In the given reaction, label the species as acid, base, conjugate acid, and conjugate base. (a) Acid: NH4+, Base: H2O, Conjugate Acid: H3O+, Conjugate Base: NH3. (b) Acid: CN-, Base: H2O, Conjugate Acid: HCN, Conjugate Base: OH-
Explanation:(a) In the reaction: NH4+(aq) + H2O(l) ⇌ NH3(aq) + H3O+(aq), we have NH4+ as the acid and H2O as the base. After the reaction, NH3 becomes the conjugate base and H3O+ becomes the conjugate acid.
(b) In the reaction: CN-(aq) + H2O(l) ⇌ HCN(aq) + OH-(aq), we have CN- as the acid and H2O as the base. After the reaction, HCN becomes the conjugate acid and OH- becomes the conjugate base.
Learn more about Species identification in acid-base reactions here:https://brainly.com/question/31835057
#SPJ6
Write the net ionic equation (including phases) that corresponds to fe(clo4)2
The compound Fe(ClO4)2 in water would dissociate into its ions, which are Fe²+ and 2ClO4¯. A specific net ionic equation cannot be given without knowledge of the reactants.
Explanation:The net ionic equation would be the result of considering all the ions in the reaction of Fe(ClO4)2, which is iron(II) perchlorate, with all possible reactants. However, without knowing these reactants, we can't provide a specific net ionic equation. Generally, important concepts here include understanding how to balance equations and predict solubility based on common rules. In the case of Fe(ClO4)2 in water, this compound is highly soluble and would dissociate into its ions in water. Generally, you would expect it to dissociate into Fe²+ and 2ClO4¯ ions in solution.
Learn more about Net Ionic Equations here:https://brainly.com/question/35304253
#SPJ3
When NaOH is added to water, the hydroxide concentration increases. What can you conclude about NaOH?
Answer:
NaOH dissociates into ions.
Explanation:
Hydroxide is one of the ions that compose NaOH, therefore the NaOH must dissociate into its constituent ions:
NaOH ⇒ Na⁺ + OH⁻
How does size influence the appearance of a star? Give an example in your response
ILL GIVE 40PTS
When the size of a star increases, the brighter it gets.
The color of the star is determined by the temperature.
If the temperature of the star is lower, that means the star is an orange/red color.
If the star's temperature is higher, that means the star is an blue/white color.
If a 3.00-l flask contains 0.400 mol of co2 and 0.100 mol of o2 at equilibrium, how many moles of co are also present in the flask?
The equilibrium constant is the proportion of the equilibrium concentration of the product to the reactants. The moles of CO present in a flask is 1.89 moles.
What are moles?Moles are the product of the molar concentration and the volume of the solution. It is given in mol.
The balanced chemical reaction can be shown as:
[tex]\rm 2CO(g) + O_{2}(g) \rightarrow 2CO_{2}(g)[/tex]
The equilibrium constant is given as,
[tex]\rm K_{c} = \dfrac{[CO_{2}]^{2}}{[CO_{2}]^{2} [O_{2}]}[/tex]
The concentration of carbon dioxide is calculated as:
[tex]\dfrac{0.4 \;\rm mol}{3\;\rm L} = 0.13[/tex]
The concentration of oxygen is calculated as:
[tex]\dfrac{0.1 \;\rm mol}{3\;\rm L} = 0.03[/tex]
Substituting values in the formula of the equilibrium constant:
[tex]\begin{aligned}{1.4 \times 10^{2} &= \rm \dfrac{0.13^{2}}{ [CO]^{2} \times 0.03}\\\\\rm [CO] &= \sqrt{0.004} \\\\&= 0.63 \end{aligned}[/tex]
The moles of carbon monoxide will be [tex]0.63 \times 3 = 1.89\;\rm moles.[/tex]
Therefore, 1.89 moles of carbon monoxide are present in the flask.
Learn more about moles here:
https://brainly.com/question/12887846
The correct answer is that there are 0.200 moles of CO present in the flask at equilibrium.
To solve this problem, we need to consider the chemical equilibrium of the reaction involved, which is the decomposition of carbon dioxide (CO2) into carbon monoxide (CO) and oxygen (O2). The balanced chemical equation for this reaction is:
[tex]\[ \text{CO}_2(g) \rightleftharpoons \text{CO}(g) + \frac{1}{2}\text{O}_2(g) \][/tex]
According to the stoichiometry of the balanced equation, for every mole of CO2 that decomposes, one mole of CO is produced and half a mole of O2 is produced.
Given that we have 0.400 moles of CO2 and 0.100 moles of O2 in the flask, we can use the stoichiometry of the reaction to find out how many moles of CO are present. Since the reaction produces one mole of CO for every mole of CO2 that decomposes, we can calculate the moles of CO produced by the decomposition of CO2 as follows:
[tex]\[ \text{Moles of CO produced} = \text{Moles of CO2 decomposed} \][/tex]
However, we also know that the reaction produces half a mole of O2 for every mole of CO2 that decomposes. Therefore, the moles of O2 produced can be calculated as:
[tex]\[ \text{Moles of O2 produced} = \frac{1}{2} \times \text{Moles of CO2 decomposed} \][/tex]
Since we have 0.100 moles of O2, we can set up the equation:
[tex]\[ 0.100 = \frac{1}{2} \times \text{Moles of CO2 decomposed} \][/tex]
Solving for the moles of CO2 decomposed, we get:
[tex]\[ \text{Moles of CO2 decomposed} = 0.100 \times 2 = 0.200 \][/tex]
This means that 0.200 moles of CO2 have decomposed to produce 0.200 moles of CO and 0.100 moles of O2. Therefore, the moles of CO present in the flask at equilibrium is 0.200 moles.
The average rate of consumption of br− is 1.86×10−4 m/s over the first two minutes. what is the average rate of formation of br2 during the same time interval?
The average rate of formation of Br₂ during the first two minutes is 1.12×10⁻⁴ M/s.
This was calculated using the stoichiometric relationship between Br⁻ and Br₂ in the given reaction. The rate of formation is obtained by multiplying the rate of disappearance of Br⁻ by the stoichiometric ratio (3/5).
The chemical reaction in question is:
5Br⁻(aq) + BrO₃⁻(aq) + 6H⁺ (aq) → 3Br₂(aq) + 3H₂O(l)
Given that the average rate of consumption of Br⁻ (bromide ions) is 1.86×10⁻⁴ M/s, we need to determine the average rate of formation of Br₂ (bromine) during the same time interval.
This reaction shows that for every 5 moles of Br− consumed, 3 moles of Br₂ are produced. Therefore, the rate of formation of Br₂ will be:
Rate of Br₂ formation = (3/5) × Rate of Br⁻ consumption
Using the given rate of Br− consumption:
Rate of Br₂ formation = (3/5) × 1.86×10⁻⁴ M/s = 1.12×10⁻⁴ M/s
Thus, the average rate of formation of Br₂ during the first two minutes is 1.12×10⁻⁴ M/s.
Are there any other methods you could use to determine phosphate content in the colas
How long will it take for 20% of the u−238 atoms in a sample of u−238 to decay?
It will require for 20 % of U-238 atoms in a sample of U-238 to decay.
Further Explanation:
Radioactive decay involves stabilization of unstable atomic nucleus and is accompanied by the release of energy. This emission of energy can be in form of different particles like alpha, beta and gamma particles.
Half-life is time period in which half of the radioactive species is consumed. It is denoted by .
The expression for half-life is given as follows:
[tex]\lambda = \dfrac{{0.693}}{{{t_{{\text{1/2}}}}}}[/tex] …… (1)
Where,
[tex]{t_{{\text{1/2}}}}[/tex] is half-life period
[tex]\lambda[/tex] is the decay constant.
The half-life period for decay of U-238 is [tex]4.5 \times {10^9}{\text{ yrs}}[/tex].
Substitute [tex]4.5 \times {10^9}{\text{ yrs}}[/tex] for [tex]{t_{{\text{1/2}}}}[/tex] in equation (1).
[tex]\begin{aligned}\lambda&= \dfrac{{0.693}}{{4.5 \times {{10}^9}{\text{ yrs}}}} \\&= 1.54 \times {10^{ - 10}}{\text{ yr}}{{\text{s}}^{ - 1}} \\\end{galigned}[/tex]
Since it is radioactive decay, it is first-order reaction. Therefore the expression for rate of decay of U-238is given as follows:
[tex]\lambda = \dfrac{{2.303}}{t}\log \left( {\dfrac{a}{{a - x}}} \right)[/tex]
…… (2)
Where,
[tex]\lambda[/tex] is the decay or rate constant.
t is the time taken for decay process.
a is the initial amount of sample.
x is the amount of sample that has been decayed.
Rearrange equation (2) to calculate t.
[tex]t = \dfrac{{2.303}}{\lambda }\log \left( {\dfrac{a}{{a - x}}} \right)[/tex] …… (3)
Consider 100 g to be initial amount of U-238. Since 20 % of it is decayed in radioactive process, 20 g of U-238 is decayed and therefore 80 g of the sample is left behind.
Substitute 100 g for a, 80 g for (a–x) and [tex]1.54 \times {10^{ - 10}}{\text{ yr}}{{\text{s}}^{ - 1}}[/tex] for [tex]\lambda[/tex] in equation (3).
[tex]\begin{aligned}t &= \dfrac{{2.303}}{{1.54 \times {{10}^{ - 10}}{\text{ yr}}{{\text{s}}^{ - 1}}}}\log \left( {\dfrac{{100{\text{ g}}}}{{80{\text{ g}}}}} \right)\\&= 1.449 \times {10^9}{\text{ yrs}}\\\end{aligned}[/tex]
Learn more:
What nuclide will be produced in the given reaction? https://brainly.com/question/3433940Calculate the nuclear binding energy: https://brainly.com/question/5822604Answer details:
Grade: Senior School
Subject: Chemistry
Chapter: Radioactivity
Keywords: half-life, t, a, x, a – x, 1.449*10^9 yrs, U-238, decay constant, radioactivity, half-life period.
What mass (in grams) of iron(iii) oxide contains 58.7 g of iron? iron(iii) oxide is 69.94 % iron by mass?
how many grams of glucose, C6H12O6, in 2.47 mole?
One of the most important industrial sources of ethanol is the reaction of steam with ethene derived from crude oil: c2h4(g) + h2o(g) â c2h5oh(g)δh o rxn = â47.8 kjkc = 9.00 à 103 at 600. k at equilibrium, the partial pressure of ethanol (c2h5oh) is 200. atm and the partial pressure of water is 400. atm. calculate the partial pressure of ethene (c2h4).
is a measure of the quantity of matter in an object. A) Volume B) Mass C) Density D)Weight
Answer:
Mass is a measure of the quantity of matter in an object
Explanation:
Calculate the theoretical yield of ammonia produced by the reaction of 100g of H2 gas and 200g of N2 gas
The ph of a 0.55 m aqueous solution of hypobromous acid, hbro, at 25.0 °c is 4.48. what is the value of ka for hbro?
An example of kinetic energy continuously being changed to potential energy and back again might be -
f electric charges moving in a straight path
g a train moving down a track
h a plate sitting on the edge of a table
j a girl swinging on a swing
In an oxidation-reduction reaction, what happens to the electrons in the reduction process?
Answer:
Electrons will be gained
One liter of a buffer composed of 1.2 m hno2 and 0.8 m nano2 is mixed with 400 ml of 0.5 m naoh. what is the new ph? assume the pka of hno2 is 3.4.
