Answer: linear velocity = 169,745.2mi/hr
Explanation:
Given: radius of orbit= 2,600,000mi
Time taken for orbit = 4.01 days = 4.01 × 24 hrs= 96.24hrs
Linear velocity = distance travelled/time
distance travelled = circumference of orbit = 2πr
= 2π × 2,600,000mi
= 16336281.8mi
Linear velocity = 16336281.8/ 96.24hrs
= 169745.2mi/hr
A wind turbine is initially spinning at a constant angular speed. As the wind's strength gradually increases, the turbine experiences a constant angular acceleration of . After making 2870 revolutions, its angular speed is 133 rad/s. (a) What is the initial angular velocity of the turbine? (b) How much time elapses while the turbine is speeding up?
:Answer:
a. the initial angular velocity = 166.5rad/s
b. t= 135.7seconds
Explanation:
a. v = rw
angular velocity for 2870 rev, w = (2πN)/60 =2*3.142*2870rev)/60 =300.5rad/sec
w₁-w₂ = 300.5 - 133= 166.5rad/s
the initial angular velocity = 166.5rad/s
acceleration = change in velocity / time
b. 1 revolution = 2π
1 rad = 0.159rev
? = 2870 rev
=2870*1)/0.159 = 18050.3rad
the final angular speed = rev/time = rad/time
133 rad/s = 18050.3/t
133t = 18050.3
t= 135.7seconds
Small blocks, each with mass m, are clamped at the ends and at the center of a rod of length L and negligible mass. Compute the moment of inertia of the system about an axis perpendicular to the rod and passing through (a) the center of the rod and (b) a point one-fourth of the length from one end
Answer:
Answered
Explanation:
a) Two balls are at a distance of L/2 from the axis of rotation and one block at the center. ( center of rod).
therefore,
[tex]I=2\times m\frac{L}{2}^2[/tex]
[tex]I= \frac{1}{2}mL^2[/tex]
b) two balls at a distance L/4 at the from the axis and 1 ball at a distance 3L/4 from the from the axis.
[tex]I= 2\times m\times(L/4)^2 + m(\frac{3L}{4})^2[/tex]
= [tex]\frac{1}{16} mL^2(2+9)= \frac{11}{16}mL^2[/tex]
The moment of inertia of the system about an axis perpendicular to the rod and passing through the center of the rod is 1/2mL².
How to calculate the moment of inertia?It should be noted that the moment of inertia of the system about an axis perpendicular to the rod and passing through the center of the rod will be calculated thus:
I = 1/2 × mL²/2
I = 1/2mL²
Also, the moment of inertia of the system about an axis perpendicular to the rod and passing through a point one-fourth of the length from one end will be:
I = 2 × m × (L/4)² + m(3L/4)²
I = (2 + 9)1/16mL²
I = 11/16mL²
Learn more about inertia on:
https://brainly.com/question/1140506
A motor drives a disk initially at rest through 25.9 rotations in 5.0 s. Assume the vector sum of the torques caused by the force exerted by the motor and the force of friction is constant. The rotational inertia of the disk is 4.0 kg⋅m2. When the motor is switched off, the disk comes to rest in 12 s.
A.)What is the magnitude of torque created by the force of friction?
B.)What is the magnitude of torque caused by the force exerted by the motor?
Answer
given,
rotation of disk is equal to(θ) = 25.9
time taken = 5 s
moment of inertia of disk = 4 Kg.m²
disk come to rest in = 12 sec
a) θ = 2 π x 25.9
θ = 162.73 rad
using equation of rotational motion
θ = ω₀t + 0.5 α t²
162.79 = 0 + 0.5 x α x 5²
α = 13.02 rad/s²
total torque acting
[tex]\tau_{frictional} + \tau_{rotational} = I \alpha[/tex]
[tex]\tau_{frictional} + \tau_{rotational} = 4\times 13.02[/tex]
[tex]\tau_{frictional} + \tau_{rotational} =52.08[/tex]
again using the rotational equation
[tex]\omega_f - \omega_i = \alpha\ t[/tex]
[tex]\omega_f -0 = 13.02 \times 5[/tex]
[tex]\omega_f = 65.1\ rad/s[/tex]
when only friction is acting angular acceleration
[tex]\omega_f - \omega_i = \alpha\ t[/tex]
[tex]0 -65.1 =\alpha\ 12[/tex]
[tex]\alpha= -5.425\ rad/s^2[/tex]
now torque due to friction
[tex]\tau_{frictional} =- 4 \times 5.425[/tex]
[tex]\tau_{frictional} =-21.7\ Nm[/tex]
now,
[tex]-21.7+ \tau_{rotational} =52.08[/tex]
[tex] \tau_{rotational} =73.78\ Nm[/tex]
Consider a blackbody that radiates with an intensity i1 at a room temperature of 300k. At what intensity i2 will this blackbody radiate when it is at a temperature of 400k?
Answer:
3.16 i1
Explanation:
T1 = 300 k
I1 = i1
T2 = 400 k
i2 = ?
The intensity is directly proportional to the four powers of the absolute temperature.
I ∝ T^4
So, [tex]\frac{i_{2}}{i_{1}}=\frac{T_{2}^{4}}{T_{1}^{4}}[/tex]
[tex]\frac{i_{2}}{i_{1}}=\frac{400^{4}}{300^{4}}[/tex]
i2 = 3.16 i1
Thus, the intensity becomes 3.16 i1.
A block with mass m = 7.4 kg is attached to two springs with spring constants kleft = 31 N/m and kright = 53 N/m. The block is pulled a distance x = 0.27 m to the left of its equilibrium position and released from rest.
1)What is the magnitude of the net force on the block (the moment it is released)?
N
2)What is the effective spring constant of the two springs?
N/m
3)What is the period of oscillation of the block?
s
4)How long does it take the block to return to equilibrium for the first time?
s
5)What is the speed of the block as it passes through the equilibrium position?
m/s
6)What is the magnitude of the acceleration of the block as it passes through equilibrium?
m/s2
7)Where is the block located, relative to equilibrium, at a time 1.06 s after it is released? (if the block is left of equilibrium give the answer as a negative value; if the block is right of equilibrium give the answer as a positive value)
m
8)What is the net force on the block at this time 1.06 s? (a negative force is to the left; a positive force is to the right)
N
9)What is the total energy stored in the system?
J
10)If the block had been given an initial push, how would the period of oscillation change?
the period would increase
the period would decrease
the period would not change
I need help with this question please
The correct answers are as follows:
1) The magnitude of the net force on the block at the moment it is released is given by Hooke's Law for springs in parallel, which states that the net force is the sum of the forces exerted by each spring. Since the block is pulled to the left, the force exerted by the left spring is to the right, and the force exerted by the right spring is to the left. Thus, the net force[tex]\( F \)[/tex] is:
[tex]\[ F = k_{\text{left}} \cdot x + k_{\text{right}} \cdot x \] \[ F = (31 \, \text{N/m} + 53 \, \text{N/m}) \cdot 0.27 \, \text{m} \] \[ F = 84 \, \text{N/m} \cdot 0.27 \, \text{m} \] \[ F = 22.68 \, \text{N} \][/tex]2) The effective spring constant [tex]\( k_{\text{eff}} \)[/tex] of the two springs in parallel is the sum of the individual spring constants:
[tex]\[ k_{\text{eff}} = k_{\text{left}} + k_{\text{right}} \] \[ k_{\text{eff}} = 31 \, \text{N/m} + 53 \, \text{N/m} \] \[ k_{\text{eff}} = 84 \, \text{N/m} \][/tex]
3) The period of oscillation [tex]\( T \)[/tex] for a mass-spring system is given by:
[tex]\[ T = 2\pi \sqrt{\frac{m}{k_{\text{eff}}}} \] \[ T = 2\pi \sqrt{\frac{7.4 \, \text{kg}}{84 \, \text{N/m}}} \] \[ T = 2\pi \sqrt{\frac{7.4}{84}} \] \[ T = 2\pi \sqrt{0.0881} \] \[ T = 2\pi \cdot 0.2968 \] \[ T \approx 1.86 \, \text{s} \][/tex]
4) The time it takes for the block to return to equilibrium for the first time is half of the period of oscillation:
[tex]\[ t = \frac{T}{2} \] \[ t = \frac{1.86 \, \text{s}}{2} \] \[ t \approx 0.93 \, \text{s} \][/tex]
5) The speed of the block as it passes through the equilibrium position can be found using the conservation of energy. The total mechanical energy is constant, so the potential energy at the release point is converted into kinetic energy at the equilibrium position:
[tex]\[ \frac{1}{2} k_{\text{eff}} x^2 = \frac{1}{2} m v^2 \] \[ k_{\text{eff}} x^2 = m v^2 \] \[ v^2 = \frac{k_{\text{eff}} x^2}{m} \] \[ v = \sqrt{\frac{k_{\text{eff}} x^2}{m}} \] \[ v = \sqrt{\frac{84 \, \text{N/m} \cdot (0.27 \, \text{m})^2}{7.4 \, \text{kg}}} \] \[ v = \sqrt{\frac{84 \cdot 0.0729}{7.4}} \] \[ v = \sqrt{\frac{6.1296}{7.4}} \] \[ v \approx \sqrt{0.8284} \] \[ v \approx 0.909 \, \text{m/s} \][/tex]
6) The magnitude of the acceleration[tex]\( a \)[/tex]of the block as it passes through equilibrium is given by Newton's second law:
[tex]\[ F = m \cdot a \] \[ a = \frac{F}{m} \] \[ a = \frac{22.68 \, \text{N}}{7.4 \, \text{kg}} \] \[ a \approx 3.065 \, \text{m/s}^2 \][/tex]
7) The position[tex]\( x(t) \) of the block at a time \( t \)[/tex] after it is released can be found using the equation for simple harmonic motion: [tex]\[ x(t) = A \cos(2\pi f t) \] \[ x(t) = 0.27 \cos\left(\frac{2\pi}{1.86} \cdot 1.06\right) \] \[ x(t) = 0.27 \cos(3.61\pi) \] \[ x(t) \approx 0.27 \cdot (-1) \] \[ x(t) \approx -0.27 \, \text{m} \][/tex]
8) The net force on the block at time [tex]\( t \)[/tex] is given by Hooke's Law, taking into account the position of the block:
[tex]\[ F(t) = k_{\text{eff}} \cdot x(t) \] \[ F(t) = 84 \, \text{N/m} \cdot (-0.27 \, \text{m}) \] \[ F(t) \approx -22.68 \, \text{N} \][/tex]
9) The total energy stored in the system[tex]\( E \)[/tex] is the potential energy at the maximum displacement, which is equal to the kinetic energy at the equilibrium position:
[tex]\[ E = \frac{1}{2} k_{\text{eff}} x^2 \] \[ E = \frac{1}{2} \cdot 84 \, \text{N/m} \cdot (0.27 \, \text{m})^2 \] \[ E = 42 \, \text{N/m} \cdot 0.0729 \, \text{m}^2 \] \[ E \approx 3.065 \, \text{J} \][/tex]
10) The period of oscillation is independent of the amplitude of the motion and depends only on the mass and the spring constant. Therefore, if the block had been given an initial push, the period of oscillation would not change. The correct answer is: the period would not change.
An infinite plane of charge has a surface charge density of 5 µC/m2 . How far apart are the equipotential surfaces whose potentials differ by 105 V? The permittivity of free space is 8.85 × 10−12 C 2 /N · m2 . Answer in units of mm.
Answer:
Distance in mm will be 0.3718 mm
Explanation:
We have given charge surface charge density [tex]\rho _s=5\mu c/m^2=5\times 10^{-6}\mu c/m^2[/tex]
We know that electric field due to surface charge density is given by
[tex]E=\frac{\rho _S}{2\epsilon _0}=\frac{5\times 10^{-6}}{2\times 8.85\times 10^{-12}}=2.824\times 10^5Volt/m[/tex]
We have given potential difference V = 105 volt
We know that potential difference is given by [tex]V=Ed[/tex]
So [tex]105=2.824\times 10^5\times d[/tex]
[tex]d=37.181\times 10^{-5}m=0.3718mm[/tex]
If a system is isolated, the total energy of the system ________. If a system is isolated, the total energy of the system ________. depends on the work into the system. increases constantly. depends on the work out of the system. is constant. decreases constantly.
Answer:
Is constant.
Explanation:
Isolated systems cannot exchange energy or matter outside the borders of the system.
An isolated system is a system that has no exchange of matter or energy with its environment. Despite changes in internal energy due to heat transfer or work done within the system, the total energy of an isolated system remains constant. The total energy of the system encompasses its kinetic energy, potential energy, and internal energy.
Explanation:If a system is isolated, the total energy of the system is constant. This concept is part of the conservation of energy principle. An isolated system is one in which there is no exchange of matter or energy with the external environment. For instance, an ideal gas inside a thermally insulating and immoveable container would be an isolated system.
Though the internal energy of the system could change through processes such as heat transfer or work done on the system, the total energy remains unchanged. In other words, while energy itself might change forms within the system, the sum of kinetic, potential, and internal energy doesn't alter.
Consider a situation where heat transfer puts 159.00 J into the system, which raises the internal energy by 9.00 J. Despite how the energy was acquired, the system’s final state relates to its internal energy. Therefore, the initial and final total energy of the system remains same.
It's important to note that while total energy remains constant in isolated systems, in open systems (which can exchange energy and/or matter with its surroundings), the total energy can increase or decrease based on the work in/out of the system.
Learn more about Total Energy in Isolated Systems here:https://brainly.com/question/33504913
#SPJ3
A crate is sitting in the center of a flatbed truck. As the truck accelerates to the east, the crate moves with it, not sliding on the bed of the truck. In what direction is the friction force exerted by the bed of the truck on the crate?
Answer:East
Explanation:
Given
The truck is accelerating towards east along with crate and crate is not sliding.
Friction Force on the crate will act towards the east as friction Force always opposes the motion of an object. Also in this case, if friction force is absent then crate would have moved backward.
Thus static Friction will help the crate to move with truck.
Water has a very high specific heat capacity when compared to most other common materials. In fact, ethyl alcohol has a specific heat that is only about that of water, whereas the specific heat of lead is about that of water. Suppose that you have equal‑mass samples of each material and that each sample is at the same initial temperature. You then carefully transfer the same amount of heat into each sample and measure the resulting final temperature of each. Rank the final temperature of each sample from highest to lowest.
Answer:
Lead, Ethyl alcohol and water.
Explanation:
Specific heat capacity of a substance can be define as the quantity of heat that is absorbed by a substance needed to change the temperature of a unit mass of one kilogram of the substance by one kelvin
The ranking of the final temperature of the substances from highest to lowest is;
Lead > Ethyl alcohol > Water
We are told that water has a very high specific heat capacity.
Specific heat capacity of ethyl alcohol is 2.46 J/g.K which is about 2/5 of water
Specific heat capacity of lead = (1/30) of water
Now, the specific heat capacity is the heat required to raise the temperature of a substance.
This means that the higher the specific heat capacity, the lower the final temperature.
Now, from the samples given, we can say that;
Water has the highest specific heat capacity Ethyl alcohol has the second highest specific heat capacityLead has the lowest specific heat capacity.Thus, lead will have the highest final temperature followed by ethyl alcohol, then water.
Read more at;https://brainly.com/question/14688305
You open the refrigerator in your room and put in a case of room-temperature root beer. After an hour, the root beer is ice cold. If your room air did not exchange any heat with the outdoor air during that time, the room air will be________.
Answer:
warmer
Explanation:
The law of conservation of energy tells us that energy cannot be created or destroyed, it can be transferred or converted from one from to another. In this question when the beer that is at room temperature is put in the fridge, it loses some heat energy. This heat energy is not destroyed, the fridge through multiple processes eventually releases this heat to the room through pipes at the back which is why they are normally warm. the heat from the food inside is expelled to the room. It is not lost.
The 78 kg climber here is supported in the "chimney" by the friction forces exerted on her shoes and back. The static coefficients of friction between her shoes and the wall, and between her back and the wall, are 0.88 and 0.63, respectively. What is the minimum normal force he must exert? Assume the walls are vertical and that friction forces are both at a maximum.
Answer:
N = 516.56 N
Explanation:
By the means of a sum of forces on the x-axis:
[tex]N_b-N-f=0[/tex]
Where [tex]N_b[/tex] is the force on her back and [tex]N_f[/tex] is the force on her feet:
[tex]N_b=N-f = N[/tex]
On the y-axis:
[tex]Ff_b+Ff_f-m*g=0[/tex]
[tex]\mu_b*N_b+\mu_f*N_f-m*g=0[/tex]
[tex]\mu_b*N+\mu_f*N=m*g[/tex]
[tex](\mu_b+\mu_f)*N=m*g[/tex]
[tex]N=\frac{m*g}{\mu_b+\mu_f}[/tex] using [tex]g=10m/s^2[/tex]
N = 516.56N
Determine the COP of a heat pump that supplies energyto a house at a rate of 8000 kJ/h for each kW of electric power it draws. Also, determine the rate of energy absorption from the outdoor air.
The Coefficient of Performance (COP) of the heat pump is 2.22 and the rate at which it absorbs energy from the outdoor air is 1222 Watts.
Explanation:The quality of a heat pump is judged by how much energy is transferred by heat into the warm space compared with how much input work is required. This measure is referred to as the Coefficient of Performance (COP). To calculate the COP of a heat pump which supplies energy at a rate of 8000 kJ/h for each kW of electrical power it draws, we have to convert all the units to the same base, which in this case will be watts (W).
1 kW = 1000 W and 8000 kJ/h = (8000*1000) J/3600 s = 2222 W
Hence, using the formula for the COP of the heat pump: COPhp = Qh/W, we substitute the given values and we get: COPhp = 2222W/1000W = 2.22. This means that for every 1 Watt of electricity the heat pump uses, it generates 2.22 Watts of heat for the house.
Additionally, the rate of energy absorption from the outdoor air is the difference between the rate of heat supply to the house and the electric power drawn, which is 2222W - 1000W = 1222W.
Learn more about Coefficient of Performance here:https://brainly.com/question/30902201
#SPJ11
The COP of the heat pump is 2.22, and the rate of energy absorption from the outdoor air is 1.22 kJ/s.
Determining the COP of a Heat Pump
The Coefficient of Performance (COP) of a heat pump is defined as the ratio of heat energy delivered to the heated space (Qh) to the energy input (W). In this case, we are given that the heat pump supplies 8000 kJ/h for each kW of electric power it draws.
Firstly, convert the supplied energy and power input to consistent units. Since 1 kW = 1 kJ/s, we have:
Energy supplied, Qh = 8000 kJ/h = 8000 / 3600 kJ/s = 2.22 kJ/s
Power input, W = 1 kW = 1 kJ/s
Apply the COP formula:
COP = Qh / W = 2.22 kJ/s / 1 kJ/s = 2.22
To determine the rate of energy absorption from the outdoor air (Qc), use the energy balance equation:
Qh = Qc + W
Solving for Qc:
Qc = Qh - W = 2.22 kJ/s - 1 kJ/s = 1.22 kJ/s
Thus, the COP of the heat pump is 2.22 and the rate of energy absorption from the outdoor air is 1.22 kJ/s.
A 3.00-kg rifle fires a 0.00500-kg bullet at a speed of 300 m/s. Which force is greater in magnitude:(i) the force that the rifleexerts on the bullet; or (ii) the force that the bulletexerts on the rifle?A. the force that the rifle exerts on the bulletB. the force that the bullet exerts on the rifleC. both forces have the same magnitudeD. not enough information given to decide
Answer:
C. both forces have the same magnitude
Explanation:
Here the action force is equal to the reaction force in accordance with the Newton's third law of motion.
Also when we apply the conservation of momentum so that the momentum bullet and the momentum of the gun are equal and according to the second law of motion by Newton, we have force equal to the rate of change in momentum.
We have the equation for momentum as:
[tex]p=m.v[/tex]
Newton's second law is Mathematically given as:
[tex]F=\frac{dp}{dt}[/tex]
Momentum is constant and the reaction time is equal, so the force exerted will also be equal.
The correct answer is C. both forces have the same magnitude.
According to Newton's third law of motion, for every action, there is an equal and opposite reaction. This means that when the rifle fires the bullet, the force exerted by the rifle on the bullet is equal in magnitude to the force exerted by the bullet on the rifle.
Let's denote the force exerted by the rifle on the bullet as [tex]\( F_{rb} \)[/tex]and the force exerted by the bullet on the rifle as[tex]\( F_{br} \).[/tex] According to Newton's third law:
[tex]\[ F_{rb} = -F_{br} \][/tex]
The magnitudes of these forces are equal, even though they are in opposite directions.
To calculate the magnitude of these forces, we can use the impulse-momentum theorem, which states that the change in momentum of an object is equal to the impulse applied to it.
Before the rifle is fired, both the bullet and the rifle are at rest, so their initial momenta are zero. After the rifle is fired, the bullet has a velocity of 300 m/s, and we can assume the rifle has a much smaller recoil velocity due to its much larger mass.
The change in momentum of the bullet is:
[tex]\[ \Delta p_{bullet} = m_{bullet} \times v_{bullet} \][/tex]
[tex]\[ \Delta p_{bullet} = 0.00500 \, \text{kg} \times 300 \, \text{m/s} \][/tex]
[tex]\[ \Delta p_{bullet} = 1.5 \, \text{kg} \cdot \text{m/s} \][/tex]
The change in momentum of the rifle is equal in magnitude and opposite in direction to the change in momentum of the bullet, assuming no other forces are acting on the system (like air resistance or friction):
[tex]\[ \Delta p_{rifle} = -\Delta p_{bullet} \][/tex]
[tex]\[ \Delta p_{rifle} = -1.5 \, \text{kg} \cdot \text{m/s} \][/tex]
Since the time interval [tex]\( \Delta t \)[/tex] over which the forces are applied is the same for both the bullet and the rifle, the forces can be calculated using the impulse-momentum theorem:
[tex]\[ F_{rb} = \frac{\Delta p_{bullet}}{\Delta t} \][/tex]
[tex]\[ F_{br} = \frac{\Delta p_{rifle}}{\Delta t} \][/tex]
Since [tex]\( \Delta p_{bullet} = -\Delta p_{rifle} \)[/tex], it follows that:
[tex]\[ F_{rb} = -F_{br} \][/tex]
Therefore, the forces are equal in magnitude and opposite in direction, which is consistent with Newton's third law. The correct choice is C, both forces have the same magnitude.
Part A What is the function of the nuclear pore complex found in eukaryotes? What is the function of the nuclear pore complex found in eukaryotes? It synthesizes the proteins required to copy DNA and make mRNA. It assembles ribosomes from raw materials that are synthesized in the nucleus. It selectively transports molecules out of the nucleus but prevents all inbound molecules from entering the nucleus. It regulates the movement of proteins and RNAs into and out of the nucleus.
Answer:
It regulates the movement of proteins and RNAs into and out of the nucleus
Explanation:
The nuclear pore complex are protein channels connecting the outer membrane of the nucleus to the inner membrane of the nucleus. They securely regulates the almost all of the transport of protein and RNAs into and out of the nucleus.
The nuclear pore complex in eukaryotes is a protein complex that regulates the transportation of molecules between the nucleus and cytoplasm. It selectively allows passage of specific molecules, including ions, proteins, and RNA. It is integral to cellular functioning and to maintaining the cell’s genetic stability.
Explanation:The nuclear pore complex found in eukaryotes regulates the traffic of molecules between the nucleus and cytoplasm. This rosette-shaped complex, composed of multiple proteins, allows for the selective passage of molecules such as ions, RNA, and proteins. Hence, it is crucial for the cell's functioning. For instance, RNA, which is created and spliced within the nucleus, needs to be transported to the cytoplasm for translation, and this transportation occurs through the nuclear pore complex. Moreover, the nuclear pore complex helps maintain the structure of the nucleus by allowing the passage of ions and molecules, ensuring the proper functioning of the nucleoplasm.
The composition of the nuclear pore complex makes it an efficient system for the transfer and regulation of certain molecules. Besides, it secures the cell's nucleus against unwanted, larger, or harmful substances that could potentially penetrate and damage the nucleus. Consequently, the nuclear pore complex contributes significantly to maintaining the cell's health and its genetic stability.
Learn more about Nuclear Pore Complex here:https://brainly.com/question/14352910
#SPJ3
Two football players collide head-on in midair while trying to catch a thrown football and cling together. The first player is 94 kg and has an initial velocity of 6 m/s, while the second player is 116 kg and has an initial velocity of -5 m/sn the next three parts, (d) through (f), justify that friction could be ignored compared to the forces of collision by considering the change in momentum of the first player. Let's assume that the collision lasts for 10ms. Calculate the force on the first player by the second player during the collision
Final answer:
The combined velocity of the two football players just after they collide and cling together is calculated to be 0.80 m/s in the direction of the first player's original motion, using the law of conservation of momentum.
Explanation:
To determine the velocity just after impact when two football players collide and cling together, we can use the law of conservation of momentum. The initial momentum of the system is the sum of the momentum of each player before they collide. For the first player with a mass of 95.0 kg and velocity of 6.00 m/s, and the second player with a mass of 115 kg and velocity of -3.50 m/s, the total initial momentum is:
(95.0 kg × 6.00 m/s) + (115 kg × -3.50 m/s) = 570 kg·m/s - 402.5 kg·m/s = 167.5 kg·m/s.
After the collision, the two players cling together and thus have a combined mass of 95.0 kg + 115 kg = 210 kg. The final velocity of the two players clinging together can be found by dividing the total initial momentum by the combined mass:
Final velocity = Total initial momentum / Combined mass = 167.5 kg·m/s / 210 kg = 0.80 m/s.
Therefore, the combined velocity of the two football players just after the collision is 0.80 m/s in the direction of the first player's initial motion.
Which wavelength produces fluorescence? Why do you think this wavelength produces fluorescence while the other does not?
Answer:
Long wavelength
Explanation:
Wavelengths that corresponds to the bands of blue and red are strongly absorbed whereas the wavelengths that lie in the mid-range corresponds to green light that are absorbed weakly.
Fluorescence produced is always directed towards longer wavelengths of the spectra as compared to the corresponding spectra for absorption.
A transverse sinusoidal wave on a string has a period T = 25.0 ms and travels in the negative x direction with a speed of 30.0 m/s. At t = 0, an element of the string at x = 0 has a transverse position of 2.00 cm and is traveling downward with a speed of 2.00 m/s.
(a) What is the amplitude of the wave?
(b) What is the initial phase angle?
(c) What is the maximum transverse speed of an element of the string?
(d) Write the wave equation for the wave.
The amplitude is 2.00 cm. The initial phase angle, the maximum speed, and the wave equation can be found by substituting the given values into the relevant formulas.
Explanation:The (a) amplitude of the wave is determined by the maximum displacement from the equilibrium position, which is 2.00 cm.
(b) The initial phase angle can be determined by the equation φ = -arccos(v₁/ωA), where v₁ is the initial speed of the element, ω is the angular frequency, and A is the amplitude. Here, ω=2π/T, T is the period. Therefore, φ = -arccos((-2.00 m/s)/(2π/(25.0 ms)*2.00 cm))
(c) The maximum transverse speed of an element of the string would be ωA, since the speed of the element is highest when it passes through its equilibrium position. Thus, the maximum speed = 2π/(25.0 ms)*2.00 cm.
(d) And lastly, the wave equation for the wave is Y(x,t) = Acos(kx + ωt + φ), where Y is the transverse displacement, A is the amplitude, k is the wave number, ω is the angular frequency, t is time, x is position, and φ is the phase constant. In this case, k = 2π/λ, where λ is the wavelength which can be found by dividing the speed of the wave by the frequency (v/f = λ).
Learn more about Transverse Sinusoidal Wave here:https://brainly.com/question/30582607
#SPJ3
We determined the wave's amplitude to be approximately 3.33 cm, the initial phase angle to be π/3, and the maximum transverse speed to be about 8.37 m/s. The wave equation was found to be y(x, t) = 0.0333 sin(8.38x + 251.33t + π/3). Step-by-step explanations clarify each part.
Part a :
We start with the transverse wave function: y(x, t) = A sin(kx + ωt + φ). Given that at t = 0 and x = 0, the transverse position y is 2.00 cm, traveling downward with a speed of 2.00 m/s.
First, determine the frequency, and hence the angular frequency ω. The period T is given as 25.0 ms:
ω = 2π/T = 2π/(25.0 x 10⁻³) s ≈ 251.33 rad/s
The transverse speed of the string element is:
dy/dt = -Aω cos(φ) = -2.00 m/s (since it's traveling downward)
Given y(0, 0) = A sin(φ) = 0.020 m:
A = 0.020 m / sin(φ)
Using the transverse speed equation, we get:
-0.25133 A cos(φ) = -2.00 m/s
cos(φ) = 2.00 / (0.25133 A)
From both equations, sin²(φ) + cos²(φ) = 1, solving for A.
A = 2.00 cm x √(1 + (1/0.25133²)) ≈ 3.33 cm
Part b :
sin(φ) = 0.020 / 0.0333 ≈ 0.6
cos(φ) = 2.00 / (251.33 x 0.0333) ≈ 0.8
φ ≈ π/3
Part c :
The maximum transverse speed is given by Aω ≈ 3.33 cm x 251.33 rad/s ≈ 8.37 m/s.
Part d :
The general form of the sinusoidal wave traveling in the negative x-direction is:
y(x, t) = 0.0333 sin(kx + ωt + π/3)
Given that the wave speed v = 30.0 m/s:
k = ω/v = 251.33 rad/s / 30.0 m/s ≈ 8.38 m-1
Wave equation becomes:
y(x, t) = 0.0333 sin(8.38x + 251.33t + π/3)
A client is receiving an IV solution of sodium chloride 0.9% (Normal Saline) 250 ml with amiodarone (Cordarone) 1 gram at 17 ml/hour. How many mg/minute of amiodarone is infusing? (Enter numeric value only. If rounding is required, round to the nearest tenth.)
Answer:
1.1mg/min
Explanation:
We are given that
Volume of solution=250 ml
Mass of amiodarone=1 g
Infusion rate=17 ml/hr
We know that
1 g= 1000 mg
Ratio of 1000g:250 ml=[tex]\frac{1000}{25}=4 mg/ml[/tex]
The concentration of solution=4mg/ml
Amiodarone infusing (mg/min)=[tex]\frac{infusion \;rate(ml/hr)\times concentration}{60}[/tex]
Because 1 hr= 60 minute
Amiodarone infusing=1.1mg/m
Hence, 1.1 mg/min of amiodarone is infusing.
The amount of amiodarone infusing per minute is 1.1 mg when calculated from the prescribed dosage of 1 gram in a 250 ml IV solution infused at 17 ml/hour.
The question revolves around the calculation of the amiodarone dosage being infused per minute through an intravenous (IV) therapy. Given the infusion rate of 17 ml/hour and a total amount of 1 gram (1000 mg) of amiodarone in 250 ml of Normal Saline, we can calculate the dosage per minute. First, find the concentration of amiodarone in mg/ml by dividing 1000 mg by 250 ml to get 4 mg/ml. Then, we calculate the amount infused per hour by multiplying this concentration (4 mg/ml) by the infusion rate (17 ml/hour). Finally, divide by 60 minutes to get the dosage per minute.
The calculation steps are as follows:
1. Amiodarone concentration = 1000 mg ÷ 250 ml = 4 mg/ml
2. Amiodarone per hour = 4 mg/ml × 17 ml/hour = 68 mg/hour
3. Amiodarone per minute = 68 mg/hour ÷ 60 minutes/hour = 1.13 mg/minute
The amount of amiodarone infused per minute is therefore approximately 1.13 mg, which rounds to 1.1 mg/minute when rounding to the nearest tenth.
If this energy were used to vaporize water at 100.0 ∘C, how much water (in liters) could be vaporized? The enthalpy of vaporization of water at 100.0 ∘C is 40.7 kJ⋅mol−1. (Assume the density of water is 1.00 g/mL.)
Answer:
0.429 L of water
Explanation:
First to all, you are not putting the value of the energy given to vaporize water, so, to explain better this problem, I will assume a value of energy that I took in a similar exercise before, which is 970 kJ.
Now, assuming that the water density is 1 g/mL, this is the same as saying that 1 g of water = 1 mL of water
If this is true, then, we can assume that 1 kg of water = 1 L of water.
Knowing this, we have to use the expression to get energy which is:
Q = m * ΔH
Solving for m:
m = Q / ΔH
Now "m" is the mass, but in this case, the mass of water is the same as the volume, so it's not neccesary to do a unit conversion.
Before we begin with the calculation, we need to put the enthalpy of vaporization in the correct units, which would be in grams. To do that, we need the molar mass of water:
MM = 18 g/mol
The enthalpy in mass:
ΔH = 40.7 kJ/mol / 18 g/mol = 2.261 kJ/g
Finally, solving for m:
m = 970 / 2.261 = 429 g
Converting this into volume:
429 g = 429 mL
429 / 1000 = 0.429 L of water
When we are not putting the value of the energy given to vaporize water I will assume a value of energy that I took in a similar exercise before, which is 970 kJ.Now, we are assuming that the water density is 1 g/mL, this is the same as saying that 1 g of water = 1 mL of waterAlthough when If this is true, then, we can assume that 1 kg of water = 1 L of water.
Now, we have to use the expression to get energy which is:Then Q = m * ΔHSolving for is m:Now m = Q / ΔH Now after that "m" is the mass, but in this case, the mass of water is the same as the volume, also that it's not necessary to do unit conversion.Before that we begin with the calculation, then we need to put the enthalpy of vaporization in the correct units, also that which would be in grams. To do that, then we need the molar mass of water:
Then MM = 18 g/molThe enthalpy in mass:After that ΔH = 40.7 kJ/mol / 18 g/mol = 2.261 kJ/gFinally, solving for m:Then m = 970 / 2.261 = 429 gThen Converting this into volume:Now, 429 g = 429 mLThus, 429 / 1000 = 0.429 L of water
Find out more information about vaporize here:
https://brainly.com/question/16041370
A jet aircraft is traveling at 201 m/s in horizontal flight. The engine takes in air at a rate of 44.1 kg/s and burns fuel at a rate of 3.28 kg/s. The exhaust gases are ejected at 669 m/s relative to the aircraft. Find the thrust of the jet engine. Answer in units of N.
Answer:22,833.12 N
Explanation:
Given
Velocity of Jet [tex]v=201 m/s[/tex]
Velocity of Exhaust gases [tex]u=669 m/s[/tex]
Rate of intake of air [tex]\frac{\mathrm{d} M_a}{\mathrm{d} t}=44.1 kg/s[/tex]
Rate at which Fuel is burned is [tex]\frac{\mathrm{d} M_f}{\mathrm{d} t}=3.28 kg/s[/tex]
Rate of change of mass in Rocket [tex]\frac{\mathrm{d} M}{\mathrm{d} t}=\frac{\mathrm{d} M_a}{\mathrm{d} t}+\frac{\mathrm{d} M_f}{\mathrm{d} t}=44.1+3.28=47.38 kg/s[/tex]
Thrust on Rocket is given by
[tex]F=\frac{\mathrm{d} M}{\mathrm{d} t}u-\frac{\mathrm{d} M_a}{\mathrm{d} t}v[/tex]
[tex]F=47.38\times 669-44.1\times 201[/tex]
[tex]F=31,697.22-8864.1=22,833.12 N[/tex]
A 120-kg object and a 420-kg object are separated by 3.00 m At what position (other than an infinitely remote one) can the 51.0-kg object be placed so as to experience a net force of zero from the other two objects?
Answer:
1.045 m from 120 kg
Explanation:
m1 = 120 kg
m2 = 420 kg
m = 51 kg
d = 3 m
Let m is placed at a distance y from 120 kg so that the net force on 51 kg is zero.
By use of the gravitational force
Force on m due to m1 is equal to the force on m due to m2.
[tex]\frac{Gm_{1}m}{y^{2}}=\frac{Gm_{2}m}{\left ( d-y \right )^{2}}[/tex]
[tex]\frac{m_{1}}{y^{2}}=\frac{m_{2}}{\left ( d-y \right )^{2}}[/tex]
[tex]\frac{3-y}{y}=\sqrt{\frac{7}{2}}[/tex]
3 - y = 1.87 y
3 = 2.87 y
y = 1.045 m
Thus, the net force on 51 kg is zero if it is placed at a distance of 1.045 m from 120 kg.
A bird is flying with a speed of 18.6 m/s over water when it accidentally drops a 2.30 kg fish. The acceleration of gravity is 9.81 m/s 2 . If the altitude of the bird is 5.50 m and air resistance is disregarded, what is the speed of the fish when it hits the water?
Answer:21.3 m/s
Explanation:
Given
speed [tex]u=18.6 m/s[/tex]
mass of fish [tex]m_f=2.30 kg[/tex]
Altitude [tex]h=5.50 m[/tex]
Time taken to cover h
[tex]h=ut+\frac{at^2}{2}[/tex]
[tex]5.5=\frac{9.8\times t^2}{2}[/tex]
[tex]t^2=1.122[/tex]
[tex]t=1.05 s[/tex]
Vertical velocity after [tex]t=1.05 s[/tex]
[tex]v_y=0+gt[/tex]
[tex]v_y=9.8\times 1.05=10.38 m/s[/tex]
Horizontal velocity will remain same [tex]u=18.6 m/s[/tex]
Net velocity [tex]v_{net}=\sqrt{u^2+v_y^2}[/tex]
[tex]v_{net}=\sqrt{18.6^2+10.38^2}[/tex]
[tex]v_{net}=\sqrt{453.76}=21.30 m/s[/tex]
Where does the heat come from that drives this convection current in the mantle
Answer:
Earth's interior (Core)
Explanation:
The earth is comprised of 3 distinct layers namely the Core, the Mantle and the Crust, which are divided based on their composition as well as density.
The core of the earth is extremely very hot where the inner core remains solid and outer core acts a liquid. It is mainly comprised of iron, nickel and other siderophile elements.
A large amount of heat (energy) is radiated from this core region towards the surface of the earth. Due to this, the mantle rocks forms magma that creates the convection currents, where the hot and less dense magma rises upward and the cool and denser magma sinks to the bottom. This occurs continuously, as a result of which the lithospheric plates are forced to move over the less dense layer of asthenosphere.
Thus, the heat energy that drives the convection current in the mantle is provided from the interior (core) of the earth.
Answer:
earths core
Explanation:
A jet aircraft is traveling at 291 m/ s in horizontal flight. The engine takes in air at a rate of 63.8 kg/s and burns fuel at a rate of 1.21 kg/s. The exhaust gases are ejected at 667 m/s relative to the aircraft. Find the thrust of the jet engine and the delivered power.
Answer:
thrust = 24795.87 N
Power = 7.215 MW
Explanation:
given data
The speed of the jet v = 291 m/s
The air intake is dMa/dt = 63.8 kg/s
The fuel burn rate is dMf/dt = 1.21 kg/s
The speed of the exhaust gas is u = 667 m/s
to find out
thrust of the jet engine and the delivered power
solution
first we get here rate of mass change in the rocket that is
rate of mass change dM/dt = 63.8 + 1.21
rate of mass change dM/dt = 65.01 kg/s
and
The thrust on the rocket will be here
thrust T = (dM/dt) u - (dMa/dt) v ..................1
thrust T = (65.01) 667 - (63.8) 291
thrust T = 24795.87 N
and
now the power of the rocket will be here
Power = speed × thrust .................2
Power = 291 × 24795.87
Power = 7.215 MW
All of the following statements about the pyramid of biomass are correct EXCEPT: a. Biomass is the total dry mass of the organisms presentb. The base of the pyramid generally represents primary consumersc The amount of biomass at a particular level of the pyramid depends on the amount of energy availabled. Certain toxins tend to become concentrated at the upper levels of the pyramide. Biomass pyramids tend to vary for different ecosystems.
The correct answer is B. The base of the pyramid generally represents primary consumers.
Explanation
A biomass pyramid is a graphic representation of the biomass present in a unit area of various trophic levels, this graphic representation shows the relationship between biomass and the trophic level that quantifies the biomass available at each trophic level of an energy community at a specific time. In general, an ecosystem is represented in a pyramid in which the primary producers occupy the base of the pyramid because they have more biomass in a unitary area. An example of the organization of a biomass pyramid is an ecosystem in which caterpillars feed on oak trees; In turn, the caterpillars are consumed by a bluebird, which is consumed by a sparrowhawk. In this example, the oak tree is at the base of the biomass pyramid, because it feeds dozens of caterpillars, thanks to its massive biomass, and the sparrowhawk occupies the highest level of the pyramid. Therefore, it is incorrect to affirm that the base of the pyramid generally represents primary consumers, because the primary producers are generally at the base of the pyramid. So, the correct answer is B. The base of the pyramid generally represents primary consumers.
How does the force of gravity between two bodies change when the distance between them doubles?
Answer:
If the distance is doubled, the force of gravity between the two bodies is one-fourth as strong as before
Explanation:
The force of gravity between two bodies depends on the mass and distance. But we will focus on distance since that's what the question asks
Therefore, the force of gravity decreases as distance between the bodies increases.
f R = 12 cm, M = 360 g, and m = 70 g (below), find the speed of the block after it has descended 50 cm starting from rest. Solve the problem using energy conservation principles. (Treat the pulley as a uniform disk.) Solve the problem using energy conservation principles. (b) Repeat (a) with R = 5.0 cm.
Answer:
a)v= 1.6573 m/s
Explanation:
a) Considering center of the disc as our reference point. The potential energy as well as the kinetic energy are both zero.
let initially the block is at a distance h from the reference point.So its potential energy is -mgh as its initial KE is zero.
let the block descends from h to h'
During this descend
PE of the block = -mgh' {- sign indicates that the block is descending}
KE= 1/2 mv^2
rotation KE of the disc= 1/2Iω^2
Now applying the law of conservation of energy we have
[tex]-mgh = \frac{1}{2}mv^2+\frac{1}{2}I\omega^2-mgh'[/tex]
[tex]mg(h'-h) = \frac{1}{2}mv^2+\frac{1}{2}I\omega^2[/tex] ................i
Rotational inertia of the disc = [tex]\frac{1}{2}MR^2[/tex]
Angular speed ω =[tex]\frac{v}{R}[/tex]
by putting vales of ω and I we get
so, [tex]\frac{1}{2}I\omega^2= \frac{1}{4}Mv^2[/tex]
Now, put this value of rotational KE in the equation i
[tex]mg(h'-h) = \frac{1}{4}(2m+M)v^2[/tex]
⇒[tex]v= \sqrt{\frac{4mg(h'-h)}{2m+M} }[/tex]
Given that (h'-h)= 0.5 m M= 360 g m= 70 g
[tex]v= \sqrt{\frac{4\times70\times 9.81\times 0.5}{140+360} }[/tex]
v= 1.6573 m/s\
b) The rotational Kinetic energy of the disc is independent of its radius hence on changing the radius there is no change in speed of the block.
Answer:
The speed of the block is 1.65 m/s.
Explanation:
Given that,
Radius = 12 cm
Mass of pulley= 360 g
Mass of block = 70 g
Distance = 50 cm
(a). We need to calculate the speed
Using energy conservation
[tex]P.E=K.E[/tex]
[tex]P.E=mgh[/tex]
[tex]K.E=\dfrac{1}{2}mv^2+\dfrac{1}{2}I\omega^2[/tex]
[tex]K.E=\dfrac{1}{2}mv^2+\dfrac{1}{2}I\times(\dfrac{v}{r})^2[/tex]
[tex]K.E=\dfrac{1}{2}mv^2+\dfrac{1}{2}\times0.5Mr^2\times(\dfrac{v}{r})^2[/tex]
[tex]K.E=\dfrac{1}{2}mv^2+\dfrac{1}{2}\times0.5M\times v^2[/tex]
[tex] K.E=\dfrac{1}{2}v^2(m+0.5M)[/tex]
Put the value into the formula
[tex]mgh=\dfrac{1}{2}v^2(m+0.5M)[/tex]
[tex]v^2=\dfrac{2mgh}{m+0.5M}[/tex]
[tex]v=\sqrt{\dfrac{2mgh}{m+0.5M}}[/tex]
[tex]v=\sqrt{\dfrac{2\times70\times10^{-3}\times9.8\times50\times10^{-2}}{70\times10^{-3}+0.5\times360\times10^{-3}}}[/tex]
[tex]v=1.65\ m/s[/tex]
(b), We need to calculate the speed of the block
When r = 5.0 cm
Here, The speed of the block is independent of radius of pulley.
Hence, The speed of the block is 1.65 m/s.
The door is 3.00 m tall and 1.25 m wide, and it weighs 750 N . You can ignore the friction at the hinges. If Exena applies a force of 220 N at the edge of the door and perpendicular to it, how much time does it take her to close the door?
Answer:
0.674 s = t
Explanation:
Assuming that the door is completely open, exena need to rotate the door 90°.
Now, using the next equation:
T = I∝
Where T is the torque, I is the moment of inertia and ∝ is the angular aceleration.
Also, the torque could be calculated by:
T = Fd
where F is the force and d is the lever arm.
so:
T = 220N*1.25m
T = 275 N*m
Addittionaly, the moment of inertia of the door is calculated as:
I = [tex]\frac{1}{3}Ma^2[/tex]
where M is the mass of the door and a is the wide.
I =[tex]\frac{1}{3}(750/9.8)(1.25)^2[/tex]
I = 39.85 kg*m^2
Replacing in the first equation and solving for ∝, we get::
T = I∝
275 = 39.85∝
∝ = 6.9 rad/s
Now, the next equation give as a relation between θ (the angle that exena need to rotate) ∝ (the angular aceleration) and t (the time):
θ = [tex]\frac{1}{2}[/tex]∝[tex]t^2[/tex]
Replacing the values of θ and ∝ and solving for t, we get:
[tex]\sqrt{\frac{2(\pi/2)}{6.9 rad/s}}[/tex] = t
0.674 s = t
A 600kg car is moving at 5 m/s to the right and elastically collided with a stationary 900 kg car. What is the velocity of the 900 kg car after the collision if the 600 kg car moves left at .714 m/s?
Answer:
[tex]\mathrm{v}_{2} \text { velocity after the collision is } 3.3 \mathrm{m} / \mathrm{s}[/tex]
Explanation:
It says “Momentum before the collision is equal to momentum after the collision.” Elastic Collision formula is applied to calculate the mass or velocity of the elastic bodies.
[tex]m_{1} v_{1}=m_{2} v_{2}[/tex]
[tex]\mathrm{m}_{1} \text { and } \mathrm{m}_{2} \text { are masses of the object }[/tex]
[tex]\mathrm{v}_{1} \text { velocity before the collision }[/tex]
[tex]\mathrm{v}_{2} \text { velocity after the collision }[/tex]
[tex]\mathrm{m}_{1}=600 \mathrm{kg}[/tex]
[tex]\mathrm{m}_{2}=900 \mathrm{kg}[/tex]
[tex]\text { Velocity before the collision } v_{1}=5 \mathrm{m} / \mathrm{s}[/tex]
[tex]600 \times 5=900 \times v_{2}[/tex]
[tex]3000=900 \times v_{2}[/tex]
[tex]\mathrm{v}_{2}=\frac{3000}{900}[/tex]
[tex]\mathrm{v}_{2}=3.3 \mathrm{m} / \mathrm{s}[/tex]
[tex]\mathrm{v}_{2} \text { velocity after the collision is } 3.3 \mathrm{m} / \mathrm{s}[/tex]
Final answer:
After calculating with the conservation of momentum for an elastic collision, the 900 kg car will have a velocity of 3.81 m/s to the right after it is hit by the 600 kg car.
Explanation:
The question asks about the post-collision velocity of a 900 kg car that was initially stationary and was hit by a 600 kg car moving at 5 m/s which, after the collision, moved left at 0.714 m/s. Using the principle of conservation of momentum for elastic collisions, we can set up the equation as follows:
Initial momentum = Final momentum
(600 kg × 5 m/s) + (900 kg × 0 m/s) = (600 kg × -0.714 m/s) + (900 kg × v)
Solving for v (the velocity of the 900 kg car after the collision), we obtain:
3000 kg·m/s = -428.4 kg·m/s + 900 kg × v
v = (3000 kg·m/s + 428.4 kg·m/s) / 900 kg
v = 3.81 m/s
Thus, the velocity of the 900 kg car after the collision is 3.81 m/s to the right.
An ideal refrigerator extracts 500 joules of heat from a reservoir at 295 K and rejects heat to a reservoir at 493 K. What is the ideal coefficient of performance and how much work is done in each cycle?
Answer:
C.O.P = 1.49
W = 335.57 joules
Explanation:
C.O.P = coefficient of performance = (benefit/cost) = Qc/W ...equ 1 where C.O.P is coefficient of performance, Qc is heat from cold reservoir, w is work done on refrigerator.
Qh = Qc + W...equ 2
W = Qh - Qc ...equ 3 where What is heat entering hot reservoir.
Substituting for W in equ 1
Qh/(Qh - Qc) = 1/((Qh /Qc) -1) ..equ 4
Since the second law states that entropy dumped into hot reservoir must be already as much as entropy absorbed from cold reservoir which gives us
(Qh/Th)>= (Qc/Tc)..equ 5
Cross multiple equ 5 to get
(Qh/Qc) = (Th/Tc)...equ 6
Sub equ 6 into equation 4
C.O.P = 1/((Th/Tc) -1)...equ7
Where Th is temp of hot reservoir = 493k and Tc is temp of cold reservoir = 295k
C.O.P = 1/((493/295) - 1)
C.O.P = 1.49
To solve for W= work done on every cycle
We substitute C.O.P into equ 1
Where Qc = 500 joules
1.49 = 500/W
W = 500/1.49
W = 335.57 joules