A box that has a mass of 80 kg slides down a ramp with a 30 degree angle. The free-body diagram shows the forces acting on the box.Ignoring friction and air resistance, what is the acceleration of the box, to the nearest tenth?

Answer:

The correct answer is "wave B has a lower frequency."

Explanation:

The Doppler effect is defined as the change in apparent frequency of a wave produced by the relative movement of the source with respect to its observer. In other words, this effect is the change in the perceived frequency of any wave movement when the sender and the receiver, or observer, move relative to each other.

This is the effect that occurs in this case. And it is explained as follows: When the ambulance approaches the observer, the wave "compresses", that is, the wavelength is short, the frequency high and, therefore, the tone of the perceived sound will be sharp. On the other hand, when the ambulance moves away from the observer, the wave "decompresses", that is, the wavelength is long and the frequency low.

Then the correct answer is "wave B has a lower frequency."

the correct answer is the letter A)1 to 1

The nuclei of atoms that are the most stable have proton to neutron ratios of 1:1. Thus, the correct option for this question is A.

The nucleus of an atom may be defined as the center of any atom that significantly consists of protons and neutrons. Due to the positive charge on protons and neutral charge on neutrons, the nucleus of an atom is found to be positively charged.

In the structure of any atom, the number of protons and neutrons in the nucleus of an atom remains equal most of the time.

But when it comes to isotopes, when atoms of different elements have the same atomic number but different mass number, the number of neutrons significantly changes.

Therefore, the nuclei of atoms that are the most stable have proton to neutron ratios of 1:1. Thus, the correct option for this question is A.

To learn more about Sub-atomic particles, refer to the link:

https://brainly.com/question/5974633

#SPJ2

Answer: 3.2

Explanation:

pH is the measure of acidity or alkalinity of a solution.

pH is calculated by taking negative logarithm of hydrogen ion concentration.

[tex]pH=-\log [H_3O^+][/tex]

[tex]pH=log\frac {1}{H_3O^+}[/tex]

Thus as pH and [tex]H^+[/tex] are inversely related, a solution having lower pH will have more amount of [tex]H^+[/tex] concentration. And a solution having more pH will have less amount of [tex]H^+[/tex] concentration.

Thus the solution with lowest pH of 3.2 will have highest hydronium ion concentration.

Final answer:

To find the two sets of consecutive integers that satisfy the given property, we can set up and solve an equation. The equation is (x+1)(x+2) = 7x - 1. Solving this equation, we find two possible values for x: 1 and 3. Substituting these values, we find the two sets: {1, 2, 3} and {3, 4, 5}.

Explanation:

To find the two sets of consecutive integers, let's assign variables to the smallest integer in each set. Let's say the first set starts with x, so the consecutive integers in that set would be x, x+1, and x+2. Similarly, let's say the second set starts with y, so the consecutive integers in that set would be y, y+1, and y+2.

According to the given property, the product of the larger two integers (in this case, (x+1)(x+2)) is one less than seven times the smallest integer (in this case, 7x-1).

We can now form an equation: (x+1)(x+2) = 7x - 1.

To solve this equation, we can expand the left side and then simplify:

x^2 + 3x + 2 = 7x - 1

x^2 - 4x + 3 = 0

Now, we can factor the quadratic equation:

(x - 1)(x - 3) = 0

So the possible values for x are 1 and 3. Substituting these values back into the original equations, we can find the two sets of consecutive integers:

For x = 1, the integers are 1, 2, 3. And for x = 3, the integers are 3, 4, 5.

Therefore, the two sets of consecutive integers that satisfy the given property are {1, 2, 3} and {3, 4, 5}.

Answer:

the correct answer is "c"

Explanation:

i took the test on usatestprep the answer is c (The particles will experience a repulsive force that will drive them apart along the line joining their centers.)

No, actually the answer is atoms.

Explain:

Bioaccumulation is the process by which toxins enter the food web by building up in individual organisms.

Answer:

Explanation:

Answer:

Option (A)

Explanation:

The asteroids are the rocky materials that are present abundantly in space. They are found primarily in the asteroid belt where there are millions of asteroids and frequent collision takes place in this belt. These asteroids revolves around the sun. These asteroids are of various sizes, ranging from small pieces into large mass that can cause tremendous effect to earth. These asteroids are the left overs of the early solar system, which got scattered in space soon after the formation of the universe.

Thus, the correct answer is option (A).

The net force on each charge due to the other two can be calculated using Coulomb's Law. The net force on the +75μC charge is 0.263 N in the positive x-direction, and the net force on the -85μC charge is -0.263 N in the negative x-direction.

To calculate the net force on each charge due to the other two, we can use the formula for the electric force between two charges: F = k x q1 x q2 / r2, where F is the net force, k is the Coulomb's constant (9 x 109 N m2/C2), q1 and q2 are the charges, and r is the distance between the charges.

Let's calculate the net force on the +75μC charge due to the +48μC and -85μC charges. The distance between the +75μC charge and the +48μC charge is 0.35 m. Substituting these values into the formula, we get F1 = (9 x 109 N m2/C2) x (75 x 10-6 C) x (48 x 10-6 C) / (0.35 m)2 = 0.263 N.

The net force on the -85μC charge due to the +75μC and +48μC charges is the same as the net force on the +75μC charge, but in the opposite direction, giving us: F2 = -0.263 N.

Therefore, the net force on the +75μC charge is 0.263 N in the positive x-direction, and the net force on the -85μC charge is -0.263 N in the negative x-direction.

https://brainly.com/question/20935307

#SPJ12

The source of all magnetism is fundamentally from moving electric charges, which in more complex and observable form, manifests as atomic dipoles aligned into domains in ferromagnetic materials, such as iron.

The source of all magnetism lies within moving electric charges, which is in option D. This is primarily seen in the form of electrons in atomic orbits. However, the more complex and commonly observed form of magnetism comes from atoms in ferromagnetic materials like iron, which forms domains of aligned atoms, or option B. These domains act like tiny bar magnets and are rigidly aligned in the same direction due to strong coupling effects, giving each domain a net dipole moment. When these domains align under an external magnetic field, we observe what we commonly perceive as magnetism.

Though iron and other ferromagnetic materials like nickel are often associated with magnets, they are not the source of magnetism, but rather mediums that exhibit magnetic properties when their atomic dipoles are aligned in domains. The real source is the moving electrical charges within the atoms of these materials, specifically their electrons.

So to summarize, the source of magnetism is fundamentally from moving electric charges. However, this source manifests in a more organized and observable form when the atoms of ferromagnetic materials form domains of aligned atomic dipoles.

https://brainly.com/question/13026686

#SPJ5

The source of all magnetism is moving electric charges. Ferromagnetic materials like iron exhibit this effect, where domains of atoms with aligned magnetic fields make each atom a tiny magnet. The alignment of these domains causes magnetization.

The source of all magnetism is D. moving electric charge. This is because magnetism at its most fundamental level arises from electric currents. In ferromagnetic materials such as iron, magnetism is caused by regions called domains where the electrons' magnetic fields are aligned with each other. Within these domains, the magnetic moments of individual atoms are oriented in the same direction, with each atom acting as a tiny bar magnet. When these domains are aligned in the presence of an external magnetic field, the object becomes magnetized. The process of alignment involves domains growing and orienting themselves, which can become permanent when the material is heated and then cooled, or simply tapped in the presence of magnets.

Answer:

The Ileum connects the small intestine, and the large intestine.

Explanation:

The ileum is the last section of the small intestine. And it leads to the large intestine. The ileum mainly absorbs water, bile salts, and vitamin B12. The ileocecal valve is a one-way valve located between the ileum and the cecum, (which is the first portion of the colon.)

Answer:

1. They’re invisible - Radio waves

2. They have colors - Visible

3. They’re used to learn about dust and gas clouds. - Both

4. They can travel in a vacuum. - Both

5. They’re used to find the temperature of stars. - Visible

6. They have energy. - Both

Explanation:

The magnetic spectrum consists invisible and visible part of the spectrum. The invisible part consists of radio waves. These are waves used for radios, tvs, and cellphone communications. They satisfy all the properties of transverse waves.

The visible part comes from light. This is the part that is visible to the naked eye. Examples are ultraviolet rays, the sun, neon lights etc. To determine how hot something is, the visible portion is used. The brighter the object, the hotter it is.  Thus, the brightness of the stars can be determined by the color of the light emitted. The visible rays satisfy all the properties of transverse waves. However, light is considered a dual nature - it has wave and electron-like properties.

The difference between the positions of these two poles when viewed at different locations is defined as the magnetic declination which allows these angles for navigators to determine their true geographic position.

Magnetic declination is also known as magnetic variation. It is the angle on the horizontal plane between magnetic north and true north which varies depending on the position on the Earth's surface and changes over time.

Declination is positive when the angle is east of true north and negative when it is west. It changes over time and with place.

Magnetic declination is caused by the complex shape of the Earth's magnetic field which defines to the use of a compass with its needle pointing north for navigation.

Thus, the difference between the positions of these two poles when viewed at different locations is defined as the magnetic declination which allows these angles for navigators to determine their true geographic position.

Learn more about Magnetic Declination, here:

https://brainly.com/question/14071370

#SPJ3

Answer: i think its too late for answer but thx for points really needed

Answer:

A/ Elastic potential energy changes to gravitational potential energy

Explanation:

just took the test

Answer:

a

Explanation:

i got it right on edg

For ape x it is a 16-year-old freshman who can't decide if she wants to dress preppy or goth

A capacitor stops charging when the voltage across it equals the emf of the power source. The voltage and charge on the plates of the capacitor and the presence of an inductor play major roles in this process.

A capacitor, when connected to a power source, begins to charge up. This charging continues until the voltage across the capacitor equals the emf (electromotive force) of the power source. The reason for the capacitor stopping its charge is due to the opposing force of the charges on its own plates, as per the Kirchhoff's loop rule in physics. This rule states that the algebraic sum of potential changes around any closed loop in a circuit should be zero.

Another factor involved is Ohm's law for a capacitor. When the capacitor is fully charged, it effectively acts as a form of AC resistance, limiting the current flow. Once the capacitor is fully charged, it halts current flow, reaching its maximum voltage, which equals the voltage of the power source.

Aside from these, the inductor plays a role when a capacitor is in a circuit. The inductor resists a change in current, allowing current to flow even when the capacitor is fully charged. This creates a cycle where energy is transferred back and forth between the capacitor and the inductor.

https://brainly.com/question/29301875

#SPJ3

Specific gravity = Density of an object/Density of water

Density = Mass/Volume

For the current scenario;

Density of halite = mass/(l*w*h) = 58.75/(3.18*3.06*2.79) = 58.75/27.148932 = 2.164 g/cm^3

Density of water ≈ 1000 kg/m^3 = 1 g/cm^3

Answer:

An object that moves at constant velocity

Explanation:

For an object to be in equilibrium, according to Newton's first law, the object must maintain its state of rest or movement without a resulting force acting on the object.

In this case the object in both options is in motion, but the only one in which that movement is constant and without resulting forces is when it moves at constant speed, so it is in equilibrium.

On the other hand, when it moves with at constant acceleration, by Newton's second law [tex]F = ma[/tex] ([tex]m[/tex] is the mass and [tex]a[/tex] is acceleration), if there is an acceleration there will be a resultant force so the object is not in equilibrium.

The answer is an object that moves at constant velocity is in equilibrium.

The frequency of light with a wavelength of 725 nanometers is approximately 4.14 × 10^14 Hz, which is calculated using the formula for the relationship between the speed of light, wavelength, and frequency.

The frequency of light can be calculated using the equation c = fλ, where 'c' is the speed of light, 'f' is the frequency, and 'λ' is the wavelength. The speed of light (c) is approximately 3.00 × 108 m/s. So, if the light has a wavelength of 725 nm (or 725 × 10-9 m, to convert nanometers to meters), the equation can be rearranged to solve for frequency (f): f = c/λ.

Substituting the given values, then we get: f = (3.00 × 108 m/s) / (725 × 10-9 m) = 4.14 × 1014 Hz. Therefore, the frequency of light with a wavelength of 725 nm is approximately 4.14 × 1014 Hz.

https://brainly.com/question/10732947

#SPJ2