Answer:
Explanation:
givens
vf = 310 m/s
vi = 480 m/s
d = 0.1 m
formula
vf^2 = vi^2 + 2*a*d
Solution
310^2 (m/s)^2 = 480^2 (m/s)^2 + 2 * a * 0.1 meters
96100 = 230400 + 2*a * 0.1
96100 - 230400 = 2*a*0.1
-134300 = 2*0.1*a
-134300 = 0.2 *a
-134300/0.2 = a
a = -671500 m/s^2
The important thing to notice is that the acceleration is minus which means the bullet is slowing down.
A telephone wire has a current 20A flowing through it . How long does it take for a charge of 15 C to pass through the wire?
It will take 0.75 s for a charge of 15 C to flow through the wire.
The quantity of electricity flowing through a wire is related to current and time according to the following equation:
Q = ItWhere
Q is the quantity of electricity
I is the current
t is the time
With the above formula, we can calculate the time taken for the 15 C to flow through the wire. This can be obtained as follow:
Quantity of electricity (Q) = 15 C
Current (I) = 20 A
Time (t) =?Q = It
15 = 20 × t
Divide both side by 20
[tex]t = \frac{15}{20}\\\\[/tex]
t = 0.75 sTherefore, it will take 0.75 s for a charge of 15 C to flow through the wire.
Learn more: https://brainly.com/question/21690385
How long did it take beagle to sail from Tahiti back to Falmouth, England?
Answer:
On 2 October 1836, the Beagle entered the English port of Falmouth after a voyage which had lasted for four years, nine months and five days.
The Beagle voyage from Tahiti to Falmouth, England took five years.
The Beagle took five years to sail from Tahiti back to Falmouth, England as part of Charles Darwin's famous voyage on the HMS Beagle from 1831 to 1836.
What is the frequency of an electromagnetic wave with a wavelength of 1.0 x 10 m?
Answer: 0.03 Hz
Explanation:
The frequency [tex]f[/tex] of a light with a wavelength [tex]\lambda=1(10)^{10} m[/tex] is calculated by the following equation:
[tex]f=\frac{c}{\lambda}[/tex]
Where [tex]c=3(10)^{8}m/s[/tex] is the speed of light
Then:
[tex]f=\frac{3(10)^{8}m/s}{1(10)^{10} m}[/tex]
[tex]f=0.03 s^{-1}=0.03 Hz[/tex] This is the frequency
The net Forward force on the propeller of a 3.2 KG model airplane is 7.0 N. What is the acceleration of the airplanes
Answer:
[tex]2.1875 ms^{-2}[/tex]
Explanation:
Newton's second law: [tex]F=ma[/tex] Let's substitute and solve for whatever is left behind:[tex]7.0N= 3.2kg *a[tex]a =\frac {7.0}{3.2} \frac{N}{kg} = 2.1875 \frac{kg\frac{m}{s^2}}{kg}=2.1875 \frac{m}{s^2}[/tex]
The value of acceleration of the airplane is [tex]2.19 \;\rm m/s^{2}[/tex].
Given data:
The mass of propeller model is, m = 3.2 kg.
The net force on the propeller model is, F = 7.0 N.
Apply the Newton's second law, which says that the applied force on an object is equal to the product of mass of object and acceleration of object, caused due to applied force.
Then the expression is,
[tex]F = m \times a[/tex]
here, a is acceleration.
Solving as,
[tex]7 = 3.2 \times a\\a=2.19 \;\rm m/s^{2}[/tex]
Thus, the required value of acceleration of the propeller model is [tex]2.19 \;\rm m/s^{2}[/tex].
Learn more about the Newton's second law here:
https://brainly.com/question/13447525
If a wave has a period of 0.077 sec, it has a frequency of
01/13 Hz.
3.6 Hz.
169 Hz.
13 Hz.
Answer: 13 Hz
Explanation:
The frequency [tex]f[/tex] of a wave is expressed as:
[tex]f=\frac{1}{T}[/tex]
Where [tex]T[/tex] is the period of the wave
If we are told the period is 0.077 s, then its frequency is:
[tex]f=\frac{1}{0.077 s}[/tex]
[tex]f=12.98 Hz \approx 13 Hz[/tex]
the amount of water returning to the earth through precipitation is blank the amount of water leaving the earth through evaporation
Answer:
The amount of water entering the earth through precipitation is equal to the amount of water leaving earth through transpiration.
Explanation:
Rates of precipitation and evaporation vary widely according to regions and seasons. But in a global scale the rates are equal. Thus the total amount of earth’s water maintains its constancy even though there is a continuous change in forms of water.
Evaporation and transpiration are the forms in which Water leaves the earth and it returns to the earth in various forms of precipitation like rain, snow, dew, fog etc. This water then reaches ocean and land. The water that reaches the land flows as surface run off into rivers and water bodies or seep into the ground replenishing the ground water table.
The water cycle is a balanced system that allows water to circulate between the earth's oceans, atmosphere, and land. Water leaves the earth through evaporation/sublimation, reenters the atmosphere, condenses, and falls back to the earth through precipitation. The amount of water returning to the earth matches the amount leaving it, maintaining equilibrium.
Explanation:The water cycle, also known as the hydrological cycle, is a continuous process by which water circulates between the earth's oceans, atmosphere, and land. This cycle involves several key stages such as evaporation/sublimation, condensation/precipitation, and surface runoff/snowmelt.
Firstly, water from the land and oceans enters the atmosphere through evaporation or sublimation, where it condenses into clouds. This condensation ultimately falls back to the earth's surface as precipitation, such as rain or snow. Therefore, the amount of water returning to the earth through precipitation equals the amount of water leaving the earth through evaporation.
Once the water hits the earth, some of it may infiltrate into the soil or enter freshwater bodies. In most natural terrestrial environments, rain encounters vegetation before it reaches the soil surface. Some of this water evaporates immediately from the surfaces of plants in a process known as evapotranspiration.
After precipitation, water may travel over the surface as runoff into various bodies of water, eventually reentering the ocean, thus completing the cycle. In conclusion, the water cycle is a balanced system with the water leaving and coming back to the earth in similar quantities.
Learn more about Water Cycle here:https://brainly.com/question/31195929
#SPJ3
An elevated weighing 15,00 Newton’s is raised one story in 50 seconds. If the distance stories is 3.0 meters how much power is required of the motor
Power required for motor to raise elevated weighing 1500 newton for a distance of 3 meter in 50 second is 90 watt.
Solution:
By using power force formula,
Power is obtained by multiplying force and velocity
[tex]\text { Power }=\text { Force } \times \text { Velocity }[/tex]
Velocity can be calculated by dividing distance by time.
[tex]\begin{array}{l}{\text {Velocity}=\frac{\text {Distance}}{\text {Time}}} \\ {\text {Power}=\text {Force} \times \frac{\text {Distance}}{\text {Time}}}\end{array}[/tex]
So for a force of 1500 newton with distance 3 meter for a time period 50 second, power is given as,
[tex]\text { Power }=1500 \times \frac{3}{50}=150 \times \frac{3}{5}=30 \times 3 = 90[/tex]
Power = 90 watt
which calculation is an example of velocity ? 10m/s 10/Ms to the right 10 m to the right 10
Answer:
10m/s to the right
Answer: 10 m/s to the right
Explanation: Velocity is both speed AND Direction.
a physics student drops a rock from a 55m cliff. How long does it take to hit the ground?
Answer: 9.9 seconds
Explanation:
that's just how long it takes
To hit the ground it takes approximately 3.19 seconds for the rock to hit the ground when dropped from a 55-meter cliff.
To calculate the time it takes for the rock to hit the ground when dropped from a certain height, we can use the kinematic equation for free fall:
ℎ = 1/2 gt2
Where:
h is the height of the cliff (55 m in this case).
g is the acceleration due to gravity ( 9.8 m/s2 approximately on the surface of the Earth).
t is the time we're trying to find.
Rearranging the equation to solve for t:
t =[tex]\sqrt{ 2h / g}[/tex]
Plugging in the values:
t =[tex]\sqrt{ 2(55)m / 9.8m/s²}[/tex]
Calculating this:
t≈3.19s
So, it takes approximately 3.19 seconds for the rock to hit the ground when dropped from a 55-meter cliff.
To know more about free fall
https://brainly.com/question/12167131
#SPJ3
You place a block of wood on a table. How could you increase the pressure
the block exerts on the table?
O
A. Turn it to a larger face.
O
B. Move it to the floor.
O
C. Hold it above the table.
O
D. Turn it to a smaller face.
Answer:
i think the answer to this is D
Answer:
Turn it to a smaller face.
(D) is correct option.
