex]v_i[/tex]:

[tex]\dfrac{v_i}2=\dfrac{15\,\mathrm m}{23\,\mathrm s}\implies v_i=1.3\,\dfrac{\mathrm m}{\mathrm s}[/tex]

Now, take the sled's starting position to be the origin. The sled moves in one direction, which we take to be the positive direction. Then because it's slowing down, we expect its acceleration to be in the negative direction (and hence with negative sign). In particular, the sled's position [tex]x[/tex] at time [tex]t[/tex] is

[tex]x=x_i+v_it+\dfrac12at^2[/tex]

We have [tex]\Delta x=x-x_i=15\,\mathrm m[/tex], [tex]v_i=1.3\,\frac{\mathrm m}{\mathrm s}[/tex], and [tex]t=23\,\mathrm s[/tex], so we can solve for acceleration [tex]a[/tex]:

[tex]15\,\mathrm m=\left(1.3\,\dfrac{\mathrm m}{\mathrm s}\right)(23\,\mathrm s)+\dfrac12a(23\,\mathrm s)^2[/tex]

[tex]\implies a=-0.056\,\dfrac{\mathrm m}{\mathrm s^2}[/tex]

With a mass of [tex]m=52.5\,\mathrm{kg}[/tex], we find that the stopping force is

[tex]F=ma=-2.9\,\mathrm N[/tex]

which means the stopping force has magnitude [tex]2.4\,\mathrm N[/tex] in the negative direction (opposite the direction of the sled's initial velocity).

the answer is c another magnet can be attracted or repelled because they have north and south sides

Answer: Option (C) is the correct answer.

Explanation:

A magnet will only be attracted by another magnet as each magnet contains opposite poles. These poles are north pole and south pole.

Hence, like poles are repel each other whereas opposite poles are attracted towards each other.

Therefore, when a magnet comes in contact with a copper wire then there will be attraction between them.

On the other hand, if south pole of a magnet comes in contact with the north pole of another magnet then a force of attraction will occur between them.

Due to this both the magnets get attracted towards each other. But when south pole of a magnet comes in contact with the south pole of another magnet then force of repulsion will occur.

Thus, we can conclude that another magnet will be attracted to or repelled by a magnet.

Given:

Time taken: 3.5 hrs

Speed: 120mi/HR

Now we know that

distance = speed x time

Substituting the given values in the above formula we get

Distance= 120mi/hr x 3 hrs

Distance = 360 mi= 579.36 Km

The speed is the distance covered by an object at a particular time. The distance between the Platform 9 and Hogwarts is 360 miles.

The speed is the distance covered by an object at a particular time. Therefore, it is the ratio of distance and time.

Speed = Distance Covered / Time taken

Given that it takes 3.5 hours for the Hogwarts Express, moving at a speed of 120 mi/hr, to make it from Platform 9 to Hogwarts. Therefore, we can write the given quantities as,

Speed of the Hogwarts Express = 120 miles per hour

Time taken = 3 hours

Now, the distance between the Platform 9 and Hogwarts can be written as,

Speed = Distance / Time

120 miles per hour = Distance / 3 hours

Distance = 120 miles per hour × 3 hours

Distance = 360 miles

Hence, the distance between the Platform 9 and Hogwarts is 360 miles.

Learn more about Speed here:

https://brainly.com/question/15100898

#SPJ2

The blank should be filled with the word 'technicians,' reflecting the need for specialized workers who possess practical technical skills to maintain and repair equipment as technology evolves.

Maintenance technicians are needed in great numbers to service all sorts of technical equipment. Technicians are those individuals who have the practical and technical knowledge to build, operate, maintain, and repair various kinds of equipment and machinery. This demand for technicians is a reflection of the growing complexity and proliferation of technology in contemporary society. As new technologies emerge, they often require different skills than those needed for older technologies, creating a need for continuous training and updating of skills among workers.

Moreover, significant infrastructure projects, such as the expansion of electrical transmission systems, will necessitate an increase in specialized workers, including technicians, to maintain and repair these systems efficiently. Preventive maintenance schedules and activities further highlight the essential role that technicians play in ensuring the smooth operation of various systems and equipment in industries as diverse as manufacturing, transportation, and housing.

1 h 13 min and 50 s it will take.

To answer this question, we must use the equation for the volumetric expansion of gases at constant pressure. This equation is given by:

[tex]V=V_{0}(1 + \alpha(T_{2}-T_{1}))[/tex]

We know:

[tex]V_{0}[/tex] is the initial volume [tex]= 0.5 m ^ 3[/tex]

ΔT is the temperature change = 45 ° -20 ° = 25 °

[tex]\alpha[/tex] is the coefficient of gas expansion and is equal to 1/273

Then the final volume of the gas is:

[tex]V=0.5*(1+\frac{1}{273}*25)[/tex]

[tex]V=0.546m^ 3[/tex]

Work done on the crate is given by

[tex]W = Fd cos\theta[/tex]

here we have

[tex]F = 142 N[/tex]

[tex]d = 6.1 m[/tex]

[tex]\theta = 37 degree[/tex]

now we have

[tex]W = Fdcos37[/tex]

[tex]W = 142 * 6.1 * cos37[/tex]

[tex]W = 691.8 J[/tex]

So it require 691.8 J work to slide the block across horizontal floor

A scalar quantity is one in which there is no direction given.

30 Lbs would be the answer, since there is no indicator of direction.

Before coming into a conclusion, first we have to understand Einstein's mass energy equivalence theory.

As per this theory ,mass and energy are inter convertible.This theory is mathematically written as-

E=mc^2. Where m is the mass and c is the velocity.

So, when some amount of mass is lost, equivalent amount of energy is produced as per this theory.

As per law of conservation of energy, the total energy of the universe is always constant.Energy is neither created nor destroyed.It only changes from one form to another.

In case of sun,the energy is produced due to fusion reaction.In this type of reaction there will be mass defect .Due to this loss of mass, equivalent amount of energy is produced which comes into earth in the form of radiations.

Here the law of conservation of energy is not violated .Before the fusion reaction,the energy was trapped inside the atoms .When the reaction was initiated, correspondingly same amount of energy is produced due to mass defect ,but the total energy is always constant.

Hence,it is also in accordance with the law of conservation of energy.

Hence,the correct answer to the question is D i.e all the energy that reaches Earth from the Sun was originally contained within the Sun’s atoms.