Dextrose 25% 1000 ml was ordered, you have only dextrose 70% solution available. how much of the dextrose 70% solution and sterile water will you use to fill this order?

Answers

Answer 1
For the purpose we will use solution dilution equation:
c1xV1=c2xV2
Where, c1 - concentration of stock solution; V1 - a volume of stock solution needed to make the new solution; c2 - final concentration of new solution; V2 - final volume of new solution.
c1 = 70%
c2 = 25%
V1 = ?
V2 = 1000 mL
When we plug values into the equation, we get following:
70 x V1 = 25 x 1000
V1 = 333.33 mL
V(H2O)=V2-V1= 1000-333.33=666.67 mL


Related Questions

The ksp of cadmium carbonate, cdco3, is 1.0 × 10-12. calculate the solubility of this compound in g/l.

Answers

Answer is: solubility of cadmium carbonate is 0,00017 g/L.
Cadmium carbonate in water: CdCO₃ → Cd²⁺ + CO₃²⁻.
[Cd²⁺] = [CO₃²⁻] = x.
Ksp = [Cd²⁺] · [CO₃²⁻].
10⁻¹² = x².
x= √10⁻¹².
x = [Cd²⁺] = [CO₃²⁻] = 10⁻⁶ mol/L.
[CdCO₃] = 10⁻⁶ mol/L.
n(CdCO₃) = 10⁻⁶ mol/L · 1 L = 10⁻⁶ mol.
m(CdCO₃) = n(CdCO₃) · M(CdCO₃).
m(CdCO₃) = 10⁻⁶ mol · 172,41 g/mol.
m(CdCO₃)  = 0,00017 g/L.

Final answer:

The solubility of cadmium carbonate, CdCO3, in a 0.010-M solution of cadmium bromide can be calculated using the compound's Ksp value. The molar solubility is found to be 1.0 × 10^-6 M. Converting this to grams per liter gives a solubility of 1.724 × 10^-4 g/L.

Explanation:

The solubility of cadmium carbonate, CdCO3, can be determined using the Ksp value. The Ksp value represents the product of the concentrations of the dissolved ions in a saturated solution. In this case, the Ksp of CdCO3 is 1.0 × 10^-12. Since the compound dissociates into Cd2+ and CO3^2- ions, the solubility can be calculated by assuming x as the molar solubility of CdCO3. Thus, [Cd2+] = x and [CO3^2-] = x. Plugging in these values into the Ksp expression, we get:

(x)(x) = 1.0 × 10^-12

x^2 = 1.0 × 10^-12

x = √(1.0 × 10^-12) = 1.0 × 10^-6 M

Since the question asks for the solubility in g/L, we need to convert the molar solubility to grams per liter. We can use the molar mass of CdCO3, which is approximately 172.4 g/mol. Therefore, 1.0 × 10^-6 M is equivalent to 1.724 × 10^-4 g/L.

Learn more about Calculating solubility of a compound here:

https://brainly.com/question/4529340

#SPJ11

A compound has the empirical formula CH2O. If the compound’s molecular mass is 180 g/mol, determine the molecular formula of the compound. Be sure to show your work.

Answers

The molecular formula will be a multiple of the empirical CH2O. One unit of CH2O has a mass of 12+2*1+16 = 30 g. This means that if our compound has a molecular mass of 180 g/mol, we can divide 180 / 30 = 6 units, and our compound has 6 units of CH2O. This means that its molecular formula is C6H12O6.

A rigid vessel at constant temperature initially contains 0.600 atm nitrogen gas and 0.600 atm hydrogen gas. if these gases react to form ammonia and the reaction goes to completion, which choice is closest to the final total pressure after the reaction?

Answers

The balanced reaction between nitrogen and hydrogen to form ammoinia is as shown.
 N2 + 3H2=2NH3 
Dividing everything by 3
1/3N2 +  H2 = 2/3NH3
All the hydrogen reacts with 1/3 of 0.5 atm of N2
The amount of product is 2/3 × 0.6 atm = 0.4 atm NH3
The unreacted nitrogen is 2/3 × 0.6 atm =0.4 atm Nitrogen
That adds up to 0.8 atm

The final total pressure after the completion of reaction is [tex]\boxed{0.8{\text{ atm}}}[/tex].

Further Explanation:

Stoichiometry:

The amountof species present in the reaction is determined with the help of stoichiometry by the relationship between reactants and products.

Balanced chemical reaction between nitrogen and hydrogen is as follows:

[tex]{{\text{N}}_{\text{2}}} + 3{{\text{H}}_2} \to 2{\text{N}}{{\text{H}}_{\text{3}}}[/tex]  

This balanced reaction’s stoichiometry clearly indicates that one mole of nitrogen reacts with three moles of hydrogen to produce two moles of ammonia.

Since pressure is directly related to number of moles of gas, pressure required by hydrogen to react with one mole of nitrogen should be three times of pressure of nitrogen.

Therefore pressure of hydrogen can be calculated as follows:

[tex]\begin{aligned}{\text{Pressure of hydrogen}} &= 3\left( {0.600{\text{ atm}}} \right) \\&= 1.8{\text{ atm}} \\\end{aligned}[/tex]  

But pressure of hydrogen in the rigid vessel is 0.600 atm only so it behaves as limiting reactant and its amount will govern the amount or quantity of product formed (ammonia).

Since the ratio of pressures of hydrogen and ammonia is 3:2, pressure of ammonia can be calculated as follows:

[tex]\begin{aligned}{\text{Pressure of ammonia}} &= \left( {\frac{2}{3}} \right)\left( {0.600{\text{ atm}}} \right) \\&= 0.4{\text{ atm}} \\\end{aligned}[/tex]  

Pressure of unreacted nitrogen can be calculated as follows:

[tex]\begin{aligned}{\text{Pressure of unreacted nitrogen}} &= \left( {\frac{2}{3}} \right)\left( {0.600{\text{ atm}}} \right) \\&= 0.4{\text{ atm}} \\\end{aligned}[/tex]  

Therefore total final pressure after the reaction can be calculated as follows:

[tex]\begin{aligned}{\text{Total final pressure}} &= \left( {0.4 + 0.4} \right){\text{ atm}} \\&= {\text{0}}{\text{.8 atm}} \\\end{aligned}[/tex]  

Learn more:

Calculate the moles of chlorine in 8 moles of carbon tetrachloride: https://brainly.com/question/3064603 Calculate the moles of ions in the solution: https://brainly.com/question/5950133

Answer details:

Grade: Senior School

Subject: Chemistry

Chapter: Mole concept

Keywords: stoichiometry, NH3, H2, N2, pressure, hydrogen, nitrogen, ammonia, 0.4 atm, 1.8 atm, 0.600 atm, 3H2, 2NH3, 0.8 atm.

When taking measurements, you must consider _____.
- accuracy, precision, and uncertainty
- only accuracy
- only precision
- only uncertainty

Answers

accuracy, precision, and uncertainty. Hope this helps!!
Hey there!

Your answer is the first option.
When taking measurements, you must consider all:
Accuracy, precision, and uncertainty.

Hope this helps you.
Have a great day!

In what three catagories can chemical reactions be classified

Answers

Synthesis, decomposition, replacement.

A carbon compound X turns blue litmus to red and has a molecular formula C2H4O2.Identify X and draw its structure.Write a chemical equation for the reaction and name of the product formed in each case when X reacts with
a. ethanol in the presence of conc.H2SO4 (
b. sodium carbonate

Answers

X is acetic acid or CH3COOH Acetic acid belongs to the homologous series; alkanoic acids; which are group of weak acids. They react with alkanols or alcohols to form esters or what we call alkyl alkanoates in presence of concentrated sulfuric acid. Additionally, they react with carbonates to yield a salt, water and carbon dioxide gas.
(a) Acetic acid reacts with ethanol to form ester in presence of concentrated sulphuric acid (H2SO4) CH3COOH + C2H5OH ----------------------> CH3COOC2H5 + H2O Product formed is Ethyl ethanoate or ethyl acetate.

(b) The reaction will be; Na2CO3 + 2CH3COOH ---------> 2CH3COONa + H2O + CO2 Effervescence will be observed due to the production of Carbon dioxide gas.

Answer: Substance X is ethanoic acid and the reactions are given below.

Explanation:

A compound having molecular formula of [tex]C_2H_4O_2[/tex] which turns blue litmus to red is considered as an acid.

The compound is ethanoic acid which is generally termed as acetic acid.

Thus, the compound X is acetic acid.

The chemical equations for the reaction of X with

a. Ethanol in the presence of [tex]H_2SO_4[/tex]

When acetic acid reacts with etahnol in the presence of an acid, it leads to the formation of a fruity smelling compound known as ester which is ethyl acetate.

[tex]CH_3COOH+CH_3CH_2OH\xrightarrow[]{H_2SO_4}CH_3COO-CH_2CH_3+H_2O[/tex]

b. Sodium carbonate

When acetic acid reacts with sodium carbonate, it leads to the formation of sodium acetate, carbon dioxide and water.

[tex]2CH_3COOH+Na_2CO_3\rightarrow 2CH_3COONa+CO_2+H_2O[/tex]

SUPER EASY!

12 POINTS

Choose all that apply.
Which of the following contribute to your body's digestive process?

muscle
movements
chemical reactions
physical processes
respiration

Answers

The answer is muscle,chemical reactions,respiration
hope this helps
wadewilson
Hey friend,

The answer is MUSCLE MOVEMENTS,RESPIRATION,CHEMICAL REACTION.

 MUSCLE MOVEMENTS
The food taken from mouth which goes to oesophagus then to stomach then to duodenum , jejunum , ilium , then to large intestine (caecum,colon,rectum)
then finally it excretes out 

Muscle movements helps in the passing of food from mouth to anus.

Basically the term is called Peristalsis .

So, the answer is MUSCLE MOVEMENTS.

RESPIRATION
It is the breakdown of oxidation of glucose to produce ATP.
Energy is needed by muscles to do work.

So, the answer is RESPIRATION.

CHEMICAL REACTION
Above we see respiration is also contribute to DIGESTION 
as respiration is a chemical process hence it also contribute to digestion 

So the answer can be CHEMICAL REACTION


HOpe this helps!!

Hydrazine (n2h4) is used as rocket fuels. it reacts with oxygen to form nitrogen and water. write the balanced equation for this reaction. n2h4 + o2 → n2 +2h2o how many liters of n2 at stp form when 100g of n2h4 reaction with 100g of o2? how many grams of the excess reagent remain after the reaction?

Answers

The answer is: volume of nitrogen is 70L.

Chemical reaction: N₂H₄ + O₂ → N₂ + 2H₂O.

m(N₂H₄) = 100 g; mass of hydrazine.

M(N₂H₄) = 32 g/mol; molar mass of hydrazine.

n(N₂H₄) = m(N₂H₄) ÷ M(N₂H₄).

n(N₂H₄) = 100 g ÷ 32 g/mol.

n(N₂H₄) = 3.125 mol; amount of hydrazine.

m(O₂) = 100 g; mass of oxygen.

M(O₂) = 32 g/mol; molar mass of oxygen.

n(O₂) = 100 g ÷ 32 g/mol.

n(O₂) = 3.125 mol; amount of oxygen.

From chemical reaction: n(O₂) : n(N₂) = 1 : 1; n(O₂) = n(N₂).

n(N₂) = 3.125 mol; amount og nitrogen gas.

V(N₂) = n(N₂) · Vm.

Vm = 22.4 L/mol; molar volume.

V(N₂) = 3.125 mol · 22.4 L/mol.

V(N₂) = 70 L.

There is not excess reagent, because hydrazine and oxygen are all used in chemical reaction.

In which medium would light have the longest wavelength? water air glass diamond

Answers

I think the correct answer is air! 

the answer is b air

Why does a blue shirt look blue? Choose the BEST explanation.

Question 2 options:

The shirt reflects all wavelengths of light.


All wavelengths of light are absorbed by the shirt.


The shirt absorbs the blue wavelengths.


The shirt reflects the blue wavelengths.

Answers

the answer is b. i believe

hope this helps!
The Blue shirt absorbs the blue wavelengths

In the diagram, above, marker D is pointing to a __________, which is a landform that forms when a river slows down as it flows into an ocean or lake. As the river slows, it drops its sediment load, gradually creating a network of small channels and islands.

Answers

When a river flows in an ocean or lake its called a Delta. Marker D is pointing to a Delta.

You need to measure the brightness of a light bulb using the metric system. In which unit do you express your measurement?

A. meter

B. liter

C. kilogram

D. candela

***My answer: D. Candela

because candela is the unit of light intensity...
idk if that applies here?? :) please explain!! thanks :)

Answers

Candela is the correct answer. In measuring the brightness or luminosity of the bulb and you want to use the metric system, candela is the unit to be used. You are correct that candela is the unit of light intensity. The term candela is the Latin for candle which signifies light. 

guyys .... please this is really urgent.....................short definition for sea breeze and land breeze.......10 points

Answers

Sea breeze: “A breeze blowing towards the land from the sea, mostly during daytime.”

Land breeze: “A breeze blowing towards the sea from the land, mostly at night.”

A sea breeze is a wind that blows from the sea to the warmer land during the day, while a land breeze blows from the land to the sea at night due to differences in temperature creating distinct pressure areas.

Land Breezes and Sea Breezes Defined

A sea breeze is a local wind pattern that occurs during the day or summer when the land heats up faster than the water. As a result, lower pressure forms over the land, drawing cooler, higher pressure air in from the sea towards the land to replace the rising warm air. Conversely, a land breeze occurs at night when the land cools down more quickly than the water, creating higher pressure over the land and lower pressure over the water.

This causes air to move from the land out towards the sea. Both phenomena are examples of land/sea breezes which occur due to differential heating and cooling of land and water, creating pressure gradients that drive local winds.

fast-moving glaciers that can move up to 6 kilometers per year.

Answers

Surging glaciers experience a significant increase in movement, moving at speeds much faster than the average glacier.

A glacial surge is a sudden increase in the speed of a glacier, often moving tens of meters per day, which is significantly faster than the typical glacier movement. Glaciers generally move by pseudo-plastic flow and their velocity is greatest at the surface, tapering off towards the base due to internal deformation and basal slipping. While average glacier speed is around 10 inches per day, surging glaciers can greatly exceed this, with some known to move up to 6 kilometers per year.

Notable examples of surging glaciers include the Hubbard Glacier, which in 1986 surged across the Russell fjord, and Greenland's fast-moving Jakobshavn glacier. Surging can be caused by various factors, but one believed to be significant is the buildup of water pressure beneath the glacier, which effectively 'floats' the ice, letting it slip over the bedrock. The presence of looped moraines on the glacier surface is a key indicator of a surging glacier.

What new inforamtion can you add the your definition of physical change?

Answers

More information is required to give a full answer.
A physical change is one in which a substance may change its form but still retain it's original chemical composition. An example of a physical change is a phase change where a substance changes from one phase (solid, liquid, gas) to another.
Using water as an example: As water changes from water vapor to liquid and freezes to ice, the chemical formula remains the same; H2O.

How many calories of heat energy are required to melt 20 grams of ice at 0 °c?

Answers

The latent heat of fusion of ice is 80 calories per gram. This means that if we have 20 grams of ice to be melted from solid to liquid at the freezing point of 0 degrees C, we find the total heat requirement by:
Q = m(Lf) = (20 g)(80 cal/g) = 1600 calories
So the total heat requirement is 1600 calories.

When atoms are split, from which part of the atom is the energy released?


nucleus


electrons


isotopes

Answers

The nucleus is the part of the atom where energy is released after said atom is split.

Hope this helped :3

Answer: Option (a) is the correct answer.

Explanation:

It is known that an atom consists of three sub-atomic particles which are protons, neutrons, and electrons.

When an atom splits then only neutrons and protons are involved and no electrons are involved into the reaction.

Hence, energy is released by the nucleus of the atom. And, these type of reactions reactions are known as nuclear reactions.

For example, [tex]^{16}_{8}O + ^{1}_{1}n \rightarrow ^{13}_{7}N + ^{4}_{2}He[/tex]

Whereas isotopes are the species which have same atomic number but different mass number.

Thus, we can conclude that when atoms are split, from nucleus of the atom is the energy released.

The solar system formed from the

A. grouping together of asteroids.
B. explosion of an interstellar sun.
C. collision of two massive stars.
D. collapse of an interstellar cloud.

Answers

Answer:
D. collapse of an interstellar cloud.

Explanation:
The formation of the solar system was explained based on the  Nebular Hypothesis. This hypothesis states that the explosion of the supernova resulted in the disturbance of a cloud of gas and dust in space which led to the formation of the solar system.

Hope this helps :)

Example 1: urea, (nh2)2co, is used in the manufacture of resins and glues. when 5.00 g of urea is dissolved in 250.0 ml of water (d = 1.00 g/ml) at 30.0 c, 27.6 kj of heat is absorbed. (specific heat of water 4.18 j/g.c) is the solution process exothermic? what is ? what is the final temperature of solution?

Answers

a) i believe the reaction is exothermic, because 27.6 kg of thermal energy is gained by the water solution, the dissolution of urea is exothermic. Exothermic reaction is a chemical reaction that releases energy by light or heat. It is the opposite of an endothermic reaction where heat is gained by the reaction.

b) The water gained the heat released when urea dissolve. That is the water gained 27.6 kJ, while dissolution of urea released 27.6 kJ. Therefore, the heat gained is equal to the heat lost.

c) From part B, since heat gained is equal to heal lost, then
250 g × (Tf -30) ×4.18 J/g = 27600 J
 = 1045 Tf - 31350J = 27600 J
Tf = 56.41°C.
Therefore the final temperature  of the solution is 56.41°C

d) The initial and final temperature in Fahrenheit
°F = °C × (9/5) +32,
Thus, 30°C will be equal to 86° F
while 56.41 will be equivalent to  133.54 ° F


trampoline and playground

Part a use valence bond theory to devise a hybridization and bonding scheme for co2. match the words in the left column to the appropriate blanks in the sentences on the right. make certain each sentence is complete before submitting your answer.

Answers

Q1)
first lets draw the lewis structure for CO₂
C is the central atom with O atom on either side of C
O - C - O
the number of valence electrons around each atom 
C- 4
O - 6
O - 6
total number of valence electrons - 16
number of electron pairs - 16/2 = 8
1 pair is shared between 1 O atom and C and another electron pair is shared between C and other O atom 
that leaves us with 8 -2 = 6 pairs 
add 3 pairs each for O atoms as lone pairs and octets for both O atoms are completed. But in C the octet is not complete yet. So we convert the 2 single bonds between C and O to 2 double bonds on either side. then octet of C is complete. number of lone pairs around O is reduced to 2 lone pairs.
the structure is as follows
  ..            . .
: O = C = O :
to determine the geometry lets use VSEPR
number of valence electrons around C - 4
number of bonds around C (2 O with 2 electrons contributed - 4
total number of electrons - 8
number of electron pairs - 4
VSEPR geometry for 4 pairs with no lone pairs is linear geometry

1. The lewis structure for CO₂ has a central carbon atom attached to oxygen atoms through two double bonds.

2. Carbon dioxide has a linear electron geometry

3. Carbon atom is sp hybridized.

4. Carbon dioxide has two C(p)-O(p) π bonds and two O(sp²)-C(sp) sigma bonds.
the geometry of CO₂ linear means its sp hybridised where each orbital has 50% s and 50% p character. One s orbital and one p orbital have mixed and form 2 sp orbitals. the remaining p orbitals take part in π bonds and sp orbitals take part in sigma bonding. So between C and O there's one sigma bond and one pi bond. Altogether 2 sigma bonds and 2 pi bonds.
O has 3 sp² orbitals with 2 of them being lone pair orbitals. One sp² orbital bonds with sp orbital of C forming a sigma bond. the other p orbital of O bonds with p orbital of C forming a pi bond.

Based on a kc value of 0.200 and the given data table, what are the equilibrium concentrations of xy, x, and y, respectively? express the molar concentrations numerically.

Answers

Without additional data from the data table regarding initial concentrations and change, we cannot calculate the equilibrium concentrations of XY, X, and Y based on the provided Kc value. An ICE table and the presumed small value of x in concentration changes are needed to employ the equilibrium constant effectively.

To calculate the equilibrium concentrations of XY, X, and Y based on the given Kc value of 0.200, we need additional data from the data table. The statement mentions XY, X and Y but only provides information about X2, Y2, and Ke. Assuming we are dealing with a chemical equilibrium that can be represented as:

X2 + Y2 → 2XY

A mathematical expression for the equilibrium constant Kc can be written as:

[tex]Kc = [XY]^2 / ([X2][Y2])[/tex]

Since an ICE table and initial concentrations are not provided in the question, we cannot calculate the equilibrium concentrations without that information. Additionally, Ke may refer to the equilibrium constant in terms of pressure (Kp), so it's unclear how to proceed without more context. The provided value of Ke or Kc needs to be used with the initial concentrations to determine equilibrium concentrations after setting up an ICE (Initial, Change, Equilibrium) table. Typically, to find x (the change in concentration), we assume x is small and can be ignored in the expressions (0.78 - x) and (0.21 - x) considering the very small Kc value, leading to a simplification in solving the equation for x, if applicable.

what is the sequence in which energy is converted to allow a gasoline-powered car to move.

Answers

The energy conversion or the energy transformation is the process of changing one form of energy to another , the energy produces certain changes within a system , Changes in the total energy of systems can only be accomplished by adding or removing the energy from them as the energy is a quantity which is conserved ( unchanging ) .

The internal combustion engine in the car converts the potential chemical energy in gasoline and oxygen into thermal energy which is transformed into the mechanical energy that accelerates the vehicle ( increasing its kinetic energy ) by causing the pressure and performing the work on the pistons .

Which renewable energy source depends on changing water levels?

Answers

water dams are a renewable energy source that depends on water levels.
the answer is hydroelectric power

Which of these practices does the most to keep wind and water from carrying away topsoil?

A. Crop rotation
B. Integrated pest management
C. Drip irrigation
D. Cover crops

Answers

i believe the answer is Cover crops. Cover crops are types of crops planted with a main purpose of managing soil erosion, soil fertility, soil quality, water weeds, pests, diseases, biodiversity and wildlife in an agriecosystem. Therefore, in this case the cover crops would prevent erosion by water and wind. By planting cover crops we help stabilize the soil and protect the top soil layer by not exposing it to erosion by water and wind.

Answer:

The correct answer is Cover Crops

What is the oxidation state of an individual nitrogen atom in nh4oh ? express the oxidation state numerically (e.g., +1)?

Answers

Final answer:

The oxidation state of an individual nitrogen atom in NH4OH is -3, determined by the rules for assigning oxidation states, where hydrogen is +1 and the ammonium ion has an overall charge of +1.

Explanation:

The oxidation state of an individual nitrogen atom in NH4OH can be calculated using the rules for assigning oxidation states. The compound NH4OH consists of the ammonium ion (NH4+) and the hydroxide ion (OH-). To find the oxidation state of nitrogen, we consider that hydrogen generally has an oxidation state of +1 when combined with nonmetals and oxygen has an oxidation state of -2. In NH4+, with four hydrogen atoms, each hydrogen atom contributes +1, for a total of +4. To balance this and give the overall charge of the ammonium ion (+1), the nitrogen must have an oxidation state of -3.

Furthermore, in OH-, the oxygen has an oxidation state of -2, and the single hydrogen has an oxidation state of +1. But since we are only interested in the nitrogen atom, we focus only on the NH4+ part of NH4OH. So, the oxidation state of an individual nitrogen atom in NH4OH is -3.

what would you notice about the dot diagram of an unstable element?

Answers

An unstable element would not have a full outer electron shell.

The dot diagram of an unstable element  has incompletely filled shell that is it will not have 8 dots which represent a stable octet.

What is an element?

It is defined as a substance which cannot be broken down further into any other substance. Each element is made up of its own type of atom. Due to this reason all elements are different from one another.

Elements can be classified as metals and non-metals. Metals are shiny and conduct electricity and are all solids at room temperature except mercury. Non-metals do not conduct electricity and are mostly gases at room temperature except carbon and sulfur.

The number of protons in the nucleus is the defining property of an element and is related to the atomic number.All atoms with same atomic number are atoms of same element.

Learn more about element,here:

https://brainly.com/question/14347616

#SPJ2

Which of these items best describes the arrangement of electrons in an atom of sulfur? A. Two electrons in its first energy level; eight electrons in its second energy level; six valence electrons in its outermost energy level B. Two electrons in its first energy level; two electrons in its second energy level; eight electrons in its third energy level; four valence electrons in its outermost energy level C. Two valence electrons in its first energy level; eight electrons in its second energy level; six electrons in its outermost energy level D. Eight electrons in its first energy level; eight valence electrons in its outermost shell

Answers

B is the answer to this question...

THE ANSWER TO THIS QUESTION IS B  IF YOU USING PF

A sample of neon occupies a volume of 375 ml at stp. What will be the volume of neon If the pressure is reduced to 90.0 KPA?

A. 422 ml
B. 422 L
C. 333 ml
D. 333 L

Answers

At STP conditions value of absolute pressure is 101.325 kPa.


From the given data we can determine the new volume of neon using following proportion:


V : V1 = p : p1 


375 : V1 = 101.325 : 90


101 * V1 = 90 * 375


V1 =33750/101 =333ml

Since neon is a noble gas we can easily assume its behaviour to be an ideal gas. In ideal gases pressure is said to be inversely proportional to volume,
at fixed temperature, this is Boyle's law.

Therefore we can use this law to state the following equation
P1V1/T1 = P2V2/T2
in this case temperature is fixed therefore it can be eliminated,
then,
P1V1 = P2V2
standard pressure (P1) is 101 325 Pa
V1 = 375 ml
P2 = 90 000 Pa
substituting these values,
101 325 Pa * 375 ml = 90 000 Pa * V2
                          V2 = 101 325 * 375 / 90 000
                               = 422.18 ml
       After rounding off the final answer is option A - 422 ml

Silver has a density of 10.5 g cm3 and gold has a density of 19.3 g/cm3. which would have the greater mass, 5cm^3 of silver or 5cm^3 of gold?

Answers

Some one who has an idea of variation would solve this without a problem...

Silver has density = 10.5g/cm³ and a volume of 5cm³

Gold has a density = 19.3g/cm³ and volume of 5cm³

If you observe the volumes are the same...

Density = mass/volume
Mass = density × volume

Since the volume is constant, the material with the greater density will have the greater mass and that's gold....

You might want to test

For gold mass = 19.3×5 = 96.5g
For silver mass = 10. 5 ×5 = 52.5g

96.5g>52.5g so gold has a higher mass....

Which of these agreements has goals of peace and shared scientific research?

A. Environmental Protection Treaty
B. Migratory Bird and Game Mammal Treaty
C. Antarctic Treaty System
D. Ramsar Convention

Answers

Option C, Antarctic Treaty System, is the right answer.

The Antarctic Treaty System, control global connections with regard to Antarctica; the only continent of the earth without the native population of human beings. In other words, the ATS is the entire system of adjustments developed for the intention of managing associations among states in the Antarctic. The main goal of the ATS is to guarantee "in the affair of all humankind that Antarctica shall proceed always to be practised completely for peaceful objectives and shall not become the view or gadget of universal disharmony.

Answer:

The correct answer is "Antarctic Treaty System"

Explanation:

The Antarctic treaty system signed the first arms control agreement. It bans any form of military agreement on the Antarctic, and promotes free scientific investigation. The treaty was signed by 12 countries during the era of the cold war. The only use of military is for peaceful purposes and scientific investigations. It promotes free exchange of scientific knowledge and personnel.

Other Questions
HELP!!! Write a paragraph detailing some tips that will improve your listening skills. Which type of imperial rule allowed western governments to run the colony themselves Use algebra tiles to model and solve x+5=3x-1 You have been appointed a health education team at your school Your job is to develop the criteria for the health informiation you will be sharing with students. Which term BEST represents your role According to "retributivists" why should people be punished? Describe the essential elements of forecasting the supply of and demand for human resources: Which inequality is equivalent to -6x 30?PLEASE ANSWER AS SOON AS POSSIBLE! THANK YOU. a: x 5b: x -5c: x 5d: x -5 How many kiloliters are 32,500 centiliters Why are people against saving the ozone layer? Anya runs a dog wash and spa service. She has to purchase basic, low-cost work supplies on a regular basis. She budgets a specific amount of money to buy these goods each month. Which type of credit would be most helpful and least risky for her? (5 points)Installment creditSecured credit cardService creditBank loan PLEASE HELP 15ptsIf f(4) = 7 and f'(4) = -2, f(3.97) = ? Which pathogen depends on living cells to reproduce What is the interquartile range of the data set? Enter the answer in the box. 20,25,30,30,31,40,41,49 In a detection experiment, randy says "yes" to 90% of the trials, and perry says "yes" to 70% of the trials. our best conclusion from this study is Jane had leukemia as a child and had to undergo numerous bouts of chemotherapy. she had associated the waiting room with nausea. now 35 years old, she had to take her mother to the same hospital for breast cancer treatment. she became nauseous while in the waiting room with her mother. her nausea best illustrates: complete the following math problem3+63= Which of these tax forms allows an employee to claim an exemption from federal income tax withholding? Why are you genetically distinct Can I please have help? A survey asked 10 boys and 10 girls how many hours they spent playing video games the previous week. The number of hours are given in the line plots.