Answer:
It take the car to catch up with the truck 111.91 s.
Explanation:
To solve this problem we have to use the formula for uniformly accelerated motion (for the car) and the formula for uniform rectilinear movement (for the truck).
We apply the corresponding formula for each vehicle, so we will have two equations. As the question is how much time, time is the unknown variable that we will call t from now on.
Equation for the car is:
[tex]x_{c}=\frac{1}{2}*a*t^{2}[/tex]
Equation for the truck is
[tex]x_{t} =v*t[/tex]
We know that t will be the same for the two vehicle on the instant the car catch up the truck.
On the time t the distance x traveled for both cars are the same, so we can equate the two formulas ans isolate t.
[tex]v*t=\frac{1}{2} *a*t^{2} \\t=(2*v)/a\\t=111,91s[/tex]
Note: all unit of measurement must be the same, for speed, we need to convert 36,3mph to m/s.
36,3mph=162.27m/s we use 162.27m/s in the formulas.
It will take the car approximately 11.17 seconds to catch up with the truck that passes it traveling at a constant speed when the car starts from rest and accelerates at 2.9 m/s².
Explanation:The question asks how long it takes for a car that starts from rest with a constant acceleration to catch up with a truck traveling at a constant speed. The car accelerates from rest at 2.9 m/s², while the truck travels at a constant speed of 36.3 mph, which is approximately 16.2 m/s (1 mph equals approximately 0.44704 m/s).
To solve this problem, we need to consider that the car and truck will have traveled the same distance when the car catches up to the truck. The equations for distance for the car (with acceleration) and the truck (traveling at constant speed) are:
Distancecar = ½ * acceleration * time²Distancetruck = speed * timeWe set the distances equal to each other:
½ * 2.9 m/s² * time² = 16.2 m/s * time
This gives us a quadratic equation:
½ * 2.9 * time² - 16.2 * time = 0
Factoring out the common term 'time', we get:
time(½ * 2.9 * time - 16.2) = 0
Ignoring the solution where time equals zero (since we want to know how long it takes after they have started moving), we get:
½ * 2.9 * time = 16.2
time = (16.2 / (0.5 * 2.9)) seconds
Solving this, time ≈ 11.17 seconds
Therefore, it will take the car approximately 11.17 seconds to catch up with the truck.
Suppose that a submarine inadvertently sinks to the bottom of the ocean at a depth of 1000m. It is proposed to lower a diving bell to the submarine and attempt to enter the conning tower. What must the minimum air pressure be in the diving bell at the level of the submarine to prevent water from entering into the bell when the opening valve at the bottom is cracked open slightly? Give your answer in absolute kilopascal. Assume that seawater has a constant density of 1.024 g/cm3.
Answer:
1.004 × 10⁴ kPa
Explanation:
Given data
Depth (h): 1000 mDensity of seawater (ρ): 1.024 × 10³ kg/m³[tex]\frac{1.024g}{cm^{3}}.\frac{1kg}{10^{3}g} .\frac{10^{6}cm^{3}}{1m^{3} } =1.024 \times 10^{3} kg/m^{3}[/tex]
Gravity (g): 9.806 m/s²In order to prevent water from entering, the air pressure must be equal to the pressure exerted by the seawater at the bottom. We can find that pressure (P) using the following expression.
P = ρ × g × h
P = (1.024 × 10³ kg/m³) × (9.806 m/s²) × 1000 m
P = 1.004 × 10⁷ Pa
P = 1.004 × 10⁷ Pa × (1 kPa/ 10³ Pa)
P = 1.004 × 10⁴ kPa
A solid cylinder of cortical bone has a length of 500mm, diameter of 2cm and a Young’s Modulus of 17.4GPa. Determine the spring constant ‘k’
Answer:
The spring constant is [tex]1.09\times10^{9}\ N/m[/tex]
Explanation:
Given that,
length = 500 mm
Diameter = 2 cm
Young's modulus = 17.4 GPa
We need to calculate the young's modulus
Using formula of young's modulus
[tex]Y=\dfrac{\dfrac{F}{A}}{\dfrac{\Delta l}{l}}[/tex]....(I)
[tex]Y=\dfrac{Fl}{\Delta l A}[/tex]
From hook's law
[tex]F=kx[/tex]
[tex]k=\dfrac{F}{x}[/tex]
[tex]F=k\times\Delta l[/tex]....(II)
Put the value of F in equation
[tex]Y=\dfrac{k\times\Delta l\times l}{\Delta l A}[/tex]
[tex]Y=\dfrac{kl}{A}[/tex]
We need to calculate the spring constant
[tex]k = \dfrac{YA}{l}[/tex]....(II)
We need to calculate the area of cylinder
Using formula of area of cylinder
[tex]A=2\pi\times r\times l[/tex]
Put the value into the formula
[tex]A=2\pi\times 1\times10^{-2}\times500\times10^{-3}[/tex]
[tex]A=0.0314\ m^2[/tex]
Put the value of A in (II)
[tex]k=\dfrac{1.74\times10^{10}\times0.0314}{500\times10^{-3}}[/tex]
[tex]k=1.09\times10^{9}\ N/m[/tex]
Hence, The spring constant is [tex]1.09\times10^{9}\ N/m[/tex]
Computethe maximum height that a projectile can
reach if it is launchedwith speed V o at angle thetarelative to the horizontal. If an
object is thrown directly upwardswith a speed of 330m/s, the
typical speed of sound in the air atroom temperature, how high can
it get?
Answer:
A. [tex]H=\frac{v_{0}^{2}Sin^{2}\theta }{2g}[/tex]
B. 5556.1 m
Explanation:
A.
Launch speed, vo
Angle of projection = θ
The value of vertical component of velocity at maximum height is zero. Let the maximum height is H.
Use third equation of motion in vertical direction
[tex]v_{y}^{2}=u_{y}^{2}+2a_{y}H[/tex]
[tex]0^{2}=\left (v_{0}Sin\theta \right )^{2}-2gH[/tex]
[tex]H=\frac{v_{0}^{2}Sin^{2}\theta }{2g}[/tex]
B.
u = 330 m/s
Let it goes upto height H.
V = 0 at maximum height
Use third equation of motion in vertical direction
[tex]v^{2}=u^{2}+2as[/tex]
[tex]0^{2}=330^{2}-2\times 9.8\times H[/tex]
H = 5556.1 m
An object starts at Xi = -4m with an initial velocity of 4m/s. It experiences an acceleration of -2 m/s^2 for 2 seconds, followed by an acceleration of -6 m/s^2 for 4 seconds. 1. After 2 seconds, what is the objects velocity? 2. After 6 seconds, what is the objects velocity? 3. After 6 seconds, what is the objects total displacement?
Answer:
a) 0 m/s
b) - 24 m/s
c) - 68 m
Explanation:
Given:
Initial distance = - 4 m
Initial velocity, u = 4 m/s
1) acceleration, a = - 2 m/s² for time, t = 2 seconds
thus,
velocity after 2 seconds will be
from Newton's equation of motion
v = u + at
v = 4 + (-2) × 2
v = 0 m/s
2) Velocity after 2 second is the initial velocity for this case
given acceleration = - 6 m/s² for 4 seconds
thus,
final velocity, v = 0 + ( - 6 ) × 4 = - 24 m/s
here the negative sign depicts the velocity in opposite direction to the initial direction of motion
thus, velocity after 6 seconds = - 24 m/s
3) Now,
Total displacement in 6 seconds
= Displacement in 2 seconds + Displacement in 4 seconds
From Newton's equation of motion
[tex]s=ut+\frac{1}{2}at^2[/tex]
where,
s is the distance
u is the initial speed
a is the acceleration
t is the time
thus,
= [tex]0\times2+\frac{1}{2}\times(-2)\times2^2[/tex] + [tex]0\times4+\frac{1}{2}\times-6\times4^2[/tex]
= - 16 - 48
= - 64 m
Hence, the final displacement = - 64 - 4 = - 68 m
A toy car runs off the edge of a table that is 1.807 m high. The car lands 0.3012 m from the base of the table. How long does it take for the car to fall? The acceleration due to gravity is 9.8 m/s^2. Answer in units of s. What is the horizontal velocity of the car? Answer in units of m/s.
Final answer:
The time it takes for the car to fall is 0.606 s and the horizontal velocity of the car is 0.497 m/s.
Explanation:
To find the time it takes for the toy car to fall, we can use the kinematic equation:
h = (1/2)gt^2
Where h is the height, g is the acceleration due to gravity, and t is the time. Rearranging the equation, we can solve for t:
t = sqrt(2h / g)
Plugging in the values, we have:
t = sqrt(2 * 1.807 / 9.8) = 0.606 s
To find the horizontal velocity of the car, we can use the equation:
v = d / t
Where v is the velocity, d is the horizontal distance, and t is the time. Plugging in the values, we have:
v = 0.3012 / 0.606 = 0.497 m/s
A walker covers a disatance of 4.0 km in a time of 53 minutes. (a) What is the average speed of the walker for this distance in km/hr?
Answer:
Average speed, v = 48.01 km/h
Explanation:
Given that,
Distance covered by the walker, d = 4 km
Tim taken to cover that distance, t = 53 min = 0.0833 hours
We need to find the average speed of the walker for this distance. It is given by :
[tex]speed=\dfrac{distance}{time}[/tex]
[tex]speed=\dfrac{4\ km}{0.0833\ h}[/tex]
Speed, v = 48.01 km/h
So, the average speed of the walker is 48.01 km/h. Hence, this is the required solution.
A ball is thrown vertically upward with a speed of 18.0 m/s. (a) How high does it rise? (b) How long does it take to reach its highest point? (o) How long does the bali take to hit the ground after it reaches its highest point? (d) what is its velocity when it returns to the level from which it started?
Answer:
a) [tex]y=16.53m[/tex]
b) [tex]t_{up}=1.83s[/tex]
c)[tex]t_{down}=1.84s[/tex]
d) [tex]v=-18m/s[/tex]
Explanation:
a) To find the highest point of the ball we need to know that at that point the ball stops going up and its velocity become 0
[tex]v^{2} =v^{2} _{o} +2g(y-y_{o})[/tex]
[tex]0=(18)^{2} -2(9.8)(y-0)[/tex]
Solving for y
[tex]y=\frac{(18)^{2} }{2(9.8)}=16.53m[/tex]
b) To find how long does it take to reach that point:
[tex]v=v_{o}+at[/tex]
[tex]0=18-9.8t[/tex]
Solving for t
[tex]t_{up} =\frac{18m/s}{9.8m/s^{2} }= 1.83s[/tex]
c) To find how long does it take to hit the ground after it reaches its highest point we need to find how long does it take to do the whole motion and then subtract the time that takes to go up
[tex]y=y_{o}+v_{o}t+\frac{1}{2}gt^{2}[/tex]
[tex]0=0+18t-\frac{1}{2}(9.8)t^{2}[/tex]
Solving for t
[tex]t=0 s[/tex] or [tex]t=3.67s[/tex]
Since time can not be negative, we choose the second option
[tex]t_{down}=t-t_{up}=3.67s-1.83s=1.84s[/tex]
d) To find the velocity when it returns to the level from which it started we need to use the following formula:
[tex]v=v_{o}+at[/tex]
[tex]v=18m/s-(9.8m/s^{2} )(3.67s)=-18m/s[/tex]
The sign means the ball is going down
Starting from the front door of your ranch house, you walk 50.0 m due east to your windmill, and then you turn around and slowly walk 40.0 m west to a bench where you sit and watch the sunrise. It takes you 28.0 s to walk from your house to the windmill and then 42.0 s to walk from the windmill to the bench.
(a) For the entire trip from your front door to the bench, what is your average velocity?
(b) For the entire trip from your front door to the bench, what is your average speed?
Answer:
Average velocity
[tex]v=\frac{d}{t}\\ v=\frac{10m}{70s}\\v=.1428 \frac{m}{s}[/tex]
Average speed,
[tex]S=\frac{D}{t}\\ S=\frac{90}{70}\\ S=1.29\frac{m}{s}[/tex]
Explanation:
(a)Average velocity
We have to find the average velocity. We know that velocity is defined as the rate of change of displacement with respect to time.
To find the average velocity we have to find the total displacement.
since displacement along east direction is 50m
and displacement along west=40m
so total displacement,
[tex]d=50m-40m\\d=10m[/tex]
total time,
[tex]t=28 s+42 s\\t=70 s[/tex]
therefore, average velocity
[tex]v=\frac{d}{t}\\ v=\frac{10m}{70s}\\v=.1428 \frac{m}{s}[/tex]
(b)Average Speed:
Average speed is defined as the ratio of total distance to the total time
it means
Average speed= total distance/total time
here total distance,
[tex]D= 50m+40m\\D=90m[/tex]
and total time,
[tex]t= 28s+40s\\t=70s[/tex]
therefore,
Average speed,
[tex]S=\frac{D}{t}\\ S=\frac{90}{70}\\ S=1.29\frac{m}{s}[/tex]
A 3-cm high object is in front of a thin lens. The object distance is 4 cm and the image distance is –8 cm. (a) What is the focal length of the lens and the kind of lens is used? (b) What is the magnification and height of the image? (c) Describe the image in terms of its type, orientation and size relative to the object?
Answer:
a) Focal length of the lens is 8 cm which is a convex lens
b) 6 cm
c) The lens is a convex lens and produces a virtual image which is upright and two times larger than the object.
Explanation:
u = Object distance = 4 cm
v = Image distance = -8 cm
f = Focal length
Lens Equation
[tex]\frac{1}{f}=\frac{1}{u}+\frac{1}{v}\\\Rightarrow \frac{1}{f}=\frac{1}{4}+\frac{1}{-8}\\\Rightarrow \frac{1}{f}=\frac{1}{8}\\\Rightarrow f=\frac{8}{1}=-8\ cm[/tex]
a) Focal length of the lens is 8 cm which is a convex lens
Magnification
[tex]m=-\frac{v}{u}\\\Rightarrow m=-\frac{-8}{4}\\\Rightarrow m=2[/tex]
b) Height of image is 2×3 = 6 cm
Since magnification is positive the image upright
c) The lens is a convex lens and produces a virtual image which is upright and two times larger than the object.
(a) The focal length of the lens is -2.67 cm.
(b) The magnification of the image is 2 and the height is 6 cm.
(c) The imaged formed by the lens is upright, virtual and magnified.
Focal length of the lensThe focal length of the lens is determined by using lens formulas as given below;
[tex]\frac{1}{f} = \frac{1}{v} - \frac{1}{u} \\\\\frac{1}{f} = \frac{-1}{8} - \frac{1}{4} \\\\\frac{1}{f} = \frac{-1 -2}{8} = \frac{-3}{8} \\\\f = -2.67 \ cm[/tex]
Magnification of the imageThe magnification of the image is calculated as follows;
[tex]m = \frac{v}{u} \\\\m = \frac{8}{4} \\\\m = 2\\\\[/tex]
Height of the imageThe height of the image is calculated as follows;
[tex]H = mu\\\\H = 2(3cm) = 6\ cm[/tex]
Properties of the imageThe imaged formed by the lens is;
UprightVirtualTwo times larger than the object (magnified)Learn more about lens here: https://brainly.com/question/25779311
The lighting needs of a storage room are being met by six fluorescent light fixtures, each fixture containing four lamps rated at 60 W each. All the lamps are on during operating hours of the facility, which is 6 a.m. to 6 p.m., 365 days a year. The storage room is actually used for an average of 3 h a day. If the price of electricity is $0.11/kWh, determine the amount of energy and money that will be saved as a result of installing motion sensors. Also, determine the simple payback period if the purchase price of the sensor is $32 and it takes 1 h to install it at a cost of $66.
By installing motion sensors, the storage room would save $1.27 per day in energy costs. The simple payback period for installing motion sensors is approximately 77.17 days.
Explanation:To determine the amount of energy and money that will be saved as a result of installing motion sensors, we need to compare the energy consumption and cost of the current lighting system with that of the motion sensor system. Currently, the storage room uses six fluorescent light fixtures, each containing four lamps rated at 60 W each. The lamps are on for 12 hours a day. So, the total energy consumed by the current system per day is 6 * 4 * 60 W * 12 hours = 17,280 W. With an electricity price of $0.11/kWh, the cost of energy consumed per day is 17,280 W / 1000 * $0.11 = $1.90.
Now, let's consider the motion sensor system. If the room is only used for an average of 3 hours a day, the total energy consumed by the motion sensor system per day would be 6 * 4 * 60 W * 3 hours = 5,760 W. This results in a cost of 5,760 W / 1000 * $0.11 = $0.63 per day. Therefore, by installing motion sensors, the storage room would save $1.90 - $0.63 = $1.27 per day in energy costs.
To determine the simple payback period, we need to calculate the cost of the motion sensor system and the savings achieved per day. The total cost of the motion sensor system is $32 for the purchase price + $66 for installation, which equals $98. With daily savings of $1.27, the payback period can be calculated as $98 / $1.27 = 77.17 days. Therefore, the simple payback period for installing motion sensors in the storage room is approximately 77.17 days.
Learn more about Energy and cost savings here:https://brainly.com/question/32407962
#SPJ1
During World War I, the Germans had a gun called Big Bertha that was used to shell Paris. The shell had an initial speed of 2.61 km/s at an initial inclination of 81.9° to the horizontal. The acceleration of gravity is 9.8 m/s^2. How far away did the shell hit? Answer in units of km How long was it in the air? Answer in units of s.
Answer:
The shell hit at a distance of 1.9 x 10² km
The time of flight of the shell was 5.3 x 10² s
Explanation:
The position of the shell is given by the vector "r":
r = (x0 + v0 * t * cos α ; y0 + v0 * t * sin α + 1/2 g t²)
where:
x0 = initial horizontal position
v0 = magnitude of the initial velocity
t = time
α = launching angle
y0 = initial vertical position
g = acceleration of gravity
When the shell hit, the vertical component (ry) of the vector position r is 0. See figure.
Then:
ry = 0 = y0 + v0 * t * sin α + 1/2 g t²
Since the gun is at the center of our system of reference, y0 and x0 = 0
0 = t (v0 sin α + 1/2 g t)
t= 0 is discarded as solution
v0 sin α + 1/2 g t = 0
t = -2v0 sin α / g
t = (-2 * 2610 m/s * sin 81.9°)/ (-9.8 m/s²) = 5.3 x 10² s. This is the time of flight of the shell until it hit.
Then, the distance at which the shell hit is:
Distance = Module of r = ( x0 + v0 * t * cos α; 0) = x0 + v0 * t * cos α
Distance = 2.61 km/s * 5.3 x 10² s * cos 81.9 = 1.9 x 10² km
A particular Bohr orbit in a hydrogen atom has a total energy of -0.28 eV . What is the kinetic energy of the electron in this orbit? What is the electric potential energy of the system?
Answer:
Explanation:
The total energy of an electron in an orbit consists of two components
1 ) Potential energy which is - ve because the field is attractive
2) Kinetic energy which represents moving electron having some velocity.
Kinetic is always positive.
3 ) In an orbit , The magnitude of potential energy is twice that of kinetic energy. So if -2E is the value of potential energy E wil be the value of kinetic energy.
4 ) Total energy will become some of potential energy and kinetic energy
-2E + E = -E
5 ) So total energy becomes equal to kinetic energy with only sign reversed.
In the given case total energy is -0.28 eV . Hence kinetic energy will be +0.28 eV.
When kinetic energy is calculated as +.28 eV , the potential energy will be
- 2 x .28 or - 0.56 eV .
Consider two force vectors in the xy-horizontal plane. Suppose a force of 12.7 N pointing along the +x-axis is added to a second force of 18.1 N directed at 30 degrees to the +x-axis , also in the horizontal plane. Find the resultant vector for this sum. magnitude direction degrees above the +x-axis in the horizontal plane
Answer:
[tex]F_1+F_2= (28.26, 9.05) N[/tex]
[tex]\alpha = 17.7\º[/tex]
[tex]F = 29.67 N[/tex]
Explanation:
Hi!
In a (x, y) coordinate representation, the two forces are:
[tex]F_1=(12.7N, 0)\\F_2=(18.1N\cos(30\º), 18.1N \sin(30\º) )\\\cos(\º30)=0.86\\\sin(\º30)= 0.5[/tex]
The sum of the two forces is:
[tex]F_1 + F_2 = ( 12.7 + 0.86*18.1, 18.1*0.5) N[/tex]
[tex]F_1+F_2= (28.26, 9.05) N[/tex]
The angle to x-axis is calculated using arctan:
[tex]\alpha = \arctan(\frac{F_y}{F_x}) = \arctan(\frac{9.05}{28.26} = 17.7\º[/tex]
The magnitude is:
[tex]F = \sqrt {F_x^2 + F_y^2}= \sqrt{798.6 + 81.9} = 29.67 N[/tex]
A particle with a charge of -60.0 nC is placed at the center of a nonconducting spherical shell of inner radius 20.0 cm and outer radius 33.0 cm. The spherical shell carries charge with a uniform density of-1.30 μC/m^3. A proton moves in a circular orbit just outside the shcal shell. Calculate the speed of the proton.
Answer:
Explanation:
Total volume of the shell on which charge resides
= 4/3 π ( R₁³ - R₂³ )
= 4/3 X 3.14 ( 33³ - 20³) X 10⁻⁶ m³
= 117 x 10⁻³ m³
Charge inside the shell
-117 x 10⁻³ x 1.3 x 10⁻⁶
= -152.1 x 10⁻⁹ C
Charge at the center
= - 60 x 10⁻⁹ C
Total charge inside the shell
= - (152 .1 + 60 ) x 10⁻⁹ C
212.1 X 10⁻⁹C
Force between - ve charge and proton
F = k qQ / R²
k = 9 x 10⁹ .
q = 1.6 x 10⁻¹⁹ ( charge on proton )
Q = 212.1 X 10⁻⁹ ( charge on shell )
R = 33 X 10⁻² m ( outer radius )
F = [tex]\frac{9\times10^9\times1.6\times10^{-19}\times212.1\times 10^{-9}}{(33\times10^{-2})^2}[/tex]
F = 2.8 X 10⁻¹⁵ N
This force provides centripetal force for rotating proton
mv² / R = 2.8 X 10⁻¹⁵
V² = R X 2.8 X 10⁻¹⁵ / m
= 33 x 10⁻² x 2.8 x 10⁻¹⁵ /( 1.67 x 10⁻²⁷ )
[ mass of proton = 1.67 x 10⁻²⁷ kg)
= 55.33 x 10¹⁰
V = 7.44 X 10⁵ m/s
The driver of a car slams on the brakes when he sees a tree blocking the road. The car slows uniformly with acceleration of -5.75 m/s^2 for 4.40 s, making straight skid marks 60.0 m long, all the way to the tree. With what speed does the car then strike the tree? m/s
The car strikes the tree at approximately 10.7 m/s after slowing down with a uniform acceleration of -5.75 m/s^2 for 60.0 m.
To calculate the speed with which the car strikes the tree, we'll use the kinematic equations for uniformly accelerated motion. Given the uniform acceleration of -5.75 m/s2 and the time of 4.40 s, we can use the following equation to find the initial velocity (vi) before the car started braking:
v = vi + at
Where:
By rearranging the equation to solve for the initial velocity (vi), we get:
vi = v - at
Substituting the known values:
vi = 0 - (-5.75 m/s2 * 4.40 s)
vi = 25.3 m/s
This is the speed with which the car was travelling before it hit the brakes. However, to find the speed at which the car strikes the tree, we must consider the distance of the skid marks. Using the kinematic equation for distance (d), where d equals the initial velocity times time plus half the acceleration times time squared:
d = vit + rac{1}{2}at2
Since the distance to the tree is 60.0 m and we're looking for the speed at the end of this distance, we rearrange the equation to solve for final velocity (v). But first, we need to calculate the time it takes to stop over this distance. We can use the formula:
d = rac{vi2 - v2}{2a}
By solving for v we find:
v = [tex]\sqrt{x}[/tex]{vi2 - 2ad}
v = [tex]\sqrt{x}[/tex]{(25.3 m/s)2 - 2(-5.75 m/s2)(60.0 m)}
v = [tex]\sqrt{x}[/tex]{(640.09) - (-690)}
v = 10.7 m/s
Therefore, the car strikes the tree at approximately 10.7 m/s.
The car strikes the tree at a speed of 0.98 m/s.
To determine the speed at which the car strikes the tree, we can utilize the kinematic equations of motion. We are given the following data:
Initial velocity (Vi): UnknownFinal velocity (Vf): ? (what we need to find)Acceleration (a): -5.75 m/s² (negative as it is a deceleration)Time (t): 4.40 sDistance (d): 60.0 mFirst, we calculate the initial velocity using the equation:
Distance d = Vi * t + 0.5 * a * t²Substituting the given values:
60.0 m = Vi * 4.40 s + 0.5 * (-5.75 m/s²) * (4.40 s)²Solving this:
60.0 m = Vi * 4.40 s - 55.66 mVi * 4.40 s = 115.66 mVi = 115.66 m / 4.40 s = 26.28 m/sNow, to find the final velocity when the car strikes the tree, we use the kinematic equation:
Final velocity (Vf) =Vi + a * tSubstituting the values:
Vf= 26.28 m/s + (-5.75 m/s²) * 4.40 sVf = 26.28 m/s - 25.30 m/sVf = 0.98 m/sSo, the car strikes the tree at a speed of 0.98 m/s.
What phase difference between two otherwise identical harmonic waves, moving in the same direction along a stretched string, will result in the combined wave having an amplitude 0.6 times that of the amplitude of either of the combining waves? Express your answer in degrees.
Answer:
[tex]\theta=145[/tex]
Explanation:
The amplitude of he combined wave is:
[tex]B=2Acos(\theta/2)\\[/tex]
A, is the amplitude from the identical harmonic waves
B, is the amplitude of the resultant wave
θ, is the phase, between the waves
The amplitude of the combined wave must be 0.6A:
[tex]0.6A=2Acos(\theta/2)\\ cos(\theta/2)=0.3\\\theta/2=72.5\\\theta=145[/tex]
The driver of a car traveling on the highway suddenly slams on the brakes because of a slowdown in traffic ahead. A) If the car’s speed decreases at a constant rate from 74 mi/h to 50 mi/h in 3.0 s, what is the magnitude of its acceleration, assuming that it continues to move in a straight line?Answer is in mi/h^2B) What distance does the car travel during the braking period?Answer is in ft
To determine the magnitude of acceleration, use the formula (final velocity - initial velocity) / time. To calculate the distance traveled during the braking period, use the formula (initial velocity + final velocity) / 2 * time.
Explanation:The magnitude of acceleration can be calculated using the formula:
acceleration = (final velocity - initial velocity) / time
Convert the speeds to feet per second by multiplying by 1.46667 (1 mile = 5280 feet, 1 hour = 3600 seconds).Calculate the acceleration by plugging in the values:acceleration = (50 mi/h * 1.46667 ft/s - 74 mi/h * 1.46667 ft/s) / 3 s
The distance traveled during the braking period can be calculated using the formula:
distance = (initial velocity + final velocity) / 2 * time
Calculate the distance by plugging in the values:distance = (74 mi/h * 1.46667 ft/s + 50 mi/h * 1.46667 ft/s) / 2 * 3 s
Learn more about Acceleration and Distance during Braking here:https://brainly.com/question/27999717
#SPJ12
A 1 kg particle moves upward from the origin to (23) m. Wit is work done by the force of gravity which is in - y direction s B. 19,6 D. 29.4) A.-19.6 J C. -29.4 J
Answer:
Explanation:
mass, m = 1 kg
Position (2, 3 ) m
height, h = 2 m
acceleration due to gravity, g = 9.8 m/s^2
Here, no force is acting in horizontal direction, the force of gravity is acting in vertical direction, so the work done by the gravitational force is to be calculated.
Force mass x acceleration due to gravity
F = 1 x 9.8 = 9.8 N
Work = force x displacement x CosФ
Where, Ф be the angle between force vector and the displacement vector.
Here the value of Ф is 180° as the force acting vertically downward and the displacement is upward
So, W = 9.8 x 2 x Cos 180°
W = - 19.6 J
Thus, option (A) is correct.
Three vectors →a, →b, and →c each have a magnitude of 50 m and lie in an xy plane. Their directions relative to the positive direction of the x axis are 30°, 195°, and 315°, respectively. What are (a) the magnitude and (b) the angle of the vector →a+→b+→c and (c) the magnitude and (d) the angle of →a−→b+→c? What are the (e) magnitude and (f) angle of a fourth vector →d such that (→a+→b)−(→c+→d)=0 ?
Answer:
a) 38.27 b) 322.5°
c) 126.99 d) 1.17°
e) 62.27 e) 139.6°
Explanation:
First of all we have to convert the coordinates into rectangular coordinates, so:
a=( 43.3 , 25)
b=( -48.3 , -12.94)
c=( 35.36 , -35.36)
Now we can do the math easier (x coordinate with x coordinate, and y coordinate with y coordinate):
1.) a+b+c=( 30.36 , -23.3) = 38.27 < 322.5°
2.) a-b+c=( 126.96 , 2.6) = 126.99 < 1.17°
3.) (a+b) - (c+d)=0 Solving for d:
d=(a+b) - c = ( -40.36 , 47.42) = 62.27 < 139.6°
The dimensionless parameter is used frequently in relativity. As y becomes larger and larger than 1, it means relativistic effects are becoming more and more important. What is y if v = 0.932c? A. 0.546 B. 0.362 C. 2.76 D. 3.83 E. 7.61
The relativistic factor y (gamma) quantifies the relativistic effects based on the speed of an object. In your given case with v = 0.932c, gamma would be approximately 2.61, indicating significant relativistic effects. The provided options do not include this value, suggesting some error.
Explanation:The dimensionless parameter used in relativity is denoted as y (gamma), and it is referred to as the relativistic factor. It is associated with the relative speed of an object and is defined by the equation y = 1/√(1 − (v²/c²)), where v is the object's velocity and c is the speed of light.
For your case where v = 0.932c, we'll substitute this into the formula and solve for y. This results in y being approximately equal to 2.61. This isn't available in the provided options, which would indicate an error in the question or provided choices.
Without a doubt, as y approaches and surpasses 1, the relativistic effects become more noticeable in an object's behavior. Significant relativistic effects mean that the classical interpretation, where we neglect these effects, becomes increasingly inaccurate.
Learn more about Relativistic Factor here:https://brainly.com/question/31975532
#SPJ3
A 2.0-mm-diameter copper ball is charged to 40 nC . What fraction of its electrons have been removed? The density of copper is 8900 kg/m^3.
Answer:
0.02442 × 10⁻⁹
Explanation:
Given:
Diameter of copper ball = 2.00 mm = 0.002 m
Charge on ball = 40 nC = 40 × 10⁻⁹ C
Density of copper = 8900 Kg/m³
Now,
The number of electrons removed, n = [tex]\frac{\textup{Charge on ball}}{\textup{Charge of an electron}}[/tex]
also, charge on electron = 1.6 × 10⁻¹⁹ C
Thus,
n = [tex]\frac{40\times10^{-9}}{1.6\times10^{-19}}[/tex]
or
n = 25 × 10¹⁰ Electrons
Now,
Mass of copper ball = volume × density
Or
Mass of copper ball = [tex]\frac{4}{3}\pi(\frac{d}{2})^3[/tex] × 8900
or
Mass of copper ball = [tex]\frac{4}{3}\pi(\frac{0.002}{2})^3[/tex] × 8900
or
Mass of copper ball = 0.03726 grams
Also,
molar mass of copper = 63.546 g/mol
Therefore,
Number of mol of copper in 0.03726 grams = [tex]\frac{ 0.03726}{63.546}[/tex]
or
Number of mol of copper in 0.03726 grams = 5.86 × 10⁻⁴ mol
and,
1 mol of a substance contains = 6.022 × 10²³ atoms
Therefore,
5.86 × 10⁻⁴ mol of copper contains = 5.86 × 10⁻⁴ × 6.022 × 10²³ atoms.
or
5.86 × 10⁻⁴ mol of copper contains = 35.88 × 10¹⁹ atoms
Now,
A neutral copper atom has 29 electrons.
Therefore,
Number of electrons in ball = 29 × 35.88 × 10¹⁹ = 1023.37 × 10¹⁹ electrons.
Hence,
The fraction of electrons removed = [tex]\frac{25\times10^{10}}{1023.37\times10^{19}}[/tex]
or
The fraction of electrons removed = 0.02442 × 10⁻⁹
The fraction of electrons removed from the copper ball can be calculated by comparing its net charge to the charge of a single electron. Using the provided information, we can find that approximately 2.5 x 10^10 electrons have been removed from the ball. To determine the fraction, we need to compare this number to the total number of electrons in the ball, which can be calculated using the mass, density, and atomic mass of copper. By plugging in the values, we can find the fraction of electrons removed.
Explanation:To determine the fraction of electrons that have been removed from the copper ball, we need to compare the net charge of the ball to the charge of a single electron. The net charge of the ball is 40 nC, which is equivalent to 40 x 10^-9 C. The charge of a single electron is 1.60 x 10^-19 C.
We can calculate the number of electrons that have been removed using the formula:
Number of electrons removed = Net charge of the ball / Charge of a single electron
Number of electrons removed = (40 x 10^-9 C) / (1.60 x 10^-19 C) = 2.5 x 10^10 electrons
To find the fraction of electrons removed, we need to compare the number of electrons removed to the total number of electrons in the ball. The total number of electrons in the ball can be calculated using the formula:
Total number of electrons = Number of copper atoms x Number of electrons per copper atom
The number of copper atoms can be calculated using the formula:
Number of copper atoms = Mass of the ball / Atomic mass of copper
The mass of the ball can be calculated using the formula:
Mass of the ball = Volume of the ball x Density of copper
Given that the diameter of the ball is 2.0 mm, the volume of the ball can be calculated using the formula for the volume of a sphere:
Volume of the ball = (4/3) x pi x (radius)^3
As the ball is a sphere, the radius is half the diameter, so the radius is 1.0 mm or 1 x 10^-3 m.
Using the given density of copper (8900 kg/m^3) and atomic mass of copper (63.5 g/mol), we can now calculate the fraction of electrons removed:
Fraction of electrons removed = Number of electrons removed / Total number of electrons = (2.5 x 10^10 electrons) / (Number of copper atoms x Number of electrons per copper atom)
Two resistors of 5.0 and 9.0 ohms are connected inparallel. A
4.0 Ohm resistor is then connected in series withthe parallel
combination. A 6.0V battery is then connected tothe series-parallel
combination. What is the current throughthe 9.0 ohm resistor?
Answer:
The current through [tex]9 \Omega[/tex] is 0.297 A
Solution:
As per the question:
[tex]R_{5} = 5.0 \Omega[/tex]
[tex]R_{9} = 9.0 \Omega[/tex]
[tex]R_{4} = 5.0 \Omega[/tex]
V = 6.0 V
Now, from the given circuit:
[tex]R_{5}[/tex] and [tex]R_{9}[/tex] are in parallel
Thus
[tex]\frac{1}{R_{eq}} = \frac{1}{R_{5}} + \frac{1}{R_{9}}[/tex]
[tex]R_{eq} = \frac{R_{5}R_{9}}{R_{5} + R_{9}}[/tex]
[tex]R_{eq} = \frac{5.0\times 9.0}{5.0 + 9.0} = 3.2143 \Omega[/tex]
Now, the [tex]R_{eq}[/tex] is in series with [tex]R_{4}[/tex]:
[tex]R'_{eq} = R_{eq} + R_{4} = 3.2143 + 4.0 = 7.2413 \Omega[/tex]
Now, to calculate the current through [tex]R_{9}[/tex]:
[tex]V = I\times R'_{eq}[/tex]
[tex]I = {6}{7.2143} = 0.8317 A[/tex]
where
I = circuit current
Now,
Voltage across [tex]R_{eq}[/tex], V':
[tex]V' = I\times R_{eq}[/tex]
[tex]V' = 0.8317\times 3.2143 = 2.6734 V[/tex]
Now, current through [tex]R_{9}[/tex], I' :
[tex]I' = \frac{V'}{R_{9}}[/tex]
[tex]I' = \frac{2.6734}{9.0} = 0.297 A[/tex]
Final answer:
To find the current through the 9.0 ohm resistor in a series-parallel circuit, we can calculate the equivalent resistance of the parallel combination.
Explanation:
To find the current through the 9.0 ohm resistor, we need to first determine the equivalent resistance of the circuit. The two resistors of 5.0 and 9.0 ohms that are connected in parallel have an equivalent resistance given by the formula:
1/Req = 1/R1 + 1/R2
1/Req = 1/5.0 + 1/9.0
1/Req = (9.0 + 5.0)/(5.0 * 9.0)
1/Req = 14.0/45.0
Req = 45.0/14.0 ≈ 3.21 ohms
The equivalent resistance of the parallel combination is approximately 3.21 ohms.
Answer the following question. Show your work to receive credit. A hypothetical element has an atomic weight of 48.68 amu. It consists of three isotopes having masses of 47.00 amu, 48.00 amu, and 49.00 amu. The lightest-weight isotope has a natural abundance of 10.0%. What is the percent abundance of the heaviest isotope?
Answer:
percent abundance of the heaviest isotope is 78 %
Explanation:
given data
atomic weight = 48.68 amu
mass 1 = 47 amu
mass 2 = 48 amu
mass 3 = 49 amu
natural abundance = 10 %
to find out
percent abundance of the heaviest isotope
solution
we consider here percent abundance of the heaviest isotope is x
so here lightest isotope = 47 amu of 10 % ..........1
and heaviest isotope = 49 amu of x ................2
and middle isotope = 48 amu of 100 - 10 - x ........3
so
average mass = add equation 1 + 2 + 3
average mass = 10% ( 47) + x% ( 49) + (90 - x) % (48)
48.68 = 4.7 + 0.49 x + 43.2 - 0.48 x
x = 0.78
so percent abundance of the heaviest isotope is 78 %
Calculate the velocity of a car (in m/s) that starts from rest and accelerates at 5 m/s^2 for 6 seconds.
Answer:
The final velocity of the car is 30 m/s.
Explanation:
Given that,
Initial speed of the car, u = 0
Acceleration of the car, [tex]a=5\ m/s^2[/tex]
Time taken, t = 6 s
Let v is the final velocity of the car. It can be calculated using first equation of kinematics as :
[tex]v=u+at[/tex]
[tex]v=at[/tex]
[tex]v=5\ m/s^2\times 6\ s[/tex]
v = 30 m/s
So, the final velocity of the car is 30 m/s. Hence, this is the required solution.
A golfer takes three putts to get the ball into the hole. The first putt displaces the ball 3.45 m north, the second 1.53 m southeast, and the third 0.877 m southwest. What are (a) the magnitude and (b) the angle between the direction of the displacement needed to get the ball into the hole in just one putt and the direction due east?
Answer:
magnitude is 2.52 m with 66.15° north east
Explanation:
given data
displace 1 = 3.45 m north = 3.45 j
displace 2 = 1.53 m southeast = 1.53 cos(315) i + sin(315) j
displace 3 = 0.877 m southwest = 0.877 cos(225) i- sin(225) j
to find out
displacement and direction
solution
we consider here direction i as east and direction j as north
so here
displacement = displace 1 + displace 2 + displace 3
displacement = 3.45 j + 1.53 cos(315) i + sin(315) j + 0.877 cos(225) i- sin(225) j
displacement = 3.45 j + 1.081 i -1.0818 j - 0.062 i -0.062 j
displacement = 1.019 i + 2.306 j
so magnitude
magnitude = [tex]\sqrt{1.019^{2} + 2.306^{2}}[/tex]
magnitude = 2.52
and
angle will be = arctan(2.306/1.019)
angle = 1.15470651 rad
angle is 66.15 degree
so magnitude is 2.52 m with 66.15° north east
In 1865, Jules Verne proposed sending men to the Moon by firing a space capsule from a 220-m-long cannon with final speed of 10.97 km/s. What would have been the unrealistically large acceleration experienced by the space travelers during their launch? (A human can stand an acceleration of 15g for a short time.) Compare your answer with the free-fall acceleration, 9.80 m/s^2.
The acceleration experienced by the space travelers during their launch would be considered unrealistically large. It would exceed both the limits of human endurance and the acceleration experienced during free fall.
Explanation:To calculate the acceleration experienced by the space travelers during their launch, we can use the formula:
Acceleration = (Final Velocity - Initial Velocity) / Time
In this case, the final velocity is given as 10.97 km/s, and the initial velocity is 0 m/s (since the spaceship starts from rest). The time is not provided, so we cannot calculate the exact acceleration. However, we can compare it to the acceleration that a human can withstand, which is 15g for a short time. One g is equivalent to the acceleration due to gravity, which is approximately 9.8 m/s².
So, 15g is equal to 15 * 9.8 m/s² = 147 m/s². Therefore, any acceleration larger than 147 m/s² would be unrealistically large for the space travelers during their launch.
Comparing this with the free-fall acceleration, which is approximately 9.8 m/s², we can see that the acceleration proposed by Jules Verne would be much larger than both the limits of human endurance and the acceleration experienced during free fall.
The age of the universe is thought to be about 14 billion years. Assuming two significant figures, (a) write this in exponential notation in units of years, and (b) use the method shown in class to convert this to seconds. Give your answer in exponential notation.
Answer:
a) 14×10⁹ years
b) 4.4×10¹⁷ seconds
Explanation:
1 billion years = 1000000000 years
1000000000 years = 10⁹ years
14 billion years
= 14×1000000000 years
= 14000000000 years
= 14×10⁹ years
∴ 14 billion years = 14×10⁹ years
b) 1 year = 365.25×24×60×60 seconds
14×10⁹ years = 14×10⁹×365.25×24×60×60
= 441806400×10⁹ seconds
Rounding off, we get
= 4.4×10⁸×10⁹
= 4.4×10¹⁷ seconds
∴ 14 billion years = 4.4×10¹⁷ seconds
In a thunderstorm, electric charge builds up on the water droplets or ice crystals in a cloud. Thus, the charge can be considered to be distributed uniformly throughout the cloud. The charge builds up until the electric field at the surface of the cloud reaches the value at which the surrounding air "breaks down."
In general, the term "breakdown" refers to the situation when a dielectric (insulator) such as air becomes a conductor. In this case, it means that, because of a very strong electric field, the air becomes highly ionized, enabling it to conduct the charge from the cloud to the ground or another nearby cloud. The ionized air then emits light as the electrons and ionized atoms recombine to form excited molecules that radiate light. The resulting large current heats up the air, causing its rapid expansion. These two phenomena account for the appearance of lightning and the sound of thunder.
The point of this problem is to estimate the maximum amount of charge that a cloud can contain before breakdown occurs. For the purposes of this problem, take the cloud to be a sphere of diameter 1.00 km . Take the breakdown electric field of air to be Eb=3.00106N/C .
question 1:
Estimate the total charge q on the cloud when the breakdown of the surrounding air begins.
Express your answer numerically in coulombs, to three significant figures, using ?0=8.8510?12C2/(N?m2) .
Question 2:
Assuming that the cloud is negatively charged, how many excess electrons are on this cloud?
The total charge on a cloud when breakdown of the surrounding air begins is calculated using Gauss's Law. The breakdown field strength, radius of the cloud and permittivity of free space are needed. The number of excess electrons in the cloud is then found by dividing the total charge by the charge of an electron.
Explanation:The charge q on a spherically symmetric object, such as our cloud, when an electric field E is induced on its surface can be calculated using Gauss's Law, which states that the total charge enclosed by a Gaussian surface is equal to the electric field times the surface area of the Gaussian surface divided by the permittivity of free space (ε0). In our case, E = Eb (the breakdown field strength), the radius of the sphere, r = 0.5km = 500m (half the diameter), and ε0 = 8.85 x 10^-12 C2/N·m2. Therefore, q = (4πr2Eb)ε0.
For question 2: To calculate the number of excess electrons in the cloud, we should recall that the charge of an electron is -1.602 x 10^-19 C. Therefore, the number of excess electrons, N, can be calculated using N = q / Charge of an electron.
Learn more about Electric Charge in a Thundercloud here:https://brainly.com/question/33839188
#SPJ3
A single point charge is placed at the center of an imaginary cube that has 10 cm long edges. The electric flux out of one of the cube's sides is -1 kN·m^2/C. How much charge is at the center?
Answer:
Explanation:
Given:
Length of each side of the cube, [tex]L=10\ cm[/tex]
The Elecric flux through one of the side of the cube is, [tex]\phi =-1 kNm^2/C.[/tex]
The net flux through a closed surface is defined as the total charge that lie inside the closed surface divided by [tex]\epsilon_0[/tex]
Since Flux is a scalar quantity. It can added to get total flux through the surface.
[tex]\phi_{total}=\dfrac{Q_{in}}{\epsilon_0}\\6\times {-1}\times 10^3=\dfrac{Q_{in}}{\epsilon_0}\\\\Q_{in}=-6}\times 10^3\epsilon_0\\Q_{in}=-6}\times 10^3\times8.85\times 10^{-12}\\Q_{in}=-53.1\times10^{-9}\ C[/tex]
So the the charge at the centre is calculated.
A bicyclist starts at rest and speeds up to 30 m/s while accelerating at 4 m/s^2. Determine the distance traveled.
Answer:
Distance, d = 112.5 meters
Explanation:
Initially, the bicyclist is at rest, u = 0
Final speed of the bicyclist, v = 30 m/s
Acceleration of the bicycle, [tex]a=4\ m/s^2[/tex]
Let s is the distance travelled by the bicyclist. The third equation of motion is given as :
[tex]v^2-u^2=2as[/tex]
[tex]s=\dfrac{v^2-u^2}{2a}[/tex]
[tex]s=\dfrac{(30)^2}{2\times 4}[/tex]
s = 112.5 meters
So, the distance travelled by the bicyclist is 112.5 meters. Hence, this is the required solution.