Graph the equation by first finding the​ x- and​y-intercepts.

one half x plus one third y equals 1

Answer: 9.70%

Step-by-step explanation:

The formula to find the percentage error is given by :-

[tex]\%\text{ error}=\dfrac{|\text{Estimate-Actual}|}{\text{Actual}}\times100[/tex]

Given : Actual mass of zinc oxide used by pharmacist = 28.35 g

Estimated mass of zinc oxide used by pharmacist =31.1 g

Now, [tex]\%\text{ error}=\dfrac{|31.1-28.35|}{28.35}\times100[/tex]

i.e. [tex]\%\text{ error}=\dfrac{2.75}{28.35}\times100[/tex]

i.e. [tex]\%\text{ error}=9.70017636684\approx9.70\%[/tex]

Hence, the  percentage of error on the basis of the desired quantity.= 9.70%

Answer:

% increase =[tex]\frac{\text{ Increased number -Original number }}{\text{Original number}} \times 100\%[/tex]

% decrease =[tex]\frac{\text{ Original number - Decreased number }}{\text{Original number}} \times 100\%[/tex]

Step-by-step explanation:

Percentage Increase:

Let there be an original number. If it increased to a certain value we can calculate the percentage increase value with the help of following formula:

% increase =[tex]\frac{\text{ Increased number -Original number }}{\text{Original number}} \times 100\%[/tex]

Percentage Decrease:

Let there be an original number. If it decreases to a certain value we can calculate the percentage decrease with the help of following formula:

% decrease =[tex]\frac{\text{ Original number - Decreased number }}{\text{Original number}} \times 100\%[/tex]

Answer:

[tex]y=11,600x+6,000[/tex]

Yearly sales in 1990: $98,800.

Step-by-step explanation:

We have been given that the sales of a certain appliance dealer can be approximated by a straight line. Sales were $6000 in 1982 and $ 64,000 in 1987.

If at 1982, [tex]x=0[/tex] then at 1987 x will be 5.

Now, we have two points (0,6000) and (5,64000).

[tex]\text{Slope}=\frac{64,000-6,000}{5-0}[/tex]

[tex]\text{Slope}=\frac{58,000}{5}[/tex]

[tex]\text{Slope}=11,600[/tex]

Now, we will represent this information in slope-intercept form of equation.

[tex]y=mx+b[/tex], where,

m = Slope,

b = Initial value or y-intercept.

We have been given that at [tex]x=0[/tex], the value of y is 6,000, so it will be y-intercept.

Substitute values:

[tex]y=11,600x+6,000[/tex]

Therefore, the equation [tex]S=11,600x+6,000[/tex] represents yearly sales.

Now, we will find difference between 1990 and 1982.

[tex]1990-1982=8[/tex]

To find yearly sales in 1990, we will substitute [tex]x=8[/tex] in the equation.

[tex]S=11,600(8)+6,000[/tex]

[tex]S=92,800+6,000[/tex]

[tex]S=98,800[/tex]

Therefore, the yearly sales in 1990 would be $98,800.

Answer: Hi!, first, Z are the integer numbers, so we only will work with them.

P(x): x ≤ 0

ok, this predicate is true if x is less or equal tan 0, and false if x is greater than 0.

so P(x) is true if { x∈Z, x ≤ 0}

Q(x): x2 = 1

Q(x) is true only if 2*x = 1. now, this means that if x=1/2 is true, but 1/2 isnt an integer, then Q(x) is false ∀ x ∈ Z.

R(x): x is odd

R(x) is true if x is odd, we can write odd numbers as x = 2k + 1, where k is a random integer; then:

R(x) is true if x=2k +1, with k∈Z.

S(x): x = x + 1

S(x) is true if x= x+1, if we subtract x from both sides of the equality, we get that S(x) is true if 0=1, and this is absurd, then:

S(x) is false  ∀ x ∈ Z.

Answer:

There is a 33% probability that this party was received from supplier Z.

Step-by-step explanation:

This can be formulated as the following problem:

What is the probability of B happening, knowing that A has happened.

It can be calculated by the following formula

[tex]P = \frac{P(B).P(A/B)}{P(A)}[/tex]

Where P(B) is the probability of B happening, P(A/B) is the probability of A happening knowing that B happened and P(A) is the probability of A happening.

-In your problem, we have:

P(A) is the probability of a defective part being supplied. For this probability, we have:

[tex]P(A) = P_{1} + P_{2} + P_{3}[/tex]

In which [tex]P_{1}[/tex] is the probability that the defective product was chosen from supplier X(we have to consider the probability of supplier X being chosen). So:

[tex]P_{1} = 0.24*0.05 = 0.012[/tex]

[tex]P_{2}[/tex] is the probability that the defective product was chosen from supplier Y(we have to consider the probability of supplier Y being chosen). So:

[tex]P_{2} = 0.36*0.10 = 0.036[/tex]

[tex]P_{3}[/tex] is the probability that the defective product was chosen from supplier Z(we have to consider the probability of supplier Z being chosen). So:

[tex]P_{2} = 0.40*0.06 = 0.024[/tex]

So

[tex]P(A) = P_{1} + P_{2} + P_{3} = 0.012 + 0.036 + 0.024 = 0.072[/tex]

P(B) is the probability of the supplier chosen being Z, so P(B) = 0.4

P(A/B) is the probability of the part supplied being defective, knowing that the supplier chosen was Z. So P(A/B) = 0.06.

So, the probability that this part was received from supplier Z is:

[tex]P = \frac{0.4*0.06}{0.072} = 0.33[/tex]

There is a 33% probability that this party was received from supplier Z.

We have a vector [tex]\vec F[/tex] with a magnitude [tex]F[/tex] of 86.4 N.

a. Let [tex]\theta[/tex] be the angle [tex]\vec F[/tex] makes with the positive [tex]x[/tex]-axis. The [tex]x[/tex]-component of [tex]\vec F[/tex] is

[tex]F_x=(86.4\cos\theta)\,\mathrm N[/tex]

and has a magnitude of 72.3 N, so

[tex]72.3=86.4\cos\theta\implies\cos\theta=0.837\implies\theta=\boxed{33.2^\circ}[/tex]

b. The [tex]y[/tex]-component of [tex]\vec F[/tex] is

[tex]F_y=(86.4\cos33.2^\circ)\,\mathrm N=\boxed{47.3\,\mathrm N}[/tex]

a) The angle between the vector and the +x axis is approximately 33.196°.

b) The component of the force along the +y axis is approximately 47.304 newtons.

In this question we should apply the concepts of magnitude and direction of a vector to solve each part. The magnitude ([tex]\|\vec F\|[/tex]), in newtons, is a application of Pythagorean theorem and direction ([tex]\theta[/tex]), in degrees, is an application of trigonometric functions.

a) The angle between the vector and the component along the x axis ([tex]F_{x}[/tex]), in newtons, is found by means of the following expression:

[tex]\theta = \cos^{-1} \frac{F_{x}}{\|\vec F\|}[/tex] (1)

([tex]\|\vec F\| = 86.4\,N[/tex], [tex]F_{x} = 72.3\,N[/tex])

[tex]\theta = \cos^{-1} \left(\frac{72.3\,N}{86.4\,N} \right)[/tex]

[tex]\theta \approx 33.196^{\circ}[/tex]

The angle between the vector and the +x axis is approximately 33.196°. [tex]\blacksquare[/tex]

b) The magnitude of the +y component of the vector force ([tex]F_{y}[/tex]), in newtons, is determined by the following Pythagorean expression:

[tex]F_{y} = \sqrt{(\|\vec F\|)^{2}-F_{x}^{2}}[/tex] (2)

([tex]\|\vec F\| = 86.4\,N[/tex], [tex]F_{x} = 72.3\,N[/tex])

[tex]F_{y} = \sqrt{(86.4\,N)^{2}-(72.3\,N)^{2}}[/tex]

[tex]F_{y} \approx 47.304\,N[/tex]

The component of the force along the +y axis is approximately 47.304 newtons. [tex]\blacksquare[/tex]

To learn more on vectors, we kindly invite to check this verified question: https://brainly.com/question/13188123

Answer:

1. Nominal data 2. Responses here can't be classified as interval or nominal or ordinal data 3.  Responses here can't be classified as interval or nominal or ordinal data  4. nominal

Step-by-step explanation:

1. Heidi's favorite  brand of tenis balls is only a "label" in the set of brands that can be regarded. So, because we are dealing with names or "labels" we should classify responses here as nominal data.

2. Possible values for the number of cars in a parking lot are 0, 1, 2, 3, 4,... Besides we can say that 4 cars is twice than 2 cars, and exist a true zero. We can't say that responses here correspond to interval data, in fact, we can say that responses here correspond to the kind of data called ratio data.

3. You can spend zero hours in your homework, so, there exists an absolute zero, besides, to say that you spend 4 hours in your homework is twice that if you spend 2 hours in your homework is meaningful. We can't classify responses here as interval data or ordinal or nominal. We can classify responses here as ratio data.

4. There are only two different responses here, i.e., You are a US citizen or You are not a US citizen. We are dealing with "labels" again, and in general, we can't say there is a better response or stablish an order.

Final answer:

The correct classifications are: Heidi's favorite brand of tennis balls (Nominal), Number of cars in a parking lot (Nominal, with an explanation), Amount of time spent on homework per week (Interval), and Whether you are a US citizen (Nominal).

Explanation:

To determine whether the listed responses should be classified as interval, nominal, or ordinal data, it is essential to understand what each type of data signifies. Nominal data are categories without any order, ordinal data have a meaningful order or ranking but not necessarily consistent differences between rankings, and interval data have a consistent scale and order, but no true zero point.

Nominal: Heidi's favorite brand of tennis balls. This is a category (brand) without a numerical value or order.

Nominal: Number of cars in a parking lot. Although it involves numbers, it is essentially counting the frequency of an item, which falls under ratio data. However, as the question specifically asks among nominal, ordinal, and interval, the correct identification in this context is not provided.

Interval: Amount of time you spend per week on your homework. Time has a consistent scale and can be ordered, but there is no true zero time (you cannot have negative time).

Nominal: Whether you are a US citizen. This is a categorical variable with no inherent order.

Answer:

Step-by-step explanation:

We know that for two similar matrices [tex]A[/tex] and [tex]B[/tex] exists an invertible matrix [tex]P[/tex] for which

[tex][tex]B = P^{-1} AP[/tex][/tex]

∴ [tex]B^{T} = (P^{-1})^{T} A^{T} P^{T} \\[/tex]

Also [tex]P^{-1}P = I\\[/tex]

and [tex](P^{-1})^{T} = (P^{T})^{-1}[/tex]

∴[tex](P^{-1})^{T}P^{T} = I[/tex]

so, [tex]B^{T} = (P^{-1})^{T} A^{T} P^{T} = (P^{T})^{-1}A^{T} P^{T}\\B^{T} = A^{T} I\\B^{T} = A^{T}[/tex]

Answer:

  P = (-18 5/9, 3 13/18, -17 2/3)

Step-by-step explanation:

The given point must satisfy both the equation of the line and that of the plane. We can substitute for x, y, and z in the plane's equation to get ...

  -7(-3-8t) +2(-6+5t) +8(-6-6t) = -4

  21 +56t -12 +10t -48 -48t = -4

  18t -39 = -4 . . . collect terms

  18t = 35 . . . . . . add 39

  t = 35/18 . . . . . .divide by the coefficient of t

The point is ...

  (x, y, z) = (-3-8(35/18), -6+5(35/18), -6-6(35/18))

  P = (x, y, z) = (-18 5/9, 3 13/18, -17 2/3)

Answer:

The average rate of change is 2, letter a)

Step-by-step explanation:

Given a function y, the average rate of change S of y=f(x) in an interval  [tex][x_{s}, x_{f}][/tex] will be given by the following equation:

[tex]S = \frac{f(x_{f}) - f(x_s)}{x_{f} - x_{s}}[/tex].

In our problem, we have that:

[tex]f(x) = 2x + 7[/tex]

[tex]x_{s} = -1[/tex]

[tex]x_{f} = 0[/tex]

So:

[tex]f(x_{s}) = f(-1) = 2(-1) + 7 = -2 + 7 = 5[/tex]

[tex]f(x_{f}) = f(0) = 2(0) + 7 = 0 + 7 = 7[/tex]

The average rate of change is:

[tex]S = \frac{f(x_{f}) - f(x_s)}{x_{f} - x_{s}} = \frac{7-5}{0 -(-1)} = \frac{2}{1} = 1[/tex]

The average rate of change is 2, letter a)

Answer:

wala akong alam jun

Step-by-step explanation:

i hate math, mathuloggggggg ka, ayieee ?luh asa ka

To compute the total amount accumulated with compound interest and the interest earned, we utilize the formula for compound interest on the given principal amount, rate of interest, and the period. The interest earned is then computed by subtracting the initial principal amount from the total accumulated amount.

The subject of this question is the calculation of compound interest. Given that the principal amount is $4500, the rate of interest is 5%, and the interest is compounded quarterly over a course of 3 years, we first need to compute the total amount accumulated. Using the formula for compound interest:

A = P (1 + r/n)^(nt)

where:

A is the amount of money accumulated after n years, including interest.

P is the principal amount (the initial amount of money).

r is the annual interest rate (in decimal).

n is the number of times that interest is compounded per year.

t is the number of years the money is invested for.

In this case, P = 4500, r = 0.05 (5% expressed as a decimal), n = 4 (since interest is compounded quarterly), and t = 3. Substituting these values into the formula, we get the total accumulated amount.

The interest earned can subsequently be found by subtracting the original principal amount (P) from the accumulated amount (A).

https://brainly.com/question/14295570

#SPJ3

Answer:

[tex]I=\frac{1000}{exp^{0,806725*t-0.6906755}+1}[/tex]

Step-by-step explanation:

The rate of infection is jointly proportional to the number of infected troopers and the number of non-infected ones. It can be expressed as follows:

[tex]\frac{dI}{dt}=a*I*(1000-I)[/tex]

Rearranging and integrating

[tex]\frac{dI}{dt}=a*I*(1000-I)\\\\\frac{dI}{I*(1000-I)}=a*dt\\\\\int\frac{dI}{I*(1000-I)}=\int a*dt\\\\-\frac{ln(1000/I-1)}{1000}+C=a*t[/tex]

At the initial breakout (t=0) there was one trooper infected (I=1)

[tex]-\frac{ln(1000/1-1)}{1000}+C=0\\\\-0,006906755+C=0\\\\C=0,006906755[/tex]

In two days (t=2) there were 5 troopers infected

[tex]-\frac{ln(1000/5-1)}{1000}+0,006906755=a*2\\\\-0,005293305+0,006906755=2*a\\a = 0,00161345 / 2 = 0,000806725[/tex]

Rearranging, we can model the number of infected troops (I) as

[tex]-\frac{ln(1000/I-1)}{1000}+0,006906755=0,000806725*t\\\\-\frac{ln(1000/I-1)}{1000}=0,000806725*t-0,006906755\\-ln(1000/I-1)=0,806725*t-0.6906755\\\\\frac{1000}{I}-1=exp^{0,806725*t-0.6906755}  \\\\\frac{1000}{I}=exp^{0,806725*t-0.6906755}+1\\\\I=\frac{1000}{exp^{0,806725*t-0.6906755}+1}[/tex]

Answer:

5.5 liters

Step-by-step explanation: there are 1000 milliliters in a liter, so divide 5,500/1000

Answer:

5.5 liters

Step-by-step explanation:

because 5500 millilitres is 5.5 liters

Answer:

2295, 2286, 2277, 2268, 2259

Step-by-step explanation:

We are dealing with a number of 4 digits, whose first two digits are 2's. So the number looks like [tex]2~2~ d_2 ~d_1[/tex] (where the last 2 digits are to be determined).

The exercise says that the sum of the ones and tens digits is 14. The ones digit is the last digit (the right most digit, which we are denoting by [tex]d_1[/tex]), and the tens digit is the second right most digit (which we are denoting by [tex] d_2[/tex]). So [tex] d_1+d_2=14[/tex]

Since they're digits, their only possible values are 0,1,2,3,4,5,6,7,8,9.

If d1 was 0, d2 would have to be 14 (since they should add up to 14), which is impossible.

If d1 was 1, d2 would have to be 13 (since they should add up to 14), which is impossible.

If d1 was 2, d2 would have to be 12, which is impossible.

And so going through all possibilities, we get that the only possible ones are:

[tex] d1=5~ and~ d_2=9[/tex]

[tex] d1=6~ and~ d_2=8[/tex]

[tex] d1=7~ and~ d_2=7[/tex]

[tex] d1=8~ and~ d_2=6[/tex]

[tex] d1=9~ and~ d_2=5[/tex]

And so the possible 4-digits numbers are 2295, 2286, 2277, 2268, 2259.

Answer:  35

Step-by-step explanation:

Given : A bag contains four red marbles, two green ones, one lavender one, three yellows, and one orange marble.

Total = 4+2+1+3+1=11

To find sets of four marbles include none of the red ones, we need to exclude red marbles when we count the total number of marbles.

Then, the total marbles(exclude red) =11-4=7

Now, the combination of 7 marbles taking 4 at a time is given by :-

[tex]^7C_4=\dfrac{7!}{4!(7-4)!}=\dfrac{7\times6\times5\times4!}{4!3!}=35[/tex]

Hence, the number of sets of four marbles include none of the red ones = 35

Answer:

[tex]x=\frac{45}{4},  y=-\frac{201}{4}, z=-\frac{61}{2}[/tex]

Step-by-step explanation:

We start by putting our equation in a matricial form:

[tex]\left[\begin{array}{cccc}12&2&1&4\\3&3&-4&5\\2&-2&4&1\end{array}\right][/tex]

Then, we multiply the second row by 4 and substract the first row:

[tex]\left[\begin{array}{cccc}12&2&1&4\\0&10&-17&16\\2&-2&4&1\end{array}\right][/tex]

Now, multiply the third row by 6 and substract the first row:

[tex]\left[\begin{array}{cccc}12&2&1&4\\0&10&-17&16\\0&-14&23&2\end{array}\right][/tex]

Next, we will add [tex]\frac{7}{5}[/tex] times the second row to the third row:

[tex]\left[\begin{array}{cccc}12&2&1&4\\0&10&-17&16\\0&0&\frac{-4}{5}&\frac{122}{5}\end{array}\right][/tex]

Now we can solve [tex]\frac{-4}{5} z=\frac{122}{5}[/tex] to obtain

[tex]z=-\frac{61}{2}[/tex]

Then [tex]10y-17\frac{-61}{2}=16[/tex] wich implies that

[tex]y=\frac{16-\frac{17*61}{2}}{10} =\frac{\frac{32-17*61}{2}}{10}=\frac{-1005}{20}=\frac{-201}{4}[/tex]

Finally

[tex]x=\frac{4-2*\frac{-201}{4}+\frac{61}{2}}{12} =\frac{\frac{8+201+61}{2}}{12}=\frac{270}{24}=\frac{135}{12}=\frac{45}{4}[/tex].

[tex]z=-\frac{61}{2}\\ y=-\frac{201}{4} \\x=\frac{45}{4}[/tex]

Answer:

Dependent variable: number of correct answers

Step-by-step explanation:

The dependent variable is the number of correct answers, because it is the variable that the researchers were recording as response in the experiment.

As it is a counting, it can only take finite values (0 correct answers, 1 correct answer, 2 correct answers and so on). Then, it can be classified as a discrete variable. Discrete values always represent exact quantities that can be counted. For example, number of passengers per car, or number of cows per acre.  

Discrete variables can be divided into nominal (they haven’t an order or a hierarchy, as in the example of cows/acre), ordinal (they follow a natural order or hierarchy), interval (they can be divided into classes) or ratio (they represent relative quantities).  

The number of correct answers is an ordinal variable, because they have a natural hierarchy. 1 correct answer it’ s better than 0, and 2 corrects answers are better than 1 and 0. Then, you can order your results: 0, 1, 2, 3, 4, etc.

Answer: The value of 100 th term is 298 and the value of n th term is 1+3n.

Step-by-step explanation:

Since we have given that

1,4,7,10............

Since it forms an A.P. in which

a = 1

d = [tex]4-1 =3[/tex]

So, the value of 100 th term is given by

[tex]a_{100}=a+(n-1)d\\\\a_{100}=1+(100-1)\times 3\\\\a_{100}=1+99\times 3\\\\a_{100}=1+297\\\\a_{100}=298[/tex]

And the value of n th term is given by

[tex]a_n=1+3n[/tex]

Hence, the value of 100 th term is 298 and the value of n th term is 1+3n.

Answer:  3600 seconds

Step-by-step explanation:

Use the following conversions: 1 hour = 60 minutes & 1 minute = 60 seconds

[tex]1\ hour \times \dfrac{60\ minutes}{1\ hour}\times \dfrac{60\ seconds}{1\ minute}\quad =\large\boxed{3600\ seconds}[/tex]

Step-by-step explanation:

To prove this we can use the definition of a sequence converging to its limit, in terms of epsilon:

The sequence [tex] \{ S_n\}[/tex] converges to [tex]L[/tex]

if and only if

for every [tex]\epsilon >0[/tex] there exists [tex]n_0\in \mathbb{N}[/tex] such that

[tex] n>n_0 \implies |S_n-L|<\epsilon[/tex]

if and only if

for every [tex]\epsilon >0[/tex] there exists [tex]n_0\in \mathbb{N}[/tex] such that [tex] n>n_0 \implies |(S_n-L) - 0|<\epsilon[/tex]

if and only if

the sequence [tex]\{S_n-L\}[/tex] converges to 0.

Answer:

Step-by-step explanation:

In step 2, the result of eliminating parentheses is shown. That is done by using the distributive property to multiply -2 by each of the terms inside parentheses, giving ...

  (-2)(x) +(-2)(12) = -2x -24

In step 3, 2x is added to both sides of the equation. This eliminates the -2x term on the right, and increases the -6x term on the left to -4x.

In step 4, the equation is divided by -4. This makes the coefficient of x become 1.

The equation -6x = -2(x + 12) can be solved by distributing -2 to elements inside the bracket, re-writing the equation, simplifying it, and then finally solving for 'x', leading to x = 6.

The equation shared is a linear equation in one variable, -6x = -2(x + 12). There are main steps to solving this equation:

So, for this equation -6x = -2(x + 12), the solution is x = 6.

https://brainly.com/question/18322830

#SPJ2

Answer: a) [tex]N(t) = 10^3\exp(0.046\frac{1}{min}t)[/tex]

b) 1,000,000 bacteria at t = 150 min

Step-by-step explanation:

Hi!!

A colony that grows exponentially has a number of bacteria:

[tex]N(t) = N_0 \exp(\lambda t)[/tex]

In this case at time t = 0:

[tex]N(0)=N_0=10^3[/tex]

We need to find the value of λ. We use the data:

[tex]N(t=50\;min)10^4 = 10^3\exp(\lambda \;50\;min)[/tex]

[tex]ln(10)=2.3=\lambda\;50\;min\\\lambda= \frac{0.046}{min}\\N(t) = 10^3\exp(\frac{0.046}{min}t)\\[/tex]

To find when there will be 1,000,000 bacteria:

[tex]10^6=10^3\exp(\frac{0.046}{min}t)[/tex]

[tex]\ln(10^3)=3\ln(10) = \frac{0.046}{min}t[/tex]

[tex]t = 150\;min [/tex]

Step-by-step explanation:

The proof can be done by contradiction. Suppose both a, and b weren't even. So that a, and b are both odd. This means they both look like

[tex]a=2k+1,~~b=2l+1[/tex] (for some integers k and l)

So, let's compute what [tex]a^2-3b^2[/tex] would be in this case:

[tex]a^2-3b^2=(2k+1)^2-3(2l+1)^2=4k^2+4k+1-3(4l^2+4l+1)[/tex]

[tex]= 4k^2+4k+1-12l^2-12l-3=4k^2+4k-12l^2-12l-2 [/tex]

[tex]=4(k^2+k+3l^2-3l)-2[/tex]

which notice wouldn't be divisible by 4. This shows then that since [tex]a^2-3b^2[/tex] is divisible by 4, at least one of the integers a and b is even.

Step-by-step explanation:

We have 3 given inputs namely P, Q, R and we have to draw a logic circuit which will give the output 1 if , and only if, P and Q have the same value and Q and R have opposite values.

So, first of all we make a truth table for this

P        Q        R        Output(Y)

0        0        0           0

0        0         1           1

0         1        0           0

0         1         1           0

1         0        0          0

1          0        1           0

1          1        0           1

1          1         1           0    

From the truth table we can see that the output, Y can be given by

[tex]Y=\bar{P}\bar{Q}R+PQ\bar{R}[/tex]

So, the logic circuit for the given logic equation can be drawn as shown fig.                  

To design a logic circuit that outputs a 1 if, and only if, P and Q have the same value and Q and R have opposite values, use XOR and AND gates in a specific configuration.

To design a logic circuit that outputs a 1 if, and only if, P and Q have the same value and Q and R have opposite values, we can use logic gates. Here's the step-by-step design:

Thus, the logic circuit will output a 1 if, and only if, P and Q have the same value and Q and R have opposite values.

https://brainly.com/question/33346752

#SPJ3

Answer: This represents a function

Step-by-step explanation: In this problem, we are given a relation in the form of a mapping diagram and we are asked if it represents a function. The easiest way to do this problem is to first translate the mapping diagram into a list of ordered pairs.

(6,-2) (-2,2) (4,1) (-1,1)

Now to determine if the relation is a function, we can simply look at the x coordinates of each ordered pair. Notice that all of them are different so the relation must be a function. It's important to understand that even though two of the Y coordinates are the same, this relation is still a function because the y coordinates do not have any effect on whether or not the relation is a function.

Answer:

5.9%.

Step-by-step explanation:

We are asked to find the simple interest rate for an amount of $1900 which earned simple interest of $56.28 in 6 months.

We will use simple interest formula to solve our given problem.

[tex]I=Prt[/tex], where,

[tex]I=\text{Amount of interest}[/tex]

P = Principal amount,

r = Interest rate in decimal form,

t = Time in years.

6 months equals 1/2 (0.5) year.

Substituting given values:

[tex]\$56.28=\$1900\cdot r\cdot 0.5[/tex]

[tex]\$56.28=\$950\cdot r[/tex]

[tex]\frac{\$56.28}{\$950}=\frac{\$950\cdot r}{\$950}[/tex]

[tex]0.059242=r[/tex]

Switch sides:

[tex]r=0.059242[/tex]

Convert in percentage:

[tex]0.059242\times 100\%[/tex]

[tex]5.9242\%\approx 5.9\%[/tex]

Therefore, the simple interest rate is approximately 5.9%.

To calculate the simple interest rate, the given values are substituted into the formula for simple interest, which is then re-arranged to solve for the interest rate.

To calculate the simple interest rate, you can use the simple interest formula: I = Prt where I is the interest earned, P is the principal amount (the initial amount of money), r is the rate of interest and t is time.

In this context, you earned $56.28 in 6 months from an initial amount of $1900. Re-arranging the formula to solve for r (the interest rate) we get: r = I / (Pt).

Substituting the given values into the formula, we find: r = $56.28 / ($1900 * 0.5). Carry out the calculations and multiply the result by 100 to get the percentage. This will yield your simple interest rate.

https://brainly.com/question/22621039

#SPJ3

Answer: There are 52223.18 AIDS death in 1995.

Step-by-step explanation:

Since we have given that

Number of AIDS deaths in 2003 = 18,017

Percentage of deaths of 1995 AIDS deaths =34.5%

Let the number of AIDS deaths in 1995 be 'x'.

According to question, it becomes ,

[tex]\dfrac{34.5}{100}\times x=18017\\\\x=18017\times \dfrac{100}{34.5}\\\\x=52223.18[/tex]

Hence, there are 52223.18 AIDS death in 1995.

Answer:

[tex]f(x) = x +\frac{1}{3}x^{3}+....[/tex]

Step-by-step explanation:

As per the question,

let us consider f(x) = tan(x).

We know that The Maclaurin series is given by:

[tex]f(x) = f(0) + \frac{f^{'}(0)}{1!}\cdot x+ \frac{f^{''}(0)}{2!}\cdot x^{2}+\frac{f^{'''}(0)}{3!}\cdot x^{3}+......[/tex]

So, differentiate the given function 3 times in order to find f'(x), f''(x) and f'''(x).

Therefore,

f'(x) = sec²x

f''(x) = 2 × sec(x) × sec(x)tan(x)

      = 2 × sec²(x) × tan(x)

f'''(x) = 2 × 2 sec²(x) tan(x) tan(x) + 2 sec²(x) × sec²(x)

       = 4sec²(x) tan²(x) + 2sec⁴(x)

       = 6 sec⁴x - 4 sec² x

We then substitute x with 0, and find the values

f(0) = tan 0 = 0

f'(0) =  sec²0 = 1

f''(0) = 2 × sec²(0) × tan(0) = 0

f'''(0) = 6 sec⁴0- 4 sec² 0 = 2

By putting all the values in the Maclaurin series, we get

[tex]f(x) = f(0) + \frac{f^{'}(0)}{1!}\cdot x+ \frac{f^{''}(0)}{2!}\cdot x^{2}+\frac{f^{'''}(0)}{3!}\cdot x^{3}+......[/tex]

[tex]f(x) = 0 + \frac{1}{1}\cdot x+ \frac{0}{2}\cdot x^{2}+\frac{2}{6}\cdot x^{3}+......[/tex]

[tex]f(x) = x +\frac{1}{3}x^{3}+....[/tex]

Therefore, the expansion of tan x at x = 0 is

[tex]f(x) = x +\frac{1}{3}x^{3}+....[/tex].

Answer:

d. 0.0213

Step-by-step explanation:

If a variable follow a poisson distribution, the probability that x events happens in a specific time is given by:

[tex]P(x)=\frac{e^{-a}*a^{x} }{x!}[/tex]

Where a is the mean number of events that happens in a specific time.

So, in this case, x is equal to 9 arrivals and a is equal to 16 customers per hour. Replacing this values, the probability is:

[tex]P(9)=\frac{e^{-16}*16^{9} }{9!}[/tex]

[tex]P(9)=0.0213[/tex]

Answer:

The means for times for the first round of the 100 meter men’s swim is 52.64789 seconds

The satandar deviation for times for the first round of the 100 meter men’s swim is 7.60182 seconds

Step-by-step explanation:

The sample mean for a set of n data is given by:

[tex]\bar X = \frac{1}{n}\sum{x_i}[/tex]

In other words, the sample mean of the times for 71 times of the first round measured in seconds is:

[tex]\bar X = \frac{1}{71}\sum{x_i} = 52.64789[/tex] seconds

The sample standard deviation for a set of n data is given by:

[tex]S = \sqrt{\frac{1}{n-1}\sum{(x_i - \bar x)^2}}[/tex]

In other words, the sample standard deviation of the times for 71 times of the first round measured in seconds is:

[tex]S = \sqrt{\frac{1}{n-1}\sum{(x_i - \bar x)^2}} = 7.60182[/tex] seconds