An open box with a square base is to be made from a square piece of cardboard 24 inches on a side by cutting out a square from each corner and turning up the sides. If the volume V of the box is a function of the length x of the side of the square cut from each corner, for what value of x is V the largest

Answer:

The correct answer is letter "C": what-if analysis.

Explanation:

A what-if analysis is a study an individual or company makes about a certain number of events where variables are changed to determine what the outputs would be. This approach is normally implemented when there is limited information from where to make a concise decision. Then, individuals have to outline all the possible results to find out what their risks are.

Software like Microsoft Office Excel facilitates the implementation of what-if analysis.

Answer: the sample size should be 39

Step-by-step explanation:

The sample mean is the point estimate for the population mean. Confidence interval is written as

Sample mean ± margin of error

Margin of error = z × σ/√n

Where

σ = population standard Deviation

n = number of samples

z represents the z score corresponding to the confidence level

From the information given,

σ = 4 minutes

Margin of error = 75 seconds. Converting to minutes, it becomes 75/60 = 1.25 minutes

To determine the z score, we subtract the confidence level from 100% to get α

α = 1 - 0.95 = 0.05

α/2 = 0.05/2 = 0.025

This is the area in each tail. Since we want the area in the middle, it becomes

1 - 0.025 = 0.975

The z score corresponding to the area on the z table is 1.96. Thus, confidence level of 95% is 1.96

Therefore,

1.25 = 1.96 × 4/√n

1.25/1.96 = 4/√n

0.6378 = 4/√n

√n = 4/0.6378 = 6.27

n = 6.27² = 39

Answer: 13

Step-by-step explanation:

1. Harry has 20/20 sweets

2. Nadia takes 7/20 sweets

3. Your left with 13/20

The fraction of the 20 sweets Harry has now is 13/20.

A fraction represents a portion of a total. This entire may refer to a place or a group of places. The Latin word "fraction," which means "to break," is the source of the English term "fraction." The distribution of food and supplies as well as the lack of a metal currency were among the mathematical issues that the Egyptians utilized fractions to solve because they were the first civilization to understand fractions.

Only verbal descriptions of a portion of the whole were used to write fractions in ancient Rome. The numerator and denominator of fractions are first written in India with one number above the other but without a line. The line used to divide the numerator and the denominator were only added by Arabs.

Given:

The total no of sweets Harry has is 20,

The no of sweets given to Nadia is 7,

So the no of sweets left = 20 -7 = 13

Hence, the faction will be,

F = No of sweets left / total no of sweets harry has

F = 13 / 20

Therefore, the 13 / 20 parts of sweets Harry has now.

To know more about fractions:

https://brainly.com/question/10354322

#SPJ2

Step-by-step explanation:

8p + 5 = 6p + 1

8p - 6p = 1 - 5

2p = - 4

p = - 4/2

p = -2

Hope it will help :)

Answer:

C) Reject [tex]H_0[/tex] if t < -1.711

Step-by-step explanation:

We are given that a certain chemical pollutant in the Arkansas River has been constant for several years with mean μ = 34 ppm (parts per million).

Also, it is given that the level of significance is 0.05 and a sample size of 25 is taken.

Let [tex]\mu[/tex] =  average chemical pollutant in the Arkansas River

So, Null Hypothesis, [tex]H_0[/tex] : [tex]\mu[/tex] = 24 ppm     {means that the average is same as before with improved filtration devices}

Alternate Hypothesis, [tex]H_A[/tex] : [tex]\mu[/tex] < 24 ppm      {means that they have lowered the average with improved filtration devices}

Now, t test statistics is given by; T.S.  =  [tex]\frac{\bar X -\mu}{\frac{s}{\sqrt{n} } }[/tex]  ~ [tex]t_n_-_1[/tex]

where, n = sample size = 25

n - 1 = degree of freedom = 25 - 1 = 24

Now, at 0.05 significance level in the t table, the critical value at 24 degree of freedom is given as - 1.711 for left tailed test.

So, we will reject our null hypothesis when the t test statistics is less than the critical value of t which means reject null hypothesis if t < -1.711.

Answer:

x=-3

Step-by-step explanation:

The x values repeat and the y values are different that means its a vertical line

so it must be x=something the x value in both is -3 so

x=-3

Answer:

x=.3

Step-by-step explanation:

the x is same and y is not meaning a vertical line

Answer: Four Curricula

Step-by-step explanation:

Business

Mathematics

History

Social Science

Answer:

Four Curricula

Answer:

Option A) 0.038

Step-by-step explanation:

We are given the following in the question:

Sample size, n = 100

Number of of bags of tortilla chips that contain more than the label states, x = 18

Sample proportion:

[tex]\hat{p} = \dfrac{x}{n} = \dfrac{18}{100} = 0.18[/tex]

Formula for standard of error:

[tex]\sqrt{\dfrac{\hat{p}(1-\hat{p})}{n}}[/tex]

Putting the values, we get:

[tex]\sqrt{\dfrac{0.18(1-0.18)}{100}} =0.038[/tex]

Thus, the correct answer is

Option A) 0.038

The probability calculations for the bowler indicate that she has a 0.33% chance of not getting a strike for three consecutive frames, a 1.9% chance of getting her first strike in the third frame, a 99.66% chance of getting at least one strike in the first three frames, and a 3.4% chance of bowling a perfect game.

The subject here is probability, with the scenario provided being that a bowler can strike 85% of the time. We assume that all strikes are independent events, meaning one strike does not affect the probability of the next strike.

The probability of her not getting a strike in one turn is 1 - 0.85 = 0.15 (the complement of her strike rate). For three consecutive frames without a strike, we multiply these probabilities because of their independence: 0.15 * 0.15 * 0.15 = 0.003375 or 0.33%.

This means not striking in the first two frames and getting a strike in the third. Calculate this by multiplying the probabilities: 0.15 * 0.15 * 0.85 = 0.01912 or 1.9%.

This is best calculated by subtracting the probability of no strikes in 3 frames (found in part a) from 1, as it is the complement: 1 - 0.003375 = 0.996625 or 99.66%.

A perfect game requires 12 consecutive strikes. Multiply the probability of a strike (0.85) by itself 12 times : 0.85^12 = 0.034 (3.4% chance of a perfect game).

https://brainly.com/question/32117953

#SPJ11

The step-by-step probabilities for varying scenarios in a bowling game are: a) 0.003375 for no strikes in three frames, b) 0.019125 for the first strike in the third frame, c) 0.996625 for at least one strike in three frames, and d) 0.1489 for a perfect game.

Probability Calculations for a Bowler

A certain bowler has an 85% chance of bowling a strike. Let's break down each part of the question:

a) Probability of three consecutive frames without a strike

The probability of not getting a strike in one frame is 1 - 0.85 = 0.15. Therefore, the probability of not getting a strike in three consecutive frames is:

(0.15) × (0.15) × (0.15) = 0.003375

b) Probability of making the first strike in the third frame

The probability of not getting a strike in the first two frames but getting a strike in the third frame is:

(0.15) × (0.15) × (0.85) = 0.019125

c) Probability of at least one strike in the first three frames

First, find the probability of no strikes in three frames, which we've already calculated as 0.003375. Therefore, the probability of at least one strike is:

1 - 0.003375 = 0.996625

d) Probability of a perfect game (12 consecutive strikes)

The probability of getting a strike in each of the 12 frames is:

(0.85)¹² = 0.1489

Answer:

✔ wrote as addition of the additive inverse

✔ wrote terms as addition of opposite

✔ grouped like terms

✔ combined like terms

The expression is subtracted and the equivalent value is -9x³ + 6x + (-10).

Given data:

To find the difference between -3x³ + 5x² + 4x - 7 and 6x³ - 2x + 3, Lorne would follow these steps:

(-3x³) + 5x² + 4x + (-7) + (-6x³) + 2x + (-3)

Here, Lorne is combining like terms by grouping the variables and constants separately.

[(-3x³ + (-6x³))] + [(5x² + 2x)] + [(-7 + (-3))]

This step involves simplifying the expressions within each set of parentheses.

On simplifying the equation:

A = -9x³ + 6x + (-10)

Hence , the equation is A = -9x³ + 6x + (-10).

To learn more about equations click :

https://brainly.com/question/19297665

#SPJ2

Step-by-step explanation:

14 : 10 : 4

Divide it by 2

7 : 5 : 2

This is the simplest form because it cannot be divided further

Answer:

There is 95% confidence that the population proportion of people from Vermont who exercised for at least 30 minutes a day 3 days a week is between 55.9% and 74.7%.

Step-by-step explanation:

We have to answer the population proportion for Vermont.

We can only do it by a confidence interval, as we only have information from a sample.

This sample, of size n=100, has a proportion p=0.653.

The degrees of freedom are:

[tex]df=n-1=100-1=99[/tex]

We will calculate a 95% confidence interval, which for df=99 has a critical value of t of t=1.984.

The margin of error can be calculated as:

[tex]E=t*\sigma_p=t\sqrt{\dfrac{p(1-p)}{n}}=1.984\sqrt{\dfrac{0.653*0.347}{100}}\\\\\\E=1.984*\sqrt{0.00226}=1.984*0.0476=0.094[/tex]

Then, the upper and lower bounds of the confidence interval are:

[tex]LL=p-E=0.653-0.094=0.559\\\\UL=p+E=0.653+0.094=0.747[/tex]

Then, we can say that there is 95% confidence that the population proportion of people from Vermont who exercised for at least 30 minutes a day 3 days a week is between 55.9% and 74.7%.

Final answer:

The estimated population proportion of Vermont residents who exercised for at least 30 minutes a day 3 days a week is 65.3%, which is based on the sample proportion from the Gallup survey.

Explanation:

The student is asking about the population proportion for people from Vermont who exercised for at least 30 minutes a day 3 days a week based on the Gallup survey results. The survey indicated that 65.3% of the Vermont respondents exercised at the mentioned rate.

To find the value of the population proportion (population proportion), we typically use the sample proportion as an estimate. From the survey, we have that the sample proportion (p-hat) for Vermont is 65.3%, which we express as a decimal, 0.653. Assuming the sample is representative, we would estimate the population proportion to also be 0.653 or 65.3%.

It's important to note that this is an estimate based on the sample and that to infer more confidently about the entire population of Vermont, a larger sample size or additional statistical methods such as confidence intervals or hypothesis testing may be applied. Nevertheless, with the information provided, the best estimate for the population proportion of Vermont residents who exercised according to the guidelines is the sample proportion of 65.3%.

Base area of the triangular pyramid is 96 square units.

Lateral surface area of the triangular pyramid is 221.6 square units.

Surface area of the triangular pyramid is 317.6 square units.

Step-by-step explanation:

Base area = 8 x 12

= 96 square units

Base area of the triangular pyramid is 96 square units.

Lateral surface area = 2[(1/2) 10x 14] + (1/2) (12 x 13.6)

= 2(70) +81.6

= 140 + 81.6

= 221.6 square units

Lateral surface area = 221.6 square units

Lateral surface area of the triangular pyramid is 221.6 square units.

Surface area= 221.6 + 96

= 317.6 square units

Surface area of the triangular pyramid is 317.6 square units.

Answer:

the right answer is 48,221.6,269.6

Step-by-step explanation:

Answer:

ln 2, ln 4

Step-by-step explanation:

edge 2021

Using natural logarithm properties, we will see that we can write this expression as:

Ln(2).

Here we start with the expression:

Ln(16) - Ln(8).

Here you need to remember the properties for the natural logarithm:

Then, if we apply the second property to the given expression, we can get:

Ln(16) - Ln(8) = Ln(16/8) = Ln(2).

If you want to learn more about natural logarithms, you can read:

https://brainly.com/question/3227936

To find the total area of the construction paper needed for Natalie's project, multiply the length by the width of each rectangle and add them together.

To find the total area of the construction paper needed for Natalie's project, we need to find the area of each rectangle and then add them together.

Rectangle 1:

Length = 6 inches and width = 13 1/2 inches.

To find the area, multiply the length by the width: 6 inches x 13 1/2 inches = 81 square inches.

Rectangle 2:

Length = 10 1/3 inches and width = 10 1/2 inches.

To find the area, multiply the length by the width: 10 1/3 inches x 10 1/2 inches = 108 1/3 square inches.

Total area:

Add the areas of both rectangles: 81 square inches + 108 1/3 square inches = 189 1/3 square inches.

Therefore, Natalie needs a total of 189 1/3 square inches of construction paper for her project.

Natalie needs a total of 149 square inches of construction paper for her project.

To find the total square inches of construction paper needed for Natalie's project, we calculate the area of each rectangle and then add them together.

1. Area of the first rectangle:

[tex]\( \text{Area}_1 = \text{length} \times \text{width} = 6 \times 13\frac{1}{2} \) square inches.[/tex]

2. Area of the second rectangle:

[tex]\( \text{Area}_2 = \text{length} \times \text{width} = 10\frac{1}{3} \times 10\frac{1}{2} \) square inches.[/tex]

3. Calculate the total area:

  Total area = Area of first rectangle + Area of second rectangle.

Let's compute:

1. [tex]\( \text{Area}_1 = 6 \times 13\frac{1}{2} = 6 \times \frac{27}{2} = \frac{81}{2} = 40.5 \) square inches.[/tex]

2. [tex]\( \text{Area}_2 = 10\frac{1}{3} \times 10\frac{1}{2} = \frac{31}{3} \times \frac{21}{2} = \frac{651}{6} = 108.5 \) square inches.[/tex]

3. Total area = 40.5 + 108.5 = 149 square inches.

So, Natalie needs a total of 149 square inches of construction paper for her project.

Final answer:

Austin receives roughly 2.33 pounds of rice for every dollar spent. At Cheng's Bike Rentals, a customer gets 0.25 hours (or 15 minutes) of bike use for every dollar spent.

Explanation:

To solve the questions about how many pounds of rice Austin gets per dollar and how many hours of bike use a customer gets per dollar at Cheng's Bike Rentals, we need to perform a simple division.

Calculate Rice per Dollar:

Austin bought 7 pounds of rice for $3. To find out how many pounds of rice he gets per dollar, you divide the total pounds of rice by the total cost in dollars:

7 pounds ÷ 3 dollars = 2.33 pounds of rice per dollar.

Calculate Bike Rental Time per Dollar:

At Cheng's Bike Rentals, it costs $36 to rent a bike for 9 hours. To find how many hours of bike use a customer gets per dollar, divide the total hours by the total cost in dollars:

9 hours ÷ 36 dollars = 0.25 hours of bike use per dollar, or 15 minutes per dollar.

Final answer:

Explanation of pounds of rice and hours of bike use per dollar

Explanation:

The ratio of pounds of rice to dollars:

7 pounds of rice for $3

7/3 pounds per dollar

The ratio of hours of bike use to dollars:

36 to rent a bike for 9 hours

9/36 hours per dollar

Answer:

44

Step-by-step explanation:

Answer:

  D) 7.9 ft

Step-by-step explanation:

To answer this, you only need to reject the nonsense answers.

The arc length will be more than 5 ft and less than the length of 2 sides of a 5 ft square (10 ft). Only one answer choice falls in that range.

  7.9 ft

__

If you like, you can figure 1/4 of the circumference of a circle with radius 5 ft:

  C/4 = (1/4)(2π)(5 ft) = 2.5π ft ≈ 7.854 ft ≈ 7.9 ft

Answer:

D 7.9ft

Step-by-step explanation:

Answer:

Step-by-step explanation:

This is a binomial distribution because the probabilities are either that of success or failure.

If probability of success, p = 3/8 = 0.375, then probability of failure, q = 1 - p = 1 - 0.375 = 0.625

The formula is expressed as

P(x = r) = nCr × p^r × q^(n - r)

Where

x represent the number of successes.

p represents the probability of success.

q = represents the probability of failure.

n represents the number of trials or sample.

n = 8

13) P(x = 3) = 8C3 × 0.375^3 × 0.625^(8 - 3) = 0.28

14) P(x = 6) = 8C6 × 0.375^6 × 0.625^(8 - 6) = 0.03

15) P(x = 1) = 8C1 × 0.375^1 × 0.625^(8 - 1) = 0.11

16) P(x = 5) = 8C5 × 0.375^5 × 0.625^(8 - 5) = 0.1

17) P(x ≥ 1) = 1 - P(x < 1)

P(x < 1) = P(x = 0)

P(x = 0) = 8C0 × 0.375^0 × 0.625^(8 - 0) = 0.023

P(x ≥ 1) = 1 - 0.023 = 0.977

18) P(x ≥2) = 1 - P(x < 2)

P(x < 2) = P(x = 0) + P(x = 1)

P(x = 0) = 8C0 × 0.375^0 × 0.625^(8 - 0) = 0.023

P(x = 1) = 8C1 × 0.375^1 × 0.625^(8 - 1) = 0.11

P(x ≥ 2) = 1 - (0.023 + 0.11) = 0.867

19) P(x ≥ 6) = P(x = 6) + P(x = 7) + P(x = 8)

P(x = 6) = 8C6 × 0.375^6 × 0.625^(8 - 6) = 0.03

P(x = 7) = 8C7 × 0.375^7 × 0.625^(8 - 7) = 0.005

P(x = 8) = 8C8 × 0.375^8 × 0.625^(8 - 8) = 0.0004

P(x ≥ 6) = 0.03 + 0.005 + 0.0004 = 0.0354

20) P(x ≥ 7) = P(x = 7) + P(x = 8)

P(x ≥ 7) = 0.005 + 0.0004 = 0.0054

21) P(x ≤ 6) = 1 - P(x = 8)

P(x ≤ 6) = 1 - 0.0004 = 0.9996

22) P(x ≤ 6) = 1 - [P(x = 7) + P(x = 8)]

P(x ≤ 6) = 1 - (0.005 + 0.0004) = 0.9946

The probabilities are listed below:

If each trial represents an independent event, then the probability of success of a given number of consecutive trials ([tex]p_{T}[/tex]) in defined by the following formula:

[tex]p_{T} = p^{n}[/tex] (1)

Where:

If we know that [tex]p = \frac{3}{8}[/tex], then the probabilities associated to a given number of trials:

1) 3 successes

[tex]p_{3} = \left(\frac{3}{8} \right)^{3}[/tex]

[tex]p_{3} = \frac{27}{512}[/tex]

The probability of success of exactly 3 successes is 5.27 %.

2) 6 successes

[tex]p_{6} = \left(\frac{3}{8} \right)^{6}[/tex]

[tex]p_{6} = \frac{729}{262144}[/tex]

The probability of success of exactly 6 successes is 0.28 %.

3) 1 success

[tex]p_{1} = \frac{3}{8}[/tex]

The probablity of success of exactly 1 success is 37.5 %.

4) 5 successes

[tex]p_{5} = \left(\frac{3}{8} \right)^{5}[/tex]

[tex]p_{5} = \frac{243}{32768}[/tex]

The probablity of success of exactly 5 successes is 0.74 %.

5) At least 1 success

The probability of success of at least 1 success is at most 37.5 %.

6) At least 2 successes

The probability of success of at least 2 successes is at most 14.1 %.

7) At least 6 successes

The probablity of success of at least 6 successes is at most 0.28 %.

8) At least 7 successes

The probability of success of at least 7 successes is at most 0.10 %.

9) At most 7 successes

The probability of success of at most 7 successes is at least 0.10 %.

10) At most 6 successes

The probability of success of at most 6 successes is at least 0.28 %.

We kindly invite to check this question on probability: https://brainly.com/question/9793303

Answer:

In converting a mixed number to an improper fraction, you would have to multiply the denominator to the whole number, once you do that you have to add the product to the numerator. The denominator would still stay the same.

A. 1 7/16 = 23/16

B. 11 5/9 = 104/9

C. 30 5/7 = 215/7

D. 10 10/13 = 140/13

E. 24 3/5 = 123/5

F. 129 1/2 = 259/2

~hope this helps~

To convert mixed numbers to improper fractions, multiply the whole number part by the denominator of the fraction, add the numerator, and keep the denominator the same. Examples include converting 1 7/16 to 23/16 and 11 5/9 to 104/9.

To change each mixed number into an equal improper fraction, you should follow a consistent method. This involves multiplying the whole number by the denominator of the fraction part and then adding the numerator of the fraction part. The resulting sum becomes the numerator of the improper fraction, with the denominator remaining the same as in the original fraction.

a. 1 7⁄16: Multiply 1 by 16 (the denominator) = 16, then add 7 (the numerator) = 23. Thus, 1 7⁄16 equals 23/16.

b. 11 5⁄9: Multiply 11 by 9 = 99, then add 5 = 104. So, 11 5⁄9 equals 104/9.

c. 30 5⁄7: Multiply 30 by 7 = 210, then add 5 = 215. Therefore, 30 5⁄7 equals 215/7.

d. 10 10⁄13: Multiply 10 by 13 = 130, add 10 = 140. Hence, 10 10⁄13 is 140/13.

e. 24 3⁄5: Multiply 24 by 5 = 120, add 3 = 123. Thus, 24 3⁄5 equals 123/5.

f. 129 1⁄2: Multiply 129 by 2 = 258, add 1 = 259. Therefore, 129 1⁄2 is 259/2.

Answer:

(A)

[tex]P(X \geq 0.8) = \int\limits_{0.8}^{\infty} f(x) \, dx = \int\limits_{0.8}^{1} 1.25(1-x^4) \, dx = 0.08192[/tex]

(B)

Then the cumulative function would be

[tex]CF(x) = 1.25x - 0.25x^5[/tex]       if   0<x<1

0 otherwise.

Step-by-step explanation:

(A)

We are looking for the probability that the random variable X is greater than 0.8.

[tex]P(X \geq 0.8) = \int\limits_{0.8}^{\infty} f(x) \, dx = \int\limits_{0.8}^{1} 1.25(1-x^4) \, dx = 0.08192[/tex]

(B)

For any  [tex]x[/tex] you are looking for the probability [tex]P(X \geq x)[/tex]  which is

[tex]P(X \geq x) = \int\limits_{-\infty}^{x} 1.25(1-t^4) dt = \int\limits_{0}^{x} 1.25(1-t^4) dt = 1.25x - 0.25x^2[/tex]

Then the cumulative function would be

[tex]CF(x) = 1.25x - 0.25x^5[/tex]       if   0<x<1

0 otherwise.

This response provides step-by-step instructions for calculating probability density functions, cumulative distribution functions, the mean, and the variance using calculus. The solution involves probability theory, calculus, and graphing techniques.

A. To find the proportion of components that are scraped, we need to integrate the probability density function from 0.8 to 1. This can be done using calculus and you should get an answer around 0.41 if done correctly.

B. The cumulative distribution function is the integral of the probability density function. Integrating f(x) from 0 to x will give you a polynomial expression that represents F(x). You can plot this using any graphing software.

C. To find the probability that the clearance is less than 0.5 mm, evaluate the cumulative distribution function at x = 0.5. This will give you a decimal number which represents the probability.

D. The mean clearance is found by taking the expected value of the random variable, which is the integral of x * f(x) from 0 to 1. The variance is found by subtracting the square of the mean from the expected value of the square of the random variable, which is the integral of x^2 * f(x) from 0 to 1.

https://brainly.com/question/35625239

#SPJ3

The frequency has the most flights from the airlines is C. Yellow jet, going east.

The frequency table is a table that's used to illustrate the data that's given.

In this case, the frequency has the most flights from the airlines will be Yellow jet, going east. This is because most people are going in that direction.

Learn more about frequency on:

https://brainly.com/question/254161

The joint frequency with the most flights is yellow jets going east.

Option C is the correct answer.

Joint frequency refers to the number of observations that fall in each category when we have two categorical variables.

We have,

To determine which joint frequency has the most flights, we need to look for the highest value in the table.

From the table,

We can see that the highest value is 35, which represents the number of yellow jets going east.

Therefore,

The joint frequency with the most flights is yellow jets going east.

Learn more about Joint frequency here:

https://brainly.com/question/31189964

#SPJ5

Answer:

a tangent is never a secant

Step-by-step explanation:

the secant is in the circle

please like and Mark as brainliest

The correct statement is A: 'A tangent is never a secant.' because it accurately describes that a tangent only touches the circle at one point and does not cross the circle's interior unlike a secant.

The question you've asked pertains to the geometric definitions of a tangent, secant, chord, and diameter in relation to a circle. Reviewing the options provided:

Given these explanations, the best answer from the choices provided is in fact option A.

https://brainly.com/question/29754801

#SPJ2

Your question is not complete as you have not provided some details.

Please let me assume this to complete your question;

P(t) = M(t) ÷ X(t)

ANSWER:

P(t) is the ratio of the number of melanophores to the number of xanthophores per unit time.

Therefore P(t) = 1.55

Step-by-step explanation:

KEY NOTE:

I) 10% of melanophore converts to Xanthophore per unit time.

II) 40% of Xanthophore converts to melanophore per unit time.

III) 10 melanophore and 20 Xanthophore are born per unit time

IV) 10% of Xanthophore die per unit time.

STEP 1: Conversion rate to number of birth per unit time.

For M(t) 10% of 10 = 1

For X(t) 40% of 20 = 8

Therefore;

M(t) = 10 + 8 - 1 = 17

X(t) = 20 + 1 - 8 = 13

STEP 2:

10% of Xanthophore die per unit time.

10% of 20 = 2

Therefore X(t) is;

13 - 2 = 11

The total X(t) = 11

The total M(t) = 17

P(t) = M(t)/X(t) = 17÷ 11 = 1.55

Answer:

[tex]t=\frac{2.62-2.5}{\frac{1.02}{\sqrt{15}}}=0.456[/tex]    

[tex]df=n-1=15-1=14[/tex]  

[tex]p_v =P(t_{(14)}>0.456)=0.328[/tex]  

If we compare the p value and the significance level assumed [tex]\alpha=0.05[/tex] we see that [tex]p_v>\alpha[/tex] so we can conclude that we have enough evidence to fail reject the null hypothesis, so we can't conclude that the true mean is higher than 2.5 at 5% of significance

Step-by-step explanation:

Data given and notation  

[tex]\bar X=2.62[/tex] represent the sample mean

[tex]s=1.02[/tex] represent the sample deviation

[tex]n=15[/tex] sample size  

[tex]\mu_o =2.5[/tex] represent the value that we want to test

[tex]\alpha[/tex] represent the significance level for the hypothesis test.  

t would represent the statistic (variable of interest)  

[tex]p_v[/tex] represent the p value for the test (variable of interest)  

State the null and alternative hypotheses.  

We need to conduct a hypothesis in order to check if the true mean is higher than 2.5, the system of hypothesis would be:  

Null hypothesis:[tex]\mu \leq 2.5[/tex]  

Alternative hypothesis:[tex]\mu > 2.5[/tex]  

If we analyze the size for the sample is  <30 and we don't know the population deviation so is better apply a t test to compare the actual mean to the reference value, and the statistic is given by:  

[tex]t=\frac{\bar X-\mu_o}{\frac{s}{\sqrt{n}}}[/tex]  (1)  

t-test: "Is used to compare group means. Is one of the most common tests and is used to determine if the mean is (higher, less or not equal) to an specified value".  

Calculate the statistic

We can replace in formula (1) the info given like this:  

[tex]t=\frac{2.62-2.5}{\frac{1.02}{\sqrt{15}}}=0.456[/tex]    

P-value

The first step is calculate the degrees of freedom, on this case:  

[tex]df=n-1=15-1=14[/tex]  

Since is a right tailed test the p value would be:  

[tex]p_v =P(t_{(14)}>0.456)=0.328[/tex]  

Conclusion  

If we compare the p value and the significance level assumed [tex]\alpha=0.05[/tex] we see that [tex]p_v>\alpha[/tex] so we can conclude that we have enough evidence to fail reject the null hypothesis, so we can't conclude that the true mean is higher than 2.5 at 5% of significance

Answer:

740°

Step-by-step explanation:

2 *360° + 20° = 720° + 20° = 740°

Answer:

The total cost is $100

Step-by-step explanation:

To find the total cost, we take the average cost times the number of items

12.50*8 =100

The total cost is $100

Answer:

The answer is 1.5625

Step-by-step explanation:

use division to found this answer

Answer:

a) 93 customers

b) 27 customers

Step-by-step explanation:

Total number of customers (n) = 214

Checking (C) = 189

Regular Savings (R) = 73

Market Savings (M) = 114

Checking and Regular (C&R) = 69

a) The total number of customers is given by:

[tex]n = C+R+M-C\cap R-C\cap M\\214=189+73+114-69-C\cap M\\C\cap M = 93[/tex]

93 customers have both checking and money market savings accounts

b) The number of customers with savings accounts is given by:

[tex]C = C_{only} +C\cap R+C\cap M\\189=C_{only} +69+93\\C_{only} = 27[/tex]

27 customers have a checking account but no savings account.

Answer:

BFD

Step-by-step explanation:

The measure of BFD refers to the angle measurement in a geometric figure formed by points B, F, and D. It's impossible to provide a definitive answer without further context or a diagram. The measure of an angle depends on point positions in a geometrical shape and information provided.

Inquiring about the measure of BFD likely refers to the measure of an angle in a geometric shape with points labeled as B, F, and D. However, without additional information or context such as a diagram displaying details of the geometrical figure involved, it is impossible to definitively provide the exact measure of angle BFD. It's crucial to understand that the measure of an angle depends upon the positions of the points and any information given in an accompanying diagram or problem. For a closer grasp of the concept, remember that in a triangle, for instance, the sum of all angles is always 180 degrees. Thus, if two angles are given, you can determine the measure of the third angle.

https://brainly.com/question/31186705

#SPJ12