Answer:
0.084 M
Explanation:
molar mass of Na3PO4 = 3*23 + 31 + 4*16 = 164 g/mol
moles of Na3PO4 = mass / molar mass = 0.46/164 = 0.0028 mol
There are 3 moles of Na+ in 1 mol of Na3PO4, so there are 3*0.0028 = 0.0084 moles of Na+ in the solution
Molarity is defined as:
M = moles of solute/litre of solution
100 ml are equivalent to 0.1 L
Therefore:
M of Na+ = 0.0084/0.1 = 0.084 M
Dustin saw the following moon phase in the sky. What moon phase will he most likely see in 14 days? A. a first-quarter moon B. a new moon C. a last quarter moon D. a full moon Reset Submit
Answer: New Moon
Explanation: I Tried it on study island
Answer:
Answer: New Moon
Explanation:
You’re at the zoo and have a big red 1.80 L helium balloon. The barometric pressure today is 785 mmHg. Then you hear the roar of a lion. Startled, you accidentally release the balloon. It flies away. By the time it reaches the clouds, the atmospheric pressure that high is only 3.00 atmospheres. What would the volume of the balloon up there? (Temperature is constant)
Answer:
0.62 L
Explanation:
Step 1:
Data obtained from the question.
Initial Volume (V1) = 1.80 L
Initial pressure (P1) = 785 mmHg
Final pressure (P2) = 3.00 atm
Final volume (V2) =?
Step 2:
Conversion of the pressure in mmHg to atm.
It is important to express the initial and the final pressure in the same unit. Either express both in atm or in mmHg. What ever the case is, we'll still arrive at same answer. Here, we shall be converting from mmHg to atm. This is illustrated below:
760mmHg = 1atm
Therefore, 785 mmHg = 785/760 = 1.03 atm
Step 3:
Determination of the final volume. This is illustrated below.
We shall be applying the Boyle's law equation since the temperature is constant.
P1V1 = P2V2
Initial Volume (V1) = 1.80 L
Initial pressure (P1) = 1.03 atm
Final pressure (P2) = 3.00 atm
Final volume (V2) =?
P1V1 = P2V2
1.03 x 1.8 = 3 x V2
Divide both side by 3
V2 = (1.03 x 1.8) /3
V2 = 0.62 L
Therefore, the new volume of the balloon is 0.62 L
Answer:
The volume of the balloon up there will be 0.618 L
Explanation:
Given:
V₁ = 1.8 L
P₁ = 785 mmHg = 1.03 atm
P₂ = 3 atm
Question: What would the volume of the balloon up there, V₂ = ?
According the ideal gas law:
PV = nRT
However, in this case, the number of moles of helium balloon is constant. The temperature will also be assumed to be constant. Therefore, the expression of the ideal gases is as follows:
P₁V₁ = P₂V₂
Solving for V₂
[tex]V_{2} =\frac{P_{1}V_{1} }{P_{2} } =\frac{1.03*1.8}{3} =0.618L[/tex]
In a flexible container , 15.9 L of gas is under 589 kPa of pressure at a temperature of 56.5 degrees * C . If the pressure and temperature change to STP , what is the new volume ? A 10.2 B 92.4L 112 D 76.6 L
76.6 litres is the volume of the gas if pressure and temperature changes to STP.
Explanation:
Data given:
Volume of the gas V1 = 15.9 litres
pressure of the gas P1 = 589 kPa or 5.81 atm.
temperature T1 = 56.5 degrees or 329.3 K
Final pressure P2 = 101.3 kPa
Final temperature T2 = 273 K
At STP the pressure is 1 atm or 101.3 kPa and the temperature is 273 K. So from the question the final temperature and pressure is at STP.
from Gas Law:
[tex]\frac{P1V1}{T1}[/tex] = [tex]\frac{P2V2}{T2}[/tex]
V2 = [tex]\frac{P1V1T2}{P2T1}[/tex]
Putting the values in the above rearranged equation of Gas Law:
V2 = [tex]\frac{589 X 15.9 X 273}{329.3X 101.3}[/tex]
= 76.6 Litres
If the pressure and temperature change to STP, the new volume will be "76.6 liters".
Pressure and TemperatureAccording to the question,
Initial pressure, P₁ = 589 kPa or,
= 5.81 atm
Final pressure, P₂ = 101.3 kPa
Initial volume, V₁ = 15.9 L
Initial temperature, T₁ = 56.5° or,
= 329.3 K
Final temperature, T₂ = 273 K
By using the Gas law,
→ [tex]\frac{P_1 V_1}{T_1} =\frac{P_2 V_2}{T_2}[/tex]
or, the new volume be:
→ V₂ = [tex]\frac{589\times 15.9\times 273}{329.3\times 101.3}[/tex]
= 76.6 L
Thus the above approach is correct.
Find out more information about Gas law here:
https://brainly.com/question/555495
Why is a coin able to float on top of water?
Answer:
i think it is because of surface tension
Explanation:
Answer:
sample response - Surface tension is the result of water molecules pulling inward with a strong attractive force. This attractive force brings the molecules on the surface of the water close together and causes the surface of the water to be drawn toward the water molecules beneath the surface. Since there are no water molecules above the surface, there are uneven forces. This causes surface tension, allowing the coin to float on the water’s surface.
Explanation:
ywww :) from edg.
15L tank of gas is contained at a high pressure of 8.20 •10 ^4 torr. The tank is opened and the gas expands into an empty chamber with a volume of 6• 10^4 L
The question is incomplete. The complete question is:
15L tank of gas is contained at a high pressure of [tex]8.20\times 10^4 torr[/tex]. The tank is opened and the gas expands into an empty chamber with a volume of [tex]6\times 10^4 L. What is the final pressure if the temperature remains constant.
Answer: 20.5 torr
Explanation:
To calculate the new pressure, we use the equation given by Boyle's law. This law states that pressure is directly proportional to the volume of the gas at constant temperature.
The equation given by this law is:
[tex]P_1V_1=P_2V_2[/tex]
where,
[tex]P_1\text{ and }V_1[/tex] are initial pressure and volume.
[tex]P_2\text{ and }V_2[/tex] are final pressure and volume.
We are given:
[tex]P_1=8.20\times 10^4torr\\V_1=15L\\P_2=?\\V_2=6\times 10^4L[/tex]
Putting values in above equation, we get:
[tex]8.20\times 10^4\times 15L=P_2\times 6\times 10^4L\\\\P_2=20.5torr[/tex]
Thus new pressure will be [tex]20.5torr[/tex]
How much heat is required, in calories, to raise the temperature of 57.8g of silver from 17.0oC to 43.5oC, if the specific heat of silver = 0.057cal / goC?
Answer:
83.60oC per cal
Explanation:
The amount of heat required to raise the temperature of 57.8g of silver from 17.0°C to 43.5°C is 87.31 calories.
How to calculate energy?The energy required to raise the temperature of a substance can be calculated using the following formula:
Q = m × c × ∆T
Where;
Q = quantity of heat absorbed or releasedm = mass of the substancec = specific heat capacity∆T = change in temperatureQ = 57.8 × 0.057 × (43.5 - 17)
Q = 87.31calories
Therefore, the amount of heat required to raise the temperature of 57.8g of silver from 17.0°C to 43.5°C is 87.31 calories.
Learn more about energy at: https://brainly.com/question/13971985
Marcia is given an incomplete chemical equation that includes the number of nitrogen atoms present in the products of the reaction. How can she conclude that the reaction started with three nitrogen atoms?
Answer: There would have to be three nitrogen atoms in the products. The law of conservation of matter states that the amount of substance before a reaction occurs should be the same as the amount of substance after the reaction.
Explanation: This is the EXACT sample answer from the test, just reword it if you want. ^
According to the law of conservation of mass, Marcia can conclude that reaction started with 3 nitrogen atoms as mass of reactants and products are equal as per the law of conservation of mass.
What is law of conservation of mass?According to law of conservation of mass, it is evident that mass can neither created nor destroyed rather it can be restored at the end of a chemical reaction .
Law of conservation of mass and energy are related as mass and energy are directly proportional to each other which is indicated by the equation E=mc².Concept of conservation of mass is widely used in field of chemistry, fluid dynamics.
Law needs to be modified in accordance with laws of quantum mechanics under the principle of mass and energy equivalence.This law was proposed by Antoine Lavoisier in the year 1789.
Learn more about law of conservation of mass,here:
https://brainly.com/question/28711001
#SPJ2
Molecules of two substances at the same temperature have the same:
A) average kinetic energy.
B) heat content.
C) distance between the molecules.
D) average potential energy.
Answer:
heat content
Explanation:
the kinetic energy , distance between molecules, and potential energy are all depending on the substance
19 points:
The chemical reaction represented by the following balanced chemical equation takes place in aqueous
solution: MnO4 + 5 Fe2+8H - Mn2 + 5 Fe3+ 4H2O
When the disappearance of the permanganate ion, MnO4, is monitored, the rate of reaction for the
consumption of the ion is 4.0x10^2 mol/L.s. Calculate the reaction rate for all other reactants and products.
Answer:
Explanation:
MnO₄⁻ + 5 Fe2⁺ + 8H⁺ = Mn⁺² + 5Fe⁺³ + 4H₂O.
- d [MnO₄⁻ ] / dt = 4 x 10² mol /L.s.
- [ Fe²⁺ ] / dt = 5 x - d [MnO₄⁻ ] / dt
= 5 x 4 x 10² mol /L.s.
20 x 10²
- d [ H⁺] / dt = 8 x - d [MnO₄⁻ ] / dt
= 8 x 4 x 10²
= 32 x 10² mol /L.s.
+d [ Mn⁺² ] / dt = - d [MnO₄⁻ ] / dt
= 4 x 10² mol /L.s
+d [ Fe⁺³ ] / dt = 5 x - d [MnO₄⁻ ] / dt
= 20 x 10² mol /L.s
1. A crane lifts 300.5 kg to a platform that is 1.9 m above the ground. How much work is done? (HINT: 1" convert the
mass (kg) into newtons (force), then solve for work.)
Answer:
Work = 5595.31J
Explanation:
Mass = 300.5kg
Distance (h) = 1.9m
Acceleration due to gravity (g) = 9.8m/s²
Work done on an object is the product of the force applied over the distance the object is moved.
Work = force * distance
Force = mass * acceleration (a or g)
F = m* g
F = 300.5 * 9.8
F = 2944.9N
Workdone = force *distance
Work = 2944.9 * 1.9
Work = 5595.31J
The work done is 5595.31J
a. Adding or removing gas to a constant volume. What happens to the pressure? Is this a
direct or indirect relationship?
I think the answer is direct
What is the mass of solute in a 500 mL solution of 0.200 M
sodium phosphate (Na3PO4: M.W. 164.0)?
16.4 grams is the mass of solute in a 500 mL solution of 0.200 M .
sodium phosphate
Explanation:
Given data about sodium phosphate
atomic mass of Na3PO4 = 164 grams/mole
volume of the solution = 500 ml or 0.5 litres
molarity of sodium phosphate solution = 0.200 M
The formula for molarity will be used here to know the mass dissolved in the given volume of the solution:
The formula is
molarity = [tex]\frac{number of moles of solute}{volume in litres}[/tex]
putting the values in the equation, we get
molarity x volume = number of moles
0.200 X 0.5= number of moles
number of moles = 0.1 moles
Atomic mass x number of moles = mass
putting the values in the above equation
164 x 0.1 = 16.4 grams
16.4 grams of sodium phosphate is present in 0.5 L of the solution to make a 0.2 M solution.
The mass of solute in 500mL solution is 16.4 grams. The number of moles can be calculated by using Molarity formula to find Mass of the solute.
Given:
Atomic mass of Na3PO4 = 164 grams/mole
Volume of the solution = 500 ml or 0.5 litres
Molarity of sodium phosphate solution = 0.200 M
Calculation of Molarity:The formula for molarity will be used here to know the mass dissolved in the given volume of the solution:
Molarity = Number of solute / Volume of solution
Molarity * volume = number of moles
0.200 * 0.5= number of moles
Number of moles = 0.1 moles
Mass= Atomic mass * number of moles
On subsituting:
164 * 0.1 = 16.4 grams
16.4 grams of sodium phosphate is present in 0.5 L of the solution to make a 0.2 M solution.
Find more information about Molarity here:
brainly.com/question/17138838
what is the mass in grams of 0.375 mol if the element potassium, k?
Answer: 14.625g
Explanation:
No of moles= mass given/molar mass
No of moles given= 0.375mol
Mass is the unknown (?)
Molar mass of K= 39
No of moles = mass given/molar mass
Substitute the values
0.375= mass/39
Cross multiply
Mass = 39×0.375
Mass= 14.625g
The mass is 14.625g
Answer:
14.625g
Explanation:
Mass of a substance =number of moles of the substance × molar mass of the substance
Substance of interest is potassium, K
Given, Number of moles of K =0.375mol
Molar mass of K =39g/mol
Therefore, mass of K =0.375×39=14.625g
The Volume of a certain gas is 29.3 liters at STP. What would be the volume of the same gas at 1.39 atmospheres and -23.0oC? (R= 0.0821 L.atm/mol.k)
Answer:
V₂ =19.30 L
Explanation:
Given data:
Initial volume of gas = 29.3 L
Initial temperature = standard = 273 K
Initial pressure = standard = 1 atm
Final volume = ?
Final temperature = -23°C (-23+273 =250 K)
Final pressure = 1.39 atm
Solution:
Formula:
P₁V₁/T₁ = P₂V₂/T₂
P₁ = Initial pressure
V₁ = Initial volume
T₁ = Initial temperature
P₂ = Final pressure
V₂ = Final volume
T₂ = Final temperature
Solution:
V₂ = P₁V₁ T₂/ T₁ P₂
V₂ = 1 atm × 29.3 L × 250 K / 273 K × 1.39 atm
V₂ = 7325 atm.L.K / 379.47 K.atm
V₂ =19.30 L
3. How many grams of
CoCl, in 1/2 Liter would be
used to make a 1.0 molar
solution?
Answer:
47 grams CoCl needed.
Explanation:
1 mole weight of CoCl in 1 Liter solution => 1.0 molar solution
∴ 1/2 mole weight of CoCl in 1/2 Liter solution => 1.0 molar solution.
1/2 mole weight of CoCl = 1/2(94 g/mole) = 47 grams CoCl needed.
Final answer:
To make a 1.0 molar solution of CoCl₂ in half a liter of water, you would need 64.915 grams of CoCl₂, using its molar mass of 129.83 g/mol.
Explanation:
The question you are asking is about making a 1.0 molar solution of cobalt(II) chloride, CoCl₂, in 1/2 liter of water. To calculate the amount of CoCl₂ required, we will use the formula:
mass (grams) = molarity (mol/L) × volume (L) × molar mass (g/mol).
First, we need to establish the molar mass of CoCl₂. Cobalt has an atomic mass of about 58.93 g/mol, and each chlorine has an atomic mass of about 35.45 g/mol. So, the molar mass of CoCl₂ is:
58.93 g/mol (for Co) + 2 × 35.45 g/mol (for Cl) = 129.83 g/mol.
Now, we can calculate the required mass of CoCl₂ for a 1.0 M solution:
mass = 1.0 mol/L × 0.5 L × 129.83 g/mol = 64.915 grams.
Therefore, you would need 64.915 grams of CoCl₂ to make a 1.0 molar solution in half a liter of water.
what is the chemical formula for sodium oxide?
Answer:
Na20
Explanation:
I did a quick google search and it was right there lol
Answer:
It would be Na20 please mark brainliest have a nice day
Therefore, the independent variable was
and the dependent
variable was
In a study or experiment, the independent variable is what the researcher manipulates and the dependent variable is the response being measured. An example of this would be studying the effect of sunlight (independent variable) on plant growth (dependent variable).
Explanation:In any experiment or study, the independent variable is the factor that the researcher manipulates or chooses intending to cause a change. It's the variable you have control over. The outcome of this change is observed and measured in the dependent variable. The dependent variable responds to the change you made to the independent variable. For example, if you were studying the effect of varying amounts of sunlight on plant growth. The amount of sunlight would be the independent variable (as you are controlling the amount each plant gets), and the plant growth would be the dependent variable (as you measure it after).
Learn more about Dependent and Independent Variables here:https://brainly.com/question/1479694
#SPJ12
Answer:
first part of the problem: temperture and volume
second part: tempture and volume
hope this helps
Explanation:
Which elements have similar behavior?
A. Barium
B. Silicon
C. Aluminum
D. Strontium
E. Osmium
F. Beryllium
Answer:
The elements which have similar behavior are Barium, strontium and beryllium.
The elements that have similar behavior are Barium, strontium, and beryllium. The correct options are A, D, and F.
What are chemical elements?Chemical elements are substances present in the periodic table. There are 118 elements in the periodic table. All elements are arranged according to the atomic numbers of the elements.
Barium, strontium, and beryllium belong to the same group of the periodic table. They are called alkaline earth metals. They are very reactive at room temperature. These metals are all white, silvery, and shiny metals.
Alkaline earth metals have two electrons in their outer shell. Which gives them the same oxidation number, which is 2+. Alkaline earth metals have beryllium (Be), magnesium (Mg), calcium (Ca), strontium (Sr), barium (Ba), and radium (Ra).
Thus, the correct options are A, Barium, D, Strontium, and F, Beryllium.
To learn more about chemical elements, refer to the below link:
https://brainly.com/question/704538
#SPJ6
C6H1206 +602 → 6002 + 6H20 AH = -2,799 kJ
How much energy is given off when 100.0 g of C6H1206 react?
Answer:
C^6 H^1206, 602,6002, 6H ^20, 2799 AHkJ, 100g C^6 H^1206
Explanation:
If 0.214 mol of argon gas occupies a volume of 343.4 mL at a particular temperature and pressure, what volume would 0.375 mol of argon gas occupy under the same conditions?
Answer:
601.8mL
Explanation:
First, we'll begin by obtaining an equation connecting volume and number of mole together. This is illustrated below:
From the ideal gas equation:
PV = nRT
Divide both side by P
V = nRT/P
Now divide both side by n
V/n = RT/P
Under the same conditions simply means temperature(T), pressure (P) and the gas constant (R) are all constant i.e
RT/P => constant
Therefore, the above equation can be written as:
V1/n1 = V2/n2
Now we can solve for the final volume otherwise known as the new volume as follow:
Data obtained from the question include:
n1 (initial mole) = 0.214 mol
V1 (initial volume) = 343.4 mL
n2 (final mole) = 0.375 mol
V2 (final volume) =?
Applying the the equation V1/n1 = V2/n2, the final volume is obtain as illustrated below:
V1/n1 = V2/n2
343.4/0.214 = V2/0.375
Cross multiply to express in linear form
0.214 x V2 = 343.4 x 0.375
Divide both side by 0.214
V2 = (343.4 x 0.375)/0.214
V2 = 601.8mL
Therefore, 0.375 mol of argon gas will occupy 601.8mL under the same condition.
determine the molarity of a solution that has 0.267 mol of solute dissolved in 2.25 Liters of solution
Answer:
0.11866M
Explanation:
molarity is mol/L
0.267 mol/2.25L = 0.1186666...
round depending on how many digits you need
Answer this question in 2-3 sentences.
How is it possible that the water you are drinking today, is the same water the dinoaurs drank????
Answer ASAP
Extra Points!
Will mark brainiest
What role does genetic variation play in the existence of an organism?
Calculate the volume of a 3.50 M solution of H2SO4 made from 49 g of H2SO4
Answer:
0.143L
Explanation:
Molar mass of H2SO4 = 98g/Mol
No of mole = mass/molar mass
No of mole= 49/98 = 0.5 mol
No of mol = concentration × volume
Volume = n/C = 0.5/3.5 = 0.143L
The number 40 in the name calcium-40 represents
A. the atomic number
B. the number of protons in the atom
C. the sum of the protons and neutrons
D. none of these
Answer:
A. the atomic number
Explanation:
It is a member of the alkaline earth family of metals with the atomic symbol Ca, atomic number 20, and atomic weight 40. Calcium is the most abundant mineral in the body and combines with phosphorus to form calcium phosphate in the bones and teeth.
Meteorologists in New York City are tracking a hurricane that is approaching the city. What type of instrument or system are these meteorologists most likely using?
a ground station
a weather buoy
a ship
a satellite
Which of the following statements best describes what happens to water during vaporization?
A. The temperature of the water increases until the water molecules react with nitrogen in the air.
B. Water molecules overcome intermolecular forces and change into the gas phase.
C. Water molecules steadily increase in kinetic energy and gradually become further apart.
D. The temperature of the water increases until the water molecules separate into oxygen and hydrogen gas.
Answer: im pretty sure its D
Explanation:
According to intermolecular forces of attraction, statement which best describes what happens to water during vaporization is 'B'.
What are forces of attraction ?Forces of attraction is a force by which atoms in a molecule combine. it is basically an attractive force in nature. It can act between an ion and an atom as well.It varies for different states of matter that is solids, liquids and gases.
The forces of attraction are maximum in solids as the molecules present in solid are tightly held while it is minimum in gases as the molecules are far apart . The forces of attraction in liquids is intermediate of solids and gases.
The physical properties such as melting point, boiling point, density are all dependent on forces of attraction which exists in the substances.
Learn more about forces of attraction,here:
https://brainly.com/question/2396709
#SPJ2
Fill in each blank with the correct word.
The male reproductive cell is called a(n)
The female reproductive cell is called a(n)
When the male and female reproductive cells join during fertilization, a
forms.
Final answer:
The male reproductive cell is known as a sperm, and the female counterpart is an egg. They are both gametes, which are haploid cells vital for sexual reproduction. During fertilization, these cells combine to form a diploid cell called a zygote, initiating embryo development.
Explanation:
The male reproductive cell is called a sperm. The female reproductive cell is called an egg. When the male and female reproductive cells join during fertilization, a zygote forms.
Sexual reproduction involves the union of a male and a female gamete. Gametes are haploid cells, each carrying 23 chromosomes—half the number found in other body cells. The process of gametogenesis includes spermatogenesis and oogenesis, where sperm and eggs are produced respectively. In males, this occurs in the testes, often highlighted in figures on the male reproductive system, such as the one labeled Figure 27.2. During spermatogenesis, sperm acquire a tail and the ability to swim, essential for reaching the female gamete. The female counterpart, oogenesis, results in a single large egg from the initially formed four haploid cells.
Upon fertilization, a sperm cell and an egg cell unite to form a zygote, a diploid cell that contains a complete set of chromosomes, one set from each parent. This diploid cell marks the start of a new organism and it divides by mitosis as it travels to the uterus, eventually developing into an embryo.
The illustration shows the path of a laser leaving a laser pointer. At what point is the laser being absorbed?
Answer:
D not c
Explanation:
The point showing the laser being absorbed is D.
What is Laser?LASER stands for “Light Amplification by Stimulated Emission of Radiation”
Lasers not only increase the intensity of light but also generate light. Lasers emit light by stimulated emission of radiation, which increases the intensity of radiation. Some lasers produce visible light, and some produce ultraviolet or infrared rays.
The laser light exhibits some peculiar properties compared with the conventional light which make it unique.
Therefore, The point showing the laser being absorbed is D.
Learn more about Laser, here:
https://brainly.com/question/27853311
#SPJ3
what happens if 0.87 mol NaCl is dissolved in pure water creating 3.00 L of solution, what is its molarity of the resulting solution?
Answer:
0.29 molL-1 or 0.29 M
Explanation:
Now we have to use the formula
n=CV
Where
n= number of moles = 0.87 moles
C= concentration of the solution (the unknown)
V= volume of the solution = 3.00L
Now having specified all parameters except the unknown (molarity if the sodium chloride solution) we can now proceed to find it.
C= n/V
C= 0.87mol/3.00L
C= 0.29 molL-1
Answer:
0.29 mol/L
Explanation:
When sodium chloride (NaCl) is dissolved in water, it will dissociates to produce sodium ion (Na+) and chloride ion (Cl-) in solution as shown below:
NaCl —> Na+ + Cl-
Next, let us calculate the molarity of NaCl. This is illustrated below:
Mole of NaCl = 0.87 mole
Volume of solution = 3 L
Molarity =?
Molarity = mole of solute /Volume
Molarity = 0.87mole /3L
Molarity = 0.29 mol/L
Therefore, the molarity of NaCl is 0.29 mol/L