Answer:
(a). The time is 26.67 sec.
(b). The distance traveled during this period is 1066.9 m.
Explanation:
Given that,
Speed = 80 m/s
Acceleration = 3 m/s
Initial velocity = 0
(a). We need to calculate the time
Using equation of motion
[tex]v = u+at[/tex]
[tex]t = \dfrac{v-u}{a}[/tex]
Put the value into the formula
[tex]t = \dfrac{80-0}{3}[/tex]
[tex]t =26.67\ sec[/tex]
The time is 26.67 sec.
(b). We need to calculate the distance traveled during this period
Using equation of motion
[tex]s = ut+\dfrac{1}{2}at^2[/tex]
[tex]s = 0+\dfrac{1}{2}\times3\times(26.67)^2[/tex]
[tex]s =1066.9\ m[/tex]
The distance traveled during this period is 1066.9 m.
Hence, This is the required solution.
Jenny and Alyssa are members of the cross-country team. On a training run, Jenny starts off and runs at a constant 3.8 m/s. Alyssa starts 15 s later and runs at a constant 4.0 m/s. At what time after Jenny's start does Alyssa catch up with Jenny?
Answer:
285 seconds
Explanation:
Jenny speed is 3.8 m/s
Alyssa speed in 4.0 m/s
Alyssa starts after 15 seconds
Find the distance covered by Jenny, when Alyssa starts
Distance=Speed*time
Distance covered by Jenny in 15 seconds= 3.8×15=57m
Relative speed of the two members heading same direction will be;
4.0m/s-3.8m/s=0.2m/s
To find the time Alyssa catch up with Jenny you divide the distance to be covered by Alyssa by the relative speed of the two
Distance=57m, relative speed=0.2m/s t=57/0.2 =285 seconds
=4.75 minutes
Answer:
After 100 seconds Alyssa catch up with Jenny.Explanation:
Jenny's data:[tex]v_{Jenny} =3.8m/s[/tex]
[tex]t_{Jenny}=t[/tex]
[tex]d_{Jenny}=d[/tex]
Alyssa's data:[tex]v_{Alyssa}=4.0m/s[/tex]
[tex]t_{Alyssa}=t-15[/tex], because she has a difference of 15 seconds.
[tex]d_{Alyssa}=d[/tex]
Both move at a constant speed, that means there's no acceleration, their speed is always the same.
Now, the equation of each movement is
[tex]d=3.8t[/tex] and [tex]d=4(t-15)[/tex], then we solve this two.
We replace the first equation into the second one
[tex]3.8t=4(t-15)\\3.8t=4t-20\\20=4t-3.8t\\0.2t=20\\t=\frac{20}{0.2}\\ t=100[/tex]
That means after 100 seconds Alyssa catch up with Jenny.
What is the magnetic field at the center of a circular loop
ofwire of radius 4.0cm when a current of 2.0A flows in
thewire?
Answer:
The magnetic field at the center of a circular loop is [tex]3.14\times10^{-5}\ T[/tex].
Explanation:
Given that,
Radius = 4.0 cm
Current = 2.0 A
We need to calculate the magnetic field at the center of a circular loop
Using formula of magnetic field
[tex]B = \dfrac{I\mu_{0}}{2r}[/tex]
Where, I = current
r = radius
Put the value into the formula
[tex]B =\dfrac{2.0\times4\pi\times10^{-7}}{2\times4.0\times10^{-2}}[/tex]
[tex]B =0.00003141\ T[/tex]
[tex]B=3.14\times10^{-5}\ T[/tex]
Hence, The magnetic field at the center of a circular loop is [tex]3.14\times10^{-5}\ T[/tex].
A-3.07 μC charge is placed at the center of a conducting spherical shell, and a total charge of +7.25 μC is placed on the shell itself. Calculate the total charge on the outer surface of the conductor.
Answer:
4.18 μC
Explanation:
given,
charge place at the center of conducting spherical shell = -3.07 μC
total charge place in the shell itself = +7.25 μC
to calculate charge on the outer surface = ?
total charge on the outer surface = +7.25 μC - 3.07 μC
= 4.18 μC
hence, the charge on the outer surface of the shell is 4.18 μC
How many 1140 nm long molecules would you have to line up end to end to stretch a distance of 158 miles?
Answer:
221754385964.9123
Explanation:
Convert miles to nanometer
1 mile = 1.6 km
1 km = 1×10³×10³×10³×10³ nm
1 mile = 1.6×10¹² nm
So,
158 miles = 158×1.6×10¹² = 252.8×10¹² nm
Length of each molecule = 1140 nm
Number of molecules = Total length / Length of each molecule
[tex]\text{Number of molecules}=\frac{252.8\times 10^{12}}{1140}\\\Rightarrow \text{Number of molecules}=221754385964.9123[/tex]
There are 221754385964.9123 number of molecules in a stretch of 158 miles
A loop of wire with cross-sectional area 1×10^−3 m^2 lays centered in the xy -plane. The wire carries a uniform current of 180A running counter-clockwise. What is the magnitude of the magnetic moment of the current loop?
Answer:
[tex]\mu=180\times 10^{-3}A-m^2[/tex]
Explanation:
Given that,
Area of the loop, [tex]A=10^{-3}\ m^2[/tex]
Current flowing in the wire, I = 180 A
We need to find the magnetic moment of the current loop. It is given by :
[tex]\mu=I\times A[/tex]
[tex]\mu=180\times 10^{-3}[/tex]
[tex]\mu=180\times 10^{-3}A-m^2[/tex]
So, the magnetic moment of the current loop is [tex]180\times 10^{-3}A-m^2[/tex]. Hence, this is the required solution.
Three point charges, two positive and one negative, each having a magnitude of 26 micro-C are placed at the vertices of an equilateral triangle (48 cm on a side). What is the magnitude of the electrostatic force on the negative charge?
Answer:
84.44N
Explanation:
Hi!
The force F between two charges q₁ and q₂ at a distance r from each other is given by Coulomb's law:
[tex]F = k_c \frac{q_1 q_2}{r^2}[/tex]
The force on the negative charge q₁ is the sum of the forces from the other two charges. This forces have equal magnitude as both distances are 48cm. The magnitud is:
[tex]F_{1,2} =F_{1,3} = -k_c\frac{(26\mu C)^2}{(48cm)^2}=-9*10^9Nm^2C^{-2}*0.54*\frac{10^{-12}C^2}{10^{-4}m^2}=-48.75N\\[/tex]
(negative means attractive)
The sum of the forces, because of symmetry reasons actos along line L (see the figure), and its magnitud is:
[tex]F = 2*48.75*\cos(30\º)N = 84.44N[/tex]
A football quarterback runs 15.0 m straight down the playing field in 3.00 s. He is then hit and pushed 3.00 m straight backward in 1.74 s. He breaks the tackle and runs straight forward another 29.0 m in 5.20 s. (a) Calculate his average velocity (in m/s) for each of the three intervals. (Assume the quarterback's initial direction is positive. Indicate the direction with the sign of your answer.)
v1= m/s, v2= m/s, v3= m/s
(b) Calculate his average velocity (in m/s) for the entire motion. (Assume the quarterback's initial direction is positive. Indicate the direction with the sign of your answer.)
m/s
Answer:
a) [tex]v_{1}=14.29m/s\\v_{2}=9.25m/s\\v_{3}=6.36m/s[/tex]
b) [tex]v=+9.97m/s[/tex]
Explanation:
From the exercise we know that
[tex]x_{1} =15m, t_{1}=3s[/tex]
[tex]x_{2} =-3m, t_{1}=1.74s[/tex]
[tex]x_{3} =29m, t_{3}=5.20s[/tex]
From dynamics we know that the formula for average velocity is:
[tex]v=\frac{x_{2}-x_{1} }{t_{2}-x_{1} }[/tex]
a) For the three intervals:
[tex]v_{1}=\frac{x_{2}-x_{1} }{t_{2}-t_{1} }=\frac{(-3-15)m}{(1.74-3)s}=14.29m/s[/tex]
[tex]v_{2}=\frac{x_{3}-x_{2} }{t_{3}-t_{2} }=\frac{(29-(-3))m}{(5.20-1.74)s}=9.25m/s[/tex]
[tex]v_{3}=\frac{x_{3}-x_{1} }{t_{3}-t_{1} }=\frac{(29-15)m}{(5.20-3)s}=6.36m/s[/tex]
b) The average velocity for the entire motion can be calculate by the following formula:
[tex]v=\frac{v_{1}+v_{2}+v_{3} }{n} =\frac{(14.29+9.25+6.36)m/s}{3}=+9.97m/s[/tex]
A flat uniform circular disk (radius = 2.00 m, mass= 100
kg) is initially stationary. The disk is free to rotate inthe
horizontal plane about a frictionless axis perpendicular to
thecenter of the disk. A 40.0-kg person, standing 1.25 m from
theaxis, begins to run on the disk in a circular path and has
atangential speed of 2.00 m/s relative to the ground. Find
theresulting angular speed (in rad/s) of the disk.
Answer:
0.5 rad / s
Explanation:
Moment of inertia of the disk I₁ = 1/2 MR²
M is mass of the disc and R is radius
Putting the values in the formula
Moment of inertia of the disc I₁ = 1/2 x 100 x 2 x 2
= 200 kgm²
Moment of inertia of man about the axis of rotation of disc
mass x( distance from axis )²
I₂ = 40 x 1.25²
= 62.5 kgm²
Let ω₁ and ω₂ be the angular speed of disc and man about the axis
ω₂ = tangential speed / radius of circular path
= 2 /1.25 rad / s
= 1.6 rad /s
ω₁ = ?
Applying conservation of angular moment ( no external torque is acting on the disc )
I₁ω₁ = I₂ω₂
200 X ω₁ = 62.5 X 1.6
ω₁ = 0.5 rad / s
What magnitude charge creates a 1.70 N/C electric field at a point 4.60 m away? Express your answer with the appropriate units.
Answer:
[tex]Q=4.0*10^{-9}C[/tex]
Explanation:
Electric field of a charge:
[tex]E=k*\frac{Q}{R^{2}}[/tex]
[tex]Q=\frac{E*R^{2}}{K}=1.7*4.6^{2}/(9*10^{9})=4.0*10^{-9}C[/tex]
A rock is thrown straight up and passes by a window. The window is 1.7m tall, and the rock takes 0.19 seconds to pass from the bottom of the window to the top. How far above the top of the window will the rock rise?
Answer:
The rock will rise 3.3 m above the top of the window.
Explanation:
The equations used to find the height and velocity of the rock at any given time are as follows:
y = y0 + v0 · t + 1/2 · g · t²
v = v0 + g · t
Where:
y = height of the rock at time t
y0 = initial height
v0 = initial velocity
t = time
g = acceleration due to gravity
v = velocity of the rock at time t
If we place the frame of reference at the bottom of the window, we can say that at time t = 0.19 s the height of the rock is 1.7 m. That will allow us to find the initial velocity needed to find the time at which the rock is at its maximum height.
y = y0 + v0 · t + 1/2 · g · t²
1.7 m = 0 m + v0 · 0.19 s - 1/2 · 9.8 m/s² · (0.19 s)²
1.7 m + 1/2 · 9.8 m/s² · (0.19 s)² = v0 · 0.19 s
(1.7 m + 1/2 · 9.8 m/s² · (0.19 s)²) / 0.19 s = v0
v0 = 9.9 m/s
With the initial velocity, we can find at which time the rock reaches its max- height. We know that at maximum height, the velocity of the rock is 0. Then, using the equation of velocity:
v = v0 + g · t
0 = 9.9 m/s - 9.8 m/s² · t
-9.9 m/s / -9.8 m/s² = t
t = 1.0 s
Now calculating the position at time t = 1.0 s, we will find the maximum heigth:
y = y0 + v0 · t + 1/2 · g · t²
y = 0 m + 9.9 m/s · 1.0 s - 1/2 · 9.8 m/s² · (1.0 s)²
y = 5.0 m (this is the max-height meassured from the bottom of the window)
Then, the rock will rise (5.0 m - 1.7 m) 3.3 m above the top of the window.
A Hooke's law spring is mounted horizontally over a frictionless surface. The spring is then compressed a distance d and is used to launch a mass m along the frictionless surface. What compression of the spring would result in the mass attaining double the kinetic energy received in the above situation?
Answer:
The compression is [tex] \sqrt{2} \ d [/tex].
Explanation:
A Hooke's law spring compressed has a potential energy
[tex]E_{potential} = \frac{1}{2} k (\Delta x)^2[/tex]
where k is the spring constant and [tex]\Delta x[/tex] the distance to the equilibrium position.
A mass m moving at speed v has a kinetic energy
[tex]E_{kinetic} = \frac{1}{2} m v^2[/tex].
So, in the first part of the problem, the spring is compressed a distance d, and then launch the mass at velocity [tex]v_1[/tex]. Knowing that the energy is constant.
[tex]\frac{1}{2} m v_1^2 = \frac{1}{2} k d^2[/tex]
If we want to double the kinetic energy, then, the knew kinetic energy for a obtained by compressing the spring a distance D, implies:
[tex] 2 * (\frac{1}{2} m v_1^2) = \frac{1}{2} k D^2[/tex]
But, in the left side we can use the previous equation to obtain:
[tex] 2 * (\frac{1}{2} k d^2) = \frac{1}{2} k D^2[/tex]
[tex] D^2 = \frac{2 \ (\frac{1}{2} k d^2)}{\frac{1}{2} k} [/tex]
[tex] D^2 = 2 \ d^2 [/tex]
[tex] D = \sqrt{2 \ d^2} [/tex]
[tex] D = \sqrt{2} \ d [/tex]
And this is the compression we are looking for
Answer:
[tex]d'=\sqrt{2} d[/tex]
Explanation:
By hooke's law we have that the potential energy can be defined as:
[tex]U=\frac{kd^{2} }{2}[/tex]
Where k is the spring constant and d is the compression distance, the kinetic energy can be written as
[tex]K=\frac{mv^{2} }{2}[/tex]
By conservation of energy we have:
[tex]\frac{mv^{2} }{2}=\frac{kd^{2} }{2}[/tex] (1)
If we double the kinetic energy
[tex]2(\frac{mv^{2} }{2})=\frac{kd'^{2} }{2}[/tex] (2)
where d' is the new compression, now if we input (1) in (2) we have
[tex]2(\frac{kd^{2} }{2})=\frac{kd'^{2} }{2}[/tex]
[tex]2(\frac{d^{2} }{2})=\frac{d'^{2} }{2}[/tex]
[tex]d'=\sqrt{2} d[/tex]
Suppose two equal charges of 0.65 C each are separated by a distance of 2.5 km in air. What is the magnitude of the force acting between them, in newtons?
Answer:
Force between two equal charges will be 608.4 N
Explanation:
We have given charges [tex]q_1=0.65C\ and\ q_2=0.65C[/tex]
Distance between the charges = 2.5 km = 2500 m
According to coulombs law force between two charges is given by
[tex]F=\frac{1}{4\pi \varepsilon _0}\frac{q_1q_2}{r^2}=\frac{Kq_1q_2}{r^2}[/tex], here K is constant which value is [tex]9\times 10^9Nm^2/C^2[/tex]
So force [tex]F=\frac{9\times 10^9\times 0.65\times 0.65}{2500^2}=608.4N[/tex]
A hot-air balloon is drifting in level flight due east at 2.8 m/s due to a light wind. The pilot suddenly notices that the balloon must gain 28 m of altitude in order to clear the top of a hill 130 m to the east. How much time does the pilot have to make the altitude change without crashing into the hill? What minimum, constant, upward acceleration is needed in order to clear the hill? What is the horizontal component of the balloon’s velocity at the instant that it clears the top of the hill? What is the vertical component of the balloon’s velocity at the instant that it clears the top of the hill?
a. There is nothing suggesting that the balloon is accelerating horizontally, so we can assume that its horizontal speed is constant. The time before the balloon crash into the hill is simply the distance between the balloon and the hill divided by its velocity. Remember that velocity is simply the amount of distance that a object travels in a certain amount of time:
[tex]t = \frac{130m}{2.8 m/s} = 46.43 s[/tex]
b. Know that you know the maximum amount of time that the balloon can take to gain 28m of altitude, the minimum acceleration can be found using the equations constant acceleration motion:
[tex]x = \frac{1}{2}at^2 + v_ot +x_0[/tex]
where a is the acceleration, v_o is the initial vertical velocity, 0 as the balloon is not moving vertically before starting to ascend. xo is the initial position, which we will give a value of 0m.
[tex]x = \frac{1}{2}at^2\\ 28m = \frac{1}{2}(46.43s)^2a\\ a = \frac{2*28m}{(46.43s)^2} = 0.026 m/s^2[/tex]
c. As we said before, there isn't any kind of force that accelerates the balloon horizontally, therefore, we can consider that its horizontal velocity is constant and equal to 2.8m/s
d. Acceleration is the amount of change in velocity after a given amount of time. So, with the acceleration and the time we can fin the velocity:
[tex]v_y = a_y*t = 0.026m/s^2*46.43s=1.206 m/s[/tex]
The pilot has approximately 46.43 seconds to gain 28 m in altitude to clear the hill. The minimum constant upward acceleration needed is approximately 0.026 m/s². The horizontal component of the balloon's velocity at clearance will be 2.8 m/s, while the vertical component will be approximately 1.21 m/s.
Explanation:The time the pilot has to make the altitude change without crashing into the hill can be found using the horizontal velocity and the distance to the hill. Since the balloon drifts horizontally at 2.8 m/s and needs to cover 130 m, the time (t) it will take can be calculated as:
t = distance / horizontal velocity = 130 m / 2.8 m/s = 46.43 seconds.
To find the minimum constant upward acceleration (a) needed to clear the hill, we use the kinematic equation:
s = ut + (1/2)at2
Where s is the vertical displacement (28 m), u is the initial vertical velocity (0 m/s), and t is the time calculated above. Rearranging for a gives:
a = 2s / t2 ≈ 2(28 m) / (46.43 s)2 ≈ 0.026 m/s2.
As the horizontal velocity is not affected by the vertical motion in the absence of air resistance, the horizontal component of the balloon's velocity when it clears the top of the hill will remain 2.8 m/s.
To find the vertical component of the velocity at the instant it clears the top of the hill, we can use the equation:
vf = u + at
Where vf is the final vertical velocity, u is the initial vertical velocity, a is the acceleration, and t is the time taken. Substituting the known values gives:
vf = 0 m/s + (0.026 m/s2)(46.43 s) ≈ 1.21 m/s.
On your wedding day, you leave for the church 25 minutes before the ceremony is to begin. The church is 8 miles away. On the way, you have to make an unanticipated stop for construction work. As a result, your average speed for the first 15 minutes is only 7 miles per hour. What average speed in miles per hour do you need for the rest of the trip to get to the church in time
Answer:
V=37.5miles/h
Explanation:
For convenience, let's convert the average speed to miles per minute:
V=7miles/h * 1h/60min = 0.1167 miles/min.
The distance traveled during the first 15 min was:
D = V*t = 1.75 miles So, the remaining distance is 6.25miles.
Since you only have 10min left:
Vr = Dr / tr = 6.25 / 10 = 0.625 miles / min. If we take that to miles per hour we get final answer:
Vr = 0.625 miles/min * 60min/1h = 37.5 miles/h
Kent needs to know the volume of a sphere. When he measures the radius, he gets 135.4 m with an uncertainty of +4.6 cm. What's the uncertainty of the volume?
Answer:
The uncertainty in the volume of the sphere is [tex]1.059\times 10^{4} m^{3}[/tex]
Solution:
As per the question:
Measured radius of the sphere, R = 135.4 m
Uncertainty in the radius, [tex]\Delta R = 4.6 cm = 4.6\times 10^{- 2} = 0.046 m[/tex]
We know the volume of the sphere is:
[tex]V_{s} = \frac{4}{3}\pi R^{3}[/tex]
We know that the fractional error for the given sphere is given by:
[tex]\frac{\Delta V_{s}}{V_{s}} = \frac{4}{3}\pi.\frac{|Delta R}{R}[/tex]
where
[tex]\Delta V_{s}[/tex] = uncertainty in volume of sphere
Now,
[tex]\Delta V_{s} = \frac{4}{3}\pi 3R^{2}\Delta R[/tex]
Now, substituting the suitable values:
[tex]\Delta V_{s} = 4\pi (135.4)^{2}\times 0.046 = 1.059\times 10^{4} m^{3}[/tex]
Estimate the mass of blood in your body Explain your reasoning (Note: It is not enough to provide a numeric answer. The main point of this problem is to assess your reasoning ability)
Answer: A little more that 5 Kg for a healthy person
Explanation: First, we know the following:
The regular adult has from 9 to 12 pints of blood. This is around 5 liters for a healthy male adult.
The human body is composed mostly on water, around 80%.
Blood is mostly composed on plasma, which makes blood thicker than water.
Knowing that, almost all the body is compose of water, it is safe to think that blood density should be near to that of water but higher.
The density on water is a know value. Which makes the following true:
1 Liter of Water weights 1 Kg
It could be said then, that the total mass of blood for a healthy person should be a little more that 5 kgs.
The force of magnitude F acts along the edge of the triangular plate. Determine the moment of F about point O. Find the general result and then evaluate your answer if F = 260 N, b = 580 mm, and h = 370 mm. The moment is positive if counterclockwise, negative if clockwise.
Answer:
The moment is 81.102 k N-m in clockwise.
Explanation:
Given that,
Force = 260 N
Side = 580 mm
Distance h = 370 mm
According to figure,
Position of each point
[tex]O=(0,0)[/tex]
[tex]A=(0,-b)[/tex]
[tex]B=(h,0)[/tex]
We need to calculate the position vector of AB
[tex]\bar{AB}=(h-0)i+(0-(-b))j[/tex]
[tex]\bar{AB}=hi+bj[/tex]
We need to calculate the unit vector along AB
[tex]u_{AB}=\dfrac{\bar{AB}}{|\bar{AB}|}[/tex]
[tex]u_{AB}=\dfrac{h\hat{i}+b\hat{j}}{\sqrt{h^2+b^2}}[/tex]
We need to calculate the force acting along the edge
[tex]\hat{F}=F(u_{AB})[/tex]
[tex]\hat{F}=F(\dfrac{h\hat{i}+b\hat{j}}{\sqrt{h^2+b^2}})[/tex]
We need to calculate the net moment
[tex]\hat{M}=\hat{F}\times OA[/tex]
Put the value into the formula
[tex]\hat{M}=F(\dfrac{h\hat{i}+b\hat{j}}{\sqrt{h^2+b^2}})\times(-b\hat{j})[/tex]
[tex]\hat{M}=\dfrac{F}{\sqrt{h^2+b^2}}((h\hat{i}+b\hat{j})\times(-b\hat{j}))[/tex]
[tex]\hat{M}=\dfrac{F}{\sqrt{h^2+b^2}}(-bh\hat{k})[/tex]
[tex]\hat{M}=-\dfrac{bhF}{\sqrt{h^2+b^2}}[/tex]
Put the value into the formula
[tex]\hat{M}=-\dfrac{580\times10^{-3}\times370\times10^{-3}\times260}{\sqrt{(370\times10^{-3})^2+(580\times10^{-3})^2}}[/tex]
[tex]\hat{M}=-81.102\ \hat{k}\ N-m[/tex]
Negative sign shows the moment is in clockwise.
Hence, The moment is 81.102 k N-m in clockwise.
The moment will be 81.102 k N-m in a clockwise direction. The moment is used to rotate or twist the object.
What is a moment?The moment is defined as the product of the force and the perpendicular distance from the pivot point. Its unit is KN-m.
The given data in the problem is;
F is the Force = 260 N
b is the Side = 580 mm
h is the distance = 370 mm
Position of the points is found by;
O(0,0)
A(0,-b)
B(h,0)
The position vector for the AB will be;
[tex]\vec AB = (h-0)+ (0-(-b))j \\\\ \vec AB =h \vec i + b \vec j[/tex]
The unit vector along with AB
[tex]\rm u_AB = \frac{\vec AB }{|\vec AB|} \\\\ \rm u_AB = \frac{h \vec i + b \vec j}{\sqrt{h^2+b^2} }[/tex]
The net moment is found by;
[tex]\hat M = \hat F \times OA \\\\ \hat M =F \frac{h \vec i + b \vec j}{\sqrt{h^2+b^2} }\times (b \vec j) \\\\ \hat M =\frac{F}{\sqrt{h^2+b^2}} \times (bh \hat k) \\\\ \hat M =- \ \frac{bhf}{\sqrt{h^2+b^2}}[/tex]
[tex]\hat M =- \ \frac{bhf}{\sqrt{h^2+b^2}} \\\\ \hat M =- \ \frac{580 \times 10^-3 \times 370 \times 10^-3 \times 260 }{\sqrt{(370\times 10^-3)^2+(580\times 10^-3)^2}} \\\\ \hat M =- 81.102 \ KNm[/tex]
-ve sign shows that moment is clockwise.
Hence the moment will be 81.102 k N-m in a clockwise direction.
To learn more about the moment refer to the link;
https://brainly.com/question/6278006
An electron moves with a speed of 5.0 x 10^4m/s
perpendicularto a uniform magnetic field of .20T. What is the
magnitude ofthe magnetic force on the electron?
Final answer:
The magnitude of the magnetic force on an electron moving with a speed of 5.0 × [tex]10^4[/tex] m/s perpendicular to a magnetic field of 0.20 Tesla is calculated using the formula F = qvB, resulting in a force of 1.6 × [tex]10^{-15}[/tex] Newtons.
Explanation:
The magnetic force on an electron moving perpendicular to a magnetic field can be calculated using the formula F = qvB, where F is the magnetic force, q is the charge of the electron (-1.6 × [tex]10^{-19}[/tex] C), v is the velocity of the electron, and B is the magnetic field strength. Given that the electron moves with a speed of 5.0 × [tex]10^4[/tex] m/s perpendicular to a uniform magnetic field of 0.20 T, we use the formula to find the magnitude of the force:
F = (1.6 ×[tex]10^{-19}[/tex]C)( 5.0 × [tex]10^4[/tex] m/s)(0.20 T) =1.6 ×[tex]10^{-19}[/tex]C× 104 m/s × 2 × [tex]10^{-1}[/tex] T
F = 1.6 ×[tex]10^{-15}[/tex] N
The magnitude of the magnetic force on the electron is 1.6 ×[tex]10^{-15}[/tex] Newtons.
If the stopping potential of a metal when illuminated with a radiation of wavelength 480 nm is 1.2 V, find (a) the work function of the metal, (b) the cutoff wavelength of the metal, and (c) the maximum energy of the ejected electrons
Answer:
Part a)
[tex]W = 1.38 eV[/tex]
Part b)
[tex]\lambda = 901.22 nm[/tex]
Part c)
[tex]KE = 1.2 eV[/tex]
Explanation:
As we know by Einstein's equation of energy that
incident energy of photons = work function of metal + kinetic energy of electrons
here we know that incident energy of photons is given as
[tex]E = \frac{hc}{\lambda}[/tex]
[tex]E = \frac{(6.6 \times 10^{-34})(3 \times 10^8)}{480 \times 10^{-9}}[/tex]
now we have
[tex]E = 4.125 \times 10^{-19} J[/tex]
[tex]E = 2.58 eV[/tex]
kinetic energy of ejected electrons = qV
so we have
[tex]KE = e(1.2 V) = 1.2 eV[/tex]
Part a)
now we have
[tex]E = KE + W[/tex]
[tex]2.58 = 1.2 + W[/tex]
[tex]W = 1.38 eV[/tex]
Part b)
in order to find cut off wavelength we know that
[tex]W = \frac{hc}{\lambda}[/tex]
[tex]1.38 eV = \frac{1242 eV-nm}{\lambda}[/tex]
[tex]\lambda = 901.22 nm[/tex]
Part c)
Maximum energy of ejected electrons is the kinetic energy that we are getting
the kinetic energy of electrons will be obtained from stopping potential
so it is given as
[tex]KE = 1.2 eV[/tex]
The wheel has a weight of 5.50 lb, a radius of r=13.0 in, and is rolling in such a way that the center hub, O, is moving to the right at a constant speed of v=17.0 ft/s. Assume all the mass is evenly distributed at the outer radius r of the wheel/tire assembly. What is the total kinetic energy of the bicycle wheel?
Answer:
[tex]E_{k}=1589.5ftlb[/tex]
Explanation:
[tex]E_{k}=E_{movement}+E_{rotational}\\[/tex]
[tex]E_{k}=\frac{1}{2}mv^{2}+\frac{1}{2}Iw^{2}[/tex] (1)
For this wheel:
[tex]w=\frac{v}{r}[/tex]
[tex]I=mr^{2}[/tex]: inertia of a ring
We replace (2) and (3) in (1):
[tex]E_{k}=\frac{1}{2}mv^{2}+\frac{1}{2}(mr^{2})(\frac{v}{r})^{2}=mv^{2}=5.5*17^{2}=1589.5ftlb[/tex]
A particular automotive wheel has an angular moment of inertia of 12 kg*m^2, and is decelerated from 135 rpm to 0 rpm in 8 seconds. a. How much torque is required to do this? b. How much work is done to accomplish this?
Answer:
(A) Torque required is 21.205 N-m
(b) Wok done will be equal to 1199.1286 j
Explanation:
We have given moment of inertia [tex]I=12kgm^2[/tex]
Wheel deaccelerate from 135 rpm to 0 rpm
135 rpm = [tex]135\times \frac{2\pi }{60}=14.1371rad/sec[/tex]
Time t = 8 sec
So angular speed [tex]\omega _i=135rpm[/tex] and [tex]\omega _f=0rpm[/tex]
Angular acceleration is given by [tex]\alpha =\frac{\omega _f-\omega _i}{t}=\frac{0-14.1371}{8}=--1.7671rad/sec^2[/tex]
Torque is given by torque [tex]\tau =I\alpha[/tex]
[tex]=12\times 1.7671=21.205N-m[/tex]
Work done to accelerate the vehicle is
[tex]\Delta w=K_I-K_F[/tex]
[tex]\Delta W=\frac{1}{2}\times 12\times 14.137^2-\frac{1}{2}\times 12\times0^2=1199.1286J[/tex]
A ship leaves the island of Guam and sails a distance 255 km at an angle 49.0 o north of west. Part A: In which direction must it now head so that its resultant displacement will be 125 km directly east of Guam? (Express your answer as an angle measured south of east) Part B: How far must it sail so that its resultant displacement will be 125 km directly east of Guam?
Answer:
Explanation:
We shall represent displacement in vector form .Consider east as x axes and north as Y axes west as - ve x axes and south as - ve Y axes . 255 km can be represented by the following vector
D₁ = - 255 cos 49 i + 255 sin49 j
= - 167.29 i + 192.45 j
Let D₂ be the further displacement which lands him 125 km east . So the resultant displacement is
D = 125 i
So
D₁ + D₂ = D
- 167.29 i + 192.45 j + D₂ = 125 i
D₂ = 125 i + 167.29 i - 192.45 j
= 292.29 i - 192.45 j
Angle of D₂ with x axes θ
tan θ = -192.45 / 292.29
= - 0.658
θ = 33.33 south of east
Magnitude of D₂
D₂² = ( 192.45)² + ( 292.29)²
D₂ = 350 km approx
Tan
Two joggers are running with constant speed in opposite directions around a circular lake. One jogger runs at a speed of 2.15 m/s; The other runs at a speed of 2.55 m/s. The track around the lake is 300m long, and the two joggers pass each other at exactly 3:00 PM. How long is it before the next time the two joggers pass each other again?
Answer:
The two joggers will pass each other after 1 minute and 4 seconds at 3:01:04 PM.
Explanation:
The situation is analogous to two joggers running in opposite direction in a straight line where one jogger starts at the beginning of the line and the other starts at the other end, 300 m ahead.
The equation for the position of the joggers will be:
x = x0 + v · t
Where:
x = position of the jogger at time t
x0 = initial position
v = velocity
t = time
When the joggers pass each other, their position will be the same. Let´s find at which time both joggers pass each other:
x jogger 1 = x jogger 2
0 m + 2.15 m/s · t = 300 m - 2.55 m/s · t
(notice that the velocity of the joggers has to be of opposite sign because they are running in opposite directions).
2.15 m/s · t + 2.55 m/s · t = 300 m
4.70 m/s · t = 300 m
t = 300 m / 4.70 m/s = 63.8 s
The two joggers will pass each other after 1 minute and 4 seconds at 3:01:04 PM.
The speed limit on some interstate highways is roughly 80 km/h. What is this in meters per second? How many miles per hour is this?
Answer:
1) Speed in m/s equals 22.22 m/s.
2) Speed in miles per hour equals 49.712 mph.
Explanation:
Since we know that in 1 kilometer there are 1000 meters and in 1 hour there are 3600 seconds hence we can write
[tex]80km/h=\frac{80\times 1000m}{3600s}=22.22m/s[/tex]
Now we know that 1 mile equals 1.609 kilometer hence we conclude that 1 kilometer equals [tex]\frac{1}{1.609}=0.6214[/tex]mile
Hence
[tex]80km/h=\frac{80\times 0.6214miles}{1h}=49.712mph[/tex]
The speed limit of 80 km/h is approximately 22.2 meters per second and 49.7 miles per hour.
Explanation:The speed limit on some interstate highways is roughly 80 km/h. To convert this speed to meters per second, you divide by 3.6 (since 1 km/h is equal to about 0.27778 m/s). So, 80 km/h divided by 3.6 gives us approximately 22.2 m/s.
To convert the speed to miles per hour, you would use the conversion factor that 1 kilometer is approximately 0.621371 miles. Therefore, 80 km/h multiplied by 0.621371 gives us approximately 49.7 mi/h.
As part of calculations to solve an oblique plane triangle (ABC), the following data was available: b=50.071 horizontal distance, C=90.286° (decimal degrees), B=62.253° (decimal degrees). Calculate the distance of c to 3 decimal places (no alpha).
Answer:
The distance of c is 56.57
Explanation:
Given that,
Horizontal distance b = 50.071
Angle C = 90.286°
Angle B = 62.253°
We need to calculate the distance of c
Using sine rule
[tex]\dfrac{a}{\sin A}=\dfrac{b}{\sin B}=\dfrac{c}{\sin C}[/tex]
[tex]\dfrac{b}{\sin B}=\dfrac{c}{\sin C}[/tex]
Put the value into the formula
[tex]\dfrac{50.071}{\sin62.253 }=\dfrac{c}{\sin90.286}[/tex]
[tex]c= \dfrac{50.071\times\sin90.286}{\sin62.253}[/tex]
[tex]c=56.575[/tex]
Hence, The distance of c is 56.575.
A type of transmission line for electromagnetic waves consists of two parallel conducting plates (assumed infinite in width) separated by a distance a. Each plate carries the same uniform surface current density of 16.0 A/m, but the currents run in opposite directions. What is the magnitude of the magnetic field between the plates at a point 1.00 mm from one of the plates if a = 0.800 cm? (μ0 = 4π × 10-7 T · m/A)
Answer:
[tex]B=2.01 \times 10^{-5}\ T[/tex]
Explanation:
Distance between plates = 0.8 cm
Distance from one plate = 1 mm
Current density (J)= 16 A/m
Currents are flowing in opposite direction.
[tex]\mu _o=4\pi \times 10^{-7}[/tex]
When current is flowing in opposite direction then magnetic field given as
[tex]B=\dfrac{\mu _oJ}{2}+\dfrac{\mu _oJ}{2}[/tex]
[tex]B=\mu _oJ[/tex]
Now by putting the values we get
[tex]B=4\pi \times 10^{-7}\times 16[/tex]
[tex]B=2.01 \times 10^{-5}\ T[/tex]
The magnitude of the magnetic field between the plates at the given point is 2.011 x 10⁻⁵ T.
What is magnetic field?The magnitude of magnetic field between the plates due to the current flowing in opposite directions is determined by using the following formula;
B = μ₀J/2 + μ₀J/2
B = μ₀J
where;
μ₀ is permeability of free space = 4π x 10⁻⁷ T.m/AJ is current densitySubstitute the given parameters and solve for the magnetic field as follows;
B = (4π x 10⁻⁷) x (16)
B = 2.011 x 10⁻⁵ T
Thus, the magnitude of the magnetic field between the plates at the given point is 2.011 x 10⁻⁵ T.
Learn more about magnetic field here: https://brainly.com/question/7802337
If the electric potential is zero at a particular point, must the electric field be zero at the point? Explain
Answer:
If the potential is zero , the electric field could be different to zero
Explanation:
The relation between the electric field and the potential is:
=−∇
∇: gradient operator
If the electric potential, , is zero at one point but changes in the neighbourhood of this point, then the Electric field, , at that point is different from zero.
A point charge of 3 µC is located at x = -3.0 cm, and a second point charge of -10 µC is located at x = +4.0 cm. Where should a third charge of +6.0 µC be placed so that the electric field at x = 0 is zero?
Answer:
The charge q₃ must be placed at X = +2.5 cm
Explanation:
Conceptual analysis
The electric field at a point P due to a point charge is calculated as follows:
E = k*q/d²
E: Electric field in N/C
q: charge in Newtons (N)
k: electric constant in N*m²/C²
d: distance from charge q to point P in meters (m)
The electric field at a point P due to several point charges is the vector sum of the electric field due to individual charges.
Equivalences
1µC= 10⁻6 C
1cm= 10⁻² m
Data
k = 8.99*10⁹ N×m²/C²
q₁ =+3 µC =3*10⁻⁶ C
q₂ = -10 µC =-10*10⁻⁶ C
q₃= +6µC =+6*10⁻⁶ C
d₁ = 3cm =3×10⁻² m
d₂ = 4cm = 4×10⁻² m
Graphic attached
The attached graph shows the field due to the charges:
E₁:Field at point P due to charge q₁. As the charge is positive ,the field leaves the charge. The direction of E1 is (+ x).
E₂: Field at point P due to charge q₂. As the charge is positive ,the field leaves the charge. The direction of E1 is (+ x).
Problem development
E₃: Field at point P due to charge q₃. As the charge q₃ is positive, the field leaves the charge.
The direction of E₃ must be (- x) so that the electric field can be equal to zero at point P since E₁ and E₂ are positive, then, q₃must be located to the right of point P.
We make the algebraic sum of fields at point P due to the charges q1, q2, and q3:
E₁+E₂-E₃=0
[tex]\frac{k*q_{1} }{d_{1}^{2} } +\frac{k*q_{2} }{d_{2}^{2} } -\frac{k*q_{3} }{d_{3}^{2} } =0[/tex]
We eliminate k
[tex]\frac{q_{1} }{d_{1} ^{2} } +\frac{q_{2} }{d_{2} ^{2} }+\frac{q_{3} }{d_{3} ^{2} }=0[/tex]
We replace data
[tex]\frac{3*10^{-6} }{(3*10^{-2})^{2} } +\frac{10*10^{-6} }{(4*10^{-2})^{2} } +\frac{6*10^{-6} }{d_{3} ^{2} } =0[/tex]
we eliminate 10⁻⁶
[tex]\frac{3}{9*10^{-4} } +\frac{10}{16*10^{-4} } =\frac{6}{d_{3}^{2} }[/tex]
[tex](\frac{1}{10^{-4} }) *(\frac{1}{3} +\frac{5}{8}) =\frac{6}{d_{3}^{2} }[/tex]
[tex]\frac{23*10^{4} }{24} =\frac{6}{d_{3} ^{2} }[/tex]
[tex]d_{3} =\sqrt{\frac{6*24}{23*10^{4} } }[/tex]
[tex]d_{3} =2.5*10^{-2} m\\d_{3} =2.5 cm[/tex]
The charge q₃ must be placed at X = +2.5 cm
A driver increases his velocity from 20 km/hr to 100 km/hr. BY what factor does he increase the kinetic energy of the car with this increase in speed? Kinetic energy is 4 times greater
Kinetic energy is 16 times greater
Kinetic energy is 25 times greater
Kinetic energy is 9 times greater
Kinetic energy is 2 times greater
Answer:
25 times greater
Explanation:
Let the mass of the car is m
Initial speed, u = 20 km/h = 5.56 m/s
Final speed, v = 100 km/h = 27.78 m/s
The formula for the kinetic energy is given by
[tex]K = \frac{1}{2}mv^{2}[/tex]
So, initial kinetic energy
[tex]K_{i} = \frac{1}{2}m(5.56)^{2}[/tex]
Ki = 15.466 m
final kinetic energy
[tex]K_{f} = \frac{1}{2}m(27.78)^{2}[/tex]
Kf = 385.86 m
Increase in kinetic energy is given by
= [tex]\left ( \frac{K_{f}}{K_{i}} \right )[/tex]
= 385.86 / 15.466 = 25
So, the kinetic energy is 25 times greater.
The kinetic energy of the car increases by a factor of 25.
Explanation:The increase in kinetic energy of the car can be determined by comparing the initial kinetic energy to the final kinetic energy. Kinetic energy is directly proportional to the square of velocity.
In this case, the velocity is increased from 20 km/hr to 100 km/hr. Let's calculate the ratio of the final kinetic energy to the initial kinetic energy.
The initial kinetic energy is given by 1/2 * (mass of the car) * (initial velocity)^2, and the final kinetic energy is given by 1/2 * (mass of the car) * (final velocity)^2.
Let's substitute the values and calculate the ratio:
Ratio = (1/2 * (mass) * (final velocity)^2) / (1/2 * (mass) * (initial velocity)^2) = (final velocity)^2 / (initial velocity)^2.
Substituting the numbers, Ratio = (100 km/hr)^2 / (20 km/hr)^2 = 10000 / 400 = 25.
Therefore, the factor by which the kinetic energy of the car increases is 25 times greater.
While skydiving, your parachute opens and you slow from 50.0 m/s to 8.0 m/s in 0.75 s . Determine the distance you fall while the parachute is opening.
Answer:
21.75 m
Explanation:
t = Time taken for the car to slow down = 0.75 s
u = Initial velocity = 50 m/s
v = Final velocity = 8 m/s
s = Displacement
a = Acceleration
Equation of motion
[tex]v=u+at\\\Rightarrow a=\frac{v-u}{t}\\\Rightarrow a=\frac{8-50}{0.75}\\\Rightarrow a=-56\ m/s^2[/tex]
Acceleration is -56 m/s²
[tex]v^2-u^2=2as\\\Rightarrow s=\frac{v^2-u^2}{2a}\\\Rightarrow s=\frac{8^2-50^2}{2\times -56}\\\Rightarrow s=21.75\ m[/tex]
The distance covered in the 0.75 seconds is 21.75 m