David would like to send a letter to more than one hundred people. He would like the letter to have names and addresses inserted in the text. David should create a _____.

graph

data entry form

report

form letter

​

Answer:Color resolution refers to the ability of each pixel to represent a number of color tones (also called color depth or bit depth). Color resolution is normally measured by the level of ability to express the intensity of the 3 primary colors (red, green, and blue).

Explanation:

Answer:

Largest size for image for web is between 1500px and 2400px width.

Explanation:

The best image size for web is between 1500px and 2400px in width.An image lower than 1500px will appear blurry and less color accurate with more noise.An Image higher than 2400px will be very good in quality and appearance but will negatively effect page load time of website which will result in overall bad experience.

Answer:

20k

Explanation:

Answers are

1 C

2 false

3 B

4 D

5 True

6 7 and 8 I don't know

9 is false

10 A

Answer:

Decoding is the technique used to convert an electrical signal into an understandable message. This process is used in receiver side.

Explanation:

In telecommunication, Decoder is used to to interpret the message sent by transmitter in to an understandable message. This process is called decoding

Answer:

Value of a is [tex]2/3[/tex]

Explanation:

A binary operator is an operator that is applied to two or more operand like Subtract(-),Add(+),Multiply(x),Divide([tex]/[/tex]).

To find possible values of a

replace * with 'x' multiply operator in the provided operation.

so now the expressions in [tex]axb=ab\\2a=2-a[/tex]

[tex]2a + a = 2\\3a =2\\a=2/3[/tex]

So the possible value for a is [tex]2/3[/tex]

Answer:

Usb Type-C gen 2.It's speed is 10Gb/s.

Explanation:

Fastest connection available for an backup hard drive is usb Tape-C gen 2.It provides data transfer speed of 10Gbits/sec at full duplex.They can be identified as a super speed plus logo.The speed of backup drive also depends upon storage type.An SSD based backup drive will be faster than a legacy HDD based storage device.

Answer:

The fastest connection used is Thunderbolt 3

Explanation:

most recent computer have inbuilt varieties of  ports and connection types. a typical desktop or laptop have all or some these connections :

Thunderbolt can transfer at the speed of up to 40 Gbps making it the connection with the fastest transfer speed. it is been incorporated into the Mac series of computers produced by the Apple inc. this technology was deployed by Intel and it can be found in recent Mac books

Answer:

Redundant

Explanation:

A redundant system is one in which you duplicate functions in order to improve the reliability and availability of a system. The system acts as a backup in case of a failure reducing downtime.This can be seen implemented in a network infrastructure where alternative network paths are available in case the primary route fails An example is the Fibre Distributed Data Interface (FDDI) that has a dual ring configuration, with one of the rings being redundant and used as an alternative connection when the primary ring fails.

Answer:

(A) Selecting Normal from the Quick Styles Gallery

(B) Expanding the Quick Styles Gallery and select Normal

(C) Pressing CTRL+SHIFT+N

(D) All of the above

Answer is D.

Explanation:

Answer is D. You can select Normal from the quick style Gallery. Expand the quick style Gallery and Select the Normal. Or you can select the CTRL+Shift +N.

Hence, all of the given options are correct and you can select any of them for the above purpose, and hence the correct answer is D. All of the above.

Final answer:

To revert text to the Normal style in Word 2016, select the text, go to the Home tab, and in the Styles group, click on the Normal style. For removing direct formatting, use the Clear Formatting button.

Explanation:

To revert a line of text to the Normal style in Word 2016, Abdul can follow these steps:

If he wants to remove any direct formatting (formatting not tied to a style), he can use the Clear Formatting button in the Styles group. This will remove any formatting that was applied directly to the text, such as bold or italics, and revert it to the default formatting of the Normal style.

Answer:

Packaging means the style of designing the package like containers, wrappers etc.And it plays an important role in ensuring the success of marketing as well as prevent failure like of various products such as for non durable products. It provides the protection to each of the product, and it also safeguards the tools for promotions. And the product can be software or hardware.The packaging requirements differs with type of product. Like we need encryption, and various cryptographic tools for software, and we need to ensure packaging safety for hardware.

Explanation:

Packaging means the style of designing the package like containers, wrappers etc.And it plays an important role in ensuring the success of marketing as well as prevent failure like of various products such as for non durable products. It provides the protection to each of the product, and it also safeguards the tools for promotions. And the product can be software or hardware.The packaging requirements differs with type of product. Like we need encryption, and various cryptographic tools for software, and we need to ensure packaging safety for hardware.

Through packaging we get the information like brand type, and product brief description. The decryption process in case of the software is also being provided. And if the product is a consumer product, we come to know the standard of the company and how caring they are. We come to know through packaging how good a company is, and how much they care for their customers. However, the main thing is how to get out the main product out of it.  

Final answer:

The list includes six machines with different sources of energy and varying purposes. Electricity-powered machines often have computers, while manual machines do not. Machines use energy to perform diverse functions.

Explanation:

Here is a list of six machines, including both electric and non-electric:

In summary, machines use energy in various forms to perform their functions. The energy comes from different sources, such as electricity or human effort, and some machines may have built in computers to assist with their operation.

Answer:

This is the case of redundancy or the repeated data. It means that the same data is being repeated again and again. And its the wastage of time and memory both. The redundancy must be removed in all circumstances. However, we cannot as without it proper normalization of data is not possible.

Explanation:

The answer is self explanatory.

Having abbreviated information on slides and then extrapolating during your presentation allows you to focus on your audience, enhance your delivery, leverage visuals effectively, and create a more impactful and memorable presentation experience.

There are several reasons why it's ideal to have abbreviated information on your slides and then extrapolate during your presentation:

Focus on the audience:

Limited attention spans: Slides crammed with text can overwhelm viewers and make it hard to follow.

Active listening: By prompting questions and encouraging reflection with concise slides, you encourage active listening and engagement rather than passive reading.

Enhance your delivery:

Confidence and engagement: Speaking confidently and elaborating on concise points allows you to connect with your audience and deliver a more impactful presentation.

Storytelling and explanation: Extrapolation allows you to weave a narrative around the key points, providing context, examples, and deeper insights that resonate with the audience.

In summary, having abbreviated information on slides and then extrapolating during your presentation allows you to focus on your audience, enhance your delivery, leverage visuals effectively, and create a more impactful and memorable presentation experience.

Final answer:

The slides in a presentation should succinctly present key information which is then elaborated upon by the speaker, in line with the short-to-long principle that improves communication clarity and retention for the audience.

Explanation:

The statement 'ideally, your information is abbreviated on the slides and then extrapolated during the presentation' is true because it aligns with effective presentation practices. In a presentation, slides should serve as a visual aid, presenting key points and concepts in a clear and concise form to facilitate understanding. During the actual presentation, the speaker should then extrapolate on these points, providing further explanation, examples, and details that can't be fully captured on the slides themselves.

This approach helps to maintain the audience's attention and interest and ensures that the presentation is engaging and informative. The short-to-long principle, as illustrated in the provided examples, also reinforces this concept by showing that starting with concise information and then expanding upon it makes for fluid, easy-to-understand, and memorable communication.

Answer:

Cache memory

Explanation:

Cache memory stores data temporarily before it went to the hard disk. During times where the user is doing something in the computer but has not clicked the save button yet, it will not be transferred to any storage devices. But the work is still there. You can see the document or images on your screen. The memory that saves it is called cache. But cache memory is not permanent. Meaning to say, the moment of a sudden power off, all data in the cache will be wiped out. Why cache memory? Since data stored in there are not permanent, it is faster (or highspeed). Once that it is transferred to a permanent storage like the hard disk, data retrieval will be a bit slower as data needs to be stored in allocated space and arrangement.

Answer:

supplier

Explanation:

Answer:

supplier

Explanation:

Answer:

In order to insert text into a presentation, you add a text box from the insert menu. However, this could differ based on the software you are using. Hope this helps!

Answer:

yes indeed it is yes

Explanation:

Answer:

B

Explanation:

B because:

OPSEC protects critical information and not attempt to protect unclassified ones. Its purpose is to bring about the reduction in the vulnerabilities of the U.S. and various multinational forces from all sorts of positive enemy exploitation of the information which is of serious nature and very important.

Answer:

D. SaaS

Explanation:

Answer:electromagnetic pulse

Explanation:

Answer: E light

Explanation:

Answer:

add, edit, filter names you have created

Explanation:

edg

Answer:

D

Explanation:

"Itself accurately controls the exposure in the image"

Automatic Exposure Bracketing

Final answer:

The phenomenon where a camera controls the exposure is called Programme Auto, where it selects the ISO, shutter speed, and aperture. Aperture Priority and Shutter Speed Priority are semi-automated modes where the photographer has more control over certain settings.

Explanation:

The phenomenon when a camera itself accurately controls the exposure in the image is known as Programme Auto. This mode is fully automated, where the camera selects the ISO setting, the shutter speed, and the aperture to achieve the correct exposure.

Unlike Aperture Priority and Shutter Speed Priority, which semi-automate the exposure settings, Programme Auto makes all decisions for the photographer, ensuring an optimal exposure for the given conditions.

In Aperture Priority mode, you select the ISO and the aperture, and the camera selects the correct shutter speed. In Shutter Speed Priority, you select the ISO and shutter speed, while the camera selects the aperture.

A variable representing the force applied to a crankshaft could use the identifier "crankshaftForce" or "appliedForce".

A variable representing the number of images could use the identifier "numImages" or "imageCount".

A class representing delivery trucks could use the identifier "DeliveryTruck" or "TruckDelivery".

A constant representing the golden ratio could use the identifier "GOLDEN_RATIO" or "goldenRatio".

A method reporting annual earnings could use the identifier "reportAnnualEarnings" or "annualEarningsReport".

When choosing identifiers, it's important to follow standard naming conventions to ensure that your code is easy to read and understand by other developers.

Some general naming conventions include using camel case for variable and method names (e.g. myVariableName), and using uppercase for constants (e.g. MY_CONSTANT).

Read more about naming conventions here:

https://brainly.com/question/29638342

#SPJ1

Answer:

f(x) = 4x -1

Consider the scenario when f(x) =0,

4x-1=0

x=1/4

Hence when x is more than 1/4, f(x) will be more than 0. This can be observed too by drawing a linear graph.

Explanation:

Answer:

D). Choose the correct sort field

Explanation:

You can arrange in descending, or you can arrange in ascending. And C, has nothing to do with this requirement. You don't have this option available with you. Select the option, "My list has header row" is not available to us. And clearly, you need to choose the best sort field first. And then you can arrange or sort accordingly.

Answer:

d

Explanation:

Final answer:

Cecilia could add the email command to the Quick Access Toolbar to expedite sending presentations to her colleagues. This tool is customizable and crucial for efficient workflow and professional email etiquette, including previewing presentations before sharing.

Explanation:

If Cecilia frequently sends a presentation via email to her colleagues, she could add this command to the Quick Access Toolbar to save time. The Quick Access Toolbar in programs like Microsoft PowerPoint allows users to add their most used commands for easy access. Adding a command to send an email directly from the presentation software could streamline Cecilia's workflow, ensuring that she can distribute her presentations more efficiently without navigating through multiple menus.

In professional settings, it's essential to maintain effective communication when working with colleagues. Copying the entire team on relevant correspondence by using the CC function ensures everyone is informed. However, one should use the 'Reply All' function selectively to avoid cluttering inboxes with unnecessary responses. Techniques like adding a clear and concise subject line, and proofreading emails before sending contribute to enhanced email etiquette and should be practiced diligently.

Moreover, it is recommended to add frequently used commands like Print Preview to the Quick Access Toolbar. This allows for reviewing the presentation's accuracy and organization before sending it to colleagues or clients, which is a crucial step to ensure the information is conveyed as intended.

Answer:

x = a

y = b

Explanation:

list a is  ['m', 'r', 'y']x = a

to assign list to another variable , need to initialise new variable and assign that variable to list a

where a = ['m', 'r', 'y']

now  x = ['m', 'r', 'y']

Similarly,

b = ['e', 'r', '!']

y = b

y = ['e', 'r', '!']

Answer:

Karel's World  contains horizontal streets (running east-west) and vertical avenues (running north-south). can contain interior wall sections that are positioned between adjacent street corners and prevent Karel from moving directly between these street corners.

Answer:

Microsoft Word has five types of views for a document, and there are a different set of advantages with each of them. There is a full-screen reading option, print layout, web layout, Draft and the Outline, and you can find what purpose they server through their name. And you can change the views of a document in two ways. You can either hit the View tab or you can select a certain view from the View tab. Or you can make use of the view button which is next to the zoom slider, which you can see at the bottom right section of the work space. Let's have a look at each of them now.

Explanation:

Microsoft Word has five types of views for a document, and there are a different set of advantages with each of them. There is a full-screen reading option, print layout, web layout, Draft and the Outline, and you can find what purpose they server through their name. And you can change the views of a document in two ways. You can either hit the View tab or you can select a certain view from the View tab. Or you can make use of the view button which is next to the zoom slider, which you can see at the bottom right section of the work space. Let's have a look at each of them now.

Word Views

The Print Layout View

Its the default one, and you will find this one as you open the document. It's best when you are documenting with things such as images, footers, columns headers, etc. And each of the components is going to be visible. You will hence get a view of documents, and how it looks like as per the page breaks.

The full-screen reading view is for reading purposes. It also shows how a printed page will look like.

Web Layout View

This gives us a view of how the document will look like on the web page. And the text gets wrapped to fit into the view if required.

Outline View

This helps when you want to move the sections in your documents, or if you are creating an outline.

Draft View

This will help you to quickly edit the text with the document being opened as a draft, and the headers and footers cannot be viewed in this view.

Answer:

Microsoft Word has five types of views for a document, and there are a different set of advantages with each of them. There is a full-screen reading option, print layout, web layout, Draft and the Outline, and you can find what purpose they server through their name. And you can change the views of a document in two ways. You can either hit the View tab or you can select a certain view from the View tab. Or you can make use of the view button which is next to the zoom slider, which you can see at the bottom right section of the work space. Let's have a look at each of them now.

Explanation:

Microsoft Word has five types of views for a document, and there are a different set of advantages with each of them. There is a full-screen reading option, print layout, web layout, Draft and the Outline, and you can find what purpose they server through their name. And you can change the views of a document in two ways. You can either hit the View tab or you can select a certain view from the View tab. Or you can make use of the view button which is next to the zoom slider, which you can see at the bottom right section of the work space. Let's have a look at each of them now.

Word Views

The Print Layout View

Its the default one, and you will find this one as you open the document. It's best when you are documenting with things such as images, footers, columns headers, etc. And each of the components is going to be visible. You will hence get a view of documents, and how it looks like as per the page breaks.

The full-screen reading view is for reading purposes. It also shows how a printed page will look like.

Web Layout View

This gives us a view of how the document will look like on the web page. And the text gets wrapped to fit into the view if required.

Outline View

This helps when you want to move the sections in your documents, or if you are creating an outline.

Draft View

This will help you to quickly edit the text with the document being opened as a draft, and the headers and footers cannot be viewed in this view.

Explanation:

Answer:

keep lines together option

Explanation:

In Ms word keep lines together option keeps paragraph together.To enable this option do the following steps

Right-click the heading.

From the context menu, choose Paragraph option.

Click the Line and Page Break tab.

In the Pagination section of Line and page Break tab , check the Keep Lines Together option.

Click Ok.

Answer: CCC

Explanation:

Lookup the isalpha() function in the C standard library, this function will check and return non-zero for alphabetic characters.

Answer:

In a web browser, the address bar (also location bar or URL bar) is a GUI widget that shows the current URL. The user can type a URL into the bar to navigate to a chosen website.