An investment firm wants to create a billboard that displays an enlarged $1,000,000 bill. The actual size of the bill is 2.61 inches by 6.14 inches. If the billboard is 48 feet wide, what's the scale of the bill to the billboard?

A. 1′ = 8.71″
B. 1′ = 7.81″
C. 1″ = 8.71′
D. 1″ = 7.81′

The total number of people that all the cars can hold is greater than 480 and less than 500 people.

A:  According to the given situation, where both the number of trolley cars and the number of people in each car must have two digits and be less than 30.

Hence, the possible number of trolley cars in the park = 22 and a possible number of people in each car= 22

B: explain how you found your answer.

Lets suppose the number of cars be =c and the number of persons be= p

As the number of cars and number of person are same, so c=p

so, [tex]c\times c[/tex] should lie the given range of 480 to 500.

Now, the nearest perfect square that lies between 480 and 500 is 484.

The square root of 484 is 22. So, the number of cars and people are 22.

C: This is the only hit and trial method for solving this question.

The answer is D because it passes the horizontal line test.  

1. Factor x^3 + 9x^2 + 6x - 16 using Polynomial Division

(x^2 + 10x + 16)(x -1)

2. Factor x^2 + 10x + 16

(x + 2)(x + 8)(x - 1)

Answer: x - 1

Answer:

x - 1

Step-by-step explanation:

width = volume / height * length

= x^3 + 9x^2 + 6x - 16 / (x + 2)(x + 8)

Since the volume ends in -16  and  last term of denominator

= +2 * + 8 = +16  the least term of the width will be - 1.

Also x^3 / x^2 = x

so the answer is (x - 1)

I'm confused too and I'm supposed to be an expert.  I'm not entirely sure what frequency density is.  We'll just treat this as a histogram.

Let's assume each five minute interval gives a value equal to or proportional to the number of people that finished in that interval.

From 0 to 50 we have 10 intervals; let's just make this into a table

0-5  0

5-10 40

10-15 40

15-20 30

20-25 30

25-30 25

30-35 25

35-40 25

40-45 25  

45-50 15

From 0 to 40 that adds up to

0+40+40+30+30+25+25+25 = 215

From 0 to 50 that's

215+25+15 = 255

The fraction less than 40 is 215/255 = 43/51 ≈ .843

Answer: 84.3%

Answer:

84.3%

Step-by-step explanation:

Total frequency is the total area:

Add all the areas

To find each area:

Frequency density × class width

Total frequency:

40×10 + 30×10 + 25×20 + 15×5

= 1275

Less than 40:

Bar 1 + Bar 2 + some part of Bar 3

40×10 + 30×10 + 25×15

= 1075

Percentage (<40) = 1075/1275 × 100

= 4300/51

= 84.31372549%

Plug the x-values from the table into the given equation and solve for y.

y = 5 - x²

First column

replace x with -2

y = 5 - (-2)²

  = 5 - (4)

  = 1

(x, y) = (-2, 1)

Second column

replace x with -1

y = 5 - (-1)²

  = 5 - (1)

  = 4

(x, y) = (-1, 4)

Third column

replace x with 0

y = 5 - (0)²

  = 5 - (0)

  = 5

(x, y) = (0, 5)

Fourth column

replace x with 1

y = 5 - (1)²

  = 5 - (1)

  = 4

(x, y) = (1, 4)

Fifth column

replace x with 2

y = 5 - (2)²

  = 5 - (4)

  = 1

(x, y) = (2, 1)

Answer:

2.897

Step-by-step explanation:

Let us find the mean and variance for the sample first.

105 104 110 112

114 106 108 109

Mean = sum/8 = 108.5

Variance = 12

Std dev = sq rt of variance = 3.464

Std error = std dev/ sq rt n

since n =8, we get std error = 1.225

Since sample size is small, df =8-1 =7

For 95% confidence intervals, t critical value for two tailed=2.365

Margin of error = std error x t critical = 1.225(2.365)

=2.897

I'd like to answer your question but there's not enough information.

Answer:

there needs to be a better explantion

Step-by-step explanation:

Final answer:

To estimate the cost of 7.8 pounds of potatoes at a price of $3.25 per pound, multiply the price by the number of pounds, resulting in a total estimated cost of $25.35.

Explanation:

We need to estimate the cost for 7.8 pounds of potatoes given that potatoes cost $3.25 per pound. To do this, we multiply the price per pound by the number of pounds:

Cost = Price per pound × Number of pounds

Cost = $3.25 × 7.8 pounds

After performing the multiplication, we find that:

Cost = $25.35

Therefore, the estimated cost for 7.8 pounds of potatoes at a price of $3.25 per pound is $25.35.

Answer:

[tex]36.1[/tex] square feet of floor was carpeted.

Step-by-step explanation:

Number of Square feet = Length of the room * Width of the room

Now we have to substitute the values to the above equation,

Number of square feet = [tex]20\frac{1}{2} *15\frac{3}{5}[/tex]

                                      =[tex]\frac{41}{2} +\frac{78}{5}[/tex]

                                      =[tex]\frac{205+156}{10}[/tex]

                                      =[tex]\frac{361}{10}[/tex]

                                      =[tex]36.1[/tex] feet

That's true. If A is a subset of B, it means that every element in A is also an element in B. This means that B has, at least, as many elements as A. Nothing prevents B from having more elements though, which don't belong to A.

Consider this example:

[tex] A = \{1,2,3,4\},\quad B=\{1,2,3,4,5,6\} [/tex]

A is a subset of B, because every element of A (1,2,3,4) is also an element of B (1,2,3,4 are in B as well).

Still, B has two more elements (5,6) which don't belong to A, so a superset can have (and typically does actually) more elements than its subset.

Final answer:

The statement is true; if set A is a subset of set B (A⊂B), it means all elements of A are also in B, but B can have more elements.

Explanation:

The statement If a ⊂ b, b may have more elements than a is true. In set theory, the symbol ⊂ denotes that one set is a subset of another. If we say that set A is a subset of set B (A⊂B), it means that all elements of A are also in B. However, B can have additional elements that are not in A, which would make it larger. To illustrate, if we have A = {1,3} and B = {1,2,3,4}, A is a proper subset of B because all elements of A are in B, but B has more elements (2 and 4) that are not in A. If A and B were identical, then we would say A = B, not A⊂B.

He spent roughly $903

Answer: 903

Step-by-step explanation:

Answer:

Option B.

B. 5/2 cups of sugar, 19/6 cups of flour

Step-by-step explanation:

Given that Imogen is baking a cake.

The cake  requires two and one-half cups of sugar and three and one-sixth cups of flour.

Sugar required = 2 1/2

To make it improper fraction, we make the integer as a fraction with denominator 2

i.e. 2 1/2 = 2+1/2 =4/2 +1/2

Now we can add these

= 5/2

So 5/2 cups of sugar is required.

Similarly flour required=3 1/6

To make it improper we convert 3 into a fraction with denominator 6.

3=18/6

3 1/6 = 3+1/6 =18/6+1/6 = 19/6

Hence 19/6 cups of flour required.

Convert the equations to slope/intercept form:-

4x + 4y = 1

4y = -4x + 1

y = -1x + 1/4     The slope of this line is -1

x + y = -8

y = -1x - 8  This also has a slope of -1

So B is true.  The lines are parallel.

Final answer:

The two lines with equations 4x+4y=1 and x+y=-8 are parallel because they both have the same slope of -1. They do not intersect at the point (0,-8), nor do they share the same x-intercept since their x-intercepts are different when y=0.

Explanation:

To determine the relationship between the two lines with equations 4x+4y=1 and x+y=-8, we should first put them in slope-intercept form, which is y = mx + b, where m represents the slope and b the y-intercept.

For the first equation, dividing every term by 4 yields y = -x + 0.25, which has a slope of -1. For the second equation, we can see directly that rearranging it gives y = -x - 8, which also has a slope of -1.

Since both lines have the same slope, they are parallel. To check if they intersect at the point (0,-8), we can substitute x=0 into both equations. The first equation gives y = 0.25, which is not -8, so they do not intersect at (0,-8). For the x-intercepts, we set y=0 in both equations. The first gives x = 0.25, and the second gives x = -8, so they do not share the same x-intercept either.

Therefore, the correct answer is B. The lines are parallel.

[tex]-10 < -2x+4\leq8\ \ \ \ |-4\\\\-14 < -2x\leq4\ \ \ \ |\text{change the signs}\\\\14 > 2x\geq-4\ \ \ \ |:2\\\\\boxed{7 > x\geq-2}\to\boxed{-2\leq x < 7}[/tex]

Answer: D) $19.37

Step-by-step explanation: usatestprep approved

The length of the fabric is 4 cm.

To find the length of the piece of fabric, we need to divide the area by the width. The area of the fabric is given as 20 cm squared and the width is given as 5 cm. So, to find the length, we divide 20 cm squared by 5 cm:

Length = Area / Width

Length = 20 cm2 / 5 cm

Length = 4 cm

Therefore, the length of the piece of fabric is 4 cm.

https://brainly.com/question/15469997

#SPJ2

The correct answer is x=-3.

Given equation:

[tex]\frac{4}{3}x-7 = -11[/tex]  ----- (A)

To solve the above equation, follow these steps:

Step-1:

Add 7 on both sides of equation (A):

(A)=> [tex]\frac{4}{3}x -7 + 7 = -11 + 7 \\ \frac{4}{3}x = -4[/tex]

Step-2:

Multiple 3 on both sides, you will get:

[tex]\frac{4}{3}x * 3 = -4 * 3 \\ 4x = -12 \\ x = -3[/tex]

Hence the correct answer is x=-3.

Answer:

The value of x is -3.

Step-by-step explanation:

Given equation:

4/3 x-7=-11

By adding 7 to both sides of equation:

= 4/3x - 7 + 7 = -11 + 7

= 4/3x = -4

By multiplying 3 on both sides

= 4/3x × 3 = -4 × 3

= 4x = -12

By dividing 4 on both sides of equation:

= 4x/4 = -12/4

= x = -3

Hence by solving equation, the value of x out to be -3.

Answer:

In these functions translation is used.

The transformation means that vertex of function m(s) is translated 18 units downwards.

Step-by-step explanation:

We have been given that average gas mileage m in miles per gallon for a compact car is modeled by  m(s) = - 0.015(s - 47)2 +33 and mileage for an SUV is modeled by my(s) = -0.015(s - 47)2 + 15.

We can see that both functions are parabolic and opens downwards. The vertex of function m(s) is (47,33), while vertex of function my(s) is (47,15). We can describe this change by translation.

This transformation means that function m(s) is translated 18 units downwards and average mileage of SUV is 18 miles/hour lesser than compact car at equal speeds.

The change is a vertical shift, meaning that the SUV's gas mileage drops lower than the compact car's at the same speed, but the rate at which the mileage decreases with speed is identical.

The transformation that describes the change from the compact car's gas mileage model to the SUV's model is a vertical shift. This is because the two equations are identical, except for the constant at the end (33 in the compact car's equation and 15 in the SUV's equation). This constant indicates the vertical position of the parabola described by the equation, so by changing the constant, you're vertically shifting the parabola without changing its shape or orientation.

A vertical shift of the parabola in this context means that the SUV's gas mileage drops lower than the compact car's gas mileage at the same speed. The number being subtracted from the parabola to achieve the shift (-0.015(s - 47)2) remains the same for the SUV and the compact car, meaning the rate at which the mileage changes with speed is the same, but the overall mileage of the SUV is lower due to the difference in constants (33 for the compact car and 15 for the SUV).

https://brainly.com/question/33499854

#SPJ3

Answer:

28

Step-by-step explanation:

Answer:

It is the 2 one sweetheart.

Step-by-step explanation:

Answer:

k(x) = x^2 and j(x) = -x^2

Step-by-step explanation:

The higher the coefficient, the steeper the graph. So the ones that work have to be less than 2.

It can't be 3x^2 because 3 is greater than 2x^2.

It can't be -3x^2 because -3 is the same as 3 except on the other side of the graph, and 3 is greater than 2.

It can't be -2x^2 because it has equal steepness as 2x^2, except it's on the opposite side of the graph.

It is x^2 because 1 is less than 2 in 2x^2, so it's less steep.

It is -x^2 because -1 is the same as 1 except on the other side of the graph, and 1 is less than 2.

Hope this helps!

A function maps a given input to a single output, increasing the values of

the factors increases the output and steepness of the function.

The functions that have graphs that have graphs that are less steep than f(x) = 2·x² are;  k(x) = x², and j(x) = -x²

Reasons:

The steeper the graph, the larger the ratio of the Rise to Run of the graph.

Therefore, increasing the multiple of the input of the graph increases the

Rise to Run ratio and therefore the steepness of the graph as follows;

Between points x = 1, and x = 2, for m(x) = 3·x², we have;

[tex]Slope = \dfrac{m(2) - m(1)}{2 - 1} = \dfrac{3 \times 2^2 -3 \times 1^2 }{2 - 1} = \dfrac{12 - 3}{2 - 1} = 9[/tex]

For k(x) = x², we have;

[tex]Slope = \dfrac{k(2) - k(1)}{2 - 1} = \dfrac{ 2^2 - 1^2 }{2 - 1} = \dfrac{4 - 1}{2 - 1} = 3[/tex]

Therefore;

The graphs of k(x) = x², and j(x) = -x², are less steep than f(x) = 2·x².

Learn more here:

https://brainly.com/question/13876258

https://brainly.com/question/806542

Let [tex] x,y [/tex] be the lengths of the original legs. The original area is thus

[tex] \dfrac{xy}{2} [/tex]

Now, we triple the legs, so we have [tex] (x,y)\mapsto(3x,3y) [/tex]

The new area is

[tex] \dfrac{(3x)(3y)}{2} = \dfrac{9xy}{2} = 9\dfrac{xy}{2} [/tex]

which is 9 times the original area.

So, if you triple both legs, the area will be nine times as much as the original one.

[tex]x^3+8y^6\\\\=x^3+2^3y^{2\cdot3}\\\\=x^3+2^3(y^2)^3\qquad|\text{used}\ (a^n)^m=a^{nm}\\\\=x^3+(2y^2)^3\qquad|\text{used}\ (ab)^n=a^nb^n\\\\=(x+2y^2)(x^2-x\cdot2y^2+(2y^2)^2)\qquad|\text{used}\ a^3+b^3=(a+b)(a^2-ab+b^2)\\\\=(x+2y^2)(x^2-2xy^2+2^2(y^2)^2)\\\\=(x+2y^2)(x^2-2xy^2+4y^4)[/tex]

Answer:

K12 Here 100% verified

Step-by-step explanation:

b – 2a – c

9 - 2(-3) - (-6) = ?

9 - 2(-3) - (-6) = 21

[tex]a_n=2^n\\\\a_1=2^1=2\\\\a_2=2^2=4\\\\a_3=2^3=8\\\\a_4=2^4=16\\\\Answer:\ C.\ \{2,\ 4,\ 8,\ 16\}[/tex]