The new pH of given solutionis [tex]\boxed{3.53}[/tex].
Further Explanation:
The aqueous solution of a weak acid and its conjugate base or a weak base and its conjugate acid is termed as buffer solution. These solutions offer strong resistance to any change in their pH on addition of small quantity of strong acid or base.
Henderson-Hasselbalch equation:
This equation helps in determining the pH of buffer solution. Its mathematical form is given as follows:
[tex]{\text{pH}} = {\text{p}}{K_{\text{a}}} + {\text{log}}\dfrac{{\left[ {{{\text{A}}^ - }} \right]}}{{\left[ {{\text{HA}}} \right]}}[/tex] …… (1)
Here,
[tex]\left[ {{{\text{A}}^ - }} \right][/tex] is concentration of conjugate base.
[HA] is concentration of acid.
Given mixture is a buffer solution of [tex]{\text{HN}}{{\text{O}}_{\text{2}}}[/tex] and [tex]{\text{NaN}}{{\text{O}}_{\text{2}}}[/tex]. Therefore Henderson-Hasselbalch equation becomes as follows:
[tex]{\text{pH}} = {\text{p}}{K_{\text{a}}} + {\text{log}}\dfrac{{\left[ {{\text{NaN}}{{\text{O}}_{\text{2}}}} \right]}}{{\left[ {{\text{HN}}{{\text{O}}_{\text{2}}}} \right]}}[/tex] …… (2)
Initial moles of [tex]{\text{HN}}{{\text{O}}_{\text{2}}}[/tex] can be calculated as follows:
[tex]\begin{aligned}{\text{Moles of HN}}{{\text{O}}_2} &= \left( {1.2{\text{ M}}} \right)\left( {{\text{1 L}}} \right)\\&= 1.2{\text{ mol}} \\\end{aligned}[/tex]
Initial moles of [tex]{\text{NaN}}{{\text{O}}_{\text{2}}}[/tex] can be calculated as follows:
[tex]\begin{aligned}{\text{Moles of NaN}}{{\text{O}}_{\text{2}}} &= \left( {0.8{\text{ M}}} \right)\left( {{\text{1 L}}} \right)\\&= 0.8{\text{ mol}} \\\end{aligned}[/tex]
Moles of NaOH can be calculated as follows:
[tex]\begin{aligned}{\text{Moles of NaOH}} &= \left( {0.5{\text{ M}}} \right)\left( {{\text{400 mL}}} \right)\left( {\frac{{{{10}^{ - 3}}{\text{ L}}}}{{1{\text{ mL}}}}} \right) \\&= 0.2{\text{ mol}} \\\end{aligned}[/tex]
When addition of 0.2 moles of NaOH is done to the buffer solution, 0.2 moles of [tex]{\text{HN}}{{\text{O}}_{\text{2}}}[/tex] is neutralized while the same amount of [tex]{\text{NaN}}{{\text{O}}_{\text{2}}}[/tex] is formed. Since volumes are additive, total volume can be calculated as follows:
[tex]\begin{aligned}{\text{Total volume of solution}} &= \left( {1 + \left( {400{\text{ mL}}} \right)\left( {\frac{{{{10}^{ - 3}}{\text{ L}}}}{{1{\text{ mL}}}}} \right)} \right){\text{ L}} \\ &= {\text{1}}{\text{.4 L}} \\\end{aligned}[/tex]
Therefore concentration of [tex]{\text{HN}}{{\text{O}}_{\text{2}}}[/tex] can be calculated as follows:
[tex]\begin{aligned}\left[ {{\text{HN}}{{\text{O}}_{\text{2}}}} \right] &= \frac{{\left( {1.2 - 0.2} \right){\text{ mol}}}}{{1.4{\text{ L}}}}\\&= 0.714{\text{ M}} \\\end{aligned}[/tex]
Therefore concentration of [tex]{\text{NaN}}{{\text{O}}_{\text{2}}}[/tex] can be calculated as follows:
[tex]\begin{aligned}\left[ {{\text{NaN}}{{\text{O}}_{\text{2}}}} \right] &= \frac{{\left( {1.2 + 0.2} \right){\text{ mol}}}}{{1.4{\text{ L}}}} \\ &= 1{\text{ M}} \\\end{aligned}[/tex]
Substitute 0.714 M for [tex]\left[ {{\text{HN}}{{\text{O}}_{\text{2}}}} \right][/tex], 1 M for [tex]\left[ {{\text{NaN}}{{\text{O}}_{\text{2}}}} \right][/tex] and 3.4 for [tex]{\text{p}}{K_{\text{a}}}[/tex] in equation (2).
[tex]\begin{aligned} {\text{pH}} &= 3.4 + {\text{log}}\left( {\frac{{{\text{1 M}}}}{{0.714{\text{ M}}}}} \right) \\&= 3.54 \\\end{aligned}[/tex]
Learn more:
The reason for the acidity of water https://brainly.com/question/1550328 Reason for the acidic and basic nature of amino acid. https://brainly.com/question/5050077Answer details:
Grade: High School
Subject: Chemistry
Chapter: Acid, base and salts
Keywords: pH, buffer, pKa, NaNO2, HNO2, 3.4, 1 M, 0.714 M, concentration, total volume of solution, 1.2 mol, 0.8 mol, 0.2 mol, 3.54.
What volume of a 0.25 m phosphoric acid solution is required to react completely with 1.0 l of 0.35 m sodium hydroxide?
A gas has a volume of 590 mL at a temperature of -55°C what volume will the gas occupy at 30°C
A sample of c3h8 has 4.56 Ã 1024 h atoms. how many carbon atoms does the sample contain?
describe the placement of the crucible lid on the crucible when heating the magnesium. Why is it important that this be done correctly?
Set the crucible's lid slightly off-center to allow air to enter while keeping the magnesium oxide from escaping.
What is a crucible lid?A crucible is a cup-shaped piece of laboratory equipment used to keep chemical compounds contained while they are heated to extremely high temperatures.
Crucibles come in a variety of sizes and are usually packaged with a crucible cover (or lid).
Keep the lid on the crucible while cooling to prevent moisture from the atmosphere from interacting with the anhydrous salt, especially if the lab is humid. As a result, the mass of water will be too low.
The most important apparatus because it will be used to obtain the final precipitate, which will tell us how much salt is in the solution.
The lid is used to cover the crucible so that the heated precipitates do not oxidize when they come into contact with air.
Thus, it is important that the lid should be kept correctly.
For more details regarding crucible lid, visit:
https://brainly.com/question/10237849
#SPJ2
what is the representative particle for silicon
Final Answer:
The representative particle for silicon is the silicon atom.
Explanation:
Silicon, a chemical element with the symbol Si and atomic number 14, is a metalloid commonly found in nature. The representative particle for silicon is the silicon atom, which serves as the fundamental building block of silicon-based materials. At its core, silicon has 14 protons and electrons, and its atomic mass is approximately 28.09 atomic mass units (amu). The electronic configuration of a silicon atom is 1s² 2s² 2p⁶ 3s² 3p², indicating the distribution of electrons in its various energy levels and orbitals.
Silicon's unique atomic structure contributes to its versatile properties, making it a crucial element in the field of electronics and semiconductor technology. The outermost electron shell of a silicon atom contains four electrons, allowing silicon to form covalent bonds with other atoms, particularly other silicon atoms.
This ability to form strong covalent bonds is essential for the creation of the crystalline structure that characterizes silicon in its solid state. Silicon's role as a semiconductor arises from its ability to conduct electricity under certain conditions, making it an integral component in the production of microchips and other electronic devices.
In summary, the silicon atom, with its specific atomic number, mass, and electron configuration, serves as the representative particle for silicon. Understanding the properties of the silicon atom is fundamental to grasping the unique characteristics that make silicon a cornerstone of modern technology.
A mole of silicon contains 6.02 × 10²³silicon atoms.
A representative particle is the smallest unit in which a substance naturally exists. For the majority of elements, the representative particle is the atom. Silicon (Si), with an atomic number of 14 and an atomic mass of 28.09, is no exception to this rule. Therefore, the representative particle for silicon is the atom. This means a mole of silicon contains 6.02 × 10²³ silicon atoms, as determined by Avogadro's number.
Using the periodic table, choose the more reactive metal. (hint: reactivity of Ga > Al: reactivity of Zn > Ga) Pt or Ag
Answer:
Silver (Ag) is more reactive than platinum (Pt) :) hope this helps!!!
Explanation:
Describe how the law of conservation of energy is demonstrated in this laboratory activity.
Law of conservation of energy can be evidenced by the total heat energy of reaction and mechanical energy of dynamic system. And the energy transfer into mass during a nuclear reaction.
What is law of conservation of mass?According to energy conservation law, energy can neither be created nor be destroyed. Therefore, the total energy in a system is conserved.
However, energy can be transformed from one form to the other such as conversion of electrical energy to chemical energy, electrical energy to mechanical energy etc.
The sum of kinetic energy and potential energy is called mechanical energy. If kinetic energy of a body increases, its potential energy decreases. Thus, total mechanical energy is constant.
This can be well explained by ,measuring the kinetic and potential energy of the a moving pendulum when it is at rest and on motion.
Similarly in chemical reactions, the total heat energy will be constant and if we take the nuclear reactions, where the energy of the product side and reactant side will be equal.
To find more about energy conservation, refer the link below:
https://brainly.com/question/2137260
#SPJ5
Which element is reduced in this reaction? 2cr(oh)3+3ocl−+4oh−→2cro4−2+3cl−+5h2o enter the chemical symbol of the element?
A solution has an initial concentration of 0.0100 m hclo (ka = 3.5×10−8 ) and 0.0300 m naclo. what is the ph after the addition of 0.0030 mol of solid naoh to 1.00 l of this solution? assume no volume change.
number of moles in 3.70 x 10^-1 g of boron
Answer:
0.0342 mol
Explanation:
The molar mass of boron is 10.81 g/mol, that is, 1 mole of boron (6.02 × 10²³ molecules of boron) has a mass of 10.81 grams. This is the ratio that we will use to find the number of moles in 3.70 × 10⁻¹ g, using a conversion fraction.
3.70 × 10⁻¹ g B × (1 mol B / 10.81 g B) = 0.0342 mol B
To find the number of moles in Boron, you divide the given mass by the molar mass of Boron. Given the mass of Boron as 3.70 x 10^-1 g and the molar mass as 10.8 g/mol, the result is approximately 0.034 moles.
Explanation:To find the number of moles in a sample, we use the formula: Moles = mass / molar mass. We already know the mass of boron, which is 3.70 x 10^-1 g. The average atomic mass of boron, considering its isotopes, is approximately 10.8 amu. Converting this into grams gives you 10.8 g/mol (since 1 amu = 1 g/mol).
Therefore, the number of moles of boron is calculated to be Moles = 3.70 x 10^-1 / 10.8 = approximately 0.034 moles.
Note that an atomic mass unit (amu) is basically the mass of one atom, on a scale where the carbon-12 atom is exactly 12.0 amu. However, no single boron atom weighs exactly 10.8 amu; 10.8 amu is the average mass of all boron atoms, considering the isotopes.
Learn more about moles of Boron here:https://brainly.com/question/10728903
#SPJ3
What mass of kbr (in grams) should you use to make 300.0 ml of a 1.50 m solution of kbr?
To prepare a 300.0 mL of a 1.50 M KBr solution, you need 53.55 grams of KBr, calculated by multiplying the required moles (0.450 moles) by the molar mass of KBr (119.00 g/mol).
Explanation:Calculating the Mass of KBr for a SolutionTo find the mass of KBr needed to make a 300.0 mL (0.300 L) of a 1.50 M solution, we apply the formula:
Molarity (M) = moles of solute / liters of solution
First, calculate the moles of KBr required:
Moles of KBr = Molarity × Volume in LitersMoles of KBr = 1.50 moles/L × 0.300 LMoles of KBr = 0.450 molesNext, convert moles to grams using the molar mass of KBr (119.00 g/mol):
Mass of KBr = Moles of KBr × Molar Mass of KBrMass of KBr = 0.450 moles × 119.00 g/molMass of KBr = 53.55 gramsTherefore, you would need 53.55 grams of KBr to make a 300.0 mL of a 1.50 M KBr solution.
A reaction in which a , b , and c react to form products is zero order in a , one-half order in b , and second order in
c. by what factor does the reaction rate change if [b] is doubled (and the other reactant concentrations are held constant)? -g
When the concentration of b is doubled in a chemical reaction that is zero order in a, one-half order in b, and second order in c, the reaction rate will increase by a factor of √2 (approximately 1.414), with other reactant concentrations held constant.
Explanation:The question you're asking relates to the rate of a chemical reaction and how it changes with varying concentrations of reactants. Specifically, there is a reaction where the rate is zero order in a, one-half order in b, and second order in c. According to the given reaction orders, the rate expression would be:
Rate = k [a]0[b]1/2[c]2
Since the reaction is zero order in a, changing the concentration of a does not affect the rate. However, since it is one-half order in b, if the concentration of b is doubled, the rate will increase by a factor of the square root of 2. This is because:
New Rate = k [a]0(2[b])1/2[c]2 = k [a]0[b]1/2 × √2 [c]2
= Rate × √2
Therefore, when the concentration of b is doubled, and a and c remain constant, the reaction rate will increase by a factor of √2 (approximately 1.414).
Learn more about Chemical Reaction Rates here:https://brainly.com/question/1971112
#SPJ3
In a chemical reaction, it is determined that the equilibrium constant is 0.213. Which of the following is a correct statement regarding this reaction?
There are more products than reactants at equilibrium.
The reaction will continue until no reactant remains.
There are more reactants than products at equilibrium.
The reaction has stopped completely.
Final answer:
The correct statement for a chemical reaction with an equilibrium constant of 0.213 is that there are more reactants than products at equilibrium.
Explanation:
Given that the equilibrium constant is 0.213 for a chemical reaction, we can make certain determinations about the state of the reaction at equilibrium. When the equilibrium constant (K) is less than 1, this generally means that the ratio of products to reactants at equilibrium is small and the reaction system favors the reactants. Therefore, the correct statement is that there are more reactants than products at equilibrium.
It is important to understand that when equilibrium is reached, the reaction has not stopped; rather, it is a dynamic state where the forward and reverse reactions continue at the same rate, maintaining constant concentrations of reactants and products. The idea that the reaction continues until no reactant remains is incorrect because a reaction at equilibrium does not favor complete conversion to products unless the equilibrium constant is significantly greater than 1.
In two or more complete sentences, explain the law of conservation of mass and how it relates to this experiment?
Answer:
The mass can not be neither created nor destroyed but transformed by chemical reactions or physical transformations in an isolated recipient.
Explanation:
Hello,
In case, no matter the carried out experiment, the law of conservation of mass always leads the same: the mass can not be neither created nor destroyed but transformed by chemical reactions or physical transformations in an isolated recipient.
In such a way, we must consider that any system closed to every form of transport of matter, will show a no change in its mass as time goes by, since the system's mass cannot change neither by additions nor withdrawals. Therefore, the quantity of mass is conserved over time.
Best regards.