Answer:
n=1,0101
Explanation:
considering n as the refractive index, then you can assume that the decrease of the speed, is because of the density of the medium where it's travelling, so we can translate this as :
[tex]n=\frac{c}{v}[/tex]
if your initial speed is C=100%V , then if it's decrease 1%, you have that V=99%.V (final Velocity)
[tex]n=\frac{c}{v}[/tex][tex]n=\frac{100V}{99V}[/tex][tex]n=\frac{100}{99}[/tex][tex]n=1,0101[/tex]I hope it helps you..
name the the leewards island
Answer:
There are total of thirty islands like British Virgin Islands, Anguilla, Saint Martin/Sint Maarten, Saint-Barthélemy, Saba, Sint Eustatius, Saint Kitts, Nevis, Barbuda, Antigua, Redonda, Montserrat, Guadeloupe, La Désirade, Marie-Galante.
Explanation:
Leeward means in the opposite direction of winds, such as westerlies and trade winds these terms used by sailing ships. Leeward islands are a group of Islands, located in the northeastern Caribbean sea located east of Puerto Rico, they are also referred to the northern islands of lesser Antilles chain. These islands are affected by volcanic activity, and notable eruptions have occurred in the history of these islands. Leeward island became a British territory in 1671, Most of the leeward islands are a part of the U.S territory and comprise a population of 700,000. The largest settlement in Les Abymes. Islands host diverse life forms both on land and seas.The Leeward Islands include Anguilla, Antigua and Barbuda, Saint Kitts and Nevis, and the British Vir-gin Islands.
The Leeward Islands are part of the Lesser Antilles in the Caribbean, positioned where the northeastern Caribbean Sea meets the western Atlantic Ocean. They are called "Leeward" because they are downwind from the prevailing trade winds, which makes them less exposed to storms compared to the Windward Islands.
List of Leeward Islands:
AnguillaAntigua and BarbudaSaint Kitts and NevisSaint BarthélemySabaSaint EustatiusSaint Martin (divided into French Saint-Martin and Dutch Sint Maarten)British Vir-gin IslandsU.S. Vir-gin IslandsThese islands are known for their tropical weather, beautiful beaches, and vibrant culture, making them popular tourist destinations.
How is pollution related to sustainability? Sustainability must incorporate ways of halting pollution entirely Sustainability incorporates methods of decreasing pollution. Sustainability needs to find a way to increase pollution. Sustainability uses the energy of pollution to drive the economy Sustainability and pollution will both increase in the future.
Answer:
Sustainability must incorporate ways of halting pollution entirely
Explanation:
The concept of sustainability in the production process means that an economic activity is performed without causing further damage to the environment. For example, for a paper mill it consumes 100 trees in the production process. To be considered sustainable, this firm must generate the benefit that these trees brought to the environment. This can be done in many ways, such as planting trees or directing funds to environmental causes. In other words, an economic activity is considered sustainable if it generates benefits to the same extent as the harm caused by its activity. If the company has polluted the environment, it must take steps to reverse the pollution it causes to be sustainable.
Motion of light at the constant speed of light tells us:
Different colors of light travel at different constant speeds.
Light moves instantly from all objects to Earth.
We see distant objects as they were long ago.
Light causes many optical illusions
Answer:
Different colors of light travel at different constant speeds.
Explanation:
The white light is composed of of different colors , i.e. , VIBGYOR , Violet , indigo , blue , green , yellow , orange , red .
When the white light is dispersed into different colors of VIBGYOR , all color bend by different velocities , and speed of the light is independent of time .
Hence , from the given options , the correct answer for eh motion of light , is , the Different colors of light travel at different constant speeds .
If the number of electrons in an atom is 39 and the mass number for the same atom is 90, calculate the the following for this atom: a) the number of protons b) the atomic number c) the number of neutrons d) What is the identity of this element?