Explanation:
Pressure :
Pressure is the inversely proportional to the area.
When the area of the block of face small then the pressure will be increases if the area of the block of face larger then the pressure will be reduce.
Pressure is equal to the force upon area.
In mathematically term,
[tex]P=\dfrac{F}{A}[/tex]
Where, F = force
A = area
P = pressure
Hence, Turn it to a smaller face.
3. The shorter the wavelength, the
the frequency.
greater
1 smaller
U stronger
Answer:
Shorter the wavelength, the higher the frequency of the electromagnetic wave, and greater is the energy of the waveform or the photon. Frequency is always inversely related to the wavelength.
Explanation:
it is on google
Answer:
Shorter frequency mean the sounds lower but this doesn't mean smaller the the answer is greater or stronger
Which fractures tend to occur first when a pane of glass is struck?
A. Radial fractures
B.
Concentric fractures
c. Spider web fractures
D. Impact fractures
Radial fractures tend to occur first when a pane of glass is struck.
Answer: Option A
Explanation:
There is a slight difference between radial and concentric fractures and as radial fractures are formed which extends outwards in a radial manner from the point where the glass is struck.
Whereas concentric fractures are circular in pattern and they terminate long before radial crack. Also when a bullet is fired from a gun, a similar reaction is observed as it gets struck on the surface and fractures are formed in the same pattern.
The Anwer is: A Radical Fractures
In a wet cell battery what is the electrolyte?
copper
liquid acid
zinc
Answer:
the liquid acid
Explanation:
This because electrolytes are supposed to be in a liquid form.
Answer:
Liquid Acid
Explanation:
The wet cell battery implies that it has an liquid inside.
The Copper and the Zinc are also the compounts that will react in the battery as the semi-reactions implies:
Cu2+(aq) + 2e- --> Cu0
Zn2+(aq) + 2e- --> Zn0
The electrolyte is a substance present in the battery that will help the electricity to flow to the ion of interest and will not participate in the reaction, the acid should work as the electrolyte in this case.
A celebrated Mark Twain story has motivated contestants in the Calaveras County Jumping Frog Jubilee, where frogs jump as long as 2.2 m have been recorded. If a frog jumps 2.2 m and the launch angle is 45°, find (a) the frog’s launch speed and (b) the time the frog spends in the air. Ignore air assistance.
To find the launch speed and the time the frog spends in the air, we can use the equations of projectile motion. The launch speed is approximately 4.4 m/s, and the time the frog spends in the air is approximately 0.63 s.
Explanation:To find the launch speed and the time the frog spends in the air, we can use the equations of projectile motion. Since the frog jumps at a launch angle of 45° and a distance of 2.2 meters, we can use the range equation to find the launch speed:
R = ((V^2) * sin(2θ)) / g
Substituting the given values:
2.2 = ((V^2) * sin(90°)) / 9.8
Simplifying the equation:
(V^2) * sin(90°) = 2.2 * 9.8
V = √((2.2 * 9.8) / sin(90°))
V ≈ 4.4 m/s
To find the time the frog spends in the air, we can use the following equation:
t = (2 * V * sin(θ)) / g
Substituting the given values:
t = (2 * 4.4 * sin(45°)) / 9.8
Simplifying the equation:
t ≈ 0.63 s
Learn more about Projectile motion here:https://brainly.com/question/29545516
#SPJ12
The frog's launch speed and time spent in the air can be calculated using principles of projectile motion. The frog's launch speed is approximately 4.8 m/s, and it spends about 0.7 seconds in the air.
Explanation:To answer your query, we first need to apply some principles of projectile motion, specifically the equations of motion along the x-axis (horizontal) and y-axis (vertical).
For the first part of the question, we need to determine the frog's launch speed. We use the formula for the range of a projectile, given as R = (v^2 * sin(2*θ)) / g, where R is the maximum horizontal distance (2.2 m), θ is the launch angle (45°), g is the gravitational acceleration (approximately 9.8 m/s²), and v is the initial velocity which we're trying to find out. From this, we can calculate the frog's launch speed as approximately 4.8 m/s.
The second part of the question asks for the time the frog spends in the air. This duration is known as the time of flight. To calculate this, we can use the formula t = (2*v*sin(θ)) / g. Substituting the known values into this equation, we get the time spent in the air as approximately 0.7 seconds.
Learn more about Projectile Motion here:https://brainly.com/question/29545516
#SPJ12
A man moving at 2 m/s accelerates at a rate of 3 m/s² for 2.5 seconds. What is the new velocity of the man?
Using the kinematic equation v = u + at, the man's new velocity is found to be 9.5 m/s after accelerating at 3 m/s² for 2.5 seconds.
Explanation:To calculate the new velocity of the man after accelerating, we apply the basic kinematics equation v = u + at, where:
v is the final velocity (which we are trying to find).u is the initial velocity.a is the acceleration.t is the time over which the acceleration occurs.Given that the man's initial velocity (u) is 2 m/s, acceleration (a) is 3 m/s², and the time (t) is 2.5 seconds, we substitute these values into the equation:
v = 2 m/s + (3 m/s²)(2.5 s)
This yields:
v = 2 m/s + 7.5 m/s
The new velocity of the man is:
v = 9.5 m/s
if a particle moving in straight line such that its position varies with time as x=5(t-2) + 6(t-2)^2 ,then intial acceleration is
Answer:
12
Explanation:
x = 5 (t − 2) + 6 (t − 2)²
x = 5t − 10 + 6 (t² − 4t + 4)
x = 5t − 10 + 6t² − 24t + 24
x = 6t² − 19t + 14
Velocity is the derivative of position with respect to time:
v = dx/dt
v = 12t − 19
Acceleration is the derivative of velocity with respect to time:
a = dv/dt
a = 12
The particle's acceleration is constant at 12 (use appropriate units).
Which of the following represents a decimal system of measurement?
1 quart = 16 fluid ounces
1 kilometer = 1,000 meters
1 mile = 5,280 feet
1 pound = 16 ounces
Answer: 1 kilometer = 1,000 meters
Explanation:
The decimal metric system is the predecessor of the International System of Units (SI) and consists of a system in which the multiples and submultiples of the unit of measure are related to each other by multiples or submultiples of ten (10).
It should be noted that this system was created to be neutral and that it could be easily used, understood and adopted by all countries. However, so far only the United States, Myanmar (Burma) and Liberia have retained their traditional units of measurement instead of the Decimal Metric System, which was then replaced by the current SI.
In this sense, two main basic units of this system are the meter (to measure length) and the gram (to measure mass). In the specific case of the meter there are submultiples of the same nature that follow a decimal scale, for example:
[tex]1km = 10^{3} m = 1000m[/tex]
Therefore, among the given options, the one that fulfills the explained conditions is 1 kilometer = 1,000 meters
The other options do not follow a decimal system.
Final answer:
The decimal system of measurement is represented by the option '1 kilometer = 1,000 meters' because it follows the base ten structure of the metric system, where conversions are based on powers of ten.
Explanation:
The decimal system of measurement is exemplified by the base ten structure, which is integral to the SI or metric system. Of the options provided, 1 kilometer = 1,000 meters represents a decimal system of measurement, as it’s based on a multiple of ten, specifically 103 or one thousand. This system is characterized by the ease of conversion among different units of measurement using powers of ten. In comparison, other measurements listed, such as quarts to fluid ounces, miles to feet, and pounds to ounces, are based on the English system, which uses different conversion factors that are not consistently multiples of ten.
A cat is moving at 18 m/s when it accelerates at 4 m/s2 for 2 second. what is his new velocity?
Answer: [tex]26\ \frac{m}{s}[/tex]
Explanation:
His new velocity is the "Final velocity". In order to calculate it, you need to use the following formula:
[tex]V_f=V_0+at[/tex]
Where [tex]V_f[/tex] is the Final velocity, [tex]V_0[/tex] is the Initial velocity, [tex]a[/tex] is the acceleration and [tex]t[/tex] is the time.
Based on the information provided in the exercise, you can identify that:
[tex]V_0=18\ \frac{m}{s}\\\\a=4\ \frac{m}{s^2}\\\\t=2\ s[/tex]
Therefore, you can substitute values into the formula:
[tex]V_f=18\ \frac{m}{s}+(4\ \frac{m}{s^2})(2\ s)\\\\V_f=26\ \frac{m}{s}[/tex]
Then, his new velocity is [tex]26\ \frac{m}{s}[/tex]
Which statement best describes the change in an objects momentum if the net force acting on the object is greatly increased ?
Answer:
Answer C : The object's momentum will greatly increase
Explanation:
Recall that force and linear momentum are closely related by the equation:
[tex]F = \frac{MomentumChange}{time}[/tex]
Both, Momentum Change and Force (F) are in the numerator of on either side of the equation, so they are in direct proportionality. A large force (force greatly increased) will be the reflection of a large change in momentum.
Answer:
The object’s momentum will greatly increase if the net force acting on the object is greatly increased. So option C is the best statement which describes the change in object momentum.
Explanation:
So as the force is directly proportional to momentum and it is obtained by performing the first order derivation of momentum, the variation in force and momentum will have to be same.
[tex]F = \frac{MomentumChange}{time}[/tex]
The force being the derivative of momentum indicates that if the net force acting on object is greatly increased means the momentum will also be undergoing great increase as the acceleration of the object will also be increased greatly due to increase of force.
Two airplanes leave an airport at the same time. The velocity of the first airplane is 740 m/h at a heading of 25.3◦. The velocity of the second is 570 m/h at a heading of 82◦.
How far apart are they after 1.5 h? Answer in units of m.
Final answer:
The distance between the two airplanes after 1.5 hours is 255 m.
Explanation:
To find the distance between the two airplanes after 1.5 hours, we first need to determine the displacement of each airplane. Displacement is a vector quantity that represents the change in position. We can calculate the displacement of the first airplane using the equation:
Displacement = Velocity × Time
Substituting in the given values:
Displacement1 = (740 m/h) × (1.5 h) = 1110 m
Similarly, we can calculate the displacement of the second airplane:
Displacement2 = (570 m/h) × (1.5 h) = 855 m
Finally, we can find the distance between the two airplanes by subtracting the displacements:
Distance = Displacement1 - Displacement2 = 1110 m - 855 m = 255 m
5. What happens to the arrangement of water molecules as ice melts?
A Molecules gain enough energy to escape as vapor.
B Molecules release enough energy to escape as vapor.
C Molecules gain enough energy to move from their fixed positions.
D Molecules release enough energy to move from their fixed positions.
Answer: I am pretty sure the answer is B
Explanation: If not sorry bro.
A Porsche challenges a Honda to a 500 m race
A central purple circle labeled N a has 3 concentric rings around it. The inner ring has 2 small green spheres. The middle ring has 8 small green spheres. The outer ring has 1 small green sphere. Does this atom satisfy the octet rule? Why or why not?
Answer:
This atom doesn’t satisfy octet rule
Explanation:
To satisfy octet rule the outermost shell should have 8 electrons. This is called octet electronic configuration which makes the atom stable. When participating in chemical reactions atoms tend to lose or gain electrons or share electrons like in a covalent bond all to achieve the octet configuration.
In this atom there are three shells and 11 electrons in total. Maximum number of electrons that can be present in the first shell is two and in this atom the first shell contains that maximum electrons. The second can contain maximum 8 electrons. In this atom the second shell is fully filled with 8 electrons.
For octet rule to be satisfied the outermost shell or the valence shell should contain 8 electrons. But in this atom the outermost shell has 1 electron. This means that the atom doesn’t satisfy octet rule. In order to obtain the octet configuration it should lose 1 electron.
Answer:
Answer
Explanation:
Sample Response: No, it does not, because the octet rule says that an atom needs to have eight electrons in its valence shell to be stable. The exceptions are hydrogen and helium, which need only two electrons. This atom has only one electron.
Measuring spoons are used when measuring
less than how much?
Measuring spoons are used when measuring less than 1/4 cup
We can see here that measuring spoons are used when measuring less than 1/4.
What is Measuring spoon?Measuring spoons are used when measuring less than one tablespoon or teaspoon of an ingredient. These spoons are designed to provide accurate measurements for small quantities of dry or liquid ingredients used in cooking and baking. Measuring spoons typically come in sets, with the most common sizes being 1 tablespoon (tbsp), 1 teaspoon (tsp), 1/2 teaspoon, 1/4 teaspoon, and sometimes 1/8 teaspoon.
When recipes call for precise measurements of ingredients, especially in baking, measuring spoons are essential to ensure the right balance of flavors and the desired outcome of the dish. They are particularly useful when dealing with potent or costly ingredients, as small variations in quantities can significantly impact the final result.
Learn more about Measuring spoon on https://brainly.com/question/29067969
#SPJ6
What planet with the largest rings
Answer: saturn
Explanation:
Although the temperature gradient changes from region to region in the homosphere, there is one gradient that stays the same. it continues to decrease as you increase in altitude, no matter where you are in the homosphere. what gradient?
please answer quick
Answer: The amount of air gradient.
Explanation:
Answer:
Pretty sure the answer is air gradient
Explanation:
A train moving with a velocity of 87.1 km/hour North, increases its speed with a uniform acceleration of 0.250 m/s2 North until it reaches a velocity of 160.0 km/hour North. What distance did the train travel while it was increasing its velocity, in units of meters?
Answer:
2780 meters
Explanation:
First, convert km/hr to m/s.
87.1 km/hr × (1000 m / km) × (1 hr / 3600 s) = 24.2 m/s
160.0 km/hr × (1000 m / km) × (1 hr / 3600 s) = 44.4 m/s
Given:
v₀ = 24.2 m/s
v = 44.4 m/s
a = 0.250 m/s²
Find: x
v² = v₀² + 2a (x − x₀)
(44.4 m/s)² = (24.2 m/s)² + 2(0.250 m/s²) (x − 0 m)
x = 2780 m
What happens to the force between the spheres when you increase the mass of one of the spheres?
What happens to the force between the spheres when you increase the mass of both spheres?
The force between the spheres increases when the mass increases in one of the spheres.
Explanation:
Newton law of universal gravity extends gravity beyond the earth's surface. This gravity depends directly on the mass of both objects and is inversely proportional to square of distance between their centers.
[tex]\bold{F=\frac{G \times\left(m_{1} \times m_{2}\right)}{\left(r^{2}\right)}}[/tex]
Since gravity is directly proportional to “mass of both interacting objects”, stronger objects with greater gravitational force attract. If the mass of one object increases, gravity between them also increases. For example, if an object's mass of one double, force between them also doubles.
Answer: The force between two spheres increase when mass of one or both spheres are increased.
Explanation:
According to universal law of gravitation “every body in the universe attracts every other body with a force that is directly proportional to the product of their masses and inversely proportional to the square of the distance between them”.
It is given by the expression
[tex]F=(GM_1 M_2)/r^2[/tex]
Where G is the gravitational constant, [tex]M_1 ,M_2[/tex] are the masses of the bodies and r is the distance between them.
In the question two conditions are given.
Mass of one object is increasedMasses of both objects are increased.Since force between two objects is directly proportional to the masses, the force increases in both cases.
Velocity and acceleration are both vectors; they have a direction. What is thedirection of the velocity and acceleration vectors of a tennis ball that is rising upward towards its highest point above the ground? a.The velocity vector is directed upward. b.The velocity vector is directed downward. c.The acceleration is directed downward. d.Both A & C
The velocity vector of a rising tennis ball is directed upward, while the acceleration vector is directed downward due to gravity slowing the ball down as it reaches its peak.
Explanation:The velocity and acceleration vectors of a tennis ball that is rising upward towards its highest point in its motion can be defined by first understanding that acceleration is a vector in the same direction as the change in velocity. As the tennis ball is moving upwards, its velocity vector is directed upward. However, understanding that acceleration is the rate of change of velocity, the acceleration vector is directed downward because the ball is slowing down as it reaches its highest point, hence the gravity is acting downwards causing its speed to decrease. Therefore, the correct answer is d. Both A & C.
Learn more about Physics of Velocity and Acceleration here:https://brainly.com/question/40191699
#SPJ12
In the case of a tennis ball rising towards its peak, the velocity vector points upward while the acceleration vector due to gravity, points downward.
Explanation:When a tennis ball is rising towards its highest point above the ground, the velocity vector is directed upward because the ball is moving in an upward direction. Thus, the answer 'A' is correct. However, the acceleration vector is directed downward, as the downward force of gravity is acting on the ball at all times, causing a constant acceleration downward, even when the ball is moving upward. Thus, the answer 'C' is also correct. Therefore, in this scenario, for both 'A' and 'C', the velocity vector is directed upward and acceleration is directed downward, true.
Learn more about Velocity and Acceleration here:https://brainly.com/question/14683118
#SPJ12
pls help me solve this physics question
Answer:
C. 1.4 m/s
Explanation:
Energy is conserved:
Initial energy = final energy
At P, the pendulum has only gravitational potential energy.
At Q, the pendulum has only kinetic energy.
PE = KE
mgh = ½mv²
v = √(2gh)
Given h = 0.1 m:
v = √(2 × 9.8 m/s² × 0.1 m)
v = 1.4 m/s
Answer:
1.4
Explanation: