Answer:
it will take 2 minutes for 200 nurses to measure the blood pressure of 200 patients .
Step-by-step explanation:
We know that the work-time and number of labor and efficiency formula is given by:
[tex]Efficiency=\dfrac{Number\ of\ labor\times Time}{Work\ done}[/tex]formula is given by:
Here Number of labor=Number of nurses.
Work=Number of patients whose blood pressure were noted.
As the efficiency will be same this means that:
[tex]\dfrac{2\times 2}{2}=\dfrac{200\times x}{200}[/tex]
where x denotes the number of time taken by 200 nurses.
Hence,
[tex]x=2[/tex]
Hence, the answer is:
2 minutes.
Conrad and jill have a taxable income of 63,670. they discovered that they are able to receive $1,500 tax credit for purchasing an energy efficient furnace. How will this tax credit affect their taxes?
A) the tax credit will increase their taxable income by $1,500
B) the tax credit will reduce their taxable income by $1,500
C) the tax credit is added to the tax owed, not the taxable income
D) the tax credit is subtracted from the tax owed, not taxable income
Which type of study contains a treatment?
Sample.
Experiment.
Survey.
Observational study.
The scale factor of the dilation of figure ABCD is?
2 is the scale factor of the dilation of figure ABCD
What are coordinates?A pair of numbers called coordinates are used to locate a point or a form in a two-dimensional plane. The x-coordinate and the y-coordinate are two numbers that define a point's location on a 2D plane.
The scale factor of a dilation is a number that represents how much a figure's size alters following a dilation. It is the ratio of similar sides' lengths in the original and dilated figures.
A figure is stretched or extended if the scale factor is larger than 1, and lowered or shrunk if it is less than 1. If the scale factor is 1, the dilation has no effect on the figure; if it is less than 1, the figure is reflected beyond the line of dilation.
The scale factor is represented by the symbol k, and its value may be determined using the formula below:
k = Length of the corresponding side in the dilated figure / Length of the corresponding side in the original figure.
On the given figure,
Before dilation the measurement of the side AD = 1 unit.
After dilation the measurement of the same side = 2 units
Thus, from the formula
k = 2/1
k=2
Therefore, The scale factor of the dilation of Figure ABCD is 2.
Learn more about coordinates here:
https://brainly.com/question/20282507
#SPJ3
Which table represents a linear function? (Will give brainliest)
Answer:
x y
1 0.5
2 1
3 1.5
4 2
Table (1) represents a linear functions.
Step-by-step explanation:
Given : Tables with x and y values.
We have to choose the table that represents a linear function.
Since, A linear function is of the form y = mx + c , where m is slope and c is y- intercept
Consider the table (1),
x y
1 0.5
2 1
3 1.5
4 2
Consider two points , (1,0.5) and (2,1)
0.5 = m(1) + c
and 1 = m(2) + c
Subtract both , we have,
m = 0.5
and Put m = 0.5 back, we have,
c = 0
Thus, y = 0.5x
Thus, Table (1) represents a linear functions.
Given the equation f(x) = (x + 3)2 – 8, fill in the blanks:
Axis of symmetry: x =
Vertex:( , )
Number of real solutions:
Final answer:
This detailed answer explains the axis of symmetry, vertex, and number of real solutions for the given quadratic equation.
Explanation:
Given the equation f(x) = (x + 3)² – 8
Axis of symmetry: x = -3
Vertex: (-3, -8)
Number of real solutions: 1
What's a parabola? What's a hyperbola?
Good Treads and Speed Tracks manufacture tires. Good Treads claims that their tires last longer than Speed Tracks tires. A car company decided to test Good Tread's claim. They purchased 20 sets of Good Tread's tires and 20 sets of Speed Track's tires. They tested the lifetime of each tire by simulating 1,000 miles of driving conditions for each set of tires each day. At the end of each day, they measured the tread on each of the tires. Once the tire tread drops below minimum safe tread depth, the tire is considered to have passed its lifetime.
