if 1.20 moles of copper react with mercuric nitrate how many moles of mercury form

Answer: The molarity of solution is 0.67 M

Explanation:

To calculate the molarity of solution, we use the equation:

[tex]\text{Molarity of the solution}=\frac{\text{Mass of solute}\times 1000}{\text{Molar mass of solute}\times \text{Volume of solution (in mL)}}[/tex]

We are given:

Mass of solute (KCl) = 5.0 g

Molar mass of potassium chloride = 74.55 g/mol

Volume of solution = 100 mL

Putting values in above equation, we get:

[tex]\text{Molarity of solution}=\frac{5g\times 1000}{74.55g/mol\times 100mL}\\\\\text{Molarity of solution}=0.67M[/tex]

Hence, the molarity of solution is 0.67 M

Answer is Carbon dioxide.

The given gases are trace gases. Our atmosphere has 0.1% of trace gases. Among those trace gases, carbon dioxide level is highest as 93.49%. Methane has 0.44% and amount of nitrous oxide is 0.07%. But when considering the whole atmosphere nitrogen gas is the most abundant gas as 78% and next is oxygen as 21%.

Carbon dioxide is the most abundant of the three gases mentioned in the Earth's atmosphere. Nitrogen and oxygen are the most abundant gases overall. Methane is more effective on a per-molecule basis at heating the atmosphere than carbon dioxide.

The question involves identifying which of the three gases carbon dioxide ([tex]CO_2[/tex]), nitrous oxide ([tex]N_2O[/tex]), or methane ([tex]CH_4[/tex]) is most abundant in the Earth's atmosphere. When considering these gases specifically, carbon dioxide is the most abundant. However, it is important to note that the major components of the atmosphere are nitrogen (78.1%) and oxygen (20.9%), with gases such as argon, carbon dioxide, neon, helium, methane, and nitrous oxide present in much smaller amounts.

Regarding the effectiveness at heating the atmosphere, methane is more effective on a per-molecule basis than carbon dioxide due to its ability to absorb more heat. However, carbon dioxide is more abundant and also contributes significantly to the atmospheric warming, playing a crucial role in the Earth's greenhouse effect beside water vapor, the most abundant greenhouse gas.

Answer : Option C) 5.1

If we consider any weak acid and strong base titration. We usually observe that the pH initially rises quite fast then remains constant during the buffer region before rising rapidly to the end point.

So, if 5 mL of NaOH is considered to be the one third of the way to the endpoint, then after the initial rise which will be more than 3.4 and reaching to the buffer region before rising to the endpoint.

Now, if endpoint has pH of 8.6 a buffer region around 5 is a good but the acid could be acetic acid which has similar pH endpoints with the pKa of 4.74 - so buffer region around 5 will be the good condition.

And hence pH of 5.1 is the most probably the right answer.

5.1 would be the clostest answer

Answer : The volume of solution is, 3.33 liter

Explanation : Given,

Mass of KCl = 55.8 g

Molar mass of KCl = 74.5 g/mole

Molarity = 0.225 M

Molarity : It is defined as the number of moles of solute present in one liter of solution.

In this question, the solute is KCl.

Formula used :

[tex]Molarity=\frac{w_b}{M_b\times V}[/tex]

where,

[tex]w_b[/tex] = mass of solute KCl

[tex]M_b[/tex] = molar mass of solute KCl

V = volume of solution = ?

Now put all the given values in the above formula, we get the molarity of the solution.

[tex]0.225mole/L=\frac{55.8g}{74.5g/mole\times V}[/tex]

[tex]V=3.33L[/tex]

Therefore, the volume of solution is, 3.33 liter

Answer: d. water vapor and sulfur dioxide?

As per result of studies done on volcanic eruptions, Water vapor (H2O), carbon dioxide (CO2), and sulfur dioxide (SO2) are the most common volcanic gases abundantly emitted in volcanic outgassing. Other gases like carbon monoxide, methane and hydrogen are released in lesser amounts. 

Answer:

water vapor and sulfur dioxide.

Answer : The correct answer is Ba²⁺ and Cl⁻ ions .

This can be explained using Solubility concept .

Solubility is defined as property referring to ability of a substance , SOLUTE , to dissolves in a SOLVENT . It is measured at maximum amount of solute that dissolves in solvent as equilibrium .

Solubility of any compound can be checked using Solubility Rule ( Image ).

BaCl₂ is salt of Chloride . Since the solubility rules says that salts if chlorides are soluble , Hence BaCl₂ is also soluble .

SO when BaCl₂ forms in aqueous solution , it again dissociates to forms ions since it is soluble in aqueous solution . It produced one Ba²⁺ ion and two ions of Cl⁻ .

The BaCl₂ dissociates as follows :

[tex] BaCl_2 (aq) \rightarrow Ba^2^+ (aq) + 2 Cl^- (aq) [/tex]

Hence even BaCl₂ forms but it remain as dissociated ionic form as Ba²⁺ and Cl⁻ ions.

When CH₄ burns with the presence of O₂, CO₂ and H₂O are formed as the products. The balanced equation is;

CH₄ + 2O₂ → CO₂ + 2H₂O

When the reaction happens, 4 C-H bonds of CH₄ and O=O bond of O₂ are broken down to form 2 C=O bonds in CO₂ and 2 O-H bonds in H₂O.

The broken and formed bonds are marked in the image.

Fluorine atoms have seven valence electrons according to their electron configuration, which is reflected in their belonging to Group 7A of the periodic table and is also depicted in their Lewis dot structure.

According to the given electron structure of fluorine (F=1s22s22p5), fluorine atoms have seven valence electrons. The electron configuration indicates that there are two electrons in the first energy level (1s2) and seven electrons in the second energy level (2s22p5). Since the second energy level is the outermost shell, these seven electrons are considered the valence electrons.

Fluorine belongs to Group 7A in the periodic table, which means it is expected to have seven valence electrons. This is confirmed by the electron configuration. These valence electrons are represented in a Lewis dot structure by placing seven dots around the symbol for fluorine (F).

To find the volume of hydrogen gas produced at STP from the reaction of 78.33g of aluminum with excess water, calculate the moles of aluminum, convert that to moles of hydrogen gas using stoichiometry, and then use the molar volume at STP to find 97.44 liters of hydrogen gas.

To determine the volume of hydrogen produced at STP (Standard Temperature and Pressure) by the reaction of aluminum with excess water, we first need to write the balanced chemical equation for the reaction.

For aluminum reacting with water yielding aluminum hydroxide and hydrogen gas, the balanced equation is:

From this equation, we can see that 2 moles of aluminum produce 3 moles of hydrogen gas. To find the moles of aluminum in 78.33g, we use the molar mass of aluminum (approximately 26.98 g/mol).

Thus, the reaction of 78.33g of aluminum with excess water will produce 97.44 liters of hydrogen gas at STP.

The sequence of bases on one strand of DNA can be predicted from the other due to specific base pairing rules, with adenine pairing with thymine, and cytosine with guanine, a principle foundational to DNA replication and repair mechanisms. Option c

The ability to predict the base sequence of one DNA strand when the sequence of the complementary strand is known is due to base pairing rules, which are critical for DNA replication and maintenance. In this specific pairing, adenine (A) always binds to thymine (T), and cytosine (C) always binds to guanine (G).

The bases on one strand form hydrogen bonds with the bases on the opposite strand, leading to a complementary base sequence: whenever there is an 'A' on one strand, there is a 'T' opposite it, and for every 'C' there is a 'G'. This strict pairing, which was elucidated in the Watson-Crick model of DNA, essentially allows one to recreate one strand's sequence from the other.

An example of complementary base pairing would be a DNA strand with the sequence 5'-AATTGGCC-3' having a complementary strand with the sequence 3'-TTAACCGG-5'..

Due to the nature of these interactions, the process of DNA replication involves separating the two strands and using each as a template to create a new complementary strand. This results in two DNA molecules where one strand is original and the other newly synthesized. The redundancy in information encoded by the complementary strands is a crucial aspect of genetic fidelity and repair mechanisms in the cell, ensuring the DNA's integrity over generations.

Chemical reactions can result in new compounds, while nuclear reactions can result in new elements.

Answer:

Heat is transferred through contact between molecules.

Explanation:

a-p-e-x

The most reactive nonmetals are found in the column second from the right side of the periodic table, also known as Group 17 or the halogens. They are highly reactive because they need to gain just one electron to complete their outer electron shell. Fluorine is the most reactive nonmetal.

The most reactive nonmetals are located in the upper right section of the periodic table, in the column that is second from the right side. This column is known as Group 17, or the halogens. Halogens are highly reactive due to their propensity to gain an electron to fill their outer electron shells, and they exhibit rich variety of chemical behaviors.

Elements belonging to the same column or group, such as the halogens, share many chemical characteristics because they have the same number of valence electrons.

https://brainly.com/question/14183621

#SPJ12

Option B: NaCl (aq)

There are two important factors that make a compound a good conductor of electricity that is its state and number of charge particles.

Here, the substances in solid state do not conduct electricity due to unavailability of free ions as movement of free ions in a substance is responsible for electricity conduction.

Therefore, NaCl(s) and [tex]C_{6}H_{12}O_{6}(s)[/tex] do not conduct electricity.

Now, out of NaCl(aq) and and [tex]C_{6}H_{12}O_{6}(aq)[/tex], NaCl(aq) is a good conductor of electricity because in aqueous solution, NaCl completely dissociates into [tex]Na^{+}[/tex] and [tex]Cl^{-}[/tex] ions. Due to the presence of these ions it is good conductor of electricity.

NaCl (aq) is the best conductor of electricity. Therefore, option B is correct.

When NaCl is dissolved in water, it dissociates into its constituent ions, Na+ and Cl-. These ions are electrically charged particles that can move freely in the solution. The presence of these mobile ions allows the solution to conduct electricity.

In an aqueous solution of NaCl, the positively charged sodium ions (Na+) and negatively charged chloride ions (Cl-) are attracted to the oppositely charged electrodes of an electrical circuit. When a voltage is applied across the solution, the ions are driven toward their respective electrodes. This movement of charged particles constitutes an electric current. Thus, option B is correct.

Learn more about NaCl, here:

https://brainly.com/question/14126616

#SPJ6

Final answer:

To produce 432 grams of silver from the reaction of copper with silver nitrate, 127.23 grams of copper are required according to stoichiometry and the mole ratio from the balanced equation.

Explanation:

To determine the number of grams of copper required to produce 432 grams of silver in the reaction with silver nitrate, we must first understand the balanced chemical equation:

Cu(s) + 2 AgNO3(aq) → Cu(NO3)2(aq) + 2 Ag(s)

From this balanced equation, we can see that one mole of copper reacts with two moles of silver nitrate to produce one mole of copper(II) nitrate and two moles of silver. To solve the problem, we need three molar masses: that of copper (63.55 g/mol), silver nitrate (169.88 g/mol), and silver (107.87 g/mol). Using stoichiometry, we can set up the calculation as follows:

432 g Ag x (1 mol Ag / 107.87 g Ag) x (1 mol Cu / 2 mol Ag) x (63.55 g Cu / 1 mol Cu) = grams of Cu required

By calculating, we get:

432 g Ag / 107.87 g/mol Ag = 4.004 mol Ag

4.004 mol Ag x 1 mol Cu / 2 mol Ag = 2.002 mol Cu

2.002 mol Cu x 63.55 g/mol Cu = 127.23 g Cu

Therefore, 127.23 grams of copper are required to produce 432 grams of silver when copper reacts with silver nitrate according to the balanced equation.

2.86 °C = (1) (1.86 °C kg mol-1) (x / 0.750 kg)

2.86 °C = (2.48 °C mol-1) (x)

x = 1.1532 mol

33.7 g / 1.1532 mol = 29.2 g/mol

Final answer:

A) Tinfoil, which is made of aluminum, does not decompose as it is not an organic material. Plastic water bottles and milk cartons can take significant time to decompose due to their plastic components, while lumber, being organic, does decompose naturally.

Explanation:

The object that does not decompose among the ones listed is A) Tinfoil. Decomposition is a process that typically involves the breakdown of organic material by microorganisms. Tinfoil, which is made of aluminum, is not an organic material and thus does not decompose in the same way organic substances, like lumber, do. A plastic water bottle can take a very long time to decompose, often hundreds of years, but it can eventually break down, although not as readily as organic materials. A milk carton typically contains both paper, which is organic and degradable, and a plastic lining, which can take a considerable amount of time to decompose. As such, milk cartons often have components that can degrade and others that are very resistant to degradation. On the other hand, lumber, which is wood, will decompose over time as it is an organic material.