Engineering Middle School

If you embed a multimedia file, you reduce the bandwidth your Web site must manage.
A. True
B. False

Answers

Answer 1
The answer is true hope this helps
Answer 2
The correct answer is true

Related Questions

2. When entering a vehicle from the street side,
you should
(a) be ready to unlock the door.
(b) walk around the front of the vehicle
toward the back.
(c) get in quickly, then close and lock the door.
(d) all of the above

Answers

Answer:

D

Explanation:

we all do all of the above

D because staying safe especially on the street side will have great effects because

3. When starting an automatic transmission
vehicle, the selector lever should be in
(a) LOW-L1 or L2, (c) PARK-P or
or 1 or 2
NEUTRAL-N
(b) DRIVE-D
(d) REVERSE-R

Answers

It should be in NEUTRAL-N

1. Which of the following is not found on a
vehicle's instrument panel?
(a) speedometer
(c) tachometer
(b) horn
(d) fuel gauge

Answers

Answer:

tachometer

Explanation:

in all the cars ever produced non has never had tachometer in the car instrument panel

The answer is most likely c .!

4. The friction point is the point
(a) where the vehicle starts to move.
(b) where you feel the engine turn off.
(c) when you suddenly release the clutch.
(d) none of the above

Answers

Final answer:

The friction point is where the vehicle starts to move, marking a crucial moment in manual transmission operation where the engine's power begins transferring to the wheels, overcoming static friction.

Explanation:

The question asking about the friction point in the context of vehicle movement pertains to a scenario in driving where precise control of the vehicle's clutch is necessary. The friction point is correctly defined as (a) where the vehicle starts to move. This is because the friction point refers to the moment in the process of engaging the clutch where the engine's power begins to transfer to the wheels, overcoming static friction, and causing the vehicle to start moving. This is a crucial concept in understanding vehicle dynamics and manual transmission operation.

Understanding the friction point is integral to smooth driving and preventing the engine from stalling. It requires a delicate balance between the clutch and the accelerator, which, when mastered, allows for fluid movement from a stationary position. This concept is an essential part of learning to drive, especially for manual transmission vehicles, where the driver manually controls the clutch engagement.

True or False: Galvanized steel pipe can withstand moderate freezing.

Answers

Answer:

True

Explanation:

Older galvanized steel pipes, which have a tendency to freeze, are a bit more forgiving and will likely not burst. They can withstand extreme cold and warm temperatures.

True hope this helps

What invention would you argue most impacted mechanical engineering

Answers

Final answer:

The steam engine significantly impacted mechanical engineering by revolutionizing transportation and production processes.

Explanation:

The steam engine is arguably the most impactful invention on mechanical engineering due to its role in revolutionizing transportation and production processes. This invention by James Watt transformed the way goods were manufactured and significantly contributed to the Industrial Revolution.

We are used to connect the external devices and power supply to a computer. My anagram is torps

Answers

Answer: Ports  

Explanation:

Ports are the devices tat is used for connection of input devices and output devices wit computer.Te links created by ports between peripheral and computing system connects devices such as monitors, keyboard,modems , printer speaker s etc.  

External devices get plugged into ports which are embedded on motherboard of the computing system to establish peripheral connection.

Turning a screw with a screwdriver pushes the screw into the wood. The force is __________ over many turns

Answers

Answer:

repeated?

Explanation:

not really sure what type of answer choices you have

Repeated over many times because it spin and spin and spin and spin and spin

4. The outer end of a control arm is attached to the steering knuckle through a
A bushing
B. spring
ec ball joint
D. tie rod end

Answers

A) I think it's A I think ithink

Select the correct answer from each drop down menu.

What does Hooke’s Law explain ?

If the external force is larger than the
(1.)size
(2.)volume
(3.)elastic limit
of material, it may result in permanent deformation in the shape and size of the object. This characteristic is known as the
(4.)material behavior
(5.)elastic behavior
(6.)plastic behavior
of an object.

Answers

Hooke's Law is a principle of physics that states that the that the force needed to extend or compress a spring by some distance is proportional to that distance.

volume, plastic behavior .

Answer:

The first drop down menu is elastic limit and the second one is plastic behavior.

Explanation:

Who is responsible for conducting a hazard assessment?
Select the best option.
Employee
Employer

Answers

The employer not the employee
Other Questions
What were some of the geographic and economic benefits of the Mexican cession In the trapezoid, what is the measure of 1? 8511590 Use this information to answer questions 6 - 11. Your original population of200 was hit by a tidal wave and 100 organisms were killed, leaving 36homozygous recessive out of the 100 survivors. If we assume that allindividuals were equally likely to be wiped out, how did the tidal waveaffect the predicted frequencies of the alleles in the population? Assumethe new population is at equilibrium after the event, so you are comparingtwo populations that are at equilibrium to look for changes in allelefrequencies. what is the frequency of the recessivr allele A baker uses the expression 3.25c+5.75p to calculate his profit when he sells c cakes and p pies. What is the bakers profit, in dollars, when he sells 10 cakes and 15 pies? What is the answer ? Families USA, a monthly magazine that discusses issues related to health and health costs, surveyed 20 of its subscribers. It found that the annual health insurance premiums for a family with coverage through an employer averaged $10,979. The standard deviation of the sample was $1,000.a. Based on this sample information, develop a 90 percent confidence interval for thepopulation mean yearly premium.b. How large a sample is needed to find the population mean within $250 at 99 percentconfidence? A man travels to a foreign country and smuggles a pair of exotic snakes (one male and one female) back into his country of origin. Fearing that he will be arrested by the police, he releases the snakes into the wild. How will this action most likely affect his local ecosystem? A. There will be a reduction in the native snake population as they compete for resources with the exotic snakes. B. The addition of the exotic snakes will have no effect on the local ecosystem. C. The exotic snakes will become sterile and not be able to reproduce since they are not in their native environment. D. There will be an increase in the number of mice in the local ecosystem in order to provide more food for the snake populations. The total momentum of two marbles before a collision is .06 kgm/s. No outside forces act on the marbles. What is the total momentum of the marbles after the collision? The temperature at a point (x, y) on a flat metal plate is given by T(x, y) = 31/(3 + x^2 + y^2), where T is measured in C and x, y in meters. (a) Find the rate of change of temperature with respect to distance at the point (3, 9) in the x- direction.(b) Find the rate of change of temperature with respect to distance at the point (3, 9) in the y- direction. Raj paints 10 3/7 feet of his fence on Friday and 15 1/3 feet of his fence on Saturday.How many feet of his fence did Raj paint on both days? Kel has 6 nickels, 2 dimes and 4 quarters in his pocket. What is the likelihood that Kel will choose a nickel from his pocket?A. impossibleB. likelyC. as likely as notD. certain If f(x) = 3[ x-2], what is f(5.9) If [infinity] cn8n n = 0 is convergent, can we conclude that each of the following series is convergent? (a) [infinity] cn(3)n n = 0 When compared to the original series, [infinity] cnxn n = 0 , we see that x = here. Since the original for that particular value of x, we know that this . (b) [infinity] cn(8)n n = 0 When compared to the original series, [infinity] cnxn n = 0 , we see that x = here. Since the original for that particular value of x, we know that this Introduction: Match each word or term with its correct definitionNationalizeTo bring an economic industry under thecontrol of a national governmentRetractedSecretive, not recognizedCovertTo withdraw or pull backMujahideenWar instigated by another countrythat does not participate in the warProxy warMuslim guerilla warriors Excerpt from Is Grammar Important?Carole Jenkins(18) You are probably wondering how all of the rules and their exceptions will be remembered by you.What is the BEST way, if any, to rewrite Sentence (18)?A)Leave as is.B)You are probably wondering how all of the rules and their exceptions you will ever learn.C)How you will ever learn and remember all of the rules and their exceptions you are probably wondering.D)You are probably wondering how you will ever learn and remember all of the rules and their exceptions. Keynes' law isSelect all that apply:a. the opposite of Say's lawb. the same as Say's lawc. consistent with the statement that supply creates demandd. described by the statement that a lack of demand in the economy as a whole leads to inadequate incentives for firms to produce If the world price of textiles is higher than Vietnams domestic price of textiles without trade, then Vietnam Select one: a. has a comparative advantage in textiles. b. should produce just enough textiles to meet its domestic demand. c. should import textiles. d. should refrain altogether from producing textiles. Ac is tangent to circle o at point c what is the length of ac? 35% off $85.98 I'm having trouble with this. What does the first map reveal about the boundaries between Europe nations in 1715?