After observing the lifetime of each tire, the car company reported that the average lifetime of a Good Treads tire is 55,000 miles and the average lifetime of a Speed Tracks tire is 65,000 miles.
Given the car company's report, what conclusion can be made regarding the average lifetime of Good Treads and Speed Tracks tires?
There is not enough information to make any conclusions from the car company's report.
Good Treads' claim is false; therefore, it can be concluded that Speed Tracks tires last longer than Good Treads tires.
Good Treads' claim is false; therefore, it can be concluded that Good Treads tires last longer than Speed Tracks tires.
Good Treads' claim is true; therefore, it can be concluded that Good Treads tires last longer than Speed Tracks tires.
Good Treads' claim is false; therefore, it can be concluded that Speed Tracks tires last longer than Good Treads tires.
D
The car company's report provides evidence that Speed Tracks tires have a longer average lifetime compared to Good Treads tires. Therefore, we can conclude that Good Treads' claim that their tires last longer is false.
Based on the car company's report, we can conclude that Good Treads' claim that their tires last longer than Speed Tracks' tires is false. The average lifetime of a Good Treads tire is reported to be 55,000 miles, while the average lifetime of a Speed Tracks tire is reported to be 65,000 miles.
To reach this conclusion, we compare the average lifetimes of the two tire brands. Since the car company tested 20 sets of each brand's tires and measured the tread on each tire after simulating 1,000 miles of driving conditions, we can assume that these results are representative.
By comparing the average lifetimes, we see that the average lifetime of Speed Tracks tires is greater than the average lifetime of Good Treads tires. Therefore, we can conclude that Speed Tracks tires last longer than Good Treads tires, contradicting Good Treads' claim.
In conclusion, the car company's report provides evidence that Speed Tracks tires have a longer average lifetime compared to Good Treads tires. Therefore, we can conclude that Good Treads' claim that their tires last longer is false.
To know more about average lifetime:
https://brainly.com/question/13264916
#SPJ2
David’s starting pay for his summer job is $10.00 per hour. Halfway through the summer he receives a 50 cent per hour raise. David is hired the next summer and receives a 10% raise. Halfway through the second summer he receives a 50 cent per hour raise. David is hired for a third summer and is given a 5% raise. How much money does David earn per hour during the third summer? Show or explain your work.
cylinder A has a volume of 360 cm3. Cylinder B has a base and height identical to that of cylinder B, but leans to the right in such a way that its slant is greater than 4 cm. what is the volume of cylinder B
A basket is filled with 8 white eggs and 10 brown eggs. Half of the white eggs are cracked. An egg is randomly selected from the basket. What is the probability that it is a cracked, white egg?Write the answer in a fraction in simplest form
a $1600 principal earns 7% annual interest, compounded semiannually. What is the balance after 33 years?
One state leads the country in tart cherry production, producing 80 out of every 100 tart cherries each year. a. What percent of tart cherries are produced in this state?
Choose any numbers for he first column that will correctly complete the table.
Suppose that $2000 is invested at a rate of 2.1% compounded annually. Assuming that no withdrawals are made find the total amount after 5 years. Do not round any intermediate computations, and round your answer to nearest cent.
what is the diameter of a circle with a circumference of 30 pi inches
Danny bought 5 candies. Lucy bought 2 fewer than danny. Jimmy bought 4 more than lucy. how many candies did jimmy buy
A cat and a dog have a race. The cat’s strides are 30% shorter than the dog’s but it makes 30% more strides than the dog. Which of them will win the race?
Q #11 Solve the equation
Find the measure of the central angle that you would draw to represent 67% in a circle graft round your answer to the nearest degree
To finance her community college education, Sarah takes out a loan for $3700. After a year Sarah decides to pay off the interest, which is 5% of $3700. How much will she pay?
(a) [5 points] using only the definition, find the laplace transform y (s) of y(t) = e a t where a is a constant. for what values of s does the laplace transform y (s) exist? (b) [10 points] solve, using laplace transforms, the initial value problem: y 00 − 4y 0 + 4y = 3, y(0) = 0, y0 (0) = 1.
PLEASE HELP!!!!!! WHICH OF THE FOLLOWING IS A CORRECT EQUATION FOR THE LINE PASSING THROUGH THE POINT (-2 1) AND HAVING SLOPE M = 1/2
Nancy wove a pot holder with a area of 80 square inches. The lengths and widths of the sides are whole numbers. Which dimensions make the most sense for a potholder? Explain
Final answer:
The dimensions of 8 inches by 10 inches make the most sense for a pot holder with an area of 80 square inches, as they are practical in size. This is similar to the concept of a square whose area scales by the square of the side length when dimensions are increased by a scale factor.
Explanation:
The student asked which dimensions make the most sense for a potholder with an area of 80 square inches where the lengths and widths are whole numbers. It's crucial to consider practical sizes that would be convenient for handling hot items without being too large or too small.
Common dimensions for a pot holder could be 8 inches by 10 inches since 8 x 10 equals 80 square inches, and these measurements are suitable for a pot holder. These measurements make sense as they provide enough space to protect hands from heat but are not excessively large, making them impractical. They are comparable to the measurements of a placemat, which is typically used in dining settings and is also manageable in size.
Comparing this to the information about squares and areas, if Marta has a square with side length 4 inches, its area would be 16 square inches. A similar square with side lengths that are twice as long (8 inches) would have an area of 64 square inches because the area is proportional to the square of the side length. Consequently, the area of the larger square is four times that of the smaller square (since 2 squared is 4).
This example of scaling dimensions and areas can assist in understanding how dimensions that are whole numbers relate to the area and the practical use of an object. The mentioned scale factor is integral in determining how the area increases with increased side lengths.
3x^2-2x+7 divided by x+1 what is the quotient?
Use the distributive property to factor the expression below.
54x2y - 12x2y2
An equilateral triangle's perimeter and a rectangle's perimeter have the same numerical value. The length of the rectangle is the same as the side of the triangle. The width of the rectangle is 12. What is the length of the rectangle?
A basketball is thrown with an initial upward velocity of 30 feet per second from a height of 6 feet above the ground. The equation h=-16t^(2)+30t+6 models the height in feet t seconds after the basketball is thrown. After the ball passes its maximum height, it comes down and then goes into the hoop at a height of 10 feet above the ground. About how long after it was thrown does it go into the hoop?
using a table of value determine the solution to the equation below to the nearest fourth of a unit
2^(-x) + 1 = 5^x + 2
x= -1.50
x= 2.50
x= -0.50
x= 0.75
In order to accumulate enough money for a down payment on a house, a couple deposits $300/month into an account paying 6% compounded monthly. If payments are made at the end of each period, how much money will be in the account in 5 years? What formula is required to complete this problem?
Indicate the general rule for this sequence. Find a 1 and the common difference. a 4 = 18 a 7 = 9
The general rule for the sequence is an = -9 + (n-1)(9). The first term (a1) is -9 and the common difference is 9.
Explanation:Sequence Analysis:
To find the general rule for a sequence, we need to determine the pattern or relationship between the terms. In this case, we are given a4 = 18 and a7 = 9. To find the common difference, we subtract the two terms: 18 - 9 = 9. So, the common difference is 9. To find a1, we can use the formula: an = a1 + (n-1)d, where n is the term number and d is the common difference. Substituting n = 4, a4 = 18, and d = 9, we can solve for a1. 18 = a1 + (4-1)(9), which gives us a1 = 18 - 3(9) = 18 - 27 = -9. Therefore, the general rule for this sequence is an = -9 + (n-1)(9). The first term (a1) is -9 and the common difference is 9.
a^1 = 27
d = -3
Step-by-step explanation: