If you have 65.8 grams NH3, how many grams of F2 are required for complete reaction?

Answer:

precise meaning in mathematics than the way it is often used in science. ... gradient at any point along the line is the same. For a curve ... Many graphs have 'time' as the variable on the horizontal axis, and indeed the language that ... represents the relationship between the volume of a fixed mass of gas and its temperature.

Explanation:

Answer:

Add excess copper carbonate to hydrochloric acid in a beaker, stirring until there is no further reaction. Filter the mixture to remove the remaining copper carbonate, then heat the remaining solution to the point of crystallisation. Leave the solution to cool and collect the crystals formed by filtration.

Explanation:

Answer:

CHICKEN

Explanation:

EGG

LEG

PIC

Answer:

Therefore having the bodies closer together increases the potential energy stored, and conversely increasing their distance reduces the potential energy. In this case the potential energy is always positive, again dropping to zero as the force decreases to zero with the bodies very far apart.

Explanation:

Answer:

A. How well a current will flow in a material and it's measured in volts.

The method not involved in recording climate data is identifying phosphorus levels in fossils. Climate scientists commonly use ice cores, pollen analysis, and dendrochronology to understand past climate conditions.

So, the correct answer is C. Identifying phosphorus levels in fossils.

The option that is NOT involved in recording climate data is indentifying phosphorus levels in fossils. Phosphorus levels in fossils are typically not used to record historical climate data. Instead, they may be more relevant in studies of biogeochemical cycles or ancient ecosystems.

Climate scientists use various methods to reconstruct past climates, known as proxy data. Some of the common proxies include:

Each of these methods contributes to the understanding of Earth's climate history and changes over time.

So, the correct answer is C. Identifying phosphorus levels in fossils.

Final answer:

Identifying phosphorus levels in fossils is NOT involved in recording climate data. Tree rings, ice cores, and pollen analysis are used to study past climates. Phosphorus levels give geochemical information not directly related to climate.

Explanation:

Of the options provided, the one that is NOT involved in recording climate data is C. Identifying phosphorus levels in fossils. The other options, like investigating air bubbles trapped in ice cores, analyzing species of pollen, and studying tree rings, are all common proxy methods used by scientists to reconstruct past climates. Phosphorus levels in fossils generally provide information related to the geochemistry of the environments where the organisms lived, rather than direct climate data.

Both tree rings and ice cores are essential proxies in paleoclimatology. Tree rings provide annual records that can be used to infer temperature and precipitation patterns, while ice cores can reveal atmospheric composition and temperature data over longer time periods. Pollen analysis helps in reconstructing past vegetation and therefore, the climate that supported such vegetation.

Panting after exercise reduces carbon dioxide levels in the blood, decreasing carbonic acid and helping restore pH balance. At higher altitudes, lower pressure reduces blood's capacity to hold CO₂, potentially leading to decreased carbonic acid concentration but also complicating the body's regulatory mechanisms. Direct dissolution of CO₂ in the blood is also affected by lower pressure.

Effects of Panting and Altitude on Carbonic Acid Concentration:

Panting after heavy exercise increases the expulsion of carbon dioxide, which in turn decreases the concentration of carbonic acid in the blood. This process reestablishes the pH balance, reducing the risk of acidosis caused by the buildup of lactic acid and carbonic acid during strenuous activity. Furthermore, hiking to a higher altitude, where the pressure is lower, would reduce the ability of blood to hold carbon dioxide. This reduction leads to faster removal of carbon dioxide from the blood, which would tend to decrease carbonic acid concentration. However, due to reduced oxygen availability and potential respiratory adjustments such as hyperventilation, the effect on blood pH can be complex at high altitudes.

Lower pressure at high altitudes also affects the direct dissolution of carbon dioxide (CO₂) in blood. At lower pressures, less CO₂ can be dissolved directly, which might necessitate increased respiratory rates to compensate for the reduced ability to carry carbon dioxide away from tissues. Overall, both mechanisms work to ensure the body can maintain a stable internal environment, particularly during varying physical demands and environmental conditions.

Answer: The new volume is 2.4 L

Explanation:

Combined gas law is the combination of Boyle's law, Charles's law and Gay-Lussac's law.

The combined gas equation is,

[tex]\frac{P_1V_1}{T_1}=\frac{P_2V_2}{T_2}[/tex]

where,

[tex]P_1[/tex] = initial pressure of gas = 150 kPa

[tex]P_2[/tex] = final pressure of gas =  101 kPa (at STP)

[tex]V_1[/tex] = initial volume of gas = 1.5 L

[tex]V_2[/tex] = final volume of gas = ?

[tex]T_1[/tex] = initial temperature of gas = 250 K

[tex]T_2[/tex] = final temperature of gas = 273 K ( at STP)

Now put all the given values in the above equation, we get:

[tex]\frac{150\times 1.5}{250}=\frac{101\times V_2}{273}[/tex]

[tex]V_2=2.4L[/tex]

Thus the new volume is 2.4 L

To find the new volume at STP, the combined gas law is used. The initial conditions (150kPa, 1.5L, and 250K) are set equal to the final conditions at STP (101.3kPa, V2, and 273K), then solved for V2 to get the new volume in liters which is 2.42L.

To determine the new volume of the gas at standard temperature and pressure (STP), we can use the combined gas law which states that the ratio of the product of pressure and volume and the absolute temperature of a gas is constant, provided the amount of gas remains constant. For the 1.5L sample of a gas at 150kPa and 250K when changed to STP, we assume the STP conditions to be 0°C (or 273K) and 101.3kPa.

First, we convert the initial pressure to kPa if it is not already, and we confirm that the initial temperature is in Kelvin. Then we can plug our known values into the formula:

P1 * V1 / T1 = P2 * V2 / T2

Where P1 and V1 are the initial pressure and volume, T1 is the initial temperature, P2 and V2 are the final pressure and volume, and T2 is the final temperature at STP.

In this case, we have:

150kPa * 1.5L / 250K = 101.3kPa * V2 / 273K

When we solve for V2, we get:

V2 = (150kPa * 1.5L / 250K) * 273K / 101.3kPa

V2= 2.42L

Performing the calculation we get the new volume of the gas at STP which is 2.42L.

Answer: Thus the volume of the container that the gas is in 2311 L

Explanation:

According to ideal gas equation:

[tex]PV=nRT[/tex]

P = pressure of gas = 0.09 atm

V = Volume of gas = Volume of container = ?

n = number of moles = 7.7

R = gas constant =[tex]0.0821Latm/Kmol[/tex]

T =temperature =[tex]56^0C=(56+273)K=329K[/tex]

[tex]V=\frac{nRT}{P}[/tex]

[tex]V=\frac{7.7mol\times 0.0821Latm/K mol\times 329K}{0.09atm}=2311L[/tex]

Thus the volume of the container that the gas is in 2311 L

Answer:

.25

Explanation:

H+=10^-pH

- Hope that helps! Please let me know if you need further explanation.

Answer:

What is the [H3O+] in a solution of pH 0.60?  

Explanation:

No cap

Answer:

Coal

Explanation:

Once it's all been mined, there's no more. It's not like we grow it.

Answer:

47.5603392 grams

Explanation:

Answer:

The answer is all of the above

A) Center of the solar system

B) hot

C) sunburn

D) solar energy

E) star

F) source of energy for life

G) solar radiation

The study of stars and planets is called cosmology.

The correct answer is all of them.

Sun is the celestial body that gives us the energy to make all the things on the earth.

All the option is justified as follows:-

Hence, the correct option is all of them.

For more information, refer to the link:-

https://brainly.com/question/19200238

Answer:

Hafnium

Explanation:

I'm guessing based on the sound of the name, because hafnium kind of sounds like the word half, or 50%. Hope this helps!

Answer:

Hafnium

Explanation:

Answer:

C. a patch of Densely polluted water the size of Texas in the Pacific ocean

Explanation:

All of the Answers are Correct but this describes the Size, location, and the harshness of it.

Answer:

c

Explanation:

The pressure system in the area would likely change due to the introduction of clouds from a different direction.

Clear skies in a high-pressure system occur because descending air inhibits cloud formation; cloud movement suggests a different air mass.

Arrival of a cloudy air mass can disrupt the existing high-pressure system by weakening it.

The high-pressure system might shift position, moving away or being displaced by the incoming low-pressure system.

Persistence of the high-pressure system depends on its strength and reinforcement by other atmospheric conditions; clouds may be temporary.

Interaction between high and low pressure can form a frontal boundary, triggering weather changes like precipitation.

Cloud introduction from another direction indicates a weather pattern change, affecting the area's pressure system.

Outcome varies based on the strengths and characteristics of both pressure systems and the associated air masses.

Answer:

Groundwater pollution

Explanation:

Pesticides, when sprayed on crop plants, are able to flow below the surface of the ground, reaching water-bearing aquifers, thereby contaminating groundwater, making it unsuitable for both human and agricultural uses.

Final answer:

The type of water pollution produced from chemicals used to kill bugs and weeds is due to pesticides, including insecticides and herbicides, which contaminate water bodies through runoff and leaching into groundwater.

Explanation:

The type of water pollution produced from chemicals used to kill bugs and weeds is primarily due to pesticides, which include insecticides, herbicides, and fungicides. These chemicals often run off during rainfall into nearby rivers, lakes, and infiltrate into groundwater, creating a significant environmental concern. Contaminated water can cause an overgrowth of water plants and algae, which in turn, results in dead zones. Moreover, if humans consume water contaminated with these substances, they can fall ill from a variety of health issues, including cancer, damage to the central nervous system, and developmental defects. Therefore, the chemicals from pesticides and herbicides used in agricultural and garden applications significantly contribute to water pollution.

Answer:

The new pressure will be 74.8 kPa

Explanation:

Step 1: Data given

Volume of the N2 gas = 500 mL = 0.500 L

Temperature = 10.0 °C = 283 K

Pressure = 108 kPa

The volume is increased to 750 mL = 0.750 L

The temperature is increased to 21.0 °C = 294 K

Step 2: Calculate the new pressure

P1*V1 / T1 = P2*V2 / T2

⇒with P1 = the initial pressure = 108 kPa

⇒with V1 = the initial volume = 0.500 L

⇒with T1 = the initial temperature = 283 K

⇒with P2 = the new pressure = TO BE DETERMINED

⇒with V2 = the increased volume = 0.750 L

⇒ with T2 = the increased temperature = 294 K

108 * 0.500 / 283 = P2 * 0.750 / 294

P2 = (108*0.500 * 294) / (283*0.750)

P2 = 74.8 kPa

The new pressure will be 74.8 kPa

Answer:

I would guess B, because trees make oxygen, not carbon dioxcide, and coal is actually a very harmful source of energy.

hope this helps

Explanation:

Final answer:

To slow climate change, it is crucial to reduce energy use, switch to alternative energy sources like solar and wind, and enhance carbon sinks by planting forests.

Explanation:

To slow down climate change, we should focus on several key actions. First, we need to reduce energy use, which could include measures like turning off lights when not in use and driving more fuel-efficient cars. These steps help because much of the electricity and transportation relies on burning fossil fuels, which releases large amounts of carbon dioxide.

Another important action is to switch to cleaner alternative energy sources, such as solar, wind, and geothermal energy. These sources produce little to no carbon emissions compared to fossil fuels like coal, oil, and natural gas. Additionally, increasing the use of technologies like hybrid cars can drastically reduce air pollution and fossil fuel consumption. Moreover, we can combat climate change by enhancing carbon sinks, such as planting more forests which absorb carbon dioxide from the atmosphere.

Answer:

The final volume is 1.6 L.

Explanation:

It is given that,

A diver has a lung capacity of 2.4 L when the pressure is 0.8 atm. We need to find the volume of the diver’s lungs when the pressure changes to 1.2 atm. Let V₂ is volume.

It is based on Boyle's law. According to this law,

[tex]PV=K[/tex]

K is constant

[tex]P_1V_1=P_2V_2[/tex]

[tex]V_2=\dfrac{P_1V_1}{P_2}\\\\V_2=\dfrac{0.8\times 2.4}{1.2}\\\\V_2=1.6\ L[/tex]

So, the final volume is 1.6 L.

Final answer:

A number placed in front of a compound or an element in a chemical equation, such as 13 in front of oxygen, is a coefficient that indicates the number of molecules present, meaning there are 13 oxygen molecules in the reactants.

Explanation:

When you see a number placed in front of a compound or an element in a chemical equation, such as the number 13 placed in front of oxygen, this number is referred to as a coefficient. Coefficients are used in chemical equations to indicate the number of molecules or atoms involved in the reaction. Unlike subscripts, which denote the number of atoms of an element within a molecule, coefficients tell us how many units of a molecule or an elemental atom are present. Therefore, if we see a 13 in front of oxygen in a chemical equation, it indicates the presence of 13 oxygen molecules. This means that the correct answer is "C) It is a coefficient representing that there are 13 oxygen molecules in the reactants".

Answer:

A. A whole number that appears in front of a compound or element in a balanced chemical equation.  

Explanation:

That's the definition of a coefficient.

B, C, and D are wrong. Subscripts are not coefficients.

Answer:

Introduced species (invasive species)

Answer:

The atomic number

Explanation:

Transmutation refers to the conversion of one chemical element into another. A transmutation usually involves a change in the structure of atomic nuclei and this may be induced by a nuclear reaction.

Transmutation was first achieved in 1919 by Lord Rutherford when he successfully changed a nitrogen nucleus to an oxygen-18 isotope, producing a proton in the process.

Since transmutation often involves changing one atom into another, the atomic number or mass number of the original element always changes (to form a new element) in the process.

Answer:

0.000032 mol/l

Explanation:

A solution that has a higher concentration of hydrogen ions than water is known as an acidic solution and basic or alkaline solutions have a lower concentration of hydrogen ions than water.

The nucleus of a hydrogen atom separated from its electron is known as a hydrogen ion.

pH of an acidic solution (n) = 4.50

Hydroxide ion concentration of an acidic solution = [tex]10^{-n}=10^{-4.50}=0.000032\,\,mol\,/\,l[/tex]

Answer:6.0M

Explanation:see attached photo

The concentration of the stock HCl solution used to prepare 150.0 mL of 1.40 M HCl from 35.0 mL of the stock solution is 6.00 M.

To find the concentration of the stock solution of HCl used to prepare a diluted solution, we can use the dilution equation MiVi = MfVf, where Mi and Vi are the concentration and volume of the initial stock solution, and Mf and Vf are the concentration and volume of the final diluted solution.

In this case, the student has prepared 150.0 mL of 1.40 M HCl by diluting 35.0 mL of a stock solution. To find the concentration of the stock solution (Mi), we rearrange the equation to solve for Mi:

Mi = (MfVf) / Vi

Substituting the given values:

Mi = (1.40 M × 150.0 mL) / 35.0 mL

Mi = (210.0 × mL) / 35.0 mL

Mi = 6.00 M

Therefore, the concentration of the stock HCl solution is 6.00 M.

When the same force is applied to two objects with different masses, the object with the smaller mass will experience a greater acceleration.

This is in accordance with Newton's second law of motion, which states that acceleration is inversely proportional to mass when force is constant.

Less massive objects accelerate more easily in response to a given force, while more massive objects require a greater force to achieve the same acceleration.

Read more on acceleration here https://brainly.com/question/460763

#SPJ3

The object with the smaller mass will have the greater acceleration.

According to Newton's second law of motion, the acceleration of an object is directly proportional to the net force applied to it and inversely proportional to its  mass. This relationship is given by the equation:

[tex]\[ a = \frac{F}{m} \][/tex]

where [tex]a[/tex] is the acceleration, [tex]F[/tex] is the force applied, and [tex]m[/tex] is the mass of the object.

 Given that the same force [tex]F[/tex] is applied to two different objects, the acceleration [tex]\( a \)[/tex] of each object will depend on its mass [tex]\( m \).[/tex] If we denote the force as \( F \), and the masses of the two objects as [tex]\( m_1 \) and \( m_2 \),[/tex] with [tex]\( m_1 < m_2 \)[/tex], the accelerations [tex]\( a_1 \) and \( a_2 \)[/tex] can be calculated as:

[tex]\[ a_1 = \frac{F}{m_1} \][/tex]

[tex]\[ a_2 = \frac{F}{m_2} \][/tex]

Since [tex]\( m_1 < m_2 \)[/tex], the fraction [tex]\( \frac{F}{m_1} \)[/tex] will be greater than [tex]\( \frac{F}{m_2} \),[/tex]which means that \[tex]( a_1 > a_2 \).[/tex]

Therefore, the object with the smaller mass [tex]\( m_1 \)[/tex] will have the greater acceleration [tex]\( a_1 \)[/tex] when the same force [tex]\( F \)[/tex] is applied to both objects.

This conclusion is consistent with the inverse relationship between mass and acceleration as described by Newton's second law.

Answer:

A

Explanation:

First, we're given that the atmospheric pressure is 744.8 mmHg. However, this includes the pressure of the Zinc and the pressure of the water; we only want the pressure of the water, so subtract its pressures (23.8 mmHg) from 744.8 mmHg: 744.8 - 23.8 = 721 mmHg.

Now, we can use the ideal gas law: PV = nRT.

- the pressure P is 721 mmHg

- the volume V is 7.80 L

- the moles n of Zinc is what we want to find in order to calculate the mass

- the gas constant R is 62.36 L mmHg / (mol K)

- the temperature T is 25.0°C, or 25.0 + 273 = 298 K

Plug all these in:

PV = nRT

(721 mmHg) * (7.80 L) = n * (62.36) * (298 K)

n ≈ 0.303 mol Zn

We need to convert this to grams, so use the molar mass of Zinc, which is 65.38 g/mol:

[tex]0.303molZn*\frac{65.38g}{1mol} =19.8gZn[/tex]

Thus, the answer is A.

The answer to this problem is A!

Answer:

All objectives are correct but C is most suitable

Explanation:

All objectives A, B, and D can be shown in bonding arrangement which is not the case for C.

For example, complex compounds like

Sodium aluminate NaAl(OH)

Answer:

D.1 proton and 1 neutron is the correct answer    

Explanation: