Answer:
The correct answer is What area's do I need to improve.
Explanation:
This will help her alot
Answer:
A) What areas do I need to improve?
Explanation:
To strengthen her skills she needs to improve and be better.
In the launch of the Space shuttle Discovery what does "auto sequence start" mean?
The countdown clock before a rocket launches is one of the most remarkable timepieces in the world. As indicated by the "T-minus" mark, the hours and minutes tick down to launch. “Auto sequence start” is a breakdown of some of the big milestones leading up to that final moment. If there are no technical issues, at T-minus 31 seconds, the ‘go’ command will be given “Auto sequence start” which means the Ground launch sequencer will hand off primary control. It will be handed off to the shuttle’s onboard computers.
_____ describes the way the components in a network interact.
A logical topology is how devices appear connected to the user. A physical topology is how they are actually interconnected with wires and cables.
You have a usb storage device that you cannot get working. you have enabled all appropriate usb options in the latest 2.2 kernel but still cannot get your device working. what is most likely the source of the problem?
When a windows computer starts, it initiates the stateless address autoconfiguration process, during which it assigns each interface a link-local unicast address. what is the order of steps involved in this autoconfiguration process?
14. Which now-established technology went through the “emerging” phase in the early 2000s and makes the sharing of ideas much easier? (1 point)
virtual reality
email marketing
video conferencing
social media
15. One of the elements that make the internet such a significant development is its ability to do which of the following? (1 point)
connect people all around the world
stream movies
offer ecommerce
share photos
the five steps in the fetch/execute cycle and how do they correspond to a restaurant
Constructors that contain parameters are called ____.
It may be necessary to initialize the various data elements of different objects with different values when they are created. This is achieved by passing arguments to the constructor function when the objects are created. The constructors that can take arguments are called parameterized constructors.
Hannah dakota's experiment obtained reaction time data using a factorial design with two independent variables. she should use a __________ to evaluate her data
What is the physical address of the logical address 8205?
Which three states can be applied to switches using vlan trunking protocol (vtp)? select one:
a. transparent, server, and client
b. secure, transparent, and gateway
c. master, server, and client
d. open, closed, and active?
A switch can be configured in any of the above VTP modes.
Transparent: VTP transparent switches forward VTP ads that they receive out their trunk ports in VTP version 2. However, VTP transparent switches don’t participate in VTP.
Server: In this mode, you can create, modify and delete VLANs. You can also specify other parameters like VTP pruning and VTP version for the entire VTP domain.
Client: This mode behaves the same as server, but you cannot create, modify and delete VLANs on a VTP client.
If a dbms enforces a delete restrict option on the referential integrity constraint between client and agent in the happy insurance database, what will be the outcome after a user tries to delete the last record (a4, james, 3, 90, 2010, a3) from agent?
Answer these questions and label each answer with the correct number.
1. List the stages in the technology design process.
2. What are prototypes used to test?
3. Why do engineers redesign a product after testing a prototype?
4. To whom do engineers communicate the solution?
Thanks!
he technology design process, like scientific inquiry, does not always follow rigid steps. Often, engineers follow a common process: They identify a need, research the problem, design a solution, build and evaluate a prototype, troubleshoot and redesign, and communicate the solution.
A prototype is an early sample, model, or release of a product built to test a concept or process or to act as a thing to be replicated or learned from. ... A prototype is generally used to evaluate a new design to enhance precision by system analysts and users.
Engineers fix flaws and any other problems that they could have came across. Also, redesigning can lead to improvements of the product
Engineers find solutions to the problems faced by the society . Once the solution has been devised the engineers communicate it to the laborers and the workers so the implement it on field or on the work stations.
Submitting a cover letter and resume is a step in the process of applying for a job.
____ driving is more complex and often confusing, know your route
Answer:
The answer to this question is "urban".
Explanation:
In this question, the answer is urban because Urban or city driving includes a type of complex driving conditions. Spaces are bound; you deal with many vehicles, bicyclists, pedestrians, vans and one-way roads. To control complex driving we use the concept of Urban traffic control. This process provides central computers to co-ordinate and monitor larger numbers of intersections.
Including AND in an IF statement means more than one condition can be included in the statement. exactly one condition can be included in the statement. the result may be both true and false at the same time. a new spreadsheet is generated using only data that meets the conditions in the statement
Answer:
more than one condition can be included in the statement.
Explanation:
For example, if your mom tells you:
"You can only go out tonight if you do your homework and clean up your room"
The word and in the if condition is used to add another condition to the existant one, so the use of the word and in If statements is used to add more than one condition to the statement.
What is the minimum number of bits you would need to encode the 26 letters of the alphabet plus a space - a total of 27 characters?
Answer: 5 bits.
Explanation:
If we need to encode 27 characters, we will need 27 distinct symbols.
If we want to use binary numbers, that can take only one of two values (1 or 0), we need a number of bits which possible combinations, add to at least 27.
The minimum number of bits needed to represent 27 combinations, is the least power of 2, greater than 27, i.e., 2⁵ = 32.
So, it will needed at least 5 bits to represent the 26 letters of the alphabet plus a space-a total of 27 characters.
References placed at the bottom of a page are known as _____.
You can upgrade a cpu by adding registers and cache memory to it.
a. True
b. False
How do you calculate the total resistance in a series circuit with more than one resistor?
The total equivalent resistance, is given as:
Rtotal = R1 + R2 + R3 , where R1 is the resistance of the first resistor, R2 of the second and R3 f the third
"a terminal has two input queues." as a user types each character to the terminal, it is collected in the ____ queue.
Two major B2B models are ________. Select one: a. Auctions and social commerce b. Catalogs and vertical markets c. Sell-side marketplaces and e-sourcing d. Outsourcing and horizontal markets
The major two B2B models are c. e-sourcing and sell-side marketplaces.
Explanation:B2B is a business to business model which means the exchange of goods or services which happens between corporations or organizations but not with customers. It is providing services or goods online to other company. Example, a cyber-security firm providing online service to an e-commerce company as part of risk mitigation plan to avoid credit card fraud.
The advantage of such model is sustainable and high-profit margin from repeated clients.
One disadvantage is this model will be having a smaller number of customers.
When managing dnf, what is the full path to the directory where should place .repo files?
The full path for placing .repo files when managing dnf is /etc/yum.repos.d/. This directory holds repository configuration files for the package manager.
When managing dnf (Dandified YUM), the full path to the directory where you should place .repo files is /etc/yum.repos.d/. This directory is used by the package manager to store repository files, which are used to configure the sources from which software packages can be obtained.
It is important that any .repo files added to this directory have the proper syntax to ensure the dnf package manager can read and use them correctly.
which of the following is not an advantage of using asynchronous data transmission
a) Overhead of start and stop bits
b) False recognition of these bits due to noise on the channel
Answer:
Inexpensive software.
Your company is trying to get out of the responsibility of purchasing and hosting its own hardware so it won’t have to finance or manage a datacenter anymore. Your boss has told you that you need to install an operating system on all of the cloud-based servers. This is an example of what type of cloud computing?
Answer:
Software as a Service (SaaS).
Explanation:
SaaS has been a strong trend in the business world. It is an acronym for Software as a Service, which means in our language software as a service.
That is, they are online applications that can be used on your computer, tablet or mobile phone simply and remotely.
It is a program that is not installed and that is used as a service by connecting to the Internet.
As a service, it means that the customer does not purchase a license for a product but the right to enjoy the service offered.
Therefore, all work related to the software is in the vendor's hands.
Making a product available in SaaS format is a way of distributing content or technology solution in a more accessible and secure way.
Software as a service may also be known by other names, such as web-based, on-demand, or hosted software.
Netflix is a notorious example of SaaS that has gained prominence worldwide.
How do you calculate the total voltage in a series circuit with more than one component?
Voltage is the same across each component of the parallel circuit. The sum of the currents through each path is equal to the total current that flows from the source. You can find total resistance in a Parallel circuit with the following formula: 1/Rt = 1/R1 + 1/R2 + 1/R3 +...
If you were given a 3D microscope to use for photography, which object(s) would you most want to photograph?
Answer and explanation:
Mainly, 3D microscopes are used in scientific research to observe the biologic composition of cells and microorganisms. If given the chance to use it to take some photographs, one good option could be to observe the cells of a zebrafish. Zebrafish have more than ten thousand (10,000) of cells that have the look of the sun's prominences. Comparing both of them could amaze us overall because of the difference in real sizes between but the similarity in shape.
____ data updates in your destination document if there are changes to the source data
A) integrated
B) embedded
C) linked
D) field
should i get a razer phone or gpd win pls help!!?
12. Which of the following is CourseBit®? (1 point)
an online class focused on drawing for architectural purposes
a leading Moodle™ development and hosting provider that focuses on highly customized systems
an icon in Blender® that allows you to easily switch between screens
a widget with which all animators should be familiar
13. In Blender®, which interface principle corresponds to the user interface that allows a user to view all options and tools at a glance with pushing or dragging editors around? (1 point)
non-blocking
non-overlapping
non-modal
non-confrontational
When a switch is closed, completing an lr series circuit, the time needed for the current to reach one half its maximum value is _____ time constants?