In a circuit of two lamps in parallel there is 5 v across one lamp. what is the voltage across the other lamp? answer in units of v.

The intensity level from a set of quintuplets (five babies) : 56 dB

Wave intensity is the power of a wave that is moved through a plane of one unit that is perpendicular to the direction of the wave

Can be formulated

[tex]\rm I=\dfrac{P}{A}[/tex]

I = intensity, W m⁻²

P = power, watt

A = area, m²

The farther the distance from the sound source, the smaller the intensity

[tex]\rm \dfrac{I_2}{I_1}=\dfrac{(r_1)^2}{(r_2)^2}[/tex]

So the intensity is inversely proportional to the square of the distance from the source

[tex]\rm I\approx \dfrac{1}{r^2}[/tex]

Intensity level (LI) can be formulated

[tex]\rm LI=10\:log\dfrac{I}{I_o}[/tex]

Io = 10⁻¹²

For the level of intensity of several sound sources as many as n pieces can be formulated:

The intensity level of 1 baby is

[tex]\rm LI=10\:log\dfrac{8.10^{-8}}{10^{-12}}[/tex]

LI = 10 log 8.10⁴

LI = 49

The intensity level of 5 babies :

LI5 = LI + 10 log n

LI5 = 49 + 10 log 5

LI5 = 49 + 7

LI5 = 56

The intensity of a laser beam

https://brainly.com/question/12873492

electric field

brainly.com/question/2080732

magnetism

brainly.com/question/10809295

Kinetic energy is a property of a moving item that is affected by both mass and velocity. The electron's kinetic energy with a de-Broglie wavelength of 34nm is 2.06 × [tex]10^-^2^2[/tex]J.

First, we have to convert de Broglie wavelength in m to satisfy the dimensions.

λ = 34.0nm =34×[tex]10^-^9[/tex].

To find  kinetic energy we need to find velocity and for that, we need to find momentum by using the formulae:

P= h/λ  = 6.6×[tex]10^-^3^4[/tex]/34×[tex]10^-^9[/tex] = 1.94×[tex]10^-^2^6[/tex] kgm/s.

After getting momentum we need to find the velocity

V=p/m = 1.94×[tex]10^-^2^6[/tex] / 9.1×[tex]10^-^3^1[/tex]= 2.13×[tex]10^4[/tex] m/s.

Now we have the value of velocity and by applying it  [tex]k=1/2mv^2[/tex], we can find easily find the kinetic energy

[tex]k=1/2mv^2[/tex] = 1/2 (9.1×[tex]10^-^3^1[/tex] kg)×(2.13×[tex]10^4[/tex] m/s[tex])^2[/tex] = 2.06×[tex]10^-^2^2[/tex]J.

Therefore, the kinetic energy of the particle is 2.06×[tex]10^-^2^2[/tex]J.

To know more about energy refer to:

https://brainly.com/question/8630757

Answer:

The change in her position (from beginning to end), along with the direction, is considered her displacement. This value is a measurement and a direction. The total distance along the path from her starting point to her end point is considered her distance. This value is a measurement only.

Explanation:

The frequency of the photons is equal to 1.22 ×10¹³ Hz and lies in the infrared region of the electromagnetic spectrum.

The frequency of the photons or light can be described as the number of oscillations in one second. The frequency possesses S.I. units per second or Hertz.

The relationship between momentum (p), frequency (ν), and speed of light (c) is:

p = hν/c

ν = pc/h

Given, the momentum of the photons, p = 2.7 ×10⁻²⁹ Kg.m/s

The speed of light, c = 3×10⁸ m/s

The plank's constant, h = 6.626 ×10⁻³⁴ Js

The frequency of the photons can determine from the above-mentioned relationship:

ν = (2.7 × 10⁻²⁹).( 3 × 10⁸)/ 6.626 × 10⁻³⁴

ν = 1.22 × 10¹³ Hz

Therefore, the frequency of the photons is 1.22 × 10¹³ Hz and lies in the infrared region of the spectrum.

Learn more about frequency, here:

brainly.com/question/18651058

#SPJ2

The total resistance in the parallel circuit with three 10-ohm resistors and a 15-volt battery is approximately 3.33 ohms. The total current through the circuit is approximately 4.50 amps.

To calculate the total resistance in a parallel circuit with three resistors of 10 ohms each, we use the formula for parallel resistance:

[tex]\frac{1}{R_{\text{total}}} = \frac{1}{R_1} + \frac{1}{R_2} + \frac{1}{R_3}[/tex]

Substituting the values:

1/Rtotal = 1/10 + 1/10 + 1/10

1/Rtotal = 3/10

Therefore, Rtotal = 10/3 = 3.33 ohms

Next, we calculate the total current using Ohm's Law:

I = V/Rtotal

Given the battery voltage is 15 volts:

I = 15/3.33 ≈ 4.50 amps

The total resistance in the parallel circuit with three 10-ohm resistors and a 15-volt battery is approximately 3.33 ohms. The total current through the circuit is approximately 4.50 amps.

Final answer:

The maximum power consumption of a 3.0-v portable CD player drawing 330 mA of current is calculated using the formula P = IV, giving a result of 0.99 W, which is not directly listed in the provided options.

Explanation:

The question asks for the maximum power consumption of a 3.0-volt portable CD player that draws a maximum of 330 milliamps of current. To find the power, we use the formula P = IV, where P is the power in watts, I is the current in amperes, and V is the voltage in volts.

In this case, I = 330 mA = 0.33 A (since 1A = 1000mA), and V = 3.0 V. Substituting these values into the formula gives:

P = 0.33 A × 3.0 V = 0.99 W.

The time in which the ball will reach the ground is about 1.10 s

Acceleration is rate of change of velocity.

[tex]\large {\boxed {a = \frac{v - u}{t} } }[/tex]

[tex]\large {\boxed {d = \frac{v + u}{2}~t } }[/tex]

a = acceleration ( m/s² )

v = final velocity ( m/s )

u = initial velocity ( m/s )

t = time taken ( s )

d = distance ( m )

Let us now tackle the problem !

This problem is about Kinematics.

We will solve it in the following way

Given:

initial speed = u = 1.53 m/s

initial height = H = 4.21 m

Unknown:

time taken = t = ?

Solution:

[tex]H = ut - \frac{1}{2}gt^2[/tex]

[tex]-4.21 = 1.53t - \frac{1}{2}(9.8)t^2[/tex]

[tex]-4.21 = 1.53t - 4.9t^2[/tex]

[tex]4.9t^2 - 1.53t - 4.21 = 0[/tex]

We will solve the above equation using the following quadratic function formula:

[tex]t = \frac{1.53 + \sqrt{1.53^2 - 4(4.9)(-4.21)}}{2(4.9)}[/tex]

[tex]t \approx 1.10 ~ s[/tex]

Grade: High School

Subject: Physics

Chapter: Kinematics

Keywords: Velocity , Driver , Car , Deceleration , Acceleration , Obstacle , Speed , Time , Rate

Answer:

C

Explanation:

10–9 m to 10–7 m

The size range for nanotechnology is 10⁻⁹ m to 10⁻⁷ m.

Nanotechnology improves and revolutionize, The new technology used in industry sectors like information technology, homeland security, medicine, transportation, energy, food safety, and environmental science.

A material with its dimensions less than 100 nanometers or ranging between 1 to 100nm are known as nanomaterials.

Thus, the correct choice is C.

Learn more more about nanotechnology

https://brainly.com/question/11946759

#SPJ2

Ohm's law claims that the voltage across a conductor is directly proportional to the current flowing through it.

(a) The resistance of the hairdryer will be 9.6 ohms.

(b)the current in the hairdryer will be 12.5 A.

When all physical parameters and temperature are constant,

Ohm's law claims that the voltage across a conductor is directly proportional to the current flowing through it.

This current-voltage connection may be expressed mathematically as,

The Equation of Ohm's Law

V=IR

(a)

The following data are given as

P = 1500 w

v = 120 v

The power generated in the hairdryer

[tex]\rm{P = vI}\\\\I=\frac{P}{v} \\\\I=\frac{1500}{120}\\\\I=12.5 A}[/tex]

To obtained the resistance

[tex]\rm R=\frac{v}{I} \\\\\rm R=\frac{120}{12.5} \\\\R= 9.6 ohm}[/tex]

Hence the resistance of the hairdryer will be 9.6 ohms.

(b)

The Equation of Ohm's Law

V=IR

[tex]\rm I =\frac{V}{R} \\\\\rm I =\frac{120}{9.6}\\\\\ I= 12.5 A[/tex]

Hence the current in the hairdryer will be 12.5 A.

To learn more the ohm's law refer to the link;

https://brainly.com/question/796939

Answer:

C) a powerful magnet

Explanation:

The electric current running through the wire coil in an electric motor exerts force directly onto A) the battery. B) an aluminum axle. C) a powerful magnet. D) a rubber insulator.

when current is pass to the coil, an electromagnetic force field is produced. The electromagnetic force field produced then have an impact on the magnet which drives the shaft to move

The pressure exerted by a phonograph needle on a record, if the equivalent of 1g is supported by the needle with a radius of 0.210 mm, is approximately 7.05*10^7 Pa or N/m².

The pressure exerted by a phonograph needle on a record is calculated using the formula for pressure: P = F / A . To obtain the force (F), we multiply the mass of the needle (1g or 0.001 kg) by the acceleration due to gravity (9.8 m/s²). This yields a force of 0.0098 N. The area (A) is calculated using the formula for the area of a circle, A=πr², where r is the radius of the needle tip (0.210 mm or 0.00021 m). So, the area amounts to roughly 0.000000139 m². The resulting pressure (P), when calculated comes out to be approximately 7.05*10^7 Pa or N/m².

https://brainly.com/question/36302202

#SPJ3

The maximum theoretical efficiency of a steam turbine operating at a boiler temperature of 450 K and an exhaust temperature of 300 K, as calculated by the Carnot efficiency, is approximately 33%.

The efficiency of a heat engine like a steam turbine can be evaluated using the Carnot efficiency formula. The Carnot efficiency formula is 1 - Tc/Th where Tc is the cold reservoir temperature (exhaust temperature) and Th is the hot reservoir temperature (boiler temperature). Given in the problem, Tc=300K and Th=450K:

Efficiency = 1 - Tc/Th

= 1 - 300 K / 450 K = 1 - 0.67 approximately

So, the maximum theoretical efficiency of the steam turbine would be about 33% according to the Carnot efficiency.

https://brainly.com/question/33897912

#SPJ11

The fluid's depth in the cylinder can be determined using the equation for fluid pressure, h = P / (pg), and plugging in given values, resulting in an approximated depth of 20.9 meters.

The total absolute pressure at a point in a fluid is the sum of the atmospheric pressure and the pressure due to the fluid above the point of reference. The latter is given by the equation P = pgh, where p is the density of the fluid, g is the acceleration due to gravity and h is the height (or depth) of the fluid column above the point of reference. In this scenario, we know P (absolute pressure, 115 kPa), p (density, 560 kg/m3), and g (standard gravity, roughly 9.81 m/s2), and we want to find h.

To find h, we can rearrange our equation: h = P / (pxg) . Plugging the given values we have h=115000Pa/(560kg/m3*9.8m/s2), which gives h = 20.9 m.

This means the depth of the fluid in the cylinder is approximately 20.9 meters.

https://brainly.com/question/10269912

#SPJ12

Answer:

road erosion, house construction, steep slope cultivation, tourism development, and animal trampling.

Explanation:

Final answer:

The width of the slit when violet light of 415 nm wavelength creates a central diffraction peak of 9.90 cm on a screen 2.53 m away is approximately 10.6 μm.

Explanation:

The wavelength of violet light is given as 415 nm, and it produces a diffraction pattern with a central peak width of 9.90 cm on a screen 2.53 meters away. We can find the width of the slit using the formula for single-slit diffraction:

Δy = λL/a

where Δy is the width of the central peak, λ is the wavelength, L is the distance to the screen, and a is the width of the slit. Rearranging the formula to solve for a, we have:

a = λL/Δy

Substituting the provided values:

a = (415 x 10^-9 m)(2.53 m) / (9.90 x 10^-2 m)

After calculating, we find that the width of the slit (a) is approximately:

a ≈ 1.06 x 10^-5 m or 10.6 μm

Using the single-slit diffraction formula and given values, we calculate the width of the slit to be 21.1 μm.

To solve this problem, we'll use the formula for the width of the central peak in a single-slit diffraction pattern:

Where:

Rearranging the formula to solve for a:

Substituting the given values:

Now, calculate:

Therefore, the width of the slit is 21.1 μm.

To find the resistance of a parallel circuit with n identical resistors, divide the resistance of one resistor by n.

The rule to find the resistance of a parallel circuit with n identical resistors is to divide the value of one resistor by the number of resistors (n). So, the formula is Requiv = R/n, where R is the resistance of one resistor and n is the number of resistors in parallel.

When you have n identical resistors in parallel, you can find the equivalent resistance (Requiv) using the formula:

Requiv = R / n

Where:

Requiv is the equivalent resistance of the parallel combination.

R is the resistance of one individual resistor.

n is the number of identical resistors in parallel.

This formula simplifies the calculation and is useful when you want to determine the overall resistance in a parallel circuit, which is a common scenario in electrical circuits and electronics.

https://brainly.com/question/32615438

#SPJ3

The work done by two moles of an ideal gas compressed isothermally in a cylinder can be calculated using the formula W = nRT ln(V1/V2). The work is generally negative as the gas does work on its surroundings during the process.

When an ideal gas is compressed in a cylinder, the work done by the gas can be calculated using the principles of thermodynamics. Specifically, if the gas is compressed isothermally (at a constant temperature), the work done by the gas during this process can be calculated using the formula W = nRT ln(V1/V2), where n represents the number of moles of gas, R is the universal gas constant, T is the temperature in Kelvin, and V1 and V2 are the initial and final volumes of the gas respectively.

In the scenario presented, we have 2 moles of gas, a temperature of 80.0°C, and the original pressure being tripled during the compression. This tripling of pressure corresponds to reduction in volume to one third. From these values, we can calculate the work done by the gas during compression. However, we do not have specific information about the volumes or pressures, so we cannot calculate a numerical value. In general, though, we can say the work done by the gas during an isothermal process is negative, as it is compressed and does work on its surroundings.

https://brainly.com/question/32263955

#SPJ11

Cyclonic storm -gradpoint