Identify the independent and dependent variables. Peter is conducting an experiment to see how much salt will dissolve in water as the temperature of the water is increased.

BAS might be an improperly capitalized: BAs, BaS

PTF2 might be an improperly capitalized: PtF2

BAF2 might be an improperly capitalized: BaF2

PTS might be an improperly capitalized: PtS

Answer:

BaS + PtF2 → BaF2 + PtS

Explanation:

This is an Double Replacement Reaction, so the products gonna be Barium fluoride and Platinum sulfide.

BaS + PtF → BaF + PtS

The question does not contain any relevant information or topic.

This question contains a series of unrelated and nonsensical words and phrases, which do not provide any coherent information. It is difficult to determine the specific subject or grade level of this question. The content appears to be random text and does not relate to any specific topic or subject.

Learn more about N/A here:

https://brainly.com/question/17430688

#SPJ12

Water (H2O) and Sodium (Na) are reactants.

2H2O+2Na......2NaOH+H2

In the above reaction the water (H2O) and sodium (Na) are reactants and sodium hydroxide (NaOH) and hydrogen are products.

And this is the single displacement reaction.

Final answer:

In the equation 2H2O + 2Na → 2NaOH + H2, water (H2O) and sodium (Na) are the reactants, while sodium hydroxide (NaOH) and hydrogen gas (H2) are the products.

Explanation:

In the chemical reaction 2H2O + 2Na → 2NaOH + H2, the reactants are the substances that start the reaction. In this case, the reactants are water (H2O) and sodium (Na). When sodium metal is placed in water, a reaction occurs where these reactants transform into the products, which are sodium hydroxide (NaOH) and hydrogen gas (H2).

Specifically, solid sodium reacts with liquid water, producing molecular hydrogen gas and ionic compound sodium hydroxide, which is a solid in pure form but readily dissolves in water to form an aqueous solution.

Air is in the state of matter known as a gas. While it can sometimes contain particles from other states (liquid or solid), these are suspended within the air, and the air itself remains a gas. Air is not normally in the state of plasma on Earth.

Air is considered to be in the state of matter known as a gas. This is one of the three most common states of matter, the others being solid and liquid. Gases have the property of conforming both to the shape and volume of their container. They can be compressed or expanded, unlike solids or liquids, which have a fixed volume.

Occasionally, air might contain particles from other states of matter, such as small droplets of water (a liquid) or dust (a solid). However, these are not part of the air itself, but suspended within it, so the air still remains a gas.

There is also another state of matter called plasma, which is like a gas but with some of the atoms ionized. This state of matter, typically found in high-temperature environments like stars and lightning strikes, is distinct from gases. However, under normal conditions on Earth, air is not a plasma but a gas.

https://brainly.com/question/29476563

#SPJ6

To visually represent a polymer, Georgina should use building blocks like atomic model kits, jelly tots, playdough, and toothpicks to build models of monomers such as ethene, propene, or vinyl chloride. These materials can effectively demonstrate the connection between monomers to form a polymer chain, serving as an educational tool for understanding molecular models and polymer chemistry.

Georgina wants to visually represent a polymer. The best model for representing a polymer would be building blocks, such as atomic model kits, jelly tots, playdough, and toothpicks. These materials provide the flexibility needed to showcase how individual monomers can be connected to form more complex structures, mimicking the actual chemical bonding of polymers. For example, if one were to build models of ethene, propene, or vinyl chloride monomers, they could use colored balls or jelly tots to represent the atoms and use toothpicks or sticks to represent the bonds between them, creating clear visual representations of each monomer.

By connecting these basic structures together, one can simulate the formation of a polymer chain. This hands-on approach helps illustrate the concept of monomers linking to form polymers and enhances the understanding of the molecular models and the chemical properties of the individual building blocks or functional groups within the polymer structure.

Answer:-  6200 kg

Solution:- Volume of bromine is given as [tex]2.0m^3[/tex] and it's density is [tex]\frac{3.1g}{mL}[/tex]. It asks to calculate the mass of bromine in kg.

We need to do the unit conversions for volume from [tex]m^3[/tex] to [tex]cm^3[/tex] and then mL. After this the volume is multiplied by density to get the mass in grams that could further be converted to kg. The set is shown as:

[tex]2.0m^3(\frac{(100cm)^3}{1m^3})(\frac{1mL}{1cm^3})(\frac{3.1g}{1mL})(\frac{0.001kg}{1g})[/tex]

= 6200 kg

So, the mass of bromine in the given volume of it is 6200 kg.

Final answer:

To find the mass in kg of 2.0 m3 of Br2, we convert the volume to cm3, use the given density to find the mass in grams, and then convert the mass to kilograms, resulting in 6,200 kg.

Explanation:

The question asked is: What is the mass (in kg) of 2.0m3 of Br2? Given that 1 mL is equal to 1 cm3 and 3.1 g Br2 = 1 mL Br2, the first step is to convert the given volume in meters cubed (m3) to cubic centimeters (cm3). Knowing that 1 m = 100 cm, we cube both sides to get 1 m3 = 1,000,000 cm3 or 106 cm3.

Therefore, 2.0 m3 = 2.0 × 106 cm3. Next, we use the density of Br2 to find the mass: 3.1 g/cm3. So, the mass of 2.0 m3 of Br2 in grams is 2.0 × 106 cm3 × 3.1 g/cm3 = 6,200,000 g. To convert this to kilograms, we divide by 1,000, resulting in 6,200 kg.

look it nup on google should help

Final answer:

The density of water decreases slightly below 1000 kg/m³ as temperatures increase from 4°C to 50°C. At 150°C, water would be a gas with much lower density. This behavior is due to the unique molecular structure and hydrogen bonding in water.

Explanation:

The question regarding the density of water at different temperatures touches on fundamental principles of chemistry and physics. The unique properties of water mean that its density does not simply decrease linearly with temperature. Instead, due to hydrogen bonding and molecular structure, water is at its densest at around 4°C. As the temperature increases from 4°C, the density of liquid water decreases due to increased molecular movement that causes water molecules to occupy more space. Therefore, at 50°C, we can predict the density of water would be slightly lower than its maximum density at 4°C, likely a little under 1000 kg/m³. At 150°C, water would be in a gaseous state under normal atmospheric pressure, and thus its density as a gas would be significantly lower than as a liquid.

The scientists study seismographs to know about the force and the time duration of the earthquake.

The instrument known as seismogram  that makes a record of seismic waves create because of the  earthquake and explosion, or other Earth-shaking phenomenon.

Seismographs are made up  with electromagnetic sensors that then translate ground motions into change in electrical field , which are then processed and recorded by the instruments for further analysis.

Therefore, scientists study seismographs to know about the force and the time duration of the earthquake.

Learn more about seismographs ,here:

https://brainly.com/question/1828024

#SPJ6

Answer : The energy of a photon is [tex]18.619\times 10^{-20}J[/tex].

Solution : Given,

Frequency of a photon = [tex]2.81\times 10^{14}s^-[/tex]

Planck' constant = [tex]6.626\times 10^{-34}Js[/tex]

Formula used :

[tex]E=h\nu[/tex]

where,

E = Energy of a photon

h = Planck's constant

[tex]\nu[/tex] = Frequency of a photon

Now put all the given values in above formula, we get

[tex]E=(6.626\times 10^{-34}Js)\times (2.81\times 10^{14}s^-)[/tex] [tex]=18.619\times 10^{-20}J[/tex]

Thus, the energy of a photon is [tex]18.619\times 10^{-20}J[/tex].

The correct answer is 1) Ag, Si, I₂

Ag or silver is a metal. Silver is a transition element which lies in the d-block of the periodic table.

Si or silicon is a metalloid. Silicon is a metalloid which lies in the p-block of the periodic table.

I₂ or iodine is a nonmetal. Iodine is a halogen which lies in group 17 of the periodic table. All halogens are nonmetals.

Option 1: Ag, Si, I2 is the correct answer, where Ag is a metal, Si is a metalloid, and I2 is a nonmetal. These elements exhibit distinctive properties of metals, metalloids, and nonmetals.

The correct answer is option 1: Ag, Si, I2. In this group, Ag (Silver) is a metal, Si (Silicon) is a metalloid, and I2 (Iodine) is a nonmetal. Metals are elements that have properties such as good electrical and thermal conductivity, malleability, ductility, and a shiny appearance. Metalloids, on the other hand, have properties of both metals and nonmetals. Nonmetals are typically poor conductors of heat and electricity, and they aren't malleable or ductile; they are brittle.

https://brainly.com/question/20573603

#SPJ3

The more solid a substance is, the less kinetic energy there is. This is because there is not a lot of space for the atoms in the solid state to move. However, in the gaseous state, the atoms are far apart with plenty of space, this lets them create a lot more kinetic energy. Solids have a lot more intermolecular forces because the atoms are together. The IMF (intermolecular force) is what lets the atoms/molecules stick together. In the solid state, all the atoms are stuck together with little to no room in between. In the liquid state, it has a lot of IMF but is weaker then the IMF in the solid state. This is why you have so much resistance when you try to move through water. In the gaseous state, there is little to no IMF because the atoms are all so far apart. This makes it easier for everyone to move around.

To answer your question more directly: As the substance is heated to its melting point, there is an increase in kinetic energy, but decrease in intermolecular forces.

As a substance is heated, the increase in kinetic energy of its particles overcomes the intermolecular forces holding them together, leading to the substance's melting.

When a substance is heated, the kinetic energy of its particles increases. The molecules in the substance start moving faster, which essentially means that their kinetic energy is increasing. This increase in kinetic energy helps overcome the forces of attraction holding the molecules together, or the intermolecular forces.

As this heat energy continues to be applied, the molecules gain enough energy to break free from these attractive forces leading to the transformation from a solid to a liquid. This energy required to change a solid into a liquid at its melting point is referred to as the heat of fusion. The higher the intermolecular forces in a substance, the higher the kinetic energy (or heat) needed to get the substance to melt.

Therefore, in summary, heating a substance increases the kinetic energy of its particles, which helps overcome the intermolecular forces that hold the particles together, leading to the melting of the substance when the particles have enough energy to break free.

https://brainly.com/question/32026597

#SPJ2

The shaded area labeled as 2 is likely to have subatomic particle that are constantly in motion.

The subatomic particles of the atom that are constantly in motion are called as electrons. The probability of finding electrons in the region shaded and labeled as 2. Electrons are in continuous motion in orbits around the nucleus of the atom. Therefore, the answer is 2.

answer: 2 and 4

looking at the diagram, we know that 1 and 3 are both in the nucleus which contain both protons (positive charge) and neutrons (neutral charge). the outer area, or "cloud" (2), contains electrons that are in constant motion. number 4 is located in the electron cloud with the name "orbitals" which showcase "waves" created by the movement of an electron in an atom. knowing how electrons are always moving due to their charge, locations 2 and 4 would possess subatomic particles that are constantly in motion.

i also took the test !!  

Among these elements the strontium (Sr) has lowest first ionization energy.

The first ionization energy is the energy required to remove one mole of the most loosely held electrons from one mole of gaseous atoms to produce 1 mole of gaseous ions each with a charge of 1+.

The first of two main methods which scientists use to calculate the ionization energy is the Subtraction Method.

Answer:

Sr

Explanation:

Answer: Evaporation and condensation are the two changes in state which are most represented in water cycle.

Explanation:

A process of circulation of water by passing through different states between the atmosphere, oceans and land is known as water cycle.

In water cycle, the most represented changes in state are evaporation and condensation. As during evaporation, the water present in the oceans, rivers, wells or on the land evaporates because of the heat from the sun as a result the liquid state is changing into gas.

Whereas, during condensation gas or water vapours changes into liquid. For example, when water condenses in the atmosphere it results in the formation of clouds.

Thus, it can be concluded that evaporation and condensation are the two changes in state which are most represented in water cycle.

Evaporation and condensation are the two primary changes of state represented in the water cycle, where water continually transitions between liquid and gas as it is heated by the sun and cools in the atmosphere.

The two changes in state that are most represented in the water cycle are evaporation and condensation. During evaporation, liquid water is transformed into water vapor, a gas, as it gains heat from the sun or the air. This water vapor then rises into the atmosphere. When the water vapor cools, it undergoes condensation, turning back into liquid water and forming clouds. These two processes play a vital role in the recycling of water on Earth and are essential aspects of the global climate system.

Evaporation and condensation, respectively, represent the equilibrium between the liquid and gas states of water. They are continually occurring throughout the Earth's surface and atmosphere, driving the water cycle and influencing weather and climate.

The statement of mass number of an atom is "the number of protons plus the number of neutrons in a nucleus."

The total number of protons and neutrons in an atomic nucleus is known as the mass number, often known as the atomic mass number or nucleon number. Each atom also has a mass number, which is represented by the symbol A. The atom's mass number equals the sum of the number of protons and neutrons in the nucleus.

Protons + neutrons = mass number

Hence the correct answer is the number of protons plus the number of neutrons in a nucleus.

Learn more about mass number here

https://brainly.com/question/18803094

#SPJ2

Answer is:  germanium is represented by the electron configuration in example B.

Electron configuration of an element: 1s²2s²2p⁶3s²3p⁶4s²3d¹⁰4p².

According to electron configuration, this element has 32 electrons.

Element with 32 electrons and 32 protons (atomic number 32) is germanium.

Germanium (symbol: Ge) is a lustrous, hard, grayish-white metalloid in the carbon group.

The element that can be represented with the given electron configuration [.1s²2s²2p⁶3s²3p⁶4s²3d¹⁰4p².] is Germanium

Therefore, germanium has the electron configuration of [..1s²2s²2p⁶3s²3p⁶4s²3d¹⁰4p².

Learn more at: https://brainly.com/question/16762037?referrer=searchResults

Eutrophication causes excess algae growth because of fertilizer and sewage runoff because of the amounts of nitrogen and phosphorus it contains

Answer:

B

Explanation:

Eutrophication is a major problem for the ecosystems surrounding farmlands. This is as a result of farmers irresponsibly using fertilisers, and end up adding too much to their soil.

The way they see it, is that the more fertiliser they give the plants, the better the plants will grow, unfortunately plants can only take up so much nutrients, and what ends up happening is when the rain comes, a lot of the nutrients in the soil get washed away, and they usually end up in steams or lakes.

Now fertilisers are not specific to certain plants, so algae, which grows in lakes and streams, now have access to an almost endless supply of nutrients. So, what happens is the algae take up nutrients, and grow so much, that it ends up absorbing all the oxygen dissolved in the water. This  causes the fish to die, due to the lack of oxygen and the body of water becomes uninhabitable.

ANSWER:

We don't get an eclipse all period because the Moon's revolution is turned at  approximately 5∘ to the ecliptic.

EXPLANATION:

If the Moon's revolution was in the equal level as the Earth's we would encounter two  eclipses all period. A solar eclipse would appear every new moon also a lunar eclipse  would appear every full moon. As the Moon's orbit is turned at 5∘ to the ecliptic, an  eclipse can simply happen when the Moon is near one of its links which are the points  where the Earth and Moon circles intersect. The line joining the links also has to be  facing towards the Sun.

The produced moles of O₂ is "0.300 mol".

According to the question,

Moles of KO₂:

The equation is:

→ [tex]4 KO_2 + 2 CO_2 \rightarrow 2 K_2CO_3+ 3 O_2[/tex]

Now,

→ The moles of O₂ will be:

= [tex]\frac{3}{4}\times moles \ of \ KO_2[/tex]

By substituting the values, we get

= [tex]\frac{3}{4}\times 0.400[/tex]

= [tex]0.300 \ mol[/tex]

Thus the above answer is right.

Learn more:

https://brainly.com/question/2859657

It is false because an endothermic reaction will also start when energy is received from the environment when there is no solution involved

The process of intentionally interfering with the breeding process to encourage certain traits over others is called artificial selection or selective breeding.

In selective breeding, the breeding of plants and animals are done intentionally to produce desirable traits. Organisms with the desired traits, such as size or taste, are artificially mated or cross-pollinated with organisms with similar desired traits. The deliberate exploitation of selective breeding to produce desired results has become very common in agriculture and experimental biology. In this way, the scientists control and introduce the desirable traits in plants and animals.

Answer:

I thin the artificial selection is the answer it also fits the spaces

Explanation:

ok so I went in did the crossword answers are

1. biotechnology

2. DNA

3. transgenic animals

4. Genetic Engineering

5. plant

6.  transgenic crop

7. Artificial Selection

8. food

9. clones

10. reproduction

Final answer:

Correct option is: 4 N, left. The net force on the person standing on ice who throws a snowball to the right with a force of 4 N is 4 N to the left, in accordance with Newton's third law of motion.

Explanation:

The question involves understanding Newton's third law of motion, which states that for every action, there is an equal and opposite reaction. In this scenario, a person standing on ice throws a snowball to the right with a force of 4 N. According to Newton's third law, the snowball exerts an equal force of 4 N to the left on the person. Therefore, the net force on the person is 4 N to the left, as the forces exerted by the person on the snowball and by the snowball on the person are action-reaction pairs and do not cancel each other out. Instead, they act on different objects.

They would be arranged in a trigonal planar orientation.

If there were only three electron groups around an atom they tend to repel each other and gain a trigonal planar orientation. A molecule with three electron groups orients the three groups as far apart as possible. They adopt the positions of an equilateral triangle 120° apart and in a plane. The shape of such molecules is trigonal planar. An example is BF3:

Answer:

trigonal planar orientation.

Explanation:

C3H8 is saturated compound.

A saturated compounds are organic compounds having single covalent bond between carbon atoms.

Answer: saturated

Explanation:

Saturated hydrocarbons are defined as the hydrocarbons in which a single bond is present between carbon and carbon atoms. The general formula for these hydrocarbons is [tex]C_nH_{2n+2}[/tex].

Unsaturated hydrocarbons are defined as the hydrocarbons which have double or triple covalent C-C bonds. They are known as alkenes and alkynes respectively. The general formula for these hydrocarbons is [tex]C_nH_{2n}[/tex] and [tex]C_nH_{2n-2}[/tex].

The given compound is [tex]C_3H_8[/tex] belongs to formula [tex]C_nH_{2n+2}[/tex]  where n=3 and thus a saturated hydrocarbon.

100 mL of water weighs 100 g.

If 100 mL of a liquid that weighs only 20g, it cannot be water because of the great difference in density, unless there is an enormous error in the weighing process.

Answer is: Kr (krypton).

Krypton is a chemical element with symbol Kr and atomic number 36.

Krypton has 36 electron and 36. It is noble gas (group 18).

Noble gases are in group 18: helium (He), neon (Ne), argon (Ar), krypton (Kr), xenon (Xe) and radon (Rn). They have very low chemical reactivity.

Platinum (Pt), vanadium (V) and lithium (Li) are metals.

Answer:

Krypton is non metal.

Explanation:

The difference between a metal and non metal is that metals are ready to give electrons to attain half filled or full filled electron stability.

Non metal are reluctant to give electrons.

Out of the given choices

a) Pt : platinum is a transition metal.

b) V : Vanadium is a transition metal.

c) Li: Lithium is an alkali metal

d) Kr : Krypton is a non metal. It is a noble gas with full filled stability.