900 grams of lead can be added max to the tin so that it does not sink.
Explanation:
According to the Archimedes principle, an object will not sink in a medium until the density of the object exceeds the density of the medium.
The medium we have is water.
The density of medium(water) is given as ρ° = 1 g/cm³
Density of an object is simply its mass contained per unit volume.
Density = mass/volume
Volume of the tin = v = 1000 cm³
Mass of the tin = m = 100 g
Mass of lead that can be added without sinking = x
Total mass after adding lead in the tin = Mt = m + x
Total density after lead is added to the tin is given as:
ρt = (m+x)/v
Now, according to Archimedes principle, lead can be added to the tin until the density of tin is equal to the density of water.
ρt = ρ°
Mt/v = ρ°
(m + x)/v = ρ°
⇒ (100 + x)/1000 = 1
⇒ 100 + x = 1000
⇒ x = 1000 - 100
x = 900 g
Keyword: Archimedes principle
Learn more about Archimedes principle from https://brainly.com/question/10589409
#learnwithBrainly
The tendency of a physical object to remain still or continue moving, unless a force is applied is called
find the amount of energy transfered to a box that you are pushing if it required 720 watts of power to push the box for 6 seconds
The amount of energy transferred is 4320 J
Explanation:
Power is defined as the amount of energy transferred per unit of time:
[tex]P=\frac{E}{t}[/tex]
where
P is the power
E is the amount of energy transferred
t is the time
In this problem, we have:
P = 720 W is the power
t = 6 s is the time elapsed
Solving for E, we find the energy transferred needed to push the box:
[tex]E=Pt=(720)(6)=4320 J[/tex]
Learn more about power:
brainly.com/question/7956557
#LearnwithBrainly
a race track has a length of 0.750 miles. How many inches is this? One mile equals 5280 feet
A race track has 47520 inches.
Explanation:
Given that,
Length if the race track is 0.750 miles.
We know that, one mile is 5280 feet.
One feet is 12 inches.
To convert length of the track from miles to inches follow these steps:
Step 1:
Convert into feet:
Multiply 0.750 miles to 5280 feet.
Then the race track’s length is 3960 feet.
Step 2:
Convert into inch:
Multiply 3960 feet to 12 inches.
Then the race track’s length is 47520 inches.
Therefore, length of the race track in inches is 47520 inches.
Answer:
for physics the answer is 47500
Debbie plotted a graph to show how the mass of aluminium rivets affected the distance the cup moved down.
Use the graph (attached) to find the mass that made the cup move down 4mm.
Answer:
26
Explanation:
Why do elements in groups share more chemical properties than elements in a period
Answer:
Elements in a period share the highest unexcited electron energy level. There are more elements in some periods than others because the number of elements is determined by the number of electrons allowed in each energy sub-level.
Explanation:
150c passes through cell in 30 seconds. cell has a potential difference of 12v. what is current in the circuit
The current in the circuit is 5 A
Explanation:
The intensity of current is given by the equation:
[tex]I=\frac{q}{t}[/tex]
where
I is the current
q is the amount of charge passing through a given point of the circuit in a time interval of t
For the cell in this problem, we have
q = 150 C is the charge
t = 30 s is the time interval
Substituting into the equation, we f ind
[tex]I=\frac{150}{30}=5 A[/tex]
Learn more about current:
brainly.com/question/4438943
brainly.com/question/10597501
brainly.com/question/12246020
#LearnwithBrainly
help me with this problem please
Answer:
Total moment of inertia when arms are extended: 1.613 [tex]kg\,m^2[/tex]
Explanation:
This second part of the problem could be a pretty complex one, but if they expect you to do a simple calculation, which is what I imagine, the idea is just adding another moment of inertia to the first one due to the arms extended laterally and use the moment of inertia for such as depicted in the image I am attaching.
In that image:
L is the length from one end to the other of the extended arms (each 0.75m from the center of the body) which gives 1.5 meters.
m is the mass of both arms. That is: twice 5% of the mass of the person: which mathematically can be written as: 2 * 0.05 * 56.5 = 5.65 kg
Therefore this moment of inertia to be added can be obtained using the formula shown in the image:
[tex]I_z=\frac{1}{12} \,m\,L^2\\\\I_z=\frac{5.65\,*\,1.5^2}{12} \\I_z=1.05937\,kg\,m^2[/tex]
Now, one needs to add this to the previous moment that you calculated, resulting in:
0.554 + 1.059 = 1.613 [tex]kg\,m^2[/tex]
A baseball has a mass of 0.45 kg and is thrown with a speed of 25 m/s. What is the momentum of the baseball?
0.018 kg • meters squared per second
11 kg • meters per second
56 kg • meters per second
140 kg • meters per second
Answer:
The second option: 11 kg * m/s
Explanation:
Recall that linear momentum is defined as the product of the mass times its velocity, therefore in this case, the mass is 0.45 kg , and the speed is 25 m/s, therefore the linear momentum is:
P = m * v = 0.45 Kg * 25 m/s = 11.25 kg * m/s
So roundng the answer to the nearest whole number, you get 11 kg * m/s, which is the second option they give you.
Answer:
11 kg • meters per second
Explanation:
Maverick and goose are flying a training mission in their F-14. They are flying at an altitude of 1500 m and are traveling at 688 m/s (mach 2) . They release their bomb and head for home. How long will it be before the bomb hits the ground?
Answer:
The bomb will remain in air for 17.5 s before hitting the ground.
Explanation:
Given:
Initial vertical height is, [tex]y_0=1500\ m[/tex]
Initial horizontal velocity is, [tex]u_x=688\ m/s[/tex]
Initial vertical velocity is, [tex]u_y=0(\textrm{Horizontal velocity only initially)}[/tex]
Let the time taken by the bomb to reach the ground be 't'.
So, consider the equation of motion of the bomb in the vertical direction.
The displacement of the bomb vertically is [tex]S=y-y_0=0-1500=-1500\ m[/tex]
Acceleration in the vertical direction is due to gravity, [tex]g=-9.8\ m/s^2[/tex]
Therefore, the displacement of the bomb is given as:
[tex]S=u_yt+\frac{1}{2}gt^2\\-1500=0-\frac{1}{2}(9.8)(t^2)\\1500=4.9t^2\\t^2=\frac{1500}{4.9}\\t=\sqrt{\frac{1500}{4.9}}=17.5\ s[/tex]
So, the bomb will remain in air for 17.5 s before hitting the ground.
Would anybody be able to help me complete this sentence?
Thanks
Answer:
x-axis
Explanation:
when it is at rest, horizontal, on a graph it is the x-axis.
Hope this helped!
The resistance of several materials are shown in the table. Based on this, which material has the best conductivity? Material Resistance (ohms) Aluminum 0.0000000282 Carbon (Graphite) 0.000035 Germanium 0.46 Silicon 640
A. aluminum
B.Carbon (Graphite)
C.Germanium
D.Silicon
Answer:
it is A aluminum
Explanation:
Answer:
Aluminium has best conductivity
So option (a) will be correct answer
Explanation:
We have given material resistance of of different material
Aluminium = 0.0000000282 ohm
Carbon = 0.000035
Germanium = 0.46 ohm
And silicon = 640 ohm
We know that resistance is the opposition in flow of current and conductivity of the material is inversely proportional to the resistance
So the material which has less Resistance will have high conductivity
As aluminium has less resistance so it will have high conductivity
So option (a) will be correct answer
If Galileo's experiment did not measure the speed of light, what did it measure?
the speed of light using large distances
man's reaction time
actual speed of light in the air
the speed of light over a short distance
If Galileo's experiment did not measure the speed of light, it measures man's reaction time.
Option B
Explanation:
Galileo was very keen to find out speed of light, however there were some obstacles which he was facing. Before going ahead, let us understand his experiment.He asked his assistant to stand 3 miles away in night, and light a lantern, and both receded time - when assistant started lantern, and when Galileo saw the lantern light up. However, the timing was same. They tried with 6 miles. Again same timings. Let us look at obstacles. First was as the speed is very high, the calculations were sensitive in micro and Nano units. Considering that he need to maintain the accuracy of even micro and Nano seconds, he have to take account in man's reaction time. As there is some time gap in receiving the signal, and processing by brain, and then transmitting the signal to react accordingly, which is known as reaction time. So if he is able to add/subtract reaction time.Answer:
Galileo's experiment measured mans reaction time.
Explanation:
Questions to consider:
1. If the skater has a mass of 60 kg, what is her gravitational potential energy at the top of the 4 m high
half-pipe?
The potential energy of the skater is 2352 J
Explanation:
The gravitational potential energy of a body is the energy possessed by the body due to its position in a gravitational field. Near the Earth's surface, it can be calculated as
[tex]PE=mgh[/tex]
where
m is the mass of the body
[tex]g=9.8 m/s^2[/tex] is the acceleration of gravity near the Earth's surface
h is the height of the body relative to the ground
For the skater in this problem,
m = 60 kg
h = 4 m
Substituting, we find her potential energy:
[tex]PE=(60)(9.8)(4)=2352 J[/tex]
Learn more about gravitational potential energy:
brainly.com/question/1198647
brainly.com/question/10770261
#LearnwithBrainly
What is the main difference between
sulfate and sulfide minerals?
Answer:
Sulfate
The sulfate or sulphate (see spelling differences) ion is a polyatomic anion with the empirical formula SO2−4. Sulfate is the spelling recommended by IUPAC, but sulphate is used in British English. Salts, acid derivatives, and peroxides of sulfate are widely used in industry. Sulfates occur widely in everyday life. Sulfates are salts of sulfuric acid and many are prepared from that acid.
Sulfide
Sulfide (systematically named sulfanediide, and sulfide(2−)) (British English sulphide) is an inorganic anion of sulfur with the chemical formula S2− or a compound containing one or more S2− ions. It contributes no color to sulfide salts. As it is classified as a strong base, even dilute solutions of salts such as sodium sulfide (Na2S) are corrosive and can attack the skin. Sulfide is the simplest sulfur anion.
Answer:
Sulfates are salts of sulfuric acid and many are prepared from that acid. Sulfide is an inorganic anion of sulfur with the chemical formula S2− or a compound containing one or more S2− ions.What causes an object to change its motion?
Answer:
An unbalanced force.
Explanation:
Teacher: "An object in motion will stay in motion unless..."
Auggie : "Acted on by an unbalanced force."
Teacher: "Very good."
When there is just a horizontal velocity for a projectile and another case in which there is a horizontal velocity and vertical velocity for a projectile that launches at an angle, are the horizontal velocities going to remain the same?
Answer:
The horizontal velocities of the projectile for both cases are going to remain the same.
Explanation:
Taking the horizontal direction as x-axis and the vertical component as y-axis.
Let V be the object's velocity and θ be the angle formed with the horizontal.
Therefore,
The horizontal component of velocity is,
[tex]V_{x}=V Cos\theta[/tex]
[tex]V_{y}=V Sin\theta[/tex]
Due to the force of gravity the vertical component of velocity changes. But there is no influence of force in the horizontal component other than the air resistance.
Hence, the horizontal component of the velocities of the projectile remains the same.
In order for an object to have kinetic energy it must have a mass and a ?
Answer:
Velocity
Explanation:
The mechanical energy of the body is defined as the sum of the potential energy and kinetic energy.E = P.E + K.E
The potential energy of a body is due to the height from the surface of the earth.P.E = mgh
The kinetic energy of the is possessed by the body due to the virtue of its motion,K.E = ½ mv²
If there is no velocity associated with the body, there is no K.E in the body.If a car is traveling at an average speed of 60 kilometers per hour how long does it take to travel 12 kilometers
Answer:
The time taken to travel is, t = 12 minutes
Explanation:
Given data,
The speed of the car, v = 60 km/h
The distance of travel, d = 12 km
The time taken for the travel is t = ?
The speed is defined as the distance divided by the time taken to travel. The formula for speed is,
v = d/t
∴ t = d/v
t = 12 km / 60 km/h
t = 0.2 h
t = 12 minutes
Hence, the time taken to travel is, t = 12 minutes.
Given that the average speed of the car is 60 km/hr and it needs to travel a distance of 12 km, it will take the car around 0.2 hours, which is equivalent to 12 minutes, to travel this distance.
Explanation:This problem is related to the concept of speed, which in physics, is the distance covered per unit time. Here, we are asked to find the time so, we will use the formula for calculating time which is Time = Distance / Speed.
Given:
Average speed of the car = 60 km/hrDistance to be covered = 12 kmSo, time needed can be calculated as:
Time = Distance / Speed
Time = 12 km / 60 km/hr
This gives Time = 0.2 hr.
But as we generally count time in minutes, we can convert hours into minutes. Since 1 hour = 60 minutes, therefore, 0.2 hr = 0.2 x 60 = 12 minutes.
So, it takes 12 minutes to travel 12 kilometers with an average speed of 60 kilometers per hour.
Learn more about Speed Calculation here:https://brainly.com/question/19930939
#SPJ3
All of the following would be questions that could be scientifically investigated except:
Answer:
"What is the best advice a parent can give a child?"
Explanation:
The other answers have one clear response. Ex: Orange popsicles melt faster than grape popsicles. That would be a fact.
But parental advice can vary, depending on your opinion. I may say that all parents must teach their children not to talk to strangers, while someone else may say that parents should advice their kids to treat everyone fairly. Nothing can be proven as the only appropriate response.
Hope this helps!
Consider this situation: A baseball player dives head-first into second base and slows down while sliding on the infield dirt.
Of the forces listed, identify which act upon the player.can be more then one answer
a. Normal Force
b. Gravity Force
c. Applied Force
d. Friction Force
e. Tension Force
f. Air Resistance Force
The forces that act upon a baseball player diving head-first into second base and sliding on the infield dirt are the Normal Force, Gravity Force, and Friction Force.
Explanation:When a baseball player dives head-first into second base and slows down while sliding on the infield dirt, several forces act upon the player. These forces include:
Normal Force: The ground exerts an upward force on the player, preventing them from sinking into the ground.Gravity Force: The force that pulls the player downward towards the center of the Earth.Friction Force: The force between the player and the infield dirt that opposes their motion and slows them down.Air Resistance Force: This force is negligible in this situation because the player is sliding on the ground.Therefore, the correct answers would be a. Normal Force, b. Gravity Force, d. Friction Force.
Learn more about Forces here:https://brainly.com/question/13191643
#SPJ5
Determine the volume displaced and then calculate the density of this 54 g sample of brass.
To determine the volume displaced by the 54 g sample of brass, use the water displacement method and calculate the density by dividing the mass by the volume.
Explanation:To determine the volume displaced by the 54 g sample of brass, you need to use the water displacement method. Submerge the brass sample in water and measure the volume of water displaced. The volume of water displaced will be equal to the volume of the brass sample. Then, to calculate the density of the brass sample, divide the mass of the sample (54 g) by the volume of the sample.
For example, if the volume of water displaced is 30 mL, then the volume of the brass sample is also 30 mL. The density of the brass sample would be calculated as 54 g/30 mL = 1.8 g/mL.
Thunder and lightning may become connected in the mind because they often occur together. This is an example of which of the following?
A.
Law of similarity
B.
Law of conditioning
C.
Law of stimuli
D.
Law of continuity
Answer:
Thunder and lightning may become connected in the mind because they often occur together. This is an example of (A) law of similarity
Explanation:
"Gestalt law of similarity" states that objects or things that shares visual characteristics like shape, size, color, texture, value and orientation can be perceived as a unified group.
Thus thunder and lightning can be placed in the same group as lightning causes thunder. When passing from the clouds to that of the surface, a lightning strike pops open up a little void in the atmosphere, called a channel. After the lightning has disappeared, the atmosphere falls back in and produces a sound wave we perceive as a thunder.
Answer:
d. continuity
Explanation:
The law of continuity says that two events can become connected to each other if they happen close together. For example, thunder and lightning may become connected in the mind because they often occur together.
A brick of dimensions (10×7×5) cm3 lying
On the ground exerts a Force of 5 newton , find of what condition the brick exerts more pressure, in horizontally or vertically and how much ?
Please give me answer..plss
Answer:
The 'b x h' side of the brick exerts more pressure on the ground, P = 1428.57 N/m²
Explanation:
Given data,
The dimension of the brick, l = 10 cm = 0.1 m
b = 7 cm = 0.07 m
h = 5 cm = 0.05 m
The force exerted by the brick on ground, F = 5 N
The brick has three 2 x 3 sides, b x h, l x h, and l x b
The area of the side, A₁ = b x h
= 0.07 x 0.05
= 0.0035 m²
The area of the side, A₂ = l x h
= 0.1 x 0.05
= 0.005 m²
The area of the side, A₃ = 0.1 x 0.07
= 0.007 m²
The pressure exerted by the surface A₁ on the ground, P₁ = F/A₁
= 5 / 0.0035
= 1428.57 N/m²
The pressure exerted by the surface A₁ on the ground, P₂ = F/A₂
= 5 / 0.005
= 1000 N/m²
The pressure exerted by the surface A₁ on the ground, P₃ = F/A₃
= 5 / 0.007
= 714.29 N/m²
Hence, the 'b x h' side of the brick exerts more pressure on the ground, P = 1428.57 N/m²
what is not a component of skill related fitness
Answer:
flexibility
Explanation:
A particular isotope of plutonium has 94 protons, ____
neutrons, and a mass number of 241.
A particular isotope of plutonium has 94 protons, 147 neutrons, and a mass number of 241.
Explanation:
An atom is identified by two numbers:
Atomic number: it is equal to the number of protons contained in the nucleus. It is indicated with the letter ZMass number: it is equal to the sum of protons and neutrons in the nucleus. It is indicated with the letter AMathematically, this can be rewritten as
[tex]Z=p[/tex]
[tex]A=p+n[/tex]
where
p is the number of protons
n is the number of neutrons
For the isotope of plutonium in this problem, we have
[tex]Z=p=94[/tex], since it has 94 protons
[tex]A=p+n=241[/tex] (mass number)
From the second equation we get
[tex]n=241-p[/tex]
And substituting [tex]p=94[/tex], we find the number of neutrons:
[tex]n=241-94=147[/tex]
Learn more about atoms:
brainly.com/question/2757829
#LearnwithBrainly
Answer:
92, 147, 227
Explanation:
got it right on edge2022
If angle between two plane mirrors is 120 degrees then how many images were formed
Explanation:
The number of images formed by a pair mirrors kept at an angle [tex]\alpha[/tex] is
[tex]n=\frac{360}{\alpha } -1[/tex] if [tex]\frac{360}{\alpha }[/tex] comes even.
[tex]n=\frac{360}{\alpha }[/tex] if [tex]\frac{360}{\alpha }[/tex] comes odd.
where [tex]n[/tex] is the number of images formed.
In our question,
[tex]\alpha =120^{0}[/tex]
[tex]\frac{360}{\alpha } =\frac{360}{120}=3[/tex]
It is odd,so [tex]n=\frac{360}{120}=3[/tex]
a force 10N drags a mass 10 kg on a horizontal table with acceleration 0.2m\s. If the acceleration due to gravity is 10m\s2, a coefficient of friction between the moving mass and a table is?
Answer:
Explanation: 0.02
Recall: μ mg = ma
μ = ?
m = 10N
g = 10m\s2
a = 0.2m\s
Substituting the values , we have
μ x 10 x 10 = 10 x 0.2
100 μ = 2
μ = 2/100
μ = 1/50
μ = 0.02
μ = 0.02
Final answer:
The coefficient of friction between the mass and the table is calculated using Newton's second law and the formula for the coefficient of friction, which results in a value of 0.08.
Explanation:
Calculation of Coefficient of Friction
To calculate the coefficient of friction, we can use Newton's second law which states that force equals mass times acceleration (F = ma). Given that a force of 10 N is applied to a 10 kg mass and the resulting acceleration is 0.2 m/s², we can deduce that there must be a frictional force opposing the applied force. The equation simplifies to F = ma + frictional force (f). Plugging in the known values, we get 10 N = (10 kg)(0.2 m/s²) + f, which results in f = 10 N - (10 kg)(0.2 m/s²) = 10 N - 2 N = 8 N.
The weight of the mass can be calculated using weight = mass × gravity, which gives us a weight of (10 kg)(10 m/s²) = 100 N. The normal force on a horizontal surface is equal to the weight of the object, so it's also 100 N. The coefficient of friction (mu) is calculated using the formula mu = frictional force / normal force. Therefore, mu = 8 N / 100 N = 0.08.
The coefficient of friction between the mass and the table is 0.08.
to what height will a 250g soccer ball rise to if it is kicked directly upwards at 8 meters per second
Answer:
3.2 m
Explanation:
we know
Hmax = V²/2g
= 8² / 2*10 = 3.2
Answer:
The ball will get upto the height of 3.26 meters.
Explanation:
Initial velocity of the ball = u = 8 m/s
final velocity of the ball = v = 0 m/s ( upward)
Acceleration due to gravity ,a= -g =[tex]-9.8 m/s^2[/tex]
Height of the ball when kicked = s
Using third equation of motion :
[tex]v^2-u^2=2as[/tex]
[tex](0 m/s)^2-(8 m/s)^2=2\times (-g)\times s[/tex]
[tex](0 m/s)^2-(8 m/s)^2=2\times (-9.8)\times s[/tex]
[tex]s=\frac{(-8 m/s)^2}{2\times -9.8 m/s^2}=3.26 m[/tex]
The ball will get upto the height of 3.26 meters.
A bowling ball of mass 9 kg moves in a straight
line at 3.28 m/s.
How fast must a Ping-Pong ball of mass
3.638 g move in a straight line so that the two
balls have the same momentum?
Answer in units of m/s.
The velocity of the ping-pong ball must be 8109 m/s
Explanation:
The momentum of an object is given by
[tex]p=mv[/tex]
where
m is the mass of the object
v is its velocity
For the bowling ball, we have
m = 9 kg
v = 3.28 m/s
so its momentum is
[tex]p=(9)(3.28)=29.5 kg m/s[/tex]
We want the ping-pong ball to have the same momentum, so:
p' = 29.5 kg m/s
And the mass of the ping-pong ball is
m = 3.638 g = [tex]3.638\cdot 10^{-3} kg[/tex]
Therefore, its velocity must be:
[tex]v=\frac{p}{m}=\frac{29.5}{3.638\cdot 10^{-3}}=8109 m/s[/tex]
Learn more about momentum:
brainly.com/question/7973509
brainly.com/question/6573742
brainly.com/question/2370982
brainly.com/question/9484203
#LearnwithBrainly
The velocity of the Ping-Pong ball can be found by setting the momentum of the bowling ball equal to the momentum of the Ping-Pong ball and solving for its velocity. Using the given masses and velocities, we can calculate the velocity of the Ping-Pong ball in m/s.
Explanation:In order for two balls to have the same momentum, the momentum of the bowling ball must be equal to the momentum of the Ping-Pong ball. The momentum of an object is calculated by multiplying its mass by its velocity. Therefore, to find the velocity of the Ping-Pong ball, we can use the equation: momentum of bowling ball = momentum of Ping-Pong ball.
Given: mass of bowling ball = 9 kg, velocity of bowling ball = 3.28 m/s, mass of Ping-Pong ball = 3.638 g = 0.003638 kg (convert g to kg)
Momentum of bowling ball = mass of bowling ball × velocity of bowling ball
Momentum of Ping-Pong ball = mass of Ping-Pong ball × velocity of Ping-Pong ball
Setting the two momentum equations equal to each other, we can solve for the velocity of the Ping-Pong ball:
(9 kg) × (3.28 m/s) = (0.003638 kg) × (velocity of Ping-Pong ball)
Dividing both sides of the equation by 0.003638 kg will give us the velocity of the Ping-Pong ball:
velocity of Ping-Pong ball = (9 kg × 3.28 m/s) / 0.003638 kg
Calculating this expression will give us the velocity of the Ping-Pong ball in m/s.
Learn more about Finding the velocity of a Ping-Pong ball to have the same momentum as a bowling ball here:https://brainly.com/question/32187537
#SPJ3
Block mountains are caused by faults in the crust, where rocks can move past each other in a rift and rise. The uplifted blocks become block mountains (also known as horsts) while the intervening dropped blocks are known as graben (i.e. depressed regions). Which mountain range is formed this way
Answer : A, The Sierra Nevada mountain range of western North America, running along the eastern edge of the U.S. state of California.
Answer:
"The Sierra Nevada mountain range of western North America, running along the eastern edge of the U.S. state of California."
Explanation:
Block Mountains:
Due, to stress created in side the crust of the earth the blocks or pieces of land or mass of land is created. In the past due to natural disaster and events that occurred in the ancient world, left us with some natural phenomenons called as block mountains. As the natural forces like seismic waves and other volcanic eruptions leads to such a disastrous amount of force that uplifts the mass of land on which it is acted upon.
Characteristics of the Block Mountains:
The Block mountain have very sharp and jagged peaks.Types:
There are two main types of the block mountains,which are as below:
Lifted Mountain: Those mountains which are characterized by having two steps, as they are created by ancient and disastrous faults inside the earth crust. Tilted Mountains: These mountains or ranges are basically characterized by having a gentle slope at one side while also having a steep side on its other face.