If 1 meter = 3.28 feet, what is the height of the Washington Monument in meters?

Answers

Answer 1

Since you didn't provide how tall the Monument was, I took the liberty to find it and it is 555 feet tall. So to convert to meters we must divide 555 by 3.28 or multiply it by 0.3048 (this is the method I used).
555 x 0.3048 = 169.164 meters

Answer 2

The height of the Washington Monument can be found out by unit conversation.

Units conversion

Unit conversion is a way of converting some common units into another without changing their real value. for, example, 1 centimeter is equal to 10 mm,

though the real measurement is still the same the units and numerical values have been changed.

The height of the Washington Monument is 554.32 feet.

Given to us1 meter = 3.28 feet

To find

the height of the Washington Monument

Solution

We know that the height of the Washington Monument is 169 meters.

Therefore,

1 meter = 3.28 feet

169 meters = 3.28 x 169 feet

= 554.32 feet

Hence, the height of the Washington Monument is 554.32 feet.

Learn more about Units conversion:

https://brainly.com/question/4736731

Related Questions

One’s behavior cannot be affected by one’s subconscious

Answers

That statement is false

Our subconscious tend to give a strong influence to our behaviours even if we are not feeling it directly.

For example, let's say that there is a boy that hurt by cats and it's ingrained in his head that cats possess high level of danger to him. Even after that boy grow up, his subsconcious would most likely cause a certain level of paranoia that make him either scared of cats or simply annoyed by seeing them.

Answer:

False is the correct answer

Explanation:

Peace and Love

Lena would like to be able to know her exact location on a map as she travels across the country. Which technology would best help Lena?

Answers

D) GPS, because it uses satellites that provide position and velocity data

A college student holds a pail full of water by the handle and whirls it around in a vertical circle at a constant speed. the radius of this circle is 0.95 m. what is the minimum speed that the pail must have at the top of its circular motion if the water is not to spill out of the upside-down pail

Answers

Here we have a circular motion. In that type of motion two new forces appear: centrifugal and centripetal. Centrifugal force tries to move object away frome the center of rotation. Centripetal force is the reason why object moves in a circle.

According to Newton's first law, in order for water not to spill out total force acting on water must be equal to zero. Forces acting on the water are gravitational and centrifugal.
[tex]0= F_{g} + F_{c} \\ - [tex]F_{g} = F_{c} \\ m*g= \frac{m* v^{2} }{r} \\ g= \frac{ v^{2} }{r} \\ v^{2} =g*r \\ v= \sqrt{g*r} \\ v= \sqrt{9.81*0.95} \\ v= \sqrt{9.3195} \\ v=3.1 m/s[/tex] [/tex]

Forces have opposite signs as they act in opposite directions. But their value is the same so we can ignore signs:

An electron is released from rest and travels over a potential difference of 2500 v. what is its final velocity?

Answers

The electron travels through a potential difference of [tex]\Delta V =2500 V[/tex]. This means that the loss of electrostatic potential energy of the electron is
[tex]\Delta U = q \Delta V= (-1.6 \cdot 10^{-19}C)(2500 V)=-4 \cdot 10^{-16}J[/tex]
where q is the electron charge.

For the law of conservation of energy, the electron (starting from rest and accelerated by the potential difference) acquired a kinetic energy equal to the negative of this loss of potential energy:
[tex]\Delta K=-\Delta U[/tex]
where [tex]\Delta K =K_f - K_i = K_f[/tex] because the electron is initially at rest and so its kinetic energy is zero. Since
[tex]K_f= \frac{1}{2}mv^2 [/tex]
where m is the electron mass, we can find the final velocity v of the electron:
[tex]v= \sqrt{ \frac{2K_f}{m} }= \sqrt{ \frac{2\cdot 4 \cdot 10^{-16} J}{9.1 \cdot 10^{-31} kg} }=3.0 \cdot 10^7 m/s [/tex]

The work input = _____. Fi × di Fi ÷ di Fo × do Fo ÷ do

Answers

I believe the work input= Fi × di. Work input is work done on a machine equal to the effort force times the distance through which the force is applied. On the other hand the work output is the work that is done by a machine equals resistance force times the distance through which the force is applied.

If an object 70 millimeters high is placed 40 millimeters from a converging lens and the image is formed 120 millimeters in front of the lens on the same side as the object, what’s the height of the image?

Answers

The basic proportion we have to use is:
[tex]d_o:d_i = h_o:h_i[/tex]
where [tex]d_o[/tex] is the distance of the object from the lens (40 mm), [tex]d_i[/tex] the distance of the image from the lens (120 mm), [tex]h_o[/tex] the height of the object (70 mm) and [tex]h_i[/tex] the height of the image (that we have to find). Solving for [tex]h_i[/tex] we find
[tex]h_i = \frac{d_i \cdot h_o}{d_o} = \frac{(120 mm)(70 mm)}{40 mm}=210 mm [/tex]
so, the height of the image is 210 mm.

A 0.025m radius toy top is spinning at a rate of 150rpm, what is the angular velocity? What is the linear velocity of the paint on the outside edge?

Answers

a) The angular velocity of the disk is 150 rpm (revolutions per minute). We can convert it into proper units, i.e. radiants per seconds, keeping in mind that:
[tex]1 rev = 2 \pi rad[/tex]
[tex]1 min = 60 s[/tex]
so the angular speed is
[tex]\omega = 150 \frac{rev}{min} = 150 \frac{2 \pi rad}{60 s} =15.7 rad /s[/tex]

b) The linear velocity is given by
[tex]v=\omega r[/tex]
since the radius is r=0.025 m, the linear velocity at the edge of the disk is
[tex]v= \omega r = (15.7 rad/s)(0.025 m)=0.39 m/s[/tex]

Why can an object still be seen when it is at absolute zero?

Answers

As the temperature goes down, the chaotic motion (velocity) of atoms start decreasing. If the temperature hits the absolute zero (which, in reality, is impossible to achieve), the atoms of the body would freeze, making the body still and stiff. One thing to note here is that the atoms do not get destroyed when the temperature reaches the absolute zero. That is the reason why the object can still be seen when it is at absolute zero.

an example of a Destructive force is the formation of mountains True or False?

Answers

Hey there!

An example of a Destructive force is the formation of mountains.

This statement is false, an example of a destructive force would not be the formation of mountains.

Hope this helps you.
Have a great day!

Which are examples of projectile motion? Check all that apply. a kicker punting a football a car traveling along a highway a free throw in basketball a ball rolling downhill a person throwing darts

Answers

A projectile is any object that is cast, fired, flung, heaved, hurled, pitched, tossed, or thrown.

A kicker punting a football, a free throw in basketball and a person throwing darts are some examples of projectile motion.

What is a projectile motion?

It is the movement of any item or material when it is launched from the planet's surface and takes any curving course while being affected by the pull of gravity of the planet.

This movement style The only force affecting our objects is gravity. Different projectile kinds are available.

A football is thrown upward, being kicked and imparting speed at an angle from the horizontal, or just being dropped and allowed to fall independently are all examples of the initial velocity.

Thus, a kicker punting a football, a free throw in basketball and a person throwing darts are some examples of projectile motion.

Learn more about projectile motion from here,

brainly.com/question/11049671

#SPJ2

APEX!!! PLEADE HELP!!!!

A 60 kg man is moving at 2 m/s. What is his kinetic energy?

A. 240j
B. 120j
C. 60j
D. 30j

Answers

Hello there!

We need to use the formula for kinetic energy.

K.E = 0.5 * mv²

M represents the mass which is 60kg

V is the velocity which represents the speed of the moving which is 2 m/s

K.E = 0.5 * 60 * 2²

K.E = 0.5 * 60 * 4

K.E = (30)(4)

K.E = 120

Remember that the answer should always be stated in Joules (J) which is the standard unit of measurement for Kinetic Energy.

Thus,

The correct answer is option B 120j

As always, I am here to help!

on Earth, how many grams of mass does it take to produce a force of 1 newton?

Answers

The weight of an object of mass m is equal to:
[tex]W=mg[/tex]
where [tex]g=9.81 m/s^2 [/tex] is the gravitational acceleration.

If we require a mass m to produce a force of 1 N, it means its weight is 1 N. Therefore, the required mass is:
[tex]m= \frac{W}{g}= \frac{1N}{9.81 m/s^2}=0.10 kg [/tex]

What is the angle between a light ray and its wavefront?

Answers

always 90 degrees . . .

If you shook the end of a rope up and down 5 times each second, what would be the period of the waves set up in the rope?

Answers

Shooking the rope up and down 5 times per seconds means that there are 5 cycles of the wave (or 5 crests) in one second, and so its frequency is [tex]f=5 Hz[/tex].

The period T is the reciprocal of the wave's frequency, therefore it is
[tex]T= \frac{1}{5 Hz}=0.20 s [/tex]

Final answer:

Shaking the rope at 5 times per second sets up waves with a frequency of 5 Hz. The period of these waves, which is the inverse of frequency, would be 0.2 seconds.

Explanation:

When you shake the end of a rope up and down 5 times each second, you are creating waves with a certain frequency. The frequency is the number of complete waves that pass a given point in one second, and it is measured in hertz (Hz). Since you're shaking the rope 5 times per second, the frequency of the waves set up in the rope is 5 Hz.

The period of a wave is the time it takes for one complete wave cycle to pass a point. It is the inverse of the frequency. To calculate the period (T), you would use the formula:

T = 1 / f, where 'f' is the frequency.

So in this case:

T = 1 / 5 Hz = 0.2 seconds.

Therefore, the period of the waves set up in the rope is 0.2 seconds.

explain the role that the ant and the acacia tree play in their symbiotic relationships

Answers

The presence of mutualistic ants greatly reduces bacterial abundance on surfaces of acacia leaves and has a visibly positive effect on plant health

a doghouse has a mass of 98 kg, and the coefficient of friction between it and the ground is 0.95. what is the maximum force of friction between the doghouse and the ground?

Answers

Answer:

Maximum force of friction, F = 912.38 N

Explanation:

It is given that,

Mass of doghouse, m = 98 kg

Coefficient of friction between doghouse and the ground, μ = 0.95

We have to find the maximum force of friction between the doghouse and the ground. It is given by :

F = μ N

N = normal force = mg

F = μmg

F = 0.95 × 98 kg × 9.8 m/s²

F = 912.38 N

Hence, this is the required solution.

a water-balloon launcher with mass 4 kg fires a 0.5 kg balloon with a velocity of 3 m/s to the east. what is the recoil velocity of the launcher?

Answers

I think we will use the law of conservation of linear momentum;
M1V1 = M2V2
M1 = 4 kg (mass of the water balloon launcher)
V1=?
M2= 0.5 kg ( mass of the balloon)
V2 = 3 m/s

Therefore; 4 V1 = 0.5 × 3
4V1= 1.5
V1= 1.5/4
= 0.375 m/s

2. A 200-kg boulder has 39,200 joules of gravitational potential energy. What height is it at?

3. A 1-kg model airplane has 12.5 joules of kinetic energy and 98 joules of gravitational potential energy. What is its speed? What is its height?

Answers

We have that the gravitational energy is given by: U=mgh where m is the mass of the object (in kg), g is the gravitational acceleration and h is the height of the object (in meters). Hence, h=U/(m*g) where g=9.8 m/s^2. Thus, h=20 m if we substitute.
Similarly, substituting in b, we have that the height of the model plane is 10 m. The kinetic energy is given by: K=[tex] \frac{1}{2} *m*u^2[/tex] where u is the speed of the object. Hence, solving for u we have u=[tex] \sqrt{2K/m} [/tex]. Substituting, we have that u=5m/s.

As per the first question we have to calculate the height at which the boulder is present.

we have been given the mass of the boulder [m] as 200 kg.

The gravitational potential energy is given as 39,000 Joule.

The gravitational potential energy at a height ' h' from the surface earth is given as P.E= mass×height×acceleration due to gravity

The value of g=9.8 m/s^2

Hence height [h][tex]=\frac{P.E}{mg}[/tex]

=[tex]\frac{39000}{200*9.8} metre[/tex]

=19.8979 metre

As per the second question we have to calculate the sped and height of the model airplane.

the mass of model airplane is 1 kg

The kinetic energy [K.E] of the airplane is 12.5 joule

we have K.E[tex]=\frac{1}{2} mass*speed^2[/tex]

K.E[tex]=\frac{1}{2}mv^2[/tex]

[tex]v^2=\frac{2K.E }{m}[/tex]

[tex]v^2=\frac{2*12.5}{1}[/tex]

[tex]v=\sqrt{25}[/tex]

v=5 m/s

Again we have to calculate the height [h]

The potential energy is given as 98 Joule.

we know that P.E= mgh

tex]h=\frac{P.E}{mg}[/tex]

=[tex]\frac{98}{1*9.8} metre[/tex]

=10 metre

Does a physicist studies cells and life cycles?

Answers

Hey there!

No, that would be a biologist. Biologists study biology, or life. They're focused on life cycles, cells, evolution, and so much more.

Physicists focus on physics. They learn about forces, motion, and the study of the universal forces like gravity, momentum, and speed. Just like mathematics, they study patterns and look for new discoveries to be found in the fields of science, physics, and even mathematics.

Hope this helps!

Final answer:

Physicists may delve into biological concepts through biophysics, but the study of cells and life cycles is principally a field within biology, focused on by cell biologists.

Explanation:

No, A physicist primarily studies the fundamental principles governing the universe, such as energy, force, and matter. While physics does impact biological systems by explaining behaviors of molecules in cells or assisting in the creation of medical technology, the study of cells and life cycles specifically falls within the realm of biology.

Cell biology is a branch of biology focusing on the study of cellular structures and functions and is fundamentally concerned with the life cycle of cells. Physicists may contribute to this field through biophysics or biomedical applications, such as using physics principles to describe properties of cell membranes or developing diagnostic tools like MRI machines. However, the everyday work of studying cells and their life cycles is typically performed by biologists rather than physicists.

Newton concluded that some force had to act on the moon because

Answers

Think in gravity, the moon is orbiting the Earth because of gravitational pull/force. Without this gravitational pull, the moon will just move in a straight line (Newton's first law).

Newton concluded that some force had to act on the moon because it is constantly accelerating towards Earth.

Without such a force, according to Newton's First Law, the Moon would continue in a straight path instead of orbiting the Earth. In 1666, he recognized that this centripetal force was necessary to maintain the Moon's circular path. He also theorized that the gravitational force must be proportional to the masses of the Earth and the Moon and that it follows an inverse-square relationship with distance.

Newton's insight was that the same force that causes an apple to fall to the ground also keeps the Moon in orbit around the Earth. This led him to deduce the Law of Universal Gravitation. According to Newton's Second Law, the moon's acceleration towards Earth indicated a centripetal force, which he later defined in his Principia using his laws of motion and the newly formulated concept of gravitational force.

Furthermore, Newton discovered that the gravitational force between any two bodies not only follows the Universal Law of Gravitation but also forms an action-reaction pair, satisfying his Third Law of Motion. This was a crucial realization for Newton to fully explain the motion of the planets and the gravitational pull between the Earth and the Moon.

Why does the plot show vertical jumps at the melting and boiling points?

Answers

I think this happens because during melting or boiling at constant temperature, the entropy dramatically increases because energy is removed from the system during the change. Entropy increases with increase in temperature, entropy increases steadily with increasing temperature up to the melting point of the solid, where the entropy increases further due to addition of freedom of molecules which increases the randomness of the substance. At boiling point of liquid, another abrupt increase in entropy occurs, this results from increased volume available to the atoms or molecules as they enter the gaseous state.

The current in an electron beam in a cathode ray tube is 7.0 X 10^-5 A. A beam of electrons is aimed at a screen. How much charge hits the screen in 5.0S?

A- 2.8X10^3 C

B-5.6X10^-2 C

C-3.5X10^-4 C

D-5.3X10^-6 C

Answers

The current I is defined as the quantity of charge Q that flows in the tube in the unit of time t:
[tex]I = \frac{Q}{t} [/tex]
In our problem, we have [tex]I=7\cdot 10^{-5} A[/tex] and the time is t=5.0 s. Therefore we can find the charge that hits the screen during this time:
[tex]Q=It =7\cdot 10^{-5} A \cdot 5.0 s=3.5X10^{-4} C[/tex]

Match the terms

Term Definition

Chromosphere A) Layer of the sun where energy is transferred by thermal conduction.

Photosphere B) Contains the sun's outer shell from which light energy is radiated.

Radiative zone C) Layer of the sun that is known for its red color and can only be seen during eclipses

Corona D) The plasma that surrounds the sun

Answers

Explanation :

(1) Chromosphere: It is a layer above the photosphere. The temperature in chromosphere increases from [tex]6000^0\ C[/tex] to [tex]20,000^0\ C[/tex]. This layer is known for its red color and can only be seen during eclipses.

(2) Photosphere: It is the outer layer of the star which contains sun's outer shell from which light energy is radiated.

(3) Radiative zone: it is a layer of sun where energy is transmitted towards via radiative diffusion or conduction.

(4) Corona: It is a plasma that surrounds the sun and the other stars.

Hence, this is the required definitions.

Answer:bdca

Explanation:

Which of the following refers to a combination of substances in which the components are evenly mixed?

A. Heterogeneous mixture
B. Ion
C. Compound
D. Homogeneous mixture

Answers

I believe it’s D. Homogenous mixture

It is rather A or D

A 150 kg hoop rolls along a horizontal floor so that the hoop's center of mass has a speed of 0.130 m/s. how much work must be done on the hoop to stop it?

Answers

The work needed is equal to the KE of the hoop which is = 150 * 0.130^2 / 2 ...(1)
Let the following be:r be the radiuscenter of mass in the moment of inertia is denoted by:
I = 150 r^2 kg m^2.
The angular velocity relative to the center of mass is:
w = 0.130 / r rad / s.
Rotational KE = Iw^2 / 2
= (150 * r^2) (0.130 / r)^2 / 2
= 150 * 0.130^2 / 2 J ...(2)
Adding (1) and (2):
Total KE = 130 * 0.130^2
= 2.2 J.

A sound wave is moving with a frequency of 700 Hz. What is the period of this sound wave?

700 s
1/700 s
1/700 Hz
70 s

Answers

The period T of a wave is the reciprocal of the frequency f:
[tex]T= \frac{1}{f} [/tex]
The frequency of the wave in the problem is [tex]f=700 Hz[/tex], so the period is (keeping in mind that [tex]1 Hz=1s^{-1}[/tex])
[tex]T= \frac{1}{700 Hz}= \frac{1}{700 s^{-1} }= \frac{1}{700} s [/tex]

Answer:

1/700s

Explanation:

took test

What does the index of refraction directly measure? the angle between the incident ray and the normal line the angle between the refracted ray and the normal line the bending of light in a medium the reflection of light in a medium

Answers

The bending of light in a medium

Answer:

The answer is The bending of light in a medium.

Explanation:

The refractive index is the dimensionless number that expresses the relationship between the speed of light in the air and the speed of light in the densest medium, that is, the refractive index directly measures the ratio of the velocity of the light in a vacuum and the speed of light in a medium. This phenomenon occurs because the light rays follow a rectilinear path, but when they pass from one means of transport to another, it is refracted, because the light has a velocity distance according to the density of the material it passes through. The refractive index has variables that affect the measurement, which are temperature, wavelength and pressure.

Give an example to explain that motion is relative in nature

Answers

Consider a long train moving at speed v. Now consider a passenger throwing a ball inside this train, towards the back of the train, with same velocity v (but in the opposite direction of the train movement).

- A passenger inside the train will see the ball moving with speed v
- For an observer outside the train, however, the ball will appear as still. In fact, for him the ball will have a speed v (given by the movement of the train) -v (velocity of the ball but moving in the opposite direction), so the net velocity will be v+(-v)=0.

A flea jumps straight up to a maximum height of 0.540 m . what is its initial velocity v0 as it leaves the ground?

Answers

For an uniformly accelerated motion, we can write
[tex]2ah=v_f^2-v_0^2[/tex]
where [tex]a=g=-9.81 m/s^2[/tex] is the acceleration of this motion, which in this problem is the gravitational acceleration, with a negative sign because it points downward, against the direction of the motion; h=0.540 m is the distance covered by the flea, and [tex]v_0[/tex] is the initial velocity.

At the maximum height, the velocity is zero, so [tex]v_f =0[/tex]. Therefore we can solve to find [tex]v_0[/tex]:
[tex]v_0 = \sqrt{2ah}= \sqrt{2(9.81 m/s^2)(0.540 m)} =3.25 m/s[/tex]

Which of the following processes requires a physical medium (a solid, liquid, or gas) to transfer thermal energy from one object to another?
I. conduction
II. convection
III. radiation
A. I and III only
B.I and II only
C. III only
D. II only
E. none of these require a physical medium to transfer thermal energy.

Answers

Choice-B ... I and II only.

Conduction and convection require a physical medium (a solid, liquid, or

gas) to transfer thermal energy from one object to another.

Conduction is the process of heat transfer that takes place in solids.

Thermal energy is usually transferred from hotter surfaces to colder ones in

order to ensure equilibrium is reached

Convection is also similar to conduction but involves heat transfer in fluids

such as water. Radiation on the other hand doesn't require a physical

medium as it exists through a vacuum. This makes option B the most

appropriate choice.

Read more about heat transfer on https://brainly.com/question/16055406

Other Questions

Which term is defined as the change in the direction of light when it goes from one medium into a different medium?Question options:ReflectionRefractionDiffractionAbsorptionLight traveling through air strikes the surface of the four different materials below. Which material reflects light but does not refract it? Question options:DiamondPrismMetal spoonWater dropletsReflection happens when a wave __________ .Question options:compresses air particles as it travelscompresses air particles as it travelsstrikes an object and bounces off of itcauses ripples in a body of waterWhy does the pencil appear broken in the cup of water?Question options:Electromagnetic/Light waves cannot travel through solids.Electromagnetic/Light waves travel at different speeds through different media.Electromagnetic/Light waves compress more when they travel through denser media.Electromagnetic/Light waves get closer together when they go through dense media like glass.What is occurring when a light wave diffracts?Question options:The light wave is bending around an obstacle or through a barrier. The light wave is bending when it goes from gas to liquid.The light wave is bouncing off of a smooth surface.The light was is absorbing.On a beautiful night in Washington D.C., you see a mirror image of the Washington Monument and surrounding scenery. What causes this mirror image?Question options:White lightRefracted lightAbsorbed lightReflected lightThe BEST example of diffraction is the image ofQuestion options:A ring around the Sun caused by particles in the air.Looking down in the pool and seeing your foot appearing to be broken from your leg.A fingerprint that appears to be enlarged under a magnifying glass.Seeing your face as it appears in a mirror.Which statement is true about transmission and absorption?Question options:Transmission is when light passes through an object and absorption is when some or all of the light is taken in or absorbed by the object.Transmission is when light cannot go through an object and absorption is when light bounces off an object.Transmission is when light bounces off an object and absorption is when light passes through an object.Transmission and absorption are when the light bounces off of an object. If 2 more violinists join the orchestra and 1/2 the orchestra are violinists already what fraction of all musicians would play a stringed instrument PLEASE PLEASE HELP ME Read the following sentence and select the correct rule for using the preposition por. l siempre viaja por tren. how can you add a figure to a composite figure without increasing its perimeter? Draw a diagram to support your answer The immigrant aide society encouraged black freedmen to return to africa. a. True b. False A completely ionized beryllium atom (net charge = +4e) is accelerated through a potential difference of 6.0 v. what is the increase in kinetic energy of the atom? what is 5/10 + 25/100 Ben brought two pizzas to a party. He says that sinceramente 1/4 of each pizza is left,the sale a Mountain of each pizza is left. What is his error? There are 20 trees in a yard that each produced 1 gallon of syrup. If the syrup needs to be put into 3 gallon containers, how many containers are necessary to hold all of the syrup? Before the battle, Sancho Panza warns Don Quixote that a. he will not help the Don, because he is a coward b. what Don Quixote thinks are giants are not really giants c. Dulcinea does not really love himin fact she scorns him d. the horse Rocinante is not likely to remain standing through such an ordeal An organ system consists of a group of organs that performs specific functions necessary for the survival of an organism. Humans have eleven different organ systems: integumentary, skeletal, muscular, nervous, endocrine, circulatory, lymphatic, respiratory, digestive, urinary, and reproductive.Discuss the function of neurons, the brain and the spinal cord within the human nervous system while explaining the interrelationship of each organ. A retail store marks up its OTC (over-the-counter) merchandise 50% based on acquisition cost. What's the retail price of an item that costs $2? it rained 3/8 of a inch each day for 3 days straight how much rain fell altogether A human gene carries a certain disease from the mother to the child with a probability rate of 70%. suppose a female carrier of the gene has three children. also assume that the infections of the three children are independent of one another. find the probability that at least one child gets the disease from their mother. Anyone please help me please solving these maths problems not sure.Thanks. what is a gravitational field and how its strength be measured All known forms of cancer are caused by the abnormal behavior of cells. TrueFalse Blind infants tend to show the same facial expressions as do sighted infants, but as blind infants grow older, their expressions become less animated. this indicates that facial expressions Please help me out :) If 8 ties cost $128, how much do 15 ties cost?