Identify each of the following mixtures as either homogeneous or heterogeneous and as a solution, a suspension, or a colloid.
Blood
homogeneous heterogeneous solution colloid suspension
Salad dressing
homogeneous heterogeneous solution colloid suspension
PLEASE HELP!!!!
blood: heterogeneous and suspension
salad dressing: heterogeneous and suspension
In the simulation, open the micro mode, then select solutions indicated below from the dropdown above the beaker in the simulation. the beaker will fill up to the 0.50 l mark with the solution at 25 ∘c. arrange the acids in increasing order of acidity. rank from lowest to highest. to rank items as equivalent, overlap th
explanation :
pH values of all :
battery acid pH = 1.0
vomit pH = 2.0
soda pop pH = 2.5
orange juice pH = 3.5
coffee pH = 5.0
milik pH = 6.5
pH value is lesser acidity is more . high pH indicate lesser acidic nature
Final answer:
Explanation of the increasing freezing points of aqueous solutions including acetic acid, NaCl, sucrose, and CaCl₂.
Explanation:
Arrange the aqueous solutions in increasing freezing points:
0.3 m acetic acid
0.2 m NaCl
0.2 m sucrose
0.1 m CaCl₂
Why is it important to know what temperature scale is being used in a given situation?
Write the electron configuration for ni2+. use the buttons at the top of the tool to add orbitals in order of orbital filling, starting at the bottom with the lowest-energy orbitals. click within an orbital to add electrons. g.com
The electron configuration for Ni²⁺ is [Ar] 3d⁸.
Nickel (Ni) has an atomic number of 28, which means that it has 28 protons in its nucleus. It also has 28 electrons, which are arranged in shells around the nucleus.
The electron configuration for a neutral nickel atom is:
[Ar] 3d⁸ 4s²
The argon (Ar) core is filled with 18 electrons, and the remaining 10 electrons are arranged in the 3d and 4s orbitals.
When nickel loses two electrons to form Ni²⁺, the two electrons that are lost are the two 4s electrons. This leaves the 8 3d electrons behind, which gives Ni²⁺ the electron configuration shown above.
To know more about the Electron configuration, here
https://brainly.com/question/17270375
#SPJ6
How many times greater is the rate of effusion of molecular fluorine than that of molecular bromine at the same temperature and pressure
Sodium-24 has a half-life of 14.8 hours. how much of a 227.0 mg sodium-24 sample will remain after 3.7 days?
Final answer:
After 3.7 days, approximately 3.54mg of the original 227.0mg Sodium-24 sample will remain when considering its half-life of 14.8 hours. This is calculated by determining the number of half-life periods that occur in 3.7 days and applying the power of this number to half the mass to represent the consistent halving of the sample
Explanation:
The question is about the concept of half-life and how it applies to a sample of Sodium-24. Sodium-24 has a half-life of 14.8 hours, which means every 14.8 hours, half of the Sodium-24 atoms decay. Therefore, to find out how much of a 227.0 mg sample remains after 3.7 days, we need to first convert the days into hours (3.7 days * 24 hours/day = 88.8 hours) and then divide this by the half-life of Sodium-24 (88.8 hours / 14.8 hours/half-life = ~6 half-lives).
Given that half of the material decays each half-life period, we calculate: 227.0 mg * (1/2)^6 = ~3.54 mg. So, approximately 3.54 mg of the original Sodium-24 sample would remain after 3.7 days.
Learn more about Half-life here:
https://brainly.com/question/24710827
#SPJ11
Write a balanced nuclear equation for the beta decay of thallium-210.
Final answer:
The beta decay of thallium-210 results in the conversion of the thallium nucleus into a lead-210 nucleus, with the emission of a beta particle and an antineutrino.
Explanation:
The beta decay of thallium-210 involves the transformation of a neutron into a proton, with the emission of an electron (beta particle) and an antineutrino. The balanced nuclear equation for this process can be written as follows:
^{210}_{81}Tl →
^{210}_{82}Pb +
^-1_{0}e (or β^-) + ar{ν}_e
Here, thallium-210 (Tl-210) undergoes beta decay to become lead-210 (Pb-210), with the emission of a beta particle (β^-) and an antineutrino (ν_e).
Atomic weight of gold is 197.2 ami
Calculate no of gram atoms in 7.5g of gold
To find the number of gram atoms in 7.5g of gold, divide the mass by the molar mass of gold, which gives approximately 0.03807 moles of gram atoms.
The student was asked to calculate the number of gram atoms in 7.5g of gold where the atomic weight of gold is given as 197.2 amu (atomic mass unit). We use the concept of molar mass to answer this question. The molar mass of gold (Au) is about 197.0g/mol, and we know that one mole of any substance contains Avogadro's number of atoms, which is 6.022 x 1023 atoms/mol.
To find the number of moles (or gram atoms) in 7.5g of gold, we use the formula:
Number of moles = Mass (g) / Molar mass (g/mol)
Substituting the values, we get:
Number of moles = 7.5g / 197.0g/mol ≈ 0.03807 mol
Therefore, there are about 0.03807-gram atoms in 7.5g of gold.
13) Given the redox reaction: Cr3+ + Al Cr + Al3+ As the reaction takes place, there is a transfer of A) electrons from Al to Cr3+ B) electrons from Cr3+ to Al C) protons from Al to Cr3+ D) protons from Cr3+ to Al
What is the concentration of an hbr solution if 12.0 ml of the solution is neutralized by 15.0 ml of a 0.25 m koh solution?
The concentration of the HBr solution is approximately 0.3125 M.
Explanation:To find the concentration of the HBr solution, we can use the equation:
M1V1 = M2V2
where M1 is the concentration of the KOH solution (given as 0.25 M), V1 is the volume of the KOH solution (given as 15.0 mL), M2 is the concentration of the HBr solution (what we're trying to find), and V2 is the volume of the HBr solution (given as 12.0 mL).
Plugging in the values:
(0.25 M)(15.0 mL) = M2(12.0 mL)
Simplifying:
3.75 = 12M2
Dividing both sides by 12:
M2 = 3.75/12 ≈ 0.3125 M
Therefore, the concentration of the HBr solution is approximately 0.3125 M.
a part of the periodic table is shown below. which of the following elements is less reactive then the others?
Explanation:
its the third one down :)
H2SO4 + NH3 HSO4 - + NH4 + 12. H2SO4 goes to HSO4 - a) Did it gain or lose a proton? _________ b) Is it a Brønsted -Lowery acid or base? ___________ 13. NH3 goes to NH4 + a) Did it gain or lose a proton? ___________ b) Is it a Brønsted -Lowery acid or base? _________
Sulfuric acid loses a proton and acts as a Brønsted-Lowry acid, while ammonia gains a proton and becomes a Brønsted-Lowry base in their respective reactions.
In the reaction between sulfuric acid (H2SO4) and ammonia (NH3), when H2SO4 becomes HSO4-, it loses a proton. This change makes it a Brønsted-Lowry acid because a Brønsted-Lowry acid donates a proton in an acid-base reaction. On the other hand, when NH3 becomes NH4+, it gains a proton, which makes it a Brønsted-Lowry base, since a Brønsted-Lowry base accepts a proton.
Are the statements about hydrogen bonding of the compound below with water true or false? this compound can act as a hydrogen-bond donor. this compound can act as a hydrogen-bond acceptor
Methanol (CH₃OH) can act as both a hydrogen bond donor and acceptor due to its hydrogen atom bonded to electronegative oxygen and the oxygen's two lone pairs of electrons. This enables methanol to form a network of hydrogen bonds with water, affecting its physical properties.
The compound that can act as both a hydrogen bond donor and a hydrogen bond acceptor is methanol (CH₃OH). It contains a hydrogen atom attached to oxygen (making it a hydrogen bond donor) and two lone pairs of electrons on the oxygen (making it a hydrogen bond acceptor). A substance, like methanol, that can both donate a hydrogen atom and accept a hydrogen bond due to these features can participate in hydrogen bonding with water.
To assess whether a compound can act as a hydrogen bond donor or acceptor, one should look for a hydrogen atom bonded to a highly electronegative atom like oxygen, nitrogen, or fluorine; this structure facilitates hydrogen bond donation. For a compound to act as an acceptor, one should identify the presence of lone pairs of electrons on a highly electronegative atom, which can attract the hydrogen atom from another molecule.
Methanol's ability to act in both capacities allows it to form a network of hydrogen bonds with water molecules, thus affecting properties such as the boiling point and solubility. When drawing the hydrogen-bonded structure, we would show lines or dotted lines between the hydrogen of one methanol molecule and the oxygen of another methanol molecule or of a water molecule to represent the hydrogen bonds.
If you add 500 kj of heat to 500 g of water at 50.0°c, how much water is left in the container? the latent heat of vaporization of water is 2.26 ×103 j/g and its specific heat is is 4.190 j/(g∙k)
What mass of hcl gas must be added to 1.00 l of a buffer solution that contains [aceticacid]=2.0m and [acetate]=1.0m in order to produce a solution with ph = 4.11?
To achieve a pH of 4.11 in the given buffer solution, approximately 15.71 grams of HCl gas need to be added.
To determine the mass of HCl gas needed to achieve the desired pH in the buffer solution, we can use the Henderson-Hasselbalch equation:
pH = pKₐ + log([A⁻] / [HA])
For acetic acid (CH₃COOH), the pKₐ is approximately 4.76. Given: [HA] = 2.0 M (acetic acid), [A-] = 1.0 M (acetate), and the target pH is 4.11, we can set up the equation:
4.11 = 4.76 + log([A⁻] / [HA])
Rearranging to solve for the ratio [A⁻]/[HA]:
4.11 - 4.76 = log([A⁻] / [HA])
-0.65 = log([A⁻] / [HA])
[A⁻] / [HA] = [tex]10^-^0^.^6^3[/tex] ≈ 0.234
Next, let x be the number of moles of HCl gas added. HCl will convert acetate (A⁻) to acetic acid (HA):
(1.0 - X) / (2.0 + X) = 0.234
Solving for X: multiply both sides by (2.0 + X):
1.0 - x = 0.234 x (2.0 + X)
1.0 - x = 0.468 + 0.234X
1.0 - 0.448 = 0.224X + X
0.532 = 1.234X
X ≈ 0.431
Thus, moles of HCl needed are approximately 0.431 moles. Using the molar mass of HCl (36.46 g/mol), we can calculate the mass:
Mass of HCl = 0.431 mol x 36.46 g/mol ≈ 15.71g
A certain half-reaction has a standard reduction potential . an engineer proposes using this half-reaction at the anode of a galvanic cell that must provide at least of electrical power. the cell will operate under standard conditions. note for advanced students: assume the engineer requires this half-reaction to happen at the anode of the cell.
From left to right, identify the hybridization on the carbons in ch3cn.
The first carbon in CH3CN is sp3 hybridized, due to its four single bonds and tetrahedral geometry, while the second carbon is sp hybridized, having a triple bond and a single bond resulting in a linear geometry.
Explanation:To determine the hybridization of the carbon atoms in CH3CN, we must examine the bonding around each carbon. Starting with the CH3 group, the first carbon is bonded to three hydrogen atoms and has a single bond with the second carbon. This suggests an sp3 hybridization, which is typical for carbons with four single bonds and leads to a tetrahedral geometry. Proceeding to the carbon in the CN group, it has a triple bond with nitrogen and a single bond to the first carbon. This configuration means it is sp hybridized, as there are two electron groups around it resulting in a linear geometry.
Therefore, from left to right, the hybridization of the carbons in CH3CN are sp3 and sp.
The study of chemistry physics and astronomy are closely related true or false
Answer:
True, they are closely related.
Explanation:
Because they both sometimes are related to the same thing.
An industrial chemist introduces 8.1 atm h2 and 8.1 atm co2 into a 1.00-l container at 25.0°c and then raises the temperature to 700.0°c, at which keq = 0.534: h2(g) + co2(g) ⇔ h2o(g) + co(g) how many grams of h2 are present after equilibrium is established?
What volume (in liters) does 3.91 moles of nitrogen gas at 5.35 atm and 323 K occupy
Answer:
19.4
Explanation:
Answer:
19.4
Explanation:
Phosphorus-32 has a half-life of 14.3 days. how many grams remain from a 10.0 gram sample after 30.0 days?
Answer: 2.23 grams
Explanation:
Radioactive decay follows first order kinetics.
Half-life of Phosphorus-32 = 14.3 days
[tex]\lambda =\frac{0.693}{t_{\frac{1}{2}}}=\frac{0.693}{14.3}= 0.05days^{-1}[/tex]
[tex]N=N_o\times e^{-\lambda t}[/tex]
N = amount left after time t= ?
[tex]N_0[/tex] = initial amount = 10.0 g
[tex]\lambda[/tex] = rate constant= [tex]0.05days^{-1}[/tex]
t= time = 30 days
[tex]N=10\times e^{- 0.05 days^{-1}\times 30days}[/tex]
[tex]N=2.23g[/tex]
The coordinate plane is separated into four quadrants as shown. let p: x < 0 let q: y < 0 what is represented by p ∨ q?
quadrant 1 because both x and y are positive coordinates
quadrant 3 because both x and y are negative coordinates
quadrants 1, 2, and 4 because in these quadrants x, y, or both are positive coordinates
quadrants 2, 3, and 4 because in these quadrants x, y, or both are negative coordinates
The correct option is C which is it is the third coordinate because p and q both are negative.
Explanation:If we look at the four quadrants of coordinate plane:
Quadrant 1: If x and y both are positive.Quadrant 2: If x is negative and y is positive.Quadrant 3: If both x and y are negative.Quadrant 4: If x is positive and y is negative.So according to given data, x is less than 0 means xis negative. y is also negative because y is less than 0.
So both x and y are negative and it is in quadrant 3.
Answer:
Quadrant II, because the slope is positive and the y intercept is negative
Explanation:
The main interactions between molecules of hydrogen chloride are examples of
The main interactions between molecules of hydrogen chloride are examples of dipole-dipole interactions, specifically hydrogen bonding.
Explanation:Hydrogen chloride (HCl) is a polar molecule, which means it has a partially positive end (hydrogen) and a partially negative end (chlorine). The main interactions between molecules of hydrogen chloride are examples of dipole-dipole interactions, specifically hydrogen bonding. These interactions occur when the partially positive hydrogen atom in one molecule is attracted to the partially negative end of another molecule, creating a bond between them.
Learn more about Hydrogen chloride interactions here:https://brainly.com/question/9901358
#SPJ6
Describe what changes occur during electron capture. describe what changes occur during electron capture. the mass number and atomic number increases. the mass number and atomic number decreases. the mass number is unchanged and the atomic number decreases. the mass number and atomic number do not change. the mass number is unchanged and the atomic number increases.
Electron capture is a nuclear process where an inner shell electron combines with a proton, creating a neutron and resulting in a decrease in atomic number while keeping the mass number unchanged. The process generates energy often in the form of an X-ray. An example of this is seen in potassium-40, wherein electron capture transforms it into a different nuclide.
Explanation:Electron capture is a process during which an inner shell electron combines with a proton in the nucleus and transforms into a neutron. This results in the creation of a vacancy within the atom, which is then filled by an electron from an outer shell. This electron, as it falls into the vacancy, releases energy, often in the form of an X-ray.
One significant outcome of electron capture is that the atomic number of the atom decreases by one, while the mass number remains unchanged. This happens because the process effectively converts a proton into a neutron within the atomic nucleus. Thus, the atom moves closer to the band of stability, improving the neutron to proton (n:p) ratio.
For instance, in the case of potassium-40, the atom undergoes electron capture, transforming it into a different nuclide with an atomic number one less than the original, and an unchanged mass number.
Learn more about Electron Capture here:https://brainly.com/question/11689871
#SPJ5
what is the most susceptible to damage from ionizing radiation. sorft tissue, paper, wood, lead
Ionizing radiation is most damaging to soft tissue among the materials listed (soft tissue, paper, wood, lead) due to its ability to break chemical bonds and cause cell malfunctions. However, the impact largely depends on the type of radiation and the characteristics of the material.
Explanation:The effects of ionizing radiation on materials largely depend on the type of radiation and the characteristics of the material. Ionizing radiation is harmful as it can ionize molecules or break chemical bonds, causing malfunctions in cell processes. This can lead to somatic or genetic damage, particularly in rapidly reproducing cells.
In terms of the materials listed, soft tissue is the most susceptible to damage from ionizing radiation. Materials like paper, wood, and lead have different degrees of resistance to ionizing radiation. Paper and wood can block alpha and beta particles, low-energy forms of ionizing radiation, while metal or lead can stop gamma radiation, a high-energy form of ionizing radiation, more effectively.
However, it's crucial to note that ionizing radiation has its greatest effect on cells that rapidly reproduce. Therefore, in living organisms, areas with rapidly dividing cells, such as the skin or the lining of the stomach or intestines, are especially susceptible to damage from ionizing radiation.
Learn more about Ionizing Radiation here:https://brainly.com/question/9621276
#SPJ6
Which part of an atom is most directly involved in chemical bonding?
Chemical bonding is defined as the attraction between elements, ions or molecules which results in the formation of compounds. The bonding takes place due to sharing of electrons as in covalent bond or by the electrostatic force of attraction between positive charge ion (cation) and negative charge ion (anion) as in ionic bond.
Now, electrons are the negative charged particles of an atom and it is found in clouds which is surrounded by the nucleus of an atom. Electrons play a vital role in chemical bonding. In both type of bonding i.e. ionic bonding in which electrons are transferred from on atom to other atom and covalent bonding which results due to sharing of electrons between two atoms.
Thus, electron is a part of an atom is most directly involved in chemical bonding.
Balance this equation. If a coefficient of "1" is required, choose "blank" for that box. CH3OH + O2 → CH2O + H2O
Answer:
look at the screenshot below
Explanation:
Find the empirical and molecular formula for a molar mass of 60.10g/mol; 39.97% carbon 13.41% hydrogen: 46.62% nitrogen
) determine the theoretical yield and the percent yield if 21.8 g of k2co3 is produced from reacting 27.9 g ko2 with 29.0 l of co2 (at stp). the molar mass of ko2 = 71.10 g/mol and k2co3 = 138.21 g/mol.
Answer : The theoretical yield of [tex]K_2CO_3[/tex] = 27.089 g
The percent yield of [tex]K_2CO_3[/tex] is, 80.47 %
Explanation : Given,
Mass of [tex]KO_2[/tex] = 27.9 g
Volume of [tex]CO_2[/tex] = 29.0 L (At STP)
Molar mass of [tex]KO_2[/tex] = 71.10 g/mole
Molar mass of [tex]CO_2[/tex] = 44 g/mole
Molar mass of [tex]K_2CO_3[/tex] = 138.21 g/mole
First we have to calculate the moles of [tex]CO_2[/tex] and [tex]KO_2[/tex].
At STP,
As, 22.4 L volume of [tex]CO_2[/tex] present in 1 mole of [tex]CO_2[/tex]
So, 29.0 L volume of [tex]CO_2[/tex] present in [tex]\frac{29.0}{22.4}=1.29[/tex] mole of [tex]CO_2[/tex]
[tex]\text{Moles of }KO_2=\frac{\text{Mass of }KO_2}{\text{Molar mass of }KO_2}=\frac{27.9g}{71.10g/mole}=0.392mole[/tex]
Now we have to calculate the limiting and excess reagent.
The balanced chemical reaction is,
[tex]4KO_2+2CO_2\rightarrow 2K_2CO_3+3O_2[/tex]
From the balanced reaction we conclude that
As, 4 moles of [tex]KO_2[/tex] react with 2 mole of [tex]CO_2[/tex]
So, 0.392 moles of [tex]KO_2[/tex] react with [tex]\frac{2}{4}\times 0.392=0.196[/tex] moles of [tex]CO_2[/tex]
From this we conclude that, [tex]CO_2[/tex] is an excess reagent because the given moles are greater than the required moles and [tex]KO_2[/tex] is a limiting reagent and it limits the formation of product.
Now we have to calculate the moles of [tex]K_2CO_3[/tex].
As, 4 moles of [tex]KO_2[/tex] react to give 2 moles of [tex]K_2CO_3[/tex]
So, 0.392 moles of [tex]KO_2[/tex] react to give [tex]\frac{2}{4}\times 0.392=0.196[/tex] moles of [tex]K_2CO_3[/tex]
Now we have to calculate the mass of [tex]K_2CO_3[/tex].
[tex]\text{Mass of }K_2CO_3=\text{Moles of }K_2CO_3\times \text{Molar mass of }K_2CO_3[/tex]
[tex]\text{Mass of }K_2CO_3=(0.196mole)\times (138.21g/mole)=27.089g[/tex]
The theoretical yield of [tex]K_2CO_3[/tex] = 27.089 g
The actual yield of [tex]K_2CO_3[/tex] = 21.8 g
Now we have to calculate the percent yield of [tex]K_2CO_3[/tex]
[tex]\%\text{ yield of }K_2CO_3=\frac{\text{Actual yield of }K_2CO_3}{\text{Theoretical yield of }K_2CO_3}\times 100=\frac{21.8g}{27.089g}\times 100=80.47\%[/tex]
Therefore, the percent yield of [tex]K_2CO_3[/tex] is, 80.47 %
The theoretical yield of K₂CO₃ is 54.17 g and the percent yield is 40.24%.
Percent yield is the percent ratio of actual yield to the theoretical yield. It is calculated to be the experimental yield divided by theoretical yield multiplied by 100%. If the actual and theoretical yield are the same, the percent yield is 100%
In chemistry, yield is a measure of the quantity of moles of a product formed in relation to the reactant consumed, obtained in a chemical reaction, usually expressed as a percentage.
Given,
Mass of K₂O = 27.9g
Molar Mass of K₂O = 71.1 g/mol
Mass of CO₂ = 29.01g
The reaction can be written as -
K₂O + CO₂ = K₂CO₃
Moles of K₂O = 27.9 / 71.1 = 0.392 moles
Moles of CO₂ = 29 / 22.4 = 1.29 moles
Since moles of K₂O is lesser, it is the limiting reagent.
From the reaction, 1 mole of K₂O gives 1 mole of K₂CO₃
so, 0.392 moles of K₂CO₃ is produced.
Theoretical yield of K₂CO₃ = 0.392 × 138.21 = 54.17 g
Actual yield = 21.8 g
Percent yield = (21.8 / 54.17) × 100
= 40.24%
Learn more about Percent yield, here:
https://brainly.com/question/29200507
#SPJ6
Calculate the volume in liters of a ×4.3910−5/moll mercury(ii) iodide solution that contains 500.mg of mercury(ii) iodide hgi2 . round your answer to 3 significant digits.
Final answer:
To calculate the volume of the mercury(II) iodide solution in liters, convert the mass of the solute to moles and use the Molarity equation. The volume is approximately 25.1 L.
Explanation:
To calculate the volume in liters of the mercury(II) iodide solution, we need to convert the mass of the solute (HgI2) to moles, using the molar mass of HgI2. Then, we can use the equation Molarity = moles of solute / volume of solution in liters to find the volume.
First, calculate the moles of HgI2:
Moles = mass / molar mass = 500 mg / (454.39 g/mol) = 1.101 x 10^-3 mol
Next, rearrange the equation to solve for volume:
Volume = moles of solute / Molarity = 1.101 x 10^-3 mol / (4.3910^-5 M) = 25.07 L
Rounding to three significant digits, the volume of the solution is approximately 25.1 L.