Answer:
no. of protons = 39
atomic number = number of protons = 39
number of neutrons = 51
element is Yttrium
Explanation:
given data:
number of electron is 39
mass of atom is 90
We know that atoms are neutral because +ve charged protons is equal to no of -ve charged electrons.
we know that:
atomic number is equal to number of protons,
and atomic mass is the summation of no. of protons and no. of neutrons
number of protons = number of electrons
from the data given:
a) No. of protons = 39 (since number of electrons = protons)
b) atomic number = number of protons = 39
c) number of neutrons = atomic mass - atomic number
= 90 - 39
= 51
d) element is Yttrium
the majority of the east coast of the United States has this certain soil classification.
Vertisols
Entisols
Alfisols
Spodosols
Ultisols
Answer:
Ultisols
Explanation:
They are commonly known as red clay soils being acidic, these soil sare founding tropics, and subtropics. Lacking in calcium, magnesium, and potassium. they are produced due to weathering and are found 8% worldwide. They may be purplish red, brownish pale yellowish-orange. Having a pH of more than 5. The red and yellow color results from the iron oxides. They consist of 45% mineral and 5% organic matter. To avoid the decay of matter adding manure to the fall is advisable with a significance of 2 to 3 thick layer as they are easily exhausted. Contain more calcium carbonate.Answer:
the answer to this question is E ( Ultisols
Explanation:
What is meant by the half-life of an unstable element?
Answer:
Half-life is defined as the time required by an unstable element to reduce half of its original value. All unstable elements have a decay rate and this half-life differs from element to element. These unstable elements are known as radioactive elements. It continuously decays until it becomes a stable one. These elements when decays release radiations which are harmful to lives.
This half-life plays an important role in the determination of the age of a rock or fossils. It is used in various types of radiometric dating methods.
For example, the half-life of Carbon-14 is approximately 5700 years and the half-life of Uranium-238 is 4.5 billion years.
Question 1 of 10
0.5 Points
Which country controlled most of the territory in Latin America prior to Independence?
A. England
B. France
C. Germany
D. Spain
Reset Selection
Mark for Review What's This?
Question 2 of 10
0.5 Points
Prior to Independence, which country controlled the territory now known as Brazil?
A. England
B. Spain
C. Portugal
D. France
Reset Selection
Mark for Review What's This?
Question 3 of 10
0.5 Points
The term for a person of European descent born in Latin America is:
A. creole
B. mulatto
C. gringo
D. mestizo
Reset Selection
Mark for Review What's This?
Question 4 of 10
0.5 Points
The period before Independence is known as the _____ period.
A. Romantic
B. Realistic
C. Liberated
D. Colonial
Reset Selection
Mark for Review What's This?
Question 5 of 10
0.5 Points
A conquistador was:
A. An artist who explored Latin America
B. An artist involved in the conquest of the sublime
C. A Spanish explorer-soldier involved in the conquest of Latin America
D. A creole who sought independence from Spain
Reset Selection
Mark for Review What's This?
Question 6 of 10
0.5 Points
_____ was a Creole involved in the struggle for Latin American independence.
A. Simon Bolivar
B. Fidel Castro
C. Che Guevara
D. Francisco Goya
Reset Selection
Mark for Review What's This?
Question 7 of 10
0.5 Points
Europeans referred to the native peoples of Latin America as:
A. mestizos
B. creoles
C. Indians
D. Latinos
Reset Selection
Mark for Review What's This?
Question 8 of 10
0.5 Points
The first academy of art in Latin America was located in:
A. Mexico City
B. Buenos Aires
C. Lima
D. Santiago
Reset Selection
Mark for Review What's This?
Question 9 of 10
0.5 Points
Immediately following Independence, art in Latin America was dominated by images of:
A. Spanish horses
B. The King and Queen of Spain
C. Conquistadors
D. The leaders of Independence movements
Reset Selection
Mark for Review What's This?
Question 10 of 10
0.5 Points
Students in Academies of Art trained by copying:
A. Renaissance paintings
B. Greek and Roman styles
C. African masks
D. Mayan stone carvings
Reset Selection
Please give me the answer for these!!
Answer:
1. D
2. C
3. A
4. D
5. C
6. A
7. C
8. A
9. D
10. A
Explanation:
1. The country who controlled most of the territory in Latin America was Spain. Specially most part of South America and Central America.
2.The country who controlled the territory now known as Brazil was Portugal from the year 1500 to 1822.
3. Creole is a descendant of Europeans and was born in a Latin American country.
Mulatto is the son of a white person and a black person.
Gringo is a person who was born in the United States.
Mestizo is the son of parents of different races.
4. The period before independence is known as de Colonial period. This period extended from 1550, until 1898.
5. A conquistador was a Spanish explorer-soldier involved in the conquest of Latin America.
6. Simón Bolívar was a Creole involved in the struggle for Latin America independence. He was the founder of the republics of Gran Colombia and Bolivia.
Fidel Castro was a Cuban Marxist revolutionary. He was the president of Cuba after his victory against the dictator Fulgencio Batista.
Che Guevara was an Argentinian that commanded the Cuban revolution.
Francisco de Goya was a Spanish painter.
7. Europeans referred to the native peoples of Latin America as Indians or Índigenas (indigenous people).
8.The first Academy of art was located in Mexico City. The Academy of San Carlos founded in 1781.
9. The art in america latina was dominated by the images of the leaders of independence like Simón Bolívar or Jose de San Martín.
10. Students in Academies of art trained by copying Renaissance paintings.
What are the mechanisms whereby a) plants affect weathering, and b) weathering affects atmospheric CO2concentrations? Write the major equations involved for the most important reactions.
Answer:
Explained below.
Explanation:
Plants roots break the rocks and soil from the bottom and derive up nutrient form the steam to leaves and its due to this factor the planet are considered as an agent in biological weathering like animals that bring up the soil particles and displace the soil matter and expose the rocks at greater depths. Weathering is directly affected by the atmospheric conditions such as the concentration of atmospheric pollutants by the human-induced factors and the weathering created due to the erosion of base rocks and this happens in chemical weathering phases.An equation is given for reference
2(HCl) + CaCO3 ---> Ca+2 +2Cl- + H2O + CO2.
Here chemical distinction and breakdown of elements on earth surface take place.Question 4(Multiple Choice Worth 3 points) Which of the following formed at a divergent boundary? Marianas Trench Mid-Atlantic Ridge San Andreas fault The Hawaiian Islands The Himalayas
Answer:
Mid-Atlantic Ridge
Explanation:
It's here that the two oceanic crust split up an leads to the rising of magma or lava from the seafloor and thus this is called a divergent boundary and it leads to the creation of a new crust a new layer of rocks at the strata. Mid Atlantic ridges are existing since the creation of the earth and are a fundamental aspect of the formation of the plats on the surface of the earth. The upwelling of lava from the volcanic eruptions and earthquakes is result of the mantle plumes produced due to the this divergent boundary. Mid Atlantic ridges, thus account for the entire chain of the earth's surface features like mountain ridges, trenches, and deep-sea bottoms. Source of the convergence and other faults.How do we think Earth’s Moon formed?
A. The Moon was spun away from Earth shortly after Earth formed.
B. The Moon and the Earth formed at the same time from the same material.
C. The Moon was captured as it passed near Earth.
D. The Moon resulted from the impact of a Mars sized object with Earth. Much of the ejected material formed the Moon.
Answer:
D
Explanation:
Answer:
d
Explanation:
Question 5: For a planet in an elliptical orbit to "sweep out equal areas in equal amounts of it", it must... a) move slowest when near the Sun. b) move fastest when near the Sun. c) move at the same speed at all times. d) have a perfectly circular orbit.
Answer:
Option (B)
Explanation:
According to the Kepler's 2nd law regarding the planetary motion, as the planets moves in an elliptical path, orbiting around the sun, and the line joining both the sun and planet forms an equal amount of area in equal amount of time. This equal area in equal time is maintained by the faster speed of the planet near the sun (Perihelion) and slower speed of the planet at a distance away from the sun (Aphelion).
Thus, the correct answer is option (B).
The correct answer is (b) the planet must move fastest when it is near the Sun, as described by Kepler's equal-area law, which is part of his laws of planetary motion.
For a planet in an elliptical orbit to "sweep out equal areas in equal amounts of time," it must move fastest when near the Sun. This is known as Kepler's equal-area law, which is one of the laws that describe planetary motion. According to this law, the line connecting a planet to the Sun sweeps out equal areas during equal intervals of time, meaning that the planet travels faster when it is closer to the Sun in its elliptical orbit. This occurs because the gravitational pull is stronger when the planet is closer to the Sun, which accelerates the planet and increases its orbital speed. Therefore, the correct answer to the question is: b) move fastest when near the Sun.
Question 13(Multiple Choice Worth 3 points) Which of the following does not accompany volcanic activity in the Pacific Northwest? slab pull subduction ocean ridge mountain building convergent boundary
Ocean ridge does not accompany volcanic activity in the Pacific Northwest.
Explanation:
In this process the denser oceanic plate force the thinner continental plate to sink into the mantle. This region is referred as subduction zone, where it results in intense volcanic eruptions and earthquakes.
The denser Pacific plate sinks because of the chunk pull impact and it likewise prompts the development of mountains. This sort of impact creates profound center seismic tremors.
It isn't related with the maritime edge as the mid-maritime edge shapes in a disparate plate limit. In the Pacific Northwest , the volcanic activity is carried out by the geological process majorly by subduction.
Two tectonic plates are diverging along a Mid-Oceanic Ridge. Which of the following features would NOT be found along that type of plate boundary?
a. Shallow earthquakes
b. Strong, deep earthquakes
c. Rifting and Normal Faulting
d. Symmetrical "stripes" of positive and negative magnetism parallel to the ridge
e. New crust being created directly from the mantle
f. Transform boundaries perpendicular to the ridge
g. Fissure volcanoes
Answer:
In a Mid-Ocean Ridge we are not going to find Strong, deep earthquakes
Explanation:
A Mid-Ocean Ridge is produced by divergence between plates, what generates a rift zone with normal faults; this kind of faluts are the result of tensional stress, that makes blocks to fall. When blocks are falling, they can produce some shallow earthquakes.
As plates are separating, there is growing a space between them and this allows magma to arrive to the surface, creating fissure volcanoes that are being part of the new crust that is being created. When rocks get cold, their magnetic minerals get oriented to the magnetic north, for that reason, as magma (next rocks) is being desposited at both sides of the ridge, we can find symmetrical stripes of positive and negative magnetism parallel to the ridge.
When ridges break up because of stress differences in the different segmentes, transform boundaries appear to conect all the ridge. On transform boundaries the displacement is horizontal, for that reason the are perpendicular to the divergent boundaries.
The Strong and deep earthquakes are not going to find under Mid-Ocean Ridge.
What is a Mid-Oceanic Ridge?A mid-ocean ridge refers to a seafloor mountain system which is constituted by plate tectonics.
It has an extent of about 2,600 meters and arises about 2,000 meters preceding the deepest percentage of an ocean basin. This dimension is where seafloor dispersive takes place along a different plate boundary.
It is created by separation between plates, which creates an opening zone with average faults. This kind of faults are the outcome of tension stress, that makes blocks to fall. They can produce some shallow earthquakes, when blocks are gone down,
There is growing a space between them and this allows magma to arrive to the surface, As plates are separating. And creates fissure volcanoes that are being portion of the new layer that is being created.
When rocks get cold, we find symmetrical stripes of positive and negative attraction parallel to the ridge and New crust being created directly from the mantle.
Therefore, option A is correct.
Learn more about Ridge, refer to:
https://brainly.com/question/23027321
which of the following characteristics suggests that an Air Mass is "mP"?
Source region is the Arctic basin and Greenland ice cap
Associated with Occasional periods of clear, cool weather in summer
Associated with low clouds and showers in winter
Unstable in winter; stable in summer
Warm and humid entire year
Answer:
Maritime Polar air masses are cool, moist, unstable thus found over Arctic basin and greenland ice caps.
Explanation:
Air mass is the volume of air defined by temperature and water vapor. Covering hundred and thousands of miles. Cooler are being found over the arctic. They move southwards along the Rockies into the plains then eastwards. These air masses collect warm and mist winds, originating in north Atlantic. The center of the air mass has high pressure and surrounded by lower air pressure at higher latitudes. Antarctica and arctic circle are dominated by such air massesAn 'mP' or maritime Polar air mass comes from the Arctic basin and Greenland ice cap. It brings clear, cool weather in summer and includes low clouds and showers in winter. It's usually unstable in winter but stable in summer.
Explanation:The characteristics that suggest an Air Mass is 'mP' or maritime Polar include the source region being the Arctic basin and Greenland ice cap. It is also associated with occasional periods of clear, cool weather in the summer and low clouds and showers in winter. Maritime Polar air masses are generally unstable in winter and stable in the summer. However, they are not typically warm and humid the entire year.
Learn more about mP Air Mass here:https://brainly.com/question/31539458
#SPJ6
A surface of erosion on metamorphic or igneous rocks below sedimentary rocks is a(n): OA) nonconformity. OB) disconformity. OC) angular unconformity. OD) anticonformity. OE) none of the above
Answer:
Nonconformity
Explanation:
There are four different types of unconformity
Nonconformity is when there is an erosional surface on a metamorphic or igneous rock and we find sedimentary rocks (layers) over them
Disconformity is between sedimentary rocks that are divided by a surface of erosion and the have the same attitude
Angular unconformity is also between sedimentary rocks divided by an erosional surface, the difference here is that the have different attitude
Paraconformity Between sedimentary rocks without erosional surface and same attitude, the explanation is that there was a period withput deposition and without erosion
Which of the following radiations has the shortest wavelength?
Question 36 options:
X-rays
Near Infrared
Visible light
Ultraviolet
Answer:
X-rays
Explanation:
X-rays are a higher frequency than the other three. A higher frequency has a shorter wavelength.
A common radio wavelength observed coming from astronomical objects is 21 cm. what temperature is associated with this radiation? 1st attempt See Hint Feedback 13.8
Final answer:
The 21 cm line in radio astronomy is significant for studying hydrogen in space; it has a wavenumber of about 4.76 m-1, an ordinary frequency of approximately 1.43 GHz, and an angular frequency around 8.98 × 10^9 rad/s. Long wavelengths are often emitted by cold, extended objects such as gas clouds, whereas short wavelengths are indicative of hot, energetic environments.
Explanation:
The 21 cm line is an important radio wave in radio astronomy, originating from the transition between the hyperfine levels of the ground state in neutral hydrogen. This specific wavelength allows astronomers to measure the galaxy's structure and motion. To calculate the wavenumber, you divide 1 by the wavelength in meters, which for 21 cm (0.21 m) gives us a wavenumber of approximately 4.76 m-1.
To find the ordinary frequency, you divide the speed of light by the wavelength in meters: frequency = c / λ = (3 × [tex]10^{8}[/tex]m/s) / (0.21 m) ≈ 1.43 GHz. The angular frequency is given by 2π times the ordinary frequency, which is about 8.98 × 109 rad/s.
Objects emitting radiation at very long wavelengths, like the 21 cm line, are typically large, cold structures such as gas clouds, while short wavelength radiation can be associated with very hot, energetic events like supernovae or accretion disks around black holes.
Question 19 Which variable gas plays a major role in the formation of a) Nitrogen b) Oxygen c) Carbon Dioxide d) Water Vapor
Answer:
c) Carbon Dioxide
Explanation:
The majority of the variable gases are carbon dioxide, Water, Oxygen and Nitrogen all these one of the most for the existence of life on earth but out of these most variable gas found in the atmosphere is carbon dioxide. Found in all sorts of places and is a compound on the greenhouse gas it has existed on earth for thousands of years long. It is a major contributor to the balancing of the energy and heat budget of the planet. Apart from this carbon is needed as a driver of energy in the atmosphere as it absorbs heat and radiated it in the form of light and needed by the plants for carrying out their processes.Question 2(Multiple Choice Worth 3 points) Which of the following is most dense? asthenosphere continental crust core O mantle oceanic crust
Answer:
Mantle oceanic crust
Explanation:
The Asthenosphere consists of heavier elements like aluminum, magnesium basaltic rocks and made up of old oceanic plates. This liquid layer is based on deformation properties. Which are later characterized by Isostatic adjustment? Due to high temperature and pressure conditions in this layer the rock is in the molten state. Plates above move in n ductile manner as the oceanic crust has a density of 3.0 g/cm cube, and that of continental crust is about 2.83 g/cm cube. Thus lighter plates or continents can move on this layer as they are less dense and hence they, later on, move back into the same oceanic trenches through the process of subduction.What's a great problem statement for fracking?
Answer:
Fracking is the high amount of the water that can be significantly used for transportation in the environment. In the fracking process, there is low water intensity as compared to fossil fuels.
In terms of water and air pollution, the potential of the oil spills are increased and due to this it harm all the vegetation and surrounding soil in the environment. The fracking also cause earthquake because of the high pressure.
Answer:
Its harmful, because its unhealthy for workers and its harmful to the environment and to the people.
Explanation:
Why are nighttime mixing ratios of ozone always nonzero in the background troposphere (think of rural areas) but sometimes zero in urban areas?
Answer:
The newly transmitted toxins blend with different poisons, including ozone, present in foundation air, and a confounded procedure of synthetic responses and nonstop weakening happens.
Introduction to ozone instigates impacts on well being and the earth, causing respiratory challenges in touchy individuals and conceivable harm to vegetation and biological systems.
Night time mixing ratios are always nonzero in the background troposphere but sometimes zero in urban areas.
Photo chemical pollution is formed from emissions of nitrogen oxides [tex](NO_x, where NO_x = NO + NO_2)[/tex] and of volatile organic compounds (VOCs) and carbon monoxide (CO) in the presence of sunlight.
Final answer:
At night, the background troposphere maintains nonzero ozone levels due to consistent low-level production and fewer pollutants that destroy ozone, whereas urban areas may have zero ozone levels at times because nighttime reactions can consume ozone without the presence of sunlight to produce more.
Explanation:
The presence of nighttime mixing ratios of ozone being nonzero in rural areas but sometimes zero in urban areas is due to differences in ozone production and destruction processes. In the background troposphere, ozone is produced by the interaction of sunlight with oxygen molecules and various pollutants such as volatile organic compounds (VOCs) and nitrogen oxides (NOx) which are less prevalent in rural areas. This results in a constant, albeit low, level of ozone at night.
In contrast, urban areas have higher concentrations of these pollutants due to more motor vehicle exhaust, industrial emissions, and higher energy consumption leading to more intense photochemical reactions. This can lead to higher daytime ozone levels. However, at night, the lack of sunlight halts the production of ozone, and urban areas may have more substances that react with and consume ozone, such as nitric oxide (NO), which can lead to occasionally zero ozone levels at night. The nocturnal ozone levels in urban areas can be more variable due to these factors.
What is the relationship between heat production and resistance as related to electricity?
Answer:
Heat produced is directly proportional to resistance
Explanation:
Heat produced is directly related to the resistance if resistance will be more then heat production will also be more
The heat in produced is given by [tex]H=i^2RT[/tex], here i is current, Ris resistance and T is temperature.
From the relation we can see that heat is directly proportional to resistance so if we increase the resistance then heat produced also increase and if decrease the resistance heat produced decreases.
Question 2 Multiple Choice Worth 1 points) Which of the following is an example of how a water system is contaminated by non-point source pollution? Hikers toss food packaging into a mountain stream. Chemicals from batteries in a landfill leach into the groundwater supply. Several inches of acid rain fall over a lake. An oil pipeline bursts along the ocean floor. Fertilizers applied to a crop field run off the soil and into a river.
Answer:
One example of how a water system is contaminated by non-point source pollution is Several inches of acid rain fall over a lake.
Explanation:
Examples of non-point source pollution are mostly associated to rainfall or even snow melt. All the other alternatives in this question are examples of point source pollution. They all come from direct sources. The rainfall, however, is a diffuse form of pollution since it is spread throughout the lake.
how are the products and resources we consume actually produced?
fquestion from Environmental Science a study of interrelationships
Answer:
Product and resources are dependent on the environment such as fish , vegetables and milk.
Explanation:
As today's consumption pattern is determined by the environmental resource base as the real issue is not the type of consumption but the nature of consumption itself. About 85% of paper products that we consume comes from the natural resource on land. Similarly, many experts predict that the population will decrease at some point in time due to the resource that consumed are already reached its full capacity. Changes in consumption patterns have a direct bearing on the growing demands of people in various parts of the world. Resources and products that are manufactured from the raw form to finished from a that includes the carbon content and their daily consumption leads to overconsumption of resource.Answer:
Today, the production of goods, resources and services takes place through production chains, where 3 clearly differentiated productive sectors are identified:
1- the primary sector is in charge of the production of raw materials, through their generation and extraction from the natural environment to be used for the production of products or direct consumption by society. Example of primary activities can be agriculture or mining.
2- the secondary sector is the one that transports and processes the raw materials, finalizing the transformation of the raw material into a new product that satisfies a particular social need. Industrial activity is a secondary activity, which modifies these raw materials by launching processed products onto the market.
3- Lastly, the tertiary sector is in charge of marketing the processed and / or natural products directly for human consumption, that is, they bring goods and services closer to consumers. A clear example of tertiary activity is that of supermarkets or advertisers.
Which of these elements is an artistic innovation in the painting Madonna Ognissanti by Giotto?
a.
Mary shows physicality
b.
Background is golden, representing God’s presence
c.
Composition is symmetrical
d.
Faces are generic
Answer:
a. Mary shows physicality
Explanation:
The innovative work done by Giotto is the presence of human figure and its relationship with the outer world .
The options b , c , d shows the traditional methods of painting like background is golden and there is no symmetry because Mary and child is larger in shape with respect to the angels .
Faces shown can be generic or it might not be .
Hence , the most appropriate answer is ( a ) .
Final answer:
Giotto's innovative element in Madonna Ognissanti was the use of an architectural and earthly setting to introduce depth and space, presenting the figures in a relateable and naturalistic manner.
Explanation:
The artistic innovation in the painting Madonna Ognissanti by Giotto that the question refers to is the use of an earthly setting and architectural elements to create a sense of space and depth, a departure from the flat gold background representing divine space typical of the time. Unlike his predecessors Cimabue and Duccio, Giotto introduced an architectural space for each of the subjects, such as the Madonna and the angel, adding to the illusionism present within these cycles. This contributes to the representation of Mary as a figure relatable on earth and presents a significant leap toward a more naturalistic and humanized portrayal in art. The correct answer to the question would be letter a, expressing Mary's physicality and humanity.
Which of the following is supposed to be the basis for putting organisms in the same taxon (zoological or phylogenetic category)?
a. all phenotypic traits
b. homologous traits
c. analogus traits
d. only similarities that have evolved since the time of their common ancestor
Answer: d. only similarities that have evolved since the time of their common ancestor.
Explanation:
A taxon is a group of one or more members of the organisms that forms a single unit based upon common characteristics they acquire through inheritance or they acquire from their environment.
The taxon can include the shared characteristics that suggests that all living beings are descendants of the common ancestor. They exhibit similarities in the genetic make up that is DNA. It is expressed by the genes through transcription and translation.
Does weathering of carbonates produce the same effect on atmospheric CO2as weathering of silicates? Explain your answer.
Answer:
Explained
Explanation:
The weathering of carbonate rocks or minerals, produce different acids as well as water. Some acids are hydrochloric acid, carbonic acid also bicarbonate. Again they break down from the element to produce CO2 into the atmosphere.
The main source for the generation of atmospheric CO2 is from the carbonates on the earth. But weathering of silicate does not liberate much CO2 than carbonate. The carbonation is more effective in weathering than silicate. Most of alkali metal like sodium, potassium, calcium and magnesium undergo the process of carbonation. Silicate minerals contribution to atmospheric CO2 is very less.
3. Which of the following only happens within the arctic or antarctic circle?
A. The Sun reaches the zenith
B. The Sun rises in the west and sets in the east
C. The Sun does not cross the meridian
D. The Sun is up for 24 hours at a time
Answer:
C. The Sun does not cross the meridian, which is an imaginary line.
Explanation:
As all Meridien converges at the north and south poles, as there are no longitude or meridian lines running at this place so the sun continues to remain suspended at the same place throughout the day. As the solar noon is at other places on the earth and not at the poles of arctic and antarctic. Thus the sun does not go up or down this meridian. Rather its altitude in the sky constantly increases in winters, and sping and decreases in summers. All of this takes place due to the rotation of the planet on its axis. The tilt in motion creates an inclination for the sun rays falling on earth.Final answer:
The correct answer is D. The Sun is up for 24 hours at a time.
Explanation:
The Arctic and Antarctic Circles are significant because within these regions, polar day and polar night phenomena occur. Specifically, north of the Arctic Circle and south of the Antarctic Circle, the sun does not set for a full 24-hour period around the time of the summer solstice, resulting in what is called the "midnight sun". Conversely, during the winter solstice, these regions experience a 24-hour period without sunlight, known as the "polar night". This phenomenon does not occur anywhere outside of the polar circles. The sun never reaches the zenith, which only occurs up to 23.5 degrees from the equator (in the Tropics), and it never rises in the west and sets in the east nor does it fail to cross the meridian in a regular diurnal cycle outside of these unique polar day or night conditions.
plate boundary, what is the result O A mountain belt, like the modern Himalayas 0 A continental volcanic arc like the modern Andes. O Earthquakes, but no volcanism, like the modern San Andreas Fault in California.
Answer:
All the above
Explanation:
The plate boundary is the result of movements in the latest either through the divergence, convergence or the formation transform or rift valleys. The occurrence of the earthquakes and volcanic eruptions around the zones of mountain belts and various other events led to the volcanic arcs. A Mountain belt-like system of the Himalayas in Northern India is a result of the orogenic upliftment of sediments bright from the Tethys sea and splitting of the Indian subcontinent from the Australian plate to collide with the Eurasian plate. A continental volcanic arc forms due to the lava a magma that originates in the form mantle plums produced due to the burning of the lighter plate over the oceanic plate and volcanoes like the Andes form when the slab pulls the plate to the deep trenches. And the san Andreas fault in California is a transform fault with dextral movements on both sides as the landmass is drifting westwards.Explain the positive and negative effects of globalization on environment?
Answer:
Various positive and negative elements of globalization on environment
Explanation:
Globalization is explained as the progress of going global in terms of technology and culture, the connection of global networks with trade, capital flows and the spread of technology. The positive effects include several factors like the development of resources, development of trade and standards so that the environment laws can be established. Cheaper consumer goodsNegative aspects are
Lower environmental standardsTrade And export of valuable stuff lead to the creation of strict competition, as a result, the quality of the natural environment degrades.
Overexploitation of natural resources.The given opportunities to produce the more natural resources are exploited and their growth gets hampered.