Thermoelectric generator is the method by which an electrical potential developed in generators and thermocouple.
Explanation:
A thermoelectric generator (TEG), is otherwise known as a Seebeck generator, it is a solid-state device that directly converts heat flux into electrical power by a phenomenon called a Seebeck effect.Thermoelectric generators operate like heat engines except they are less voluminous and have no movable parts. TEGs are therefore usually more costly and competitive and it's efficient is less.Thermoelectric generators may be used in power plants to transform excess heat into extra electrical power, and in machines to improve fuel efficiency.Answer:
Electric generators develop an electric potential via magnetic induction. Moving a conducting rod through a magnetic field that exists between the poles of a horseshoe magnet causes an electric potential to be set up in the rod. Free electrons move through this rod from one end to the other for as long as movement of the rod is maintained. The direction of this movement depends on whether the rod is moved across the lines of force in the magnetic field in either the opposite direction or the same direction. Generators usually consist of multiple conductors mounted on a cylinder that rotates in a magnetic field.
Thermocouples utilize heat to develop an electric potential. Two strips of different metals are connected at one end to form a junction and the other ends are kept apart. A heat source is applied to the junction; this causes each metal strip’s temperature to rise at the junction. The free ends aren’t as hot and electric charges are produced at these free ends. Because the strips consist of different materials, there's a difference of potential between these free ends; when connected by a conducting wire, the electrons can move through the pathway. The voltage that's produced will become greater as the difference in temperature between the free ends and the junction increases.
Most of the volume (space occupied) of the atom is found in...
A: Nucleus
B: Electron Cloud
C: Nucleus and electron cloud have equal volumes
(Please help me I’m dying)
calculate the kinetic energy of a motorcycle mass 60kg travelling at a velocity of 40km/h.
Answer:
2400
Explanation:
In a grassland ecosystem, praying mantises catch and eat grasshoppers. However, there has been a significant decrease in the praying mantis population in recent years. How will this most likely affect the grasshopper population over time? The population will decrease because grasshoppers are the competition. The population will increase because grasshoppers are the prey. The population will increase because grasshoppers are the competition. The population will decrease because grasshoppers are the prey.
Answer:
The population will increase because grasshoppers are the prey.
Explanation:
If there has been a significant decrease in the praying mantis population in recent years. This most likely affect the grasshopper population over time by the population will increase because grasshoppers are the prey. If there is less praying mantis then grasshoppers won't be eaten as much so the population of the grasshoppers will thrive
Answer:
The population will increase because grasshoppers are the prey.
Explanation:
The energy in a battery is_____energy
O A. kinetic
O B. potential
OC. mechanical
OD. nuclear
Answer:
A charged battery that is NOT part of a circuit is an example of potential energy.
Differences in temperatures, the rotation of the earth, and the amount of water in the atmosphere
Answer:
I think the answer is the Earth's weather and climate system represent complex. Hope it helps!
Identify the number of atoms on the reactant side of the chemical equation.
Fe2O3 + 3H2 → 2Fe + 3H2O
There are blank Fe (iron) atoms.
There are blank O (oxygen) atoms.
There are blank H (hydrogen) atoms.
Answer:
The Correct Answer is: 2,3,and 6
Explanation:
There are
2
Fe (iron) atoms.
There are
3
O (oxygen) atoms.
There are
6
H (hydrogen) atoms.
Answer:
the photo says all da answers
A baboon pushes a 3.1 kg stone with 150 j of kinetic energy.
What is the stone’s speed?
The speed of the stone is 9.8 m/s
Explanation:
Given data,
Mass - 3 kg K.E 150-J
We have to find the speed of the stone
We have the formula
K.E =1/2 m× v ²
Rewrite the equation as
v= √ 2×K.E/m
v= √2 ×150/ 3.1
v=9.83 m/s
The speed of the stone is 9.8 m/s
A baboon pushes a 3.1 kg stone with 150 J of kinetic energy.
What is the stone’s speed?
Answer: 9.83
ordinary charges are usually very large and measured in coulombs
Explanation:
What is a coulomb?
The coulomb is defined as the quantity of charge that passes through the cross section of an electrical conductor carrying one ampere for one second.
Coulomb (symbolized C) is the standard unit of electric charge in the International System of Units (SI). It is a dimensionless quantity. A quantity of 1 C is equal to approximately 6.24 x 10^18
What is Newton's law of universal gravitation?
Answer: Newton's law of universal gravitation is usually stated that every particle attracts every other particle in the universe with a force which is directly proportional to the product of their masses and inversely proportional to the square of the distance between their centers
Answer:
Newton’s law of gravitation, statement that any particle of matter in the universe attracts any other with a force varying directly as the product of the masses and inversely as the square of the distance between them.
As the temperature increases, materials with
coefficients of linear
expansion increase a lot in size, while materials with small coefficients of
linear expansion increase a little in size,
Answer:large
Explanation:
As the temperature increases, materials with large coefficients of linear expansion increases a lot in size
A waitperson carrying a tray with a platter on it tips the tray at an angle of 12° below the horizontal. If the gravitational force on the platter is 5.0 N, what is the magnitude of the force parallel to the tray that tends to cause the platter to slide down the tray? (Disregard friction.)
a.
0.42 N
c.
4.9 N
b.
1.0 N
d.
5.0 N
Answer:
The answer is 1.0 N
Explanation:
inclination of tray=12^{\circ}
gravitational Force=5 N
Now this gravitational force has two component i.e.
5\sin \theta is parallel to the tray =1.039 N
5\cos \theta is perpendicular to the tray =4.890 N
The magnitude of the force parallel to the tray that tends to cause the platter to slide down is approximately 1.0 N.
Explanation:To determine the magnitude of the force parallel to the tray that tends to cause the platter to slide down, we need to find the component of the gravitational force that acts parallel to the tray. This can be done using trigonometry.
The component of the gravitational force parallel to the tray is given by the formula:
F_parallel = F_gravity * sin(theta)
Plugging in the given values:
F_parallel = 5.0 N * sin(12°)
Solving this equation, we find that the magnitude of the force parallel to the tray is approximately 1.0 N (option b).
Learn more about Force here:https://brainly.com/question/13191643
#SPJ2
What do the sounds of a basketball bouncing and a dog barking have in common?
A.Both require a medium to travel through.
B.Both require a human eardrum in order to be
heard.
C.Both have the same amplitude.
D.Both have the same frequency.
Answer:
I think that the answer is B
A 25 kg rock falls for 2.7 seconds. How many meters tall was the
building?
Assume no air resistance, answer using two place values
Answer:
35.72 m
Explanation:
Given:
v₀ = 0 m/s
a = 9.8 m/s²
t = 2.7 s
Find: Δx
Δx = v₀ t + ½ at²
Δx = (0 m/s) (2.7 s) + ½ (9.8 m/s²) (2.7 s)²
Δx = 35.72 m
Which of the following is a heterogeneous mixture?
A heterogeneous mixture is simply any mixture that is not uniform in composition - it's a non-uniform mixture of smaller constituent parts. ... You can find many examples of heterogeneous mixtures in solid, liquid and gaseous form throughout nature.
Answer: Pancake Batter
Explanation:
The picture below shows an asteroid and a comet.
Which of these statements best describes the difference between asteroids and
comets?
01) Asteroids were formed closer to the sun than comets.
O2) Comets were formed closer to the sun than asteroids.
O 3) Asteroids are formed of ice and comets are formed of gases.
O4) Comets are formed of ice and asteroids are formed of gases.
Answer:
01) Asteroids are formed closer to the sun than comets.
Explanation:
Majority of asteroids are present region between Jupiter and Mars while the comets are found away from the orbits of Pluto and Neptune.
Answer: Asteroids were formed closer to the sun than comets. Option 01 is correct.
It is given that the picture shows an asteroid and a comet.
It is required to find what is the difference between asteroids and comets.
Which of the statements best describes the difference between asteroids and comets?Both an asteroid and a comet were the early part of the solar system likely 4.5 billion years but an asteroid formed near to the sun where it is too warm for substance to remain in solid form.
On the other hand comets formed distantly from the sun and therefore the ices would not melt. Most of the asteroids orbiting the sun that can be found in the asteroid belt. also asteroids were hotter than the comets.
Thus, Asteroids were formed closer to the sun than comets.
Learn more about an asteroid and a comet here:
https://brainly.com/question/9476820
SPJ5
Hi:) I really need help with this, I’m so confused! :/
Metals tend to lose electrons to achieve a stable noble gas electronic configuration.
Do metals lose electrons to other metals
OR
Do metals lose electrons to non metals
Non-metals tend to gain electrons to achieve a stable noble gas electronic configuration
Do non metals gain electrons from other non- metals
OR
Do non-metals gain electrons from metals?
_____ is the frictional force needed to slow down an object in motion
Answer
gravity
Explanation:
In which situation will the lowest resistance occur?
A. thick wire and high temperature
B. thin wire and high temperature
C.thick wire and cold temperature
D.thin wire and low temperature
C. Thick wire and cold temperature.
Explanation:
The resistance of a wire is given by: R = (ρL)/A
where ρ is the resistivity of the material, L is the length of the wire, A is the cross-sectional area of the wire.
From the formula, we see that the thicker the wire, the larger A, therefore the smaller the resistivity. so, a thick wire will have lower resistivity.
Moreover, the resistance of a wire increases with the temperature. In fact, high temperatures mean more motion of the atoms/electrons inside the wire, so more resistance to the flow of current through it. Therefore, colder temperature means lower resistance.
So, the correct option is thick wire and cold temperature.
Answer:
C. Thick wire and cold temperature.
Explanation:
Economic growth as measured by gross domestic product does not really tell us much about citizens' general well-being. Consider the situations described here. All BUT ONE describes the results of economic growth and how it may possibly have a negative influence on citizens overall well bring.
A) Commuters traveling to work as well as traffic jams may increase as more people are driving to their jobs.
Eliminate
B) Appropriate housing for all citizens within the country, thereby reducing the number of homeless people living on the streets.
C) Increased need for food results in the growth of the agricultural industry and an increased use of pesticides and herbicides to produce food crops.
D) In North Dakota. the economy has doubled in the past 25 years thanks to the oil boom. Incomes have risen, but so have prices, traffic, crime, and housing shortages.
Answer:
b
i remember this question from when i had a test to take.
From the picture above, please list 3 long-term and 3 short-term impacts this natural disaster
would have in your community.
Answer:
Long terms:
-earth its self
-economy (money)
-death
Short term:
- dirty
-damage houses
- roofing
-electricity
Explanation:
What’s is inductive reasoning?
Answer:
got this on google and got it right
Explanation:
An example of inductive logic is, "The coin I pulled from the bag is a penny. ... Even if all of the premises are true in a statement, inductive reasoning allows for the conclusion to be false. Here's an example: "Harold is a grandfather. Harold is bald.
Inductive reasoning is when someone observes data, recognizes patterns within these observations, and then draws a conclusion on these observations that they found.
Let's look at an example.
A 12-oz. coke bottle exploded after an hour in the freezer.
A second 12-oz. coke bottle exploded after an hour in the freezer.
The reasoning that was used here was inductive reasoning.
Although we might want to test a few more 12-oz. coke bottles, we can tentatively conclude that all 12-oz. coke bottles will explode after an hour in the freezer.
Since were using oneservations and recognizing patterns to draw a
conclusion, our conclusion is based on inductive reasoning.
Kinetic Energy - What does it depend on?
Kinetic energy depends on both ___________________________.
Help!
Answer:
kinetic energy depends on both positive and negative energy
Explanation:
Answer:
Kinetic energy depends on both speed and time
Help please! Will give brainliest!!!
The pH scale is actually measuring the concentration of H+ ions in a solution. If there is a high concentration of H+ ions, then the pH of the solution will be
A. neutral
B. low
C. none of the above
D. high
As the car moves from point A , to point B, and finally to point C, the total energy of the car
A. decreases from point A to point B, then increases from point B to point C
B. increases from point A to point B, then decreases from point B to point C
C. stays the same, but is converted between potential and kinetic energy
D. is lost between points B and C
Answer: C
Explanation:
Energy stays the same, but there’s more kinetic energy the less it moves and mor kinetic energy the more it moves
The conservation of energy allows us to find the correct answer for how the change in mechanical energy is:
C. stays the same, but is converted between potential and kinetic energy.
The mechanical energy of bodies is the sum of the kinetic energy due to motion and the potential energies due to the configuration of the system.
If there is not friction in the system, that is, there are no dissipative forces, the mechanical energy must be conserved at all points, this is one of the important conservation laws of physics.
When applying this theorem to the case of the car moving, the energy is converted from potential to kinetic, on the path from A to B and is transformed from kinetic to potential on the path from B to C, but the total value of the mechanical energy remains constant.
Let's analyze the different claims:
A. False. The stable energy conservation theorem that must be constant at all points.
B. False. Must be constant.
C. True. According to the analysis, the mechanical energy is constant and transforms between potential and kinetic.
D. False. As there is no friction, the energy is not lost.
In conclusion using the conservation of energy we can find the correct answer for the transformation of mechanical energy is:
C. Stays the same, but is converted between potential and kinetic energy.
Learn more here: https://brainly.com/question/15172211
An object with a mass of 5.0 kg accelerates 8.0 m/s^2 when an unknown force is applied to it. What is the acceleration? (20 points)
Answer:
40N
Explanation:
F=ma
F= 5 × 8 = 40N
.......
Is it possible to use the scientific method to prove the resurrection of Jesus? *Need this ASAP*
Answer:
Explanation:The resurrection of Jesus is primarily a matter of religious faith based on historical accounts documented in religious texts and scriptures. While historical evidence, such as writings from that period or archaeological findings, can offer insights into the context and plausibility of events, proving or disproving a religious belief through the scientific method isn’t feasible.
As such, attempting to use the scientific method to prove the resurrection of Jesus may not yield definitive scientific conclusions due to the nature of the event and the limitations of scientific inquiry in matters of faith and historical events. Instead, discussions about the resurrection often involve theology, historical analysis, and personal beliefs.
a ball slows down as it rolls up hill this is an example of? neutral motion, relative velocity, positive acceleratio, negative acceleration
Answer: negative acceleration
Explanation:
Acceleration is speeding up, the ball is slowing down making it negative acceleration
Answer:
4th option
Explanation:
How many electrons are there in the third energy level?
Answer:
18 electrons
Explanation:
The third energy level of an atom can hold up to 18 electrons, spread across the 3s, 3p, and 3d subshells.
Explanation:The third energy level of an atom can hold a maximum of 18 electrons. This is due to the existence of three possible subshells in this energy level, namely 3s, 3p, and 3d. As per the electron configuration rule, an s subshell can hold 2 electrons, a p subshell can hold 6, and a d subshell can hold 10. Consequently, the third energy level, which comprises these three subshells, can collectively accommodate up to 18 electrons (2 from the s subshell, 6 from the p subshell, and 10 from the d subshell). Keep in mind, however, that the complete filling of all these subshells in the third energy level is not applicable to all elements, but rather depends on the specific electron configuration of the atom.Learn more about third energy level here:https://brainly.com/question/21326300
#SPJ12
Why do different stars have different life cycles
When a candle is lit, the wick burns, the wax melts, the candle changes shape, and the air
around the candle heats up. Which of the following is an example of a chemical change?
A. the wick burning
B. the wax melting
C. the candle changing shape
D. the air around the candle heating up
An example of the change in the chemical is option a. the wick burning.
What is a chemical change?A chemical change occurs at the time when the one chemical substance should be converted into one or more distinct substances like iron becoming rust.
It should arise via the chemical reaction process and the substance should contain different kind of properties since it contains the atoms and molecules are arranged in the different manner.
Learn more about chemical here: https://brainly.com/question/17989910