An automobile starter rated at 2.25 hp draws how many amps from a 10.0 V battery?

Answers

Answer 1
First we need to convert the power from horsepower (hp) into watts. Since [tex]1 hp=736 W[/tex], we have
[tex]P=2.25 hp \cdot 736 W/hp=1655 W[/tex]

Then we know that the electrical power of a device is the product between the voltage and the current:
[tex]P=VI[/tex]
So if we re-arrange this equation, we get the current flowing in the circuit:
[tex]I= \frac{P}{V}= \frac{1655 W}{10.0 V}=165.5 A [/tex]
Answer 2
Final answer:

An automobile starter rated at 2.25 hp (which converts to 1683.5 Watts) would draw approximately 168.35 Amps from a 10.0 Volt battery.

Explanation:

The question is asking how many amps an automobile starter rated at 2.25 horsepower would draw from a 10.0 Volt battery. We can start by converting the horsepower to watts - as 1 horsepower is approximately 746 watts (2.25 hp = 1683.5 W).

Using the power formula in physics, P = IV where P is the power (in watts), I is the current (in amperes) and V is the voltage (in volts), we can calculate the current, I = P/V. That gives I = 1683.5 W / 10.0 V = 168.35 Amps. Hence, The starter would draw approximately 168.35 Amps from the battery.

Learn more about Electric Current here:

https://brainly.com/question/2264542

#SPJ12


Related Questions

what is the difference between series and parallel circuits and examples of when you would use them ?

Answers

Difference between series and parallel circuits:

In circuits, two or more elements are in series if they exclusively share a single node and consequently carry the same current. On the other hand, two or more elements are in parallel if they are connected to the same two nodes and consequently have the same voltage across them.

We know that a node is the point of connection between two or more branches and a branch represents a single element such as a voltage source or a resistor or other elements.

In the figures below there are the representations of this type of circuits.

Example of when I would use them:

*Lighting systems, such as in a house or on a Christmas tree, often consistof N lamps connected either in parallel or in series,

*These type of circuits find continual applications in electronics, communications, and control systems.

*Lawnmowers have two switches in series with each other. Therefore, both switches need to be pressed before the mower will turn on.

What is the correct current value if the selector is in the 0.5 dcma position?

Answers

Final answer:

The correct current value is 1.35 A.

Explanation:

The correct current value in the 0.5 dcma position can be determined using the given information. According to the information provided in the question, after 5.00 ms, the current declines to 0.368 of the initial value at t=0. Therefore, we can find the initial value of the current by dividing the value at t=5.00 ms by 0.368. Let's calculate:

Initial current = (0.368)(3.68 A) = 1.35 A

So, the correct current value if the selector is in the 0.5 dcma position is 1.35 A.

According to charles' law, the volume of a fixed amount of gas is directly proportional to

Answers

Final answer:

According to Charles's law, the volume of a fixed amount of gas is directly proportional to its Kelvin temperature, assuming constant pressure. It means that volume of the gas increases with increase in temperature and decreases with decrease in temperature.

Explanation:

According to Charles's law, the volume of a fixed amount of gas is directly proportional to its Kelvin temperature when the pressure is held constant. This law was named after the French scientist Jacques Alexandre César Charles, a pioneer in balloon flight. It essentially means that when the temperature of gas increases under constant pressure, the volume of the gas also increases and vice versa.

For instance, if you raise the gas temperature from 283 K to 303 K at a constant pressure, you will see an increase in its volume from 0.300 L to 0.321 L, corroborating Charles's law.

Learn more about Charles's Law here:

https://brainly.com/question/16927784

#SPJ3

Magnetic fields are produced by: atoms currents voltages charges

Answers

The answer is currents

Answer:

curtent

Explanation:

A 72 kg sled Is pulled forward from rest by a snowmobile and accelerates at 2 m/s squared forward for five seconds. The force of friction acting on the sled is 120 N backwards. The total mass of the snowmobile and driver is 450 kg. The drag force acting on the snowmobile is 540 N backwards. What is the tension in the rope.

Answers

Final answer:

The tension in the rope is 516 N.

Explanation:

To find the tension in the rope, we need to calculate the net force acting on the sled. The net force is equal to the mass of the sled multiplied by its acceleration. Given that the sled has a mass of 72 kg and accelerates at 2 m/s² for 5 seconds, we can use the equation:

Net force = mass x acceleration

Net force = 72 kg x 2 m/s² = 144 N

However, there are two forces acting in the opposite direction - the force of friction (120 N backwards) and the drag force (540 N backwards). So, the net force is:

Net force = 144 N - 120 N - 540 N = -516 N

The negative sign indicates that the net force is acting in the opposite direction of motion. Therefore, the tension in the rope is equal in magnitude and opposite in direction to the net force, so the tension in the rope is 516 N.

A cran uses an average force of 5200N to lift a steel beam 25m. How much work does the crane do on the steal beam.
Please help or explain how to do this anyone. Please and thank youu

Answers

The work done by a force is  given by:
[tex]W=Fd \cos \theta[/tex]
where
F is the magnitude of the force
d is the distance covered by the object
[tex]\theta[/tex] is the angle between the direction of the force and the direction of motion

In our problem, [tex]F=5200 N[/tex], [tex]d=25 m[/tex] and [tex]\theta=0[/tex] (because the force is parallel to the direction of motion), so the work done by the crane is
[tex]W=(5200 N)(25 m)(\cos 0^{\circ})=1.3 \cdot 10^5 J[/tex]

Which describes constant acceleration in one direction? a baseball moving in a curved path over a fence a basketball at rest a skydiver in free fall a car increasing its speed while moving around a curve

Answers

A skydiver in free fall because all the other choices there speed would slow down. So if a skydiver is in the air falling the skydiver would keep getting constant speed until he or she would hit the ground.  

Hoped this helped :)..
-
-
-
-
Have a great day!!

Final answer:

A skydiver in free fall describes constant acceleration in one direction since gravity provides a constant acceleration downwards near Earth's surface.

Explanation:

The question asks which scenario describes constant acceleration in one direction. The correct answer is a skydiver in free fall. This is because, near the surface of the Earth, an object in free fall experiences a constant acceleration due to gravity, with a magnitude of approximately 9.8 m/s².

The direction of this acceleration is vertically downwards, and it remains constant in both magnitude and direction in the absence of air resistance.

In contrast, a car rounding a bend, a merry-go-round increasing speed, or a pendulum swinging all experience changing directions or types of motion which do not represent constant acceleration in one direction.

A car turns a corner that has a radius of 5 m and experiences a centripetal acceleration of 20 m/s². If the radius of turn were increased to 10 m, calculate the centripetal acceleration.

Answers

The centripetal acceleration is given by:
[tex]a_c = \frac{v^2}{r} [/tex]
where
v is the velocity of the object
r is the radius of the trajectory

Initially, the car has an acceleration of [tex]a_c = 20 m/s^2[/tex] and the radius of its trajectory is [tex]r=5 m[/tex], so its velocity is
[tex]v= \sqrt{a_c r}= \sqrt{(20 m/s^2)(5 m)} =10 m/s [/tex]

Then the radius is increased to r=10 m, so the new centripetal acceleration is:
[tex]a_c = \frac{v^2}{r}= \frac{(10 m/s)^2}{10 m}= 10 m/s^2 [/tex]

Answer:

10

Explanation:

A sound from a source has an intensity of 270 dB when it is 1 m from the source.


What is the intensity of the sound when it is 3 m from the source?

30 dB
90 dB
810 dB
2430 dB

Answers

Remember that sound intensity decreases in inverse proportion to the distance squared. So, to solve this we are going to use the inverse square formula: [tex] \frac{I_{2} }{I_{1}}= (\frac{d{2} }{d_{1}})^2 [/tex]
where
[tex]I_{2}[/tex] is the intensity at distance 2
[tex]I_{1}[/tex] is the intensity at distance 1
[tex]d_{2}[/tex] is distance 2
[tex]d_{1}[/tex] is distance 1

We can infer for our problem that [tex]I_{1}=270[/tex], [tex]d_{1}=1[/tex], and [tex]d_{2}=3[/tex]. Lets replace those values in our formula to find [tex]I_{2}[/tex]:
[tex] \frac{I_{2} }{I_{1}}= (\frac{d{2} }{d_{1}})^2 [/tex]
[tex] \frac{I_{2} }{270} =( \frac{1}{3} )^2[/tex]
[tex]\frac{I_{2} }{270} = \frac{1}{9} [/tex]
[tex]I_{2}= \frac{270}{9} [/tex]
[tex]I_{2}=30[/tex] dB

We can conclude that the intensity of the sound when is 3 m from the source is 30 dB.

two charges separated a distance of 1.0 meter exert a 1.0-N force on each other If the charges are pushed to a separation of 1/4 meter the force of each charge would be?

Answers

Newtons of force is 20

Final answer:

The electrostatic force between two charges increases by a factor of 16 when the distance between them is reduced to a quarter of the original distance, resulting in a new force of 16 N.

Explanation:

The question provided deals with the concept of electric force between point charges, which is described by Coulomb's Law. According to this law, the force F between two point charges is directly proportional to the product of the charges q₁ and q₂, and inversely proportional to the square of the distance r between them. Specifically, F = k * (q₁ * q₂) / r², where k is Coulomb's constant.

In the original scenario, two charges exert a 1.0-N force when separated by a distance of 1.0 meters. When the separation is reduced to 1/4 meter (or 0.25 meters), the distance squared term in Coulomb's Law (r²) becomes (0.25)², which is 1/16 of the original distance squared. Since the force is inversely proportional to the square of the distance, decreasing the distance by a factor of 4 (which squares to be a factor of 16) increases the force by that same factor of 16.

Thus, the new force would be 1.0 N multiplied by 16, resulting in a force of 16 N when the charges are 1/4 meter apart.

A ray of light passes from air into carbon disulfide (n = 1.63) at an angle of 28.0 degrees to the normal. what is the refracted angle?

Answers

We can solve the problem by using Snell's law, which states 
[tex]n_i \sin \theta_i = n_r \sin \theta_r[/tex]
where
[tex]n_i[/tex] is the refractive index of the first medium
[tex]\theta_i[/tex] is the angle of incidence
[tex]n_r[/tex] is the refractive index of the second medium
[tex]\theta_r[/tex] is the angle of refraction

In our problem, [tex]n_i=1.00[/tex] (refractive index of air), [tex]\theta_i = 28.0^{\circ}[/tex] and [tex]n_r=1.63[/tex] (refractive index of carbon disulfide), therefore we can re-arrange the previous equation to calculate the angle of refraction:
[tex]\sin \theta_r = \frac{n_i}{n_r} \sin \theta_r = \frac{1.00}{1.63} \sin 28.0^{\circ} = 0.288[/tex]
From which we find
[tex]\theta_r = \arcsin (0.288)=16.7^{\circ}[/tex]

The change in electric potential energy per unit charge is

Answers

A) amperes

B) current.  

C) gravity.  

D) voltage.

correct. D) Voltage is the change in electric potential energy per unit charge. It is sometimes called the electric potential difference

Voltage is called as the change in electric potential energy per unit charge which is called as the electric potential difference. So, the correct option is D.

What is Voltage?

Voltage is also called electric pressure, electric tension or potential difference which is defined as the difference in electric potential between two points. This corresponds to the work required per unit charge to move a test charge between two points in a static electric field.

Voltage is called as the change in electric potential energy per unit charge which is called as the electric potential difference. The SI unit for voltage is Volt which is represented by the letter v which derived SI unit of the electromotive force or electric potential.

Therefore, the correct option is D.

Learn more about Voltage, here:

https://brainly.com/question/13521443

#SPJ3

Your question is incomplete, most probably the complete question is:

The change in electric potential energy per unit charge is

A) amperes

B) current.  

C) gravity.  

D) voltage

A person on earth would weigh a lot more on the sun due to increased ________________. gravity mass atoms energy

Answers

A person on Earth would weigh a lot more on the sun due to increased gravity.

The sun is a massive object as compared to the sun. It is assumed that the gravity must be a lot greater as well. It is the strong gravitational pull of the sun that keeps our planets from drifting off into space. No matter where you are the mass of an object will remain constant, so will the energy and the number of atoms they hold. 

The answer is gravity.

Answer:

Gravity

Explanation:

The weight of a person is given by :

W = m g

Where

m is the mass of the person

g is acceleration due to gravity.

Weight of the person depend on the value of acceleration due to gravity. The mass of the person remains the same in every location. On the surface of earth it is equal to 9.8 m/s². While on surface of sun it is equal to 274 m/s².

Hence, a person on earth would weigh a lot more on the sun due to increased gravity.

Alpha century is 4 light years from earth how long would it take for light form alpha centauri to reach earth

Answers

4 Earth years. I hope this helps

Given:

Distance of alpha century = 4 light year

Speed of light = 3 × [tex] 10^{8} [/tex] m

To find:

Time taken by light to reach earth = ?

Formula used:

Distance = speed × time

Solution:

Distance = 4 light year

Converting distance from light year into meter

1 light year = 365 × 24 × 60 × 60

4 light year = 4 × 365 × 24 × 60 × 60× 3 ×[tex] 10^{8} [/tex]

As we know,

Distance = speed × time

s = v × t

Where s = distance

v = velocity

t = time

So,t = [tex] \frac{s}{v} [/tex]

t = [tex] \frac{4 × 365 × 24 × 60 × 60× 3 ×[tex] 10^{8} [/tex]}{3 ×[tex] 10^{8}} [/tex]

t = 4 × 365 × 24 × 60 × 60 second

t = 4 year

Thus, Time taken by light to reach earth from alpha century is 4 earth year.

At an ocean depth of 10.0 m, a diver’s lung capacity is 2.40 l. the air temperature is 32.0°c and the pressure is 101.30 kpa. what is the volume of the diver’s lungs at the same depth, at a temperature of 21.0°c and a pressure of 141.20 kpa?

Answers

At an ocean depth of 10.0 m, a diver’s lung capacity is 2.40 l. the air temperature is 32.0°c and the pressure is 101.30 kpa. The volume of the diver’s lungs at the same depth, at a temperature of 21.0°c and a pressure of 141.20 kpa is 1.66 L.

Answer:

V = 1.66 L

Explanation:

As we know that at the depth of 10 m the volume of the lungs of diver is given as

V = 2.40 L

Temperature = 32 degree C

Pressure = 101.30 kPa

Now we have change the values of pressure and temperature

Pressure = 141.20 kPa

Temperature = 21 degree C

Now we can use idea gas equation to solve this

[tex]PV = nRT[/tex]

[tex]\frac{P_1V_1}{RT_1} = \frac{P_2V_2}{RT_2}[/tex]

so we have

[tex]\frac{101.30 \times 2.40}{R(273 + 32)} = \frac{141.20 \times V}{R(273 + 21)}[/tex]

[tex]V = 1.66 L[/tex]

Two tugboats pull a disabled supertanker. Each tug exerts a constant force of 2.20×106 N , one at an angle 12.0 ∘ west of north, and the other at an angle 12.0 ∘ east of north, as they pull the tanker a distance 0.700 km toward the north.

Answers

the answer would be 45

A radioactive sample has a count rate of 800 counts per minute. One hour later, the count rate has fallen to 100 counts per minute. What is the half-life of the sample?

Answers

Radioactivity equation states:

N = No e^(-0.693t/t1/2) --- Where t = time, t1/2 = half-life, N = count after time t, No = Initial count

Using the values given;

100 = 800 e^(-0.693*1/t1/2)
100/800 = e^(-0.693t/t1/2)
0.125 = e^(-0.693/t1/2)
Taking natural logs on both sides;
log 0.125 = -0.693/t1/2 * log (e)
-0.9031 = -0.693/t1/2 * 0.4323
t1/2 = (-0.693*0.4323)/(-0.9031) = 0.3317 hours

Therefore, half-life of the sample is approximately 0.3317 hours

At its nucleus, the milky way galaxy is about 100,000 light-years wide and _____.

Answers

10,000 light-years thick

At it's nucleus,the milky-way galaxy is about 100,000 light-years wide and 10,000 light-years thick

hope this helps

If element "X" is heavier than element "Y" then...

Question 4 options:

A.) Element "X" must be a metal.

B.) Then Element "X" must be on the right side of the periodic table.

C.) Element "X" must have more particles in the nucleus than Element "Y."

D.) Element "X" must have a higher melting point than Element "Y."

Answers

The best answer would be C. 

The mass of an element depends on the number of particles found in the nucleus of the atom. Atomic mass can be computed by adding the number of protons and the number of neutrons. Protons and neutrons are found in the nucleus of an atom. So the answer must be letter C. 

Which substances resist pH changes?
Acids
Hydrogen ions
Buffers
Bases

Answers

Buffers will be the correct answer because I took the test and I got it right by answering Buffers for this question.  

The correct choice is Buffers.

Buffers contains both acids and bases in equilibrium.when base is added to buffers, they adjust the pH value by releasing hydrogen ions.when acid is added to buffers, they adjust the pH value by consuming hydrogen ions. hence these substances resist any change in their pH value by releasing or absorbing hydrogen ions.This process keeps the pH value constant.

Where must an object be placed to form an image 30.0 cm from a diverging lens with a focal length of 43.0 cm?

Answers

Using lens equation;

1/o + 1/i = 1/f; where o = Object distance, i = image distance (normally negative), f = focal length (normally negative)

Substituting;

1/o + 1/-30 = 1/-43 => 1/o = -1/43 + 1/30 = 0.01 => o = 1/0.01 = 99.23 cm

Therefore, the object should be place 99.23 cm from the lens.

For the electric field shown, which of the following statements describes an increase in voltage?

A) A negative charge crosses an equipotential line toward the source charge.
B) You cannot tell from the information given.
C) A positive charge crosses an equipotential line toward the source charge.
D) A positive charge moves along an equipotential line.

UPDATE: ANSWER IS C

Answers

The correct answer is: Option (C) A positive charge crosses an equipotential line toward the source charge.

Explanation:
The red circles drawn are the equipotential circles. It means that on the line of the circle the work that YOU have done from bringing the positive test charge from infinity to every point on the line of the circle is same. Imagine you are moving towards the source charge from very far away. The more you move towards the source charge the more you will experience the force on you due to the increasing electric field near the charge and the more POSITIVE work you do. It means the work increases and in Electromagnetism that work is translated as the voltage. Hence a positive charge crosses an equipotential line toward the source charge with the increase in voltage. Therefore the correct option is (C).

Answer:

C

Explanation:

Just took test

A bus moves with 500000joules the driver applies brakes how much work is needed for the bus to stop

Answers

The bus is moving and its initial kinetic energy is
[tex]K_i=500000J=5 \cdot 10^5 J[/tex]

We want the bus to stop, so that its final kinetic energy is zero:
[tex]K_f = 0[/tex]

The work-energy theorem states that the work done by an object is equal to its variation of kinetic energy:
[tex]W=K_f - K_i[/tex]
Therefore:
[tex]W=0-5 \cdot 10^5 J = -5 \cdot 10^5 J[/tex]
This is the amount of work that needs to be done in order to stop the bus, and its sign is negative because the force applied (the force of the brakes) is opposite to the direction of motion of the bus.

A ground-fault circuit interrupter is a (an) _____. A)wire that provides an easier path for a current to take if a short circuit develops B) electrical safety outlet that monitors current flowing to and from an appliance C) switch that opens when current in a circuit is too high

Answers

the correct answer to the equation is B

-Todd

B) electrical safety outlet that monitors current flowing to and from an appliance.

What is Ground fault circuit interrupter?

A GFCI should be used in any indoor or outdoor area where water may come into contact with electrical products.

The GFCIs be used in all kitchens, bathrooms, garages, and outdoors.

Here,

A ground-fault circuit interrupter is an electrical safety outlet that monitors current flowing to and from an appliance.

The ground-fault circuit interrupter, or GFCI,

It is a fast acting circuit breaker designed to shut off electric power in the event of a ground-fault within as little as 1/40 of a second.

It works by comparing the amount of current going to and returning from equipment along the circuit conductors.

Therefore,

A ground-fault circuit interrupter is an electrical safety outlet that monitors current flowing to and from an appliance.

Learn more about Ground fault circuit interrupter here:

https://brainly.com/question/1873575

#SPJ2

Which of the following would decrease the magnetic field around a wire?
A. decreasing the current
B. reversing the poles of the wire
C. looping a section of the wire into a solenoid
D. increasing the current

Answers

The correct answer is
A. decreasing the current

In fact, the magnetic field produced by a current carrying wire is given by
[tex]B(r) = \frac{\mu_0 I}{2 \pi r} [/tex]
where
[tex]\mu_0 [/tex] is the vacuum permeability
I is the current in the wire
r is the distance from the wire at which the field is calculated

We see from the formula that the intensity of the field, B, is directly proportional to the current I, so if the current decreases, the magnetic field strength B decreases as well.

The image shows a pendulum that is released from rest at point A. Which energy transformation is correct? From A to C, kinetic energy is transformed into gravitational potential energy. From C to D, kinetic energy is transformed into gravitational potential energy. From C to E, gravitational potential energy is transformed into kinetic energy. From D to E, gravitational potential energy is transformed into kinetic energy.

Answers

Answer:

Partially: From C to D, kinetic energy is transformed into gravitational potential energy and From D to E, gravitational potential energy is transformed into kinetic energy

Explanation:

What happens in this pendulum is that at point A, there's only gravitational potential energy (no velocity=no kinetic energy)

At point C, it has maximum speed since all of the potential energy is transformed into kinetic energy (no potential gravitational  energy at this point)

At point E, it is the same as at point A. (no kinetic energy)

At the intermediate points (B and D) there are both kinetic and potential energy. At point B the kinetic energy is increasing and at point D it is decreasing.

Now let's see each case:

- From A to C, kinetic energy is transformed into gravitational potential energy: It is actually the opposite, so no.

- From C to D, kinetic energy is transformed into gravitational potential energy: Yes, but not all of it is transformed since it still has kinetic energy that allows it to get til point E.

- From C to E, gravitational potential energy is transformed into kinetic energy: No, it is the opposite.

- From D to E, gravitational potential energy is transformed into kinetic energy: Yes, but not all of it, since at point D it also has kinetic energy.

The kinetic energy is transformed into gravitational potential energy from point C to B. But complete transformation is not happening. Thus, the statement is somehow correct.

The analysis of pendulum is given as follows:

At point A, there's only gravitational potential energy and no kinetic energy, because the pendulum is at rest at A.   At point C, it has maximum speed since all of the potential energy is transformed into kinetic energy. Therefore, at this point there is only kinetic energy and no potential energy. At point E, it is the same as at point A, but in opposite side. So, at this point there is no kinetic energy. At  points B and D there are both kinetic and potential energy. At point B the kinetic energy is increasing and at point D it is decreasing.

Now as per the given statements:  

From A to C, kinetic energy is transformed into gravitational potential energy.  It is actually the opposite. Thus, the statement is incorrect. From C to D, kinetic energy is transformed into gravitational potential energy. At this interval, the kinetic energy is converting into potential energy but the conversion is not complete. Thus, the statement is somehow correct. From C to E, gravitational potential energy is transformed into kinetic energy. At this point, the kinetic energy is converting into the potential energy. Thus, the statement is incorrect. From D to E, gravitational potential energy is transformed into kinetic energy. This statement incorrect because there is conversion of kinetic energy into potential energy.

Thus, we can conclude that from C to D, the kinetic energy is transformed into gravitational potential energy, but the transformation is not complete. Hence, statement (B) is correct.

Learn more about energy conversion here:

https://brainly.com/question/22259212?referrer=searchResults

What type of collision is it if it bouunces of of each oyher?

Answers

that is an Elastic collision

How does a gas do work?

A. By changing volume
B. By creating energy
C. By conserving energy
D. By flowing

Answers

A gas does work by changing its volume, adhering to the law of conservation of energy and resulting in increases in energy, pressure, and/or temperature.

A gas can do work by changing its volume. When a gas in a cylinder expands, it exerts a force on the piston and moves it, doing work. According to the Ideal Gas Law, work done by a gas results in an increase in its energy, which can manifest as an increased internal kinetic energy due to the motion of its atoms and molecules. This concept adheres to the law of conservation of energy, meaning that energy within a closed system is neither created nor destroyed, but can change forms. An example of work being done by a gas is when you inflate a bicycle tire; the air pressure and temperature increase inside the tire due to the work done by the pump.

Thus, the correct answer to how a gas does work is A. By changing volume.

Tp-15 water current has the greatest effect on which type of boat?

Answers

Answer: Displacement sailboat

Displacement sailboat are stable even in strong water current for it was designed to glide through the water smoothly with a minimum of power for they have smooth lines and curves that gently move water out of its way. In displacement boat, the water moves gradually where less resistance against the boat is created and the boat ride is smooth and safer.

 

While some aspects are based on ____, body composition is largely a result of ____,


A. BMI;BMR

B. Diet;Excercise

C. Heredity;Lifestyle

D. Lifestyle;Heredity

Answers

Answer : Option C) Heredity; Lifestyle.

Explanation : While some aspects are based on heredity, body composition is largely a result of Lifestyle.

Even though it is believed that 80 percent of the aspects of a human body is heredity, but an individual body composition is largely influenced by the result of the lifestyle an individual lives.

Other Questions
What are the constants in x-3+2/3-y/2 There are many countries in Africa where French is one of the principals languages of the people TrueFalse Why is it important for writers to keep a record of their reviewed papers? The difference of a number and 8 is the same as 34 less the number. find the number. Use part 1 of the fundamental theorem of calculus to find the derivative of the function. y = cos x (3 + v5)8 dv sin x smallest country in mainland africa Erica is unconsciously fearful she did not get accepted into the college of her dreams. recently when asked, she refused to say she wanted to go there because, she said, "i would much rather stay closer to home and go to the community college." erica's comment best illustrates: A gas expands from a volume of 2.00L at 36.0oC to a volume of 2.50 L, what is the final temperature, if the pressure is constant? StudentStars Mazie7 Chris4 Jenni-3 Scott0 Michael2 Zoe4 Liza-5 Thomas-1 Benjamin6 Josie1 Chase8 David-4 Students in Mr. Miller's class gain and lose stars for behavior during the day. At the end of the week, any students with a negative star value must stay for detention. According to the chart who must serve detention? please show me how to answer this Bernard weighs 7.5 pounds at birth. assuming his development proceeds normally, he should weigh about _____ pounds by his first birthday. 22.5 24.5 20.5 18.5 QM Q2.) Find the multiplicities of the greatest zero, second greatest zero, and the smallest zero. What federal legislation guaranteed money deposited in banks?AAAWPAFDICCCC Find the sentence with the same meaning: Cest la voiture de ma tante. A girl throws a rock horizontally, with a velocity of 10 m/s, from a bridge. it falls 20 m to the water below. how far does the rock travel horizontally before striking the water, assuming negligible air resistance? The future of political parties in the united states is uncertain due to i. decline of third-party challenges ii. perceived differences between the parties iii. increase in split-ticket voting iv. lack of party reform What are epiphyseal fusions? what can they tell a forensic anthropologist? what is ethnobotany? why is this area helpful for forensic anthropologists? what is facial reconstruction? why is it used? how do male and female bones tend to differ? how does a forensic scientist estimate the height of a victim? If it takes 2 nurses 2 minutes to measure the blood pressure of 2 patients, how long would it take 200 nurses to measure the blood pressure of 200 patients (in minutes)? Which of the following microorganisms is unable to reproduce outside of a host? Bacteria Fungus Parasite Virus What is the area of domain or influence of medusa