a gas has a volume of 350 cubic centimeters at 740 mmHg. how many cubic centimeters will the gas occupy at a pressure of 900 mmHg if the temperature remains constant?

Answers

Answer 1

Answer: 287.8 cm3

Explanation:

Given that:

Initial volume of gas V1 = 350 cm3

Initial pressure of gas P1 = 740 mmHg

New volume V2 = ?

New pressure P2 = 900 mmHg

Since, pressure and volume are involved while temperature is constant, apply the formula for Boyle's law

P1V1 = P2V2

740 mmHg x 350 cm3 = 900mmHg x V2

V2 = (740 mmHg x 350 cm3) /900mmHg

V2 = 259000 mmHg cm3 / 900mmHg

V2 = 287.8 cm3

Thus, the gas will occupy 287.8 cubic centimeters at the new pressure.


Related Questions

PLEASE HELP ASAP!!!!!
What do the periods (horizontal rows) and groups (vertical columns) of the periodic table indicate to us about the elements that are categorized within them?

Answers

Answer:

Periods indicate that a new period at a new principal energy level which is filled with electrons. Groups indicate that the elements share similar properties because their shells are filled with the same number of valence electons.

Explanation:

We see that starting at period 2 Li has a  +1 charge , He has +2 charge, B has +3 charge, C has the potential to have a +4 charge or -4 charge (because it can gain or loose electrons) and N has a -3 charge, etc. Groups however, have similar properties and every element in a 1A - 8A has the same number of valence electrons. All except the noble gases in which He only needs 2 electrons to be in a perfect state. This is its octet as it would be a completely different element if it had more than 2 electrons in its shell. An example of the groups sharing similar properties is if we were to look at group 1A. In group 1A we find H, Na, K, etc. These are all highly unstable elements when alone (not in a compound) and they are very reactive. If you were to put Na for instance in water, it would light up and you'd see a flame sitting on top of the water. A scientist could do that with the rest of the elements in the group and they would see this increasing in reactivity as you go down the periods. Francium isn't visible long enough to be able to see this happen though. It's more of that kind of element that scientists prove that it exists, but not a very common element to get to learn much about.

Final answer:

Periods indicate electron shells, while groups represent elements with similar chemical properties.

Explanation:

The periods in the periodic table, which are the horizontal rows, indicate the energy levels or electron shells of the elements within them. As you move across a period from left to right, the number of protons and electrons in the elements increases by one, leading to periodic changes in properties.

The groups in the periodic table, which are the vertical columns, represent elements with similar chemical properties. Elements within the same group have the same number of electrons in their outermost shell, leading to similar reactivity and chemical behavior.

I NEED HELP ASAP!!!!
The animal-like parasite plasmodium causes the disease?
PLEASE HURRY

Answers

Answer: malaria

Explanation:

Answer:

malaria

Explanation:

Thermal conductors____.
A. have high conductivity
B. have low conductivity
C. are often metals
D. have low latent heat
E. have lgh of air pocket

Answers

c) are often metals

liquids are fairly good thermal conductors while gases and things like wood and plastic foam are poor conductors of heat.

Thermal conductors have high thermal conductivity and are usually metals because they have free electrons that are efficient at transferring heat. Latent heat is not a direct measure of thermal conductivity. Thus, it can be stated that thermal conductors have high conductivity (option A).

Thermal conductors are materials that have a high ability to transfer heat through them. Among the multiple-choice options provided, the correct answers that accurately define thermal conductors are:

A. have high conductivity - Thermal conductors have high thermal conductivity, meaning they can efficiently transfer heat.

C. are often metals - Most metals, such as copper and aluminum, are good examples of thermal conductors due to the presence of free electrons which facilitate the transfer of heat.

In the context of the options provided related to latent heat, the most appropriate option is A (have high conductivity) which is a characteristic of a thermal conductor. Latent heat primarily concerns the heat absorbed or released during phase changes, not thermal conductivity.

When we speak about materials' thermal properties, we often refer to conductors and insulators. Good electrical conductors, which are typically metals, are also known to be good heat conductors due to the free movement of electrons that transport thermal energy.

The Hall-He'oult process is expensive and consumes large amounts of
energy to produce __
O
Aluminum
Iron ore
O Gold
Silver
What is the answer

Answers

The Hall-He'oult process is expensive and consumes large amounts of
energy to produce Aluminum.

One major problem with wind and solar energy is that they are conditional. Explain how hydroelectric pumped storage could be used to eliminate this obstacle?

please help me!​

Answers

Answer:

The wind energy and solar energy have their own benefits when producing electricity but one of their major drawbacks is that both these energy form depends on the environmental conditions and cannot be stored.

On the other hand, in hydroelectric pumped storage, water is stored in the form of gravitational potential energy. If not enough water is there to produce electricity, then this stored water can be run over turbines to produce electricity. Hence, this is one benefit of hydroelectric pumped storage over wind and solar energy.

Answer:

These pumps allow the energy to be saved for future use, whenever the load increases.

Explanation:

Pumped-storage hydropower (PSH) is a type of hydroelectric energy storage. It is a configuration of two water reservoirs at different elevations that can generate power (discharge) as water moves down through a turbine; this draws power as it pumps water (recharge) to the upper reservoir.

PSH capabilities can be characterized as open-loop—where there is an ongoing hydrologic connection to a natural body of water—or closed-loop, where the reservoirs are not connected to an outside body of water.

Which sweet tea would you expect to taste the sweetest? *

Answers

Answer:

8M IM NOT SURE SO. IF YOU CAN GET A CLEARED PICTURE OF IT WOULD REALLY HELP

Final answer:

The sweetest tea would be the one that contains the highest amount of sugar. The sweetness of a drink is determined by sugar content. Hence, a sweet tea with larger sugar amount will taste sweeter.

Explanation:

The sweetness of tea is determined by the amount of sugar that it contains. So among different sweet teas, the one with the highest amount of sugar will taste the sweetest. For instance, if Tea A contains 20grams of sugar per serving and Tea B contains 30grams of sugar per serving, then Tea B would taste sweeter than Tea A, because it contains more sugar.

Learn more about Sugar Content here:

https://brainly.com/question/17067135

#SPJ3

SOMEONE PLEASE HELP!!! How much energy was required to heat a 5.00g sample of liquid water at 25.0°C to 100°C? (Specific heat of water is 4.184J/g°C).

Answers

Answer:

Q = 1569 j

Explanation:

Given data:

Mass of water = 5.00 g

Initial temperature = 25.0°C

Final temperature = 100°C

Cp = 4.184 j/g.°C

Energy needed = ?

Solution:

Specific heat capacity:

It is the amount of heat required to raise the temperature of one gram of substance by one degree.

Formula:

Q = m.c. ΔT

Q = amount of heat absorbed or released

m = mass of given substance

c = specific heat capacity of substance

ΔT = change in temperature

ΔT =  100°C - 25°C

ΔT =  75°C

Q = 5 g× 4.184 j/g.°C×75°C

Q = 1569 j

A 250g sample of water with an initial temperature of 98.8oC loses 1794 cal of heat. What is the final temperature of the water?

Answers

Answer:

91.62 C

Explanation:

Q  =  ( m ) ( Csh ) ( T2 - T1 )

T2  = T1  +  ( Q ) / ( m ) ( Csh )

T2  =  98.8 C  +  ( - 7500 J ) / ( 250 g ) ( 4.186 J/g - C )

T2  =  91.6 C

The final temperature of the water is approximately [tex]\(91.624 \, ^\circ \text{C}\).[/tex]

To calculate the final temperature of the water, we'll use the heat transfer equation:

Q = [tex]mc\Delta T[/tex]

Given values:

m = 250g (mass of water)

c = [tex]1 \, \text{cal/g}^\circ \text{C}\)[/tex] specific heat capacity of water)

Q = -1794 cal (negative because heat is lost)

Now, we'll rearrange the formula to solve for [tex]\(\Delta T\)[/tex] :

[tex]\[\Delta T = \frac{Q}{mc}\][/tex]

Substitute the values:

[tex]\[\Delta T = \frac{-1794 \, \text{cal}}{(250 \, \text{g})(1 \, \text{cal/g}^\circ \text{C})}\][/tex]

Now, calculate [tex]\(\Delta T\)[/tex]:

[tex]\[\Delta T \approx -7.176 \, ^\circ \text{C}\][/tex]

The negative sign indicates a decrease in temperature, which makes sense since heat was lost.

Now, find the final temperature [tex](\(T_{\text{final}}\))[/tex] :

[tex]\[T_{\text{final}} = T_{\text{initial}} + \Delta T\][/tex]

[tex]\[T_{\text{final}} = 98.8 \, ^\circ \text{C} - 7.176 \, ^\circ \text{C}\][/tex]

[tex]\[T_{\text{final}} \approx 91.624 \, ^\circ \text{C}\][/tex]

So, the final temperature of the water is approximately [tex]\(91.624 \, ^\circ \text{C}\)[/tex].

Try to know more about temperature :

https://brainly.com/question/32246379

#SPJ3

Approximately how many mineral species have scientists identified?

250

5000

1500

60

Answers

I think it’s 5000 because it says that their is over 4,124 valid species of minerals.
5000 is the correct answer

The letter R indicates round seeds that are dominant over the wrinkled variety, represented by r. Create a Punnett square by selecting the genetic makeup of the parents. You can make the parents both homozygous, both heterozygous, or a combination. Show the possible outcomes of the traits in their offspring.

Answers

Answer and Explanation:

Let's just make it easy and have both parents be heterozygous. This means that they each have 1 dominant allele (R) and 1 recessive allele (r). Make a Punnett Square (see attachment).

The possible outcomes are RR (one of it), Rr (two of it), and rr (one of it). That means that phenotypically, 3 of the offspring will be round and 1 will be wrinkled.

Answer:

Rr,    RR,    rr

Explanation:

Calculate the energy in joules, 245 Calories = __joules
C
.
245 Calories

Answers

Answer:

1025.05

Explanation:

1calories=4.184 joulse

so if multiply 245 by 4.184

The calculation of energy from calories to joules is determined below:

245 Calories = 1029 joules.

What is One Joule?

One Joule may be defined as the amount of energy that is significantly required to be exerted when a force of one newton is put in an application over a displacement of one meter.

The calorie may be defined as the amount of heat needed at a pressure of 1 atm in order to enhance that temperature of 1 gram of any solution by 1°C.

According to the question,

The total amount of calories = 245.

As per the common calculation or conversion factors,

1 calorie ≅ 4.2 Joules.

∴ 245 calories = 245 × 4.2 = 1029 Joules.

Therefore, according to the calculation, the total amount of energy in 245 Calories is equal to 1029 joules.

To learn more about Joules, refer to the link:

https://brainly.com/question/490326

#SPJ2

How many valence electrons does bromine have

Answers

7 valence electrons

Explanation:

Answer:

7

Explanation:

because it is in group 17 so you would use the 2nd digit and that would be 7!

Consider the reaction below.

2NH3(e) N218) + 3H218)

What is the most likely effect to the forward reaction if there is an increase in pressure on this reaction?


The reactant surface area increases

The reaction rate decreases.

The reaction is not affected at all.

The reaction stops completely

Answers

it decreases i believe

19. Which atom in a water molecule has the greatest electronegativity?
a. one of the hydrogen atoms
b. both hydrogen atoms
c. the oxygen atom
d. There is no difference in the electronegativities of the atoms in a water molecule.

Answers

Answer:

The Oxygen Atom

Explanation:

The oxygen atom in a water molecule has the greatest electronegativity. Therefore, the correct option is option C.

What is electronegativity?

The tendency of an atom of a particular chemical element could attract shared electrons while forming a chemical bond is represented by the symbol. The electronegativity of an atom is determined both by its atomic number as well as the distance between its valence electrons and the charged nucleus.

The higher the related electronegativity, the more electrons an atom or substituent group attracts. Electronegativity is a simple approach to quantify bond energy as well as the sign and degree of a bond's molecular polarity, that describes a bond all along continuum between covalent through ionic bonding. The oxygen atom in a water molecule has the greatest electronegativity.

Therefore, the correct option is option C.

To learn more about electronegativity, here:

https://brainly.com/question/1163776

#SPJ6

calculate the amount of miles of HCI is needed to make 500.0 mL of a 0.200M solution

Answers

Answer: 0.4 moles

Explanation:

Given that:

Amount of moles of HCI = Z (let unknown value be Z)

Volume of HCl = 500.0 mL

Convert 500.0 mL to liters

If 1000ml = 1L

500.0 mL = (500.0 mL/1000mL) = 0.5L

Molarity of HCl solution = 0.200M

Recall that molarity of a solution is obtained by dividing the amount of moles by volume in liters

i.e Molarity = Amount in moles/volume

0.200M = Z x 0.5L

Z = 0.200M / 0.5L

Z = 0.4 moles

Thus, 0.4 moles of HCl is needed to make the solution

The average adult human burns 2.00x20^3 kcal per day in energy. What is this rate in kJ per hour?

Answers

Answer:

1.61 × 10⁶ kJ

Explanation:

The human burns energy so as to be healthy.

The amount of energy burnt per day by an adult human is 2 × 20³ kcal per day. Since there is 24 hours in a day, the amount of energy burnt per hour is 2 × 20³ × 24 = 48 × 20³ kcal per hour.

The conversion rate of kcal to kJ is 1 kcal = 4.184 kJ. Therefore converting the kcal per hour to kJ per hour gives:

48 × 20³ × 4.184 = 200.882 × 20³ kJ = 1.61 × 10⁶ kJ

Final answer:

Rate in kJ per hour = 34.93 kJ/hTo convert the rate from kcal per day to kJ per hour, you can multiply the average daily energy burn by the conversion factor of 4.184 kJ/kcal and 1 day/24 hours.

Explanation:

To convert kcal to kJ, we can multiply by a conversion factor of 4.184.

Therefore, to find the rate in kJ per hour, we can multiply the average daily energy burn by the conversion factor for both kcal to kJ and hours to days.

The calculation would be:

Rate in kJ per hour = (2.00x10³ kcal/day) x (4.184 kJ/kcal) x (1 day/24 hours)

The rate in kJ per hour = 34.93 kJ/h

QUESTION 25
How many H20 molecules are in 24 g H20?

Answers

Answer:

8.03x10^23 molecules.

Explanation:

A background knowledge of Avogadro's hypothesis shows that 1 mole of any substance contains 6.02x10^23 molecules

From the above hypothesis which is know today as Avogadro's law, 1 mole of H2O also contains 6.02x10^23 molecules.

1 mole of H2O = (2x1) + 16 = 2 + 16 = 18g.

Now, we can find the number of molecules contained in 24g of H2O as follow:

18g of H2O contains 6.02x10^23 molecules.

Therefore, 24g of H2O will contain = (24x6.02x10^23)/18 = 8.03x10^23 molecules.

From the calculations made above,

24g of H2O contains 8.03x10^23 molecules.

Which particle is a neutron most equal to in mass? A. a molecule B. an atom C. a proton D. an electron

Answers

The neutron is most equal to a proton  in mass.

The mass of a neutron is 1.67492749804 × 10−27 kg, while the mass of a proton is 1.67262189832 × 10−27 kg. This means that the neutron is only about 0.1% heavier than the proton.

Electrons are much lighter than neutrons and protons, with a mass of 9.1093837015 × 10−31 kg. This means that the neutron is about 1,836 times heavier than the electron.

Atoms and molecules vary widely in mass, so it is impossible to say definitively which one is most equal to a neutron in mass. However, a typical atom, such as carbon, is about 12 times heavier than a neutron, while a typical molecule, such as water, is about 18 times heavier than a neutron.

To know more about neutron

https://brainly.com/question/28992636

#SPJ12

PLEASE HELP!!! ON A TIMER, WILL MARK BRAINLIEST

Which equation represents the correct net ionic equation for the reaction between Ca(OH)2 and H2SO4?
Upper H superscript plus, plus upper O upper H superscript minus right arrow upper H subscript 2 upper O.
2 upper H superscript plus, plus 2 upper O upper H superscript minus right arrow upper H subscript 2 upper O.
Upper C a superscript 2 plus, plus 2 upper O upper H superscript minus, plus upper S upper O subscript 4 superscript 2 minus right arrow upper C a superscript 2 plus, plus upper S upper O subscript 4 superscript 2 minus, plus 2 upper H subscript 2 upper O.
Upper C a (upper O upper H) subscript 2 plus upper H subscript 2 upper S upper O subscript 4 right arrow upper C a upper S upper O subscript 4 plus 2 upper H subscript 2 upper O.

Answers

Answer:

its not 2H+ + 2OH- -> H20

Explanation

answer is A on ed2020

The net ionic equation for the reaction between Ca(OH)2 and H2SO4 is; 2OH^-(aq) + 2H^+(aq) ----->2H2O(l).

What is net ionic equation?

The net ionic equations shows the ions that underwent a change in te cause of the reaction. Hence, the net ionic equation would always exclude the spectator ions.

In this case, the net ionic equation is; 2OH^-(aq) + 2H^+(aq) ----->2H2O(l). The calcium and the sulfate ions are spectator ions.

Learn more about net ionic equation: https://brainly.com/question/4822356

Compounds are _____substances.

neutral
charged
ionized
non-neutral

Answers

Answer:

Neutral

Explanation:

Ionic compounds are electrically neutral because they form ionic bonds between positively and negatively charged atoms.

Answer:

neutral

Explanation:

just built different

how many moles of water as a gas can be formed 2.45 L

Answers

Answer:

0.11mole

Explanation:

Let us assume that the condition is at standard temperature and pressure(STP);

 Given parameters:

        Volume of water  = 2.45L

   Unknown:

       Number of moles found in this volume of water  = ?

Solution;

 At STP;

                 Number of moles  = [tex]\frac{volume of gas}{22.4}[/tex]

 Input the parameters and solve;

                  Number of moles of water  = [tex]\frac{2.45}{22.4}[/tex]   = 0.11mole

The number of moles of water found is  0.11mole

Calculate the amount, in moles, of PO43- present at equilibrium when excess Sr3(PO4)2 is added to 750. mL 1.2 M Sr(NO3)2(aq). Assume no change in volume. For Sr3(PO4)2, Ksp = 1.0×10-31.

Answers

Answer:

1.8 × 10⁻¹⁶ mol  

Explanation:

(a) Calculate the solubility of the Sr₃(PO₄)₂

Let s = the solubility of Sr₃(PO₄)₂.

The equation for the equilibrium is

Sr₃(PO₄)₂(s) ⇌ 3Sr²⁺(aq) + 2PO₄³⁻(aq); Ksp = 1.0 × 10⁻³¹

                         1.2 + 3s          2s

[tex]K_{sp} =\text{[Sr$^{2+}$]$^{3}$[PO$_{4}^{3-}$]$^{2}$} = (1.2 + 3s)^{3}\times (2s)^{2} = 1.0 \times 10^{-31}\\\text{Assume } 3s \ll 1.2\\1.2^{3} \times 4s^{2} = 1.0 \times 10^{-31}\\6.91s^{2} = 1.0 \times 10^{-31}\\s^{2} = \dfrac{1.0 \times 10^{-31}}{6.91} = 1.45 \times 10^{-32}\\\\s = \sqrt{ 1.45 \times 10^{-32}} = 1.20 \times 10^{-16} \text{ mol/L}\\[/tex]

(b) Concentration of PO₄³⁻

[PO₄³⁻] = 2s = 2 × 1.20× 10⁻¹⁶ mol·L⁻¹ = 2.41× 10⁻¹⁶ mol·L⁻¹

(c) Moles of PO₄³⁻

Moles = 0.750 L × 2.41 × 10⁻¹⁶ mol·L⁻¹ = 1.8 × 10⁻¹⁶ mol

Final answer:

To calculate the amount of PO4^3- present at equilibrium, we can use the stoichiometry of the reaction and the amount of Sr3(PO4)2 added. Since the reaction has a 1:2 stoichiometry, the amount of PO4^3- is twice the amount of Sr3(PO4)2 added. The amount of Sr3(PO4)2 added can be calculated using the molarity and volume of the Sr(NO3)2 solution.

Explanation:

To calculate the amount of PO43- present at equilibrium, we need to use the concept of solubility product constant (Ksp) and the stoichiometry of the reaction.

First, let's write the balanced equation for the reaction:

Sr3(PO4)2(s) → 3Sr2+(aq) + 2PO43-(aq)

According to the stoichiometry of the reaction, 1 mole of Sr3(PO4)2 produces 2 moles of PO43-. Therefore, if we have excess Sr3(PO4)2, all Sr3(PO4)2 will dissolve and the amount of PO43- at equilibrium is equal to twice the amount of Sr3(PO4)2 added.

Since we have 750 mL of 1.2 M Sr(NO3)2, we can calculate the amount of Sr3(PO4)2 added:

750 mL * 1.2 mol/L = 900 mol Sr2+

Therefore, the amount of PO43- present at equilibrium is 2 * 900 mol = 1800 mol.

Learn more about Solubility Product Constant here:

https://brainly.com/question/1419865

#SPJ11

What do lightning and stars have in common?
1 Both contain all three states of matter
2 Both have a fixed volume and shape
3 Both have no electrical charge
4 Both are made of plasma

Answers

Answer:

stars and lightning are both made of plasma.

Final answer:

Lightning and stars both consist of plasma, the 'fourth state of matter' that includes a significant number of electrically charged particles. Stars are essentially balls of glowing plasma, while lightning is a rapid discharge of energy that forms plasma.

Explanation:

Lightning and stars both have something important in common - they are made of plasma. Plasma is often referred to as the 'fourth state of matter,' distinct from solid, liquid, or gas. It is an ionized gas, which means it contains a significant number of electrically charged particles—positive ions and negative electrons.

Stars, including our sun, are essentially massive balls of glowing plasma. On the other hand, lightning is a dramatic natural phenomenon generated when electrical charges separate within a cloud and cause a rapid discharge of energy, also forming plasma. This results in a bright flash of light and an accompanying shock wave that we hear as thunder. Thus, the primary similarity between lightning and stars is their plasma composition.

Learn more about Plasma here:

https://brainly.com/question/31510915

#SPJ11

What information do you need to convert between moles and mass of a substance?

Answers

Answer:A substance's molar mass is calculated by multiplying its relative atomic mass by the molar mass constant (1 g/mol). The molar mass constant can be used to convert mass to moles. By multiplying a given mass by the molar mass, the amount of moles of the substance can be calculated.

Explanation:

Answer: molar mass

Explanation:

Mole = mass/molar mass

Mass = molar mass × mole

The pressure of a sample of helium in a 1.00-L container is 0.988 atm. What is the new pressure if the sample is placed in a 2.00-L container?

Answers

Answer : The new pressure if the sample placed in a 2.00-L container is, 0.494 atm.

Explanation :

Boyle's Law : It is defined as the pressure of the gas is inversely proportional to the volume of the gas at constant temperature and number of moles.

[tex]P\propto \frac{1}{V}[/tex]

or,

[tex]P_1V_1=P_2V_2[/tex]

where,

[tex]P_1[/tex] = initial pressure = 0.988 atm

[tex]P_2[/tex] = final pressure = ?

[tex]V_1[/tex] = initial volume = 1.00 L

[tex]V_2[/tex] = final volume = 2.00 L

Now put all the given values in the above equation, we get:

[tex]0.988atm\times 1.00L=P_2\times 2.00L[/tex]

[tex]P_2=0.494atm[/tex]

Thus, the new pressure if the sample placed in a 2.00-L container is, 0.494 atm.

The new pressure if the sample is placed in a 2.00-L container is 0.494 atm.

Boyle's Law:

It means the pressure of the gas should be inversely proportional with respect to the volume of the gas at the same temperature also the no of moles.

P1V1 = P2V2

Here

P1 = initial pressure = 0.988 atm

P2 = final pressure = ?

V1 = initial volume = 1.00 L

V2 = final volume = 2.00 L

So,

the new pressure should be

0.988 * 1.00L = P2 * 2.00l

So, P2 is 0.494 atm

Learn more about pressure here: https://brainly.com/question/22406030

Identifying Processes of the Carbon Cycle
Quick
Check
How do consumers obtain the carbon that they need for their life processes?
They breathe it in from the surrounding air.
They break down the plants and animals they eat.
They absorb it from the surrounding soil.
They absorb it from water through their pores.

Answers

Answer:

They break down the plants and animals they eat.

Explanation:

Consumers are the organisms which feed on plants and animals for obtaining energy. The carbon which is present in plant body in the form of glucose which is made in the process of photosynthesis. When these plants are eaten by consumers, the carbon which present in plants are transferred into the animal's body. This carbon is removed from the body of consumer in the process of cellular respiration and again goes to the atmosphere.

When an acid solution exactly neutralizes a base
solution, which acid-base combination always
produces a mixture with a pH less than 7?
Select one
-a weak acid and a weak base
- a strong acid and a strong base
-a weak acid and a strong base
-a strong acid and a veak base

Answers

Answer:a weak acid and a weak base

Explanation:

How many milliliters of a 0.205 M solution of glucose, C6H12O6, are required to obtain 150.1 g of glucose?

Answers

Answer:

4050 mL

Explanation:

Given data:

Mass of glucose = 150.1 g

Molarity of solution = 0.205 M

Volume of solution = ?

Solution:

Molarity  = number of moles of solute / L of solution.

Now we will calculate the moles of sugar first.

Number of moles = mass/ molar mass

Number of moles = 150.1 g/ 180.156 g/mol

Number of moles = 0.83 mol

Now we will determine the volume:

Molarity  = number of moles of solute / L of solution.

0.205 M = 0.83 mol / L of solution.

L of solution = 0.83 mol / 0.205 M

L of solution = 4.05 L

L to mL conversion:

4.05 L × 1000 mL / 1 L = 4050 mL



Every summer, Mary spent sunny days out in the sun. She never wore a hat or sunscreen. When she became a teenager, Mary started lying in a tanning bed before summer arrived. By the time Mary was 25 years old, she had begun to get small sores on her arms and shoulders.

It is very likely that Mary will end up with some form of


A)
HIV/AIDS.


B)
skin cancer.


C)
bacterial infection.


D)
Parkinson's disease.

Answers

The answer to your question is option B, skin cancer.

Final answer:

Given her prolonged and unprotected exposure to UV light from the sun and tanning beds, it is very likely that Mary will develop some form of skin cancer. Sunburns and the use of tanning beds significantly increase the risk of skin cancer by damaging the DNA in skin cells and causing abnormal cell growth.

Explanation:

The story of Mary's repeated and unprotected exposure to the sun and her use of tanning beds highlights a significant health concern. Given the information, it is very likely that Mary will end up with some form of skin cancer. Ultraviolet (UV) light from the sun and tanning beds can damage the DNA in skin cells, leading to abnormal cell growth and potentially cancerous tumors. Skin cancer is classified into various types, including melanoma, basal cell carcinoma, and squamous cell carcinoma, with varying degrees of severity and treatment modalities. Mary's small sores on her arms and shoulders could be early signs of skin cancer, emphasizing the importance of protective measures against UV radiation, such as wearing sunscreen with a high SPF, wearing protective clothing, and avoiding excessive sun exposure and the use of tanning beds.

Options like HIV/AIDS, bacterial infection, and Parkinson's disease are unrelated to the described behavior and symptoms. Skin cancer is directly linked to the conditions described in Mary's case, making it the most likely outcome of her prolonged and unprotected exposure to UV radiation.

Sprite has a [H+] = .000045 M. What is its pH?

Answers

Thi answer is to be 5

Final answer:

The pH of Sprite with a [H+] concentration of .000045 M is approximately 4.35, which is calculated using the formula pH = -log([H+]).

Explanation:

To calculate the pH of Sprite, which has a hydrogen ion concentration [H+] = .000045 M, we use the formula pH = -log([H+]). By inserting the given concentration into this formula, we find that pH = -log(.000045). Using a calculator to perform this logarithm results in a pH of approximately 4.35.

This calculation demonstrates the acidic nature of Sprite, as a pH lower than 7 indicates an acidic solution. The understanding of pH is crucial in chemistry to determine the acidity or basicity of a solution.

Other Questions
a woman likes to draw she is very good at but also like photography and she is looking for a stable career which one should she do All of the noble gases, Group 18, have eight valence electrons in its outer shell (excluding helium which only has two). Which of these would represent the oxidation number of the noble gases such as xenon and argon? William's typical running speed is 6 mi/h. The difference between his fastest speed and his typical speed is 1.5 min. The equatiof-1.5 = 6 can be used to represent this problem, where fis William's fastest speed. What is William's fastest speed?A) 4.5 mi/h B) 5.5 mi/hC)6.5mi/hD) 7.5 mi/h A 4-column table with 5 rows. The first column is labeled x with entries 1, 2, 3, 4, 5. The second column is labeled y with entries 26, 13, 19, 2, 12. The third column is labeled predicted with entries 22.2, 18.3, 14.4, 10.5, 6.6. The fourth column is labeled residual with entries 3.8, negative 5.3, 4.6, negative 8.5, 5.4.For the given table, which point lies on the residual plot?(1, 26)(2, 18.3)(3, 4.6)(4, 19) Mitchell has decided to give his dog a longer leash to roam in the backyard. If the new 7 ft. leash is tied to the center pole in the yard, how much area in the yard does the dog have to move around? If Jenn's testimony is correct, why is it strange that she drives Jay to get rid of the clothes he wore the night before? (10/40) what will happen for demand for commodity of the price of its substitution goods falls How much current is in a circuit that includes a 9.0-volt battery and a bulb with a resistance of 4.0 ohms? A. 0.44 amps B. 36 amps C. 2.3 amps D. 13 amps To divide 14 2/3 divide by 2 3/4, Erik multiplied 14 2/3 times 4/3. Explain Erik's error. What is the composition of VLP? What are its characteristics? You have a summer job at a company that developed systems to safely lower large loads down ramps. Your team is investigating a magnetic system by modeling it inthe laboratory. The safety system is a conducting bar that slides on two parallel conducting rails thatrun down the ramp (similar to the one in the previous problem). The bar is perpendicular to the railsand is in contact with them. At the bottom of the ramp, the two rails are connected together. The box slides down the rails through a uniform vertical magnetic field. The magnetic field is supposed to causethe bar to slide down the ramp at a constant velocity even when friction between the bar and the rails negligible.Before setting up the laboratory model, your task is to calculate the constant velocity of the bar (sliding down the ramp on rails in a vertical magnetic field) as a function of the mass of the bar, the strength ofthe magnetic field, the angle of the ramp from the horizontal, the length of the bar (which is the same asthe distance between the rails), and the resistance of the bar. Assume that all of the other conductors inthe system have a much smaller resistance than the bar.a) If the force due to the changing flux exactly cancells out the net force due to the combination of gravity and normal force, then the bare will cease to accelerate and instead move at a constant velocity. Please solve for this velocity algebraically.b)Write out the units for each of your variables and show (by cancellation and substitution) that the units for your veloctiy will be m/s on both left and right side of your equation. Express as simply as possible with a rational denominator. 1/root13 What was the main reason for building the Suez Canal? The normal curve with a mean of 0 and standard deviation of 1 is called? Which country had the biggest influence on thehistory of the Indian subcontinent?A. The United StatesB. GermanyC. Great BritainD. China Supporters of the New Jersey plan What is your volume of the object?30 cm335 cm342 cm354 cm3 What nationality were the terrorists that blew up the Alfred P. Murrah FederalBuilding in Oklahoma City?A.SudaneseB.Saudi ArabianC.SyrianD.American How are the solutions to the inequality -2x 10 different from the solutions to -2x > 10?Explain your reasoning. In grammar what is, an affix?