The answer is salt water.
Salt water can conduct electricity or we can say that an electric current is conducted by salt water as salt water is a good conductor of electricity when salt that is sodium chloride or NaCl is dissolved in water , positively charged sodium (Na⁺) and negatively charged chlorine(Cl⁻) molecules are set apart by the water molecule so that they can float easily and freely. We can define the conductivity of a substance as the mobility or movement of ions. So as in water, sodium and chlorine are set apart and can move freely so it become a electrolyte that can conduct electricity.
An electric current can be conducted by [tex]\boxed{\text{a salt solution}}[/tex].
Further Explanation:
Electric current:
The movement of charge carriers (electrons or protons) or ions is termed as electric current. In other words, rate of flow of electric charge through a point. SI unit of electric current is Ampere (A).
On the basis of different abilities of substances to conduct electric current, these can be classified as follows:
Conductors:
These materials allow smooth flow of charge carriers without any resistance in their movement and therefore these conduct heat and electricity.
Insulators:
These materials allow resistance to flow of electric charge carriers and therefore act as bad conductors of heat and electricity.
Semiconductors:
These allow movement of electric charge carriers under certain conditions. These have electric conductivity less than that of conductors but more than insulators.
Sugar solution cannot produce any ions in solution. Since no charge carriers are present in sugar solution, it cannot conduct electric current.
Rubbing alcohol does not contain free ions in it and therefore it cannot conduct electric current.
Methane gas is covalent in nature and does not have any free ions in it so it cannot conduct electric current.
Salt solution is nothing but solution of NaCl in water. NaCl is ionic compound so ions are present in salt solution and therefore it conducts electric current.
Therefore electric current can only be conducted by salt solution.
Learn More:
1. How would you classify brass? https://brainly.com/question/9053565
2. The major contribution of Antoine Lavoisier to chemistry: https://brainly.com/question/2500879
Answer Details:
Grade: High School
Subject: Chemistry
Chapter: Metals and non-metals
Keywords: sugar solution, rubbing alcohol, methane gas, salt solution, electric current, electric charge carriers, conductors, insulators, semiconductors.
how many molecules are there in 9.34 grams of water
Answer: [tex]3.13\times 10^{23}molecules[/tex]
Explanation: To calculate the moles, we use the formula:
[tex]Moles=\frac{\text{Given mass}}{\text{Molar mass}}=\frac{9.34g}{18g/mol}=0.52mol[/tex]
1 mole of water contains=[tex]6.023\times 10^{23}molecules[/tex] of water
0.52 moles of water contain=[tex]\frac{6.023\times 10^{23}}{1}\times 0.52=3.13\times 10^{23}molecules[/tex] of water
One or more than one atoms bonds and makes up the molecules, it can be the same or different atoms that make up the compounds. Molecules present in the 9.34 gm of water are [tex]\rm 3.13 \times 10^{23}[/tex].
What is the formula for calculating molecules?Given,
Mass of the water (m) = 9.34 gm
The molar mass of the water (M)= 18 g/mol
From the mass and the molar mass number of the moles can be estimated:
[tex]\rm Moles (n) = \dfrac{\;\rm Mass}{\rm Molar \;mass}[/tex]
Substituting values in the above formula:
[tex]\begin{aligned}\rm n &= \dfrac{9.34\;\rm g}{18\;\rm g/mol}\\\\&= 0.52\;\rm mol\end{aligned}[/tex]
We know that,
1 mole of water = [tex]\rm 6.023 \times 10^{23}[/tex] molecules of water
0.52 moles of water = X molecules
Solving for X:
[tex]\begin{aligned} \rm X &= 0.52 \times \rm 6.023 \times 10^{23}\\\\&= \rm 3.13 \times 10^{23}\end{aligned}[/tex]
Therefore, [tex]\rm 3.13 \times 10^{23}[/tex] molecules are present.
Learn more about molecules here:
https://brainly.com/question/11444421
A. 50 g of nitrogen (n2) has a volume of ___ liters at stp.
Answer:
39.98 liters
Explanation:
The first you should know: At STP , 1 mole of any gas takes up 22.4 Liters of volume.
After, you will find the molecular weight (MW) of N2 with help of a periodic table.
Then N= 14,007 g
So:
N2 = 14,007 * 2
MW =28,014 g/ mol N2
Now you will start with the data of 50 grams of N2 and you obtain:
50 g N2 x 1 mol N2 x 22.4 L N2 = 39.98 L at STP 28,014 g N2 1 mol N2
50 g of nitrogen, N₂ has a volume of 40 L at standard temperature and pressure (stp)
We'll begin by calculating the number of mole in 50 g of N₂. This can be obtained as follow:
Mass of N₂ = 50 g
Molar mass of N₂ = 2 × 14 = 28 g/mol
Mole of N₂ =?Mole = mass / molar mass
Mole of N₂ = 50 / 28
Mole of N₂ = 1.786 moleFinally, we shall obtain the volume occupied by 1.786 mole of N₂ at STP. This can be obtained as follow:
At standard temperature and pressure (STP)
1 mole of N₂ = 22.4 L
Therefore,
1.786 mole of N₂ = 1.786 × 22.4
1.786 mole of N₂ = 40 L
Therefore, 50 g of N₂ occupies 40 L at standard temperature and pressure (STP).
Learn more: https://brainly.com/question/2493827
Calcium carbonate can break down to form calcium oxide and carbon dioxide. caco3 → cao + co2 the oxygen atoms on the product side are not balanced because there are only two oxygen atoms in co2 not balanced because there is only one oxygen atom in cao. balanced because the total number of oxygen atoms is 3. balanced when a coefficient of 3 is placed in front of co2.
The balanced chemical equation has been [tex]\rm 3\;CaCO_3\;\rightarrow\;3\;CaO\;+\;3\;CO_2[/tex].
The balanced equation can be given to follow the law of conservation of mass. with equal number of atoms of each elements has been present on the product and the reactant side.
The given equation has been written with addition of 3 as a coefficient to the carbon dioxide has been:
[tex]\rm CaCO_3\;\rightarrow\;CaO\;+\;3\;CO_2[/tex]
The number of elements of oxygen on product side has been 6 atoms for carbon dioxide and 1 oxygen atom for calcium oxide. The total oxygen on product side has been 7. The reactant has the presence of 3 oxygen atoms.
The reaction has been balanced with equal atoms on both the sides as:
[tex]\rm 3\;CaCO_3\;\rightarrow\;3\;CaO\;+\;3\;CO_2[/tex]
For more information about balanced equation, refer to the link:
https://brainly.com/question/8062886
By what factor does [h+ ] change for each ph change? (a) 3.20 units
Final answer:
The hydrogen ion concentration [H+] changes by a factor of 10 for each unit change in pH. Therefore, a pH change of 3.20 units results in a 10^3.20 (approximately 1,585-fold) change in [H+].
Explanation:
The pH scale is a logarithmic scale used to measure the acidity or basicity of an aqueous solution. The pH value is calculated by taking the negative logarithm of the hydrogen ion concentration ([H+]). For each unit change in pH, the hydrogen ion concentration changes by a factor of 10.
When considering a pH change of 3.20 units, you calculate the change in hydrogen ion concentration by raising 10 to the power of the pH change. Therefore, for each pH change of 1 unit, the [H+] changes by a factor of 10. Hence, for a change of 3.20 units:
A change of 1 unit corresponds to a 10-fold change in [H+].A change of 2 units corresponds to a 102 or 100-fold change in [H+].A change of 3 units corresponds to a 103 or 1,000-fold change in [H+].A change of 3.20 units corresponds to a 103.20 or approximately 1,585-fold change in [H+].For each pH change of 3.20 units, the [H⁺] concentration changes by a factor of approximately 1584.89.
A change of one unit on the pH scale represents a change in the [H⁺] concentration by a factor of 10. Consequently, a change of two units represents a change in the [H⁺] concentration by a factor of 100. For a change of 3.20 units, the factor is 103.20.
Calculating this, we get:
103.20 = 1584.89
Therefore, the [H⁺] concentration changes by a factor of approximately 1584.89 for a pH change of 3.20 units.
Select the correct text in the passage. Which sentence incorrectly describes the formation of petroleum
About 300 million years ago, the seas and oceans were inhabited by tiny plants and other organisms. These organisms died and were buried on the ocean floor. Over time, their bodies were covered with silt and mud that was rich in organic material, forming layers of organic matter. This matter was subjected to high temperature and pressure. In such conditions, oxygen was available in abundance. Over a period of many years, the matter decomposed and formed oil and gas.
the answer is: in such conditions, oxygen was available in abundance.
How many moles of NH4NO3(s) must be dissolved in water so that 73.0 kJ of heat is absorbed from the water? (The molar heat of solution of NH4NO3 is 25.7 kJ/mol.)
Answer:
2.84 mol
Explanation:
If a reaction mixture initially contains 0.195 m so2cl2, what is the equilibrium concentration of cl2 at 227 ???c?
The equilibrium concentration of cl2 at 227C is mathematically given as
[Cl2] = 2.4X10^-4 m
Equilibrium concentrationQuestion Parameters:
If a reaction mixture initially contains 0.195 m so2cl2
concentration of cl2 at 227
Generally the equation for the Chemical Reaction is mathematically given as
SOCl2 ⇄ SO2 +Cl2
Therefore
[tex]K=\frac{ [SO2][Cl2]}{SOCl2}[/tex]
2.99X10^-7 = (X)(X)/(0.195-X)
X = 0.00024 = 2.4 X10^-4
[Cl2] = 2.4X10^-4 m
For more information on Chemical Reaction
https://brainly.com/question/11231920
which compound has the greatest percent composition by mass of sulfur
3 Na2O(aq) + 2 Al(NO3)3(aq) ----> _ Compound A + _ Compound B
If the Sun were much smaller than its current size, what effect would this have on eclipses?
What might you expect to observe from this double-displacement reaction: CoCl2(aq) + Na2SO4(aq) ---> CoSO4 + 2NaCl?
Edit
A. CoSO4 precipitate will form.
B. NaCl precipitate will form.
C. one of these products will bubble out as a gas.
D. There will be no chemical change because there will be no chemical reaction; the ions will remain suspended in the water solution.
The process that fuels a star is BEST described as________.
Sensors detect the concentration of mercaptan molecules in natural gas at various distances from a leaking source. At which location will a sensor detect the highest concentration of mercaptan?
This is the answer but I need to know why this one.
(one-half meter in front of the source)
Calcium Chloride can be represented by the chemical formula of?
Answer:
CaCl2
Explanation:
Calcium: Ca
Chloride or chlorine: Cl
Chloride: it is name of chlorine when it has a ion
calcium has a charge of +2 and Chlorine has a charge of -1
this is a ionic bond, so the charges of the two atoms have to equal or cancel out, so u need two Chlorine
and then it will be calcium +2 and chloride -2
2-2=0, they are neutral and we are right
CaCl2
Which of the following changes will increase the amount of solid solute able to be dissolved in a liter of liquid water?
A. increasing temperature
B. increasing surface area
C. decreasing temperature
D. decreasing pressure
The philosopher Socrates was executed using which poison?
Answer:
Hemlock poison is your answer
The chart shows the speed at which light travels through different media. In which medium would light have the longest wavelength?
water
air
glass
diamond
Answer : Option B) Air
Explanation : As the speed of light depends on the refractive index of the medium; then according to Snell's law (refer the attachment) Air is the medium that would have the longest wavelength amongst the given options.
As the refractive indexes of water is 1.33, glass is 1.5 and diamond 2.42 are much higher than air. Therefore, it will be the medium which will allow maximum light to pass through it easily and hence, will be the medium with longest wavelength.
The correct answer is air.
The refractive indexes of air, water, glass and diamond are1.0003, 1.33, 1.5 and 2.42 respectively. The refractive index of air is the lowest so it is the medium through which light will travel faster with the longest wavelength. The higher the refractive index the denser the medium and the slower is the speed with which light will travel through this medium.
What volume of pocl3 gas can be produced in theory when 194 g of pcl3 gas reacts with excess oxygen?
Answer:
V = 2.28 L
Explanation:
What volume of pocl3 gas can be produced in theory when 194 g of pcl3 gas reacts with excess oxygen? at STP
1. Determine moles PCl3.
The reaction
2PCl3+O2--------->PClO3
mole =mass/molecular mass
194 grams/137.3334 grams/mole =
0.102 moles PCl3
2. Get the moles of POCl3 produced from 0.102 moles PCl3.
from the reaction above
2 moles PCl3 produce 2 moles POCl3
PClO3=0.102mole
3. Find the volume PClO3 using ideal-gas equation: PV = nRT
where:
P = pressure = 1 atm (standard pressure)
V = volume ?
n = moles PClO3 = 0.102 moles PClO3
R = gas constant = 0.08206 L*atm/mol*K
T = temperature = 273.15 K (standard temperature)
(1 atm)*V = (0.102 moles)*(0.08206 L*atm/mol*K)*(273.15 K)
V = 2.28 L
How many hydrogen atoms are there in 3.50 grams of methane?
What is the main goal of sustainable agriculture?
A. To rely heavily on mechanization, pesticides, and fertilizers
B. To produce cheap and abundant food at a high cost
C. To feed a growing world without damaging the ecosystem
D. To increase farming efficiency and profits
In order to practice sustainable agriculture, less external energy must be used, and renewable energy sources must take their place. To feed a growing world without damaging the ecosystem is the goal of sustainable agriculture. The correct option is C.
Crop rotation, the process of rotating various crops in the same area, helps maintain the soil's health and productivity by creating a mix of nutrients. This may lessen the need for pesticides and fertilizers to kill weeds and insects.
Agriculture that is sustainable generates a lot of food without consuming too many resources or harming the environment. Agriculture develops self-sustaining agricultural and livestock-raising systems that are, like nature, based on natural principles.
Thus the correct option is C.
To know more about sustainable agriculture, visit;
https://brainly.com/question/23857554
#SPJ6
What does the frequency of a wave represent?
1. the distance between 2 consecutive crests
2. the number of wave cycles that pass through a specific point within a given time period
3. the distance between the highest and lowest points of a wave
4. the length of a wave that pass through a specific point within a given time period,
its actually answer 2
Check my answers please? Only 5...Will reward medal to best answer and perhaps become a fan! :)
1. Which curve or point of a phase diagram would indicate the melting point at various temperatures and pressures?
triple point
fusion curve <---
sublimation curve
critical point
A forest has a stable population of approximately 100 great horned owls. The owls nest in hollow trees, eat small animals, and have no predators. One year, a large new housing development is built, destroying half of the forest. How will this impact the carrying capacity of the forest and the owl population within the forest?
A. The carrying capacity will increase and the owl population will increase.
B. The carrying capacity will decrease and the owl population will decrease.
C. The carrying capacity will increase and the owl population will decrease.
D. The carrying capacity will decrease and the owl population will increase.
The correct answer is B. The carrying capacity will decrease and the owl population will decrease.
Explanation:
In ecology, the carrying capacity refers to the number of organisms an ecosystem or area can sustain because it provides water, shelter, food, etc. This carrying capacity decreases due to the destruction of habitat or natural disasters that reduces the resources or habitable area.
This implies, in the case presented, the carrying capacity of the forest will decrease because the resources on in for owls are reduced to half due to housing development. Besides this, it is expected the owl population decreases because with less food, water, and other resources such as trees to nest ess owls will survive and reproduce. Thus, in this case, "the carrying capacity will decrease and the owl population will decrease".
The density of gasoline is 0.65 g/ml. what is the mass in kg of 45.0 l (about 12 gal) of gasoline?'
The mass of a substance can be determined from the density and volume of the substance. The mass of gasoline with 0.65 g/ml density and 45 L volume is 29.25 Kg.
What is density?Density of a substance is the measure of its mass per volume. Thus it is the ratio of its mass to the volume. Density of a substance depends on the temperature, pressure, bond type etc other than mas and volume.
Mass of the substance is the total amount of the substance expressed in g, kg or mg. The mass multiplied by the gravity experienced by the body is called its weight.
Volume of a substance is the total space occupied by the substance. Volume is expressed in cm³, Liter, milliliter etc.
Here the density of the substances is given 0.65 g/ml and volume is 45 liter or 45000 ml. Mass can be calculated by multiplying density with volume.
Mass = density × volume.
= 0.65 g/ml × 45000 ml
= 29250 g
= 29.25 g.
Hence, mass of the substance is 29.25 g.
To find more about density, refer the link below:
https://brainly.com/question/15164682
#SPJ5
Over time, an iron nail reacts with water to produce iron oxide, or rust. Which of the following is a signal that rusting has taken place?
Explanation:
When iron reacts with the moisture present in air then an oxide layer tends to develop on the surface of iron. This process is known as rusting of iron.
Chemical formula of rust is [tex]Fe_{2}O_{3}.xH_{2}O[/tex]. This layer of oxide on the surface of iron is orange-brown in color.
This change is a chemical change as a new compound iron oxide has formed in this process of rusting.
Hence, this orange-brown color on the surface of iron helps us to know that rusting has taken place.
Given 7.35g of butanoic acid and excess ethanol, how many grams of ethyl butyrate would be synthesized, assuming a complete 100% yield
identify two metalloids that have the same number of electrons shells krypton
B and Si
Ge and As
Sb and Te
B and At
Answer;
Ge and As.
Explanation;
Elements Ge and As belong in the same period as krypton.
Each row of the periodic table is called the period.
Elements in each period have the same number of electron shells.
These elements in the same period do not have similar properties- the properties change greatly across every period. Krypton is in period four therefore all the elements in period 4 have four electrons shells.
The molar mass of argon is 40 g/mol. what is the molar mass of a gas if it effuses at 0.91 times the speed of argon gas?
Answer : The molar mass of a gas is, 48.3 g/mole
Solution : Given,
Molar mass of argon gas = 40 g/mole
According to the Graham's law, the rate of effusion of gas is inversely proportional to the square root of the molar mass of gas.
[tex]R\propto \sqrt{\frac{1}{M}}[/tex]
or,
[tex]\frac{R_1}{R_2}=\sqrt{\frac{M_2}{M_1}}[/tex]
where,
[tex]R_1[/tex] = rate of effusion of a gas
[tex]R_2[/tex] = rate of effusion of argon gas
[tex]M_1[/tex] = molar mass of a gas
[tex]M_2[/tex] = molar mass of argon gas
As per question,
[tex]R_1=0.91\times R_2[/tex]
Now put all the given values in the above formula, we get the molar mass of a gas.
[tex]\frac{0.91\times R_2}{R_2}=\sqrt{\frac{40g/mole}{M_1}}[/tex]
[tex]M_1=48.30g/mole[/tex]
Therefore, the molar mass of a gas is, 48.3 g/mole
The atoms and molecules in a liquid are in constant motion. As temperature decreases, what is true of the particles in the liquid? the rate of particle movement decreases the distance between the particles increases the attraction between the particles decreases the potential energy of the particles increases
a) The rate of particle movement decreases as temperature decreases, causing the atoms and molecules in the liquid to move less energetically.
The atoms and molecules in a liquid are in constant motion. As temperature decreases, the kinetic energy of these particles decreases as well.
This is because temperature is directly related to the average kinetic energy of the particles in a substance. Therefore, as the temperature drops, the particles move more slowly.
Here's a step-by-step explanation:
The decrease in the temperature of a liquid leads to a reduction in the thermal energy provided to the particles.
Kinetic energy, the energy of motion, is directly proportional to temperature, which measures the average kinetic energy of particles, indicating a decrease in temperature.
Particles' movement decreases with less kinetic energy, resulting in slower and slower particles.
The distance between particles may decrease due to stronger attractive forces at lower kinetic energies, but option b (distance increases) is incorrect as particles come closer together as they lose energy.
The attraction between particles decreases with decreased kinetic energy, causing them to pull closer together, contradicting option c.
Particles' potential energy decreases as they move closer in a stable configuration at lower temperatures.
Correct Question:
The atoms and molecules in a liquid are in constant motion. As temperature decreases, what is true of the particles in the liquid?
a) the rate of particle movement decreases
b) the distance between the particles increases
c) the attraction between the particles decreases
d) the potential energy of the particles increases
A certain object has a volume of 25.0 mL and a mass of 100 g. What is the density of the object?