Answer:8.59L
Explanation:
The other answer has all the right steps but the atomic mass of potassium is actually 39.098 not 19.
Final answer:
Approximately 8.58 liters of nitrogen gas are needed to react with 90.0 g of potassium to produce potassium nitride at STP, after calculating moles of potassium and its stoichiometric conversion to moles and then volume of nitrogen gas.
Explanation:
To determine how many liters of nitrogen gas are needed to react with 90.0 g of potassium to produce potassium nitride, we first need to understand the correct chemical reaction for forming potassium nitride from potassium and nitrogen gas. The reaction is as follows:
6 K(s) + N₂(g) → 2 K₃N(s)
Firstly, calculate the moles of potassium. The molar mass of potassium (K) is approximately 39.10 g/mol. Therefore, the moles of potassium in 90.0 g are calculated as:
90.0 g K × (1 mol K / 39.10 g K) = 2.30 mol K
From the balanced equation, it is clear that 6 moles of potassium react with 1 mole of nitrogen gas. Hence, the moles of nitrogen gas needed can be calculated as:
2.30 mol K × (1 mol N₂ / 6 mol K) = 0.383 mol N₂
At Standard Temperature and Pressure (STP), 1 mole of any gas occupies 22.4 liters. Therefore, the volume of nitrogen gas required at STP can be found as:
0.383 mol N₂ × 22.4 L/mol = 8.58 L N₂
Therefore, approximately 8.58 liters of nitrogen gas are needed to react with 90.0 g of potassium to produce potassium nitride at STP.
A student made this model of a carbon dioxide molecule. its has one carbon atom and two oxygen atoms what is the correct way to write the chemical name of carbon dioxide
Answer:
The chemical name of carbon dioxide is [tex]CO_2[/tex].
Explanation:
[tex]C+2O\rightarrow CO_2[/tex]
In a model of carbon dioxide made by the student there are one carbon atom and two oxygen atoms which means that total atoms in the molecule of carbon-dioxide is three.
While writing the chemical name of the carbon dioxide we will first write the symbol of the electropositive atom and then electronegative atom:[tex]CO_2[/tex]
What are five characteristics of a group on the periodic table?
Calculate the number of joules released when 72.5 grams of water at 95.0 degrees Celsius cools to a final temperature of 28.0 degrees Celsius.
a mixture of 10.0 g of Ne and 10.0 g AR have a total pressure of 1.6 atm. what is the partial pressure of Ne?
Actually I know the answer but I didn't know how they get 2/3
The partial pressure of Ne is [tex]\boxed{1.063{\text{ atm}}}[/tex].
Further Explanation:
Dalton’s law:
This law states that partial pressure of any gas is calculated by the multiplication of mole fraction and the total pressure of gas mixture.
The expression for partial pressure of a particular gas is,
[tex]{P_{{\text{gas}}}} = {X_{{\text{gas}}}} \cdot {P_{{\text{total}}}}[/tex] …… (1)
Where,
[tex]{P_{\text{gas}[/tex] is the partial pressure of the gas.
[tex]{P_{{\text{total}}[/tex] is the total pressure of the mixture.
[tex]{X_{{\text{gas}}}[/tex] is the mole fraction of gas.
The formula to calculate moles of component is as follows:
[tex]{\text{Moles of component}} = \dfrac{{{\text{Mass of component}}}}{{{\text{Molar mass of component}}}}[/tex] …… (2)
Substitute 10.0 g for mass of component and 20.179 g/mol for molar mass of component in equation (2) to calculate moles of Ne.
[tex]\begin{aligned}{\text{Moles of Ne}} &= \frac{{{\text{10}}{\text{.0 g}}}}{{{\text{20}}{\text{.179 g/mol}}}} \\ &= 0.4956{\text{ mol}} \\\end{aligned}[/tex]
Substitute 10.0 g for mass of component and 39.948 g/mol for molar mass of component in equation (2) to calculate moles of Ar.
[tex]\begin{aligned}{\text{Moles of Ar}} &= \frac{{{\text{10}}{\text{.0 g}}}}{{{\text{39}}{\text{.948 g/mol}}}} \\&= 0.2503{\text{ mol}} \\ \end{aligned}[/tex]
Total number of moles can be calculated as follows:
[tex]\begin{aligned}{\text{Total number of moles}} &= \left( {0.4956 + 0.2503} \right){\text{ mol}} \\ &= 0.7459{\text{ mol}} \\\end{aligned}[/tex]
The formula to calculate mole fraction of Ne is as follows:
[tex]{\text{Mole fraction of Ne}} = \dfrac{{{\text{Moles of Ne}}}}{{{\text{Total number of moles}}}}[/tex] …… (3)
Substitute 0.4956 mol for moles of Ne and 0.7459 mol for total number of moles in equation (3).
[tex]\begin{aligned}{\text{Mole fraction of Ne}} &= \frac{{{\text{0}}{\text{.4956 mol}}}}{{{\text{0}}{\text{.7459 mol}}}} \\&= 0.6644 \\\end{aligned}[/tex]
Substitute 0.6644 for [tex]{X_{{\text{gas}}}}[/tex] and 1.6 atm for [tex]{P_{{\text{total}}}}[/tex] in equation (1) to calculate partial pressure of Ne.
[tex]\begin{aligned}{P_{{\text{Ne}}}} &= \left( {0.6644} \right)\left( {1.6{\text{ atm}}} \right) \\&= 1.063{\text{ atm}} \\\end{aligned}[/tex]
Learn more:
Calculate the moles of chlorine in 8 moles of carbon tetrachloride: https://brainly.com/question/3064603 ]Which law states the direct relationship between volume and absolute temperature at constant pressure? https://brainly.com/question/1403211
Answer details:
Grade: Middle School
Subject: Chemistry
Chapter: Gases and the kinetic-molecular theory
Keywords: partial pressure, mole fraction, Ne, Ar, moles, molar mass, mass, 1.063 atm, 1.6 atm, 0.6644, mole fraction of Ne.
Temperature at which a substance goes from a solid to liquid
Which is not a characteristic of chemical equilibrium?
The reactions go to completion.
The reactions are reversible.
The reaction occurs in a closed container.
The forward and reverse processes occur at the same rate.
C. The reactions go to completion
Please help ill medal and fan!
After 15 minutes, 30 g of a sample of polonium-218 remain uncharged. If the original sample had a mass of 960 g, what is the half-life of polonium-218?
And
Suppose you want to separate the leaves, acorns, and twigs from a pile of soil. Filtration and distillation are two processes of separating mixtures. Explain which process you would use and why.
i only have 3 questions left for this, please help!!!!
QUESTION 3
Daughter atoms X and Y are formed from the fission of atom Z. Which of the following statements is true about X and Y?
The combined atomic mass of X and Y will be greater than the mass of atom Z.
The mass of element X will always equal the exact atomic mass of Z.
High temperatures are required to make atoms X and Y.
Atoms X and Y will have a smaller atomic mass than atom Z.
QUESTION 7
What is the type of material needed in nuclear power plants?
combustible
stable
fissile
low mass
3 points
QUESTION 8
Which of the following are properties of nuclear fission?
The energy produced is controllable.
It is the source of the sun’s energy.
The reaction requires high temperature conditions.
It is used in nuclear power plants.It is used in nuclear power plants.
Answer:
3: Atoms X and Y will have a smaller atomic mass than atom Z
7: Fissile
8: It is used in nuclear power plants
Explanation:
3
The process of nuclear fission is where one unstable atom (in this case atom Z) splits into two smaller atoms (atoms X and Y) and releases energy in the form of radiation.
Hence, the combined atomic mass of X and Y cannot be grater than the mass of atom Z, fission does not need to be at high temperatures to take place, and the mass of element X will never equal the mass of element Z.
7
In nuclear fission, the energy is produced by the decay of radioactive elements, and that energy can not be obtained by combustion. Stable elements will not undergo fission, and low mass elements tend to be very stable too.
8
The energy produced from nuclear fission is not always controllable, that is why disasters such as nuclear meltdowns happen, because the energy output cannot be controlled. The atoms in the sun undergo fusion, and not fission. Once again, nuclear fission does not require high temperatures (nuclear fusion does, hence why the sun has such a high temperature).
Calculate the percent ionization of 0.0075 m butanoic acid (ka = 1.5 x 10-5) in a solution containing 0.085 m sodium butanoate.
The percent ionization of the solution is 0.017%.
The steps involved are;
Write the reaction equationSetup the ICE tablemake the necessary calculationThe equation of the reaction is;
CH3CH2CH2COOH(aq) ⇄ H^+(aq) + CH3CH2CH2COO^-(aq)
I 0.0075 0 0.085
C -x +x + x
E 0.0075 - x x 0.085 + x
The Ka of the acid = 1.5 x 10^-5
Hence;
1.5 x 10^-5 = x(0.085 + x)/0.0075 - x
1.5 x 10^-5 (0.0075 - x ) = x(0.085 + x)
1.1 x 10^-7 - 1.5 x 10^-5x = 0.085x + x^2
x^2 + 0.085x - 1.1 x 10^-7 = 0
x = 0.0000013 M
Percent ionization= 0.0000013 M/0.0075 × 100/1
= 0.017%
Learn more about percent ionization: https://brainly.com/question/9173942
The loss of static energy electric charges move off an object is called
The loss of static energy as electric charges move off an object is called electric discharge.
Electric discharge can be defined as release and transmission of electricity through a medium in an applied electric field.
It results from the conducting path between two points of different electrical potential in the medium where the points are immersed.
How can you raise the average kinetic energy of the water molecules in a glass of water?
Final answer:
To rise the average kinetic energy of water molecules in a glass, you need to increase the water's temperature, which can be done by heating the water or increasing the room temperature. This is based on the principle that temperature is proportional to the average kinetic energy of the particles in a substance.
Explanation:
The average kinetic energy of water molecules in a glass can be raised by increasing the temperature of the water. This increase in temperature can be achieved in several ways, one of which is by increasing the temperature of the room, allowing heat energy to transfer from the environment to the water. It's important to note that replacing the water with a more dense fluid or adding more water will not increase the kinetic energy of the existing water molecules.
As detailed in the kinetic-molecular theory, temperature is directly proportional to the average kinetic energy of the particles in a substance. Thus, when water is heated, the molecules begin to move more rapidly, with more extensive vibrations and translations. This results in increased collisions between molecules and a higher average velocity and kinetic energy of the particles.
It's worth clarifying that kinetic energy is transferred from hot water molecules to colder substances like ice, but what we want in this scenario is to increase the kinetic energy of the water molecules themselves, which is done by applying heat to the water.
When the ancient Greeks looked at the night sky they noticed that some points of light seem to "wander" in the sky. Which term do we use for these wanderers today? A. stars B. nebulae C. planets D. moons
Answer:
I think planets....?
Explanation:
I'm not actually sure but my brother told me it's nebulae and I think he's lying... stars don't move and the moon wouldn't actually be a "point" even if it was it wouldn't be plural....
Sodium ions are used by your body every time you move a muscle. The difference between the Na+ ions and atomic Na is that A) ionic sodium has one more electron. B) atomic sodium has one more electron. C) atomic sodium has one fewer electron. D) ionic sodium is only found in the body.
B) atomic sodium has one more electron.
This can be easily seen if you compare the charges - ionic sodium carries one more positive charge than atomic sodium, so ionic sodium must have one fewer electron.
How is the strength of a weak acid related to the strength of its conjugate base?
Final answer:
The strength of a weak acid is related to the strength of its conjugate base through an inverse relationship.
Explanation:
The strength of a weak acid is related to the strength of its conjugate base through an inverse relationship. According to the general rule, the stronger the acid, the weaker the conjugate base, and vice versa. This can be understood by considering the concept of acid-base equilibrium.
For example, if we have a strong acid and a weak base, the acid-base equilibrium will favor the side with the weaker acid and base. Conversely, if we have a weak acid and a strong base, the equilibrium will favor the side with the weaker acid and base.
Therefore, the strength of a weak acid and its conjugate base are inversely related, with the weaker acid having a stronger conjugate base.
This reaction was monitored as a function of time:
AB --> A + B
A plot of 1/[AB] versus time yields a straight line with slope of -0.055/M*s.
a) What is the value of the rate constant (k) for this reaction t this temperature?
b) Write the rate law for the reaction.
c) What is the half-life when the initial concentration is 0.55M?
d) If the initial concentration of AB is 0.250M, and the reaction mixture initially contains no products, what are the concentrations of A and B after 75s?
a. The value of the rate constant (k) for this reaction at this temperature is 18.18 [tex]M^-1*s^-1.[/tex]
b. The rate law can be written as: ate = k[AB]
c. The half-life of the reaction when the initial concentration is 0.55 M is 0.038 seconds.
d. The concentrations of A and B after 75 seconds would be approximately 0.004 M each.
How to Write the rate law for the reaction.To answer the given questions, analyze the reaction kinetics based on the provided information:
a) The rate constant (k) can be determined from the slope of the plot 1/[AB] versus time. The slope is given as -0.055/M*s. The rate constant (k) can be calculated by taking the reciprocal of the slope:
k = -1/slope
k = -1/(-0.055/Ms)
k = 18.18 [tex]M^-1s^-1[/tex]
Therefore, the value of the rate constant (k) for this reaction at this temperature is 18.18 [tex]M^-1*s^-1[/tex].
b) The rate law can be determined using the given reaction:
AB --> A + B
Since the reaction is a first-order reaction, the rate law can be written as:
Rate = k[AB]
c) The half-life (t₁/₂) can be calculated using the first-order integrated rate law:
t₁/₂ = (0.693) / k
Given the initial concentration ([AB]₀) as 0.55 M and the rate constant (k) as 18.18 [tex]M^-1*s^-1[/tex], calculate the half-life:
t₁/₂ = (0.693) / (18.18 [tex]M^-1*s^-1[/tex])
t₁/₂ ≈ 0.038 s
Therefore, the half-life of the reaction when the initial concentration is 0.55 M is approximately 0.038 seconds.
d) To determine the concentrations of A and B after 75 seconds, use the first-order integrated rate law:
[AB] = [AB]₀ * exp(-kt)
Given:
[AB]₀ = 0.250 M (initial concentration of AB)
t = 75 s (time)
Using the rate constant (k) calculated earlier (18.18 [tex]M^-1*s^-1[/tex]), calculate the concentrations of A and B:
[AB] = 0.250 * exp(-18.18 [tex]M^-1*s^-1[/tex] * 75 s)
[AB] ≈ 0.004 M
Since the reaction is stoichiometrically 1:1, the concentrations of A and B after 75 seconds would be:
[A] ≈ 0.004 M
[B] ≈ 0.004 M
Therefore, the concentrations of A and B after 75 seconds would be approximately 0.004 M each.
Read on Reaction on https://brainly.com/question/11231920
#SPJ1
The rate constant is 0.055/M*s. The rate law is rate = k[AB]. The half-life is 10.5 seconds and the concentrations of A and B after 75 seconds can be calculated using the integrated rate equation.
Explanation:a) The slope of the line in the plot represents the rate constant (k) for this reaction. In this case, the slope is -0.055/M*s. So, the value of the rate constant is 0.055/M*s.
b) The rate law for the reaction can be determined by examining the stoichiometry of the reaction. The reaction is AB → A + B. Since the rate is expressed as 1/[AB], the rate law is rate = k[AB].
c) To find the half-life, we need to use the integrated rate equation ln([AB]₀/[AB]) = kt. Substituting the given values, we get ln(0.55/0.25) = (0.055/M*s)t. Solving for t, we find t = 10.5 seconds.
d) To find the concentrations of A and B after 75 seconds, we can use the integrated rate equation again. [A] = [AB]₀ - [AB]₀e^{-kt}. Plugging in the values, we get [A] = 0.250M - 0.250Me^{(-0.055/M*s)(75s)}. Similarly, we can find [B] = 0.250M - [A].
Learn more about Reaction kinetics here:https://brainly.com/question/31643864
#SPJ1
The solubility of a salt in a given volume of water depends primarily on the
If horizontal layers of sedimentary rock have a vertical fault running through them, how might a geologist use relative dating to determine when the fault occurred ? Could scientists use absolute dating as well ? Why or why not ?
Answer:
Scientists will be able to use relative dating and absolute dating to determine when the failure occurred.
Explanation:
Scientists will be able to use relative dating, because it is the method capable of determining an order of events that occurred in the past by relating the rock with that failure to a rock without failure or with different failures, without the need to determine an absolute age of when the failure happened, however revealing a relative, approximate date.
It will also be possible to use absolute dating, which will give a more precise age on the fault present in the rock, using a chronological age that will be determined by observing the physical and chemical properties of the rock. This technique shows the age of the event in numbers, as opposed to relative dating.
Calculate the number of moles in 3.025 X 10^28 atoms of NaCl.
1.0 mol NaCl
5.02 X 10^4 mol NaCl
5.02 X 10^50 mol NaCl
1.78 X 10^39 mol NaCl
Pls hurry!!
If the percent (mass/mass) for a solute is 4% and the mass of the solution is 200 g, what is the mass of solute in solution?
8.0 g
50 g
80 g
800 g
Answer : The correct option is, (a) 8.0 g
Solution : Given,
Percent of solute = 4 %
Mass of solution = 200 g
Mass by mass percent (m/m)% : It is defined as the mass of solute present in the mass of solution.
Formula used :
[tex](m/m)\%=\frac{\text{Mass of solute}}{\text{Mass of solution}}\times 100[/tex]
Now put all the given values in this formula, we get the mass of solute.
[tex]4\%=\frac{\text{Mass of solute}}{200g}\times 100[/tex]
[tex]\text{Mass of solute}=8.0g[/tex]
Therefore, the mass of solute in solution is, 8.0 g
Under standard condition and 298 K, the free energy difference, ∆Gº between the two chair conformations of a substituted cyclohexane molecule is 5.95 kJ/mol. What percent of the sample at equilibrium represents the most stable conformer?
Using the given free energy difference at 298 K and the equation ∆Gº = -RTlnK, we calculate the equilibrium constant (K) and determine that the most stable conformer of a substituted cyclohexane molecule comprises approximately 91.7% of the sample at equilibrium.
To determine what percent of the sample at equilibrium represents the most stable conformer of a substituted cyclohexane molecule, we use the free energy difference (
∆Gº) between the two chair conformations. Given that
∆Gº is 5.95 kJ/mol at 298 K, we first calculate the equilibrium constant (K) using the equation ∆Gº = -RTlnK, where R is the universal gas constant (8.314 J/mol•K) and T is the temperature in Kelvin. Substituting the known values, we have:
5.95 kJ/mol = - (8.314 J/mol•K)(298 K)lnK
Converting 5.95 kJ/mol to J/mol, we get 5950 J/mol. We then solve for K:
5950 J/mol = - (8.314 J/mol•K)(298 K)lnK
lnK = -5950 J/mol / (- (8.314 J/mol•K)(298 K))
lnK = 2.397
K = e^(2.397)
K ≈ 11.0
The ratio of the amounts of each conformer at equilibrium can be expressed as K = [Most Stable]/[Least Stable]. Hence, if the least stable conformer is taken as 1 part, the most stable will be 11 parts out of a total of 12 parts. The percent representation of the most stable conformer at equilibrium is then (11/12) * 100%, which approximates to 91.7%.
Therefore, the most stable conformer comprises approximately 91.7% of the sample at equilibrium.
Which diagram(s) represents the bonding pattern of metals?
A and B
C and D
A
C
The answer is the third option which is A.
Please vote Brainliest if I am right. (:
Answer is: A.
1. Metallic bond is a type of chemical bond.
2. Metallic bond is formed between electrons and positively charged metal ions.
3. Metallic radius is defined as one-half of the distance between the two adjacent metal ions.
4. Metallic bond increace electrical and thermal conductivity.
5. Metals conduct heat, because when free moving electrons gain energy (heat) they vibrate more quickly and can move around.
The smallest particle from among the following is
A. Li+
B. F
C. F-
D. Li
The equilibrium constant is given for one of the reactions below. Determine the value of the missing equilibrium constant.
N2O4(g) ⇌ 2 NO2(g) Kc = 1.46
5 N2O4(g) ⇌ 10 NO2(g) Kc = ?
A) 1.46
B) 0.292
C) 6.63
D) 1.08
E) 7.30
Answer: C,
Answer:
The answer is C) 6.63
Explanation:
When the coefficients in a balanced equation are multiplied by a factor, the resulting equilibrium constant is raised to this factor.
In this case, you have the following equilibrium:
N₂O₄(g) ⇌ 2 NO₂(g) Kc = 1.46
In which the coefficients are 1 (for N₂O₄) and 2 (for NO₂)
In the second equation, notice that you have the coefficients of the first equation multiplied by 5 (1 x 5= 5 for N₂O₄; 2 x 5= 10 for NO₂) :
5 N₂O₄(g) ⇌ 10 NO₂(g)
Thus, to obtain the equilibrium constant of the second equation (Kc'), you have to raise the first equilibrium constant (Kc) to 5:
K'c= (Kc)⁵= (1.46)⁵= 6.63
What effect would poor circulation of the melting point bath liquid have on the observed melting point?
If an atom loses a neutron, what happens? (4.10)
Answer:
Its mass is lowered, but it is still the same element.
Explanation:
It right
what do we need to survive and how long for
Radio stations identify themselves by their position on the radio dial such as 90.1 and 93.3. This number is based on the number of waves or cycles that pass a fixed point in a specific unit of time. To which property of a wave does this identification number refer? A. frequency B. wavelength C. loudness D. amplitude
The property of a wave is given as frequency
What is the frequency?Generally, Frequency is simply defined as the number of waves that pass through a fixed point in a given amount of time
In conclusion, for a number based on the number of waves or cycles that pass a fixed point in a specific unit of time, we refer to it as frequency
Read more about frequency
https://brainly.com/question/24623209
Look back at your data and your regression equation. (Sample data is shown to the right, with X= pressure and Y=volume.) click all statements that are true.
Answered.
Answer:
ALL are true
Explanation:
How many electrons are needed in the outer energy levels of most atoms to be chemically stable?
The volume of a gas is 4.00 liters at 293 k and constant pressure. for the volume of the gas to become 3.00 liters, the kelvin temperature must be equal to