Chemical and physical properties are used to help identify substances. A substance's chemical properties identify whether or not that substance reacts with another substance. What chemical property is present in substances that react slowly to oxygen?

Answers

Answer 1
B
the ability to rust
Answer 2

Chemical and physical properties are used to help identify substances. A substance's chemical properties identify whether or not that substance reacts with another substance or it can be said that a chemical property of a substance will helps in deciding whether the substance will react or not with another substance. To react with oxygen, the substance should have the ability to burn, the more quickly the substance burn, more readily the substance will burn to produce light and heat.

This can also be explained with the formation of rust on a chemical compound, The more readily the compound reacts with oxygen, more readily it undergoes rusting .

For example when iron kept in open air, it undergoes rust as it reacts with oxygen.



Related Questions

Which of the following statements correctly describes the make-up and function of genes?

Genes are made of DNA and are carried on chromosomes.
Genes are not made of DNA, but they are carried on chromosomes.
Genes are made of chromosomes and carried on DNA.
Genes are not made of chromosomes but are carried on DNA.

Answers

Genes are made of DNA and are carried on chromosomes. 

Answer:

Genes are made of DNA and are carried on chromosomes.

Heat will flow from a hot object to a cold object until the objects reach A. stability. B. boiling point. C. collapse. D. equilibrium.

Answers

The thermal energy will flow from the hotter object to the cooler object until their temperatures are equal i.e. until they reach equilibrium.

Answer:
D. equilibrium

The wax of a burning candle is a fuel that combines with oxygen in the air. As the fuel is consumed, what happens to most of the energy stored in the bonds of the wax? A. It is used to produce work. B. It stays in the wax. C. It is released as potential energy. D. It is released as heat and light.

Answers

D. It is released as heat and light.

Answer:D. It is released as heat and light.

Explanation:

Energy cannot be created nor destroyed but can be converted from one form to another. This is the law of the conservation of energy. Energy is stored in the wax. When the wax is burnt, that energy is converted to another form of energy. In this case heat and light. Energy exists in various forms in nature. Energy is always converted from one form to another.

Make the selection that best completes the sentence.
All of the planets in our solar system orbit the sun
A. in perfect circles
B. at the same speed
C. in an ellipse
D. at the same distance

Answers

The answer would be C. in an ellipse

Hope this answer helps!
the answer is C, in an ellipse.

Which statement about trade during the period of the Roman Empire is correct? A. Trade supplied Romans with exotic goods and helped spread new ideas. B. Trade was confined to food staples transported over short distances. C. Most of the empire's outlying territories refused to trade with Rome. D. A lack of paved, well-maintained overland routes hampered Roman trade.

Answers

The answer Is A. Tarde supplied Romas with exotic goods.

I did the test to.

Option A i.e Trade supplied Romans with exotic goods and helped spread new ideas is the correct answer.

The Roman Empire was the center of trade between the East and the West. Besides trade of goods, the trade helped Spread new ideas and culture of East and the West in the Rome. So Trade routes were dissemination of new ideas and culture in the past.

What causes the Coriolis effect?
A. the different air movements north and south of the equator
B. the rotation of the earth on its axis
C. winds spinning off the equator
D. the friction that slows down winds near the earth's surface

Answers

It's B. The rotation of the earth on its axis.

If the molecular mass of tetraoxosulphate(VI) acid is 98, calculate it's vapour density.

Answers

We are given the molecular mass of tetraoxosulphate(VI) acid as 98 g/mol. The molecular formula of this is H₂SO₄ which is also known as sulfuric aid. The vapour density of a substance is the density of a vapour in relation to hydrogen gas. Therefore, it the mass of a volume of gas, divided by the mass of the same volume of hydrogen gas. We can use the following formula:

vapour density = molar mass of gas/ molar mass of H₂

vapour density = 98 g/mol H₂SO₄ / 2 g/mol H₂

vapour density = 49

The vapour density of tetraoxosulphate(IV) acid is found to be 49. It should also be noted that the vapour density is a unitless quantity.

balance the following chemical equations identify the type of reaction n2+f2–>nf3

Answers

n2 + 3f2  -----> 2nf3

Balance the chemical equations reaction n2+f2–>nf3  is  3N2 + 3F2 → 6NF3

To balance the chemical equation N2 + F2 → NF3, we need to make sure that there are equal numbers of each type of atom on both sides of the equation. Let's go through the steps to balance this equation:

1. Start by counting the number of atoms on each side of the equation. On the left side, we have 2 nitrogen (N) atoms and 2 fluorine (F) atoms. On the right side, we have 1 nitrogen (N) atom and 3 fluorine (F) atoms.

2. To balance the nitrogen atoms, we need to put a coefficient of 2 in front of NF3 on the right side. This gives us 2 nitrogen atoms on both sides.

N2 + F2 → 2NF3

3. Now let's check the number of fluorine atoms. On the left side, we have 2 fluorine (F) atoms, and on the right side, we have 6 fluorine (F) atoms.

4. To balance the fluorine atoms, we need to put a coefficient of 3 in front of F2 on the left side. This gives us 6 fluorine atoms on both sides.

3N2 + 3F2 → 6NF3

Now the equation is balanced, with equal numbers of nitrogen and fluorine atoms on both sides.

In terms of the type of reaction, this is a synthesis or combination reaction. In a synthesis reaction, two or more reactants combine to form a single product. In this case, nitrogen gas (N2) and fluorine gas (F2) react to form nitrogen trifluoride (NF3).

To know more about chemical equations reaction:

https://brainly.com/question/14192011

#SPJ6

Which 1.0 M acid solution has the largest concentration of hydronium [H3O+]?


HNO2



H2CO3



H2SO4



H3BO3


Answers

Answer:

H2SO4

Explanation:

OTHER ACIDS ARE WEAK ACIDS AND A VERY FEW AMOUNT OF H+ ARE RELEASED TO THE MEDIUM

Final answer:

The 1.0 M acid solution with the largest concentration of hydronium [H3O+] is H2SO4 (sulfuric acid). H2SO4 is a strong acid that completely ionizes in water, resulting in a high concentration of hydronium ions.

Explanation:

The 1.0 M acid solution with the largest concentration of hydronium [H3O+] is H2SO4 (sulfuric acid).

When an acid dissolves in water, it donates hydrogen ions (H+) to form hydronium ions (H3O+). The concentration of hydronium ions is directly related to the strength of the acid. In this case, H2SO4 is a strong acid, meaning it completely ionizes in water, resulting in a high concentration of hydronium ions.

On the other hand, HNO2 (nitrous acid), H2CO3 (carbonic acid), and H3BO3 (boric acid) are all weak acids, meaning they only partially ionize in water and produce lower concentrations of hydronium ions.

Which would not be associated with stable atmospheric conditions

afternoon thunder showers is the answer

Answers

The correct answer is - afternoon thunder showers.

When we say stable atmospheric conditions it means that the atmosphere should be relatively calm, without having any disturbances in it. A nice example for a stable atmospheric conditions is a clear sunny sky and a calm wind. On the other hand, we have the afternoon thunder showers. The afternoon thunder showers are the total opposite of stable atmospheric conditions. When they occur, there's lot of disturbances, air pressures are mixing, the winds are changing speeds, heavy rainfall occurs, the air pressure changes rapidly, there's electrical charges, all in all creating a real mess in the atmosphere.

Answer:

afternoon thunder showers.

Explanation:

9. According to the map, where would the strongest winds be expected?

Answers

We need the map to be able to see it to help you .

In the middle near Colorado.

when 2.85 moles if chlorine reacts with excess tin hiw many moles of tin(IV)chloride are formed

Answers

Start with the equation of the reaction at 115 ° C
Sn+2Cl2 = SnCl4
Thus 1 mole of Sn combined with 2 moles of chlorine produces 1 mole of SnCl4.

By proportion, 
1.425 moles of Sn will combine with 2.85 moles of chlorine to produce 1.425 moles of stannous chloride.

You may round 1.425 to 3 significant figures.

When 2.85 moles of chlorine reacts with excess tin, 1.425 moles of tin(IV) chloride are formed.

Stoichiometry Calculation

To solve this problem, we need to use the balanced equation for the reaction between chlorine (Cl₂) and tin (Sn) to form tin(IV) chloride (SnCl₄):

Sn + 2Cl₂ → SnCl₄

This equation tells us that 1 mole of Sn reacts with 2 moles of Cl₂ to produce 1 mole of SnCl₄. In this case, chlorine gas is in excess, meaning tin is the limiting reactant.

Steps:

First, determine the number of moles of chlorine gas available: 2.85 moles of Cl₂.From the balanced equation, 2 moles of Cl₂ react to form 1 mole of SnCl₄.Therefore, the moles of SnCl₄ formed can be calculated by dividing the moles of Cl₂ by 2:

Moles of SnCl₄ = 2.85 moles Cl₂ / 2 = 1.425 moles of SnCl₄

So, when 2.85 moles of chlorine reacts with excess tin, 1.425 moles of tin(IV) chloride are formed.

What kind of boundary is shown in the image below?

Answers

Just did this

the answer is divergent.

just got done doing this haha its divergent

Identify two kinds of data the student will likely collect during his experiment. Identify the type of data collected and how the student might present his data.

Answers

qualitative (physical e. g. colour) and quantitative (numerical e. g. 3 grams) data

Although your question is incomplete a general answer on the two kinds of data a student will collect during an experiment are : Qualitative and Quantitative data

Qualitative data are data that describes the physical attributes of the results of an experiment. It can be obtained by observation.  

Example : the color of the solute or solvent used during the experiment  while

Quantitative data are data obtained in the numerical form during an experiment, it can be obtained by taking physical measurements and they are collected for statistical analysis.

Example : The molecular Weight of the solution, solvent or solute used for an experiment.

Hence the two main types of data collected during an experiment are : Quantitative and Qualitative data.

learn more : https://brainly.com/question/14743028

Is air pressure greater at the equator than at the north pole?

Answers

The air pressure in both poles is lower than at the equator.

What happens if someone let's go of the button on an electric door bell

Answers

they would get shocked

Releasing the button on a doorbell opens the electrical circuit, stopping the flow of current and the bell's sound. This action is similar to how a circuit breaker works, by cutting off the electric current to prevent a continuous ring or possible overloading.

When someone releases the button on an electric doorbell, the electrical circuit that was completed when the button was pressed becomes open. This happens because doorbells are typically operated by a push button switch, which controls the flow of electricity. As long as the button is pressed, the circuit is closed, allowing electrical current to flow through and activate the bell or buzzer. Once the button is let go, the circuit opens, the current stops flowing, and the doorbell sound ceases.

Additionally, this action is akin to a circuit breaker in the way it interrupts the electrical flow. The breaker's electromagnet becomes less strong without the current, which in turn releases the moving contact, breaking the circuit. Though an electric shock from a doorbell is highly unlikely due to the low voltage involved, it's important to remember safety protocols when handling electrical circuits to prevent shock, reminiscent of the "can't let go" effect described with more dangerous voltages.

What determines the atomic number of an element?

A. protons

B. neutrons

C. electrons

Answers

The number of protons in the nucleus of an atom determines an element's atomic number. In other words, each element has a unique number that identifies how many protons are in one atom of thatelement. For example, all hydrogen atoms, and only hydrogen atoms, contain one proton and have anatomic number of 1.
Protons are your answer!
Hope this helps!

if a copper acetate hydrate, Cux(C2H3O2)y zH2O compound is found to contain 31.82% Copper, 59.14% acetate,and the remainder is water. What is the empirical formula of this compound ?

Answers

in empirical formulas, we find the minimum ratio to which the components of the compound are combined in.
Cux(C2H3O2)y zH2O 
first we need to write the percentages as masses and assume that in 100 g of the compound these are the masses of each compound its composed of
                  Cu                           C₂H₃O₂          H₂O
                31.82 g                      59.14 g        9.04 g
 molar mass
                 63.5 g/mol                 59 g/mol        18 g/mol
            31.82/63.5                    59.14/59        9.04/18
            = 0.5                             = 1.002          - 0.5
divide by the smallest number 
               0.5/0.5 = 1                   1.0/0.5 =2      0.5/0.5 = 1

Therefore x = 1
                y = 2
                z = 1
Cu(C2H3O2)₂ H2O 

which factor would increase the carrying capacity for a white-tailed deer in an eastern temperate forest ecosystem

Answers

Answer:

Development of natural reserves of forest land and crack down on hunting

Explanation:

White-tailed deer also known as Virginia deer is a small to medium-sized deer common to North America, and South America. Deer coat is reddish-brown in spring and summer they turn grey-brown through the fall in winter. A resident of the temperate grasslands adapted themselves to open lands of prairie, and savanna woodlands. They commonly eat leguminous crops and forge on other crops including leaves, cacti, and shoots. They also eat acorns, fruit, and corn.  Due to climate change and the influence of man majority of deer have migrated and the impact of diseases has also reduced the large deep population which can be overcome by rehabilitation programs so as their original habitats are ensured.

Molecular weight of PbCl2 = 278 g/mole Mass of beaker + PbCl2 = 62.19 g Mass of beaker = 57.77 g Mass of PbCl2 per 100 mL = g Moles PbCl2 per 100 mL = [Pb-2] based upon this investigation = M [Cl-] based upon this investigation = M

Answers

PbCl2--->Pb2+  +  2Cl-

The  mass   of  PbCl2   is   =mass   of  the  beaker+Pbcl2  minus   mass  of  the  beaker
that  is  62.19-57.77g=  4.42grams

moles  of PbCl2=  4.42g/278g/m0l = 0.0159moles

concentration  of  (Pb2+)
since  mole  ratio  of  PbCl2  to  Pb2+  is   1:1  therefore  the  moles  of  Pb2+  is  also  0.0159moles
concentration  =0.0159/100 x1000=0.159M

concentration  of  CI-  is  two  time  that  of  Pb2+  from  the  equation  above  therefore  concentration   of  Cl-  =  0.159 x2  =0.318M

From which sphere does most water evaporate

Answers

Evaporation from the oceans is the primary mechanism supporting the surface-to-atmosphere portion of the water cycle. After all, the large surface area of the oceans (over 70 percent of the Earth's surface is covered by the oceans) provides the opportunity for large-scale evaporation to occur. 

HOPE THIS HELPS. :)
When The sphere does Most water evaporation comes from the oceans and then is returned to the earth as snow or rain.  Sublimation refers to the evaporation from snow and ice. When Transpiration refers to the expiration of water through the minute are pores or stomata of a tree. An Evapotranspiration is a term used by hydrologists about the three processes together, transpiration, sublimation, and last is evaporation

Learn more information:

https://brainly.com/question/14746534

Energy from food is measured in..

1) Joules
2) Watts
3) Calories
4) Kilograms

Answers

Energy from food is measured in calories. We convert the calories into chemical energy.

Therefore, the answer is the 3rd choice.

Will give brainlest. Quinn was attempting to model the rock cycle with taffy pieces. She cut the taffy into small pieces with scissors. What portion of the rock cycle is she modeling to start her activity?
A.Erosion, where rock pieces are broken into tiny sediments

B.Weathering, where rock pieces are broken into tiny sediments.

C.Cementation, where sediments and rock pieces are smashed and cemented together.

D.Cutting the taffy into small pieces is not modeling a portion of the rock cycle.

Answers

Hi!

The portion of the rock cycle that Quinn was modeling by cut the taffy into small pieces with scissors was the Weathering, where rock pieces are broken into tiny sediments.

Weathering is a part of the Rock Cycle that doesn't involve movement and consists in the breaking down of minerals and rocks when they enter into contact with the atmosphere, hydrosphere or biosphere. Weathering can be Physical, Chemical or Biological, according to the mechanism of the rupture of the rock.

The complete Rock Cycle describes how Rocks can be transformed into Sedimentary, Igneous or Metamorphic Rocks. 

Have a nice day!

what is the total amount of heat, in joules, required to completely vaporize a 50.0-gram sample of liquid water at its boiling point at standard pressure

Answers

To get the total amount of heat or the energy required we will get it from this formula:
Q= M L 
when M= the mass of the substance =50 g
and L= the specific latent heat of vaporization 
and when the latent heat of vaporization is defined as the energy required to change the state of the substance from the liquid to gas phase, and here for water, we can assume it as 2258 j/g.
So by substitution:
Q = 50 * 2258 = 112900 J 

Precipitation will increase in areas where there is A) less transpiration and less run-off. B) lower temperatures and more evaporation. C) lower temperatures and less evaporation. D) higher temperatures and more evaporation. Submit

Answers

I’m pretty sure the answer is letter d
I think it is D hope it helps

what is the realtionship between the kentic energy of molecules in an object and the objects tempeture

Answers

Temperature is a measure of the average kinetic energy of the particles in an object .Temperatures also measure how kinetic energy is not how hot or cold it is. It’s measuring what the amount of Kinetic Energy there when you throw something in the air and it comes back down

Which of the following changes the solid Earth the most?

Answers

the rock cycle changes the solid earth the most
Answer - Rock Cylcle Changes The Earth The Most !

What is the frequency of a wave?

A the distance traveled by the wave during one full cycle

B. The distance from the beginning to the end of a cycle

C. The amount of cycles that occur in a given time

D. the amount of time that one full cycle takes

Answers

I believe the answer is B. The definition of frequency of a wave talks about the number of times a wave occurs within that second.

The frequency of a wave is the distance from the beginning to the end of a cycle. Therefore, option B is correct.

What do you mean by the term frequency ?

Frequency is measured in hertz and is defined as the quantity of oscillations of a wave per unit of time (Hz).

The equation f = vλ , where is the wavelength in metres and v is the wave speed in m/s, may be used to determine the frequency of a wave if the wavelength and speed of the wave are known.

The quantity of waves that pass a set location in a predetermined period of time is known as frequency. Hence, if a wave passes through in half a second, the frequency is 2 per second. The frequency is 100 times per hour if it takes 1/100 of an hour.

Thus, option B is correct.

To learn more about the frequency, follow the link;

https://brainly.com/question/5102661

#SPJ2

Atoms sometimes form bonds to



A. Lose energy
B. Become more stable
C. Give away neutrons
D. Give away protons

Answers

d, give away protons

make me brainliest

Atoms sometimes form bonds to become more stable. Option B is correct.

The stability of atoms is determined by the arrangement and distribution of electrons in their energy levels or electron shells. Atoms tend to have the most stable configuration when their outermost electron shell is filled with electrons, either by gaining, losing, or sharing electrons with other atoms.

In the process of bond formation, atoms interact with each other and undergo a redistribution of electrons. This redistribution allows atoms to achieve a more favorable electron configuration, often resembling that of a noble gas with a full outer electron shell.

By forming chemical bonds, atoms can fill or empty their outermost electron shells, which increases the stability of the entire system. The resulting stability is driven by the decrease in potential energy associated with achieving a more favorable electron configuration.

Hence, B. is the correct option.

To know more about Atoms here

https://brainly.com/question/1566330

#SPJ6

PLEASE HELP! GIVING 22 POINTS!

PLEASE GIVE 2-3 SENTENCES!

An organism has the scientific name Canis lupus. Based on your knowledge of taxonomic categories explain how it is similar to and dissimilar from another organism, Canis latrans.

Answers

Differences-
Canis latrans (Coyte) is smaller than Canis lupus (Gray Wolf).
Similarities-
They are both canines and carnivorous.
Hope this helped!
~Wolfe<3

Answer:Differences are that Canis latrans/'Coyte' is smaller than Canis lupus/'Gray Wolf'. and the similarities are both canines and carnivorous

Explanation:

Other Questions
The treaty of guadalupe hidalgo and the gadsden purchase increased the area of the united states by _____. The base of a parallelogram is 24 inches longer than three times the height. The area of the parallelogram is 384 square inches. What is the height?The height is x = ________ inches. Scott viewed 72 classic cars at a car show.Of the cars he viewed,3/8 were sports cars. How many sports cars did Scott view Why did the antifederalists object to ratification of the constitution?a. they thought states would become too powerful.b. they claimed the constitution too strictly separated legislative power from executive power.c. they feared the constitution would prove a threat to the states and to individual rights.d. they thought the federal government should be stronger? What is the slope of a line that is perpendicular to the line shown?(3, 3) (-3, -1) Helen's physical appearance does not make her stand out, but her high spirits and (select a word) demeanor make her captivating and appealing. Shall I compare thee to a summer's day?Thou art more lovely and more temperate:Rough winds do shake the darling buds of May,And summer's lease hath all too short a date"Sonnet 18,"William ShakespeareWhat tone should the speaker use to recite this poem?confused and unsuresincere and romanticsilly and humorousangry and hurt In A Midsummer Night's Dream, who is the queen of the fairies? Peter is inarticulate when Mr. Dussel teases him about his cat. Why is he inarticulate? Find the equation for the line that passes through the point (1, 3), and that is perpendicular to the line with the equation 3x 4y = 13. Adventure Play sells an mp3 player for $18.00 and charges $3.25 per song. King Music sells a player for $23.00 and charges $2.00 per song. For how many songs will the cost be the same? Explain why regular system cleanup is vital to ensuring the operating system runs efficiently. You are the triage nurse in the emergency department (ed) when a grandfather carries his 4-year-old grandson into the ed. the child is not breathing, and the grandfather states the boy was stung by a bee just outside the ed where they were waiting for the mother to get off work. what characteristics of anaphylactic shock would lead you to believe this is what is happening to the patient? 4/15 divided by 8/25 What is the constant of proportionality in the equation 2y=6x Which of the following processes requires a physical medium (a solid, liquid, or gas) to transfer thermal energy from one object to another? I. conductionII. convectionIII. radiationA. I and III onlyB.I and II onlyC. III onlyD. II onlyE. none of these require a physical medium to transfer thermal energy. Why is it important to cook foods at a high enough temperature? Which days can be selected as the first day of the week for a calendar? A virtual image produced by a lens is always A. located in the back of the lens. B. smaller than the object. C. larger than the object. D. located in front of the lens. A machine can produce 27 inches of ribbon in 3 minutes.how much ribbon can the machine produce in 1 hour produce in 1 hour?