How many valence electrons are in the trimethylammonium ion ch33nh+ ?

Answer: all other conditions equal, the rate evaporation of a contained liquid will be slower than the rate of evaporation of an uncontained liquid.

Justification:

1) The rate of evaporation increases as the surface area of the liquid (relative to the whole content) increases. This is, the greater the surface is the faster the evaporation.

2) That is so because the higher the surface of the liquid the more the number of particles in the liquid that are in contact with the surrounding air and so the more the particles will escape from the liquid to the air (which is what evaporation is).

3) A liquid contained will take the form of the container, so part of the liquid wil remain below the surface, while an uncontained liquid will spread all over the surface and so pratically all the liquid is in contact witht the air surrounding it.

Answer:

[tex]8.75~g~CaO[/tex]

Explanation:

First we have to start with the reaction:

[tex]HgS~+~CaO~->~Hg~+~CaS~+~CaSO_4[/tex]

The next step is to balance the reaction, we can start with Oxygen, so:

[tex]HgS~+~4CaO~->~Hg~+~CaS~+~CaSO_4[/tex]

Then we can continue with Ca:

[tex]HgS~+~4CaO~->~Hg~+~3CaS~+~CaSO_4[/tex]

Then we can balance S:

[tex]4HgS~+~4CaO~->~Hg~+~3CaS~+~CaSO_4[/tex]

And finally with Hg:

[tex]4HgS~+~4CaO~->~4Hg~+~3CaS~+~CaSO_4[/tex]

With the balance reaction we know that the molar ratio between Hg nd CaO is 4:4. Therefore, the nex step is the conversion of 31.28 g Hg to moles of Hg using the atomic mass of Hg (200.59 g/mol).

[tex]31.28~g~Hg\frac{1~mol~Hg}{200.59~g~Hg}[/tex]

[tex]0.156~mol~Hg[/tex]

The next step, using the molar ratio (4:4) and the molar mass of CaO (56.1 g/mol) we can calculate the grams of CaO that we need:

[tex]0.156~mol~Hg\frac{4~mol~CaO}{4~mol~Hg}\frac{56.1~g~CaO}{1~mol~CaO}[/tex]

[tex]8.75~g~CaO[/tex]

Answer : The mass of chlorine gas produced are, 26.95 grams.

Explanation : Given,

Mass of HCl = 27.8 g

Molar mass of HCl = 36.46 g/mole

First we have to calculate the moles of hydrochloric acid.

[tex]\text{Moles of HCl}=\frac{\text{Mass of HCl}}{\text{Molar mass of HCl}}=\frac{27.8g}{36.46g/mole}=0.76mole[/tex]

Now we have to calculate the moles of chlorine gas.

The given balanced chemical reaction is,

[tex]4HCI(aq)+O_2\rightarrow 2CI_2(g)+2H_2O(I)[/tex]

From the given balanced chemical reaction, we conclude that

As, 4 moles of hydrochloric acid react to give 2 moles of chlorine gas

So, 0.76 moles of hydrochloric acid react to give [tex]\frac{2}{4}\times 0.76=0.38[/tex] moles of chlorine gas

Now we have to calculate the mass of chlorine gas.

[tex]\text{Mass of }Cl_2=\text{Moles of }Cl_2\times \text{Molar mass of }Cl_2[/tex]

Molar mass of [tex]Cl_2[/tex] = 70.91 g/mole

[tex]\text{Mass of }Cl_2=0.38mole\times 70.91g/mole=26.95g[/tex]

Therefore, the mass of chlorine gas produced are, 26.95 grams.

The molality of a solution prepared by dissolving 175 g of KNO₃ in 750 g of water is 2.3m.

Molaity is used to define the concentration of any material present in any substance and it will be calculated as:

Molality = Moles of solute / kilograms of solvent

According to the question,

Mass of solute KNO₃ = 175g

Mass of solvent = 750g = 0.75kg

Moles of solute KNO₃ will be calculated as:

n = W/M, where

W = given mass

M = molar mass = 101.1 g/mol

n = 175 / 101.1 = 1.73 moles

On putting values, we get

m = 1.73 / 0.75 = 2.3m

Hence molality of given sample is 2.3m.

To know more about molality, visit the below link:

https://brainly.com/question/14973233

Adding a base to water triggers a base ionization reaction, resulting in the formation of hydroxide ions and a conjugate acid, which increases the solution's pH. Strong bases fully dissociate, while weak bases only partially ionize.

When a base is added to water, a base ionization reaction occurs. This reaction involves the transfer of protons from water molecules to the base molecules, producing hydroxide ions (OH-) and a conjugate acid of the base. For instance, if we take pyridine, C5NH5, as a base, adding it to water will result in the formation of hydroxide ions and pyridinium ions. This process increases the pH of the solution as it raises the concentration of hydroxide ions. Strong bases, like soluble ionic hydroxides (e.g., NaOH), dissociate completely in water, leading to a significant increase in OH- concentration, while weak bases yield a smaller proportion of hydroxide ions.

A general reaction for base ionization can be represented as B(aq) + H₂O(l) ⇒ HB*(aq) + OH⁻(aq), where B is the base and HB* is the conjugate acid formed. This reaction is essential for understanding acid-base chemistry, where bases are seen as proton acceptors and their strength can be gauged by how completely they ionize in water.

Final answer:

The plateau in the rate of enzyme-catalyzed reactions at high substrate concentrations occurs because all enzyme active sites become occupied, preventing further increases in reaction rate.

Explanation:

The reaction rate of an enzyme-catalyzed reaction plateaus at higher substrate concentrations because all of the enzyme molecules become saturated with substrate. Initially, as the substrate concentration increases, more active sites on the enzyme molecules are available, leading to an increase in the reaction rate. However, at a certain point, termed the saturation point, all the active sites are occupied, making enzymes unavailable to bind with additional substrate molecules until the current substrate is converted to product and released. This results in a leveling off of the reaction rate, and the reaction cannot proceed any faster regardless of further increases in substrate concentration. This concept is highlighted by the fact that at substrate concentrations higher than 4 X10-5 M, reaction rates do not increase because the enzymes are already working at their maximal rate.

Number of moles equals of potassium iodide;

The molar mass of potassium iodide is 166 g/mole

Moles = 300/166

            = 1.8072moles

According to the equation;

2 moles of KI produces 1 mole of PbI2 9lead (ii) iodide

Therefore; the number of moles of lead (ii) iodide produced will be;

                = 1.8072/2

                = 0.9036moles

Thus the number of moles of lead (ii) iodide is 0.904 mole

Answer : The correct option is, (d) 0.904 mole

Explanation : Given,

Mass of potassium iodide = 300 g

Atomic mass of potassium iodide = 166 g /mole

First we have to calculate the moles of potassium iodide.

[tex]\text{Moles of KI}=\frac{\text{Mass of KI}}{\text{Molar mass of KI}}=\frac{300g}{166g/mole}=1.807mole[/tex]

Now we have to calculate the moles of lead(ii) iodide.

The given balanced chemical reaction is,

[tex]Pb(NO_3)_2+2KI\rightarrow PbI_2+2KNO_3[/tex]

From the given balanced chemical reaction, we conclude that

As, 2 moles of potassium iodide react to give 1 mole of  lead(ii) iodide

So, 1.807 moles of potassium iodide react to give [tex]\frac{1.807}{2}=0.904[/tex] mole of  lead(ii) iodide

Therefore, the number of moles of lead(ii) iodide produced are, 0.904 mole

Answer:

The correct answer is 2.60 moles.

Explanation:

The balanced equation is:  

4P + 5O₂ ⇒ 2P₂O₅

The number of moles of O₂, n = mass/molar mass

208 g / 32 g/mol = 6.5 mol

From the balanced equation,  

5 moles of O₂ reacts with 2 moles of P₂O₅

So, 6.5 moles of O₂ reacts with M moles of P₂O₅

M = 6.5 × 2/5

= 2.6 moles

Therefore, the required moles of P₂O₅ are 2.60 moles.  

Final answer:

To find the mass of 2.75 x 10²¹atoms of Lithium, we first calculate the number of moles of Li and then use its molar mass. The mass is found to be 0.0317 g, which is option (b).

Explanation:

The question asks for the mass in grams of 2.75 x 10²¹ atoms of Lithium (Li). First, we need to calculate the number of moles of Li this number of atoms represents. Knowing that one mole contains 6.02 x 10²³atoms, the number of moles is calculated as follows:

(2.75 x 10²¹ atoms) / (6.02 x 10²³atoms/mol) = 4.57 x 10⁻³ mol

Next, using the molar mass of Li, which is 6.94 g/mol, we can find the mass of Li:

(4.57 x 10⁻³ mol) x (6.94 g/mol) = 0.0317 g

Therefore, the mass of 2.75 x 10²¹ atoms of Li is 0.0317 g, which corresponds to option (b).

To check whether a molecule is coplanar, look for a plane of symmetry, which indicates that all atoms lie within the same plane. Models or visualization software can assist with this task. It is especially important to consider different conformations of the molecule as it may exhibit coplanarity only in certain orientations.

Checking if a molecule is coplanar involves determining whether all of its atoms reside in the same geometric plane. To assess coplanarity, a method often used is looking for a plane of symmetry. This is a hypothetical plane that bisects the molecule such that one half is the mirror image of the other half. If all atoms lie on or symmetrically around this plane, the molecule is planar. In a coplanar molecule, the molecule is cyclic, meaning it forms a ring, and planar since all atoms lie within the same plane.

For molecules with known stereocenters, which are atoms—typically carbons—bonded to four different substituents, the presence of multiple stereocenters can sometimes suggest a lack of coplanarity; however, when these stereocenters are arranged symmetrically (as in meso compounds), the molecule can still exhibit coplanarity. Using models or software to visualize the three-dimensional structure of the molecule can assist in this process, especially when manual inspection on paper is challenging.

If you cannot easily visualize the symmetry in a molecule, constructing a three-dimensional model may help to identify the presence of a plane of symmetry—or lack thereof. It's important to consider that some molecules may only demonstrate coplanarity in certain conformations, so examining the molecule in different orientations could be necessary for an accurate determination.

Answer:

U-235 and U-238 are two radioactive isotopes of Uranium. The main difference between U-235 and U-238 is that the number of neutrons present in the U-235 nucleus is 143 whereas the number of protons present in the U-238 nucleus is 146.

Explanation:

Answer: The minimum force by which player should hit the puck to move it is 0.102 N.

Explanation:

Weight of the puck = 1.70 N

This weight of the puck is the force acting normal to the surface that is:

N = 1.70 N

The coefficient of friction =[tex]\mu _f=0.0600[/tex]

Frictional force = [tex]F_f=\mu _f\times N=0.0600\times 1.70 N=0.102 N[/tex]

The minimum force by which player should hit the puck to move it is 0.102 N.

Changing lead into gold requires changing the number of protons in the lead atoms, a process known as nuclear transmutation. This process is highly complex, energy intensive and has many potential risks, making it unfeasible as a method of gold production.

The process of changing one element into another, such as changing lead into gold, would require the manipulation of its atomic structure. The atomic structure of an atom is primarily dictated by the number of protons it has, which determines its atomic number and essentially defines the kind of element it is. In the case of lead and gold, lead has 82 protons and gold has 79 protons.

To turn lead into gold, scientists would have to remove 3 protons from each atom, which is an incredibly difficult task. This process, known as nuclear transmutation, would require a significant amount of energy and highly advanced technology. Even then, the process is far from efficient and produces a number of problems including the release of harmful radiation and the production of unstable, radioactive isotopes.

Furthermore, changing the number of neutrons and electrons in a lead atom alone would not turn it into gold; the number of protons must be changed. So the correct statement from the options provided is that scientists would have to change the number of protons in lead atoms to transform it into gold. However, due to the immense difficulty and possible risks involved, this is not a viable option for gold production.

https://brainly.com/question/32135659

#SPJ2

Answer: B. [tex]KOH[/tex]

Explanation:

According to the Arrhenius concept, an acid is a substance that ionizes in the water to give hydronium ion or hydrogen ion [tex](H^+)[/tex] and a bases is a substance that ionizes in the water to give hydroxide ion [tex](OH^-)[/tex].

According to the Bronsted Lowry conjugate acid-base theory, an acid is defined as a substance which donates protons and a base is defined as a substance which accepts protons.

According to the Lewis concept, an acid is defined as a substance that accepts electron pairs and base is defined as a substance which donates electron pairs.

[tex]KOH\rightarrow K^++OH^-[/tex]: is a Arrhenius base.

[tex]NH_3+H^+\rightarrow NH_4^+[/tex] : is a lewis base as it donates the lone pair of electrons.

[tex]HCl\rightarrow H^++Cl^-[/tex] is a Arrhenius acid and bronsted lowry acid.

Answer:

The given statement is false.

Explanation:

When the prairie soils are brought under cultivation, the fraction of soil organic compound carbon that disappears most briskly is not the passive fraction. Humus is considered as the passive fraction of soil organic matter. It is a complex and dark amalgamation of organic components, which have been modified substantially from the native form over time, and it also comprises other components that have been produced by soil organisms.  

Prairie soils are the dark fertile soils, which are produced due to the gathering of organic matter generated by dense root systems of prairie grasses. Most of these soils are witnessed in temperate regions with varying environments. They are considered as the most fertile soils found on the planet and the majority of the products used by humans comes from these kinds of soils.