The maximum speed of the car is 24.3 m/s
Explanation:
For a car moving along an unbanked turn, the frictional force provides the centripetal force required to keep the car in circular motion. Therefore, we can write:
[tex]\mu mg = m\frac{v^2}{r}[/tex]
where the term on the left is the frictional force while the term on the right is the centripetal force, and where
[tex]\mu=0.40[/tex] is the coefficient of friction between the tires and the road
m is the mass of the car
[tex]g=9.8 m/s^2[/tex] is the acceleration of gravity
v is the speed of the car
r = 150 m is the radius of the curve
Solving for v, we find the (maximum) speed at which the car can move along the turn:
[tex]v=\sqrt{\mu gr}=\sqrt{(0.40)(9.8)(150)}=24.3 m/s[/tex]
For speed larger than this value, the frictional force is no longer enough to keep the car along the turn.
Learn more about circular motion:
brainly.com/question/2562955
brainly.com/question/6372960
#LearnwithBrainly
Final answer:
On a rainy day, the maximum speed at which a curve with a radius of 150 m can be safely negotiated is 12.43 m/s. This calculation is based on the centripetal force provided by the friction between the tires and the road surface.
Explanation:
To determine the maximum speed at which the curve can be safely negotiated, we need to consider the centripetal force acting on the car. The centripetal force is provided by the friction between the tires and the road surface. The formula for centripetal force is Fc = mv²/r, where m is the mass of the car, v is the velocity, and r is the radius of the curve.
On a rainy day, the coefficient of friction between the tires and the road is given as 0.40. The maximum frictional force is given by the equation Ff = μN, where μ is the coefficient of friction and N is the normal force.
Since the normal force is equal to the gravitational force acting on the car, we can calculate it using N = mg, where m is the mass of the car and g is the acceleration due to gravity.
To find the maximum speed, we need to equate the centripetal force and the frictional force: mv²/r = μN. We can rearrange this equation to solve for the maximum velocity v: v = sqrt(μrg).
Substituting the given values, v = sqrt(0.40 * 9.8 * 150) = 12.43 m/s.
In which situation is the object experiencing unbalanced forces?
Question 1 options:
A. A box resting on a horizontal floor
B. A car slowing as it reaches a stop light
C. A car with its cruise control set to 50 mph
D. A rocket sitting on the launch pad
B. A car slowing as it reaches a stop light
Explanation:
According to Newton's second law, the net force exerted on an object is equal to the product between its mass and its acceleration:
[tex]F=ma[/tex]
where
F is the net force
m is the mass of the object
a is its acceleration
This means that when an object is experiencing unbalanced forces ([tex]F\neq 0[/tex]), it must have a non-zero acceleration. Therefore, let's analyze the different options:
A. A box resting on a horizontal floor --> FALSE. Here the acceleration is zero, so no unbalanced forces.
B. A car slowing as it reaches a stop light --> TRUE. Since the car is slowing down, its velocity is changing, so the acceleration is non-zero and there are unbalanced forces.
C. A car with its cruise control set to 50 mph --> FALSE. Here the velocity is constant, so no acceleration and no unbalanced forces.
D. A rocket sitting on the launch pad --> FALSE. Here the rocket is stationary, so no acceleration, and no unbalanced forces.
Learn more about Newton's second law:
brainly.com/question/3820012
#LearnwithBrainly
An object experiences unbalanced forces when the resultant force on it is non-zero. A car slowing as it reaches a stop light experiences unbalanced forces due to the brakes exerting a force, causing it to decelerate. Hence, the correct answer is B. A car slowing as it reaches a stop light.
In the question, we are asked to determine in which situation an object is experiencing unbalanced forces. An object experiences unbalanced forces when the resultant force acting on it is non-zero, leading to a change in its motion. If we analyze the options given:
A box resting on a horizontal floor is not experiencing unbalanced forces, because it is at rest and there are no net forces acting to change its state of motion (assuming no frictional losses).A car slowing as it reaches a stop light is experiencing unbalanced forces because the brakes are exerting a force opposite to the direction of motion, causing the car to decelerate.A car with its cruise control set to 50 mph is travelling at a constant velocity, indicating that the forces are balanced.A rocket sitting on the launch pad is not experiencing unbalanced forces if it is stationary and not in the process of takeoff.Therefore, the correct answer is B. A car slowing as it reaches a stop light, because this is when it is experiencing a net force that is causing a change in its motion.
A roller coaster engineer is trying to design a new coaster to build at the theme park. The cars, when loaded with people, is expected to have a mass of 8000. He wants his roller coaster cars to be going 10 m/s when it reaches the bottom. Assuming that friction is negligible, how high up should the roller coaster start?
_________Number ___M___Units
Then Answer
Well, it turns out that friction is not negligible, the Engineer figured out that the car is going to lose 32000 Joules energy as it goes down the track. this means that he has to start up even higher. what is the actual starting height after taking into account the energy loss from friction?
__________Number _____M____Units
Thank you SOO much :D
1) The initial height of the roller coaster must be 5.1 m
2) The height of the roller coeaster must be 5.5 m
Explanation:
1)
We can solve this problem by using the law of conservation of energy.
In fact, in absence of frictional force, the total mechanical energy must be conserved, so we can write:
[tex]KE+PE = KE'+PE'[/tex]
where
KE = 0 is the initial kinetic energy, at the top (the car starts from rest, so it has zero speed and so zero kinetic energy)
PE = mgh is the initial potential energy, where
m = 8000 kg is the mass of the car
[tex]g=9.8 m/s^2[/tex] is the acceleration of gravity
h is the initial height
[tex]KE'=\frac{1}{2}mv'^2[/tex] is the kinetic energy of the car at the bottom, where
v' = 10 m/s is the speed of the car at the bottom
PE' = 0 is the potential energy at the bottom (where h = 0)
Re-writing the equation with all the values and solving for h, we find the initial height of the track:
[tex]h=\frac{v^2}{2g}=\frac{10^2}{2(9.8)}=5.1 m[/tex]
2)
In this case, we also have to take into account the energy lost due to friction. So the equation of conservation of energy becomes
[tex]KE+PE = KE'+PE'+W[/tex]
where
W = 32,000 J is the work done by friction
Re-arranging the equation and solving again for h, we find:
[tex]mgh = \frac{1}{2}mv'^2 + W\\h=\frac{v^2}{2g}+\frac{W}{mg}=5.1+\frac{32,000}{(8000)(9.8)}=5.5 m[/tex]
Learn more about kinetic energy and potential energy:
brainly.com/question/1198647
brainly.com/question/10770261
brainly.com/question/6536722
#LearnwithBrainly
d) A wire carrying a current of 10A and 2m in length is placed in a field of flux density
0. 15T. Calculate the force on the wire if it is placed:
i) At 300
to the field
ii) Along the field (4 mks)
1) The force on the wire is 1.5 N
2) The force on the wire is zero
Explanation:
1)
The force experienced by a current-carrying wire in a magnetic field is given by
[tex]F=ILB sin \theta[/tex]
where
I is the current in the wire
L is the length of the wire
B is the magnetic flux density
[tex]\theta[/tex] is the angle between the direction of the wire and of the field
In this part of the problem we have
I = 10 A
L = 2 m
B = 0.15 T
[tex]\theta=30^{\circ}[/tex]
Substituting, we find
[tex]F=(10)(2)(0.15)(sin 30^{\circ})=1.5 N[/tex]
2)
As before, the force experienced by the wire is
[tex]F=ILB sin \theta[/tex]
where
I is the current in the wire
L is the length of the wire
B is the magnetic flux density
[tex]\theta[/tex] is the angle between the direction of the wire and of the field
In this case, however, the angle between the wire and the field is
[tex]\theta=0^{\circ}[/tex]
And therefore
[tex]sin 0^{\circ} = 0[/tex]
which means that the wire does not experience any force. In fact, the force experienced by the wire is zero when the wire is parallel to the field (such as in this case) and maximum when the wire is perpendicular to the field.
Learn more about magnetic fields:
brainly.com/question/3874443
brainly.com/question/4240735
#LearnwithBrainly
What distance will a car traveling 65km/hr travel in 3 hours
Answer:
it will cover 195km in 3 hours
What is Snell law of refraction
Answer:
Snell's law tells us the degree of refraction and relation between the angle of incidence, the angle of refraction and refractive indices of given pair of media. We know that light experiences the refraction or bending when it travels from one medium to another medium. Snell's law predicts the degree of the bend.
Explanation:
Final answer:
Snell's law expresses the relationship between the incidence and refraction angles and the indices of refraction of two media, represented by the equation n₁ sin θ₁ = n₂ sin θ₂.
Explanation:
Snell's law describes the relationship between angles and indices of refraction when light passes from one transparent medium to another.
It is an essential concept in the study of optics and can be mathematically expressed as n₁ sin θ₁ = n₂ sin θ₂, where n₁ and n₂ are the refractive indices of the first and second medium, respectively, and θ₁ and θ₂ are the angles of incidence and refraction.
This law is named after the Dutch mathematician Willebrord Snell who described it in 1621, but it was also discovered by the Arabian physicist Ibn Sahl in the 10th century.
Through thorough experiments, it became evident that light rays change direction due to the differing speeds of light in various media, a concept Snell himself was not aware of but was able to confirm through the refractive indices.
an object weighs 50 N on Jupiter and another object weighs 50 N on the earth. Which has greater mass?
The object on Earth has greater mass
Explanation:
The weight of an object is given by
[tex]W=mg[/tex]
where
W is the weight
m is the mass of the object
g is the strength of the gravitational field at the location of the object
The strength of the gravitational field on Jupiter ([tex]g_J[/tex]) is much larger than that on Earth ([tex]g_E[/tex]), so we can write
[tex]g_J > g_E[/tex]
The weight of the first object on Jupiter is
[tex]W_J = m_1 g_J = 50 N[/tex] (1)
where [tex]m_1[/tex] is the mass of the first object, while the weight of the second object on Earth is
[tex]W_E = m_2 g_E = 50 N[/tex] (1)
while [tex]m_2[/tex] is the mass of the second object.
By dividing eq.(1) by (2), we get
[tex]\frac{m_1 g_J}{m_2 g_E}=1\\\frac{m_1}{m_2}=\frac{g_E}{g_J}[/tex]
And since [tex]g_J > g_E[/tex], this means that [tex]m_2 > m_1[/tex], so the object on Earth has greater mass.
Learn more about forces and weight:
brainly.com/question/8459017
brainly.com/question/11292757
brainly.com/question/12978926
#LearnwithBrainly
Andre really likes his new car, and he knows it has a certain amount of mechanical energy. Which types of energy are included in the mechanical
energy of the car? Choose the two that apply.
A. electrical energy from the battery
B. kinetic energy from any movement the car has
C. potential energy based on its position
D. thermal energy from when fuel burns in the engine
Option - B and Option - C are correct.
We have Andre's new car.
We have to determine what types of Energies are included in the Mechanical energies of the car.
What is Mechanical Energy?The energy possessed by an object due to its motion or its position is called Mechanical Energy.
According to the question -
The Mechanical energy of the new car would include the following two types of energy -
Kinetic Energy of Car - The kinetic energy of the car is the energy possessed by the car by virtue of its motion. Mathematically -[tex]$E(K) = \frac{1}{2} mv^{2}[/tex]
Potential Energy of Car - The potential energy of the car is due to its position. Assume that the car of mass 'm' is parked over the mountain at height 'h'. Then its potential energy will be -U(h) = mgh
Hence, Option B and C are correct.
To learn more about Mechanical Energy, visit the link below-
https://brainly.com/question/14127859
#SPJ2
if you are traveling at 75 km/h how long will it take to travel 32 km?
The time taken is approximately 26 minutes
Explanation:
The motion of the body in this problem is a uniform motion (= at constant velocity), therefore we can use the following equation:
[tex]v=\frac{d}{t}[/tex]
where
v is the speed
d is the distance covered
t is the time taken
In this problem, we have
v = 75 km/h is the speed
d = 32 km is the distance to be covered
Solving for t, we find the time needed:
[tex]t=\frac{d}{v}=\frac{32}{75}=0.43 h[/tex]
Converting into minutes,
[tex]t=0.43 h \cdot 60 = 25.8 min \sim 26 min[/tex]
Learn more about speed:
brainly.com/question/8893949
#LearnwithBrainly
Nichrome has a --------------melting piont
Answer:
Nichrome has __High__melting piont
Hope this helps
Answer:
high melting point
Nichrome is consistently silvery-grey in colour, is corrosion-resistant, and has a high melting point of about 1,400 °C (2,550 °F).
Explanation:
A truck accelerates to a velocity of 38 m/s over 755 m of road
1) The acceleration is [tex]0.96 m/s^2[/tex]
2) The time taken is 39.6 s
Explanation:
1)
Since the motion of the truck is a uniformly accelerated motion (=constant acceleration), we can use the following suvat equation:
[tex]v^2-u^2=2as[/tex]
where
v is the final velocity
u is the initial velocity
a is the acceleration
s is the distance covered
For the truck in this problem,
u = 0 (it starts from rest)
v = 38 m/s
s = 755 m
Solving for a, we find the acceleration:
[tex]a=\frac{v^2-u^2}{2s}=\frac{38^2-0}{2(755)}=0.96 m/s^2[/tex]
2)
For this part we can use the following suvat equation
[tex]v=u+at[/tex]
where
v is the final velocity
u is the initial velocity
a is the acceleration
t is the time taken for the velocity to change from u to v
In this problem,
u = 0
v = 38 m/s
[tex]a=0.96 m/s^2[/tex]
Solving for t,
[tex]t=\frac{v-u}{a}=\frac{38-0}{0.96}=39.6 s[/tex]
Learn more about accelerated motion:
brainly.com/question/9527152
brainly.com/question/11181826
brainly.com/question/2506873
brainly.com/question/2562700
#LearnwithBrainly
The truck's acceleration, starting from rest to a velocity of 38 m/s over 755 m, is approximately 0.956 m/s². It takes about 39.75 seconds to cover this distance.
a. To determine the acceleration of the truck, we can use the kinematic equation:
v^2 = u^2 + 2as
where:
v = final velocity (38 m/s),
u = initial velocity (0 m/s since the truck was initially at rest),
a = acceleration,
s = displacement (755 m).
Rearranging the equation to solve for acceleration (a), we get:
a = (v^2 - u^2) / (2s)
Substitute the given values:
a = (38^2 - 0^2) / (2 * 755)
a = 1444 / 1510
a ≈ 0.956 m/s^2
b. To find the time taken (t), we can use the kinematic equation:
v = u + at
Since the truck started from rest (u = 0), this simplifies to:
t = v / a
Substitute the values:
t = 38 / 0.956
t ≈ 39.75 s
For more such information on: acceleration
https://brainly.com/question/460763
#SPJ6
The question probable may be:
A Truck accelerates to a velocity of 38 m/s over 755 m of road.
a. If the truck was initially at rest, what was its acceleration?
b. How long willthe truck take to travel this distance?
Which of the following properties did Rutherford use in his experiment?
A. the negative charge of the alpha particles and the random distribution of protons
B. the negative charge of the alpha particles and the positive charge of the gold foil
C. the positive charge of the alpha particles and the negative charge of the electrons
D. the positive charge of the electrons in a uniform negative charge
Answer:
(C) The positive charge of the alpha particles and the negative charge of the electrons are the properties Rutherford used in his experiment
Explanation:
In his scattering experiment, scientist Ernest Rutherford used the property of positively charged alpha particles and negatively charge electrons. He performed this experiment by passing some of the alpha particles through a gold foil. The result was that the some alpha particles scattered while some passed through the gold foil without collision.
He concluded that the alpha particles are centrally positively charged and needed a large amount repelling force. This experiment of Rutherford is also known as Rutherford model of atom. This experiment helped him in doing so many other discoveries.
Imagine a place in the cosmos..far from all gravitational and frictional influences..Suppose that you visit that place (just suppose)...and throw a rock.
What will the rock do? Why?
After the initial push, the rock will keep moving forever at constant velocity (constant speed in a straight line)
Explanation:
We can answer this question by using Newton's first law of motion:
"An object at rest (or in motion at constant velocity) will stay at rest (or will keep moving at constant velocity) unless acted upon unbalanced forces" (Law of inertia)
In this problem, we have a rock in a place very far from any force that can act on it. This means that there are no unbalanced force acting on it, so the rock will keep its state of motion forever.
In this situation, the rock is initially thrown by the astronaut. After the initial push, which accelerates the rock up to a certain velocity, there will be no more forces acting on the rock. This means that the rock will continue moving at a constant velocity forever, so at a constant speed in a straight line.
Learn more about Newton laws of motion:
brainly.com/question/11411375
brainly.com/question/1971321
brainly.com/question/2286502
brainly.com/question/2562700
#LearnwithBrainly
A rock is dropped from a cliff.
What will eventually happen to the rock's motion?
A. Gravity will cause the rock to slow down before it reaches Earth.
B. Air resistance will cause the rock to accelerate as it falls.
C. The rock will continue falling until Earth exerts a contact force on the rock.
D. Friction will cause the rock to continue in its state of motion.
Answer:
C
Explanation:
A toy car has an initial acceleration of 2 m/s" across a horizontal surface after it is released from rest. After the car travels for a timet
consisting of only the car an open system or a closed system, and why?
Open system because the acceleration of the car is not constant.
Open system, because an external force is applied to the car that causes it to accelerate.
Closed system, because the speed of the car is as expected in the case where an object has uniform acceleration for a timet
Closed system because mechanical energy was not removed from the system as a result of a net force
Rie
B
7:53 PM
12/11/2019
The car is considered as an open system, because an external force is applied to the car that causes constant acceleration of car. Hence, option (B) is correct.
The system isolated from its surrounding is known as closed-system. While, in an open system, the flow of information between the system and surrounding takes place, to cause any change in the system.
As per the concept of open and closed system:
The given problem indicates that car has initial acceleration of [tex]2 \;\rm m/s^{2}[/tex], travels for time t . Which means the car is accelerating constantly.And for a constant acceleration, there must be some external force acting on the car.Hence, the car must be considered an an open system, because the acceleration of car is related with the force, which is being applied from the outside of frame of reference.
Thus, we can conclude that considering only car is an open system because external force is applied to the car that causes it to accelerate. Hence, option (B) is correct.
Learn more about open and close physical system here:
https://brainly.com/question/20677320?referrer=searchResults
A Tesla Roadster car accelerates from rest at a rate of 7.1m/s for a time of 3.9s
Calculate the distance it travels in this time.
The distance covered is 54.0 m
Explanation:
Since the motion of the car is a uniformly accelerated motion, we can use the following suvat equation:
[tex]s=ut+\frac{1}{2}at^2[/tex]
where
u is the initial velocity
t is the time
a is the acceleration
s is the distance covered
For the car in this problem, we have
u = 0 (it starts from rest)
[tex]a=7.1 m/s^2[/tex] is the acceleration
t = 3.9 s is the time
Substituting, we find s:
[tex]s=0+\frac{1}{2}(7.1)(3.9)^2=54.0 m[/tex]
Learn more about accelerated motion:
brainly.com/question/9527152
brainly.com/question/11181826
brainly.com/question/2506873
brainly.com/question/2562700
#LearnwithBrainly
Allison needs to graph the yearly average snowfall in Alaska. She should use a:
A)bar graph
B)line graph
Answer: Line graph
Explanation:
Allison needs to graph the yearly average snowfall in Alaska. She should use a:
pie chart
pictograph
bar graph
line graph
a jet has a mass of 40000 kilograms the thrush pushing force of each of the four engines is 20000 Newtons what is the Jets acceleration when taking off
Need help with 3 and 4
3) The boulder travelled for a distance of 10 m
4) The work done on the car is zero
Explanation:
3)
The work done by a force on an object is given by:
[tex]W=Fd cos \theta[/tex]
where
F is the magnitude of the force
d is the displacement
[tex]\theta[/tex] is the angle between the direction of the force and of the displacement
In this problem we have:
F = 24 N
W = 240 J
[tex]\theta=0^{\circ}[/tex], assuming that the force is applied in the same direction as the displacement
Therefore, we can find d, the displacement of the boulder:
[tex]d=\frac{W}{F cos \theta}=\frac{240}{(24)(cos 0)}=10 m[/tex]
4)
As in the previous exercise, the work done is
The work done by a force on an object is given by:
[tex]W=Fd cos \theta[/tex]
In this problem, we have:
F = 9000 N is the force applied
d = 0 is the displacement, since the car has not moved
Therefore, the work done on the car is
[tex]W=(9000)(0)(cos 0)=0[/tex]
So, no work is done on the car.
Learn more about work:
brainly.com/question/6763771
brainly.com/question/6443626
#LearnwithBrainly
A force does work on a 50 g particle as the particle moves along the following straight paths in the xy-plane: 25 J from (0 m, 0 m) to (5 m, 0 m); 35 J from (0 m, 0 m) to (0 m, 5 m); -5 J from (5 m, 0 m) to (5 m, 5 m); -15 J from (0 m, 5 m) to (5 m, 5 m); and 20 J from (0 m, 0 m) to (5 m, 5 m).
Is this a conservative force?
If the zero of potential energy is at the origin, what is the potential energy at (5m, 5m)?
1) Yes, it is a conservative force
2) The potential energy at (5m, 5m) is 20 J
Explanation:
1)
A force is defined to be conservative if the work done by the force when moving an object does not depend on the path taken, but only on the initial and final position of the object.
Let's verify if this condition is met for the force in this problem:
- For going from (0 m, 0 m) to (5 m, 5 m), the work done is 20 J (A)
Then we can go from (0 m, 0 m) to (5 m, 5 m) through a different path:
- from (0 m, 0 m) to (5 m, 0 m) (work done: 25 J)
- from (5 m, 0 m) to (5 m, 5 m) (work done: -5 J)
Total work done in the second path: 25 J + (-5 J) = 20 J --> same as (A)
We can also go from (0 m, 0 m) to (5 m, 5 m) through a different path:
- from (0 m, 0 m) to (0 m, 5 m) (work done: 35 J)
- from (0 m, 5 m) to (5 m, 5 m) (work done: -15 J)
Total work done in the third path: 35 J + (-15 J) = 20 J --> same as (A)
So, the force is conservative, since the work done does not depend on the path taken.
2)
For a conservative force, the change in potential energy of the object moved by the force is equal to the work done by the force in moving the object from A to B.
Here have:
Point A: (0m, 0m)
Point B: (5m, 5m)
So, the change in potential energy is equal to the work done from A to B:
[tex]W=\Delta U = U_B-U_A[/tex]
where
[tex]U_B[/tex] is the potential energy in point B
[tex]U_A[/tex] is the potential energy in point A
In this problem, the potential energy at the origin (point A) is zero, so
[tex]U_A = 0[/tex]
Also we know that the work done is
W = 20 J
So, we find
[tex]U_B = W+U_A = 20 + 0 = 20 J[/tex]
Learn more about potential energy:
brainly.com/question/1198647
brainly.com/question/10770261
#LearnwithBrainly
The force exerted is not conservative as different amounts of work are being done to move the particle along different paths between the same points. Potential energy isn't defined in the usual sense because the force isn't conservative, but if taken as the average of the works done, the potential energy at (5,5) could be taken as 20J.
Explanation:A conservative force is defined as one in which the work done on a particle by the force as the particle moves from one point to another is independent of the path taken. Specifically, in the case of a conservative force, the work done is only dependent on the initial and final positions. In the given scenario, different amounts of work are being done to move the particle along different paths between the same points. This indicates that the force is not a conservative one.
The potential energy at a point in a field due to a conservative force is equal to the work done by the force to move the particle from a reference point (in this case, the origin point) to that point. Since the force in this scenario isn't conservative, potential energy isn't defined in the usual sense. Nevertheless, if we insist on measuring it, we could take the average of the works done: for instance, between (0,0) and (5,5) the works done are 35+(-15)=20 and -5+25=20, so we could say the potential energy at (5,5) is 20J considering the origin as the reference point with zero potential energy.
Learn more about Conservative Force and Potential Energy here:https://brainly.com/question/33853278
#SPJ11
Most of the Earth's volume is contained in the
A. mantle
B.
crust
C.
inner core
D.
outer core
Most of the Earth's volume is contained in the "mantle". The correct answer would be option (A).
What is a mantle?The mantle is a layer of semi-solid rock that lies between the Earth's thin crust and its liquid outer core. The mantle is approximately 2,900 kilometers (1,800 miles) thick and makes up about 84% of the Earth's total volume.
The crust, mantle, and core are the three coatings of the Earth. The crust is made up of minerals and solid rocks. The mantle lies under the crust and is largely made up of solid rocks and minerals, but it is punctured by pliable patches of semi-solid magma.
It is composed primarily of silicate rocks and is considered to be the source of the Earth's heat and most of its volcanic activity.
The mantle also plays a key role in plate tectonics, which is the theory that explains the movement of the Earth's continents and ocean floor.
Thus, the correct answer would be option (A) mantle.
Learn more about the mantle here:
https://brainly.com/question/11096614
#SPJ6
The combination of foods and beverages that constitute an individual’s complete dietary intake over time is known as
Eating Pattern
Mediterranean Diet
Dietary Guidelines
Healthy Intake
Answer:
The combination of foods and beverages that constitute an individual’s complete dietary intake over time is known as Eating pattern.
So, option A is the correct answer.
Explanation:
The Eating pattern is also called Dietary Pattern. Normal eating pattern may be three meals a day, may increased or changed according to the individual, and may refer to overeating.
Dietary guidelines are nutritional guidelines which advice an individual, greater than 2 years, consume a healthy and nutritional diet.
Mediterranean diet is the diet typical to Mediterranean countries, in which there is high consumption of vegetables, fruits, seeds, legumes, nuts and olive. It consists of moderate amounts of carbohydrates and proteins and a moderate to high amount of fats.
A healthy intake is a healthy diet in which the energy from sugars is less than 10% of the total energy intake.
Hence, Option A is the correct answer.
A 1500kg car, moving at a speed of 20m/s comes to a halt. How much work was done by the brakes?
The work done by the brakes is [tex]-3.0\cdot 10^5 J[/tex]
Explanation:
According to the work-energy theorem, the work done by the brakes on the car is equal to the change in kinetic energy of the car. Therefore:
[tex]W=K_f - K_i = \frac{1}{2}mv^2-\frac{1}{2}mu^2[/tex]
where
W is the work done
m is the mass of the car
v is the final speed
u is the initial speed
For the car in this problem, we have:
m = 1500 kg
u = 20 m/s
v = 0 (the car comes to a halt)
Substituting, we find the work done:
[tex]W=0-\frac{1}{2}(1500)(20)^2=-3.0\cdot 10^5 J[/tex]
And the work is negative because the brakes apply a force in the opposite direction to the motion of the car.
Learn more about work:
brainly.com/question/6763771
brainly.com/question/6443626
#LearnwithBrainly
Can someone explain the gas laws?
* ex...what happens to pressure if volume and temp. increase*
Explanation:
Use the Ideal Gas Law:
PV = nRT
where P is absolute pressure,
V is volume,
n is number of moles,
R is the universal gas constant,
and T is absolute temperature.
First, identify which variables in the problem are constant (note that R is always a constant).
Next, solve for the constants and use that equation to write a proportion.
Finally, plug in the given values and solve for the unknown variable.
For example, if n and R are the constants:
nR = PV/T
Therefore:
P₁V₁/T₁ = P₂V₂/T₂
2057 Q.No. 9 a A typical car weighs about 1200 N. If the
coefficient of rolling friction is ur = 0.015. What horizontal
force is needed to make the car move with constant speed of
72 km/h on a level road? Also calculate the power developed
by the engine to maintain this speed.
Ans. 18 N, 360 W
Answer:
18N & 360W
Explanation:
Here,
Velocity of car (v) = 72 ∗ 1000 / 60∗60 = 20m/s
weight of car = 1200N
We have,
μr = Fs / R
Fs = μr ∗ R = 0.015 ∗ 1200 = 18N
Power developed by the engine = 18 ∗ 20 =360W
Hope this helps!!!3. Consider a locomotive and the rest of a freight train to be a single object. Suppose the locomotive is pulling the train up a hill. Describe the action and reaction forces that cause the locomotive to move up the hill, such as the reaction force and gravity.
This question has been posted before put the answers were not correct.
Answer:
Action - Pulling up the train.
Reaction - Friction on the locomotive
Explanation:
Locomotive is pulling the train upwards ,
Which is the action force applied by the locomotive,
As a reaction locomotive will be pulled by the train which is the reaction of pulling
Now, considering it as a action on locomotive , friction force will act on it as a reaction upwards which will result to move it upwards.
For train action is pulling up by locomotive and reaction will be friction acting on it downwards.
if you travel for three hours of a speed of 30 km/h, how far will you go?
Answer:
90km
Explanation:
every hour you travel 30km and you are traveling 3 hours 30×3
As the skydiver falls to Earth, she experiences positive acceleration due to
If the airman had a mass of 80 kg, find the magnitude of the air drag acting on him when he reached terminal velocity of 54 m/s
The magnitude of the air drag is 784 N
Explanation:
An object falling down reaches the terminal velocity when the magnitude of the air drag acting on it becomes equal to the weight of the object. Mathematically, this condition can be written as:
[tex]F_D = mg[/tex]
where
[tex]F_D[/tex] is the magnitude of the air drag
m is the mass of the object
g is the acceleration of gravity
In this problem, we have
m = 80 kg is the mass of the airman
[tex]g=9.8 m/s^2[/tex] is the acceleration of gravity
Substituting into the formula, we find:
[tex]F_D = (80)(9.8)=784 N[/tex]
Learn more about forces here:
brainly.com/question/8459017
brainly.com/question/11292757
brainly.com/question/12978926
#LearnwithBrainly
A deputy sheriff rides a horse while directing traffic, what energy is being used?
Answer:
Kinetic Energy
Explanation:
In relation to the question, as the sheriff rides a horse, the sheriff is in motion and a body in motion is said top possess kinetic energy.
Kinetic energy is that energy of the body that it gains due to the motion or speed of the body which it gains and maintains.
In other words, we can say that the amount of work needed to accelerate an object from its position of rest and set it into motion at some certain velocity.
What is used to measure heat?
change in temperature
constant temperature
constant specific heat
change in specific heat
Answer:
change in temperature
Answer:
Change in temperature
Explanation:
did this on edge yesterday and that was the answer