A cannonball is fired on flat ground
at 420 m/s at a 53.0° angle. What
maximum height does it reach?

I believe chemical change is the correct answer.

Silver is a chemical so it certainly will not deal with physical change or physical property.

It cannot be a property since it consists of only one element which is silver.

Cleaning tarnished silver is an example of chemical change, therefore the correct answer is option A.

A chemical reaction is a process in which one or more substances, also known as reactants are converted to one or more different substances, known as products.    

A chemical bonding between a metal and a nonmetal molecule, often oxygen and sulfur dioxide, results in a tarnish.

The result of a chemical interaction between a metal and a non-metal substance like oxygen or sulfur oxides is a tarnish.

Since polishing tarnished silver is an example of a chemical change, option A is the appropriate response.

To learn more about chemical reactions, refer to the link given below;

brainly.com/question/22817140

#SPJ2

Answer:

3.33 km

Explanation:

Use the plane's height to find the time it takes for the bomb to land.

y = y₀ + v₀ t + ½ gt²

0 = 1960 + (0) t + ½ (-9.8) t²

t = 20

Now use the horizontal velocity to find the horizontal distance traveled.  But first, convert km/hr to m/s:

600 km/hr × (1000 m / km) × (1 hr / 3600 s) = 166.67 m/s

x = x₀ + v₀ t + ½ at²

x = 0 + (166.67) (20) + ½ (0) (20)²

x = 3333.33

The distance between A and B is 3.33 km.

Answer:

3.33 km

Explanation:

An aeroplane is flying at 1960m with velocity of 600km/hr and a bomb is dropped at some point A while it reaches at B.the distance between A and B is 3.33 km.

The term 'Theory' best describes the phrase as it refers to a well-substantiated explanation of some aspect of the natural world, that has been repeatedly tested and confirmed through the scientific method.

The term that best describes the phrase 'the best explanation that science has to offer' is Theory. In scientific terms, a 'theory' is more than just a guess. It is a well-substantiated explanation of some aspect of the natural world that is acquired through the scientific method, and repeatedly tested and confirmed through observation and experimentation.

Laws are generally observed patterns that apply universally. Experiments are practical procedures undertaken to derive or validate a fact, and Observation is the act of gathering and analyzing data. These are all integral components of scientific investigation, but the term 'theory' is the one that aligns most closely with 'the best explanation'.

https://brainly.com/question/31772968

#SPJ2

Answer:NO

Explanation:

No, because as it swings it is mechanical energy that changes from almost completely potential energy to almost completely kinetic energy and thermal and sound.

Answer:

B. Generator

Explanation:

A turbine (meaning "turbulence") is a rotary mechanical device that extracts energy from a fluid flow and converts it into useful work. The work produced by a turbine can be used for generating electrical power when combined with a generator  So I prefer to go with option B. generator

Answer:

B. Generator (for Plato/Treca)

Explanation:

A turbine spins to create electricity, therefore, making it a generator.

Answer:

S- waves

Explanation:

S- waves are known as secondary waves or shear waves. They only propagate through solid medium only.

S- waves are elastic seismic waves that propagates transversely moving materials perpendicularly along their direction. In the process, they cause shearing. Only solids have enough shear strength to withstand the movement of s-waves without getting altered. Liquids and gases cannot shear and would not allow s-waves to propagate through them.

Answer:

i believe it is isopropane. sorry if this isnt helpful, but i believe thats correct

Explanation:

Answer:

Ethyne

Explanation:

gradpoint

Answer:

c. the volume of the part of the ship that lies below the water's surface.

Explanation:

As stated in the problem, Archimedes' Principle tells us that that buoyant force on an object is equal to the weight of fluid it displaces.  The volume of water that a ship displaces is the volume it occupies below the surface.

Start with the conservation of energy. The spring potential energy and the mass' kinetic energy will fluctuate over time, but their sum will stay constant. The maximum spring potential energy equals the maximum kinetic energy.

0.5mv² = 0.5kx²

m is the mass, v is the maximum velocity, k is the spring constant, and x is the maximum displacement along the spring.

Given values:

m = 4.1kg

v = 0.78m/s

Calculate the maximum kinetic energy.

Max KE = 0.5mv² = 1.247J

Set this equal to the maximum spring potential energy.

Max spring PE = 0.5kx² = 1.247J

x² = 2.494/k

The spring force is F = kx

Max F = kx = 13N

x = 13/k

x² = 169/k²

Set both values of x² equal to each other and solve for k the spring constant:

2.494/k = 169/k²

2.494k = 169

k = 67.8N/m

Use k to find x:

Max F = kx = 13N

67.8x = 13

x = 0.192m

The frequency of the system is given by:

f = (1/(2π))√(k/m)

f is the frequency, k is the spring constant, m is the mass.

f = (1/(2π))√(67.8/4.1)

f = 0.647Hz

The amplitude is the maximum distance from the mean position. The amplitude for the motion for the given mass is 2.658 m.

[tex]V_{max } = 2\pi fA[/tex]

For Amplitude:

[tex]A = \dfrac { V_{max}}{2\pi f} [/tex]

Where,

[tex]V_{max } [/tex] - maximum velocity of the mass =  0.78 m/s

[tex]f[/tex] - force exerted on the object  = 13  N

[tex]A[/tex]- amplitude = ?

Put the values in the formula and solve it for [tex]A[/tex],

[tex]A = \dfrac {13 }{2\pi \times 0.78 } \\\\ A = \dfrac {13}{4.89}\\\\ A = 2.658[/tex]

Therefore, the amplitude for the motion for the given mass is 2.658 m.

Learn more about the amplitude:

https://brainly.com/question/9351212

Answer:

B. Magnetic Force

Explanation:

two pieces of irons cannot attract each other unless at least one of them is magnetize. That force is called magnetism.

Answer:

D) all different and specific to each

Explanation:

I just finished the test.

Answer:

A. both have critical mass

D. both use chain reactions

Apex.

Answer:

A & D

Explanation:

Explanation:

Mechanical advantage is the ratio of output force to input force.

MA = 2000 N / 120 N

MA = 16.67

Round as needed.

Answer:MA = 2000 N / 120 N

MA = 16.67

Explanation:

Answer:

-THE STIFFNESS OF THE SPRING

-THE FORCE APPLIED TO THE SPRING

-THE DISTANCE THE SPRING IS STRETCHED

Explanation:

Spring stiffness applied force, and stretched distance can most directly affect the motion of a spring.

The force required to extend or compress a spring by some distance scales linearly with respect to that distance is known as the spring force.

Its formula is

F = kx

The factors can most directly affect the motion of a spring:

The stiffness of the spring.

The forces applied to the spring.

The distances the spring is stretched.

Hence, spring stiffness applied force, and stretched distance can most directly affect the motion of a spring.

To learn more about the spring force refer to the link;

https://brainly.com/question/4291098

#SPJ2

Answer:

Explanation:

The sound moves in the form of waves. The amplitude is the distance between the highest and the lowest point of a wave.  In this way the amplitude indicates the amount of energy that a sound signal contains.

Intensity is the amount of acoustic energy that a sound contains. Intensity is measured in decibels. Volume is a measure of the energy that a signal carries, being a magnitude of intensity.

In this way it is possible to say that the energy of a signal is closely related to its amplitude, but its development over time is also important.

The tone or height is the quality that distinguishes between a high or low sound and a low or high sound.

Answer:

V=240 volts

Explanation:

V=IR

V=15*16

Answer:

tan (x eˣ) + C

Explanation:

∫ (eˣ + x eˣ) / (cos² (x eˣ)) dx

First, use u-substitution.

u = x eˣ

du = (eˣ + x eˣ) dx

∫ 1 / (cos² u) du

∫ sec² u du

tan u + C

Substitute back:

tan (x eˣ) + C

The substance with the highest specific heat is water. The correct option is D

Water has a specific heat capacity of about 4.186 joules per gram per degree Celsius (J/g°C), which is significantly higher than most other substances. This means that it requires a large amount of heat energy to raise its temperature by a given amount compared to other materials like soil, mud, or sand.

Due to its high specific heat, water can absorb and store a substantial amount of heat during the day and release it slowly at night, moderating temperature changes in the surrounding environment. This property is essential for maintaining stable climates in various ecosystems and has a significant impact on Earth's weather patterns. In conclusion, water's high specific heat makes it a crucial factor in regulating the planet's temperature and climate.

Read more about specific heat here: https://brainly.com/question/27991746

#SPJ6

Answer:

Frequency of orange light = [tex]5 \times 10^{14}[/tex] Hz

Explanation:

We are given the wavelength of the orange light and we are to find the value of its frequency.

Wavelength of orange light = [tex]6.0 \times 10^{-7} m[/tex]

We know that:

Speed of light = Frequency of orange light × Wavelength of orange light

Substituting the values in the above formula:

[tex]3 \times 10^8[/tex] = Frequency of orange light × [tex]6.0\times10^{-7}[/tex]

Frequency of orange light = [tex]\frac{3 \times 10^8}{6\times10^{-7}} =5 \times 10^{14}[/tex] Hz

Answer:

6.20×10⁴ V/m

Explanation:

The magnitude of electric field is:

E = √(Eₓ² + Eᵧ²)

where Eₓ = ∂φ/∂x and Eᵧ = ∂φ/∂y.

φ = 1.11 (x² + y²)^-½ − 429x

Eₓ = -0.555 (x² + y²)^-(³/₂) (2x) − 429

Eᵧ = -0.555 (x² + y²)^-(³/₂) (2y)

Evaluating at (0.003, 0.003):

Eₓ = -44034 V/m

Eᵧ = -43605 V/m

The magnitude is:

E = 61971 V/m

Rounded to three significant figures, the strength of the electric field is 6.20×10⁴ V/m.

Energy loss. Figure 1. Energy losses in an incandescent light bulb are very large; most of the input energy is lost in the form of heat energy. When energy is transformed from one form to another, or moved from one place to another, or from one system to another there is some energy loss.

There is some energy loss when it is changed from one form to another, and relocated from one location to another.

Energy is a quantifiable quality that may be transferred to a body or a physical system and is noticeable when labor is done as well as when heat and light are produced.

An incandescent light bulb has significant energy losses; the majority of the input energy is dissipated as heat energy. There is some energy loss when it is changed from one form to another, relocated from one location to another, or moved from one system to another.

There is some energy loss when it is changed from one form to another, relocated from one location to another, or moved from one system to another. This implies that some of the incoming energy is transformed into a highly disordered form of energy, such as heat, when energy is transformed into a new form.

To know more about energy follow

https://brainly.com/question/13881533

#SPJ6

Answer:

B

Explanation:

Took on Edge 2022

As the distance between two charged objects increases, the strength of the electrical force between the objects  decreases.

Answer: Decreases

Explanation:

got it right on the assignment. Hope this helps peeps! :]

Answer:

B. 238.59 N

Explanation:

First, use their weight on Earth to find their mass:

W = mg

90 N = m (9.8 m/s²)

m = 9.18 kg

Now use this mass to find the new weight on Jupiter.

W = mg

W = (9.18 kg) (25.98 m/s²)

W = 238.59 N

Answer:

D

Explanation:

If in a given reaction the energy of products is greater than the energy of reactants it means that reaction is endothermic and during the reaction, the energy is absorbed by reactants. In an endothermic reaction, the products have more stored chemical energy than the reactants. And in this reaction the reactants are more stable than products before the compounds with less energy are always more stable.

Answer:

B

Explanation:

In science, it is understood that energy cannot be created, nor destroyed, it can only change form. Hence, certain reactions require a lot of energy, since their products have a higher energy than their reactants, or they release energy because their products have less energy than their reactants.

A: Is incorrect, because a reaction will not absorb energy if the products have less energy than the reactants.

B: Is correct, because in a reaction where the products have less energy, there will be a release of energy into the environment (usually heat).

C: Is incorrect, because there is always a transfer of energy in a chemical reaction.

D: Is incorrect, because energy cannot be "lost". It may be released into the environment, but it cannot be lost.

Explanation:

(a)

The initial vertical velocity is 13 m/s.  At the maximum height, the vertical velocity is 0 m/s.

v = at + v₀

0 = (-9.8) t + 13

t ≈ 1.33 s

(b)

Immediately prior to the explosion, the ball is at the maximum height.  Here, the vertical velocity is 0 m/s, and the horizontal velocity is constant at 25 m/s.

v = √(vx² + vy²)

v = √(25² + 0²)

v = 25 m/s

(c)

Momentum is conserved before and after the explosion.

In the x direction:

m vx = ma vax + mb vbx

m (25) = (⅓ m) (0) + (⅔ m) (vbx)

25m = (⅔ m) (vbx)

25 = ⅔ vbx

vbx = 37.5 m/s

And in the y direction:

m vy = ma vay + mb vby

m (0) = (⅓ m) (0) + (⅔ m) (vby)

0 = (⅔ m) (vby)

vby = 0 m/s

Since the vertical velocity hasn't changed, and since Fragment B lands at the same height it was launched from, it will have a vertical velocity equal in magnitude and opposite in direction as its initial velocity.

vy = -13 m/s

And the horizontal velocity will stay constant.

vx = 37.5 m/s

The velocity vector is (37.5 i - 13 j) m/s.  The magnitude is:

v = √(vx² + vy²)

v = √(37.5² + (-13)²)

v ≈ 39.7 m/s

Answer:

B. 171 N

Explanation:

The equation of the forces along the horizontal and vertical directions are:

Horizontal:

[tex]T_2 cos 62^{\circ} = T_1 cos 20^{\circ}[/tex] (1)

Vertical:

[tex]T_1 sin 20^{\circ} + T_2 sin 62^{\circ} = W[/tex] (2)

Where W = 180 N is the weight of the box.

From (1),

[tex]T_2 \frac{cos 62^{\circ}}{cos 20^{\circ}} = T_1 [/tex]

Substituting into (2),

[tex](T_2 \frac{cos 62^{\circ}}{cos 20^{\circ}}) sin 20^{\circ} + T_2 sin 62^{\circ} = W\\T_2 (cos 62^{\circ} tan 20^{\circ}+sin 62^{\circ})=W\\T=\frac{W}{cos 62^{\circ} tan 20^{\circ}+sin 62^{\circ}}=171 N[/tex]

The tension T2 in the rope is equal to the weight of the box, which is 180 Newtons.

To find the tension T2, we need to analyze the forces acting on the box. From the figure, we can see that there are two forces acting on the box: the weight of the box, which is 180 Newtons acting vertically downwards, and the tension T2 in the rope. Since the box is in equilibrium, the sum of the forces in the vertical direction must be zero. This means that the tension T2 must be equal to the weight of the box, which is 180 Newtons. Therefore, the correct answer is 180 Newtons.

https://brainly.com/question/30794023

#SPJ3

Answer:

Increase. As the water increases, so will the strawberries if watered evenly throughout