The distance from Earth to the Moon is approximately 384,000 kilometers, aligned with known values over the last few decades and confirmed through various calculation methods including signal transmission times and Kepler's Third Law.
Explanation:The distance from Earth to the Moon is approximately 384,000 kilometers (km). This can be inferred from the signal transmission duration of 1.28 seconds from Earth to an astronaut on the Moon, using the speed of electromagnetic radiation (which is the same as the speed of light). Considering that light travels at about 299,792 km/s, the distance is calculated as 1.28 s × 299,792 km/s = 383,654.56 km, which rounds up to approximately 384,000 km. This matches option b in the question and correlates with known values for the average distance of the Moon from Earth over the last 45 years. Furthermore, Kepler's Third Law and the month-long lunar orbit reiterate the same approximate distance.
A small 22 kilogram canoe is floating downriver at a speed of 2 m/s. What is the canoe's kinetic energy
if you wanted to slow evaporation from a pot of coffee which of the following achieve this goal
Covering the coffee pot, lowering temperature, minimising surface area, utilising a thermal coffee pot, humidity control and limiting exposure prevent coffee evaporation and maintain flavour and warmth.
There are numerous ways to reduce coffee evaporation:
Evaporation can be reduced by covering the coffee pot. Water vapour molecules cannot escape via the lid. This prolongs the coffee's flavour and heat.
Lowering Temperature: Evaporation rates rise with temperature. Reduce coffee temperature to slow evaporation. For instance, you can put the coffee in an insulated container or let it cool down before serving. Be careful not to let it cool too much, as it may impair the taste.
Reduce Surface Area: Move the coffee to a container with less air exposure if possible. For instance, switching coffee from a pot with a large aperture to a thermal coffee pot with a narrower neck will reduce evaporation.
Use a Thermal Carafe: Thermal carafes keep hot beverages warm without direct heat. Heat loss and evaporation are reduced by their insulation.
Humidity Control: Evaporation rates depend on humidity. Dry air evaporates faster. By slowing evaporation, a humidifier may adjust indoor humidity.
Limit Exposure: Keep the coffee pot out of the air as much as possible. Return the pot to its covered position after pouring only what you need into your cup.
These strategies can reduce evaporation from a pot of coffee, maintaining its flavour and warmth for a better drinking experience.
To know more about temperature
https://brainly.com/question/27944554
#SPJ2
How do electrons behave in a good insulator?
A rubber rod rubbed with fur acquires a charge of -4,8×10(-9)C. What is the charge on the fur? How much mass is transferred to rod?
What gas is the líquid water turning intro?
PLEASE HELP!!! FIRST IS BRAINLIEST!!!
The material or substance that a wave moves through is called a _____
. The medium affects the speed of the wave that passes through it. One factor that affects the speed of a wave is the ______
of medium. Some waves move faster in solids and some waves move faster in liquids and gases. Another factor that affects wave speed is the _______
of the medium.
The material or substance that a wave moves through is called a medium. The medium affects the speed of the wave that passes through it. One factor that affects the speed of a wave is the type of medium. Some waves move faster in solids and some waves move faster in liquids and gases. Another factor that affects wave speed is the temperature of the medium.
Assuming no air resistance, all projectiles have:
Explanation:
The motion of an object that move only under the action of gravity is called projectile motion.
All projectile have only acceleration due to gravity. In projectile motion, the horizontal movement of an object equals zero.
Equation of motion for a projectile are :
In horizontal motion,
Acceleration = [tex]a_x=0[/tex]
Velocity- time = [tex]v_x=v_{0x}[/tex]
Displacement - time, [tex]x=x_0+v_{0x}t[/tex]
In vertical motion,
Acceleration = [tex]a_y=-g[/tex]
Velocity- time = [tex]v_y=v_{0y}-gt[/tex]
Displacement - time, [tex]y=y_0+v_{0y}t-\dfrac{1}{2}gt^2[/tex]
Hence, this is the required solution.
When there is no air resistance, all projectiles accelerate in a vertical downward direction, which is equal to the acceleration due to gravity.
When an item is launched into the air, its motion is called a projectile motion when there is negligible air resistance and just gravity acting on it after the initial force that propels it into the air. A projectile is what it is, and its trajectory is what it took to get there.
The most important concept in projectile motion is that horizontal and vertical movements are independent of one another when air resistance is disregarded.
To learn more about projectile motion, click:
https://brainly.com/question/29761109
#SPJ6
when something is Plumb it is
The ash produced when solid waste is incinerated is ______ than the original waste.
A. Less toxic
B. More toxic
C.as toxic
D. More recyclable
Highly appreciate the help thanks.
what the maximum age human have?
depends how healthy u r, so if u r an average person with average health, then prob between the ages of 70 to 90
Which statements accurately describe the waste generated by nuclear reactions? Check all that apply. It is hazardous for hundreds to thousands of years. Some waste can be recycled and used again. It is hazardous to living organisms forever. Some waste can be completely transformed into energy. It is not hazardous after a couple of years.
The relative density of oak wood is 0.64 .find the density in the cgs system
which would ultimately cause the armature in an electric motor to spin?
In an electric motor, the armature spins due to the interaction between the magnetic field produced by the stator (the stationary part of the motor) and the magnetic field produced by the armature itself.
Here's a simplified explanation of the process:
Supplying Power: When electric current flows through the motor's coils (which are part of the armature), it creates a magnetic field around the coils. This process usually involves a commutator and brushes to direct the current flow in the coils effectively.
Magnetic Fields: The stator also has its own set of coils that are arranged in such a way that when current passes through them, they create a magnetic field. This magnetic field interacts with the magnetic field produced by the armature.
Electromagnetic Force: Due to the interaction of these magnetic fields, an electromagnetic force is generated. This force causes the armature (which contains the coils) to rotate. The direction of rotation depends on the direction of the current and the orientation of the magnetic fields.
Continuous Rotation: As long as the electric current is supplied to the motor, this process continues, resulting in continuous rotation of the armature.
In summary, it's the interaction of magnetic fields generated by the armature and the stator, along with the flow of electric current, that causes the armature to spin in an electric motor.
Visible light is a range of _____ energy EM waves in the electromagnetic spectrum that the human eye can see. A. zero B. high C. low D. medium
The visible light falls into the measure of low energy range in the electromagnetic spectrum.
Answer: Option C
Explanation:
The visible light is one of the 7 kind of electromagnetic spectrum that we know. Of those 7 kind, the visible light falls in between of the electromagnetic spectrum according to the wavelength of the light.
The visible light consists of VIBGYOR where the red has the 1.8 eV of the energy with violet to have around 3.4 eV. Therefore the correct answer is low.
Permafrost thaws only briefly in the summer. t o f brainliest
False... (Perma = Permanent = never thaws)
Compared to oceanic crust , continental crust is generally
Continental crust is typically thicker, more complex in its composition and predominantly made of granite compared to oceanic crust which is thinner, simpler and mainly composed of basalt. The continental crust covers 45% of earth's surface, whereas oceanic crust covers 55%. The continental crust, being thicker and more buoyant, is generally not subducted in plate tectonics unlike the oceanic crust.
Explanation:Compared to the oceanic crust, the continental crust is typically thicker and composed predominantly of different types of rocks. While oceanic crust is about 6 kilometers thick and made primarily of basalt, continental crust varies between 20 to 70 kilometers in thickness and is primarily composed of a volcanic class of silicates called granite.
Notably, the crust is the easiest layer for geologists to study and makes up only about 0.3% of the total mass of Earth. The continental crust covers about 45% of the surface, some of which lies beneath the oceans. The typical density of the crust, both oceanic and continental, is around 3 g/cm³.
The continental crust tends to be older and more complex than the oceanic crust. It consists of many different types of rocks formed over billions of years from many different types of processes. Due to the increased thickness and complexity of its composition, the continental crust is more buoyant than the oceanic crust and hence is not subducted during the process of plate tectonics. Oceanic crust, being thinner and denser often gets subducted beneath the continental crust at convergent boundaries.
Learn more about Continental Crust here:https://brainly.com/question/37575991
#SPJ5
Explain the connections between reactants, products, and limiting reactant.
For spherical mirrors, how many reference rays are used to find the image point? A two B three C four D six
Which statement about energy generated from wind is true?
A. Wind is free "fuel," and government taxes on its use are lower than those on fossil fuel are
B. Wind power is abundant everywhere, and battery storage of excess power is inexpensive.
C. Wind power uses more water than coal power plants, but it is a far safer power source for wildlife.
D. Wind power gives off no greenhouse gases, but some people feel it spoils the view of the landscape.
The true statement about wind energy is "wind power gives off no greenhouse gases, but some people feel it spoils the view of the landscape".
Renewable energiesRenewable energies are energy sources that do not emit carbon dioxide or other greenhouse gases. They help in lowering carbon foot-print, since they do not emit carbon dioxide gases.
Examples of renewable energiesWind energySolar energyHydro-electric energy, etcThus, the true statement about wind energy is "wind power gives off no greenhouse gases, but some people feel it spoils the view of the landscape".
Learn more about wind energy here: https://brainly.com/question/1152908
Which does not describe a physical change happening to water?
A physical change in water does not include breaking chemical bonds to form new substances. Therefore, the correct answer is the option that describes a chemical change, such as water reacting with another substance to form a different compound. For instance, water does not undergo a physical change when it reacts with sulfur dioxide to form sulfuric acid; this is a chemical change.
Physical changes are changes in the state or phase of a substance that do not involve altering the chemical composition. Examples of physical changes in water include melting (solid to liquid), freezing (liquid to solid), evaporation (liquid to gas), condensation (change from gas to liquid), and sublimation (solid to gas without becoming liquid). A charged atom is known as an ion. The term used to describe the mineral content of water is hardness. The gas that forms sulfuric acid when it reacts with water is sulfur dioxide. These concepts are fundamental in understanding the physical and chemical properties of substances, especially water, which is vital in chemistry and environmental science.
This law states that oppositely charged objects will exert an attractive force on each other while two objects that have like charges will repel each other. The attractive force varies with the size of the charges as well as the distance between them.
Answer:
Its Law of attraction
Explanation:
A piano tuner strikes a tuning fork at the same time he strikes a piano key with a note of a similar pitch. If he hears 3 beats per second, and the tuning fork produces a standard 440 Hz tone. Then what was the frequency produced by the struck piano string? a 434Hz or 446Hz b 437 Hz c 437Hz or 443 Hz d 443 Hz
What is the total amount of energy required to melt 100 grams of ice at 0DC to liquid water at 0DC?
Answer: 301 kJ of energy
Explanation:
There is a close relationship between magnetic forces and the generation of electric current. Explain how magnets can be used to generate electric current and how electric current can be used to create electromagnets. For each, give an example of a device you would find around the home.
Answer:
If a magnet is continuously moved to and fro in a coil or vise versa , due to change in magnetic field passes through a coil , electric current can be produced, it called electromagnetic induction.
And if current flows in a coil , it will behave like a magnet , that is called Electromagnetism.
Explanation:
What is electromagnetic induction and Electromagnetism ?According to the Faraday's law , when magnetic field passing through a coil is changed , an electric potential is developed , that causes current , the phenomenon is called Electromagnetic induction.In it ,the induced emf (potential)is directly proportional to the rate of change of magnetic flux,[tex]e = N. \frac{(B.A)}{dt}[/tex] Example- Generator.According to the Clock wise rule , when current flows in a coil , according to the direction of current , its one face become N pole and S pole, thus it becomes a magnet or tiny magnet .Example- Solenoid.Hence Electromagnetic induction and electromagnetism can be defined.
For more detail ,do read it-
https://brainly.com/question/13369951
#SPJ2
Energy that does not involve the large-scale motion or position of objects in a system is called:
A- Kinetic Energy
B- Potential Energy
C- Nonmechanical Energy
D- Conserved Energy
in which layer of the atmosphere do communication satellites orbit Earth?
Answer:
In the exosphere
Explanation:
According to the "Future Potential Source #2: Wind" article, what natural resource does wind power free up
If light intensity obeyed an inverse square law you would expect to find the intensity of light to decrease as the square of the distance increases
A) true
B) false
what is transferred by a radio wave
A radio wave transfers energy and information through space via oscillating electric and magnetic fields.
A radio wave is a type of electromagnetic radiation that transfers energy through space. When a radio transmitter generates a signal, it creates a rapidly oscillating electric field, which in turn creates a magnetic field that propagates through the surrounding space at the speed of light.
This changing magnetic field induces a corresponding electric field in any conductive material (such as an antenna) that intercepts the wave. The electrical energy carried by the radio wave is then transformed into an electrical current that can be amplified and processed by electronic circuits.
In practical terms, radio waves are used to transmit various types of information, including voice and music for broadcasting, data for wireless communication, and navigation signals for GPS. The specific type of information transmitted by a radio wave is encoded in its frequency, amplitude, and modulation, which determine the characteristics of the wave and allow it to be decoded by the receiver.
Therefore, Through the use of oscillating electric and magnetic forces, radio waves transmit information and energy through space.
To learn more about magnetic fields click:
brainly.com/question/23096032
#SPJ2
why is data organization important
Answer:
cuz it is important
Explanation: