Answer:
Explanation:
I'm not sure you can do this without just a bit more information. I can tell you what the mass of the water is when the rocks are removed. When we know that, we know the volume of the water that was displaced. whether or not this is enough information to determine the volume of the box, I'm not sure.
400 grams raises the box 1 cm.
The density of water = 1 gm / cm^3
400 grams of water = 400 mL or 400 cm^3
The volume of the displaced water = 400 cm^3
The volume a slice from the square prism is B*h
B = 400 cm^2
h = 1 cm
If the base is 400 cm^2 then each side is
s^2 = 400
sqrt(s^2)= sqrt(400)
s = 20
The volume of the box is 20^3 = 8000 cm^3
The period and frquency of a wave are inversely related true or false
Answer:
True
Explanation:
As frequency increases, the length of the wave (period) decreases.
As frequency decresaes, the length of the wave (period) increases.
Please mark for Brainliest!! :D Thanks!
For any questions, please comment below and I'll respond ASAP!!
The statement is true; period and frequency have an inverse relationship because the period is the time for one complete wave cycle and frequency is the number of cycles that occur per second.
The statement that the period and frequency of a wave are inversely related is true. The period (T) of a wave is defined as the time for one complete wave cycle, whereas the frequency (f) is the number of waves that pass a point in one second. Because these two quantities measure opposite concepts - time per cycle versus cycles per time - their relationship is inherently inverse, which can be represented mathematically as f = 1/T. Considering electromagnetic waves, we acknowledge that as the wavelength increases, the frequency decreases, demonstrating again the inverse relationship. Similarly, a higher frequency means waves have less time between cycles, leading to a shorter period. This principle is a fundamental concept in wave physics and applies to all types of waves, including sound, light, and mechanical waves.
The image shows a dam. Which descriptions best fit the labels?
X: kinetic energy
Y: potential energy
X: potential energy
Y: kinetic energy
X: mechanical energy
Y: electrical energy
X: electrical energy
Y: mechanical energy
Answer:
X: potential energy
Y: kinetic energy
Explanation:
At x water is held at a height relative to the turbines the water turns. Water is then forced by gravity to move down the dam to try to reduce the potential energy and create an equilibrium.
This process transforms potential energy into kinetic energy once the water is set in motion.
Answer:
X: potential
Z:kinetic
Just did it on edge nuity 2020
A car travels 60 m/s for 10 seconds
Calculate how far it traveled.
Answer:
600 m
Explanation:
60 meters / second is 60 meters traveled in one single second.
in ten seconds, it would be 10 times the amount in one second.
so 60 meters / second times 10 seconds = 600 meters.
Answer: 600 meters
Explanation: 60 meters per second so 60 times 10
A measure of the force that moves charges through a conducting material
Answer:
Voltage
Explanation:
Answer:
the answer of this is voltage
Does the size of the particles change as the substance changes state?
Answer:
Particles stay the same unless there is a chemical change whether the matter is solid, liquid or gas.
Explanation:
When substances change state there is no change in mass so if 100 g of ice is melted 100g of water are formed this will boil to form 100g of steam (this is called "conservation of mass").
Answer:
No. The size of the particles in the substance remains the same when the state of matter changes.
Explanation:
A missile is moving 1810 m/s at a 20.0 degree angle. It needs to hit a target 19,500 m away in a 32 degree direction in 9.20 seconds. What is the direction of the acceleration that the engine must produce?
Answer:
79.1°
Explanation:
Given:
x₀ = 0 m
y₀ = 0 m
x = 19500 cos 32°
y = 19500 sin 32°
v₀x = 1810 cos 20°
v₀y = 1810 sin 20°
t = 9.20
Find:
ax, ay, θ
First, in the x direction:
x = x₀ + v₀ t + ½ at²
19500 cos 32° = 0 + (1810 cos 20°) (9.20) + ½ ax (9.20)²
16537 = 15648 + 42.32 ax
ax ≈ 21.01
And in the y direction:
y = y₀ + v₀ t + ½ at²
19500 sin 32° = 0 + (1810 sin 20°) (9.20) + ½ ay (9.20)²
10333 = 5695 + 42.32 ay
ay ≈ 109.6
The direction of the acceleration is therefore:
θ = atan(ay / ax)
θ = atan(109.6 / 21.01)
θ ≈ 79.1°
Answer:
79.1°
Explanation:
A missile is moving 1810 m/s at a 20.0 degree angle. It needs to hit a target 19,500 m away in a 32 degree direction in 9.20 seconds. The direction of the acceleration that the engine must produce is 79.1°
Evaluate tan45/tan45
Answer:
1
Explanation:
tan 45° = √2\2
tan θ = y\x
According to the Unit Circle, when you divide √2\2 by
itself, you get 1.
I'm not sure I completely understand the expression you want evaluated.
It looks like a fraction with the same exact thing in both the numerator and the denominator. A fraction like that always boils down to ' 1 '.
In the equation Ca(s) + 2H2O(l) -->Ca(OH)2(aq) + H2(g) list each element used as a reactant, and tell how many atoms of each are needed for this reaction.
The reactants are Calcium, Hydrogen and Oxygen.
We need 1 atom of Calcium, 4 atoms of Hydrogen and 2 atoms of Oxygen.
Hope this helps.
r3t40
A mass of 5 kg is moving at 5 m/s when it collides with another mass of 2 kg moving in the same direction at 2 m/s. After the collision they become bonded together. What is the final velocity of the two masses together? 2.22 m/s
6.23 m/s
3.56 m/s
4.14 m/s
Answer:
4.14 m/s
Explanation:
m¹u¹+m²u²=(m¹+m²)v
5(5)+2(2)=(5+2)v
25+4=7v
29=7v
29/7=v
v=4.14 m/s
During a workout, a football player pushes a blocking dummy a distance of 30 m. While pushing the dummy the same distance a second time, what would the player need to change to be certain that power output increases?
Explanation:
Power = work / time
Work = force × distance
Therefore:
Power = force × distance / time
Since the distance is the same, he would have to either increase the force he exerts or decrease the time (increase his velocity) in order to increase the amount of work done.
Answer:
The correct answer is B) The player would need to use a greater force and take less time.
Explanation:
hope this helps :)
can i get brainliest plz
Describe how one plays Dr.Dogeball
Final answer:
Dr. Dodgeball is a playful game in which one player, as the virus, hits others with a sensory ball or tags them with their elbow. Those hit must 'self-isolate' or get 'vaccinated' by designated doctors to stay in the game.
Explanation:
How to Play Dr. Dodgeball
Dr. Dodgeball is an imaginative game inspired by current events and offers an interactive understanding of various concepts such as self-isolation and cooperation. To play the game, one player assumes the role of the virus, tasked with hitting their peers with a sensory ball on a trampoline.
If a player is struck by the ball, they must 'self-isolate' on the edge of the trampoline. This 'isolation' involves counting to 10 and can happen up to three times. On the fourth hit, the player performs a dramatic cough and pretends to 'die'.
In another variation, the virus player tags people with their elbow. Once tagged, a player has 10 seconds to receive a 'vaccine' from one of the two players acting as doctors by being untagged with an elbow touch. If a doctor manages to tag the original virus player, the game ends, and either the roles rotate or the same doctor becomes the new virus for the next round.
The game is flexible and can be played in various settings including neighborhoods, parks, and even remotely using mobile devices.
Overall, Dr. Dodgeball can be described as a playful way to engage in physical activity while incorporating themes from the health world, such as virus transmission and preventive measures, into the gameplay.
What is the importance of the International Space Station?
Answer:
The main purpose of International Space Station is to provide an international labotary for experiment within the space environment. Which, despite all our technological advances, is nearly impossible to replicate here on Earth.
ISS is also a laboratory to prepare us for the next level of the space exploration and the long duration exposure to space that comes with that.
The first law of thermodynamics describes how the heat added to a system is conserved. Heat the internal energy of the system or is transformed into , or both. Heat is just transformed, not created or destroyed.
Answer:
The first law of thermodynamics describes how the heat added to a system is conserved. Heat
⇒ increases the internal energy of the system or is transformed into
⇒ work, or both. Heat is just transformed, not created or destroyed.
Explanation:
edge 2020
The first law of thermodynamics states that the change in internal energy of a system is equal to the net heat transfer into the system minus the net work done by the system. This law emphasizes that energy can be transferred into or out of a system through heat or work, but it cannot be created or destroyed.
Explanation:The first law of thermodynamics is a fundamental principle that applies to energy conservation in thermodynamic systems. It states that the change in internal energy of a system is equal to the net heat transfer into the system minus the net work done by the system.
In equation form, the first law of thermodynamics is represented as AU = Q - W, where AU is the change in internal energy, Q is the net heat transfer, and W is the net work done by the system.
This law emphasizes that energy can be transferred into or out of a system through heat or work, but it cannot be created or destroyed.
Learn more about first law of thermodynamics here:https://brainly.com/question/34644078
#SPJ11
A body has density of 2kg/m² and volume 2m². Find the mass of the volume
Answer:
4kg
Explanation:
density is mass/ volume, 4/2= 2
Answer:
The mass is 4kg
Explanation:
Density of an object is defined as the ratio of the mass of the object to its volume. Mathematically,
Density = mass/volume
Mass is measured in kilogram (kg)
Volume is measured in m³
From the formula;
Mass = Density × volume
Mass = 2kg/m³ × 2m³
Mass = 4kg
A circular track begins at O meters and has a total distance of 100 meters. Juliet starts at the 10-meter mark while practicing
for a race.
After running 45 meters, how far is she from the beginning of the track?
10 meters
35 meters
45 meters
55 meters
Answer:
55 meters
Explanation:
She started at the 10 meter mark, and ran 45 meters. So her final position is:
10 m + 45 m = 55 m
She is 55 meters from the beginning of the track (the 0 meter mark).
Answer:
55 meters
Explanation:
If Juliet starts at the 10-meter mark while practicing for a race, after running 45 meters, she is 55 meters from the beginning of the track.
10 m + 45 m = 55 m
What is the name of the system for conducting a scientific investigation?
Please need help
Answer:
The scientific method
Explanation:
Answer:
the answer would be Scientific method !
Explanation:
:)
The strength of gravitational force is affected by the mass of objects and which of the following?
Answer:
The distance between two objects
Explanation:
Depending on how far away or how close two objects are will affect the gravity.
Gravitational force strength depends only on two factors, mass of objects and distance between the objects.
Explanation:
The distance between two objects experiencing the gravitational force are in inverse relationship in proportionality.
That is, when distance between two increases, “strength of gravitational force decreases”, and vice versa. If the one of the mass is doubled, force of gravity also doubles and if it increases, force of gravity also increases.
In a video game, a ball moving at 0.6 meter/second collides with a wall. After the collision, the velocity of the ball changed to -0.4 meter/second. The collision takes 0.2 seconds to occur. What’s the acceleration of the ball during the collision? Use .
Answer:
-5 m/s²
Explanation:
Acceleration = change in velocity / change in time
a = (v − v₀) / (t − t₀)
a = (-0.4 m/s − 0.6 m/s) / 0.2 s
a = -5 m/s²
The ball decelerates at a rate of -5 m/s².
Answer: -5 m/s²
Explanation:
what are the full forms of RADAR and SONAR
Answer:
RADAR and SONAR. Although they rely on two fundamentally different types of wave transmission, Radio Detection and Ranging (RADAR) and Sound Navigation and Ranging (SONAR) both are remote sensing systems with important military, scientific and commercial applications
Explanation:
Iron oxide reacts with aluminum to give aluminum oxide and iron. What kind of chemical reaction is this? A. combustion B. decomposition C. replacement D. synthesis
Answer: Option (C) is the correct answer.
Explanation:
In a chemical reaction, where two different compounds or a mate and a compound are reacting with each other then more reactive metal is able to displace less reactive metal.
When only one element gets displaced then it is known as a replacement or single replacement reaction.
For example, [tex]Fe_{2}O_{3}(s) + 2Al(s) \rightarrow Al_{2}O_{3}(s) + 2Fe(l)[/tex]
Here, aluminium is more reactive in nature as compared to iron. Hence, iron is replaced by aluminium and this reaction is known as replacement reaction.
Thus, we can conclude that the given chemical reaction is replacement.
How is centripetal force affected if an object increases its mass?
Explanation:
Centripetal force is:
F = m v² / r
where m is mass, v is velocity, and r is radius.
Force is proportional to mass, so if mass increases, then force also increases.
If mass increases centripetal force will also increase
What is centripetal force ?A centripetal force is a net force that acts on an object to keep it moving along a circular path.
centripetal force = m[tex]v^{2}[/tex] /r
where m = mass of the object
v = velocity of the object
r = radius of the circular path
since . mass is directly proportional to centripetal force
hence , if mass increases centripetal force will also increase
learn more about centripetal force
https://brainly.com/question/14249440?referrer=searchResults
#SPJ2
an object in uniform circular motion must be changing its speed in order move in a circular path
Answer:
False
Explanation:
An object in uniform circular motion must be changing its velocity in order to move in a circular path.
In fact, remind that velocity is a vector which consists of a magnitude (the speed) and a direction.
When an object is moving in uniform circular motion, the direction of the motion is constantly changing (since the trajectory is a circle): so, this means that the velocity is also changing. However, this does not imply that the speed of the object is changing. In fact, in a uniform circular motion, the speed of the object remains constant.
A man holding 7N weight moves 7m horizontal and 5m vertical , find the work done
The work done by the man is 35 joules. This work is only done in the horizontal direction because work is the product of force and displacement in the direction of the force.
Work done is calculated by the formula Work (W) = Force (F) imes Distance (d) imes cos( heta), where heta is the angle between the force and the direction of the displacement. Since the force is in the horizontal direction and the displacement is also horizontal, heta is 0 degrees and therefore, cos( heta) = 1. For the vertical movement, the force exerted by the man does not contribute to the work done on the weight since the displacement is perpendicular to the force applied. Hence, the work done while moving vertically is zero. The total work done is then the sum of the work done horizontally and vertically, which is 35 joules + 0 joules = 35 joules.
Which set of data would be best illustrated with a bar graph?
the effect of hours spent exercising on heart rate
the number of skyscrapers in 5 different cities
an illustration of how the humidity in the air responds to the temperature of the air
data showing how the number of hours spent studying affects the score on an exam
Answer:
the number of skyscrapers in 5 different cities ( second choice)
Answer:
the number of skyscrapers in 5 different cities
Explanation:
A bar graph is a perfect way to show the relation between two components where the components are not variable. Here if you look at second option, the two components are: No. of skyscraper and cities. It is evident that the skyscraper's no. is not a variable and will remain fixed.
While if you look at the other option, the components are variable and thus can not be represented on a bar graph.
How did the transcontinental railroad impact travel?
A. It allowed passengers to travel from Chicago to New York.
B. It allowed passengers to travel from Canada to Florida.
C. It allowed passengers to travel from Maine to Florida.
D. It allowed passengers to travel from the Atlantic Ocean to the Pacific.
Answer:
D
Explanation:
The transcontinental railroad was worked on from both sides of America. At the Pacific Ocean and the Atlantic Ocean. The purpose was to make travel easier from one side of the country to the other, and to get American items to the east and west of America for export to other countries, as well as a few other reasons such as building up the interior of America.
The transcontinental railroad revolutionized travel by connecting the Atlantic and Pacific coasts, transforming trade and transportation in the United States.
The transcontinental railroad impacted travel by allowing passengers to travel from the Atlantic Ocean to the Pacific. This monumental achievement connected the West Coast with the eastern rail networks, transforming cross-country travel and trade. It spurred the growth of hub cities like Chicago, which became vital for managing the extensive railroad networks.
A wheelbarrow is a compound machine
True
False
true
A wheelbarrow is a compound machine made up of a lever and a wheel and axle. The handles of the wheelbarrow act as levers to lift materials.
True
Wheelbarrow is a compound machine.
A cylindrical piece of aluminum is 6.00cm y’all and 2.00cm in radius how much does it weigh
Answer:
2.00 N
Explanation:
Weight is mass times gravity:
W = mg
Mass is density times volume:
m = ρV
Volume of a cylinder is:
V = πr²h
Finding the volume:
V = π (2.00 cm)² (6.00 cm)
V = 75.4 cm³
The density of aluminum is 2.7 g/cm³. Finding the mass:
m = (2.7 g/cm³) (75.4 cm³)
m = 204 g
Finding the weight:
W = (0.204 kg) (9.8 m/s²)
W = 2.00 N
The aluminum cylinder weighs 2.00 N.
The horizontal component of force acting at an angle of 30 degree with the horizontal is 100N.Find the magnitude of the force and its vertical component.
Explanation:
Using trigonometry:
cos θ = Fx / F
cos 30 = 100 / F
F = 115.47
tan θ = Fy / Fx
tan 30 = Fy / 100
Fy = 57.74
The magnitude is 115.47 N and the vertical component is 57.74 N. Round as needed.
by what are isotopes identified?
A.mass numbers
B.atomic masses
C.atomic mass units
D.average atomic masses
Hybrid seeds are deliberately crossbred for particular traits, such as growth pattern or disease resistance. They have been hand-pollinated and are patented, often sterile, and genetically identical within food types. These plants are usually grown in a monocultural environment and are cultivated for mass production and sale. They must be sturdy to withstand mechanical picking and cross-country shipping. They do not compare to the quality and taste of heirloom plants, but they do produce large, healthy fruit that appeals to most shoppers. Unlike heirloom seeds, if one saves a hybrid seed, one will not get the same plant again.
Which statement can be removed and not affect the excerpt’s reliability?
Answer:
Unlike heirloom seeds, if one saves a hybrid seed, one will not get the same plant again.
Explanation:
The statement that can be removed without affecting the reliability of overall paragraph is, "unlike heirloom seeds, if one saves a hybrid seed, one will not get the same plant again". This is because even if we remove this line, the paragraph still looks completely understandable, reliable and in a flow.
If we talk about hybrid plants, we know that they are produced through cross pollination of the crops with desired traits. Although they are sterile and cannot produce offspring, however the plants which are raised from these seeds are edible and quite healthy. This is why these plants have better yield and a better resistance against environmental constraints like diseases and stresses. After the production, hybrid seeds are stored and they are able to produce plants of similar types.
Hope it helps!
Answer:
C on edg
Explanation: