Answer:
0.071 mole
Explanation:
As discovered from Avogadro's hypothesis, 1 mole of any substance contains 6.02x10^23 molecules.
This simply means that 1 mole of H3PO4 also contains 6.02x10^23 molecules.
If 1 mole H3PO4 contains 6.02x10^23 molecules,
Then, xmol of H3PO4 will contain 4.3x10^22 molecules i.e
Xmol of H3PO4 = 4.3x10^22/6.02x10^23 = 0.071 mole
From the calculations made above, 4.3x10^22 molecules of H3PO4 have 0.071 mole of H3PO4
Using Avogadro's number, you can find there are approximately 0.71 moles in 4.3 x [tex]10^{22}[/tex] molecules of H3PO4.
Explanation:To find out how many moles are in 4.3 x [tex]10^{22}[/tex] molecules of H 3 PO 4, you want to use Avogadro's number, which is 6.022 x [tex]10^{23}[/tex] molecules per mole. To find the number of moles:
Number of moles = (Number of molecules) / (Avogadro's constant)
4.3 x [tex]10^{22}[/tex] molecules H3PO4 / (6.022 x [tex]10^{23}[/tex] molecules/mole) = 0.71 moles H3PO4.
So, there are approximately 0.071 moles in 4.3 x[tex]10^{22}[/tex] molecules of H3PO4.
Learn more about Chemistry here:
https://brainly.com/question/36629312
#SPJ3
What are the reactants and products of esters????:/
Reactants: Carboxylic Acid + Alcohol
Products: Ester + Water
Esters are formed in a chemical reaction called esterification, which typically involves the following reactants and products:
- Reactants:
1. Carboxylic Acid (R-COOH) - an organic compound with a carboxyl group.
2. Alcohol (R'-OH) - an organic compound with a hydroxyl group.
- Products:
1. Ester (R-COO-R') - the organic compound formed from the reaction.
2. Water (H₂O) - a byproduct of the reaction.
This reaction is often catalyzed by an acid, such as sulfuric acid (H₂SO₄).
What do acids and bases have in common?
O
A. They are both corrosive and can burn skin.
O
B. They both have pH values lower than 7.
O
C. They are both found in many foods.
O
D. They are both commonly used as cleaners.
Acids and bases have similarities such as being A. corrosive and B. They both have pH values lower than 7.
Explanation:Acids and bases have similarities such as being corrosive, having different pH values, and being found in many foods. Acids and bases have several similarities:
Both acids and bases can be corrosive and cause burns. For example, hydrochloric acid is highly corrosive, and sodium hydroxide, a strong base, is also corrosive.Both acids and bases have pH values that are different from neutral. Acids have pH values lower than 7, while bases have pH values higher than 7.Acids and bases are commonly found in many foods. Examples include citric acid in citrus fruits (acid) and sodium bicarbonate in baking soda (base).Therefore, the correct answer is B. They both have pH values lower than 7.
Learn more about Similarities between acids and bases here:https://brainly.com/question/11560939
#SPJ2
The volume of a cube that measures 10cm in length, 10 cm in width, and 10 cm in height is 1 L. True of False
Answer: False
Explanation:
1 Cubic centimeter (cm³) = 0.001 liter (L).
Volume of = 10 x 10 x 10 = 1000cm³
To convert cubic centimeters to liters, multiply the cubic centimeter value by 0.001 or divide by 1000.
Answer:
volume of this cube = 1000 cc which is 1 L
so true
The picture above shows the water cycle. In the water cycle, water travels from the land to the sky and back again. Water leaves the ocean through _______ and returns to the ocean through _______.
A.
evaporation; precipitation and run-off
B.
condensation; evaporation
C.
transpiration; precipitation and run-off
D.
run-off; condensation
The picture above shows the water cycle. In the water cycle, water travels from the land to the sky and back again. Water leaves the ocean through Evaporation and returns to the ocean through Precipitation and run-off.
Thank You ☺️ ☺️.
☆ ★ Make It Brainlist Answer Please.....Answer:
A
Explanation:
Brainiest
Remember do it today start now don’t wait
If a sample of hot water and cold water are mixed, energy will flow from the hot water to the cold water. The heat transfer will stop when
the mixture reaches a temperature between the two original temperatures.
True
Or
False
SrCl2 + 2AgNO3 reaction is what
Answer:
SrCl2 + 2AgNO3 ----> Sr(NO3)2 + 2AgCl (solid)
Explanation:
SrCl2 + 2AgNO3 ----> Sr(NO3)2 + 2AgCl (solid)
how to find final temperature
Answer:
to Calculate the final temperature of the water mixture using the equation T(final) = (m1_T1 + m2_T2) / (m1 + m2), where m1 and m2 are the weights of the water in the first and second containers, T1 is the temperature of the water in the first container and T2 is the temperature of the water in the second container.
To find the final temperature, use the reciprocal form of Charles's law to relate the initial and final temperatures and volumes of a gas.
Explanation:In order to find the final temperature, we can use the reciprocal form of Charles's law, which relates the initial and final temperatures and volumes of a gas. The equation is T1/V1 = T2/V2, where T1 and V1 are the initial temperature and volume, and T2 and V2 are the final temperature and volume. By rearranging the equation, we can solve for the final temperature:
T2 = (T1 * V2) / V1
Example: If the initial temperature is 20°C, the initial volume is 2 liters, and the final volume is 3 liters, we can substitute these values into the equation to find the final temperature:
T2 = (20 * 3) / 2 = 30°C
A small research submarine with a volume of 1.2 x 105 L has an internal pressure of 1.0 atm and an internal temperature of 150 C. If the submarine descends to a depth where the pressure is 150 atm and the temperature is 30 C, what will the volume of the gas inside be if the hull of the submarine breaks?
Answer:
V₂ = 570 L
Explanation:
Given data:
Initial volume = 1.2 ×10⁵ L
Initial pressure = 1 atm
Initial temperature = 150 °C (150 +273 = 423 K)
Final temperature = 30°C (30+273 = 303 K)
Final volume = ?
Final pressure = 150 atm
Formula:
P₁V₁/T₁ = P₂V₂/T₂
P₁ = Initial pressure
V₁ = Initial volume
T₁ = Initial temperature
P₂ = Final pressure
V₂ = Final volume
T₂ = Final temperature
Solution:
V₂ = P₁V₁ T₂/ T₁ P₂
V₂ = 1.0 atm × 1.2 ×10⁵ L × 303 K / 423 K × 150 atm
V₂ = 363.6×10⁵ L atm .L. K / 63450 K.atm
V₂ = 0.0057×10⁵ L
V₂ = 570 L
A student needed to make 100.0 mL of 0.20M NaOH solution. How many grams of sodium hydroxide does the student need to weigh out
Answer:
0.8 g
Explanation:
The molarity of a solution is calculated with the following formula:
[tex]M=\frac{n}{V}[/tex]
where:
n is the number of moles of the solute
V is the volume of the solution
In this problem we have:
V = 100.0 mL = 0.1 L is the volume of the solution
M = 0.20 is the molarity
So the number of moles of NaOH in the solution must be
[tex]n=MV=(0.20)(0.1)=0.02 mol[/tex]
The molar mass of NaOH is
[tex]M_m = 40 g/mol[/tex]
Therefore, the mass of NaOH needed in the solution is:
[tex]m=nM_m = (0.02)(40)=0.8 g[/tex]
Final answer:
To make 100.0 mL of a 0.20M NaOH solution, the student needs to weigh out 0.800 grams of sodium hydroxide, using the molar mass of NaOH (40.0 g/mol) and the volume of the solution in liters (0.100 L).
Explanation:
The subject of this question is how many grams of sodium hydroxide (NaOH) are needed to prepare a 100.0 mL of 0.20M NaOH solution. To determine the mass required, we use the molarity equation M = moles/L and rearrange it to find the number of moles of NaOH needed, which is Moles = Molarity × Volume (in liters).
First, convert the volume from mL to L:
100.0 mL × (1 L / 1000 mL) = 0.100 L.
Now, calculate the number of moles required for the solution:
0.20 M × 0.100 L = 0.020 mol NaOH.
With the number of moles and the molar mass of NaOH, which is 40.0 g/mol, we can find the mass needed:
0.020 mol NaOH × 40.0 g/mol = 0.800 g of NaOH.
Therefore, the student needs to weigh out 0.800 grams of sodium hydroxide to make their solution.
Imagine that you have a partially inflated tire. If you add approximately two pumps more air into it from your tire pump, what do you expect to change when you compare the starting and ending state of the tire? Check all of the boxes that apply: volume temperature pressure moles of air molecules
Answer:
A C D
on edg 2021
Explanation:
The answers are:
A. volumeC. pressureD. moles of air moleculesWhat is the molar mass for Iron(I) Phosphate?
Hey there!
I think you meant to put iron (II) phosphate, because iron (I) phosphate isn't a thing.
So the formula for iron (II) phosphate is Fe₃(PO₄)₂.
Molar mass:
Fe: 3 x 55.845 = 167.535
P: 2 x 30.97 = 61.94
O: 8 x 16 = 128
-------------------------------------
357.475 grams/mole
The molar mass of iron(II) phosphate is 357.475 g/mol.
Hope this helps!
The molar mass for Iron(II) Phosphate is 176.124 g/mol, found by summing the molar masses of iron and phosphate. This calculation involves considering the atomic masses multiplied by the number of atoms in the compound.
The molar mass for Iron(II) Phosphate is computed to be 176.124 g/mol. To determine this, you start by finding the individual molar masses of iron and phosphate and then adding them up according to the compound's formula.
For Iron(II) Phosphate, you'd have 3 iron atoms with a total molar mass of 167.8 g/mol and 2 phosphate ions with a total molar mass of 8.324 g/mol, giving a total molar mass of 176.124 g/mol.
carrying capacity is the maximum population that a given area can support.
am I right???
There will be change in the population of a species everyday. The carrying capacity is the maximum population that a given area can support. Thus the given statement is right.
What is carrying capacity?The carrying capacity is defined as the maximum population, density or biomass that a specific area can support sustainably. This likely changes over time and also depends on many environmental factors, presence of predators, etc.
It is the carrying capacity which denotes the point where the population cannot grow further theoretically and it is not growing any larger. It can be increased by supplying greater amount of food, decreasing predation, raising the amount of habitat, etc.
It can be decreased by increasing predation, decreasing the amount of habitat, etc. A constant K is used to represent the carrying capacity. It is due to this the population is found to be in a stable state.
Thus carrying capacity is the maximum population that a given area can sustain.
To know more about carrying capacity, visit;
https://brainly.com/question/5404033
#SPJ6
How does the value of compare with the concentrations of hydronium ion and hydroxide ion?
Answer:
A. Ka X Kb = [H3O+][OH-]
Answer:
A. Ka x Kb = [H3O+] [OH-]
Explanation:
Give a brief definition and example of cognitive dissonance
Answer:Cognitive dissonance refers to a situation involving conflicting attitudes, beliefs or behaviors. ... For example, when people smoke (behavior) and they know that smoking causes cancer (cognition), they are in a state of cognitive dissonance.
Answer:
Cognitive dissonance refers to a situation involving conflicting attitudes, beliefs or behaviors. For example, when people smoke (behavior) and they know that smoking causes cancer (cognition), they are in a state of cognitive dissonance.
Explanation:
Convert the following mass of a compound into moles.
23.5g of NaCl
Answer:
0.402 moles
Explanation:
1 mole NaCl/58.44g Nacl ×23.5g NaCl
grams get cancelled out and you are left with moles
[H+] = 1.0 x 10-5 M
What’s the ion concentration ?
Answer:
pH = +5
Explanation:
pH = - log [H+]
pH = - log (1×10^-5)
pH = 5.
Which type of fault is under compression
Answer:
reverse fault
Explanation:
A reverse fault takes place when two earth's crust pieces are pushed together.The location at which the collision between the two tectonic plates takes place is called a convergent boundary.
Explain the process of root wedging.
Answer:
Root Wedging is the process in which roots grow into the cracks in rocks and force the cracks open as they continue to grow.
Explanation:
WEATHER PREDICTIONS FROM
METEOROLOGISTS BASED ON SATELLITE
DATA
O These predictions are likely to be valid and
should be heeded.
These predictions are not likely to be valid
and can be dismissed.
Answer:
These predictions are likely to be valid and should be needed.
Explanation:
Meteorologist made predictions about weather of a particular area on the data they received from the satellite. Meteorology is a branch of science in which we study about the atmosphere. It is mainly used for the forecasting of weather and meteorologists are those people or scientists who study the weather and research on different scales or instruments of weather.
name the hydrocarbons
Answer:
Hexane
Explanation:
This is a simple Alkane with six cabrons therefore the prefix "Hex-" is applied. Since the molecule has no double bonds it will have the ending "-ane"
Answer:
Hexane
Explanation:
Which of the following are part of the Carbon Cycle? A. respiration B. combustion C. photosynthesis D. decomposition E. all of the above
Answer:
E. All of the Above
Explanation:
Because it requires all to create and reuse carbon
Which describes the two cells formed through mitosis?
Answer:
Mitosis forms two daughter cells. The daughter cells will be exactly the same as the parent cell. Skin cells, liver cells, and generally all somatic cells undergo mitosis besides sex cells.
Explanation:
plz brainlest
hope this helps
cutie :)
The diagram to the right shows energy for two
reactions, A and B.
Which reaction has the higher Gpx?
Answer:
They are the same
I did the activity
Both reaction have same energy. nergy is always assigned based on its nature once it has been transmitted.
What is energy?Energy is the ability to perform work in physics. It could exist in several different forms, such as potential, kinetic, electrical, chemical, thermal, electrical, radioactive, etc. Additionally, there is heat and work, which is energy being transferred form one body to other. Energy is always assigned based on its nature once it has been transmitted.
Motion is a property of all energy types. For instance, if a body is moving, it possesses kinetic energy. Even while at rest, a tensioned object like a spring or bow has the ability to move; this is because of its design, which includes potential energy. Both reaction have same energy.
Therefore, both reaction have same energy.
To know more about energy, here:
https://brainly.com/question/29763772
#SPJ2
Caclulate the pH of a solution with a hydrogen ion concentration of 1X10-7
Answer:
The pH of the solution is 7.00 .
Explanation:
The pH gives us an idea of the acidity or basicity of a solution. More precisely, it indicates the concentration of H30 + ions present in said solution. The pH scale ranges from 0 to 14: from 0 to 7 corresponds to acid solutions, 7 neutral solutions and between 7 and 14 basic solutions. It is calculated as:
pH = -log (H30 +)
pH= -log (1x10^-7)
pH= 7.00
A 32 g sample of LiCl is dissolved in water to for 655 mL of solution. What is the molarity of the solution?
1.1 x 10-3 M LICI
1.1 M LICI
4.9 x 10-2 M LICI
49 M LICI
Answer : The molarity of the solution is, 1.1 M LiCl
Explanation : Given,
Mass of [tex]LiCl[/tex] = 32 g
Volume of solution = 655 mL
Molar mass of [tex]LiCl[/tex] = 42.4 g/mole
Molarity : It is defined as the number of moles of solute present in one liter of volume of solution.
Formula used :
[tex]\text{Molarity}=\frac{\text{Mass of }LiCl\times 1000}{\text{Molar mass of }LiCl\times \text{Volume of solution (in mL)}}[/tex]
Now put all the given values in this formula, we get:
[tex]\text{Molarity}=\frac{32g\times 1000}{42.4g/mole\times 655mL}=1.1mole/L=1.1M[/tex]
Therefore, the molarity of the solution is, 1.1 M LiCl
The molarity of the LiCl solution is 1.15 M.
Explanation:To calculate the molarity of the solution, we first need to convert the mass of LiCl to moles using the molar mass of LiCl. The molar mass of LiCl is 6.94 g/mol + 35.45 g/mol = 42.39 g/mol. Therefore, the number of moles of LiCl is:
32 g ÷ 42.39 g/mol = 0.755 mol
Next, we divide the number of moles by the volume of the solution in liters to calculate the molarity:
0.755 mol ÷ 0.655 L = 1.15 M LiCl
Calculate the specific heat capacity of a new alloy if a 15.4 g sample absorbs 297 Joules when it is heated from 5.0 °C to 20.7 °C. The key assumes you are giving your answer in Joules/g°C and rounding to 2 or 3 sig figs
Answer: The specific heat of alloy is [tex]1.23J/g^0C[/tex]
Explanation:
The quantity of heat required to raise the temperature of a substance by one degree Celsius is called the specific heat capacity.
[tex]Q=m\times c\times \Delta T[/tex]
Q = Heat absorbed = 297 J
m= mass of substance = 15.4 g
c = specific heat capacity = ?
Initial temperature = [tex]T_i[/tex] = 5.0°C
Final temperature = [tex]T_f[/tex] =20.7°C
Change in temperature ,[tex]\Delta T=T_f-T_i=(20.7-5.0)^0C=15.7^0C[/tex]
Putting in the values, we get:
[tex]297J=15.4g\times c\times 15.7^0C[/tex]
[tex]c=1.23J/g^0C[/tex]
The specific heat of alloy is [tex]1.23J/g^0C[/tex]
The specific heat capacity of the new alloy is approximately 1.22 J/g°C.
Calculating Specific Heat Capacity:
To calculate the specific heat capacity of a new alloy, we use the formula:
q = mcΔTWhere:
q = heat absorbed (297 Joules)m = mass (15.4 g)c = specific heat capacity (J/g°C)ΔT = change in temperature (20.7 °C - 5.0 °C) = 15.7 °CRearranging the formula to solve for c:
[tex]c = \frac{q}{m\Delta T} = \frac{297\ J}{15.4 g \times 15.7 ^\circ C} \approx 1.22 J/g^\circ C[/tex]Therefore, the specific heat capacity of the alloy is approximately 1.22 J/g°C.
whose the real dirty dan?
Answer:
Sandy references him in a dream during hibernation as a Texas outlaw, before SpongeBob and Patrick create a game where they would fight over the titles of Pinhead Larry and Dirty Dan. SpongeBob pretends to be him at first, but at the end of the fight, Patrick is titled as Dirty Dan.
Hope it helps you
Plz mark brainliest and follow me ❤❤❤❤❤
Explanation:
Answer:
He isn't real, he's just an imaginative character from one of Sandy's dreams.
Which is the equation of a circle with its center at (-4,2) and a radius of 4?
Select one:
a. (x+4)2 + (y-2)2 = 16
b. (x-4)2 + (y+2)2 = 16
c. (x-4)2 + (y+2)2 = 4
d. (x+4)2 + (y-2)2 = 4
Which of the following statements is true about cellular respiration?
It converts energy into food.
It breaks down food to release energy.
It turns carbon dioxide into water.
It turns water into carbon dioxide.
Answer:
it breaks down food to release energy
Answer: I believe the answer is B) It breaks down food to release energy!!!!
If you have a 550-gram sample of carbon-14 how much remains after 7 half-lives.
Final answer:
After 7 half-lives, approximately 2.15 grams of carbon-14 will remain from the original 550-gram sample.
Explanation:
The question asks how much remains after 7 half-lives of a 550-gram sample of carbon-14. To solve this, we need to understand that each half-life reduces the amount of carbon-14 by half. So after the first half-life, we have 275 grams left, after the second half-life, we have 137.5 grams left, and so on. After 7 half-lives, we will have:
275 grams / 2 = 137.5 grams137.5 grams / 2 = 68.75 grams68.75 grams / 2 = 34.375 grams34.375 grams / 2 = 17.1875 grams17.1875 grams / 2 = 8.59375 grams8.59375 grams / 2 = 4.296875 grams4.296875 grams / 2 = 2.1484375 gramsSo, after 7 half-lives, we will have approximately 2.15 grams of carbon-14 remaining from the original 550-gram sample.