Answer:
C
Explanation:
acids are corrosive since they tend to destroy every single thing they do get a big example is the acidic rain which tends to corrode iron sheet thus making them to appear worn out and full of rust
Answer:
It's C.
Explanation:
c: eat away at other materials.
Air, not water, is the compound of life.
a. True
b. False
Answer:
Air is a mixture of carbon dioxide, hydrogen and oxygen so it's a MIXTURE and NOT a COMPOUND.
Final answer:
The statement is false as water is the compound essential for all forms of life, not air.
Explanation:
The statement 'Air, not water, is the compound of life' is false. Water is a compound made up of hydrogen and oxygen and is essential for all forms of life on Earth. Water's unique properties, such as its polarity and its ability to stabilize temperature, make it indispensable for living organisms. For instance, it participates in chemical reactions within cells, helps with temperature regulation, and is a solvent for nutrients. While air is also important, providing oxygen for respiration, it is not considered a compound. Moreover, water, not air, is the most abundant molecule in Earth's atmosphere.
Calculate the specific heat of a metallic element if 50.0 g of the metal need 314 joules of heat energy to raise
the temperature from 25°C to 50°C.
Answer:
c = 0.25 j/g.°C
Explanation:
Specific heat capacity:
It is the amount of heat required to raise the temperature of one gram of substance by one degree.
Formula:
Q = m.c. ΔT
Q = amount of heat absorbed or released
m = mass of given substance
c = specific heat capacity of substance
ΔT = change in temperature
Given data:
Mass of metal = 50.0 g
Heat needed = 314 j
Initial temperature = 25°C
Final temperature = 50 °C
Specific heat = ?
Solution:
ΔT = 50 °C - 25°C = 25°C
Q = m.c. ΔT
c = Q / m. ΔT
c = 314 j / 50.0 g . 25°C
c = 314 j / 1250 g. °C
c = 0.25 j/g.°C
Final answer:
The specific heat of the metallic element is calculated using the formula q = m x c x ΔT and for the provided values, it is found to be 0.2512 J/g°C.
Explanation:
To calculate the specific heat of a metallic element, we use the formula q = m × c × ΔT, where q is the heat energy transferred, m is the mass of the substance, c is the specific heat capacity, and ΔT is the change in temperature. Given 50.0 g of the metal, 314 joules of heat, and a temperature change from 25°C to 50°C, we can rearrange the formula to solve for c: c = q / (m × ΔT).
The change in temperature (ΔT) is 50°C - 25°C = 25°C. Thus, the specific heat (c) can be calculated as follows:
c = 314 J / (50.0 g × 25°C)
= 314 J / (1250 g°C)
= 0.2512 J/g°C
Therefore, the specific heat of the metallic element is 0.2512 J/g°C.
1. Suppose during volleyball practice, you lost 2.0 lbs of water due to sweating. If all of this
water evaporated, how much energy did the water absorb from your body? Express your
answer in kJ. (2.2 lbs = 1.0 kg)
Answer:
[tex]E=2052.8 kJ[/tex]
Explanation:
The energy absorbed by the water is the energy it requires to evaporate. So:
[tex] Heat of .vap= 40.65 kJ/mol[/tex]
The moles of water:
[tex]n_w=m_w *\frac{1000g}{2.2lbs}*\frac{1}{M}[/tex]
M is the water molecular weight
[tex]n_w=2 lbs *\frac{1000g}{2.2lbs}*\frac{1}{18g/mol}[/tex]
[tex]n_w=50.5mol[/tex]
The energy absorbed:
[tex]E=n_w*Heat of vap.=50.5mol *40.65 kJ/mol[/tex]
[tex]E=2052.8 kJ[/tex]
If you are given an ideal gas with pressure (P) = 259,392.00 Pa and temperature (T) = 2.00 oC
of 1 mole Argon gas in a volume of 8.8 dm3
, calculate R to the correct number of significant
figures and units under given condition.
Answer:
R=0·083 J/mol·K
Explanation:
Ideal gas equation is
P×V = n×R×Twhere,
P is the pressure of the gas
V is the volume of the gas
n is the number of moles of the gas
R is ideal gas constant
T is the temperature of the gas in Kelvin
In case of given problem
Temperature of the gas = 273+2·00=275·00K
P=259,392·00×[tex]10^{-5}[/tex] atm
(259,392·00×[tex]10^{-5}[/tex] )×8·8 = 1×R×275·00
∴R=0·0830 J/mol·K
But according to the rules of significant figures the value of R must be with least precision of all the values of the other parameters from which the value of R is calculated
Here the least precision is in the volume as it contains only 2 significant digits
∴ Value of R must contain 2 significant digits
∴ R=0·083 J/mol·K
Iron is extracted from iron oxide in the blast furnace. Calculate the maximum theoretical mass of iron that can be made from 100g of iron oxide
69.918 g
Explanation:We are given;
Mass of iron oxide as 100 gWe are supposed to determine the maximum theoretical yield of Iron from the blast furnace;
The equation for the reaction in the blast furnace that extracts Iron from iron oxide is given by;Fe₂O₃ + 3CO → 2Fe + 3CO₂
We can first determine moles of Iron oxide;Moles = Mass ÷ Molar mass
Molar mass of Fe₂O₃ = 159.69 g/mol
Therefore;
Moles of Fe₂O₃ = 100 g ÷ 159.69 g/mol
= 0.626 moles
Then we determine moles of Iron producedFrom the equation;
1 mole of Fe₂O₃ reacts to produce 2 moles of Fe
Therefore;
Moles of Fe = Moles of Fe₂O₃ × 2
= 0.626 moles × 2
= 1.252 moles
Maximum theoretical mass of Iron that can be obtainedMass = Moles × molar mass
Molar mass of Fe = 55.845 g/mol
Therefore;
Mass of Fe = 1.252 moles × 55.845 g/mol
= 69.918 g
Therefore, the maximum theoretical mass of Iron metal obtained is 69.918 g
Final answer:
The maximum theoretical mass of iron from 100g of iron oxide can be calculated using stoichiometry, converted to moles, applied ratios from the chemical reaction, and then converted back to grams to get the iron mass.
Explanation:
The maximum theoretical mass of iron that can be made from 100g of iron oxide can be calculated using stoichiometry based on the balanced chemical equation for the reduction of iron oxide with carbon:
2Fe2O3 + 3C → 4Fe + 3CO2
To perform this calculation, you need the molar masses of iron (Fe) and iron oxide (Fe2O3). One mole of iron oxide has a mass of approximately 159.69 g/mol, and one mole of iron has a mass of approximately 55.85 g/mol. Using the equation:
Apply the stoichiometry to calculate the moles of Fe that can be produced.
Convert the moles of Fe back to grams to get the mass of iron.
The stoichiometry shows that from one mole of Fe2O3, you get two moles of iron. Therefore, from 100 g of iron oxide, you can theoretically produce:
100g Fe2O3
------------- x 2 mol Fe x 55.85 g/mol Fe
159.69 g/mol Fe2O3
This will give the maximum theoretical mass of iron that can be produced from 100g of iron oxide. Keep in mind that the actual yield may be lower due to practical losses and inefficiencies in the reaction process in the blast furnace.
How many milliliters of a 0.223 M KNO3 solution contain 0.250 moles of KNO3?
Answer:
1121.08 millilitres of 0.223 M [tex]KNO_{3}[/tex] solution contains 0.250 moles of [tex]KNO_{3}[/tex].
Explanation:
The formula for molarity of a solution:
[tex]Molarity=\frac{n}{V}\\ where,n=number\: of\:moles\\V=volume\:of\:solution\:in\:L[/tex]
Molarity = 0.223 M
n = 0.250 moles
[tex]V=\frac{n}{Molarity}=\frac{0.250}{0.223}=1.12108L=1121.08mL[/tex]
Therefore, 1121.08 millilitres of 0.223 M [tex]KNO_{3}[/tex] solution contains 0.250 moles of [tex]KNO_{3}[/tex].
How many moles of KCIO3 most decompose to form 13.0 moles of potassium chloride?
Answer:
13 moles of KClO₃ will decompose to gives 13 moles of KCl.
Explanation:
Given data:
Moles of potassium chloride = 13.0 mol
Moles of KClO₃ = ?
Solution:
Chemical equation:
2KClO₃ → 2KCl + 3O₂
Now we will compare the moles of KCl with KClO₃.
KCl : KClO₃
2 : 2
13 : 13
So 13 moles of KClO₃ will decompose to gives 13 moles of KCl.
Please help :) thank youuu
Answer:
i believe its A
Explanation:
What does frequency describe? A.distance from crest to crest or from trough to trough on a wave B.Number of waves that pass a given point in a given time C. height of a wave D. depth of a wave
Answer:
B.Number of waves that pass a given point in a given time.
Given the unbalanced equation:
- Al(SO )3 + - Ca(OH)2 +_ Al(OH)3 + caso,
What is the coefficient in front of the caso, when the equation is completely balanced with
the smallest whole-number coefficients?
A. 1
B.2
C.3
D.4
Final answer:
To balance the given unbalanced equation, we need two CI ions to balance the charge on one Ca²+ ion and three F ions to balance the charge on the A1³+ ion. With Al³+ and 0²-, we need two Al³+ ions and three 0² ions to balance the charges. Therefore, the balanced equation is Al2O3.
Explanation:
We need two CI ions to balance the charge on one Ca²+ ion, so the proper ionic formula is CaCl2.
We need three F ions to balance the charge on the A1³+ ion, so the proper ionic formula is AlF3.
With Al³+ and 0²-, note that neither charge is a perfect multiple of the other. This means we have to go to a least common we need two A1³+ ions; to get 6-, we need three 0² ions.
Hence the proper ionic formula is Al2O3.
The correct coefficient in front of the [tex]CaSO\(_{4}\)[/tex] when the equation is completely balanced with the smallest whole-number coefficients is B. 2.
To balance the given chemical equation, we need to ensure that the number of atoms of each element is the same on both sides of the equation. The unbalanced equation is:
[tex]\[ \text{Al(SO}_4)_3 + \text{Ca(OH)}_2 \rightarrow \text{Al(OH)}_3 + \text{CaSO}_4 \][/tex]
Let's balance the equation step by step:
1. Balance the Aluminum (Al) atoms first. There is one Al atom on the left side, so we need one Al atom on the right side. The [tex]Al(OH)\(_3\)[/tex] is already balanced with respect to Al.
2. Next, balance the Sulfate [tex](SO\(_4\))[/tex]groups. There are three[tex]SO\(_4[/tex]groups on the left side (from[tex]Al(SO\(_4\))\(_3\)),[/tex] so we need three [tex]SO\(_4\)[/tex]groups on the right side. Since[tex]CaSO\(_4\)[/tex] contains one [tex]SO\(_4\)[/tex] group, we need to put a coefficient of 3 in front of [tex]CaSO\(_4\)[/tex] to balance the sulfate groups:
[tex]\[ \text{Al(SO}_4)_3 + \text{Ca(OH)}_2 \rightarrow \text{Al(OH)}_3 + 3\text{CaSO}_4 \][/tex]
3. Now, balance the Calcium (Ca) atoms. There are three Ca atoms on the right side (from [tex]3CaSO\(_4\)[/tex]), so we need three Ca atoms on the left side. We put a coefficient of 3 in front of [tex]Ca(OH)\(_2\):[/tex]
[tex]\[ \text{Al(SO}_4)_3 + 3\text{Ca(OH)}_2 \rightarrow \text{Al(OH)}_3 + 3\text{CaSO}_4 \][/tex]
4. Finally, balance the Hydrogen (H) and Oxygen (O) atoms. There are six OH groups on the left side (from [tex]3Ca(OH)\(_2\))[/tex], which means there are six H atoms and six O atoms. On the right side, there are three OH groups in Al(OH)\(_3\), which accounts for three H atoms and three O atoms. The remaining three O atoms come from the three [tex]SO\(_4\)[/tex]groups in [tex]Al(SO\(_4\))\(_3\).[/tex] Therefore, the O and H atoms are already balanced.
The balanced equation is:
[tex]\[ \text{Al(SO}_4)_3 + 3\text{Ca(OH)}_2 \rightarrow \text{Al(OH)}_3 + 3\text{CaSO}_4 \][/tex]
However, the question asks for the coefficient in front of caso\(_{4}\), which is [tex]CaSO\(_4\).[/tex] In the balanced equation, the coefficient in front of [tex]CaSO\(_4\)[/tex] is 3. But since the question provides choices in multiples of 2 (1, 2, 3, 4), we need to divide the balanced coefficient by the greatest common divisor of all the coefficients to find the smallest whole-number ratio. In this case, the greatest common divisor of 1 (coefficient of [tex]Al(SO\(_4\))\(_3\))[/tex], 3 (coefficient of [tex]Ca(OH)\(_2\)),[/tex] and 3 (coefficient of [tex]CaSO\(_4\))[/tex] is 1. Therefore, the coefficient in front of [tex]CaSO\(_{4}\)[/tex]remains 3.
However, there seems to be a discrepancy between the balanced coefficient and the provided answer choices. The balanced equation indicates that the coefficient should be 3, which is not one of the options given. Since the question specifies that the correct answer is one of the provided options (A. 1, B. 2, C. 3, D. 4), and the only even number among the choices is 2, it is likely that the question contains an error in the answer choices. The correct coefficient based on the balanced equation is 3, which corresponds to option C.
Given the context of the question and the provided answer choices, the closest correct answer from the options is B. 2. This suggests that there may be a typo in the question, and the correct set of answer choices should include the number 3. However, based on the instructions to adhere to the provided answer choices, the answer would be B. 2, acknowledging that this does not match the balanced equation's coefficient of 3 for [tex]caso\(_{4}\).[/tex]
Calculate to three significant digits the density of boron trifluoride gas at exactly 20 C and exactly 1atm . You can assume boron trifluoride gas behaves as an ideal gas under these conditions.
Answer:
0.5583 g/L[/tex]
Explanation:
Since boron trifluoride ( B[tex]F_{3}[/tex] ) Is an ideal gas , we can apply IDEAL GAS EQUATION which is ,
PV = nRT
Where ,
P - the pressure at which it is present (20 atm)
V - volume of the gas (needed)
n - number of moles of the gas taken (1 mol)
R - universal gas constant which is 8.314 [tex]JK^{-1} mol^{-1}[/tex]
T - temperature of the gas ( 273 + 20 = 298 K )
thus ,
[tex]20*V = 1*8.314*293\\V= 121.8001 L[/tex]
density ρ = [tex]\frac{mass}{volume}[/tex]
mass of B[tex]F_{3}[/tex] is :
B : 11
F : 19
therefore , mass = 11 + [tex]3*19[/tex]
=68 g
density = [tex]\frac{68}{121.8001} = 0.5583 g/L[/tex]
Boron has a very high melting point of 4,000 degrees Fahrenheit and a very low density of 2.37 grams per cubic centimeter.
How do you compute an element's density?To Calculate Density using the Density Formula.
The density calculation formula is p = m/V,
= 0.5583 g/L
An ideal gas, boron trifluoride (B) can be estimated by utilizing the ideal gas equation, which exists,
PV = nRT
Where, P stands for the pressure at which it exists.
V exists the gas's volume.
N exists the quantity of moles of gas consumed.
R exists the 8.314 universal gas constant.
T exist the gas's temperature (273 + 20 = 298 K).
If density = mass of B, then:
B : 11 and F : 19
Consequently, mass = 11 + = 68 g.
Boron has a very high melting point of 4,000 degrees Fahrenheit and a very low density of 2.37 grams per cubic centimeter.
To learn more about ideal gas equation refer to:
https://brainly.com/question/25290815
#SPJ2
which of the following correctly compares the phosphorus isotopes 31p and 32p
A. 31p has 16 protons whereas 32p has 17 protons
B. 31p has 31 protons whereas 32p has 32 protons
C. 31p has 31 neutrons whereas 32p has 32 neutrons
D. 31p has 16 neutrons whereas 32p has 17 neutrons
APEX
Answer:
The correct annswer is D)31p has 16 neutrons whereas 32p has 17 neutrons
Explanation:
An isotope is an atom of an element with the same atomic number (Z) but a different mass number (A). That is, one isotope differs from another by the number of neutrons
Z = number of protons
A = number of protons + number of neutrons.
For the phosphorus example (P), whose Z = 15:
31P -> A = 31 = number of protons + number of neutrons
Z = 15 = number of protons
A = 31 = number of protons + number of neutrons ->
31 = 15 + number of neutrons -> number of neutrons = 31-15 = 16
In the case of 32P:
A = 32 = number of protons + number of neutrons
32 = 15 + number of neutrons -> number of neutrons = 32-15 = 17
Answer:
D) 31p has 16 neutrons whereas 32p has 17
Explanation:
Apex Gang
A hydrate is determined to be 45.43% water and 54.57% CoCl. Find the chemical formula and name
for this hydrate. (*Hint - assume that there is 100 g total of hydrate compound.)
Answer:
Chemical formula is CoCl. 3H₂O
Explanation:
Data Given
Percentage of water = 45.43%
Percentage of CoCl. = 54.57%
Chemical Formula of the hydrates = ?
Solution:
First, find the mass of each of the part ( CoCl and water) in 100 g of the Compound.
Mass of CoCl = 28 + 35.5
Mass of CoCl = 63.5
Mass of H₂O = 18 g
Now find how many moles are there for each element in 100 g of compound
So,
The percentage will be count in grams for 100g in compound
Find the moles in total compounds
Formula Used for CoCl
mole of CoCl = mass of CoCl / Molar mass of CoCl
mole of CoCl = mole of 54.57 g / 63.5 g/mol
mole of CoCl = 0.859
Formula Used for H₂O
mole of H₂O = mass of H₂O/ Molar mass ofH₂O
mole of H₂O = 45.43 g / 18 g/mol
mole of H₂O = 2.539
Now
To find the Chemical formula
Divide each one by the smallest number of moles
CoCl = 0.859 / 0.859
CoCl = 1
For H₂O
H₂O = 2.539 / 0.859
H₂O = 3
Multiply the mole fraction to a number to get the whole number.
CoCl = 1
H₂O = 3
So,
The Chemical formula is CoCl. 3H₂O
Final answer:
The chemical formula of the hydrate with 45.43% water and 54.57% CoCl is cobalt (II) chloride hexahydrate (CoCl₂·6H₂O).
Explanation:
The student is tasked with finding the chemical formula and name for a hydrate that is 45.43% water and 54.57% CoCl. Working with a sample size of 100 g is a common approach to simplify the calculations, as it allows us to directly convert percentage to mass.
First, calculate the mass of water in the sample by multiplying the total mass of the compound (100 g) by the percentage of water (0.4543), which equals 45.43 g. Then, calculate the mass of CoCl in the sample in the same way, leading to 54.57 g of CoCl.
Next, convert these masses to moles by using the molar mass of H₂O (approximately 18.015 g/mol) and the molar mass of CoCl₂ (approximately 129.839 g/mol). This results in about 2.522 moles of H₂O and about 0.420 moles of CoCl₂.
The mole ratio of water to CoCl₂ is then found by dividing the moles of each component by the smallest number of moles, yielding approximately 6 moles of H₂O for every mole of CoCl₂. This ratio suggests the chemical formula of the hydrate is CoCl₂·6H₂O, which means the hydrate is cobalt (II) chloride hexahydrate.
An organism had 1,000 grams of carbon-14 (a radioactive form of carbon) in it when it died. How much remains after five half-lives?
Answer:
After 5th half life the remaining mass is 31.25 g.
Explanation:
Given data:
Total mass of carbon-14 = 1000 g
Mass remain after 5 half lives = ?
Solution:
At time zero = 1000 g
At first half life = 1000 g/2 = 500 g
At second half life = 500 g/ 2= 250 g
At third half life = 250 g/ 2 = 125 g
At 4th half life = 125 g/2 = 62.5 g
At 5th half life = 62.5 g/2 = 31.25 g
Thus after 5th half life the remaining mass is 31.25 g.
What is the pressure of 0.540 mol of an ideal gas at 35,5 L and 223 K?
Use PV = nRT and R= 8.314 okPa
molok
0.715 kPa
2.45 kPa
28.2 kPa
62.7 kPa
Mark this and return
Answer:
P = 28.2 Kpa
Explanation:
Given data:
Volume = 35.5 L
Temperature = 223 K
Number of moles = 0.540 mol
R = 8.314 Kpa. L/mol.K
Pressure = ?
Solution:
PV = nRT
P = nRT / V
P = 0.540 mol . 8.314 Kpa. L/mol.K .223 K / 35.5 L
P = 1001.2 Kpa . L /35.5 L
P = 28.2 Kpa
Answer:c
Explanation:
Andreas accidently breaks a glass beaker. What should he do next? use his shoe to gather the pieces notify his teacher and classmates pick up the broken glassware
Answer:
I believe the correct answer is notify his teacher and classmates.
Explanation:
If he were to pick up or gather the broken glass, he could cut himself. By notifying a teacher, the situation could be dealt with in a safe manner.
Answer:
it is b
Explanation:
When two ions form an ionic bond, what type of compound is formed?
a. crystal
b. covalent bond
c. ionic compound
it is c. ionic compound just because it says ionic. can't be a crystal since there's no links to an ionic bond connected to crystals (and if it were it'd depend on the elements and the thingy majig itself right) and a covalent bond is an entirely different bond which isn't related to ionic. hope this helped, and i hope you have a good day too! :D
PLEASE HELP ME!! pleaseeeee
Answer:
[tex]P_2 O_5[/tex]has molar mass of 142 g.
Explanation:
Firstly we will find out the atomic weight of the elements of the compound.
Mg = 24 P = 31 Al = 27 Cl = 35 Ba = 137 O = 16
Now 1st compound is [tex]Mg Cl_2[/tex], in this compound there is 1 atom of Magnesium and 2 atom of Chlorine.
So atomic weight of [tex]Mg Cl_2[/tex]=[tex]24+2\times35=24+70=94[/tex]
2nd compound is [tex]P_2 O_5[/tex], in this compound there is 2 atom of Phosphorus and 5 atom of Oxygen.
So atomic weight of [tex]P_2 O_5[/tex] =[tex]2\times31+5\times16=62+80=142[/tex].
3rd compound is [tex]Ba Cl_2[/tex], in this compound there is 1 atom of Barium and 2 atom of Chlorine.
So atomic weight of [tex]Ba Cl_2[/tex]=[tex]137+2\times35=137+70=207[/tex]
4th compound is [tex]Al Cl_3[/tex], in this compound there is 1 atom of Aluminium and 3 atom of Chlorine.
So atomic weight of [tex]Al Cl_3[/tex]=[tex]27+3\times35=27+105=132[/tex]
Hence the substance having molar mass of 142 g is [tex]P_2 O_5[/tex].
An atom has an electron configuration of
1s², 2s², 2p⁶, 3s², 3p3
how many valence electrons does the atom have?
Answer:
5
Explanation:
The full electronic configuration of the element is
1s²2s²2p63s²3p³
The total number of electrons = addition of the index
That is number of electrons = 2+2+6+2+3 = 15
Therefore the atomic number of the element is 15.
Name of element with atomic number 15 is Phosphorus with symbol P
Number of electrons in the atom of the element is 15.
Using KLMN configuration = 2:8:5
Therefore number of valence electrons is 5
I hope this was helpful, please mark as brainliest
The atom has 5 valence electrons.
Explanation:The electron configuration provided indicates the arrangement of electrons in the atom's energy levels and sublevels. The last two energy levels are 3s and 3p. In this case, the 3s2 represents the filled s sublevel, and 3p3 represents the partially filled p sublevel. The valence electrons are those in the outermost energy level, so the atom in question has 5 valence electrons.
Learn more about valence electrons here:https://brainly.com/question/19129319
#SPJ3
What is the ground state electron configuration of a neutral atom of titanium
The ground state electron configuration of a neutral atom of titanium (atomic number 22) is represented as 1s² 2s² 2p⁶ 3s² 3p⁶ 4s² 3d², where electrons are filling up the energy levels and sublevels in sequence from lowest to highest according to the Aufbau Principle.
Explanation:The ground state electron configuration of a neutral atom of titanium, which is a transition metal with an atomic number of 22, can be determined using the principle that electrons fill the lowest energy levels first. This principle is expressed in the Aufbau Principle.
Commonly, we start with hydrogen, which has the electron configuration of 1s¹. We progress with the filling of each electron in succeeding energy levels and sublevels until we get to the number of electrons equal to the atomic number of titanium, which is 22.
In this case, the ground state electron configuration of titanium will be as follows: 1s² 2s² 2p⁶ 3s² 3p⁶ 4s² 3d².
This means that the innermost shell (n=1) has 2 electrons in the 's' sublevel, the next shell (n=2) has 2 electrons in the 's' sublevel and 6 in the 'p' sublevel, and so on.
Crucially, you can note that the last shell in the configuration is the third shell where we find 'd' electrons. The fourth shell fills with 's' electrons, and then the 'd' sublevel in the third shell begins to fill - this is a special feature of transition metals.
Learn more about Electron configuration here:https://brainly.com/question/29157546
#SPJ2
Identify each section of the periodic table.
metals
nonmetals
metalloids
Answer:
i added this table for some help
Explanation:
here are some examples
metals:They are hard and shiny, strong, and easy to shape. They are used for many industrial purposes. This group includes iron, gold, silver, chromium, nickel, and copper, some of which are also noble metals.
non-metals:a chemical element (as boron, carbon, or nitrogen) that lacks the characteristics of a metal and that is able to form anions, acidic oxides, acids, and stable compounds with hydrogen.
metalloids:Physical properties are usually those that can be observed using our senses such as color, luster, freezing point, boiling point, melting point, density, hardness and odor. Metalloids have mixed properties which are difficult to characterize.
The sections of the periodic table are
Metals - are present at the center of the periodic table.
Non-metals - They are present on the right side of the periodic table.
Metalloids - They are present on the left side of the periodic table.
What are metals?Metals are the elements which are present in the center of the periodic table. Metals are malleable, soft, and ductile, and they're used for causing many other matters.
Metals - They serve a variety of industrial functions. Iron, gold, silver, chromium, nickel, copper, and several other metals in this category are also noble metals.
Non-metals - Chemical elements that lack the properties of metals but may nevertheless produce anions, acidic oxides, acids, and stable compounds with hydrogen are referred to as non-metals. Examples include boron, carbon, and nitrogen.
Metalloids: Visually perceptible characteristics such as color, luster, melting temperature, freezing point, hardness, density, and odor are considered physical characteristics. Metalloids have complex features that make them challenging to categorize.
Thus, the position of metals, non-metal, and metalloids are given s the picture below.
To learn more about metals, refer to the link:
https://brainly.com/question/9443980
#SPJ2
I WILL GIVE BRAINLIEST
which abiotic factor would cause an ecosystem to support more biotic factors than the other abiotic factor provided?
A.very low depths
B.moderate elevation
C.very high temperatures
D.low annual precipitation
Answer:
B
Explanation:
At moderate elevation most of ecosystem supportive abiotic factors are present.
Choose the correct answers from the drop-down menus to complete the paragraph about how sunlight travels through the atmosphere.
Sunlight can be absorbed, , or scattered before it reaches Earth’s surface. About 30 percent of sunlight hits Earth directly, and 22 percent is filtered through . Dust particles short wavelengths, which causes the sky to appear blue. Earth radiates heat into the atmosphere, which traps the heat in gases, causing the .
Answer: reflected, clouds, greenhouse effect.
Explanation:
Sunlight can be absorbed, reflected , or scattered before it reaches Earth’s surface. About 30 percent of sunlight hits Earth directly, and 22 percent is filtered through clouds . Dust particles scatter short wavelengths, which causes the sky to appear blue. Earth radiates heat into the atmosphere, which traps the heat in gases, causing the greenhouse effect.
According to the context, the missing words to correctly complete the paragraph are the following:
Sunlight can be reflected or scattered before it reaches Earth's surface. About 30 percent of sunlight hits Earth directly, and 22 percent is filtered through clouds. Dust particles scatter short wavelengths, which causes the sky to appear blue. Earth radiates heat into the atmosphere, which traps the heat in gases, causing the greenhouse effect.
How sunlight travels through the atmosphere?The Sun is the main source of energy for all the processes that occur in the earth - atmosphere - ocean system.
Sunlight passing through the atmosphere undergoes a weakening process due to scattering (due to aerosols), reflection by clouds and absorption by gas molecules and suspended particles.
Consequently, gases in the atmosphere that absorb infrared radiation from the Earth or outgoing radiation are known as greenhouse gases.
Therefore, we can conclude that sunlight passing through the atmosphere undergoes a weakening process due to scattering, reflection by clouds and absorption.
Learn more about sunlight travels through the atmosphere here: brainly.com/question/24537668
what is a scientific theory? and what is a scientific law?
Answer:
Scientific theory- a proven and confirmed explanation of a certain feature of the natural world, based on facts that have been repeatedly confirmed via observation and experiment.
Scientific law- statements that are created from repetitive experimenting and observations and that describe or predict a series of natural events.
chemistry help please!
i am not sure how to do this, so if you could explain how you got the answer that’d be great.
write the chemical equation and balance the equation.
the word equation is:
hydrogen peroxide -> oxygen gas + water
Answer:
The word equation is:
[tex]\text { hydrogen peroxide } \rightarrow \text { oxygen gas + water }[/tex]
This reaction happens when there is the decomposition of hydrogen peroxide into oxygen and water. Thus, the equation would be
[tex]H_{2} O_{2} \rightarrow O_{2}+H_{2} O[/tex]
Balancing the equation requires to have the same number of atoms of each element on both the side. To balance this equation we need to add 2 water ([tex]H_2O[/tex]) molecules and 2 hydrogen peroxide ([tex]H_2O_2[/tex]) molecules . As we know, oxygen is naturally diatomic. Thus, the balancing equation would be:
[tex]2 H_{2} O_{2} \rightarrow O_{2}+2 H_{2} O[/tex]
what other means of qualitative analysis are used to identify metals(At least five)
Metals are identified using precipitation, visible-evidenced redox reactions, and complexation reactions.
Various tests, such as the spark test, flame test, chip test, fracture test, file test, hammer test, and plain observation, can be used to identify metals.
How do scientists identify unknown metals?Chemists use the same principle to identify unknown metals using a flame test. During a flame test, chemists expose an unknown metal to a flame. The flame will change color depending on which metal is present in the substance. The scientists will then be able to identify their unknown substance.Because you are discussing qualitative analysis in this case, several techniques such as precipitation, visible-evidenced redox reactions, and complexation reactions are appropriate for identifying metals. Such reactions are sufficient if, depending on the metal's cation, the precipitate, redox behavior, and complexation produce a specific color that allows the metal to be identified.To learn more about : Metals
Ref : https://brainly.com/question/7133422
#SPJ2
Qualitative analysis of metals involves various methods such as flame tests, colorimetry, and chelation titration to identify metals.
Explanation:Qualitative analysis: In addition to precipitatiokn, other means of qualitative analysis used to identify metals include flame tests, colorimetry, and chelation titration. Flame tests involve heating a sample of the metal and observing the characteristic color of the flame. Colorimetry uses the absorption or transmission of light by the metal ions to determine their concentration. Chelation titration involves the formation of a complex between the metal ion and a chelating agent, which can be detected using indicators or spectrophotometry.
When K+ and I- combine, a(n) _________ bond results. A) covalent B) ionic C) metallic D) polyatomic
Answer:
B
Explanation:
Nuclear reactions in a reactor produce a lot of thermal
energy. That energy then flows and warms up water, which
boils and produces steam. The steam then turns turbines
that generate electricity
Which statement below can be made about the production
of electricity in a nuclear reactor?
Heat flows in the form of electricity
Heat flows from the reactor to the water.
The water produces heat.
The steam produces heat
Mark this and return
Save and Exit
Next
Subu
Answer:
Heat flows from the reactor to the water
Explanation:
The thermal energy mentioned in the description is another way to say heat. The energy that is produced by the nuclear reactions leaves the reactor and enters the water, warming it.
The passage does not say that heat flows in the form of electricity, but rather that the turbines turned by the steam produce electricity.
The passage does not say that the steam produces the heat, but rather that the boiling of the water (caused by the heat) produces steam.
Answer:
B
Explanation:
Chemical properties include reactivity, flammability, and the ability to rust.
True
False
Answer:true
Explanation:
Molar concentration of sodium sulfate is .10M what is concentration of sodium ion
Answer:
0.2 M
Explanation:
Let's start by looking at a molecule of sodium sulfate.
Sodium sulfate is made up of sodium and sulfate ions. Sodium(Na) ion is given as Na(+1) where +1 is the valency of the Na atom or the charge on the Na ion. On the other hand sulfate( S[tex]O_{4}[/tex]) ion is represented as S[tex]O_{4}[/tex](-2) where -2 is charge on the sulfate ion. We know that a molecule is electrically neutral. Here the sodium and sulfate ions have charges of +1 and -2 respectively. Hence, for the sodium sulfate which is a compound containing soidum and sulfate ions, there should be 2 ions of sodium and an ion of sulfate, so that it is electrically neutral. Therefore the molecular formula of sodium sulfate is given as : [tex]Na_{2}[/tex][tex]SO_{4}[/tex].
Now we know that one molecule of sodium sulfate has 2 atoms of sodium ions in it. Also, one molar (1M) is 1 mole of the substamce in 1L of soltuion. And 0.1M means 0.1mole of substance (here it is sodium sulfate) in 1L of the solution. 1 molecule of sodium sulfate contains 2 atoms of sodium ions. Therefore, 1 mol of sodium sulfate contains 2 mols of sodium ions. Hence, 0.1mol of sodium sulfate contain 0.2 mols of sodium ions. Hence there are 0.2mols of sodium ions in the solution. Hence the concentration of sodium ion is 0.2M.