Answer:
Empirical formula: CH₃O
Empirical formula mass = 31 g/mol
Explanation:
Data Given:
Molecular Formula = C₁₀H₃₀O₁₀
Empirical Formula = ?
Empirical Formula mass =
Solution
Empirical Formula:
Empirical formula is the simplest ration of atoms in the molecule but not all numbers of atoms in a compound.
So,
The ratio of the molecular formula should be divided by whole number to get the simplest ratio of molecule
As
C₁₀H₃₀O₁₀ Consist of 10 Carbon (C) atoms, 30 Hydrogen (H) atoms, and 10 Oxygen (O) atoms.
Now
Look at the ratio of these three atoms in the compound
C : H : O
10 : 30 : 10
Divide the ratio by two to get simplest ratio
C : H : O
10/10 : 30/10 : 10/10
1 : 3 : 1
So for the empirical formula the simplest ratio of carbon to hydrogen to oxygen is 1:3:1
So the empirical formula will be
Empirical formula of C₁₀H₃₀O₁₀ = CH₃O
Now
To find the empirical formula mass in g/mol
Formula mass:
Formula mass is the total sum of the atomic masses of all the atoms present in a formula unit.
**Note:
if we represent the molar mass of the empirical formula for one mol in grams then it is written as g/mol
So,
As the empirical formula of C₁₀H₃₀O₁₀ is CH₃O
Then Its empirical formula mass will be
CH₃O
Atomic Mass of C = 12
Atomic Mass of H = 3
Atomic Mass of O = 16
Total Molar mass of CH₃O
CH₃O = 12 + 3(1) + 16
CH₃O = 12 + 3 + 16
CH₃O = 31 g/mol
The empirical formula for C10H30O10 is C5H15O5 with an empirical formula mass of 151.15 g/mol.
Empirical formula: The empirical formula for C10H30O10 is C5H15O5.
Empirical formula mass: The empirical formula mass can be calculated by summing the atomic masses of the elements in the empirical formula: C = 12.01 g/mol, H = 1.008 g/mol, O = 16.00 g/mol. Therefore, the empirical formula mass is (5*12.01) + (15*1.008) + (5*16.00) = 151.15 g/mol.
What’s the element?
How many reactants in each?
How many products in each?
Is it balanced?
You may find bellow the answers and the balanced chemical reactions.
Explanation:
2) The chemical reaction is:
2 Na + I₂ → 2 NaI
Na - sodium
I - iodine
In this reaction there are 2 reactants and 1 product.
The reaction is balanced.
3) The chemical reaction is:
N₂ + O₂ → 2 N₂O
N - nitrogen
O - oxygen
In this reaction there are 2 reactants and 1 product.
The reaction is not balanced, the balanced reaction is:
2 N₂ + O₂ → 2 N₂O
4) The chemical reaction is:
N₂ + 3 H₂ → 2 NH₃
N - nitrogen
H - hydrogen
In this reaction there are 2 reactants and 1 product.
The reaction is balanced.
5) The chemical reaction is:
2 KI + Cl₂ → 2 KCl + I₂
K - potassium
I - iodine
Cl - chlorine
In this reaction there are 2 reactants and 2 products.
The reaction is balanced.
Learn more about:
balanced chemical reactions
https://brainly.com/question/8886561
#learnwithBrainly
What NaCl concentration results when 309 ml of a 0.690 m NaCl solution is mixed with 467 ml of a 0.330 m NaCl solution?
Answer:
The resulting NaCl solution has a concentration of 0.4732 M
Explanation:
Concentration is the ratio of amount of solute present in a solution to the amount of solvent or total solution. Morality is the commonly used unit of concentration.
[tex]Concentration=\frac{(\text{Moles of solute})}{(\text{Volume of solution})}[/tex]
Since we are given with same NaCl solution, we have
[tex]\frac{(M_1 V_1+M_2 V_2)}{(V_1+V_2 ) }[/tex]....................(1)
Where
[tex]M_1= 0.690 m[/tex]
[tex]V_1= 309 ml[/tex]
[tex]M_2= 0.330 m[/tex]
[tex]V_2= 467 ml[/tex]
Now substituting the values in equation in (1)
=>[tex]\frac{( (0.690\times 309 )+(0.330\times 467))}{(309+467) }[/tex]
=>[tex]\frac{ (213.21\times 154.11)}{776}[/tex]
=>[tex]\frac{367.32}{776}[/tex]
=>0.4732 M
The resulting concentration when 309 ml of a 0.690 m NaCl solution is mixed with 467 ml of a 0.330 m NaCl solution is 0.473 M.
Explanation:To find out the resulting concentration of NaCl when two solutions of different concentrations and volumes are mixed, we need to determine the total amount of NaCl and the total volume of the solution. The mole of NaCl in a solution can be determined by multiplying the molarity of the solution by its volume.
For the first solution, the number of moles of NaCl = volume (L) × molarity (M) = 0.309 L × 0.690 mol/L = 0.2133 mol
For the second solution, the number of moles of NaCl = volume (L) × molarity (M) = 0.467 L × 0.330 mol/L = 0.154 mol
The total moles of NaCl = 0.2133 mol + 0.154 mol = 0.367 mol
The total volume = volume of first solution + volume of second solution = 0.309 L + 0.467 L = 0.776 L
Finally, the resulting concentration = total moles / total volume = 0.367 mol / 0.776 L = 0.473 M
Learn more about Molarity here:https://brainly.com/question/8732513
#SPJ3
What is the amount of heat absorbed when the temperature of 75 grams of water increases from 20.°C to 35°C
Answer:
4.704625 kJ (or 4704.625 J) is the amount of heat absorbed when the temperature of 75 grams of water increases from 20.°C to 35°C.
Explanation:
The measurement and calculation of the amounts of heat exchanged by a body or system is called calorimetry.
In this way, there is a direct proportionality relationship between heat and temperature. The constant of proportionality depends on the substance that constitutes the body as its mass, and the product of specific heat is produced by the body's mass. So, the equation that allows to calculate heat exchanges is:
Q = c * m * T
Where Q is the heat exchanged for a body of mass m, constituted by a specific heat substance c and where T is the temperature variation.
In this case:
The specific heat capacity (c) of water is 4,181 J / g°Cm=75 g T=35°C - 20°C ⇒ T= 15°CThen:
[tex]Q= 4.181 \frac{J}{g C} * 75 g *15 C[/tex]
Q≅4704.625 J
Being 1 kJ = 1000 J:
Q=4.704625 kJ
Finally, 4.704625 kJ (or 4704.625 J) is the amount of heat absorbed when the temperature of 75 grams of water increases from 20.°C to 35°C
When the temperature of 75 grams of water increases from 20 °C to 35 °C, the heat absorbed is 1125 calories, calculated using the specific heat formula (q = mcΔT).
Explanation:The question asks about the amount of heat absorbed when the temperature of a certain amount of water increases. We can calculate this using the specific heat formula: q = mcΔT, where 'q' is the heat absorbed, 'm' is the mass of the water, 'c' is the specific heat of water, and 'ΔT' is the change in temperature.
Given: m = 75 g (mass of water), c = 1.00 cal/g °C (specific heat of water), and ΔT = 35°C - 20°C = 15°C (change in temperature).
Plugging these values into the formula gives: q = (75 g) x (1.00 cal/g °C) x (15°C) = 1125 cal.
So, when the temperature of 75 grams of water increases from 20°C to 35°C, it absorbs 1125 calories of heat.
Learn more about Heat Absorption here:https://brainly.com/question/12943685
#SPJ11
Standard conditions of temperature and pressure for a thermochemical equation are____.
Final answer:
STP for thermochemical equations is 273.15 K and 1 bar, previously it was 1 atm. It serves as a reference for reporting thermodynamic properties.
Explanation:
The standard conditions of temperature and pressure (STP) for a thermochemical equation are defined as a temperature of 273.15 K (0°C) and a pressure of 1 bar (100 kPa). It is important to note that previously, the old definition used a standard pressure of 1 atm. Under these conditions, we can calculate properties of gases and thermochemical data such as enthalpies of formation. For species in solution, the standard condition is a concentration of 1 Molar (1 mol/L). Pure substances are considered in their most stable form at 1 atm and at the standard temperature, unless otherwise noted in a specific text.
Significance of STP in Thermochemical Equations
The significance of STP in thermochemical equations lies in its use as a benchmark for reporting the thermodynamic properties of substances. This consistent baseline allows for the comparison and understanding of data, such as enthalpies of formation, which are essential for studying chemical reactions and processes.
The answer is option A - 0°C and 101 kPa. Standard conditions of temperature and pressure for a thermochemical equation are 0°C and 101 kPa.
Standard conditions of temperature and pressure (STP) for thermochemical equations are 0°C and 101 kPa, equating to 0°C (273.15 K) and 1 bar (100 kPa). This set of conditions is referred to as standard temperature and pressure (STP), which is defined as 0°C (273.15 K) and 1 bar (100 kPa). However, it's important to note that there have been different definitions over time, with an older definition using 1 atm (101.325 kPa) instead. For most thermochemical data and calculations, STP is used as a reference point to enable comparisons of the properties of different gases.
The question is:
Standard conditions of temperature and pressure for a thermochemical equation are _____.
A. 0°C and 101 kPa.
B. 25°C and 101 kPa.
C. 0°C and 0 kPa.
D. 25°C and 22.4 kPa.
Why is density a physical property but volume isn’t?
Answer:
Density is a physical property but volume isn’t because density is intensive property but volume is extensive property.
Explanation:
EXTENSIVE PROPERTY- A property of matter like volume and mass which depends on the amount of being measured is called extensive property.
INTENSIVE PROPERTY- A property of matter like colour and density which does not depend on the amount of the substance present is called intensive property.
even though new models were discovered after dalton created his created his five principles, which of these principles still holds true?
Answer:
The explanation is given below
Explanation:
Dalton was the first who putted forward the theory about atom. he describe the properties of atoms of the element. Dalton based his theory on the law of conservation of mass and the law of constant composition.
His theory has 5 basic postulates and these five principals are still true.
1. Dalton stated that all matter composed of atoms are very small in size. these smallest unit of matter (atom) take part in chemical reaction.
2. All the atoms of an element are similar in shape, size, and other properties but different from the atoms of other element.
3. This theory states all matter is made up of atoms and atom can not be created nor destroy.
4. Law of constant composition:
According to this: atoms of different elements combine in a simple, fixed and whole number ratio to form compound.
5. Atoms the element can combine in more than one ratio and form two or more compounds.
The atomic theory of Dalton explained many things.
Other models are its modification and explanation. Dalton was the first who recognize difference between atom of an element compound.
Although there are some discrepancies to explain other points but these 5 points are still workable and true.
The principle that still holds true from Dalton's atomic theory is the law of conservation of matter.
Explanation:Even though new models were discovered after Dalton created his five principles, one principle that still holds true is the idea that atoms are neither created nor destroyed during a chemical change, which is known as the law of conservation of matter. This means that the total mass of matter present in a chemical reaction remains constant.
Learn more about Law of Conservation of Matter here:https://brainly.com/question/33504384
#SPJ3
PPLLLZZZ HHEEEELLLPPPP
Answer:
B) Cell Membrane
Explanation:
A) Chloroplasts are NOT in all cells, A is incorrect
C) Centrioles are for cell division, C is not correct
D) Cell walls are NOT in all cells, D is not correct
B) the cell membrane is responsible for materials traveling into and out of the cells to maintain homeostasis
4. I'm the "brain" of the cell or so they say. I regulate activities from day to day...
Answer:
nucleus
Explanation:
it holds information needed to regulate most of the cell functions
The 'brain' of the cell is the nucleus, which regulates cell activities by managing genetic material and essential functions like growth and protein synthesis. It ensures the proper functioning of the cell, similar to the role of the human brain, which controls both mental and physical processes.
The "brain" of the cell is commonly referred to as the nucleus. Like the human brain, which is the control center of the body, the nucleus regulates the activities of the cell. It holds the cell's genetic material and is responsible for managing activities such as growth, metabolism, protein synthesis, and cell division.
The human brain, on the other hand, controls mental processes such as reasoning, imagination, memory, and language as well as physical processes like breathing and heartbeat. Both the nucleus and the human brain are essential for the proper functioning of their respective systems.
A typical day in the life of a cell involves the nucleus sending instructions for protein synthesis, which are necessary for the cell to carry out specific functions. Without the nucleus, a cell would not be able to operate efficiently, just as without the human brain, a body could not function.
Suppose you held a lighted match to a solid hunk of wood and another match to a pile of wood shavings. Which form of wood will catch fire more easily?
Answer:
wood shaving
Explanation:
fire would spread faster
hope that helps
Answer:
The pile of wood will catch fire more easily because the shavings of wood will be heated faster as compared to the hunk of wood.
Explanation:
The reasons for wood shaving will be burnt faster than hunk of wood are:
The wood shavings are the small peeled pieces of wood that absorb heat much faster to reach ignition temperature. The wood shavings have a surface area lower than the wooden hunk, which makes it a lot easier for them to catch fire and spread. The combustion reaction takes place during the burning of wood. The larger the surface area, the more will be the oxygen molecules required to collide with the surface, thus, the wooden log will be burnt lately than wooden shavings.Therefore, the wood shavings will be burnt faster than the hunk of wood because of the smaller surface area and the combustion reaction will be faster than hunk of wood.
For Further Reference:
https://brainly.in/question/7404103
What happens to the sun's energy when it hits clouds, ice, and snow?
It is mostly reflected.
O It is all absorbed.
It dissipates.
It transfers heat by conduction.
Answer: its mostly reflected.
What’s the ph of a 6.7*10^-5 m H+ solution
Answer:
Ph= -log10[H+}
Explanation:
Ph+ -log 10(6.7*10-5)≅ 4
Answer:
4.17
Explanation:
A - ethene
B - oxygen
C - carbon dioxide
D - water
Answer:
ethene is a limiting reagent here
How many atoms are in 4.6 mol K?
Answer:
27.7 × 10²³ atoms
Explanation:
Given data:
Number of moles of Potassium = 4.6 mol
Number of atoms = ?
Solution:
The given problem will solve by using Avogadro number.
It is the number of atoms , ions and molecules in one gram atom of element, one gram molecules of compound and one gram ions of a substance.
The number 6.022 × 10²³ is called Avogadro number.
For example,
18 g of water = 1 mole = 6.022 × 10²³ molecules of water
1.008 g of hydrogen = 1 mole = 6.022 × 10²³ atoms of hydrogen
For 4.6 moles of K:
One mole = 6.022 × 10²³ atoms
4.6 mol × 6.022 × 10²³ atoms= 27.7 × 10²³ atoms
The number of
is different for each element and is known as the
number,
Answer:
Electrons, Atomic Number
Explanation:
The total number of electrons is different for each and every element of the periodic table.
It is known as the atomic number of an element.
Mendeleev's Periodic Table's principle:
The properties of the elements is a periodic function of their atomic mass.
But, this was true only for the lighter elements.
So, the principle of the Long Form of the Periodic Table is:
The properties of the elements is a periodic function of their atomic numbers.
When a river flows over a cliff its
Answer:Energy is coverted into a waterfall
Explanation:Answer:A waterfall is a sudden drop in a river as it flows over a rock cliff. This happens when the river passes from a layer of hard rock to a layer of softer rock, and the water erodes away the softer rock. A watershed is the term given to the land that drains water into a particular stream, lake, or river.
Which property is common to noble gases?
high reactivity
strong odor
brightly colored
low reactivity
Answer:
'Low reactivity' is common property of noble gases.
Explanation:
The properties of noble gases are:
They are colorless, odorless and mono atomic gases.They are found in group number 18 of the modern periodic table.For example ; helium , xenon etc.They have completely filled [tex]ns^2np^6[/tex] electronic configuration in their valence shells which accounts for their inert nature and low reactivity.They have high ionization enthalpies.The electron gain enthalpies of noble gases are positive.Define energy conservation.
Answer:
Energy Conservation is the effort made to reduce the consumption of energy by using less of an energy service.
Energy conservation refers to both the physical principle that energy cannot be created or destroyed and the practical approach of reducing energy consumption and improving efficiency. It involves both changes in individual behaviors and technological advancements to lower energy use and waste.
Energy Conservation Defined
Energy conservation is an important concept in Physics that refers to two key ideas. Firstly, it encompasses the principle that energy cannot be created or destroyed, only transformed from one form to another. This is known as the Conservation of Energy principle. Secondly, in a more practical sense, energy conservation relates to methods and strategies aimed at reducing energy waste and enhancing efficiency. This includes behaviors like turning off lights when not in use, driving efficiently, and using energy-efficient appliances.
Conservation of energy ensures that we reduce our consumption, either by decreasing activities that use energy or by improving the efficiency with which we perform tasks. An example of increasing efficiency would be implementing technological advancements, such as better-insulated homes, which require less energy for heating.
In summary, energy conservation serves both as a fundamental physical law and as a practical approach to manage and reduce energy usage in our daily lives. This dual understanding facilitates the development of sustainable practices and the creation of more efficient technologies, aimed at minimizing our ecological footprint.
How are heterogeneous mixtures and solutions different?
Both are considered mixtures - that is, they are made up of two or more pure substances. ... A heterogeneous mixture appears to be made of different substances. A solution appears the same throughout. In the fluid phase (gas or liquid, or any combination of those) a solution is transparent (thought not colourless).
Final answer:
Heterogeneous mixtures have non-uniform composition and can be differentiated by eye, while solutions have uniform composition throughout and no settling occurs.
Explanation:
A heterogeneous mixture is a combination of two or more substances in which the composition is not uniform throughout the sample, and the individual substances can be differentiated by eye. Examples of heterogeneous mixtures include trail mix, salad, and blood. On the other hand, a solution is a type of homogeneous mixture where the composition is uniform throughout and no settling occurs. Solutions can be colored but are transparent, and the dissolved species are molecules or ions. Examples of solutions include air, simple syrup, and seawater.,
Counting atoms !!! Science help please
Answer:
Details are below
Explanation:
A Compound is made of number of atom of element, that have a specific ratio.
Below are the details of elements and the number of its atoms:
1) NaOH
Element : #of atoms
Na 1
O 1
H 1
__________________
Total 3
---------------------------------
2) HNO₃
Element : #of atoms
H 1
N 1
O 3
___________________
Total 4
----------------------------------
3) Li₂O
Element : #of atoms
Li 2
O 1
__________________
Total 3
------------------------------------
4) Li₂SO₄
Element : #of atoms
Li 2
S 1
O 4
____________________
Total 7
------------------------------------------
5) NH₄Cl
Element : #of atoms
N 1
Cl 1
H 4
____________________
Total 6
------------------------------------------
6) CaClO₃
Element : #of atoms
Ca 1
Cl 1
O 3
____________________
Total 5
------------------------------------------
7) H₂COCH₂
Element : #of atoms
C 2
H 4
O 1
____________________
Total 7
------------------------------------------
8) Mg(OH)₂
Element : #of atoms
Mg 1
H 2
O 2
____________________
Total 5
------------------------------------------
9) Al(OH)₃
Element : #of atoms
Al 1
H 3
O 3
____________________
Total 7
------------------------------------------
10) NH₄C₂H₃O₂
Element : #of atoms
N 1
H 7
C 2
O 2
____________________
Total 12
------------------------------------------
11) NaC₂H₃O₂
Element : #of atoms
Na 1
H 3
C 2
O 2
____________________
Total 8
------------------------------------------
12) (NH₄)₃ PO₄
Element : #of atoms
N 3
H 12
P 1
O 4
____________________
Total 20
----------------------------------------------
Each molecule has a distinct composition of atoms, and the total number of atoms varies based on the elements present and their respective quantities in each compound.
1. **NaOH (Sodium Hydroxide):**
- Sodium (Na): 1 atom
- Oxygen (O): 1 atom
- Hydrogen (H): 1 atom
- Total: 3 atoms
2. **HNO3 (Nitric Acid):**
- Nitrogen (N): 1 atom
- Oxygen (O): 3 atoms
- Hydrogen (H): 1 atom
- Total: 5 atoms
3. **Li2O (Lithium Oxide):**
- Lithium (Li): 2 atoms
- Oxygen (O): 1 atom
- Total: 3 atoms
4. **Li2SO4 (Lithium Sulfate):**
- Lithium (Li): 2 atoms
- Sulfur (S): 1 atom
- Oxygen (O): 4 atoms
- Total: 7 atoms
5. **NH4Cl (Ammonium Chloride):**
- Nitrogen (N): 1 atom
- Hydrogen (H): 4 atoms
- Chlorine (Cl): 1 atom
- Total: 6 atoms
6. **CaClO3 (Calcium Chlorate):**
- Calcium (Ca): 1 atom
- Chlorine (Cl): 1 atom
- Oxygen (O): 3 atoms
- Total: 5 atoms
7. **H2COCH2 (Formaldehyde):**
- Carbon (C): 2 atoms
- Oxygen (O): 1 atom
- Hydrogen (H): 4 atoms
- Total: 7 atoms
8. **Mg(OH)2 (Magnesium Hydroxide):**
- Magnesium (Mg): 1 atom
- Oxygen (O): 2 atoms
- Hydrogen (H): 2 atoms
- Total: 5 atoms
9. **Al(OH)3 (Aluminum Hydroxide):**
- Aluminum (Al): 1 atom
- Oxygen (O): 3 atoms
- Hydrogen (H): 3 atoms
- Total: 7 atoms
10. **NH4C2H3O2 (Ammonium Acetate):**
- Nitrogen (N): 1 atom
- Hydrogen (H): 7 atoms
- Carbon (C): 2 atoms
- Oxygen (O): 2 atoms
- Total: 12 atoms
11. **NaC2H3O2 (Sodium Acetate):**
- Sodium (Na): 1 atom
- Hydrogen (H): 3 atoms
- Carbon (C): 2 atoms
- Oxygen (O): 2 atoms
- Total: 8 atoms
12. **(NH4)3PO4 (Ammonium Phosphate):**
- Nitrogen (N): 3 atoms
- Hydrogen (H): 12 atoms
- Phosphorus (P): 1 atom
- Oxygen (O): 4 atoms
- Total: 20 atoms
In summary, each molecule has a distinct composition of atoms, and the total number of atoms varies based on the elements present and their respective quantities in each compound.
Learn more about number of atoms here:
https://brainly.com/question/6258301
#SPJ6
Which of the following can be justified by the Bohr atomic model?
X-ray formation
Geometric shape of orbitals
Energy difference The first ionization of the same group of elements
Differential linear emission spectra of different elements
Please explain why
Answer:
nani
Explanation:
omeo wa moo shindau nani
(proberly spelt it wrong too.)
Why are groups 1 and 2 referred to as the s-block of the periodic table
Answer: This is because their valence electrons are located in the S - orbital
Explanation:
This is because their valence electrons are located in the S - orbital.
ACROSS
2. Tool that shows wind
direction
3. Temperature scale where
water freezes at 32 degrees
and boils at 212 degrees.
Explain why the reactivity series must be used for single replacement reactions, but not for double replacement.
Answer:
Here's what I get
Explanation:
In a single replacement reaction, one element must displace another element from its compound.
Thus, we must consider the reactivity series, because an element lower down in the series cannot replace one that is above it.
In a double replacement reaction, the cations change partners with the anions. All we need consider are the solubilities of the new cation-anion partners.
In a single replacement reaction, it is mandatory that one element displaces the other according to their reactivity on the reactivity series.
On the other hand, In a double- displacement reaction; the cations just exchange anions and vice versa.
An example of a single displacement reaction is;
A reaction between HCl and Na metal where Na+ ion displaces H+ ion as a result of higher reactivity.An example of a double displacement reaction is;
A reaction between NaOH and HCl to form H2O and NaCl.As such, there's no preference in double displacement reactions as ions are swapped.
Read more:
https://brainly.com/question/17071747
Sample of gas occupies 10.0 L at 50 ˚C. Assuming that the pressure is constant what volume will
the gas occupy at 100 ˚C?
Answer:
20 Liters
Explanation:
If the pressure is supposed to be constant, one of Charles - Gay Lussac's laws can be used to solve the exercise. His statement says that "the volume of the gas is directly proportional to its temperature at constant pressure", mathematically it would be:
[tex]\frac{V1}{T1} = \frac{V2}{T2}[/tex]
Considering T₁ = 50 ° C; V₁ = 10.0 L; and T₂ = 100 ° C, we can calculate the volume V₂ Clearing it from the equation and replacing the values to perform the calculation:
V2= (V1 x T2) / T1 = (10.0 L x 100°C) / 50 °C = 20 L
Therefore, the gas at 100 ° C will occupy a volume of 20.0 L.
To find the volume a gas will occupy at a higher temperature at constant pressure, use Charles's Law formula V1/T1 = V2/T2. After converting Celsius to Kelvin, solving the problem indicates the new volume at 100 °C would be approximately 11.54 L.
Explanation:The question involves calculating the change in volume of a gas when it is subjected to a change in temperature, knowing that the pressure is held constant. This is a problem that can be addressed using Charles's Law, which states that the volume of a gas is directly proportional to its temperature on a Kelvin scale. To solve the problem, you must first convert the temperatures from Celsius to Kelvin by adding 273.15 to each temperature. Once you have the temperatures in Kelvin, you can use the formula V1/T1 = V2/T2, where V1 is the initial volume, T1 is the initial temperature, V2 is the final volume, and T2 is the final temperature.
In this case, the initial temperature is 50 °C (323.15 K) and the final temperature is 100 °C (373.15 K). The initial volume is 10.0 L, and you are solving for the final volume.
Using the formula:
V2 = V1 * (T2/T1) = 10.0 L * (373.15 K / 323.15 K) = 11.54 L
This is the volume the gas will occupy at 100 °C at constant pressure.
When a chemical change occurs, new ________ are always formed.
new SUBSTANCES are fomed
Substance being reduced?
Answer:
[tex]Ni^{2+}[/tex]
Explanation:
From the equation attached , [tex]Ni^{2+}[/tex] is reduced. This is because reduction is equivalent to decrease in the oxidation number. In the equation , The oxidation number of Ni is reduced from +2 to 0.
NB, The oxidation number of a neutral atom is zero
How has the growing human population changed the rate at which resources are used?
What are all of the pressure conversions ? like torr atm kPa
Answer:
Explanation:
Torr:
Torr is the measure of pressure produced by one mmHg equal to the 1/760 of standard pressure used to the pressure of vacuum system.
Millimeter mercury mmHg:
It is the manometric pressure unit. It is defined as, the pressure exerted by column of mercury one millimeter high. it is represented by mmHg.
Torr to mmHg conversion:
Both are equal to each other.
1 torr = 1 mmHg
Torr to atm:
Torr is converted into atm by dividing the torr value 760.
mmHg to atm.
mmHg is converted into atm by dividing the torr value 760.
Kilopascal:
The kilopascal is the unit of pressure. It is represented by KPa.
it is the pressure generated by 10 g mass of substance on area of 1 cm².
There are 1000 pascal in one kilopasca.
one atm = 101.325 KPa
one atm = 101325 Pa
atm can be converted into KPa by multiplying the given atm value with 101.325.
For example:
4.1 atm × 101.325 kpa/ 1 atm
415.432 atm. kpa / 1atm
415.432 kpa
Kpa to atm:
415.432 kpa/101.325 kpa × 1 atm
4.1 × 1 atm
4.1 atm
Pressure units such as pascals (Pa), kilopascals (kPa), atmospheres (atm), millimeters of mercury (mm Hg), and torr are commonly used in chemistry. The standard conversion equivalencies enable accurate measurement when switching between these units. For example, to convert torr to atm, divide by 760, and to convert psi to kPa, multiply by 6.895.
Understanding pressure conversions is important in chemistry when dealing with gases. The most common units of pressure are pascals (Pa), kilopascals (kPa), atmospheres (atm), millimeters of mercury (mm Hg), and torr. The relations between these units are as follows:
1 bar = 100,000 Pa = 1.01325 atm
To convert these units, use the specified equivalencies. For example, to convert from torr to atm, use the following formula:
Pressure in atm = Pressure in torr / 760
To convert 32 psi to kPa: 32 psi * 6.895 = 220.64 kPa (as 1 psi = 6.895 kPa)
To convert 6.50 millibars to atm: 6.50 m bars / 1013.25 = 0.00642 atm (since 1 bar = 1.01325 atm, and 1 mbar = 0.001 bar)
It's essential to use these conversion factors correctly to obtain accurate pressure values in different units.
450g of chromium(iii) sulfate reacts with excess potassium phosphate. How many grams of potassium sulfate will be produced? (ANS: 6.0*10^2g K2SO4) I need the working and there are a couple more of these if someone's tryna help my dumb self.
Answer:
1597.959 g
Explanation:
Given Data:
Amount of Cr₂(SO₄)₃ = 450 g
Amount of potassium phosphate K₃PO₄ = in Excess
grams of potassium sulfate K₂SO₄= ?
Solution
The Reaction will be
Cr₂(SO₄)₃ + 2K₃PO₄ ----------> 3K₂SO₄ + 2CrPO₄
Information that we have from reaction
Cr₂(SO₄)₃ + 2K₃PO₄ ----------> 3K₂SO₄ + 2CrPO₄
1 mol 2 mol 3 mol
we come to know from the above reaction that
1 mole of chromium(iii) sulfate (Cr₂(SO₄)₃) react with 2 mole of potassium phosphate (K₃PO₄) to produce 3 mole of K₂SO₄
We also know that
molar mass of Cr₂(SO₄)₃ = 147 g/mol
molar mass of K₃PO₄ = 212 g/mol
molar mass of K₂SO₄ = 174 g/mol
if we represent mole in grams then
Cr₂(SO₄)₃ + 2K₃PO₄ ----------> 3K₂SO₄ + 2CrPO₄
1 mol (147 g/mol) 2 mol (212 g/mol) 3 mol (174g/mol)
So, Now we have the following details
Cr₂(SO₄)₃ + 2K₃PO₄ ----------> 3K₂SO₄ + 2CrPO₄
147 g 424 g 522 g
So,
we come to know that 147 g of Cr₂(SO₄)₃ combine with 424 g of 2K₃PO₄ produce 522 g of K₂SO₄
So now we calculate that how many grams of potassium sulfate will be produced
Apply unity formula
147 g of Cr₂(SO₄)₃ ≅ 522 g of K₂SO₄
450 g of Cr₂(SO₄)₃ ≅ ? g of K₂SO₄
by doing cross multiplication
g of K₂SO₄ =522 g x 450 g / 147 g
g of K₂SO₄ = 1597.959 g
So the write answer is 1597.959 g
***Note: By calculation it is obvious that the correct answer is 1597.959 g
Is phosphorus a cation or anion
Answer:
So whilst Phosphorus is an anion, it will usually combine with Iron or Aluminium and act like a cation. The more fine colloids in the soil (such as clay) then the greater the ability of the soil to bind cations.
Explanation: