A satellite with a mass of 5.6 E 5 kg is orbiting the Earth in a circular path. Determine the satellite's velocity if it is orbiting at a distance of 9.8 E 5 m above the Earth's surface. Earth's mass = 5.98 E 24 kg; Earth's radius = 6.357 E 6 m.

Answer:

D. Asthenosphere

Explanation:

The asthenosphere is relatively plastic part of the mantle which underlies the brittle lithosphere. In the asthenosphere, it is generally believed that the rocks are in ductile state and easily moves. It is the site of convection within the earth. In mantle convection, hot and light materials rises and keeps moving into upper crustal levels till they solidify. Here also, cold and denser materials sinks deeper till they turn to melt. This differences in temperature and density sets up a convective cell within the mantle. Several convective cells are in the mantle.

Answer:

C. has no effect on validity

Explanation:

Repeating your experiment has no effect on validity.

It doesn't matter how many times you repeat your experiment. You have to find the average outcome of each experiment you do.

Answer:

A. Splitting water into hydrogen and oxygen.

Explanation:

A chemical change produces a new substance. ... A physical change does not produce a new substance. Changes in state or phase (melting, freezing, vaporization, condensation, sublimation) are physical changes.

Splitting water into hydrogen and oxygen.

Answer:

0

Explanation:

Forces with equal magnitudes and opposite directions cancel each other out, so the net force is 0.

Answer:

0

Explanation:

when you try to give two equal force on object in opposite side, the object will not move.hence the net force will be zero

mark me as brainliest please

Explanation:

Centripetal acceleration = acceleration due to gravity

v² / r = GM / r²

Solving for velocity:

v = √(GM / r)

Given:

G = 6.67×10⁻¹¹ m³/kg/s²

M = 5.97×10²⁴ kg

r = 6.38×10⁸ m + 1.44×10⁹ m = 2.078×10⁹ m

v = √(6.67×10⁻¹¹ × 5.97×10²⁴ / 2.078×10⁹)

v = 438 m/s

Period is the time to travel one circumference:

T = 2πr / v

T = 2π (2.078×10⁹) / 438

T = 2.98×10⁷ s

T = 8290 hr

T = 345 days

Answer:

34 m/s

Explanation:

Centripetal acceleration is:

a = v² / r

Given a = 6.55 × 9.8 m/s² = 64.2 m/s², and r = 18 m:

64.2 m/s² = v² / (18 m)

v = 34 m/s

The speed of the centrifuge is 34 m/s.

Answer:

34 m/s

Explanation:

They almost entirely reside within galaxies because quasars are a subset of blackholes with a large and fast enough accretion disk to generate a beam of interstellar material perpendicular to itself. This typically only occurs in the largest black holes at the center of galaxies (supermassive blackholes) or at least stellar black holes---which still occur within galaxies because the material is necessary to form them.

Explanation:

Evaluate in the x direction to find the time it takes to land:

x = x₀ + v₀ₓ t + ½ aₓ t²

17.5 = 0 + (15 cos 40) t + ½ (0) t²

t = 1.52

Evaluate in the y direction to find the initial height:

y = y₀ + v₀ᵧ t + ½ g t²

0 = h + (15 sin 40) (1.52) + ½ (-9.8) (1.52)²

h = -3.32

The cliff is actually 3.32 meters below where it lands.  Make sure you copied the problem correctly.

Engineers and others who work with technology use science (A) to predict possible outcomes.

Answer:

A. science

Explanation:

Engineers and others who work with technology use science to predict possible outcomes.

They use predictions based on what the scientific research has shown them.

Answer:

0.0979 kg/m³

Explanation:

Treating air as an ideal gas:

PV = nRT

n/V = P/RT

Density depends on both pressure and temperature.  If we assume the temperature is constant, we can say that density is directly proportional to pressure.

ρ = kP

ρ/P = k

Writing a proportion:

(1.26 kg/m³) / (7720 mmHg) = ρ / (600 mmHg)

ρ = 0.0979 kg/m³

Answer:

[tex]\rho = 0.098 kg/m^3[/tex]

Explanation:

As we know that for ideal gas we will have

[tex]PV = nRT[/tex]

here we can convert it into the form of density

[tex]PV = \frac{m}{M}RT[/tex]

now we have

[tex]PM = \rho RT[/tex]

now if the temperature will remain constant then in that case

[tex]\frac{P}{\rho} = constant[/tex]

so we will have

[tex]\frac{P_1}{P_2} = \frac{\rho_1}{\rho_2}[/tex]

here we can plug in all values in it

[tex]\frac{7720}{600} = \frac{1.26}{\rho}[/tex]

now we have

[tex]\rho = \frac{600}{7720}(1.26)[/tex]

[tex]\rho = 0.098 kg/m^3[/tex]

Answer:

X-rays

Gamma rays

Explanation:

The electromagnetic waves are arranged in order of their frequencies and wavelengths. This arrangement forms the electromagnetic spectrum. The x-rays and gamma rays form the part of the spectrum with highest frequencies and least wavelength. In the order of decreasing frequency and increasing wavelength, we start with Gamma rays ,x-rays uv, Visible light, Infrared light,Microwave then radio waves.

Answer:

X rays and Gamma rays.

Explanation:

The electromagnetic waves are arranged in the increasing frequency and energy  while decreasing wavelength. So the waves on the right side of ultraviolet spectrum having higher frequency and energy and lower wave length. such as X RAYS AND GAMMA RAYS. Electromagnetic wave spectrum is arranged as.

Radio waves,  microwaves,  infrared waves,  visible rays, ultraviolet waves,  x rays, gamma rays.

Answer:

When people move from one culture to another they carry their background and culture with them, it is responsible for shaping their perception and adjustment to a new culture. Culture shock is a common experience for the people who have moved the new country or region, it includes confusion, shock, and disorientation.  Extreme homesickness, avoiding social situations, physical complaints, and sleep difficulties are other symptoms of Cultural shock. However, there are strategies to deal with it. The strategies are to be open-minded and curious, using the observation skills and asking questions. By being open-minded you can change your values according to other cultures, by using your observation skills you can get a complete picture of what is going on in the new environment and by asking  questions you can easily understand others and can make yourself understood.

Answer:

the branch of mechanics that deals with the motion of air and other gases and with the effects of such motion on bodies in the medium.Compare aerostatics(def 1).

Explanation:

Answer:

Aerodynamics is the way air moves around things.

Answer:

the Third option

Explanation:

Answer:

It will decrease to one-sixth the original force.

Explanation:

The electrical force is given by :

[tex]F=k\dfrac{q_1q_2}{r^2}[/tex]..............(1)

Where

k is the electrostatic constant

r is the distance between charges

One charge is decreased to one-third of its original value,  and a second charge is decreased to one-half of its  original value.

i.e. [tex]q_1'=\dfrac{q_1}{3}[/tex]

and [tex]q_2'=\dfrac{q_2}{2}[/tex]

New force is given by :

[tex]F'=k\dfrac{q_1q_2}{6r^2}[/tex]

[tex]F'=\dfrac{F}{6}[/tex]

So, the new force will decrease to one-sixth the original force. Hence, the correct option is (c).

The answer of this question maybe false

Answer:

False

Explanation: the Doppler effect is the

an increase (or decrease) in the frequency of sound, light, or other waves as the source and observer move toward (or away from) each other.

Answer:

I think it's self inductance, but without knowing the options I'm not certain.

Answer:

induction

Explanation:

Answer:

A.  Moving the mass from Point C to B, although it involves a greater distance, requires less force to do the same amount of work.

Explanation:

The amount of work will be the same either way.  By going from C to B, the mover will exert less force over a greater distance, which is easier than exerting a greater force over a shorter distance.

We have that the beam of light that emerges from water into air at an angle that  bends

Away from the normal

Option B is correct

Normal of a Plane

In geometry, a normal is an object such as a line, ray, or vector that is perpendicular to a given object. The normal line to a plane curve at a given point is the line perpendicular to the tangent line to the curve at the point.

Therefore it is seen From the Question Image that

The Beam is NOT bent

But Rather

Away from the normal.

In conclusion

The beam of light that emerges from water into air at an angle that  bends

Away from the normal

Option B is correct

For more information on this visit

https://brainly.com/question/10664419

Explanation:

The sources of tax revenue  for federal,state and local government is personal income ,payroll and sales.

Government take some taxes if the income of person is beyond a specified limit.That limit is specified by government itself.

Government  also take some taxes from sales product.

When public or enterprises pay payment online then government take some taxes.

Answer:

3.842 g/cm³

Explanation:

Three forces are acting on the solid: weight, normal force (apparent weight), and buoyancy.

∑F = ma

N − m g + ρf V g = 0

N − ρs V g + ρf V g = 0

ρs is the density of the solid and ρf is the density of the fluid it is submerged in.

Writing normal force in terms of apparent mass, N = mₐ g:

mₐ g − ρs V g + ρf V g = 0

mₐ − ρs V + ρf V = 0

mₐ = ρs V − ρf V

mₐ = V (ρs − ρf)

V = mₐ / (ρs − ρf)

Volume is constant, so:

mₐ / (ρs − ρf) = mₐ / (ρs − ρf)

277.5 / (ρ − 0.0) = 212.5 / (ρ − 0.9)

Cross multiply and solve:

212.5ρ = 277.5 (ρ − 0.9)

212.5ρ = 277.5ρ − 249.75

249.75 = 65ρ

ρ = 3.842

The density of the solid is 3.842 g/cm³.

Answer:

BC and DE

Explanation:

In the given figure, the velocity time graph is shown. We know that the area under v-t curve gives the displacement of the particle.

Area under AB, [tex]d_1=\dfrac{1}{2}\times 2\times 10=10\ m[/tex]

Area under BC, [tex]d_2=\dfrac{1}{2}\times 2\times 4=4\ m[/tex]

Area under CD, [tex]d_3=\dfrac{1}{2}\times 2\times 7=7\ m[/tex]

Area under DE, [tex]d_4=\dfrac{1}{2}\times 2\times 4=4\ m[/tex]

Area under EF, [tex]d_5=\dfrac{1}{2}\times 2\times 3=3\ m[/tex]

So, form above calculations it is clear that, during BC and DE undergo equal displacement. Hence, the correct option is (c) "BC and DE = 4 meters".

Correct Answer:

AB & DE

Explanation:

I had just taken this test on Plato/Edmentum (physical science) and gotten the question correct

Average speed is total distance traveled divided by time. It is a scalar quantity (just magnitude).

Average velocity is displacement divided by time. It is a vector quantity (magnitude and direction).

An average velocity is different from average speed as average velocity is calculated using total displacement and total time into consideration.

Explanation:

The average velocity is calculated using the total displacement and total time, whereas the average speed is calculated using the total distance and total time.

“Average velocity is a vector quantity” and thus takes the magnitude and direction of vector displacement in calculation. Average speed is scalar quantity.

[tex]\text {Average velocity}=\frac{\text {Total displacement}}{\text {Total time}}[/tex]

Answer:

1.414

Explanation:

Snell's law states:

n₁ sin θ₁ = n₂ sin θ₂

where n is the index of refraction and θ is the angle of incidence (relative to the normal).

The index of refraction of air is approximately 1.  So:

1 sin 45° = n sin 30°

n = sin 45° / sin 30°

n = 1.414

Round as needed.

Answer:

B

Explanation:

The apple is less dense than the water but not enough so to float with the least amount of apple submerged

Answer: Option B

Explanation: First, density is defined as mass/volume, so for two objects with the same volume, the more dense one has more weight.

Here we see that the apple is less dense than the water, which means that the water is heavier than the apple.

This means that only a tiny part of the apple will be submerged in the water (where the displaced water/profundity of the apple depends on the size of the apple,  the displaced water must have the same weight than the apple, in that point the forces are canceled a the apple will be at rest)

The correct option is B

Answer:

Mass=0.143 kg

Explanation:

From the Newton's second law of motion the force applied to an object is directly proportional to the acceleration produced and the acceleration is in the direction of the force.

F=ma where F is the force, m is the mass of the object and a i the acceleration.

m=F/a

=4.719N/33 m/s²

=0.143 kg

Answer:

New Moon

The Moon's position in space at New Moon.

New Moon is the first primary phase and it occurs the moment when the Sun and Moon are aligned, with the Sun and Earth on opposite sides of the Moon.

A New Moon cannot normally be seen from Earth since only the dark side of the Moon faces our planet at this point. Sometimes, if the New Moon is close to the Lunar nodes of its path, it can cause a Solar Eclipse.

The greatest difference between high and low tide, also known as spring tides, takes place around New Moon and Full Moon.

Waxing Crescent Moon

The moment a thin sliver of the Moon becomes visible after New Moon is the beginning of the first intermediate phase, the Waxing Crescent Moon.

In the past, this used to be called New Moon while the darkest phase was called Dark Moon. This traditional definition of New Moon is still in use in some cultures, defining the beginning of the months for instance in the Islamic calendar.

The rest of the Moon is also sometimes faintly visible during most of this phase because Earth also reflects sunlight onto the Moon, a phenomenon called earthshine.

First Quarter Moon

First Quarter Moon is the second primary phase.

First Quarter Moon is the second primary Moon phase and it is defined as the moment the Moon has reached the first quarter of its orbit around Earth, hence the name. It is also called Half Moon as we can see exactly 50% of the Moon's surface illuminated. Whether you see the left or right half illuminated, depends on several factors, including your location.

The smallest difference between high and low tide, also known as neap tides, occurs around the 2 Quarter Moons.

Waxing Gibbous Moon

The second intermediate phase, the Waxing Gibbous Moon, lasts until the next primary phase. Waxing means that it is getting bigger. Gibbous refers to the shape, which is larger than the semicircle shape of the Moon at First Quarter, but smaller than a full circle.

Full Moon

Full Moon is the brightest phase.

@timeanddate.com

The Full Moon appears in the night sky when the Sun and the Moon are aligned on opposite sides of Earth.

How can Full Moon be in the daytime?

Technically, this alignment only lasts a moment. However, the Moon can appear to be full a day before or after while more than 98% of the Moon's disc is illuminated.

When a Full Moon occasionally passes through Earth's shadow, it will cause a lunar eclipse.

When the Full Moon comes close to the points of its orbit that are closest or farthest away from Earth, we call it a Supermoon or Micromoon, respectively.

What is the Moon Illusion?

Waning Gibbous Moon

The next intermediate Moon phase is the Waning Gibbous Moon. The portion of the visible half of the Moon illuminated decreases during this period.

Third Quarter Moon

Third Quarter Moon is the last primary phase.

The Third Quarter Moon occurs the moment the opposite half of the Moon is illuminated compared to the First Quarter Moon.

Waning Crescent Moon

The Waning Crescent Moon. The Sun illuminates less than half of the visible part of the Moon during this Moon phase and you can sometimes see earthshine on the rest of the Moon towards the end.

Explanation:

Answer:

The new Moon appears during a period when the earth, the Moon,  and the Sun are all in a single line. Since the Moon is in between the Sun ad the Earth , the side of the Moon that directly facing the Earth is dark.

During full Moon, the three bodies  are also approximately in a line, but  the moon at this stage is on the other side of earth, so the Sun lights up the the section of the earth facing it.

At first quarter and last quarter, the Moon is located at a position perpendicular to a line between Earth and the Sun. one section of the moon is dark while the other will be brightened

Crescent refers to phases where the less than half of the moon is illuminated while gibbous is the phase where  more than half of the moon is illuminated.

After the new Moon phase, The waxing crescent is visible due to exposure some reflected sunlight rays . The lunar crescent continue to grow until first-quarter Moon. As the right section of the Moon extend to more than half of the Moon's face, the Moon becomes waxing gibbous.

Then, right after the full Moon, the right section begins to reduce again to make a waning gibbous and which then turn into a third-quarter Moon. The exposure to sunlight continues to lessen until the moon is a waning crescent and then a new Moon. The full cycle is carried out in  29.5 days.

Final answer:

You exert a type of contact force called normal force when you stomp your foot on the ground, related to Newton's Third Law of Motion. While running or jogging, forces on the feet can be significantly greater, up to 2.5 times your body weight. The pressure results from your body mass, additional weight, and the surface area of the foot that makes contact.

Explanation:

When you stomp your foot on the ground, you are exerting a type of contact force known as a normal force. This action is governed by Newton's Third Law of Motion, which states that for every action, there is an equal and opposite reaction. Therefore, when your foot pushes against the ground, the ground pushes back with equal force. This force is a result of the pressure exerted by the stomp, which is a combination of the mass of your body and any additional weight you're carrying, and the surface area of your foot in contact with the ground.

When you're running or jogging, especially on hard surfaces or with insufficiently padded shoes, the forces on your feet and legs are significantly greater. They can be up to 2.5 times your body weight. This force can be calculated using the mass of the leg, the velocity at which it moves, and the distance over which it stops. Your own body weight also contributes to the force exerted on the ground during such activities. Proper foot arches help in absorbing this shock and reducing the impact on the rest of the body. When the downward motion of a runner's leg is stopped abruptly, the force required can be large and is impactful compared to the weight of the jogger.

Answer:

C

Explanation:

The mechanical advantage is always less than 1 because the force needed to move an object is always greater than the weight of the object.

Answer:

It is always less than 1.

Explanation:

True, scientists often talk to each other to figure out if their results were similar and what they could have done better.

Although, talking to other scientists does have risks, other scientists could copy your work and further better it.

So, your final answer is TRUE, sorry for the long answer, I needed to have a word count about 20 characters and then I got carried away! lol