Arrange the ions N3-, O2-, Mg2 , Na , and F- in order of increasing ionic radius, starting with the smallest first. Arrange the ions N3-, O2-, Mg2 , Na , and F- in order of increasing ionic radius, starting with the smallest first. N3-, O2-, Mg2 , F-, Na Mg2 , Na , F-, O2-, N3- N3-, Mg2 , O2-, Na , F- N3-, O2-, F-, Na , Mg2

Answer:

(4) increasing the temperature  

Explanation:

PCl₅(g) + energy ⇌ PCl₃(g) + Cl₂(g)

According to Le Châtelier's Principle, when we apply a stress to a system at equilibrium, the system will respond in a way that tends to relieve the stress.

If you increase the temperature, the position of equilibrium will move to the right to get rid of the added heat.

(1) is wrong. Adding a catalyst does not change the position of equilibrium.

(2) is wrong. If you add more PCl₃, the position of equilibrium will move to the left to get rid of the added PCl₃.

(3) is wrong. The left-hand side has fewer moles of gas. If you increase the pressure, the position of equilibrium will move to the left to relieve the pressure.

Answer: Increasing the temperature

Explanation: If you increase the temperature, the position of equilibrium will shift to the right so it can eliminate the heat.

Answer:

i have an answer but i can only show you because my teacher helped my on it and wrote it down for me to remember! hope this helps!!!

Explanation:

A 1.00 g sample ofn-hexane (C6H14) under-goes complete combustion with excess O2ina bomb calorimeter. The temperature of the1502 g of water surrounding the bomb risesfrom 22.64◦C to 29.30◦C. The heat capacityof the hardware component of the calorimeter(everything that is not water) is 4042 J/◦C.What is ΔUfor the combustion ofn-C6H14?One mole ofn-C6H14is 86.1 g.The specificheat of water is 4.184 J/g·◦C.1.-9.96×103kJ/mol2.-7.40×104kJ/mol3.-1.15×104kJ/mol4.-4.52×103kJ/mol5.-5.92×103kJ/molcorrectExplanation:mC6H8= 1.00 gmwater= 1502 gSH = 4.184 J/g·◦CHC = 4042 J/◦CΔT= 29.30◦C-22.64◦C = 6.66◦CThe increase in the water temperature is29.30◦C-22.64◦C = 6.66◦C. The amount ofheat responsible for this increase in tempera-ture for 1502 g of water isq= (6.66◦C)parenleftbigg4.184Jg·◦Cparenrightbigg(1502 g)= 41854 J = 41.85 kJThe amount of heat responsible for the warm-ing of the calorimeter isq= (6.66◦C)(4042 J/◦C)= 26920 J = 26.92 kJ

Answer:

Molarity= 1.7M

Explanation:

n= m/M = 25/58.5= 0.427mol

Applying

n=CV

0.427= C×0.25

C= 1.7M

Answer:

a) ΔGrxn = 6.7 kJ/mol

b) K = 0.066

c) PO2 = 0.16 atm

Explanation:

a) The reaction is:

M₂O₃ = 2M + 3/2O₂

The expression for Gibbs energy is:

ΔGrxn = ∑Gproducts - ∑Greactants

Where

M₂O₃ = -6.7 kJ/mol

M = 0

O₂ = 0

[tex]deltaG_{rxn} =((2*0)+(3/2*0))-(1*(-6.7))=6.7kJ/mol[/tex]

b) To calculate the constant we have the following expression:

[tex]lnK=-\frac{deltaG_{rxn} }{RT}[/tex]

Where

ΔGrxn = 6.7 kJ/mol = 6700 J/mol

T = 298 K

R = 8.314 J/mol K

[tex]lnK=-\frac{6700}{8.314*298} =-2.704\\K=0.066[/tex]

c) The equilibrium pressure of O₂ over M is:

[tex]K=P_{O2} ^{3/2} \\P_{O2}=K^{2/3} =0.066^{2/3} =0.16atm[/tex]

Answer:

The mole fraction of [tex]KCl[/tex] is [tex]N_{KCl}=0.099[/tex]

Explanation:

Generally number of mole is mathematically represented as

                   [tex]n = \frac{mass}{Molar mass }[/tex]

 The number of mole of  [tex]KCl[/tex] is

               [tex]n_{KCl} = \frac{mass \ of \ KCl}{Molar\ mass \ of \ KCl }[/tex]

                   [tex]n_{KCl} = \frac{125}{74.6}[/tex]

                            [tex]=1.676 \ moles[/tex]

 The number of mole of  [tex]H_2O[/tex] is

         [tex]n_{H_2O} = \frac{mass \ of \ H_2O}{Molar\ mass \ of \ H_2O }[/tex]

         [tex]n_{H_2O} = \frac{275}{18}[/tex]

                   [tex]= 15.28 \ moles[/tex]

Mole fraction of     [tex]N_{KCl}= \frac{n_{KCl}}{n_{KCl} + n_{H_2O}}[/tex]

                                        [tex]= \frac{1.676}{15.28 +1.676}[/tex]

                                        [tex]N_{KCl}=0.099[/tex]

Answer:

The mole fraction of KCl is 0.13

Explanation:

no of moles of KCl (n KCl)    = W/G.F.Wt

                                                = 135/74.6  

                                                = 1.81moles

no of moles of H2O (nH2O) = W/G.F.Wt

                                              = 225/18   = 12.5 moles

mole fraction of KCl ( XKCl)   = nKCl/nKCl + nH2O

                                                = 1.81/(1.81+12.5)

                                                 = 1.81/14.31  

      The mole fraction of KCl is   = 0.13

Answer:

.1m HCl  0.001HCl  .00001m HCl  Distilled water  .00001NaOH   .001NaOH   .01NaOH

Explanation:

Thanks to the person who posted the answers, I just wrote it out so its easier to see. :D

In the given compounds, the most acidic compound is 0.1m HCl and most basic compound is 0.01NaOH.

Acids are those compounds whose has a pH value in the range from 0 to 7 and bases are those compounds which has a pH range from 7 to 14.

pH of any solution will be calculated as:

pH = -log[H⁺], where

[H⁺] = concentration of H⁺ ion and this concentration is present in the form of molarity (molar concentration).

So, pH value is directly proportional to the concentration value of H⁺ ion as concentration of H⁺ ion decreases so acidity also decreases and sequence of given compounds from most acidic to most basic is represented as:

0.1m HCl > 0.001HCl > 0.00001m HCl > Distilled water > 0.00001NaOH > 0.001NaOH > 0.01NaOH.

Hence 0.1m HCl is most acidic and 0.01 NaOH is most basic.

To know more about acidity & basicity, visit the below link:
https://brainly.com/question/940314

Answer:

A. 11.26

B. 12.37

Explanation:

A. Step 1:

Dissociation of Mg(OH)2. This is illustrated below below:

Mg(OH)2 <==> Mg2+ + 2OH-

A. Step 2:

Determination of the concentration of the OH-

From the above equation,

1 mole of Mg(OH)2 produce 2 moles of OH-

Therefore, 9.01x10^-4 M Mg(OH)2 will produce = 9.01x10^-4 x 2 = 1.802x10^-3 M of OH-

A. Step 3:

Determination of the pOH. This is illustrated below:

pOH = - Log [OH-]

[OH-] = 1.802x10^-3 M

pOH = - Log [OH-]

pOH = - Log 1.802x10^-3

pOH = 2.74

A. Step 4:

Determination of the pH.

pH + pOH = 14

pOH = 2.74

pH + 2.74 = 14

Collect like terms

pH = 14 - 2.74

pH = 11.26

B. Step 1:

Dissociation of NH4OH. This is illustrated below below:

NH4OH <==> NH4+ + OH-

B. Step 2:

Determination of the concentration of the OH-

From the above equation,

1 mole of NH4OH produce 1 moles of OH-

Therefore, 2.33x10^-2M of NH4OH will also produce 2.33x10^-2M of OH-

B. Step 3:

Determination of the pOH. This is illustrated below:

pOH = - Log [OH-]

[OH-] = 2.33x10^-2M

pOH = - Log [OH-]

pOH = - Log 2.33x10^-2M

pOH = 1.63

B. Step 4:

Determination of the pH.

pH + pOH = 14

pOH = 1.63

pH + 1.63 = 14

Collect like terms

pH = 14 - 1.63

pH = 12.37

Answer:

5.0 %

Explanation:

Given data

Step 1: Calculate the volume of solution

If we assume that the volumes are additive, the volume of the solution is equal to the sum of the volume of the solute and the solvent.

V = 50 mL + 950 mL = 1000 mL

Step 2: Calculate the percent by volume

We will use the following expression.

[tex]\% v/v = \frac{volume\ of\ solute}{volume\ of\ solution} \times 100 \% = \frac{50mL}{1000mL} \times 100 \% = 5.0\%[/tex]

Answer: The mass of [tex]AlCl_3[/tex] theoretically be made can be, 37.4 grams.

Explanation : Given,

Mass of [tex]Al[/tex] = 20.0 g

Mass of [tex]Cl_2[/tex] = 30.0 g

Molar mass of [tex]Al[/tex] = 27 g/mol

Molar mass of [tex]Cl_2[/tex] = 71 g/mol

First we have to calculate the moles of [tex]Al[/tex] and [tex]Cl_2[/tex].

[tex]\text{Moles of }Al=\frac{\text{Given mass }Al}{\text{Molar mass }Al}=\frac{20.0g}{27g/mol}=0.741mol[/tex]

and,

[tex]\text{Moles of }Cl_2=\frac{\text{Given mass }Cl_2}{\text{Molar mass }Cl_2}=\frac{30.0g}{71g/mol}=0.422mol[/tex]

Now we have to calculate the limiting and excess reagent.

The balanced chemical equation is:

[tex]2Al+3Cl_2\rightarrow 2AlCl_3[/tex]

From the balanced reaction we conclude that

As, 3 moles of [tex]Cl_2[/tex] react with 2 moles of [tex]Al[/tex]

So, 0.422 moles of [tex]Cl_2[/tex] react with [tex]\frac{2}{3}\times 0.422=0.281[/tex] moles of [tex]Al[/tex]

From this we conclude that, [tex]Al[/tex] is an excess reagent because the given moles are greater than the required moles and [tex]Cl_2[/tex] is a limiting reagent and it limits the formation of product.

Now we have to calculate the moles of [tex]AlCl_3[/tex]

From the reaction, we conclude that

As, 3 moles of [tex]Cl_2[/tex] react to give 2 moles of [tex]AlCl_3[/tex]

So, 0.422 moles of [tex]Cl_2[/tex] react to give [tex]\frac{2}{3}\times 0.422=0.281[/tex] mole of [tex]AlCl_3[/tex]

Now we have to calculate the mass of [tex]AlCl_3[/tex]

[tex]\text{ Mass of }AlCl_3=\text{ Moles of }AlCl_3\times \text{ Molar mass of }AlCl_3[/tex]

Molar mass of [tex]AlCl_3[/tex] = 133 g/mole

[tex]\text{ Mass of }AlCl_3=(0.281moles)\times (133g/mole)=37.4g[/tex]

Therefore, the mass of [tex]AlCl_3[/tex] theoretically be made can be, 37.4 grams.

Complete Question

The complete question is shown on the first and second uploaded image

Answer:

A

The percentage of water of hydration is   [tex]P_h= 11.01[/tex]%

Mass of [tex]Fe^{3+}[/tex] in 100mg is 10.60mg

Moles of  [tex]Fe^{3+}[/tex] in 100mg is [tex]n_i= 0.19[/tex]

mol / mol Fe (3 sig figs) is [tex]= 1.00[/tex]

mol / mol Fe (whole number) is = 1

B

Mass of [tex]K^{+}[/tex] in 100mg is 27.70mg

Moles of  [tex]K^{+}[/tex] in 100mg is [tex]n_i= 0.581 moles[/tex]

mol  of K / mol of Fe (3 sig figs) is [tex]= 3.05[/tex]

mol  of K / mol of Fe (whole number) is [tex]=3[/tex]

C

Mass of [tex]C_2O_4^{-2}[/tex] in 100mg is 55.69 mg

Moles of [tex]C_2O_4^{-2}[/tex]  in 100mg is [tex]n_i= 0.633 moles[/tex]

mol  of  [tex]C_2O_4^{-2}[/tex] / mol of Fe (3 sig figs) is [tex]= 3.33[/tex]

mol  of [tex]C_2O_4^{-2}[/tex] / mol of Fe (whole number) is [tex]=3[/tex]

D

Mass of water in 100mg is 11.01 mg

Moles of water  in 100mg is [tex]n_i= 0.611 moles[/tex]

mol  of  water / mol of Fe (3 sig figs) is [tex]= 3.21[/tex]

mol  of water / mol of Fe (whole number) is [tex]=3[/tex]

Explanation:

The percentage of water of hydration is mathematically represented as

        [tex]P_h = 100 - (Pi + P_p + P_o)[/tex]

Now substituting 10.60% for [tex]P_i[/tex] (percentage of iron ) , 22.70% for [tex]P_p[/tex](Percentage of potassium) , 55.69% for [tex]P_o[/tex] (percentage of Oxlate)

        [tex]P_h =100 - (10.60 + 22.70+55.69)[/tex]

             [tex]P_h= 11.01[/tex]%

For IRON

Since the percentage of [tex]Fe^{3+}[/tex] is 10.60% then in a 100 mg of the sample the amount of [tex]Fe^{3+}[/tex] would be 10.60 mg

  Now the no of moles is mathematically denoted as

            [tex]n = \frac{mass}{molar \ mass }[/tex]

The molar mass of [tex]Fe[/tex] is  55.485 g/mol

     So the number of moles of [tex]Fe^{3+}[/tex] in 100mg of he sample is

                  [tex]n_i = \frac{10.60}{55.485}[/tex]

                       [tex]n_i= 0.19[/tex]

mol / mol Fe (3 sig figs) is [tex]= \frac{0.19}{0.19} = 1.00[/tex]

FOR POTASSIUM

Since the percentage of [tex]K^{+}[/tex] is 22.70% then in a 100mg of the sample the amount of [tex]K^{+}[/tex] would be 22.70mg

The molar mass of [tex]K[/tex] is  39.1 g/mol

   So the number of moles of [tex]K^{+}[/tex] in 100mg of he sample is

                  [tex]n_i = \frac{22.70}{39.1}[/tex]

                      [tex]=0.581 moles[/tex]

mol  of K / mol of Fe (3 sig figs) is [tex]= \frac{0.581}{0.19} = 3.05[/tex]

FOR OXILATE [tex]C_2O_4^{-2}[/tex]

Since the percentage of [tex]C_2O_4^{-2}[/tex]  is 55.69% then in a 100mg of the sample the amount of [tex]C_2O_4^{-2}[/tex] would be 55.69 mg

The molar mass of [tex]C_2O_4^{-2}[/tex] is  88.02 g/mol

  So the number of moles of [tex]C_2O_4^{-2}[/tex]   in 100mg of he sample is

                  [tex]n_i = \frac{55.69}{88.02}[/tex]

                         [tex]=0.633 moles[/tex]

mol  of [tex]C_2O_4^{-2}[/tex] / mol of Fe (3 sig figs) is  [tex]= \frac{0.633}{0.19} = 3.33[/tex]

FOR WATER OF HYDRATION

        Since the percentage of water  is 11.01% then in a 100mg of the sample the amount of water would be 11.0 mg

   The molar mass of water  is  18.0 g/mol

  So the number of moles of water   in 100mg of he sample is

                  [tex]n_i = \frac{11.01}{18.0}[/tex]

                      [tex]=0.611 moles[/tex]

mol  of  water / mol of Fe (3 sig figs) is  [tex]= \frac{0.611}{0.19} = 3.21[/tex]

Answer:

hydrogen ions

Explanation:

Acids are substances that when dissolved in water release hydrogen ions, H+(aq). Bases are substances that react with and neutralise acids, producing water. When dissolved, bases release hydroxide ions, OH-(aq) into solution. Water is the product of an acid and base reacting.

When acids dissolve in water, they produce hydrogen ions (H+). This is known as the process of ionization.

The hydrogen ions are responsible for the acidic properties of the solution.When HCl is added to water, it dissociates into hydrogen ions (H+) and chloride ions (Cl-). The presence of hydrogen ions gives the solution acidic properties.

Similarly, other acids such as sulfuric acid, nitric acid, and acetic acid also produce hydrogen ions when dissolved in water.

It's important to note that not all substances that dissolve in water are acids. Acids have a pH value less than 7, and their properties can vary depending on their strength. Strong acids, like hydrochloric acid, completely dissociate in water, producing a large number of hydrogen ions. Weak acids, like acetic acid, only partially ionize, producing fewer hydrogen ions.

Learn more about acids,here:

https://brainly.com/question/29796621

#SPJ6

Answer:

0.72g of gallium

Explanation:

Equation of the reduction reaction:

Ga^3+(aq) +3e --------> Ga(s)

If it takes 3F coulumbs of electricity to deposit 70g of gallium (relative atomic mass of gallium)

Then (0.710 × 70×60) coulombs of electricity will deposit (0.710 × 70×60) × 70/3F

But F = 96500C or 1Faraday

Therefore:

(0.710 × 70×60) × 70/3×96500

Mass of gallium deposited= 0.72g of gallium

Answer:

[tex]\large \boxed{\text{0.0503 g}}[/tex]

Explanation:

The limiting reactant is the reactant that gives the smaller amount of product.

Assemble all the data in one place, with molar masses above the formulas and masses below them.

M_r:   39.10    80.41                2.016  

            2K  +  2HBr ⟶ 2KBr + H₂

m/g:     5.5      4.04

a) Limiting reactant

(i) Calculate the moles of each reactant  

[tex]\text{Moles of K} = \text{5.5 g} \times \dfrac{\text{1 mol}}{\text{31.10 g}} = \text{0.141 mol K}\\\\\text{Moles of HBr} = \text{4.04 g} \times \dfrac{\text{1 mol}}{\text{80.91 g}} = \text{0.049 93 mol HBr}[/tex]

(ii) Calculate the moles of H₂ we can obtain from each reactant.

From K:  

The molar ratio of H₂:K is 1:2.

[tex]\text{Moles of H}_{2} = \text{0.141 mol K} \times \dfrac{\text{1 mol H}_{2}}{\text{1 mol K}} = \text{0.0703 mol H}_{2}[/tex]

From HBr:  

The molar ratio of H₂:HBr is 3:2.  

[tex]\text{Moles of H}_{2} = \text{0.049.93 mol HBr } \times \dfrac{\text{1 mol H}_{2}}{\text{1 mol HBr}} = \text{0.024 97 mol H}_{2}[/tex]

(iii) Identify the limiting reactant

HBr is the limiting reactant because it gives the smaller amount of NH₃.

b) Excess reactant

The excess reactant is K.

c) Mass of H₂

[tex]\text{Mass of H}_{2} = \text{0.024 97 mol H}_{2} \times \dfrac{\text{2.016 g H}_{2}}{\text{1 mol H}_{2}} = \textbf{0.0503 g H}_{2}\\ \text{The mass of hydrogen is $\large \boxed{\textbf{0.0503 g}}$ }[/tex]

Answer:

13 grams Na₂SO₄ (2 sig.figs.)

Explanation:

1st convert mass values to moles and solve yield using limiting reactant principles and reaction ratio of balance equation.

Determine limiting reactant and

Complete problem by converting yield into grams.

H₂SO₄ + 2NaOH => Na₂SO₄ + 2H₂O

moles H₂SO₄ = 8.83g/98g·mol⁻¹ = 0.0901 mole H₂SO₄

moles NaOH = 9.1g/40g·mol⁻¹ = 0.2275 mole NaOH

Determine Limiting Reactant by dividing each mole value by the respective coefficient in the balanced equation. The smaller value is always the limiting reactant.

H₂SO₄ => (0.0901/1) = 0.0901 <= Limiting Reactant (smaller value)

NaOH =>  (0.2275/2) = 0.1138

NOTE: when working the problem use the calculated moles of reactant NOT the LR test number. In this problem, use 0.0901 mole H₂SO₄. (yeah, it is the same but this does not occur for the LR in many other problems). Anyways...

                    H₂SO₄        +        2NaOH       =>       Na₂SO₄      +      2H₂O

moles      0.0901 mole          0.2275 mol            0.0901 mol      2(0.0901 mol)

mass (g) Na₂SO₄ = 0.0901 mole x 142.04 g/mol = 12.798 grams ≅ 13 grams                                    Na₂SO₄ (2 sig.figs.)

Answer:

13 grams Na₂SO₄ (2 sig.figs.)

Explanation:

Firstly

We convert mass values to moles and solve yield using limiting reactant principles and reaction ratio of balance equation.

To determine limiting reactant and

Complete problem by converting yield into grams. We write the equations for the reaction

H₂SO₄ + 2NaOH => Na₂SO₄ + 2H₂O

To give

moles H₂SO₄ = 8.83g/98g·mol⁻¹ = 0.0901 mole H₂SO₄

Then,

moles NaOH = 9.1g/40g·mol⁻¹ = 0.2275 mole NaOH

Determine Limiting Reactant by dividing each mole value by the respective coefficient in the balanced equation. The smaller value is always the limiting reactant.

H₂SO₄ => (0.0901/1) = 0.0901 <= Limiting Reactant (smaller value)

NaOH =>  (0.2275/2) = 0.1138

N/B: when working the problem use the calculated moles of reactant NOT the LR test number. In this problem, use 0.0901 mole H₂SO₄. (yeah, it is the same but this does not occur for the LR in many other problems). Anyways...

H₂SO₄        +        2NaOH       =>       Na₂SO₄      +      2H₂O

moles      0.0901 mole          0.2275 mol            0.0901 mol      2(0.0901 mol)mass (g)

Na₂SO₄ = 0.0901 mole x 142.04 g/mol = 1

2.798 grams ≅ 13 grams                                    Na₂SO₄ (2 sig.figs.)

Answer:

165.5 g of CO2

Explanation:

We must first put down the balanced reaction equation:

C4H10(g) + 13/2 O2(g) ------> 4CO2(g) + 5H2O(g)

From the reaction equation, one mole of butane occupies 22.4 L hence we can establish the stoichiometry of the reaction thus:

22.4 L of butane created 174 g of CO2

Therefore 21.3 L of butane will create 21.3 × 174/22.4 = 165.5 g of CO2

Answer : The volume of [tex]CO_2[/tex] produced are, 26.7 liters.

Explanation :

First we have to calculate the moles of [tex]C_{10}H_{22}[/tex]

[tex]\text{Moles of }C_{10}H_{22}=\frac{\text{Given mass }C_{10}H_{22}}{\text{Molar mass }C_{10}H_{22}}=\frac{16.9g}{142g/mol}=0.119mol[/tex]

Now we have to calculate the moles of [tex]CO_2[/tex].

The given combustion reaction is:

[tex]2C_{10}H_{22}+31O_2\rightarrow 22H_2O+20CO_2[/tex]

From the balanced chemical reaction we conclude that,

As, 2 moles of [tex]C_{10}H_{22}[/tex] react to give 20 moles of [tex]CO_2[/tex]

So, 0.119 moles of [tex]C_{10}H_{22}[/tex] react to give [tex]\frac{20}{2}\times 0.119=1.19[/tex] moles of [tex]CO_2[/tex]

Now we have to calculate the volume of [tex]CO_2[/tex] produced.

As we know that, 1 mole of gas occupies 22.4 L volume of gas.

As, 1 mole of [tex]CO_2[/tex] gas occupies 22.4 L volume of [tex]CO_2[/tex] gas.

So, 1.19 mole of [tex]CO_2[/tex] gas occupies 1.19 × 22.4 L = 26.7 L volume of [tex]CO_2[/tex] gas.

Therefore, the volume of [tex]CO_2[/tex] produced are, 26.7 liters.

The mass of AgI in the precipitate is approximately 38.65 grams (rounded to two significant figures) with the appropriate units.

To find the mass of AgI in the precipitate, we first need to determine the moles of AgI formed. We'll use the information provided and follow these steps:

1. Write the balanced chemical equation for the precipitation reaction:

[tex]\[ \text{Ag}^+ + \text{I}^- \rightarrow \text{AgI} \][/tex]

[tex]\[ \text{Hg}_2^{2+} + 2\text{I}^- \rightarrow \text{HgI}_2 \][/tex]

2. Determine the limiting reactant:

  - For AgI: [tex]\( \text{Ag}^+ + \text{I}^- \)[/tex] (1 mole of Ag per mole of I)

  - For HgI2: [tex]\( \frac{1}{2}\text{Hg}_2^{2+} + \text{I}^- \)[/tex] (1 mole of Hg per 2 moles of I)

  The limiting reactant is the one that produces the fewer moles of I^-, as it determines the amount of AgI formed.

  [tex]\[ \text{moles of I}^- = 0.100 \, \text{L} \times 1.71 \, \text{mol/L} = 0.171 \, \text{mol} \][/tex]

  The limiting reactant is AgI, as it requires 0.171 moles of I^-, while HgI2 would require 0.342 moles of I^-.

3. Calculate the moles of AgI formed:

  [tex]\[ \text{moles of AgI} = \text{moles of I}^- \times \frac{1 \, \text{mol AgI}}{1 \, \text{mol I}^-} = 0.171 \, \text{mol} \][/tex]

4. Calculate the mass of AgI formed:

  [tex]\[ \text{mass of AgI} = \text{moles of AgI} \times \text{molar mass of AgI} \][/tex]

  The molar mass of AgI is the sum of the atomic masses of Ag (107.87 g/mol) and I (126.904 g/mol).

  [tex]\[ \text{mass of AgI} = 0.171 \, \text{mol} \times (107.87 + 126.904) \, \text{g/mol} \][/tex]

  [tex]\[ \text{mass of AgI} \approx 38.65 \, \text{g} \][/tex]

Therefore, the mass of AgI in the precipitate is approximately 38.65 grams (rounded to two significant figures) with the appropriate units.

Answer:

Zinc is the reducing agent.

Explanation:

Zn is the reducing agent because its oxidation state increases from 0 to 2 and hydrochloric acid, HCl is the oxidizing agent because it loses hydrogen ions, H+ based on the following balanced equation:

Zn (s) + 2HCl (aq)  ----->  ZnCl2 (aq) + H2 (g)

In oxidation, there is the loss of electrons. In reduction, there is a gain of electrons. A nemonic device that might help is LEO (the lion said) GER.

Losses

Electrons

Oxidation

Gains

Electrons

Reduction

Answer:

Zinc

The reducing agent in these reaction is Zinc (Zn)

Explanation:

Zn is the reducing agent because its oxidation state increases from 0 to 2 and hydrochloric acid, HCl is the oxidizing agent because it loses hydrogen ions, H+ based on the following balanced equation:

Zn (s) + 2HCl (aq) -----> ZnCl2 (aq) + H2 (g)

In oxidation, there is the loss of electrons.

In reduction, there is a gain of electrons.

Answer:The Zinc Reacts With The Hydrochloric Acid Producing Zinc Chloride And Hydrogen Gas, And Leaving The Copper Behind. A. If 25.0 G Of Zinc ... Zn+ 2 HCI --> ZnCl2 + H2 (answer .771 G H2) B. If The Reaction Yields . ... If 25.0 g of zinc are in a sample of bronze, determine the theoretical yield of hydrogen gas. Zn+ 2 HCI

Answer:

0.23 mol/L

Explanation:

Step 1:

The balanced equation for the reaction. This is illustrated below:

Pb(NO3)2(aq) + 2NaCl(aq) —> PbCl2(s) + 2NaNO3(aq)

Step 2:

Determination of the number of in 12.79g of PbCl2. This is illustrated below:

Mass of PbCl2 = 12.79g

Molar Mass of PbCl2 = 207 + (2x35.5) = 207 + 71 = 278g/mol

Number of mole of PbCl2 =?

Number of mole = Mass/Molar Mass

Number of mole of PbCl2 = 12.79/278

Number of mole of PbCl2 = 0.046 mole

Step 3:

Determination of the number of mole of Pb(NO3)2 that reacted.

This is illustrated below:

From the balanced equation above,

1 mole of Pb(NO3)2 reacted to produce 1 mole of PbCl2.

Therefore, it will also take 0.046 mole of Pb(NO3)2 to react to produce 0.046 mole of PbCl2.

Step 4:

Determination of the molarity of Pb(NO3)2. This is illustrated:

Mole of Pb(NO3)2 = 0.046 mole

Volume of the solution = 200 mL = 200/1000 = 0.2 L

Molarity =?

Molarity is defined as the mole of solute per unit litre of solution. It is given by:

Molarity = mole of solute /Volume

Molarity of Pb(NO3)2 = 0.046/0.2

Molarity of Pb(NO3)2 = 0.23 mol/L

In chemical reactions, a change in volume affects the position of equilibrium based on stoichiometry. Increasing volume results in a shift towards the side with more gaseous molecules for reactions with Δn not equal to zero, while there is no shift if Δn equals zero. The direction of the shift is to decrease the reaction quotient (Q) in order to re-establish equilibrium with the equilibrium constant (K).

Explanation:

The effect of volume change on the position of equilibrium in chemical reactions is dependent on the stoichiometry and the reaction in question. For a reaction where Δn = -1, increasing the volume would result in a decrease in pressure and a shift towards the side with more moles of gas to re-establish equilibrium, typically the side with more molecules. However, if Δn = 0, an increase in volume has no effect on the equilibrium as there is no change in moles of gaseous substances on either side of the reaction. When Δn = +1, increasing the volume leads the equilibrium to shift towards the products, as this increases the total number of gaseous molecules which tends to lower the pressure.

When volume is increased and the reaction quotient Q becomes greater than the equilibrium constant K (Q > K), the reaction tends to shift towards the reactants to re-establish equilibrium. Conversely, when volume is decreased, and the pressure is increased, the reaction tends to shift towards the side of the reaction with fewer moles of gas.

Answer:

The amount of heat is 84.4894kJ

Explanation:

Given data:

mass of octane=148g

The moles of octane is:

[tex]n_{octane} =148g*\frac{1mol}{114.23g} =1.2956moles[/tex]

The melting point is=-56.82°C

ΔHfus=20.73kJ/mol

The heat of fusion is:

[tex]Q_{fus} =n_{octane} *delta-H_{fus} =1.2956*20.73=26.8578kJ[/tex]

The heat to bring the octane to a temperature of 117.8°C is:

[tex]Q_{2} =mCp(117.8-(56.82))=148*2.23*(117.8+56.82)=57631.5848J=57.6316kJ[/tex]

The total heat in the process is:

Qtotal=Qfus+Q₂=26.8578+57.6316=84.4894kJ

Answer : The molarity of KF solution is, 1 M

Explanation : Given,

Mass of [tex]KF[/tex] = 116 g

Volume of solution = 2 L

Molar mass of [tex]KF[/tex] = 58 g/mole

Molarity : It is defined as the number of moles of solute present in one liter of volume of solution.

Formula used :

[tex]\text{Molarity}=\frac{\text{Mass of }KF}{\text{Molar mass of }KF\times \text{Volume of solution (in L)}}[/tex]

Now put all the given values in this formula, we get:

[tex]\text{Molarity}=\frac{116g}{58g/mole\times 2L}=1mole/L=1M[/tex]

Therefore, the molarity of KF solution is, 1 M

Answer:

Explanation:

find the solution below

The organic compounds carboxylic acid, amine, and alcohol contain different numbers of sigma and pi bonds resulting from the overlapping of atomic orbitals. In these provided examples, the carboxylic acid contains nine sigma and two pi bonds, the amine has twelve sigma and two pi bonds, and the alcohol has nine sigma and 0 pi bonds.

Sigma

and

pi bonds

occur in various types of organic molecules, including carboxylic acids, amines, and alcohols. A sigma (σ) bond is formed by the head-on overlapping of atomic orbitals, whereas a pi (π) bond is formed by the lateral overlap of two p orbitals. In the carboxylic acid H2CCHCH2COOH, there are nine sigma and two pi bonds. As for the amine HCCCH2CHCHCH2NH2, there are twelve sigma and two pi bonds. Lastly, an alcohol molecule, such as CH3OH, consists of 9 sigma bonds and 0 pi bonds. It's essential to note that a double bond contains one sigma and one pi bond, while a triple bond contains one sigma and two pi bonds.

https://brainly.com/question/31238729

#SPJ6

Answer:

Electrons

Explanation:

In an atom there would be three subatomic particles: Neutrons, electrons, protons. The smallest and lightest in terms of mass is electrons. This is because the nucleus is comprised of the protons and the neutrons, these have a greater mass than electrons as electrons has very little mass that can considered to be 0.

The solubility of CuX in a 0.200 M NaCN solution cannot be calculated solely based on the Ksp of CuX, because NaCN forms a complex with Cu2+, significantly affecting its solubility. Additional information on the stability constant of the copper-cyanide complex is needed

To calculate the solubility of CuX in a solution that is 0.200 M in NaCN, we must consider the common ion effect due to the presence of the cyanide ion, CN-. The equation for the solubility product (Ksp) is given by Ksp = [Cu2+][X2−]. Since cyanide ions form a complex with copper ions, the direct precipitation of CuX is suppressed, and we cannot simply take the square root of the Ksp to find its molar solubility.

Instead, we would write the reaction of copper with cyanide: CuX(s) + 4CN−
ightleftharpoons [Cu(CN)4]3− + X2−. This complexation reaction would vastly reduce the concentration of free Cu2+ ions in solution, thereby affecting the solubility of CuX. To find the actual solubility, we would need to know the stability constant (Kf) for the copper-cyanide complex, and then set up an equilibrium calculation that includes both the Ksp of CuX and the Kf of [Cu(CN)4]3−. Since the problem doesn't provide Kf, we would not be able to calculate the solubility without additional information

The presence of NaCN significantly decreases the solubility of CuX due to the common ion effect. Therefore, the solubility of CuX in a solution that is 0.200 M in NaCN remains extremely low, approximately 1.27×10 ⁻¹⁸ M.

To calculate the solubility of CuX in a solution that is 0.200 M in NaCN, we need to consider the common ion effect. When NaCN dissolves, it produces CN⁻ ions, which can interact with Cu²⁺ ions, reducing the solubility of CuX.

Given that the solution is 0.200 M in NaCN, we can assume that the concentration of CN⁻ ions ([CN⁻]) is 0.200 M.

Now, let's denote the solubility of CuX as x M. Since CuX dissociates into Cu²⁺ and X²⁻ ions, the concentration of Cu²⁺ ions ([Cu²⁺]) and X²⁻ ions ([X²⁻]) will both be equal to x M at equilibrium.

The solubility product constant (K sp​ ) expression for CuX is:

K sp​ =[Cu²⁺ ][X²⁻ ]

Given that K sp​ =1.27×10⁻³⁶ , we can substitute the concentrations into the expression:

1.27×10⁻³⁶ =(x)(x)

1.27×10⁻³⁶ =x²

Now, we'll solve this equation for x to find the solubility of CuX. Let's proceed with the calculations.

To solve for x, we take the square root of both sides of the equation:

x= 1.27×10⁻³⁶

x=1.127×10⁻¹⁸

So, the solubility of CuX in a solution that is 0.200 M in NaCN is

1.127×10⁻¹⁸  M.

Answer:

Lemon

HCI

Blood

Saliva

Bleach

NaOH

Explanation:

Blood 7.35-7.45

Bleach 12.6

Saliva 6.2-7.6

Lemon 2-3

HCI 3.01

NaOH 13

Answer:

Higher oxidation state metals form stronger bong with ligands

Explanation:

Ligand strength are based on oxidation number, group and its properties

Statement e is not an accurate description because the ordering of the spectrochemical series depends on multiple factors, including ligand size, pi-donor or pi-acceptor abilities, and the metal's identity and oxidation state, in addition to electronegativity of the donor atom.

The correct answer to the question "Which of the following statements is not an accurate description of a factor that contributes to the ordering of the spectrochemical series for ligands and metals?" is e. The electronegativity of the donor atom is the most important factor for ligands.

The spectrochemical series is an ordering of ligands based on the magnitude of the ligand field splitting parameter (Δoct) they produce in coordination complexes. Contrary to option e, it is not just the electronegativity of the donor atom but also a series of other factors such as the size of the donor atom, the ligand's field strength (pi-donor or pi-acceptor abilities), and the identity of the metal ion and its oxidation state that contribute to the ordering of the spectrochemical series. For example, small neutral ligands with highly localized lone pairs, such as NH₃, produce larger Δoct values which illustrates more than just electronegativity playing a role.

The equilibrium constant, Kc, for the given reaction can be calculated using the solubility product constant, Ksp, and the overall formation constant, Kf. Substituting the given values, we find that Kc is equal to 3.186 × 10⁻⁵.

The equilibrium constant, Kc, for the reaction AgCl (s) + Cl⁻ (aq) ⇌ AgCl⁻₂ (aq) can be calculated using the solubility product constant, Ksp, for AgCl and the overall formation constant, Kf, for AgCl⁻₂.

The equilibrium constant is given by the product of Ksp and Kf:

Kc = Ksp * Kf

Substituting the values given, Ksp = 1.77 × 10⁻¹⁰ and Kf = 1.8 × 10⁵, we can calculate the value of Kc:

Kc = (1.77 × 10⁻¹⁰) * (1.8 × 10⁵) = 3.186 × 10⁻⁵