Elton Mayo's Hawthorne studies concluded that human factors, including perceptions of attention and involvement in work decisions, have a significant impact on worker productivity. This observation phenomenon was termed the Hawthorne Effect. The studies highlighted the importance of psychological and social factors in workplaces over physical factors.
Explanation:Elton Mayo's famous experiment at the Hawthorne plant, part of the Western Electric Company, focused primarily on the study of interpersonal relations, motivation and organizational dynamics in the workplace, marking the origins of organizational psychology. The primary discovery was the Hawthorne Effect, which is the phenomenon where the performance of workers improved when they are aware they are being observed by researchers or supervisors. Mayo concluded that there is a human side to the work environment that plays a significant role in employee productivity.
One fundamental finding was that any change in the environmental variables, such as lighting levels, improved productivity, even if the change could be perceived as negative. This effect faded when the attention from researchers faded, indicating that attention, or the perception of importance, directly influences workers' output.
The Hawthorne studies also found that psychological and social factors in the factory were of more interest to the workers than the physical factors. When workers perceived that they could contribute to work decisions and felt they were an integral part of organizational processes, their satisfaction, and thus productivity, increased.
Learn more about Hawthorne Effect here:https://brainly.com/question/33823444
#SPJ6
Presto company purchased equipment and these costs were incurred: cash price $65,000 sales taxes 3,600 insurance during transit 640 installation and testing 860 total costs $70,100 presto will record the acquisition cost of the equipment as
For which type of company is additional growth likely to create more value: a high-roic company in a mature market or a low-roic company in a fast-growing market? give reasons for your answer
The percentage of imports to america by canada is approximately _______ percent.
For optimal conditioning, the minimum delay between the cs and us should be
There may be more than one critical path in a project network.
b. if one of the activities on the critical path is delayed, the entire project will be delayed.
c. the critical path is the sequence of activities between a project's start and finish that takes the shortest time to complete.
d. the activities along the critical path determine the completion time of the project.
Windsor co. incurs $1,050,000 of overhead costs each year in its three main departments, machining ($600,000), inspections ($300,000) and packing ($150,000). the machining department works 4,000 hours per year, there are 600 inspections per year, and the packing department packs 1,000 orders per year. information about windsor's two products is as follows: product x product y machining hours 1,000 3,000 inspections 100 500 orders packed 350 650 direct labor hours 1,700 1,800 if traditional costing based on direct labor hours is used, how much overhead is assigned to product x this year?
Final answer:
Using traditional costing, Windsor Co. would assign $510,000 in overhead costs to Product X, based on its direct labor hours.
Explanation:
The question asks how much overhead Windsor Co. assigns to Product X for the year using a traditional costing system that allocates overhead based on direct labor hours. To determine this, we must first calculate the overhead allocation rate by dividing the total overhead costs by the total direct labor hours. Then, we multiply the allocation rate by the direct labor hours for Product X.
Total overhead costs = $1,050,000
Total direct labor hours for both products = Product X (1,700 hours) + Product Y (1,800 hours) = 3,500 hours
Overhead allocation rate per direct labor hour = $1,050,000 / 3,500 hours = $300 per hour
Direct labor hours for Product X = 1,700 hours
Overhead assigned to Product X = 1,700 hours x $300/hour = $510,000
Which of the following is generally not part of overall risk management
A main reason careers in Information Technology are growing faster than average is
A) the government has provided funding to boost educational programs.
B) it has a large customer base of people, businesses, and organizations.
C) large corporations have turned to computers to handle their business.
D) the Internet has led to more people and businesses needing computer experts
Answer:
The correct answer is letter "D": the Internet has led to more people and businesses needing computer experts.
Explanation:
The massive spread of the use of the internet has changed the way businessmen make investments. It is not necessary to look for customers on the other side of the world anymore since they can reach you on a web page from the comfort of home. This had led to some companies in relying on a computer-based market. For that reason, those organizations require every day more computer specialists so they can take advantage of the network as much as possible.
Answer:
The Answer Is D.) the Internet has led to more people and businesses needing computer experts.
Explanation:
Right On Edge
Antonio is a 24-year-old professional tennis player. when he's not competing, he works as a coach at a local tennis club.
The type of engine that contains 2 camshafts mounted in its cylinder head is called a/an A. overhead valve engine. B. dual-overhead camshaft engine. C. overhead camshaft engine. D. push rod engine.
Answer:
Overhead Camshaft Engine
The type of engine with 2 camshafts mounted in the cylinder head is a dual-overhead camshaft engine, which allows for more precise valve timing and improved engine performance compared to overhead valve or push rod engines. The correct option is B.
The engine type that contains 2 camshafts mounted in its cylinder head is referred to as a dual-overhead camshaft engine. This design typically features one camshaft to operate the intake valves and another to operate the exhaust valves. This arrangement allows for more precise control over valve timing, which can lead to improvements in engine power and efficiency compared to single camshaft designs.
In contrast, an overhead valve engine generally has a single camshaft located in the engine block, with pushrods and rocker arms to operate valves located in the cylinder head. A push rod engine is another term for this kind of design. Lastly, an overhead camshaft engine might sometimes be confused with dual-overhead camshaft engines, but the former can refer to engines with either single or double camshafts.
"what do you think is more important for a good it professional: strong technical skills or strong people skills?"
AND is a boolean operator that refines an internet search to include all items in the search field
Answer:
The correct answer is: True.
Explanation:
Boolean operators are conjunctions such as and, or, not or and not that are used to include or exclude keywords in a web search in order to have more useful outcomes. This will only work if other words that may confuse the resulting search have been deleted.
A neighbor asks charles how the family is doing. there have been some family problems. charles takes offense, thinking that the neighbor is prying into personal business. charles is engaging in
The front office staff at marriott hotels has a preshift meeting at 7:00 am every morning. as general manager, you are expected to attend these meetings. the decision you make every day about what time you will arrive at work is a:
The correct answer is programmed decisions. This is defined as a decision in which is handled by rules or procedures of established business and the decision being made are likely for the purpose of a certain standard process in which are based on identifiable factors.
In what types of stores would you expect to find (a) convenience products, (b) shopping products, (c) specialty products, and (d) unsought products?
a) Convenience products are typically found in stores like convenience stores and supermarkets near the checkout area for impulse buys. b) Shopping products are available in department stores where customers can compare similar items. c) Specialty products are found in specialty stores or high-end department stores and feature unique characteristics or brand identification. d) Unsought products are sold through direct marketing or specialized stores.
Products in stores can generally be classified into four categories: convenience products, shopping products, specialty products, and unsought products. Each type of product is typically found in different locations within various retail environments due to their differing nature and consumer buying habits.
a) Convenience Products
Convenience products are those that are bought often, immediately, and with minimal comparison and buying effort. These items are usually found in convenience stores, supermarkets, drug stores, and gas stations. Examples include snacks, beverages, and toiletries. Because they are often impulse buys, they might be placed near the checkout area or in locations that are easily accessible and highly visible to the customers.
b) Shopping Products
Shopping products are less frequently purchased and customers often compare them on suitability, quality, price, and style. These items can be found in department stores, specialty chains, and electronics retailers. Stores may organize shopping products by category, such as apparel, electronics, or home furnishings, allowing customers to compare similar items.
c) Specialty Products
Specialty products are unique and consumers will make a special effort to search for and buy these products. These items typically have brand identification or unique features and are found in specialty stores or high-end department stores. The stores that carry specialty products might customize their inventories to match regional tastes or offer a broad range of products to cater to the specific desires of their customers.
d) Unsought Products
Unsought products are not well known to consumers or are products that consumers do not normally think of buying, such as life insurance or funeral services. These products can be sold through direct mail, sales visits, or specialty stores that focus on particular unsought products.
Which type of global marketing strategy works best when consumers share the same desires, needs, and uses for a product across countries and cultures? multiple choice product invention communication adaptation promotion adaptation product extension promotion customization?
John recently accepted a job in the marketing department with the burbank bagel boys. after just a few days on the job, john learned that the company has many layers of management, and seems to have a rule to cover almost every situation. these conditions suggest that burbank bagel boys is a(n):
Based on the scenario above, it suggest that the Burbank Bagel Boys is considered to be a bureaucratic organization of which it is defined as having many layers of management and as well as having extensive reliance in regards with rules and regulations.
Final answer:
Burbank Bagel Boys having many management layers and an abundance of rules suggests it is a bureaucratic organization, which is characterized by a strict hierarchy and numerous governing policies.
Explanation:
John recently learned that the Burbank Bagel Boys has many layers of management and numerous rules, suggesting that it is a bureaucratic organization.
A bureaucratic structure is characterized by a clear hierarchy, a well-defined division of labor, a set of policies and rules to govern operations, and procedures that employees must follow. This type of structure can often provide stability and predictability but might also result in a less flexible environment.
Which statement best describes an education at a vocational school?
The accounting break-even production quantity for a project is 5,850 units. the fixed costs are $27,400 and the contribution margin is $7. what is the projected depreciation expense? $0 $12,836 $12,914 $13,224 $13,550
Which of these human behaviors has the greatest potential to harm the environment? A. Use of technology to speed harvesting of resources B. Focus on steady harvesting of abundant resources C. Efforts to harvest easily replaced resources D. Use of technology to obtain difficult-to-harvest resources
Answer
A.Use of technology to speed harvesting of resources
Explanation
Technology has a huge effect such as the drastic climate changes around the world. For example, people nowadays travel more and unnecessary in some cases contributing to air pollution directly. Excess consumption of power has been facilitated by the use of technology in workplaces, homes, education centers and in remote places where electric gadgets are utilized. Technology has resulted to the generation of more wastes. Due to technological advances, excess deforestation has been experienced in the name of development.
Final answer:
The behavior with the greatest potential to harm the environment is the use of technology to obtain difficult-to-harvest resources, due to the invasive methods and significant ecological damage associated with these techniques.So,option D. Use of technology to obtain difficult-to-harvest resources is correct.
Explanation:
The question asks which human behavior has the greatest potential to harm the environment. Among the options provided, use of technology to speed harvesting of resources and use of technology to obtain difficult-to-harvest resources present significant concerns. Technologies that enhance the speed and efficiency of harvesting natural resources can lead to overharvesting, unsustainable resource use, and habitat destruction. These technologies have enabled humans to access and extract resources at rates that natural processes cannot replenish, leading to a decline in biodiversity and ecosystem health. Moreover, efforts to obtain resources that are difficult to harvest often involve invasive techniques that can severely disrupt ecosystems, such as deep-sea mining and drilling in sensitive habitats. Therefore, the behavior with the greatest potential to harm the environment involves the use of technology to obtain difficult-to-harvest resources, as it typically requires more invasive methods that can cause significant ecological damage.
When alcohol is taken in combination with antihistamines, benzodiazepines, antidepressants, or opioids, effects include __________. A. heightened drowsiness B. slowed breathing C. stomach bleeding
A. heightened drowsiness
just finished my test, hope this helps!
Which is not something found in a budget? A. the amount of money you saved last week B. the amount of money you earned babysitting. C. the amount of of money you spent on a gift D. the amount of money you spent on a new bat
A company purchased $3,400 worth of merchandise. transportation costs were an additional $300. the company returned $235 worth of merchandise and then paid the invoice within the 1% cash discount period. the total cost of this merchandise is:
[($3,400 - $235) x .99] + $300 = $4,000.50
= [3165 x 0.99] +$300
= 3133.35 + $300
= $3433.35
Final answer:
After adding transportation costs and subtracting returns from the purchase price, then applying a 1% cash discount, the total cost of the merchandise is $3,430.35.
Explanation:
The total cost of the merchandise purchased by the company can be calculated by following these steps:
Original cost of merchandise: $3,400Add additional transportation costs: $300Subtract the value of merchandise returned: -$235Subtract the 1% cash discount on the remaining amount (after returns).The final cost is found by calculating: ($3,400 + $300 - $235) × 99%.
First, we add the purchase cost and transportation costs, and then subtract the returns: $3,400 + $300 - $235 = $3,465.
Next, we calculate 1% of $3,465 which is $34.65. Then we subtract this discount from the total: $3,465 - $34.65 = $3,430.35.
Thus, the total cost of the merchandise after accounting for transportation, returns, and discount is $3,430.35.
A Cajun trinity, used in many Louisiana Creole and Cajun dishes such as gumbo, contains A. onion, celery, and parsnip. B. onion, celery, and bell pepper. C. onion, celery, and carrot. D. garlic, ginger, and green onion./// If you knoe the answer plz tell me
One year ago, the jenkins family fun center deposited $3,700 in an investment account for the purpose of buying new equipment four years from today. today, they are adding another $5,500 to this account. they plan on making a final deposit of $7,700 to the account next year. how much will be available when they are ready to buy the equipment, assuming they earn a 9 percent rate of return?
The Jenkins Family Fun Center will have the combined future values of three separate deposits earning a 9% annual rate of return when they are ready to buy new equipment. The amount for each deposit is calculated using the compound interest formula and summed for the total available funds.
The question asks how much money the Jenkins Family Fun Center will have available to buy equipment after making three separate deposits and earning a 9% annual rate of return. We calculate the future value of each deposit separately because they are made at different times and then sum them up for the total amount available.
The first deposit of $3,700 was made one year ago, so it compounds for 4 years. The second deposit is $5,500 today, which compounds for 3 years. Lastly, a deposit of $7,700 will be made next year, compounding for 2 years.
Using the formula for compound interest, we calculate:
FV = P(1 + r)^n
P is the principal amount (initial deposit), r is the annual interest rate (as a decimal), and n is the number of years the money is invested.
For the first deposit: FV = 3,700(1 + 0.09)^4
For the second deposit: FV = 5,500(1 + 0.09)^3
For the third deposit: FV = 7,700(1 + 0.09)^2
After solving each, we add all three amounts together to find the total money available to buy the equipment.
Giant robot magazine has embraced the use of __________ to reach its current and potential customers.
Giant robot magazine has embraced the use of social networking to reach its current and potential customers.
Further Explanation:
Current customer:
A current customer is a person who had made a purchase already. This customer already purchases the goods from the giant robot magazine. The company makes a strategy to maintain the existing customer.
Potential customer
A potential customer is a person who may purchase the goods from the company. The company tries strategies to attract the potential customer. If the number of customers is more, the sale of the company will increase.
Social networking:
Social networking is a type of marketing strategy which is used to attract the customer.
Following are the advantages of social networking:
It can reach to a large number of the customer at one time. It saves the cost of advertisement as the cost of social networking is less than direct marketing. It reduces the time to reach current and potential customers. In this lots of information provides in a short time to a large number of the customer. It reduces the price of the product as the cost od advertisement is less in this marketing strategy.Learn more:
1. Learn more about CRM system
https://brainly.com/question/6657146
2. Learn more about decision-making theory
https://brainly.com/question/6618895
3. Learn more about organizational structure
https://brainly.com/question/6256024
Answer details:
Grade: Middle School
Subject: Marketing
Chapter: Social networking
Keywords:
giant robot magazine, embraced, the use of, social networking, current customer, potential customer, purchase, cost of advertisement, lots of information, marketing strategy, attract, price of the product.
If a company picks an organizational architecture that is inappropriate for its marketplace, then:
what is 4 5/6 minus 5/6 minus 1 1/2 minus 2/3
The cash account of randell corp. reported a balance of
In spite of definite customer demand, new products often fail due to: