Determine the bond order from the molecular electron configurations. ( σ 1 s ) 2 ( σ 1 s * ) 2 ( σ 2 s ) 2 ( σ 2 s * ) 2 ( σ 2 p ) 2 ( π 2 p ) 4 ( π 2 p * ) 2 bond order: ( σ 1 s ) 2 ( σ 1 s * ) 2 ( σ 2 s ) 2 bond order:

Answer:

The balloon will occupy the volume of 2.91 L at 62.0 °C .

Explanation:

Using Charle's law  

[tex]\frac {V_1}{T_1}=\frac {V_2}{T_2}[/tex]

Given ,  

V₁ = 2.64 L

V₂ = ?

T₁ = 31.0 °C

T₂ = 62.0 °C  

The conversion of T( °C) to T(K) is shown below:

T(K) = T( °C) + 273.15  

So,  

T₁ = (31.0 + 273.15) K = 304.15 K  

T₂ = (62 + 273.15) K = 335.15 K  

Using above equation as:

[tex]\frac{2.64}{304.15}=\frac{V_2}{335.15}[/tex]

[tex]V_2=\frac{2.64\cdot \:335.15}{304.15}[/tex]

New volume = 2.91 L

The balloon will occupy the volume of 2.91 L at 62.0 °C .

Answer:

D. It is a chemical reaction because the total mass remains the same when new substances are formed.

Explanation:

A chemical reaction is represented by a chemical equation which show the reactant and products. Reactants are written on left side of arrow while products are written on right side. The number of atoms are remain same however arrangement of atoms is different on both side.

For example:

6H₂O + 6CO₂ + energy  →   C₆H₁₂O₆ + 6O₂

it is known from balanced chemical equation that 6 moles of carbon dioxide react with the six moles of water and created one mole of glucose and six mole of oxygen. The number of atoms are same on both side however arrangement of atoms is different.

While in case of nuclear reaction small change in mass take place.

Answer: D

Explanation: Just took the test

Answer:

1) Se2O5

2) I2O6

3)Zn3n2

4) Cr(HCO3)3

Explanation:

selenium pentaoxide (= also called diselenium pentoxide)

= Se2O5

⇒ Se = 78.97 g/mol

⇒ O = 16 g/mol

⇒ 2*78.97 + 5*16 = 237.94 g/mol

iodine trichloride

= I2O6

⇒ I = 126.9 g/mol

⇒ Cl = 35.45 g/mol

⇒ 2* 126.9 + 6 * 35.45 = 466.5 g/mol

zinc (1) nitride does not exist  (it's Zinc(ii)nitride

The oxidation number for zinc is always 2

Zn3n2

⇒ Zn = 65.38 g/mol

⇒ N = 14 g/mol

⇒3*65.38 + 2* 14 = 224.14 g/mol

chromium (III) bicarbonate

Cr(HCO3)3

⇒ Cr = 52 g/mol

⇒ H = 1.01 g/mol

⇒ C = 12 g/mol

⇒ O = 16 g/mol

52 + 3*1.01 + 3*12 + 6*16 = 235.03 g/mol

Answer:

Option B is the right one  0.83M

Explanation:

Molarity = Moles of solute/liters of solution

You should calculate the molar mass of NaCl firstly.

Molar mass NaCl = Molar mass Na + Molar mass Cl

Molar mass NaCl = 23 g/m + 35.45 g/m

Molar mass NaCl = 58.45 g/m

To know the moles we should divide grams / molar mass

97 g/ 58.45 g/m = 1.66 moles

This moles are in 2L of solution.

Molarity = mol/L

1.66 moles/2L = 0.83M

Answer:

there

Explanation:

Tick Volume Definition Tick volume is measuring every trade whether up or down and the volume that accompanies those trades for a given time period. If you are a day trader or a short term swing trader, tick volume analysis will assist you in sizing up the market on an intraday basis.

The volume by each small tick on a burette represents 0.05 mL.

A burette is a long, graduated tube with a stopcock at the bottom. It is used to measure small volumes of liquids, such as in titrations. The graduations on a burette are typically in milliliters (mL), and each small tick represents 0.05 mL.

This means that if you want to dispense 0.1 mL of liquid from a burette, you would need to dispense 2 small ticks.

The volume represented by each small tick may vary depending on the burette. It is always best to check the burette's calibration before using it to ensure that you are dispensing the correct volume of liquid.

Find out more on volume here: https://brainly.com/question/10977359

#SPJ6

8 alpha particles

4 beta particles

We are given;

We are required to determine the number of beta and alpha particles produced to complete the decay series.

In this case;

Neptunium-237 has an atomic number 93, while,

Thallium-205 has an atomic number 81.

Therefore;

²³⁷₉₃Np → x⁴₂He + y⁰₋₁e + ²⁰⁵₈₁Ti

We can get x and y

237 = 4x + y(0) + 205

237-205 = 4x

4x = 32

 x = 8

On the other hand;

93 = 2x + (-y) + 81

but x = 8

93 = 16 -y + 81

y = 4

Therefore, the complete decay equation is;

²³⁷₉₃Np → 8⁴₂He + 4⁰₋₁e + ²⁰⁵₈₁Ti

Thus, Neptunium-237 emits 8 alpha particles and 4 beta particles to become Thallium-205.

Answer: the product of this reaction is option B which is carbondioxide and water.

Explanation:A chemical reaction involves the process in which one or more substances, the reactants, are converted to one or more different substances, the products. In the equation above, methane and oxygen gas are the reactants while carbondioxide and water are d products.

Answer:B

Explanation:

co 2 is the same as carbon dioxide and H 20 stand for water.

Answer:

a. Follow proper canning techniques.

Explanation:  

Although home canning is a great way to preserve garden goods it can be very risky or even deadly if not done correctly and safely.

Beware! Your canned vegetables and fruits could cause botulism if home canning is not done the correct way!

Botulism is a rare but potentially deadly disease caused by a poison most commonly produced by a germ called Clostridium Botulinum. The germ can be found in soil and can grow, survive and produce a toxin in certain conditions, such as when food is improperly canned. The toxin can damage your nerves, paralyze you, and even cause death.

You cannot smell, see or taste botulinum toxin but putting even a small amount of food containing botulinum into your organism can be fatal.

Botulism is a medical emergency. If you or someone you know has symptoms of foodborne botulism, see your doctor or go to the emergency room immediately.

Some of the symptoms that may occur are: drooping eyelids, double and/or blurred vision, thick-feeling tongue, muscle weakness, dry mouth, difficulty swallowing, slurred speech etc.

Many cases of foodborne botulism have occurred  after people ate home-canned, preserved, or fermented foods that were contaminated with this toxin. The food was contaminated because it wasn’t  canned or processed  correctly.

You can take these steps to protect yourself, your family, and others when it comes to home-canned foods:

1. Use proper canning techniques by carefully following instructions for safe home canning in the USDA Complete Guide to Home Canning. Do not follow recipes and cookbooks that do not follow the steps in the USDA guide, even if you got these items from a trusted friend or family member.

2. Use the right equipment for the kind of foods that you are canning. Pressure canning is the only recommended method for canning low-acid foods. Foods with low acid content are the most common sources of home-canning related botulism cases. Low-acids foods include almost every vegetable, some fruits, milk, all meats, fish, and seafood. Do not use boiling water canners for low-acid foods because they will not protect against botulism.

3. Do not hesitate!  If there is any doubt if safe canning guidelines have been followed, do not eat the food. Home-canned and store-bought food might be contaminated with toxin or other harmful germs if  the container is leaking, bulging, or swollen;  the container looks damaged, cracked, or abnormal;  the container spurts liquid or foam when opened;  the food is discolored, moldy, or smells bad.

If the container or the food inside has any signs of contamination, throw it out! If any of the food spills, wipe up the spill using a solution of 1/4 cup bleach for each 2 cups of water.

Never taste food to determine if it is safe! Do not taste or eat food that is discolored, moldy, or smells bad. Do not taste or eat food from cans that are leaking, have bulges or are swollen, or look damaged, cracked, or abnormal. Do not taste or eat food from a can that spurted liquid or foam when it was opened.  

Final answer:

The best way to avoid botulinum toxin in home-canned foods is to follow proper canning techniques, specifically using a pressure canner to reach the necessary temperature to kill C. botulinum endospores, and boiling the food for 10 minutes before eating. The correct answer is a. Follow proper canning techniques.

Explanation:

The strategy that helps to ensure that your home-canned food does not contain the botulinum toxin is a. Follow proper canning techniques. This involves using a pressure canner to achieve the necessary temperature of 116 °C (240 °F) to kill C. botulinum endospores, as they can survive temperatures above the boiling point of water.

Furthermore, the Centers for Disease Control and Prevention (CDC) recommend boiling home-canned foods for about 10 minutes before consumption to denature any botulinum toxin that may be present.

Answer:

a)  cu2+ + 1Hg (l) 1Cl- equilibrium cu (s) + Hg2Cl2 (s)

b)  0.068 V.

Explanation:

A) Cu2+ + 2e- euilibrium cu (s)

 Hg2Cl2 + 2e- equilibrium 2Hg (l) + 1cl-

Cell Reaction: cu2+ + 1Hg (l) 1Cl- equilibrium cu (s) + Hg2Cl2 (s)

B) To calculate the cell voltage

E = E_o Cu2+/Cu - (0.05916 V / 2) log 1/Cu2+

putting values we get

 = 0.339V + (90.05916V/2)log(0.100) = 0.309V

 E_cell = E Cu2+/Cu - E SCE = 0.309 V - 0.241 V = 0.068V.

The half-reaction for the copper electrode in a copper sulfate solution is Cu(s) -> Cu2+(aq) + 2e-. However, you cannot calculate the cell voltage without additional information about the Calomel electrode's standard reduction potential.

The subject of this question is electrochemistry, which involves redox reactions and measurements of electrode potential.

(a) The half-reaction for the Cu electrode in your scenario, when the Cu wire is dipped into the CuSO4 solution, can be represented as follows: Cu (s) -> Cu2+ (aq) + 2e-. This reaction shows that copper metal (Copper in zero oxidation state) is being oxidized to Copper(II)(in +2 oxidation state) ions by losing 2 electrons.

For the cell voltage, we do not have sufficient information to calculate. To perform this calculation, we would also need the standard reduction potential for the Calomel electrode, or some other point of comparison.

https://brainly.com/question/31230589

#SPJ3

Answer:

A.) The Proton and the Neutron are the subatomic particles within the nucleus. The Proton has a positive charge, and the Neutron has a neutral charge.

B.) The subatomic particle that is found on the exterior of the atom is the Electron, which has a negative charge.

Explanation:

The atom's nucleus contains protons with a positive charge and neutrons with no charge. The region outside the nucleus, the electron cloud, contains the negatively charged electrons.

The nucleus of an atom contains two types of subatomic particles, protons and neutrons. Protons have a positive charge, represented as +1, while neutrons are neutral and have no charge.

The region outside the nucleus, known as the electron cloud, contains electrons. These subatomic particles carry a negative charge, represented as -1.

https://brainly.com/question/33054877

#SPJ2

Answer:

Ne, Ar, and Kr are gases at STP, unreactive, and are generally monatomic.

Explanation:

they are unreactive and monoatomic and thats why have a very low boiling point.

The correct answer is: They are gases at STP, unreactive, and are generally monatomic.

Neon (Ne), Argon (Ar), and Krypton (Kr) are all noble gases, which are elements in Group 18 of the periodic table. The properties of noble gases are well-known and include the following:

 1. State at STP (Standard Temperature and Pressure): At STP, all noble gases are in the gaseous state. This is because they have relatively low boiling points and exist as gases under normal conditions.

 2. Reactivity: Noble gases are known for their lack of reactivity. They have a full valence shell, which means they do not readily form chemical bonds with other elements. This makes them very stable and unreactive under most conditions.

 3. Atomicity: Noble gases are generally monatomic, meaning they consist of single atoms rather than molecules made up of two or more atoms. This is due to their stable electron configurations, which do not require sharing or transferring electrons to achieve stability.

Given these properties, the only option that accurately describes Ne, Ar, and Kr is that they are gases at STP, unreactive, and generally monatomic. The other options incorrectly describe either their state at STP, their reactivity, or their atomicity.

Answer:

599.26 grams of potassium sulfate will be produced.

Explanation:

[tex]Cr_2(SO_4)_3(aq)+2K_3PO_4(aq)\rightarrow 2CrPO_4(s)+3K_2SO_4(aq)[/tex]

Moles of chromium (III) sulfate = [tex]\frac{450 g}{392 g/mol}=1.1480 mol[/tex]

According to reaction, 1 mole of chromium (III) sulfate gives 3 moles of potassium sulfate.

Then 1.1480 moles of chromium (III) sulfate will give:

[tex]\frac{3}{1}\times 1.1480 mol=3.4440 mol[/tex]

Mass of 3.4440 moles of potassium sulfate:

= 3.4440 mol × 174 g/mol = 599.26 g

599.26 grams of potassium sulfate will be produced.

Answer:

True

Explanation:

Carbon dioxide is transported by the blood in the dissolved form. carbonic anhydrase is the enzyme which is a metalloenzyme having zinc at active site converts carbon dioxide into carbonic acid which dissolves in the blood.

Thus,  

H₂O (l) + CO₂ (g) ⇔ H⁺(aq) + HCO₃²⁻(aq)

The kidneys in the body help to control the acid base balance. The hydrogen ion secretion in the body leads to the generation and reabsorption of the bicarbonate ions to form carbon dioxide in order to nullify the effect of the acid generated and thus the pH of the blood is maintained.

Answer: ORGANIC ACIDS  

Explanation:

CAM PLANTS CARBOXYLATE ORGANICS ACIDS through the addition of  CO2 to PEP Carboxylase(  a phosphoenolpyruvate carboxylase enzyme present in the mesophyll cells of the cytoplasm in a green plant) to produce Oxaloacetate (organic compound).

CO2 + PEP  ⇒ C4H4O5 (oxaloacetate)

Oxaloacetate is then converted to a similar molecule, Malate (C4H6O5,  another form of organic compound) that can be transported in to the bundle-sheath cells. Malate enters the plasmodesmata and releases the CO2. The CO2 then fixed by rubisco and made into sugars via the Calvin cycle.

Answer:

The ion's sizes and their radius ratio.

Explanation:

Ionic compounds take the form of three dimentional arrays by alternating anions and cations in order to minimize the potential energy of the system by maximizing the attractive force between opposite charges.

The resultant geometric structures are known as crystal lattices and their arrangements depend on the ion's sizes and, since they are bound though electrostatic attraction, their radius ratio.

I hope you find this information useful and interesting! Good luck!

1) The number of negative ones (-1) would you need to balance out one positive 2 (+2) is;

Option C; Two negative ones balance out one positive two

2) The numbers that would be in the place of X and Y in   [tex]K_{X}Se_{Y}[/tex] is;

X = 2 and Y = 1

3) AB will be modified in order to show that they have this 3-to-2 ratio as;

Option B; A₃B₂.

4) The formula that will represent an ionic compound composed of Calcium and Iodide ions is; Option A; CaI₂

1) To balance out the ions, it means addition of them should be equal to zero. Thus, to balance out one positive two (+2) with negative 1 (-1), the expression is;

+2 + x(-1) = 0

2 - x = 0

x = 2

Thus, we need 2 negative ones to balance out one positive two.

2) We are told that potassium(K) forms ions with a charge of +1 and selenium (Se) forms ions with a charge of -2.

When two ions combine, the product element will have its'  subscript as the absolute value of the ion of its' sharing ion. Thus;

We will have; K₂Se₁

Comparing with [tex]K_{X}Se_{Y}[/tex], then; X = 2 and Y = 1

3) We are told that;

Ion A has a charge of +2 and Ion B has a charge of -3.

From the concept in answer 2 above, it means that the answer will be;

A₃B₂.

4) We are told that;

Calcium forms ions with a charge of +2. Iodine forms ions with a charge of -1. An ionic compound formed by both ions using the concept earlier used would give us; CaI₂

Read more at; https://brainly.com/question/13958302

Answer:

Sodium, potassium, calcium , magnesium etc

Explanation:

To determine the species which is being oxidized or reduced in a reaction, we make use of oxidation number. While oxidation involves electron loss, reduction involves electron gain. The specie which gain electrons is being reduced and thus experience a decrease in oxidation number and thus said to be the oxidizing agent. The species which lose electrons experience and increase in oxidation number and thus is the reducing agent.

There are some elements however which never get oxidized or reduced in the course of a chemical reaction. What we mean by this is that they neither get oxidized nor reduced but maintain the same original oxidation number.

Examples of these kind of elements include the groups 1 and 2 metals.

Answer:

BrCl3

Explanation:

BrCl3: This compound has a T- shaped molecular geometry. And the difference in electronegativity is  0.2 to be precise makes is  polar covalent compound.

CS2: Carbon sulphide is clearly a non polar compound because of the similar electronegativities of both carbon and sulphur.

SiF4: This molecule has Tetrahedral geometry. So, even though the difference in the electronegativity of Sulphur and Florine is high, the tetrahedral geometry makes it a non polar compound.

SO3:  This molecule has trigonal planer geomtry. Hence, again in this molecule the polarity is being equal and opposite is cancelled out.

Answer:

The polarity of the molecule is defined as ability of the molecule to attract water through hydrogen bonding. Polarity of a molecule determines several characteristics of a substance. In the given examples, Bromine trichloride is a polar molecule.

Explanation:

Polarity of the substance or molecule is defined as the ability of a molecule to have electric dipole moment due to distribution of charges. In the given examples:

1. Bromine trichloride has a T-shaped geometry and the difference in electronegativity is 0.2. It has two lone pairs due to which the shape of molecule is bent.

2. Carbon sulphide is a non-polar molecule because of the symmetric shape having no electric dipole moment.

3. The tetrahedral geometry and symmetry of silicon tetrafluoride molecule provides the non-polar characteristic to the molecule. Silicon tetrafluoride have zero net dipole moment.

4. Sulphur trioxide is a non-polar molecule, which have trigonal planar geometry. The polarity of the molecule is cancelled out, which makes it to have zero dipole moment. Thus, it is a non-polar molecule.

For Further Reference:

https://brainly.com/question/9867336?referrer=searchResults

Answer:

Hence neopentane will give only single monochlorination product.

Explanation:

see below

The statement of C5H12 isomer will give only a single monochlorination product is "neopentane."

Monochlorination is the process of replacing one of the hydrogen atoms in an alkane with a chlorine atom. This is accomplished by chlorinating the alkane in the presence of UV radiation. The chlorine molecule splits into chlorine free radicals under these conditions. A monochlorination product is a chemical with two chlorine atoms in it.

Only one monochloroderivative is produced by the C5H12 isomer, implying that all hydrogen is equal. It's got to be neopentane. As a result, neopentane is the sole chemical that produces only one monochlorination product when chlorinated in the presence of sunlight.

Hence the correct option is neopentane.

Learn more about monochlorination here

https://brainly.com/question/14102178

#SPJ2

Explanation:

Let us assume that total mass of the solution is 100 g. And, as it is given that acetic acid solution is 12% by mass which means that mass of acetic acid is 12 g and 88 g is the water.

Now, calculate the number of moles of acetic acid as its molar mass is 60 g/mol.

    No. of moles = [tex]\frac{mass}{\text{molar mass}}[/tex]

                           = [tex]\frac{12 g}{60 g/mol}[/tex]

                           = 0.2 mol

Molarity of acetic acid is calculated as follows.

              Density = [tex]\frac{mass}{volume}[/tex]

                 1 g/ml = [tex]\frac{100 g}{volume}[/tex]

                    volume = 100 ml

Hence, molarity = [tex]\frac{\text{no. of moles}}{volume}[/tex]

                           = [tex]\frac{0.2 mol}{0.1 L}[/tex]

                           = 2 mol/l

As reaction equation for the given reaction is as follows.

     [tex]NaOH + CH_{3}COOH \rightarrow CH_{3}COONa + H_{2}O[/tex]

So,          moles of NaOH = moles of acetic acid

Let us suppose that moles of NaOH are "x".

          [tex]x \times 1 M = 10 mL \times 2 M[/tex]     (as 1 L = 1000 ml)

                        x = 20 L

Thus, we can conclude that volume of NaOH required is 20 ml.                    

Answer:

D. Changing ozone to oxygen gas

Explanation:

As a rule of thumb, it is always noting that making putting a substance through physical changes like melting or boiling, evaporating involves breaking intermolecular bonds. On the other hand, making a substance undergo chemical changes involves breaking intramolecular bonds like ionic bonds and covalent bonds.

Oxygen being changed from ozone to oxygen is a chemical change and therefore requires breaking of the oxygen-oxygen double bonds

Final answer:

Breaking covalent bonds is necessary in changing ozone to oxygen gas, while the other processes listed involve overcoming intermolecular forces.

Explanation:

In the processes described, breaking covalent bonds is necessary when changing ozone (O3) to oxygen gas (O2). Melting mothballs, dissolving hydrogen bromide gas into water to form hydrobromic acid, and vaporizing ethyl alcohol involve overcoming intermolecular forces rather than breaking covalent bonds. The transition from ozone to oxygen involves an endothermic reaction breaking the O-O covalent bonds within the ozone molecule to form diatomic oxygen molecules.

Answer: D) 1.00 g

Explanation:

According to the Avogadro's law, the volume of gas is directly proportional to the number of moles of gas at same pressure and temperature. That means,

[tex]V\propto n[/tex]

or,

[tex]\frac{V_1}{V_2}=\frac{n_1}{n_2}[/tex]

where,

[tex]V_1[/tex] = initial volume of gas  = 2.00 L

[tex]V_2[/tex] = final volume of gas = 3.00 L

[tex]n_1[/tex] = initial moles of gas  =[tex]\frac{\text {Given mass of helium}}{\text {molar mass of helium}}=\frac{2.00g}{4g/mol}=0.500mol[/tex]

[tex]n_2[/tex] = final moles of gas  = ?

Now we put all the given values in this formula, we get

[tex]\frac{2.00L}{3.00L}=\frac{0.500mol}{n_2}[/tex]

[tex]n_2=0.75mole[/tex]

Mass of helium =[tex]moles\times {\text {molar mass}}=0.75\times 4=3.00g[/tex]

Thus mass of helium added = (3.00-2.00) g = 1.00 g

Answer:

827 mL

Explanation:

To answer this question we use the definition of Molarity:

Molarity = mol / L

[Cl⁻] = mol Cl⁻ / L

Now we calculate the moles of Cl⁻ present in 42.0 g of MgCl₂⋅6H₂O:

Molar mass of MgCl₂⋅6H₂O = 24.3 + 2*35.45 + 6*18 = 203.2 g/mol

moles of Cl⁻ = 42.0 g MgCl₂⋅6H₂O ÷ 203.2 g/mol * [tex]\frac{2molCl^{-}}{1molMgCl_{2}.6H_{2}O}[/tex] = 0.4134 mol Cl⁻

Finally we use the definition of molarity to calculate the volume:

0.500 M = 0.4134 mol Cl⁻ / xL

xL = 0.827 L =  827 mL

Answer:

(b) lose electrons and form positive ions

Explanation:

Ionic bonding:-

This type of bonding is formed when there is a complete transfer of electrons from one element to another element. In this bonding one element is always a metal and another is a non-metal.

For example, the formation of NaCl

The electronic configuration of sodium with Z = 11 is : 2, 8, 1

The electronic configuration of chlorine with Z = 17 is : 2, 8, 7

Thus, sodium loses one electron and become positively charged and chlorine accepts this electron and become negatively charged and they have both their octets complete and form ionic bond.

Hence, can be seen from the above example, metallic atoms generally lose electrons and form positive ions.

Answer:

An endothermic reaction has a positive ΔH, absorbs heat from the surroundings, and feels cold to the touch.

Explanation:

The enthalpy of reaction, ΔH, is the difference  between the enthalpies of the products and the enthalpies of the reactants:

[tex]ΔH = H(products) - H(reactants)[/tex]

The enthalpy of reaction can be positive or negative, depending on the process.

For an endothermic process (heat absorbed by the system from the surroundings), ΔH  is positive (that is, ΔH > 0).

For an exothermic process (heat released by the system  to the surroundings), ΔH is negative (that is, ΔH < 0).

An endothermic reaction absorbs heat from its environment, has a positive ΔH, and feels cold to touch. It occurs when more energy is required to break bonds in reactants than the energy released when new bonds form in products. In contrast, an exothermic reaction releases heat, thus feels warm, and has a negative ΔH.

An endothermic reaction is a type of chemical reaction that absorbs heat energy from the surroundings, hence it has a positive ΔH (enthalpy change). In simpler words, it requires more energy to break the bonds in the reactants than is released when new bonds form in the products. As a result, the reaction feels cold to the touch because heat is being drawn in from the environment. On the other hand, an exothermic reaction gives off heat to the surroundings, has a negative ΔH, and feels warm to the touch as it releases energy.

The enthalpy (ΔH), is a measure of the total energy of a thermodynamic system. It consists of the internal energy of the system plus the product of pressure and volume. The sign of ΔH can predict whether a reaction would be exothermic or endothermic.

For instance, the decomposition of dinitrogen tetroxide (N₂O4 (g) → 2NO₂ (g)) is an endothermic process, which means the reaction will absorb 57.20 kJ of heat from its surroundings. In contrast, the combustion reaction in an oxyacetylene torch is exothermic and releases energy in the form of heat and light.

https://brainly.com/question/28909381

#SPJ6

Answer:

True

Explanation:

Yes the given statement is true

Most of the carbon dioxide preset in the atmosphere is C12 isotope and a very small fraction of The atmosphere is made up by C14 isotope which is radioactive in nature

C14 makes about 1 to 1.5 atoms per [tex]10^{12}[/tex] atoms of carbon in the atmosphere.

Answer:

The entropy will be 0

Explanation:

Because of the third principle of thermodynamics, the entropy of a pure substance (such as SiC59), with finite density (we have 1 mol in a finite volume), at 0 K is equal to 0.

So, it really dosen't mather the Si atom, if you are analizing it at the absolute zero (0 K).

Answer:

Pb-210 that lead-210 is the product of second step.

Explanation:

Alpha decay : When a larger nuclei decays into smaller nuclei by releasing alpha particle. In this process, the mass number and atomic number is reduced by 4 and 2 units respectively.

General representation of alpha decay :

[tex]_Z^A\textrm{X}\rightarrow _{Z-2}^{A-4}Y+_2^4\alpha[/tex]

Beta decay : In this process, a neutron is converted into a proton and an electron. In this decay, the atomic number is increased by 1 unit.

General representation of beta decay :

[tex]_Z^A\textrm{X}\rightarrow _{Z+1}^{A}Y+_{-1}^0e[/tex]

Step 1. Bi undergoes α decay;

[tex]_Z^A\textrm{X}\rightarrow _{81}^{210}Tl+_2^4\alpha[/tex]

81 = Z-2

Z = 83

210 = A - 4

A = 214

[tex]_{83}^{214}\textrm{X}\rightarrow _{81}^{210}Tl+_2^4\alpha[/tex]

Step 2: Tl-210 undergoes β decay:

[tex]_{81}^{210}\textrm{X}\rightarrow _{82}^{210}Pb+_{-1}^0e[/tex]

Pb-210 that lead-210 is the product of second step.

Answer:

Carbonic anhydrase, H+K+ATPase

Explanation:

Within the parietal cells of the stomach CO2 and H2O are combined by carbonic anhydrase to produce H2CO3,which quickly dissociates into H+ and HCO3- .H+ ions are pumped into the lumen of stomach via a H+K+ATPase,while HCO3- is pumped into the blood in exchange for Cl- ,which ultimately enters the lumen of the stomach as well.

Answer:

Explanation:

Assuming temperature remains constant, we can use Boyle's law to solve this problem: P₁V₁=P₂V₂.

Once the two flasks are connected and the stopock opened, the total volume is:

Now we use Boyle's law twice, to calculate the new pressure of each gas:

P₂He = 276 torr

P₂Ar = 457 torr

Finally we calculate the total pressure, adding the partial pressures: