If the temperature of a gas is raised from 30°C to 60°C, what happens to the pressure?

Ni (s) + 2 HNO₃ (aq) → Ni(NO₃)₂ (aq) + H₂ (g)

Explanation:

We have the following balanced chemical equation:

Ni (s) + 2 HNO₃ (aq) → Ni(NO₃)₂ (aq) + H₂ (g)

where:

(aq) - aqueous  (dissolved in water)

(g) - gaseous

To balance the chemical equation the number of atoms of each element entering the reaction have to be equal to the number of atoms of each element leaving the reaction, in order to conserve the mass.

Learn more about:

balancing chemical equations

https://brainly.com/question/13915102

#learnwithBrainly

Answer:

[tex]\large \boxed{\text{0.30 g }}[/tex]

Explanation:

1. Calculate the moles of NaOH

[tex]\text{Moles of NaOH} = \text{0.050 L solution} \times \dfrac{\text{0.15 mol NaOH}}{\text{1 L solution}} = \text{0.0075 mol NaOH}[/tex]

2. Calculate the mass of NaOH

[tex]\text{Mass of NaOH } = \text{0.0075 mol NaOH } \times \dfrac{\text{40.00 g NaOH }}{\text{1 mol NaOH }} = \textbf{0.30 g NaOH}\\\\\text{You need $\large \boxed{\textbf{0.30 g of NaOH}}$ to prepare the solution}[/tex]

Answer:

Mass = 547.2 g

Explanation:

Given data;

Mass of F₂ = ?

Moles of F₂ = 14.4 mol

Solution:

Formula

Number of moles = mass/ molar mass

Mass = number of moles × molar mass

Molar mass of F₂ =  38 g/mol

Mass = 14.4 mol × 38 g/mol

Mass = 547.2 g

The mass of 14.4 moles of F₂ is 547.2 grams.

To solve this, we need to know the molar mass of fluorine gas (F₂). Each fluorine atom has an atomic mass of approximately 19.0 g/mol. Since F₂ is a diatomic molecule, its molar mass is:

19.0 g/mol × 2 = 38.0 g/mol

Now, we multiply the molar mass by the number of moles given:

14.4 mol × 38.0 g/mol = 547.2 g

Thus, the mass of 14.4 moles of F₂ is 547.2 grams.

Answer:

Elements :)

Explanation:

Neon (Ne), being an element, is the substance that cannot be decomposed by chemical means from the given list. All other options are chemical compounds that can be decomposed into elements.

The question is about identifying a substance that cannot be decomposed by chemical means from a given list. Substances that cannot be chemically decomposed are known as elements, which are the most basic form of matter that cannot be broken down into simpler substances. Based on the options provided (Ne, N₂O, HF, H₂O), Neon (Ne) is an element and thus cannot be decomposed chemically into simpler substances.

The rest of the substances are chemical compounds: N₂O (nitrous oxide), HF (hydrogen fluoride), and H2O (water). These compounds can be decomposed into their elements by chemical reactions, such as hydrolysis or electrolysis for water. Therefore, the correct answer is Ne, which is an inert noble gas and an element that cannot be decomposed by chemical means. Option A

Answer:

Dunes are loose sand hills.

Loess is a compacted wind-blown formation of sediment.

Explanation:

Sand dunes are, as their name implies, made of sand which is itself made of tiny quartz pieces. Sand dunes are present where there is a ready source of broken down sandstone or other type of rock and wind to transport the sand. The dunes are mobile and loose and migrate over time.

Loess comes in vast formations and was created in a very different way. In the last ice age, winds from the north carried sediments loosened and ground by glaciers southwards. There, the sediments accumulated in large formations and became compacted over time.

Answer:

C. Speed is the distance per unit of time. Velocity is the displacement per unit of time.

This answer accurately describes the difference between speed and velocity.

Explanation:

A. If speed is constant, then velocity is also constant.

The above statement is not correct, the correct statement is if speed is constant its velocity is not necessarily constant.

Example: An object in uniform circular motion has constant speed but its velocity changes at every instant due to change in direction.

B. Speed requires direction. The direction doesn't matter when calculating velocity.

The above statement is not correct, the correct statement is

Speed does not require direction. The direction is necessary for calculating velocity.

Speed, a scalar quantity, requires magnitude only not the direction.

Velocity is vector quantity, requires magnitude as well as direction.

C. Speed is the distance per unit of time. Velocity is the displacement per unit of time.

The above statement is correct i.e.

Speed is the distance per unit of time. Velocity is the displacement per unit of time.

9.17 mL

In this question we are given;

NaOH(aq) + HCl(aq) → H2O(l) + NaCl(aq)

We are required to determine the volume of the alkali, NaOH used;

Molarity = Number of moles ÷ Volume

Thus, rearranging the formula;

Moles = Molarity × volume

          = 0.055 M × 0.025 L

          = 0.001375 moles

Therefore;

Hence; Moles of NaOH = 0.001375 moles

Molarity = Moles ÷ Volume

Volume = Moles ÷ Molarity

Therefore;

Volume of NaOH = 0.001375 moles ÷ 0.150 M

                             = 0.00917 L, but, 1 L = 1000 mL

                             = 9.17 mL

Therefore, the volume of NaOH required is 9.17 mL

To react completely with 3.70g of dry slaked lime, 1.12 liters of chlorine gas would be required at STP, based on mole calculations and the ideal gas law.

To calculate the volume of chlorine gas that would react completely with 3.70g of dry slaked lime (Ca(OH)₂), we need to follow a series of steps:

First, we calculate the moles of Ca(OH)₂ using its molar mass (Ca = 40, O = 16, H = 1). The molar mass of Ca(OH)₂ is: (40) + (2 x 16) + (2 x 1) = 74 g/mol.

Next, we find the moles of Ca(OH)₂ in 3.70g by dividing the mass by the molar mass: moles of Ca(OH)₂ = 3.70 g / 74 g/mol = 0.05 moles.

According to the equation, 1 mole of Ca(OH)₂ reacts with 1 mole of Cl₂. Therefore, we need 0.05 moles of Cl₂.

We use the ideal gas law at standard temperature and pressure, where 1 mole of a gas occupies 22.4dm³. The volume of Cl₂ needed is 0.05 moles x 22.4 dm³/mole = 1.12 dm³, or 1.12 liters.

Therefore, 1.12 liters of chlorine gas would be required to react completely with 3.70g of dry slaked lime at standard temperature and pressure (STP).

Answer: Brownian motion or pedesis is the random motion of particles suspended in a fluid resulting from their collision with the fast-moving molecules in the fluid. This pattern of motion typically alternates random fluctuations in a particle's position inside a fluid sub-domain with a relocation to another sub-domain.

Answer:

Neither  

Explanation:

I plotted the graph of atomic radius vs. ionization energy for the first 10 elements.  

It shows neither a direct nor an inverse relationship.

However, it is clear that atomic size decreases as ionization energy increases.

Plotting atomic radius against first ionization energy reveals an inverse relationship; as atomic radius increases, the first ionization energy typically decreases.

If you plotted atomic radius versus first ionization energy, the graph would reveal an inverse relationship. This is because, generally, as atomic radius increases, the first ionization energy decreases. The ionization energy is affected by the principal quantum number (n) and the effective nuclear charge (Zeff), which relates to the strength of attraction between the nucleus and the valence electrons. Hence, a larger atomic radius means that the valence electrons are further from the nucleus and more shielded by other electrons, reducing the energy required to remove them. When plotting a graph of atomic radius versus first ionization energy, one would observe that points on the graph move downward as you go from top to bottom (from elements with a smaller atomic radius and higher ionization energy to elements with a larger atomic radius and lower ionization energy).

energy of the wave is equal to 43.6 × 10⁻²¹ J

Explanation:

The energy of a wave knowing the frequency is calculated using the following formula:

energy = plank constant × frequency

energy = 6.63 x 10⁻³⁴ J·s × 6.58 × 10¹³ s⁻¹ (Hz)

energy = 43.6 × 10⁻²¹ J

Learn more about:

energy of a electromagnetic wave

https://brainly.com/question/518150

https://brainly.com/question/1441437

#learnwithBrainly

Answer:

Explanation:

Chemical equation;

2C₁₀H₂₂ + 31O₂  → 20CO₂ + 22H₂O

a) how many moles of O₂ are needed to completely react with 1.0 mole of C₁₀H₂₂?

Given data:

Moles of C₁₀H₂₂ = 1.0 mol

Moles of O₂ needed = ?

Solution:

we will compare the moles of C₁₀H₂₂ with O₂.

                            C₁₀H₂₂          :            O₂

                                 2              :             31

                                 1.0            :            31/2×1.0 = 15.5 mol

So 15.5 moles of oxygen are needed to react with 1.0 moles of C₁₀H₂₂ .

B) if a car produces 44 g of CO₂, how many grams of C₁₀H₂₂ are used up in the reaction?

Given data:

Mass of CO₂ = 44 g

Mass of C₁₀H₂₂ = ?

Solution:

Number of moles of CO₂:

Number of moles = mass/ molar mass

Number of moles = 44 g/ 44 g/mol

Number of moles = 1 mol

Now we will compare the moles of CO₂ with C₁₀H₂₂.

                          CO₂       :          C₁₀H₂₂

                             20       :              2

                              1         :           2/20×1 = 0.1 mol

Mass of C₁₀H₂₂:

Mass = number of moles × molar mass

Mass = 0.1 mol  × 142.3 g/mol

Mass = 14.23 g

14.23 g of C₁₀H₂₂ are used up in this reaction.

c) if you add 28.8 g of C₁₀H₂₂ to your fuel, how many moles of O₂  are used up in the reaction?

Given data:

Mass of C₁₀H₂₂ = 28.8 g

Moles of oxygen used = ?

Solution:

Number of moles of C₁₀H₂₂ = mass/ molar mass

Number of moles of C₁₀H₂₂ = 28.8 g /142.3 g/mol

Number of moles of C₁₀H₂₂ = 0.20 mol

Now we will compare the moles of C₁₀H₂₂ with oxygen.

                      C₁₀H₂₂            :            O₂

                         2                  :             31

                       0.20               :             31/2×0.20 = 3.1 mol

By adding 28.8 g of C₁₀H₂₂ 3.1 moles of oxygen will used.

Taxonomy is the procedure for ranking plants.

Explanation:

The plants are ranked depending upon the resemblances and differences it has from another kind of plants. They can be ranked depending upon their leaves, roots, stems and other structures. They are defined into more general categories depending on the similar traits in the same group.

The plants are broadly classified into vascular and non vascular .Example, a flowering plant is a higher green plant and based on its gross structure does lie in the kingdom of Plantae, not in fungus or bacteria.

The most efficient method would be to passing a magnet through the mixture.

Explanation:

a) passing a magnet through the mixture

It is the most efficient method to separate the iron fillings and the salt. The iron will be attracted by the magnet, because the presence of the unpaired electrons in the iron which induces paramagnetic properties and it will be attracted by the magnet, while the salt, which most probably sodium chloride which does not have unpaired electrons so it will be a diamagnetic compound that is not be attracted by a magnet.

b) sorting the mixture by hand

It is a ineficient way to separate the iron from the salt because it will require a lot of energy and time.

c) distilling the mixture

It is extremely hard to do that because iron and salt have very high boiling points.

Learn more about:

separating mixtures

https://brainly.com/question/64216

https://brainly.com/question/13360045

#learnwithBrainly

The best way to separate a mixture of iron filings and salt is to use a magnet, which attracts the iron. The other methods (sorting by hand, distilling) are less efficient and not suitable for this mix.

The most efficient method to separate a mixture of iron filings and salt is to pass a magnet through the mixture. This is because iron is magnetic, while salt is not. The magnet will attract the iron filings and leave the salt behind. Following this process, you could rinse or carefully brush the iron filings off the magnet. This is a simple process called magnetic separation.

Sorting the mixture by hand or distilling the mixture is not recommended. Manually sorting can be tedious and might not effectively separate all the iron filings while distilling is usually used to separate liquid mixtures, not solids like iron filings and salt.

https://brainly.com/question/34301663

#SPJ12

Answer:Brain

Explanation:

Answer:

It is the nerves :)

Explanation:

Answer:

The correct answer is A balanced

Explanation:

Redox reaction belongs to specific type of chemical or biochemical reaction in which oxidation and reduction occurs simultaneously.

      For example

           6CO2+12H2O=C6H12O6+6O2+6H2O

The above reaction is a redox reaction because in this reaction CO2 is reduced to form glucose whereas H2O is being oxidized to form O2.

   Redox equations are balanced when the total increase in the oxidation number equals the total decrease in the oxidation number.

Answer:

A. balanced

Explanation:

Hello,

In this case, redox reactions undergo when one the elements at the reactants suffers an increase in its oxidation state and other elements suffers a decrease in its oxidation state. Thus, one could consider the following example:

[tex]H_2+I_2\rightarrow HI[/tex]

In that case, both hydrogen and iodine have zero as their oxidation states at the reactants whereas they go +1 and -1 respectively at the hydroiodic acid as shown below:

[tex]H_2^0+I_2^0\rightarrow H^+I^-[/tex]

In such a way, each hydrogen increases by 1 electron (two electrons in total as there two hydrogens) and iodine decreases by 1 electron (two electrons in total as there two iodines). Thus, the balance turns out:

[tex]H_2^0\rightarrow 2H^++2e^-\\I_2^0+2e^-\rightarrow 2I^-\\\\\\2H_2+2I_2\rightarrow 4HI\\\\H_2+I_2\rightarrow 2HI[/tex]

Therefore, redox equations are A. balanced when the total increase in oxidation numbers equals the total decrease in oxidation.

Best regards.

Answer:

soil A mixture of weathered rock and decayed plants and animals. Plants need soil to grow. Soil is the top layer of Earth's land surface, in many places.

Explanation:

Soil is the mixture composed of eroded rocks, organic matter from decayed plants and animals, minerals, and other materials vital for plant growth and ecological foundations.

The material you're asking about, which is a mixture of small pieces of rock with decayed plants and animals, is known as soil. Soil is a blend of various components, including eroded rock, minerals, organic matter, and other materials. These ingredients are critical for supporting plant life and form the fundamental layers of terrestrial ecosystems.

The organic matter in soil typically comes from decaying plant and animal matter, which can vary from freshly fallen leaves to more fully decomposed materials, known as detritus. Additionally, soil may include biologic precipitates, fragments of rocks such as sand, silt, or clay, and in some cases, paths created by earthworms and burrows from moles.

Answer:

Volume of gas ( V ) = 19.8935 L

Explanation:

Data Given:

no. of mole of gas (n) = 21.0 mole

Pressure P = 78.0 atm

Temperature T = 900 K

Ideal gas constant = 0.08206  L atm K⁻¹ mol⁻¹

Volume of gas = ?

Formula used for Ideal gases

                                                PV = nRT

As we have to find volume of the gas:

We will rearrange the ideal gas equation as below:

                                         V = nRT / P  ........................................... (1)

Put value in equation (1)

                  V =  21.0 mol x 0.08206  L atm K⁻¹ mol⁻¹ x 900K / 78.0 atm

                  V = 19.8935 L

Volume of gas V = 19.8935 L

Answer:

A

Explanation:

Earthquakes are said to occur at faults where tectonic plates run into each other because they have been observed to occur at those tectonic plate boundaries.

Part of the evidence for the theory of plate tectonics is the predictable occurrence of earthquakes and volcanoes along plate boundaries. The Pacific Ring of Fire is an example of a seismically active zone that has been observed and labelled based on the noted activity.

Answer:

1st you read the column that has the subject then the tally column last you determine/read the frequency column

Explanation:

Answer:

hydrogen ions

Explanation:

because acid is the specie that have ability to donate proton or forming bond with electron pair

Acidic solutions have high concentrations of hydrogen ions.

When an acid dissociates in aqueous solution, it releases hydrogen ions, leading to increased H+ concentration and making the solution acidic. This is due to the higher proportion of H+ ions compared to hydroxide ions in acidic solutions.

Answer: 13 proton, 10 electron and 14 neutron.

Explanation: electron are 10 because 3 electrons are transfer to other atom.

Answer:

Proton = 13

Electron = 10

Neutron = 14

Explanation:

Al3+ means Al that  has lost 3 electrons. Al has 13 protrons and 13 electrons. Having lost 3 electrons, Al3+ is left with 10 electrons.

Neutron + protron = relative atomic number

n + 13 = 27

n = 27 - 13 = 14

TRUE

Explanation:

Covalent bonding occurs when pairs of electrons are shared by atoms. Atoms will covalently bond with other atoms in order to gain more stability. By sharing their outer most electrons, atoms can fill up their outer electron shell and gain stability. So, it is true.

Answer: 0.088 moles

Explanation:

Parameters given:

Mass of AgNO3 = 15.0g

To know the number of moles, given such parameter, we need to find and use the molecuar weight formular. The molecuar weight is mass per mole

Molecular weight = mass / mole

Molecular weight of AgNO3

Ag + N + 03

107.8682 + 14.0067 + 15.9994(3)

(Note, that the weight of each compounds are standards)

= 169.8731g/mole

Using our molecular weight formular

Moles of AgNO3 in 15.0g

Let Number of Moles be represented as Y

169.8731g/mole = 15.0g / Y

Therefore,

Y = 169.8731 / 15.0g

Y = 0.088 moles

No of Moles of AgNo3 in 15.0g = 0.088moles

Two compounds can have same percentage composition but different molar mass, where the composition of each element contributed into the total mass can be same for two compounds irrespective of their molar mass.

Percentage composition of a compound is the mass by percent of its constituent elements of groups.  Molecular mass of a compound is the sum of the mass of its constituent elements.

Let AB₂ be a compound and the total molecular mass be X,the percentage of A be a% and that of b being b%, where b will be greater since there are 2 B groups.

There can be compounds with a % of A and b% of B but with different molar mass. Thus, there will be compounds which contains same mass percent of one elements.

To find more on percent composition, refer here:

https://brainly.com/question/17505281

#SPJ3

Final answer:

Two compounds can have the same percentage composition but different molecular masses because they can be structural isomers, which have the same number and types of atoms but arranged differently resulting in different properties and molar masses.

Explanation:

Compounds with Same Percentage Composition and Different Molecular Masses

Two compounds can have the same percentage composition but different molecular masses due to the phenomenon of isomerism. Isomers are molecules that have the same molecular formula, meaning the same number and types of atoms, but with the atoms arranged in a different manner. This results in different structures and potentially different physical properties, including molecular masses. The percentage composition only reflects what percent of the compound's total mass is made up by each type of atom, regardless of the compound's structure.

For instance, structural isomers have the same chemical composition but different arrangements of atoms and different chemical bonding, leading to different molar masses. To determine the percentage composition, one would divide the atomic mass of each element by the total molar mass of the molecule. However, this calculation doesn't account for the structural differences between isomers.

Examples of this include butane and isobutane, both of which have the molecular formula C4H10 but differ in structure and therefore in their molar mass. Such scenarios illustrate the importance of not only considering the percentage composition but also the molecular structure when identifying and comparing substances.

Answer:

[tex]8.4322\times10^{24} atoms[/tex] atoms are in 14 moles of cadmium.

Explanation:

Cadmium is a white and  silvery  metal  that is found in the curst of the earth.During the  production process of metals such as lead, copper, zinc, cadmium is extracted

Cadmium is present in some foods and is emitted when fossil fuels like as coal and oil is used, smoking cigarettes. It is used in craft glazes, metal batteries, and coatings.

We know that 1 mole of  Cadmium (Cd contains) 6.023*1023 atoms, which is Avogadro's number.

So in 14 Grams of Cadmium, the number of atoms present is,

=>14×number atoms present in one cadmium atom

=>[tex]14\times 6.023\times10^{23}[/tex]

=>[tex]8.4322\times10^{24} atoms[/tex]

The number of atoms of Cadmium present in 14 moles is 84.322  [tex]\rm \bold{\times\;10^2^3}[/tex] atoms.

The number of atoms in a mole of compounds can be given by the Avagadro number. The Avagadro number has been equal to 6.023 [tex]\rm \bold{\times\;10^2^3}[/tex]

Thus, 1 mole =  6.023 [tex]\rm \bold{\times\;10^2^3}[/tex] atoms

The given element has been Cadmium. The moles of Cadmium is 14 moles.

By simplifying with unitary method:

1 mole =  6.023 [tex]\rm \bold{\times\;10^2^3}[/tex] atoms

14 moles = [tex]\rm \dfrac{6.023\;\times\;10^2^3}{1}\;\times\;14[/tex] atoms

14 moles of Cadmium = 84.322 [tex]\rm \bold{\times\;10^2^3}[/tex] atoms.

The number of atoms of Cadmium present in 14 moles is 84.322  [tex]\rm \bold{\times\;10^2^3}[/tex] atoms.

For more information about atoms in a mole, refer to the link:

https://brainly.com/question/6683218

Answer:

The correct answer is c they are specialized.

Explanation:

Human body contain various types of cells and each specific type of cell performs specific functions.

  For example nerve cells help in propagation of action potential from one neuron to the next.

    Heart cells of our body act as a pump.Basically heart cells pump blood.

    Blood cells helps in transport of various biomolecules and fight against invaded pathogens.

  Lung cells helps in the exchange of oxygen and carbon dioxide gas to and from our body.

  kidney cells helps in the filtration of blood and formation of urine

Answer:                 (C They are specialized

Explanation:

Answer:The number of mole in the compounds are:

A. 6.60 g of (NH₄)₂SO₄ contains 0.05 mole.

B. 4.5 kg Ca(OH)₂ contains 60.81 moles

The mole of a substance is related to its mass and molar mass according to the equation:

With the above formula, we can obtain the answer to the questions given above. This is illustrated below:

A. Determination of the number of mole in  6.60 g of (NH₄)₂SO₄

Molar mass of (NH₄)₂SO₄ = 2[14 + (4×1)] + 32 + (4×16)

= 2[14 + 4] + 32 + 64

= 2[18] + 32 + 64

= 36 + 32 + 64

= 132 g/mol

Mass of NH₄)₂SO₄ = 6.60 g

Mole of NH₄)₂SO₄ =?

Mole of NH₄)₂SO₄ =

Mole of NH₄)₂SO₄ = 0.05 mole

Thus, 6.60 g of (NH₄)₂SO₄ contains 0.05 mole.

B. Determination of the number of mole in 4.5 kg Ca(OH)₂

Molar mass of Ca(OH)₂ = 40 + 2(16 + 1)

= 40 + 2(17)

= 40 + 34

= 74 g/mol

Mass of Ca(OH)₂ = 4.5 kg

= 4.5 × 1000

= 4500 g

Mole of Ca(OH)₂ =?

Mole of Ca(OH)₂ =

Mole of Ca(OH)₂ = 60.81 moles

Thus, 4.5 kg Ca(OH)₂ contains 60.81 moles

Learn more: brainly.com/question/17201079

Answer:

The  volume (in ml) of a 3.57 M solution of [tex]ZnBr_2[/tex] that contains 0.884 moles of  [tex]ZnBr_2[/tex] is 247.61g mL

Explanation:

According to the definition of Molarity

which sates

"The amount of moles of a substance present in one litre of the solution is called as Molarity."

3.57M [tex]ZnBr_2[/tex] solution implies that 1000 mL of the solution conatins 3.57Moles of [tex]ZnBr_2[/tex]

Hence , 3.57 moles of [tex]ZnBr_2[/tex] is present in the 1000 ml of solution

Now,

In 1 mole of [tex]ZnBr_2[/tex] is  present in the =[tex]\frac{1000}{3.57}[/tex]ml of solution

Similarily ,

In 0.884  moles of[tex]ZnBr_2[/tex] is  present in the [tex]\frac{1000\times 0.884}{3.57}[/tex] of solution= 247.61g mL

Iodine-131 has a shorter half-life than cobalt-60.

We are given;

We are supposed to explain the difference between the two instances;

We need to define half life;